CANOPY / PARKING GARAGE

4760 SERIEST5 LINEAR FLUORESCENT

The Hydrel 4760 Series T5 Linear Fluorescent Canopy & Parking Garage Luminaire

1

Hydrel’s architecturally styled canopy and parking garage luminaires combine rugged construction and superior performance to create a linear lighting solution suitable for all outdoor climates and applications.

The PolarPack™ cold weather option is an active temperature management system maintaining optimal operating conditions even in the harshest of winters. With the patent pending PolarPack™ cold weather option, near full light output is now a reality to 0°F (-18°C).

Hydrel’s 4760 Series Canopy and Garage lighting fi xtures combine T5 lamp technology with high performance optics. The T5 fl uorescent lamp off ers approximately 100 lumens/watt, 25,000 hour lamp life, instant on capability, and a color rendering index greater than 80. The high output quadrilaterally symmetrical distributions and the simple design lines make the 4760 Series fi xtures ideal for spreading soft, even illumination under canopies, over walkways or within parking garages. These perfor-mance features combined with the fi xture’s low profi le and simple styling provide an unequalled blend of design and performance.

Architecturally Styled | Rugged Construction | Superior Performance

FeaturesFixture construction: Copper free extruded/ die cast/sheet aluminum with extruded SuperTuf™ acrylic lensing. Fully gasketed to meet IP65 and U.L. wet location requirements.

Designed for single or continuous row applications.

Architecturally styled, low profi le housing.

Precision optics designed to maximize lighting performance and minimize glare. Surface and Pendant mounting.

Emergency/battery back-up option.PolarPack™ cold weather technology ensures reliable, high output at low ambient temperatures.

Utilizes T5 or T5HO high effi ciency lamps.

In the early 1960s Hydrel set out to make the most reliable underwater lighting fi xtures the world has ever seen. This was no small task, but we accomplished it. Since then, we have moved up onto land, and continued to build all Hydrel outdoor lighting products the same way: Rugged, Impenetrable, Uncommonly Reliable, and Performance Oriented.

Continuing our pursuit of providing performance luminaires for all lighting applications is not just our goal, it is our passion! In the pursuit of our passion, Hydrel has successfully integrated the effi cient T5/T5HO fl uorescent lamp technology with a performance outdoor all-weather luminaire, the 4760 T5 Canopy Light. The 4760 provides the perfect blend of design and performance that has made Hydrel unique in outdoor lighting.

Outdoor T5 Technology

2

ADA Compliant

Wall mount applications maintain UL Wet Location listing when specifi ying Ceiling Mount Option.

POLARPACK™ TECHNOLOGYHydrel’s patent pending PolarPack™ Technology resolves the temperature sensitive issues of using T5 and T5HO lamps in the outdoor environment. This breakthrough allows for advancements in outdoor landscape, building, garage and parking lighting.

ACTIVE THERMAL CONTROLPolarPack™ Technology senses and regulates the thermal environment in which the lamp operates, optimizing its performance in lower than normal temperatures.

MAXIMUM USE OF POWER/LIGHT OUTPUTPolarPack™ Technology takes advantage of the T5 & T5HO light output effi ciency to deliv-er high light output for the minimum amount of power consumption critical in today’s demanding energy environment.

Design

CONSTRUCTIONHousing - Constructed from extruded alumi-num sides with aluminum sheet backing and die cast aluminum end caps assembled into a unitized body. The housing is fully gasketed and sealed against moisture.

Lens - Impact resistant extruded SuperTuf™ acrylic, fresnelled for a uniform distribution, sealed to the housing with silicon gasketing.

Optics - Patent Pending optics. Precision formed combination white enameled steel and Miro4™ specular aluminum for maximum refl ectivity. The refl ector serves as the mount-ing plate for the socket and ballast, allowing for complete assembly of electrical compo-nents outside the housing.

Wiring End Plates - Allow access for through branch wiring in continuous run confi gurations.

Continuous Run Capable End Caps - Fixture end caps will allow for end-to-end mounting using three ¼-20 fasteners.

PolarPack™

3

The 4760 luminaire utilizes an additional in-termittent 15 watts per unit for temperatures below 40º F (4º C) when using PolarPack™ Technology.

100%

90%

80%

70%

60%

50%

40%

30%

20%

10%

0°F 10°F 20°F 30°F 40°F 50°F 60°F 70°F 80°F 90°F 100°F 110°F

ABOVE GRAPH SHOWS A LUMEN OUTPUT COMPARISON OF THE 4760 WITH AND WITHOUT THE POLARPACK OPTION RELATIVE TO OUTDOOR AMBIENT TEMPERATURE.

4760 STANDARD

4760 W/POLARPACK™

AMBIENT OUTDOOR TEMPERATURE

PE

RC

EN

T O

F R

AT

ED

LU

ME

NS

The term “Volumetric Lighting” simply refers to lighting that is less directional and more uniform through-out the entire volume of a space. Volumetric lighting extends beyond the work plane to adequately illuminate the entirety of the space, resulting in a better balance of luminance through the visual fi eld. The space feels brighter, larger, more public, and more relaxing. Facial rendering is more natural, consistent, and complimentary. Shadows tend to be softer and less pronounced, and the appearance of the space is less defi ned by sharp, arbitrary transitions in surface brightness. Volumetric lighting does a better job of rendering architecture, its contents, and its occupants true to form.

The attributes of volumetric lighting are well understood and appreciated, as evidence by the popularity of indirect and direct/indirect suspended lighting.

The need exists for a highly effi cient surface or pendant mounted luminaire capable of providing quality volumetric exterior lighting. However, volumetric lighting is dependent upon high angle illumination, and this becomes a challenge in terms of glare management. Specular optics directly image the extreme bright-ness of the lamp. The solution lies in recognizing that luminous intensity is the product of luminance and area. For a given intensity value, the brightness of the luminaire can be reduced if the area from which that brightness emanates can be increased in size. This is another way of saying that the solution is to create a luminaire whose brightness Is distributed relatively uniformly over the entire luminaire aperture, and this implies that diff using optics, rather than specular, must be employed.

DIRECTIONAL LIGHTING VOLUMETRIC LIGHTING

Volumetric Canopy Lighting

4

Lumen Dirt Depreciation: Hose-down capabilities are often a requirement for open air structures. The 4760’s IP65 rating makes that a reality for any outdoor application.

Light Loss Factor: T5 technology maintains at least 90% of initial lumen output throughout the life of the lamp.

Rated Lamp Life: Lamp replacement costs are critical when evaluating the fi nancial impact of an overall lighting system. The T5 / T5HO lamp is rated for 25,000 hours for three hour starts and 35,000 hours for twelve hour starts, compared to the 15,000 hour lamp life a 150 watt ED-17 Metal Halide lamp provides. 24 hour operation realizes roughly an additional year of lamp life for the T5 source.

Major Electrical Components: The refl ector serves as a mounting plate for the socket and ballast, allowing for a single person to perform major electrical component replacements in a matter of minutes, avoiding costly lane closures and labor hours when specifying in high traffi c parking structures.

Multiple Lamps: The 4760’s two-lamp system affords each luminaire a unique ability to contribute to the overall lighting system upon failure of a single lamp, ensuring no space falls into complete darkness prior to identifying service needs.

4760 MAINTENANCE

SYSTEM 100M 150M 175M 100M 150M 175M 100M 150M 175M 100M 150M 175M HOURS 12 hrs $5.26 $17.08 $24.44 $7.01 $22.78 $32.59 $8.76 $28.47 $40.73 $10.51 $34.16 $48.88 OPERATED 18 hrs $7.88 $25.62 $36.66 $10.51 $34.16 $48.88 $13.14 $42.71 $61.10 $15.77 $51.25 $73.32 PER DAY 24 hrs $10.51 $34.16 $48.88 $14.02 $45.55 $65.17 $17.52 $56.94 $81.47 $21.02 $68.33 $97.76

SINGLE ROW SYSTEM - 4760 MAINTAINED ILLUMINATION Bay Width Mounting Height Spacing A B C D E F Avg. FC Avg./Min Max/Min

55’ 8’ 20’ 9.4 3.3 3.3 4.4 1.4 1.3 3.6 3.3 8.6 9’ 20’ 7.8 3.6 3.4 4.3 1.5 1.4 3.5 2.9 6.6

60’ 8’ 20’ 9.4 3.3 2.8 3.4 1.0 1.0 3.5 3.5 9.4 9’ 20’ 7.9 3.5 2.9 3.4 1.0 1.0 3.0 3.3 8.9

DOUBLE ROW SYSTEM - 4760 MAINTAINED ILLUMINATIONBay Width Mounting Height Spacing Length A B C D E F Avg. FC Avg./Min Max/Min

55’ 8’ 20’ 22’ 10.6 4.6 6.4 7.9 3.7 4.5 6.6 1.8 2.9 8’ 30’ 22’ 9.8 1.9 2.9 7.1 1.8 3.9 5.3 2.9 5.6 55’ 9’ 20’ 22’ 9.2 4.9 6.5 7.9 3.8 4.5 6.3 1.7 2.5 9’ 30’ 22’ 8.3 2.2 3.2 6.9 2.0 3.9 4.9 2.5 4.3

60’ 8’ 20’ 24’ 10.2 4.3 5.7 6.8 3.2 3.8 6.0 1.9 3.3 8’ 30’ 24’ 9.7 1.8 2.8 6.1 1.8 3.3 4.9 2.9 5.8 60’ 9’ 20’ 24’ 8.8 4.6 5.9 6.9 3.4 3.8 5.7 1.7 2.7 9’ 30’ 24’ 8.2 2.0 3.0 6.0 1.8 3.3 4.6 2.5 4.6

Parking Garage Lighting

DOUBLE ROW

F E F

F E F

A B A

A B A

D C D

Bay

Wid

th

SPACING

LENGTH

SINGLE ROW

F E F

D C D

A B A

D C D

F E F

Bay

Wid

th

SPACING

Mounting Height

4”(102)

COST PER KWH $0.06 $0.08 $0.10 $0.12

ENERGY SAVINGS PER FIXTURE WHEN SPECIFYING 4760 IN PLACE OF HID METAL HALIDE LUMINAIRES

* To determine the total savings for a particular installation, take the corres- ponding savings over the HID fi xture and multiply by the number of fi xtures.* To determine the savings of a the 28WT5 source multiply savings by 2.

Example: Replacing quantity 300 150M HID fi xtures @ $0.10 per kWh and @ 18 hours operation per day, the total savings will be $42.71 per fi xture or $12,813 per year for the entire system.

Formula: (Watts saved X kWh x hours burned per year) / 10005

LAMP TYPE INPUT WATTS 100M 140 150M 185 175M 213 28WT5 60 54WT5HO 120

HID

FLUORESCENT

DESIGN PARAMETERS:Open air structure, presumes fl at ceilingRefl ectivity: 40% Ceiling / 30% Floor Total LLF = 0.81Actual Results May Vary

6

MOUNTING DETAIL

ANCHOR BOLTS (BY OTHERS)

CEILING GASKET

KNOCK OUT PLUG

CEILING MOUNT

FIXTURE HOUSINGELECTRICAL SERVICE (BY OTHERS)

FASTENERS

REFLECTOR/BALLASTASSEMBLY

WIRING HARNESSW/QUICK DISCONNECT

LENS

LAMP

HOUSINGWIRING HARNESS

FASTENERS

REFLECTOR/BALLASTASSEMBLY

LAMP

FIXTURE HOUSINGELECTRICAL SERVICE (BY OTHERS)

ANCHOR BOLTS (BY OTHERS)

HOUSINGWIRING HARNESS

PENDANT MOUNT

WIRING HARNESSW/QUICK DISCONNECT

LENS

7

DIMENSIONS

FSS - FLUSH SOURCE SHIELD

CEILING MOUNT

PENDANT MOUNT

X

4”(102)

49 1/2”(1257)

49 1/2”(1257)

8”(203)

4”(102)

CONTINUOUS RUN END TO END MOUNT

49 1/2”(1257)

49 1/2”(1257)

ACCESSORIES

HS - HOUSE SIDE SHIELD

WET LOCATION

Ø4 1/2” B.C.D.

3 13/16”

DAMP LOCATION

Ø4 1/2” B.C.D.

1/2”

5 1/2”(140)

1”(25)

(4) Four1/4” Hole

1 9/16”(40)

4 15/16”(125)

8

DISTRIBUTION & PERFORMANCE

THREE DISTINCT HIGH PERFORMANCE OPTICS: CANOPY | VOLUMETRIC CANOPY | GARAGE

9

Hydrel is an ISO 9001 Certifi ed Manufacturer

Notes:1 12” standard length if not specifi ed.2 Options required for installations located in areas subject to seismic activity.3 Available only for 230-250 Volt 50Hz applications.

Model *4760

Lamp Type *2/28T5 Two (2) T5, Miniature Bi-Pin 2/54T5HO Two (2) T5, High Output, Miniature Bi-pin

Voltage *MVOLT347

Distribution *CNP CanopyGRG GarageVCNP Volumetric Canopy

ExternalHS House Side ShieldFSS Flush Source Shield

Accessories

TPH Tamper Proof HardwareELN Emergency Battery Back-upGEB95S 0.95 Ballast for Step DimmingPLPKX PolarPack™ Cold Weather Start Option 120 VoltPLPKY PolarPack™ Cold Weather Start Option 347 VoltPLPKZ PolarPack™ Cold Weather Start Option 208 - 277 VEQSM2 Earthquake Seismic Mount

Options

LPI Lamp Included 3000K LampLP35K 3500K Lamp IncludedLP41K 4100K Lamp Included

Lamp *

DWH Gloss White (standard)BL BlackBZ BronzeWH WhiteDDB DarkBronzeDNA Natural AluminumGR GraySND SandSTG Steel GrayCF Custom Finish

Finish *

4760 2/54T5HO MVOLT GRG CM LPI DWH

IEC3 International Electrotechnical Commission

Listing

Mounting *CM Ceiling MountCMDE Surface Mount ConduitPDMD__1 Pendant Mount, Damp Location Specify length 6”- 48” in 6 inch incrementsPDMW__1 Pendant Mount, Wet Location Specify length 6”- 48” in 6 inch increments

MATERIAL: Extruded 6063-T4 aluminum with die cast A360 aluminum end caps. All fasteners are stainless steel.

LAMP:Fluorescent, two (2) T5 & T5HO to 54 Watt per lamp Max. SOCKET: G5 Miniature Bi-Pin.

VOLTAGE: Multi-Volt (120V – 277V 50/60 Hz).

DISTRIBUTIONS: CNP - CanopyGRG - GarageVCNP - Volumetric Canopy

SPECIFICATIONS

LENS: Curved high strength optical grade clear acrylic.

MOUNTING: Ceiling Mounted over recessed box, conduit stub-out or Pendant Mounted Two (2) 1/2” NPT end knockouts.

OPTIONS: Tamper-proof hardware PolarPack™ cold weather option, various pendant lengths.

BALLAST: Integral Electronic multi-volt, thermally protected, resetting, class P, HPF, A+ sound-rated, -20°F (-29°C) minimum starting temperature.

FINISH: See ordering guide for color options.

ACCESSORIES: House-Side Shield, Fixed Source Shield, Emergency Battery Back-up, Step Dimming Ballast.

LISTING: IP65 / UL Wet Location / UL Damp Location, CSA

WEIGHT: 27 lbs.

ORDERING GUIDEEXAMPLE:* Indicates required selection.

For Continuous Run applications refer to Specifi cation Sheets at www.hydrel.com

12881 Bradley Avenue, Sylmar, CA 91342T 818.362.9465 F 818.362.6548Email: custserv@hydrel.comwww.hydrel.com

Form

No.

106

.29

4/07

©2007 Acuity Brands, Inc. All rights reserved. “Hydrel” is a trademark of Acuity Brands, Inc. Printed on Recycled Paper