Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda...
-
Upload
leslie-cunningham -
Category
Documents
-
view
215 -
download
0
Transcript of Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda...
![Page 1: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/1.jpg)
Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers
S. I. Abdel-Khalik and M. Yoda
IAEA Meeting - Vienna (November 2003)
G. W. Woodruff School ofMechanical Engineering
Atlanta, GA 30332–0405 USA
![Page 2: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/2.jpg)
2
OUTLINE
• Introduction – Problem Definition
Description of Liquid Protection Concept
• The Wetted Wall Concept
Numerical Studies
Experimental Verification
• Forced Liquid Film Concept
• Thick Oscillating Slab Jets (HYLIFE) Concept
![Page 3: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/3.jpg)
3
Wetted Wall Concept--Problem Definition
Liquid Injection
Prometheus: 0.5 mm thick layer of liquid lead injected normally through porous SiC structure
X-rays and Ions
~ 5 m First Wall
![Page 4: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/4.jpg)
4
Forced Film Concept -- Problem Definition
First Wall
Injection Point
DetachmentDistance xd
Forced Film
X-rays and Ions
Prometheus: Few mm thick Pb “forced film” injected tangentially at >7 m/s over upper endcap
~ 5 m
![Page 5: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/5.jpg)
5
• Oscillating sheets create protective pocket to shield chamber side walls
• Lattice of stationary sheets (or cylindrical jets) shield front/back walls while allowing beam propagation and target injection
Turbulent Liquid Sheets
Pictures courtesy P.F. Peterson, UCB
HYLIFE-II: Use slab jets or liquid sheets to shield IFE chamber first walls from neutrons, X-rays and charged particles.
Oscillating slabs
Cylindricaljets
Beam-tubevortices
![Page 6: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/6.jpg)
6
Thin Liquid Protection
Major Design Questions
• Can a stable liquid film be maintained over the entire surface of the reactor cavity?
• Can the film be re-established over the entire cavity surface prior to the next target explosion?
• Can a minimum film thickness be maintained to provide adequate protection over subsequent target explosions?
Study wetted wall/forced film concepts over “worst case” of downward-facing surfaces
![Page 7: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/7.jpg)
7
Numerical Simulation of Porous Wetted WallsSummary of Results
Quantify effects of• injection velocity win
• initial film thickness zo
• Initial perturbation geometry & mode number
• inclination angle • Evaporation & Condensation at the interface
on• Droplet detachment time
• Equivalent droplet diameter
• Minimum film thickness prior to detachment
Obtain Generalized Charts for dependent variables as functions of the Governing non-dimensional parameters
![Page 8: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/8.jpg)
8
Numerical Simulation of Porous Wetted WallsEffect of Evaporation/Condensation at Interface
*=31.35
mf+=-0.005
(Evaporation)
*=25.90
mf+=0.01
(Condensation)
*=27.69
mf+=0.0
• zo*=0.1, win
*=0.01, Re=2000
![Page 9: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/9.jpg)
9
Numerical Simulation of Porous Wetted WallsWetted Wall Parameters
• Length, velocity, and time scales :
L G/ ( )l g oU g l o o/t l U
*d o/t t
*min min / l
*o o /z z l
*in in o/w w U
• Nondimensional drop detachment time :
• Nondimensional minimum film thickness :
• Nondimensional initial film thickness :
• Nondimensional injection velocity :
![Page 10: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/10.jpg)
10
1
2
3
4
5
6
7
8
9
1011
4
3
Experimental Validations
Flow
Reservoir level
1 Constant-head supply tank w/var. height2 Perforated tube3 Shut off valve4 Test section porous plate, 316L SS5 Sump pump6 Sub-micron filter7 Fast stirrer8 Unistrut frame9 Air relief valve10 Baffles11 Porous plate plenum
Flexible tubing
![Page 11: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/11.jpg)
11
Experimental Variables
Experimental Variables• Plate porosity
• Plate inclination angle • Differential pressure
• Fluid properties
Independent Parameters• Injection velocity, win
• “Unperturbed” film thickness, zo
Dependent Variables• Detachment time
• Detachment diameter
• Maximum penetration depth
![Page 12: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/12.jpg)
12
Experiment #W090 --Evolution of Maximum Penetration Distance
Time [sec]
Pene
trat
ion
Dep
th [
mm
]
Simulation
Experiment
![Page 13: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/13.jpg)
13
Wetted Wall Summary• Developed general non-dimensional charts applicable to
a wide variety of candidate coolants and operating conditions
• Stability of liquid film imposes Lower bound on repetition rate (or upper bound on time
between shots) to avoid liquid dripping into reactor cavity between shots
Lower bound on liquid injection velocity to maintain minimum film thickness over entire reactor cavity required to provide adequate protection over subsequent fusion events
• Model Predictions are closely matched by Experimental Data
![Page 14: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/14.jpg)
14
Forced Film Concept -- Problem Definition
First Wall
Injection Point
DetachmentDistance xd
Forced Film
X-rays and Ions
Prometheus: Few mm thick Pb “forced film” injected tangentially at >7 m/s over upper endcap
~ 5 m
![Page 15: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/15.jpg)
15
Contact Angle, LS
Glass : 25o
Coated Glass : 85o
Stainless Steel : 50o
Plexiglas : 75o
Forced Film Parameters
• Weber number We Liquid density Liquid-gas surface tension Initial film thickness Average injection speed U
• Froude number Fr Surface orientation ( = 0° horizontal surface)
• Mean detachment length from injection point xd
• Mean lateral extent W
• Surface radius of curvature R = 5 m
• Surface wettability: liquid-solid contact angle LS
• In Prometheus: for = 0 – 45, Fr = 100 – 680 over nonwetting surface (LS = 90)
(cos )
U
Frg
2
U
We
![Page 16: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/16.jpg)
16
A Flat or Curved plate (1.52 0.40 m)
B Liquid filmC Splash guardD Trough (1250 L)E Pump inlet w/ filterF PumpG FlowmeterH Flow metering valveI Long-radius elbowJ Flexible connectorK Flow straightenerL Film nozzleM Support
frame
AB
C
DEF
G
H
I
J K
L MAdjustable angle
xz
gcos g
Experimental Apparatus
![Page 17: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/17.jpg)
17
• Independent Variables Film nozzle exit dimension = 0.1–0.2 cm Film nozzle exit average speed U0 = 1.9 – 11.4 m/s Jet injection angle = 0°, 10°, 30° and 45o
Surface inclination angle ( = ) Surface curvature (flat or 5m radius) Surface material (wettability)
• Dependent Variables Film width and thickness W(x), t(x) Detachment distance xd
Location for drop formation on free surface
Experimental Parameters
![Page 18: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/18.jpg)
18
1 mm nozzle8 GPM10.1 m/s10° inclinationRe = 9200
Detachment Distance
![Page 19: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/19.jpg)
19
0
20
40
60
80
100
120
140
160
0 500 1000 1500 2000
Detachment Distance Vs. Weber Number
We
x d [
cm]
= 0
Glass (LS=25o)
Stainless Steel (LS=50o)
Plexiglas (LS=75o) Rain-X® coated glass (LS=85o)
= 1 mm
![Page 20: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/20.jpg)
20
Penetrations and Beam Ports
• Cylindrical obstructions modeling protective dams around penetrations and beam ports incompatible with forced films
• Film either detaches from, or flows over, dam
x
y
x
y
x
y
![Page 21: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/21.jpg)
21
Forced Film Summary• Design windows for streamwise (longitudinal) spacing
of injection/coolant removal slots to maintain attached protective film Detachment length increases w/Weber and Froude numbers
• Wetting chamber first wall surface requires fewer injection slots than nonwetting surface wetting surface more desirable
• Cylindrical protective dams around chamber penetrations incompatible with effective forced film protection “Hydrodynamically tailored” protective dam shapes may also fail
![Page 22: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/22.jpg)
22
• Oscillating sheets create protective pocket to shield chamber side walls
• Lattice of stationary sheets (or cylindrical jets) shield front/back walls while allowing beam propagation and target injection
Turbulent Liquid Sheets
Pictures courtesy P.F. Peterson, UCB
HYLIFE-II: Use slab jets or liquid sheets to shield IFE chamber first walls from neutrons, X-rays and charged particles.
Oscillating slabs
Cylindricaljets
Beam-tubevortices
![Page 23: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/23.jpg)
23
Thick Liquid Protection
Major Design Questions
• Is it possible to create “smooth” prototypical turbulent liquid sheets? 5 mm clearance between driver beam, sheet free surface in protective
lattice > 30 year lifetime for final focus magnets
• Can adjacent sheets, once they collide, separate and re-establish themselves before the next fusion event?
• Can the flow be re-established prior to the next fusion event? Chamber clearing Hydrodynamic source term – Beam propagation requirements
![Page 24: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/24.jpg)
24
• Pump-driven recirculating flow loop
• Test section height ~1 m
• Overall height ~5.5 m
A Pump B Bypass lineC Flow meter D Pressure gageE Flow straightenerF Nozzle G Oscillator (Not used)H Sheet I 400 gal tankJ Butterfly valve K 700 gal tank
Flow Loop
![Page 25: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/25.jpg)
25
Flow Conditioning• Round inlet (12.7 cm ID) to rectangular
cross-section 10 cm 3 cm (y z)
• Perforated plate (PP) Open area ratio 50% with staggered 4.8 mm
dia. holes
• Honeycomb (HC) 3.2 mm dia. 25.4 mm staggered circular
cells
• Fine mesh screen (FS) Open area ratio 37.1% 0.33 mm dia. wires woven w/ open cell
width of 0.51 mm (mesh size 30 30)
• 5th order contracting nozzle Contraction ratio = 3
• Note: No BL trimming
HC
PP
FS
3.8 cm
3 cm
14.6 cm
x y
z
![Page 26: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/26.jpg)
26
Experimental Parameters
= 1 cm; aspect ratio AR = 10
• Reynolds number Re = 130,000 [Uo average speed; liquid kinematic viscosity]
• Weber number We = 19,000 [L liquid density; surface tension]
• Froude number Fr = 1,400
• Fluid density ratio L /G = 850 [G gas density]
• Near-field: x / 25z
yx
![Page 27: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/27.jpg)
27
Image after thresholding, edge detection
Surface Ripple Measurements• Free surface interface between fluorescing
water and air Planar laser-induced fluorescence (PLIF)
• Free surface found w/edge detection Threshold individual images
z = standard deviation of free surface z-position spatially averaged over central 7.5 cm of flow
x
zy
g
Light sheet
CCD
Nozzle
Original image
1 cm
x y
z
![Page 28: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/28.jpg)
28
Surface Ripple: Nozzle H
z measure of average surface ripple
z / < 4.3% for
x / < 25
z essentially independent of Re
z slightly as x x /
Re = 25,000 50,000 97,000
z /
0
0.02
0.04
0.06
0 10 20 30
![Page 29: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/29.jpg)
29
Turbulent Breakup
• Turbulent primary breakup Formation of droplets along free
surface: “hydrodynamic source term”
Due to vorticity imparted at nozzle exit
• Onset of breakup, xi
Location of first observable droplets
xi as Weber number We
Flow
xi
Nozzle
![Page 30: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/30.jpg)
30
RPD-2002 Correlation Results[Sallam, Dai, & Faeth 2002]
• Total droplet mass ejection rate 1300 kg/s Assumes G(x = 1 m) over entire surface
area of each respective jet (Mean valueof predictions)
~3% of total jet mass flow rate
• Sauter mean dia. 5.7 mm for all jets at x = 1 m SMD at xi 0.82 – 1.0 mm for d = 4.61 –
15.6 cm, respectively
![Page 31: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/31.jpg)
33
Beam Propagation Implications
• Model predictions imply protection concept is incompatible with beam propagation requirements
• However, model is based on : Fully developed turbulent pipe flow at exit No flow conditioning, nozzle or BL cutting
• Can nozzles / jets be designed to reduce these number densities to a level compatible with beam propagation requirements?
![Page 32: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/32.jpg)
34
Boundary Layer Cutter
• “Cut” (remove BL fluid) on one side of liquid sheet
• Independently control: Cut depth, zcut
Downstream location of cut, x
• Removed liquid (~0.18 kg/s) diverted to side
![Page 33: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/33.jpg)
35
Cutter Details
• Aluminum blade inserted into flow Remove high vorticity / low
momentum fluid near nozzle wall
Blade face tilted 0.4° from vertical
Blade width (y-extent) 12 cm
• Relatively short reattachment length Nozzle contraction length 63
mm
Nozzle
Diverted (cut) fluid
zcut
Cutter blade
7.5
mm
![Page 34: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/34.jpg)
36
Mass Collection Procedure
• Cuvette opening = 1 cm 1 cm w/0.9 mm wall thickness
• Five adjacent cuvettes Cuvette #3 centered at y = 0
• Located at x, zs away from nominal jet position zs 2.5–15 mm Experiments repeated to determine
uncertainty in data
• Mass collected over 0.5–1 hr
zs
x6.5
Cuvettes
yz
54321
![Page 35: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/35.jpg)
37
Experimental Number Density(x / = 25)
0.0E+00
5.0E+20
1.0E+21
1.5E+21
2.0E+21
0 5 10 15 20
Eq
uiv
alen
t av
erag
e n
um
ber
den
sity
,N
(#
/ m3 )
Cuvette standoff distance, zs (mm)
Standard DesignNo Fine Mesh
Closed – No cuttingOpen – 0.25 mm cut
![Page 36: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/36.jpg)
38
Summary: Mass Collection
• Flow straightening and contracting nozzle significantly reduce ejected droplet mass (by 3–5 orders of magnitude) compared w/model
• BL cutting has considerable impact on collected droplet mass
• BUT: proper flow conditioning more important
• Flow conditioning and BL cutting reduce collected droplet mass by orders of magnitude (compared with model predictions)
![Page 37: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/37.jpg)
39
Conclusions
• Hydrodynamic source term sensitive to initial conditions
• Jet geometry, surface ripple and breakup affected by flow conditioning
• Flow conditioning / converging nozzle reduces droplet mass flux (and number density) by 3–5 orders of magnitude over model predictions
• BL cutting appears to eliminate droplet ejection for a “well-conditioned” jet
• Preventing blockage of fine mesh screens major issue
![Page 38: Hydrodynamics of Liquid Protection schemes for IFE Reactor Chambers S. I. Abdel-Khalik and M. Yoda IAEA Meeting - Vienna (November 2003) G. W. Woodruff.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649dc05503460f94ab476a/html5/thumbnails/38.jpg)
40
Acknowledgements
Georgia Tech• Academic Faculty : Damir Juric and Minami Yoda
• Research Faculty : D. Sadowski and S. Shin
• Students : F. Abdelall, J. Anderson, J. Collins, S. Durbin, L. Elwell, T. Koehler, J. Reperant and B. Shellabarger
DOE• W. Dove, G. Nardella, A. Opdenaker
ARIES-IFE Team
LLNL/ICREST• W. Meier, R. Moir