The i1000D Small Foot Print Systems

One Testhead for Both Inline and Offline • No more investment waste • Field Upgradeable • Fully Agilent

Introducing the new SFP i1000D… and our new features

Smallest ICT In the World • 850mm in length • Largest bottom side clearance • ICT with full powered testing

capabilities

1. Small foot print

2. Better press down unit section

3. Fixture interface

4. Nice area to place the next DUT

5. Upgrade path to Inline

6. Offline fixture compatible for Inline

system

7. Fixture Adaptor to existing i1000D

fixture available

The offline SFP i1000D

The i1000D SFP Fixture Interface

New Fixture Interface – With Fixtures

96-pin DIN connector Aluminum

frame

96-pin Male DIN

Flat Ribbon Cables

Fixture bottom plate 96 female DIN (22mm pin)

And this is how the fixture looks like now

The fixture structure has became stronger with 4 aluminum frames. • Similar structure with most of the ICT systems • Fixture houses will find it much easier to fabricate fixture kits • Some selected fixture houses can produce the kits in large volume. The wiring gets more standard (like other ICT) because it is just top-bottom wiring connection.

The current fixture suppliers are: • HonHan in China • Interlatin in Mexico • ECT in Europe We are looking forward to working with more partners, but partners will not be interested without a real fixture order.

The Enclosed Press Down Unit for Better Safety

i1000D SFP Press Down Unit Section

Fully covered fixturing space • Clean, simple and bright

Curtain sensors that provides best safety

Newly designed button table • Finally enough room for the next DUT

Sensors on side and back doors • System stops when opened

And no more ESD issues!

SFP Inline Fixture SFP Offline Fixture

i1000D SFP Press Down Unit Section

Fixtures are compatible

Key specifications

Agilent i1000D SFP Offline

Dimension 850mm (L)* 900mm (W)* 1900 (H)

Max node count 1,664

Max PCB size 430mm (L)* 300mm (W)

Top side Clearance 150mm

Bottom side Clearance 40mm

Fixture Action Press-down, Dual Stage

Fixture Interface One-button-engage DIN Interface

Press Pressure 6kN ~ 8kN, (6kg/cm2 ~ 8kg/cm2)

DUT Power Supplies N6751*4 (400W) or N6774*4 (1200W)

Operating System Windows 7 32/64 bits

Use the Fixture Adaptor - Back

Fixture adaptor cable with numbers

Plug in the cables to the existing fixtures N6700 DUT power supply is also converted.

Full Agilent product

Full Agilent support

Field upgradeable from offline

Conveyor widening mechanism

Introducing the i1000D SFP Inline

1. 40mm bottom side clearance 2. Conveyor up/down mechanism 3. Board marker control *7 4. Fixture interface 5. Conveyor speed – 300mm/sec

(roughly 3 seconds) 6. PCB exchange in 6 seconds

Compared to a 2,400mm bridge type handler system, conveyor time is reduced for at least 5 sec.

What are the features – why people will like it?

DUT

Conveyor widening mechanism

Test Access Test Access

Conveyor

Fixture

Support plate Probes Probes

Potential Keep out conflicts might happen Our conveyor widens for preserving test coverage when access is on the edges

Support plate = 5mm

Shift = 5mm

High Bottom Side Component Clearance

The IPC SMEMA has a 25mm standard bottom clearance. The SFP inline has 40mm.

The only inline ICT system that can handle long connector pins in the industry.

Conveyor

Fixture

Support plate

40mm >60mm

Conveyor from The Side

Board Stopper Design

Conveyor

Fixture

Support plate

Board Stopper

When board stopper moves upright, it will hit the pin – topside clearance issue.

Board Stopper

Topside clearance can only be achieved with a board stopper from the side.

Board Stopper

Board Stopper Design

Conveyor Width Adjustment

Key specifications

Agilent i1000D SFP Inline

Dimension 850mm (L)* 900mm (W)* 1900 (H)

Conveyor height 920mm – 1020mm

PCB edge 3mm

Max PCB size 430mm (L)* 300mm (W)

Top side Clearance 100mm

Bottom side Clearance 40mm

PCB weight 3kg

Conveyor direction L R or R L

Conveyor speed 300mm/sec ~ 500mm/sec

PCB exchange time 6 seconds

Fixture Action Press-down, Dual Stage

Press Pressure 6kN ~ 8kN, (6kg/cm2 ~ 8kg/cm2)

Q&A