Hydrant and Hose Equipment Cabinet 01-2012
3
Phone: +47 994 800 10 Fax: +47 994 800 11 www.inmaco.com INMACO Ltd. United Kingdom Phone : +44 1344 488827 E-mail : [email protected] INMACO PTY LTD. Australia Phone: +61(0)8 92562246 E-mail: [email protected] INMACO AS | Sagmyra 27 4623 Kristiansand, Norway E-mail: [email protected] REGULATIONS:CAP 437 Hydrant and Hose/Equipment Cabinet HOSE CABINET Adjacent to the Hydrant, a Hose Cabinet shall be provided. The cabinet shall be constructed from GRE and contain the following equipment: 2 of 15m x 38mm lay flat fire hose completed with couplings. 1 of Multipurpose fire hose nozzle 1 set Hydrant spanner (if required by type of coupling) The cabinet will be supplied with ventilation and drain hole in bottom of cabinet, and a single door witch latch in fully open position for easy access to equipment during an emergency. LAY FLAT FIRE HOSES The hoses are non-percolating with heavy duty, circular woven, double jacket, and spun polyester construction. The hoses are lightweight, flexible and kink resistance with a minimum burst pressure of 4500kPa. The hose have a fully encapsulated jacket fibre coating that are resistant to oils, diesel fuel, chemicals and seawater. Each hose are equipped with male and female 65mm/gunmetal couplings. The hose and couplings are designed for offshore use and compatible with seawater/AFFF.
Transcript of Hydrant and Hose Equipment Cabinet 01-2012
8/13/2019 Hydrant and Hose Equipment Cabinet 01-2012
http://slidepdf.com/reader/full/hydrant-and-hose-equipment-cabinet-01-2012 1/2
8/13/2019 Hydrant and Hose Equipment Cabinet 01-2012
http://slidepdf.com/reader/full/hydrant-and-hose-equipment-cabinet-01-2012 2/2
