I space iden component indentification
Click here to load reader
-
Upload
sytech-corporation -
Category
Technology
-
view
33 -
download
2
description
Transcript of I space iden component indentification
External connections available via-DB 15(F)Pin 1: Output, RS-232, CDPin 2: Output, RS-232, TXDPin 3: Input, RS-232, RXDPin 4: Input, RS-232, DTRPin 5: GroundPin 6: NCPin 7: Output, 128mVrms, Audio (balanced)Pin 8: Input, 43.5mVrms, Audio (balanced)Pin 9: Output, RS-232, DSRPin 10: Input, RS-232, RTSPin 11: Output, RS-232, CTSPin 12: Output, RS-232, RIPin 13: GroundPin 14: Output, 128mVrms, Audio (balanced)Pin 15: Input, 43.5mVrms, Audio (balanced)
RF ConnectorType: TNC(F)Impedance: 50 Ohms
Enabled (To the Left)
Disabled (To the Right)
iDEN Module Function Switch
Enabled
Disabled
Status Indicators3VDC 4VDCRXD TXDRed Status Green Status
Status Indicators3VDC LED: Steady Green 3VDC OK4VDC LED: Steady Green 4VDC OKRXD LED: Flickering Yellow Data from HostTXD LED: Flickering Yellow Data to HostRed Status LED: See BelowGreen Status LED: See Below
Alternating Red and Green – FlashstrapFatal Error was detected during power-up.
Flashing Red – Registering, the device is registering with the carrier’s network. Pleas wait.
Steady Red – No Service.
Flashing Red and Green (together) – Unit registered, No packet data service. (no phone service).
Flashing Green – In Full service (phone, DC, GC)
Steady Green – In Use.
SyTech iSPACE: Component Indentification
SyTech ProprietySystem Illustration: For System Comprehension OnlyActual Products, Configuration and Images May Change without NotificationDrawing may or may not be complete. Working drawing, not a final representation.