Hydraulic & Electromechanical Grizzly Dakota Easy · 2018-02-23 · mODULAR ROAD CABINET Control...
Transcript of Hydraulic & Electromechanical Grizzly Dakota Easy · 2018-02-23 · mODULAR ROAD CABINET Control...
BollardsHydraulic & Electromechanical CDS
BOLLARD’S CONTROL UNIT
GrizzlyHyDRAULIC BOLLARDS
DefenderELECTROmECHANICAL BOLLARDS
DakotaELECTROmECHANICAL BOLLARDS
EasyELECTROmECHANICAL BOLLARDS
TotemmODULAR ROAD CABINET
Control unit for electromechanical and hydraulic bollards able to simultaneously manage up to 4 bollards. Integrated heating circuits and two-channel radio receiver, 2048 codes. Supplied with IP-54 box.
230Vac hydraulic bollard for very intensive use. Its size and technical characteristics make it particularly. The SCT (strong) version keeps specific the shaft in the event of a power failure, up to protect sensitive places (ministries, barracks, airports, access to buildings of particular importance, etc.). The standard version, on the other hand, is STD suitable for public installations where the shaft must lower spontaneously, freeing the passage in the event of a power failure. Designed and built with the aim of simplifying not only installation, but also maintenance thanks to the hydraulic pump located just under the flange.
230Vac electromechanical bollard for intensive use, with internal actuator in oil bath, complete with luminous cap with radial LED lights. Its size and technical characteristics make it particularly suitable for installations to protect public and industrial business concerns (companies, car dealerships, shops of particular importance, credit institutions, etc.). Cataphoresis treatment of all the metal parts, special exterior polyester powder coating. The control unit with integrated heating circuit makes the bollard suitable for operation in all weather conditions.
230Vac electromechanical bollard for intensive use, with internal actuator in oil bath, complete with luminous cap with LED lights and integrated buzzer. Its size, technical specifications and careful design make it particularly suitable for public and industrial business areas (large companies, squares, public places, private buildings, etc.). Cataphoresis treatment of all the metal parts, special exterior polyester powder coating. The control unit with integrated heating circuit make the bollard suitable for operation in all weather conditions. Independent foundation box.
230Vac electromechanical bollards for collective use, equipped with internal actuator in permanent grease. Designed and built with the aim of obtaining entry level product but without forgoing the quality and production philosophy featured in all O&O products. Particularly suitable for installations in private contexts (parking space saver, access to private homes, garages, etc.) in the smaller version EASy Ø115-500, and in collective contexts (condominiums, hotels, private business area, etc.) in the larger diametre EASy-Ø200-700 (cap with LED lights).
modular road cabinet polyester powder coated and with cataphoresis treated steel. Upper module equipped with aluminium panel accessorisable with access control systems (badge readers, numeric coders, intercom, etc.) and also with traffic lights with 2 or 3 Red/Green LED lights and 360° on cap. The lower module, also available individually, is designed to hold up to 2 control units for bollards and be accessorisable with 360° LED traffic light. Particularly suitable in public as well as private contexts.
Dakota A B C D E F Ø220_500_CDF 220 500 180 1165 360 295 Ø220_700_CDF 220 700 180 1165 360 295
Hydraulic Grizzly Supply voltage 230 Vac ± 10% 50Hz Control unit CDS Impact resistance (Joule) 20.000 Breaking resistance (Joule) 400.000 (thick. 6 mm) 800.000 (thick. 10 mm) Frequency of use (manoeuvres/day) 3.000 Manoeuvre time (seconds) 6s Operating temperature -40°C*+60°C Protection rating IP67
Electromechanical Defender Supply voltage 230 Vac ± 10% 50Hz Control unit CDS Impact resistance (Joule) 20.000 Breaking resistance (Joule) 400.000 Frequency of use (manoeuvres/day) 1.500 Manoeuvre time (seconds) 9s Operating temperature -40°C* +60°C End of travel slowdown yes Protection rating IP67 Electric brake locking yes
Electromechanical Dakota Supply voltage 230 Vac ± 10% 50Hz Control unit CDS Impact resistance (Joule) 15.000 Breaking resistance (Joule) 150.000 Frequency of use (manoeuvres/day) 1.500 Manoeuvre time (seconds) 6s (h=500) - 9s (h=700) Operating temperature -40°C* +60°C End of travel slowdown yes Protection rating IP67 Electric brake locking yes
Electromechanical Easy Supply voltage 230 Vac ± 10% 50Hz Control unit CDS Impact resistance (Joule) 7.000 (Ø115) - 10.000 (Ø200) Breaking resistance (Joule) 60.000 (Ø115) - 110.000 (Ø200) Frequency of use (manoeuvres/day) 500 Manoeuvre time (seconds) 6s (h=500) - 9s (h=700) Operating temperature -40°C* +60°C End of travel slowdown yes Protection rating IP67 Electric brake locking yes
Technical data
Hydraulic _Grizzly
Electromechanical _Defender_Dakota_Easy_Totem
ØA
B
C
D
ØE ØF
Grizzly A B C D E F Ø275_600_CDF 275 600 270 860 480 354 Ø275_800_CDF 275 800 270 1060 480 354
Defender A B C D E F Ø275_700 275 700 212 1260 400 355
Easy A B C D E F Ø115_500 115 500 75 965 300 190 Ø200_700 200 700 75 1180 360 273
*With Thermon active *With Thermon active *With Thermon active *With Thermon active
O&O s.r.l.
Via Europa, 242015 Correggio (RE), Italiatel. +39 0522 740111 fax +39 0522 631290 e-mail: [email protected] web: www.oeo.it
BOLLARD ANTI-DEBRIS SYSTEMThanks to the conical design of the shaft cap and the special flange gasket in EPDm (special compound with high resistance to heat, ozone and atmospheric agents) the penetration of debris inside the bollard is reduced by 80%.
OPENING AND CLOSING SLOWDOWNmechanical slowdown in opening and closing
AESTHETIC COORDINATIONDesigned so that it can be combined with bollards using different technology, without any noticeable aesthetic difference once installed.
MAXIMUM VISIBILITYShaft cap with high intensity axial and radial LED lights with approved retro-reflective adhesive film, ensuring maximum visibility during the day and night. Buzzer integrated in the lights cap.
HEATER CIRCUITHeating circuit directly integrated in the control unit, ensuring perfect operation of electromechanical and hydraulic bol-lards with temperatures as low as -40°C. Programmable operation logic (minimum temperature adjustment).
ACCELERATED PRODUCT TESTSReliability of the declared technical pa-rameters (manoeuvres per day. Average service life.
Product benefits
1_2014
Automatic Bollardselectromechanical & hydraulic
Hydraulic
_Grizzly
Electromechanical
_Defender_Dakota_Easy_Totem
control unit with receiver and inte-grated heating circuit (to -40°). For all
bollard models.
Standard metal mass magnetic loop detector.
Anti-tamping kit for “Dakota” electromechanical bollards. To be
requested when ordering.
Anti-tamping kit for “Grizzly” hydrau-lic bollards. To be requested when
ordering.
Anti-tamping kit for “Defender” electromechanical bollards. To be
requested when ordering.
TOTEm upper module with accesso-risable aluminium panel
TOTEm lower module for holding up to 2 control units
TOTEm complete and inclusive of 360° LED lights and installation
template.
Emergency power unit for electro-mechanical bollards.
Control unit with emergency pushbutton.
Siren acoustic detector for bollard automatic movement
Customised painting according to RAL table. For lots of more than 5
bollards.
Voltage converter 110-120/230V AC 1 transformer for max. 2 bollards.
Programmable timer for automatic movement of bollards.
Certified traffic lights with 2 LED lights. Ø 100 mm complete with
connections.
Certified traffic lights with 3 LED lights. Ø 100 mm complete with
connections.
2-channel metal mass detector supplied with base.
Professional metal mass magnetic loop detector.
394
062
3032
86
3502
30
3036
9239
431
039
430
039
433
030
3280
3942
2039
4200
3039
02
3804
0039
4210
3852
5138
5256
394
056
394
060
3817
80
CD
SSP
IRA
-STD
AN
TIF
DK
NA
NTI
F G
RZ
AN
TIF
DEF
TOTE
m
SU
PTO
TEm
IN
FFU
LL
TOTE
mB
ATT
-US
CE
mS
OS
CO
LOR
P
LUS
CV
T 11
0-12
0/23
0TI
mE
RS
Em
-2L
R-V
LE
DS
Em
-3L
R-
R-V
LE
Dm
AK-
2SP
IRA
-PR
O
_Gri
zzly
_Def
ende
r_D
akot
a_E
asy
Ø 11
5_E
asy
Ø 2
00
_Gri
zzly
_Def
ende
r_D
akot
a_E
asy
Ø 11
5_E
asy
Ø 2
00
CO
DE
MO
DE
L
CO
DE
MO
DE
L
DESCrIPTIOn DESCrIPTIOn
• • • • •
• • • • •
• • • • •
• • • • •
• • • • •
• • • • •• • • • •
• • • • •
• • • • •
• • • • •
• • • • •
• • • • •
• • • • •
• • • • •
• • • • •
• • • • •
• • • • •
• • • • •
Optional accessoriesElectromechanical hydraulic bollards
• • • •
Cod
. 0
35
50
7-0
3
The
con
tent
s of
thi
s ca
talo
gue
(imag
es,
tech
nica
l des
crip
tion
s, il
lust
ration
s) a
re t
he e
xclu
sive
pro
pert
y of
O&
O S
rl.
Rep
rodu
ctio
n in
any
for
m a
nd o
n an
y m
ediu
m is
for
bidd
en.
Cop
yrig
ht 2
014
. A
ll rig
hts
rese
rved
.The
dat
a in
thi
s pu
blic
atio
n ar
e to
be
cons
ider
ed a
s in
dica
tive
. O
&O
res
erve
s th
e rig
ht t
o m
ake
any
chan
ges
witho
ut p
rior
notice
.