Hybrid Motorcycle Global Marketing
Transcript of Hybrid Motorcycle Global Marketing
CAU Hybrid Motorcycle Global Marketing 2009
Commercial in Confident 1
CAU's Hybrid Electric Motorcycle Global Marketing Concept
CAU's hybrid electric motorcycle concept is to find a means of sustainable individual transport without decreasing quality of life for anybody in the world and without putting the burden of high investments on future generations. The new concept called Peace-of-Mind is based on existing technology and promises:
Noticeable contribution to lower CO2 emissions and less energy consumption.
Improvements for environment air quality in urban areas.
Huge improvements in other environmental impacts like noise or emissions.
Fuel and energy supply within the existing infrastructure in the world.
Fuel-flexibility - that means the drivetrain can easily be adapted to other fuels without a complete new design.
Ease of technology changes and improvements - that means new technologies (fuel cell or hydrogen) can be implemented without major redesign work in the future.
Near-term market introduction through mainly exacting sale network.
Affordability and desirability either developed or developing countries.
China auto parts suppliers are more accessible to global buyers, purchasers of quantity and quality. The comprehensive services and marketing promotional campaigns of CAU will integrated all the hybrid motorcycle components (including 2 /3 /4 wheels) into the global supply chain in a more efficient way.
Due to the financial turmoil situation, most of automobile manufacturers have been consolidating and trying to build low-cost supply chains spanning the globe, and the automotive manufacturers now have smaller production numbers in a greater number of plants around the world. In today’s globalizing economy, scattered automobile production facilities means that outsourcing makes more sense. The new market trend will provide the great opportunity for the CAU.
For CAU to keep growing, it must increase products sales. Industrialized nations have, in many hybrid automobile components products and relative service categories, saturated the domestic China markets and have turned to other countries for new marketing opportunities. CAU have found profitability by exporting hybrid motorcycle components products that may be a bit expensive for China locals but are considered inexpensive in wealthier countries.
CAU Hybrid Motorcycle Global Marketing 2009
Commercial in Confident 2
Energy and CO2 Considerations
Energy consumption and CO2 emissions of road transport are the main issues amongst all impacts. The motorcycle run on fuel that is refined from oil. Oil reserves will run short within the near future, experts are just arguing about the time. CO2 emissions threaten the world with climate-change. They are almost proportional to the amount of energy consumed if the source is fossil fuel. The Kyoto agreement requires a 12.5 % reduction in greenhouse gases (mainly CO2) by 2012. A reduction of 60 % is required by 2050.
But so far, energy consumption is strongly related to quality of life and it is still steadily increasing. This indicates that these goals are essential and challenging if quality of life is not going to be decreased. This thesis focuses on individual transport in vehicles. Road transportation is responsible for 22 % and more of most countries in the world greenhouse gas emissions – the third biggest.
Despite all the effort the growth still outpaces the improvements and no contribution has been made to the Kyoto agreement so far. The question is whether more radical solutions like the introduction of low-impact vehicle are required. Plug-in hybrid technology is only one available solution for this issue.
Worldwide Competition
One of the product categories in which global competition has been easy to track is in U.S. automotive sales. Three decades ago, there were only the big three: General Motors, Ford, and Chrysler. Now, Toyota, Honda, and Volkswagen are among the most popular manufacturers. Companies are on a global playing field whether they had planned to be global marketers or not.
The automotive makers themselves are exacerbating competition among auto parts producers by creating new players in the industry. Both Ford and GM have spun off their component divisions, Visteon and Delphi Automotive Systems, respectively.
The recent years, many small locally-owned Chinese and Indian companies can emerge as Tier 2 or Tier 3 companies if they meet the demands of a global economy, stable manufacturing processes and technology, strong research and development skills, low rates of defective parts-per-million, ownership of technology and synergistic relationships with multinational corporations. The companies that are successful at this level could become suppliers to multinationals or Tier 1 companies.
The new auto parts industry business model has been changed to: Tier 1 companies are the main suppliers and assemblers for car manufacturers with which they develop direct, long-term relationships. Tier 2 and 3 companies generally sell to Tier 1 suppliers.
CAU Hybrid Motorcycle Global Marketing 2009
Commercial in Confident 3
Tools to be implemented in CAU's production
There are a few possible tools to improve the productivity and reduce or eliminate waste in CAU's production line:
Project orientated Work Breakdown Structure (PWBS)
Improved Facilities Layout
Materials Requirements Planning (MRP)
Economic Order Quantity (EOQ)
Total Quality Management (TQM)
New Management Approach
Expected Outcome in CAU's Production Line
The expected outcome should these tools/techniques be implemented are the following:
The production line flow will be balanced, timely, continuous and uniform.
The facility layout will ease the transportation and movement of the interim products, and pull them towards the final assembly.
The inventory levels will be kept to a minimum and the items that are ordered per project will arrive on time – eliminating the probability that production will have to wait for the parts to arrive.
Defects will be reduced and possibly eliminated due to the fact that each process that does in fact produce defects will be investigated and altered.
Hybrid Motorcycle Product Development in different phases
The hybrid motorcycle product life cycle means every product has a capability such that it can be used for a certain period of time. The products have life cycles by which they are monitored and evaluated. The first stage in the product life cycle is product making or development. The product is in development when the companies are making specific products which they invest their money in and get nothing from these products at this stage.
Secondly the product is introduced in the market. This is second stage. At this stage, the advertising campaign is run on television to tell people about this product. The product suffers with the competition in the market. In this stage the price is low because the product is in the launching stage. The extract expenditure is being put on the promotions to boost sales. The next stage is the growth stage. In this stage the sales of the product are on a peak and the product has captured a large geographical area. The product has deeply penetrated into the
CAU Hybrid Motorcycle Global Marketing 2009
Commercial in Confident 4
market at this stage. The product has great distribution in the market and is available in every shop of the market.
Stage Product Launch
Emission compliance Hybrid Components Product
Lifecycle
Phase -1 Dec 2009 ~Mar 2010 EU IV
• Hybrid ECU & Sensors • Motor & Controller • Battery charger & BMS
• EU 2011 • Asia 2015 • USA 2012
Phase -2 Aug 2010~Nov 2010 EU V
• Hybrid ECU & Sensors • Motor & Controller • Battery charger & BMS • Fuel Injection System
• EU 2012 • Asia 2020 • USA 2015
Phase -3 Mar 2011~Jun 2011 EU VI +
• Hybrid ECU & Sensors • Motor & Controller • Battery charger & BMS • Fuel Injection System • Ultra vibration Injection Head • Ultra vibration ECU
• EU 2020 + • Asia 2030 + • USA 2025 +
CAU Hybrid Motorcycle Product Development in different phase
The hybrid motorcycle product life cycle goes through many phases, involves many professional disciplines, and requires many skills, tools and processes. Product life cycle (PLC) has to do with the life of a product in the market with respect to business/commercial costs and sales measures; whereas product lifecycle management (PLM) has more to do with managing descriptions and properties of a product through its development and useful life, mainly from a business/engineering point of view. To say that a product has a life cycle is to assert four things:
1. The hybrid motorcycles have a limited life, mainly government regulation,
2. The hybrid motorcycles sales pass through distinct stages, each posing different challenges, opportunities, and problems to the seller,
3. The hybrid motorcycles’ profits rise and fall at different stages of product life cycle, and
4. The hybrid motorcycles require different marketing, financial, manufacturing, purchasing, and human resource strategies in each life cycle stage.
International Marketing
The motorcycle industry worldwide is a huge network across the globe offering companies diversified in culture, organization and technology. However they all have one thing in common, to provide a competitive environment with leading technological solutions induced in their vehicles for ultimate customer satisfaction. Automobiles have become a fragment of our lives.
CAU Hybrid Motorcycle Global Marketing 2009
Commercial in Confident 5
It is indeed captivating to watch the game played by these motorcycle manufacturing giants on the world stage. There is tremendous amount of capital invested in research, development and design. Not every new vehicle makes it to the finish line by pleasing the customers, but again there are legends created without knowledge and renowned only over the passage of time.
A Hybrid vehicle is a vehicle that employs gasoline as a fuel but is also powered electrically. For instance the hybrid vehicle can go up to 40 mph with just electric power. Once the threshold is crossed, the automobile automatically engages power from the internal combustion engine. The vehicle addresses environmental issues far more than other conventional vehicles. Not only does it reduce considerable pollution but also more economical when taking into regard petrol consumption. Although the initial prices are high, it provides a magnificent experience without compromising on any of the positives. This hybrid motorcycle would be a big boon to countries like India, were traffic regulates speed to fluctuate between 30-40 mph. Not only will it reduce substantial pollution but the customers will be more than happy to refuel the hybrid motorcycle less often.
Most of the motorcycle manufactories have commitment to the environment takes a different form. While they strives to offer the most advanced fuel-saving technology available, the companies also believes that drivers should not have to sacrifice any of the style or performance attributes that remain at the top of the reasons for buying a new hybrid vehicles.
For that reason, the CAU’s hybrid components are marked with the same expressive styling as its non-hybrid brethren – inside and out for the entire potential automotive maker.
Competing on a global basis
Companies that are selling in the global industries have no choice but to internationalize their operations. To do this they must make series of decision. Consolidation in the auto supplier market is in large part being driven by the cost-savings of modular assembly. CAU's hybrid modular assembly is defined as “where the main supplier co-ordinates assembly of major systems or parts of the vehicle, leaving the motorcycle, car or truck maker with the simplified task of bolting together the final parts.
CAU's low-cost hybrid components do much of the pre-assembly work in China formerly done by high-wage union workers, as in the United States, for example. Easy-to-install pieces such as entire doors are then fitted into the automobile at the plant.
The move from producing individual parts to assembling modular systems is the latest trend in auto-parts manufacturing. The modular assembly system affords the car maker other advantages besides redefined labour arrangements, such as faster delivery times, more flexibility and choice for the customer, as well as more manageable inventories.
CAU Hybrid Motorcycle Global Marketing 2009
Commercial in Confident 6
Some analysts have interpreted the standards, especially the QS 9000, as a way to push the internationalization and consolidation of the market. The smaller suppliers are having a harder time supplying all the data and completing all the paperwork.
Perhaps their machines are having a more difficult time meeting ever-harder requirements and standards. The auto companies want that. They desperately seek consolidation in their supplier base.
Evaluating hybrid components modular assembly potential markets
The technique typically cuts costs by as much as 20~28 percent in the early stages. Modular assembly means that the supplier must have competency and production capacity in a range of related products. Joint ventures, mergers and acquisitions are generally seen as the fastest ways of achieving this capacity. Thus, the intense competition in the automobile industry has pushed car manufacturers to look for low-cost parts as well as develop the modular system of assembly. The resulting competition among auto parts makers is forcing the consolidation of the auto parts industry.
Some have criticized this new trend of modular production for several reasons. Shifting responsibility for assembly to suppliers reduces the original equipment manufacturers (OEM’s) control over the production processes and quality.
Executives from the major automotive manufacturers such as Ford and General Motors have stated that modular assembly is not a panacea for reducing all the costs, but the system will be established on a case-by-case basis where it makes the most sense.
China's booming auto parts market has provided opportunities for its auto parts sector to flourish. By the end of 2007, there had been 7,579 makers of auto parts and fittings, 72.3% of the entire auto industry in terms of the number of manufacturers. And their revenue from major business was RMB752.9bn, about 35.1% of the entire auto industry while the profit of RMB54.5bn, was 41%. As for ownership, most of them are private companies – 5,137 maker’s altogether, about 67.8% of the total number, but their revenue was only 38.5%. By contrast, although there were only 1,120 foreign-owned carmakers, their revenue was RMB269.3bn, 35.8% of the total of the industry, whiles their profit RMB22.8bn, and was all superior to those of China's homegrown companies.
CAU Hybrid Motorcycle Global Marketing 2009
Commercial in Confident 7
Project Investment of China Listed Auto & Auto Parts Companies 2000-2008
Investment Statistics of China Auto & Auto Parts Industry (by Segment), 2000-2008
As for the layout of the sector in China, currently five major auto-part making regions have come into being in China. They are: Bohai Coastline, Yangtze Delta, Zhujiang Delta, Hubei province,
CAU Hybrid Motorcycle Global Marketing 2009
Commercial in Confident 8
and Mid & Western China. Among them Zhejiang Province has 1,279 auto parts makers, the most in China, and accounts for 16.9% of the auto industry in terms of the number of manufacturers. The top six provinces of China, again in terms of the number of manufacturers, are Zhejiang, Jiangsu, Shandong, Hubei, Shanghai, and Guangdong, which have 58% of China's makers in the auto industry.
And as for demand and supply, China's auto parts sector is able to satisfy 60% of the country's market demand in terms of variety of products, and 70% as for market in general. Here the supplies of labour-intensive and material-intensive products, such as windscreens, tires, fuel tanks, air-cleaners and bearings, are far beyond the market demand, so some of those products are for export, while the supplies of technology-intensive parts, including engines, automatic transmissions, electronic fuel injection systems, airbags, and ABS, are far behind market demand at home, and so the gap is filled mainly with imports.
As China automobile parts industry began walking out of the slow-growth period emerged in the second half of 2004, China auto parts industry has also taken a turn for the better, and the market, stimulated by booming demand, maintains a steady growth. In 2006, the total output value of China auto parts industry reached RMB539.7 billion, up 34.35% year on year, and meanwhile its sales revenue reached RMB527.2 billion, up 34.71% year on year. In 2007, the output value of China auto parts industry reached RMB670 billion and its sales revenue stood at RMB650 billion.
Deciding how to enter the automobile parts market
Once CAU decides to target a particular country, it has to determine the best of entry. Its broad choices are indirect exporting, direct exporting, licensing, joint venture, and direct investment. Each of these succeeding strategy involves strategy involves more commitment, risk, control, and profit potential.
Direct investment
The ultimate form of foreign involvement is direct ownership of foreign based assembly or manufacturing facilities. The foreign company can buy part or full interest in a local company or build its own facilities. If the market appears large enough, foreign production offers distinct advantages.
First, the firm secures cost economies in the form of cheaper labour or raw material and freight saving. Second, the firm strengthens its image in the host country because it creates jobs. Third, the firm develops a deeper relationship with government, customers, local suppliers, and distributors, enabling it to adapt its products better to the local environment. Fourth, the firm retains full control over its investment and therefore can develop its manufacturing and marketing policies that serves its long term international objectives.
CAU Hybrid Motorcycle Global Marketing 2009
Commercial in Confident 9
The main disadvantage of direct investment is that the firm exposes a large investment to risks such as blocked or devalued currencies, worsening markets, or expropriation.
Joint ventures
Foreign investors may join hands with local investors to create a joint venture company which hey share owner ship and control.
A joint venture may be necessary for economic or political reasons. The foreign firm might lack the financial, physical, or managerial resources to undertake the venture alone; or the foreign government might require joint ownership as a condition for entry. Even corporate giants need joint ventures to crack the toughest markets.
Joint venture has certain drawbacks. The partner might disagree over investment, marketing, or other policies. One partner might want to reinvest earnings for growth, and other partner might want to declare more dividends. It can also prevent a multinational company from carrying out specific manufacturing and marketing policies on a worldwide basis.
Licensing
Licensing is a simple way to become involved in international marketing. The licensor licenses a foreign company to use their manufacturing process, trademark, patent, or other items of value for a fee or royalty. The licensor gains entry at little risk; the licensee gains production expertise or a well known product or brand name.
Licensing has potential disadvantages. The licensor has less control over the licensee than it does over its own production and sales facilities. Furthermore, if the licensee is very successful, the firm has given up profits; and if and when contract ended the company may find that it has created a competitor. The best strategy for the licensor is to lead the innovation so that the licensee will continue to depend on licensor.
Finally a company can enter a foreign market through franchising, which is a more complete form of licensing. The franchiser offers a complete brand concept and operating system. In return, the franchisee invests in and pays certain fees to the franchiser.
Direct and Indirect export
The normal way to involved in an international market is through exporting. Occasional exporting is a passive level of involvement in which the company exports from time to time either on its own initiative or in response to unsolicited orders from abroad. Active exporting takes place when the company makes the commitment to expand into a particular market. In either case, the company produces its goods in the home country and might or might not adapt them to international market.
CAU Hybrid Motorcycle Global Marketing 2009
Commercial in Confident 10
Companies typically start with indirect exporting- that is, they work through independent intermediaries. Domestic-based export merchants buy the manufacturer’s products and then sell them to abroad. Domestic-based export agents seek and negotiate foreign purchases and are paid the commission. Cooperative organizations carry on exporting activities on behalf of several producers and are partly under their administrative control. Export management companies agree to manage a company’s export activities for a fee.
Indirect export has two advantages:
It involves less investment. The firm does not have to develop an export department.
It involves less risk. Because international-marketing intermediaries bring know-how and services to the relationship, the seller will normally make fewer mistakes.
CAU can carry on direct exporting in several ways
Domestic-based export department or division Might evolve into a self-contained export department operating as a profit center;
Overseas sales branch or subsidiary The sales branch handles sales and distribution and might handle warehousing and promotion as well;
Traveling export sales representatives Home based sales representatives are sent abroad to find business;
Foreign-based distributors or agents these distributors and agents might be given exclusive rights to represent the company in that country, or only limited rights.
CAU’s Global Web Strategy
According to the latest research report, most of major automotive marketers doing global e-commerce range from automakers to direct-mail companies to running-shoe giants. Marketers like these are using the web to reach new customers outside their home countries, and to build global brand awareness.
CAU will adapt their web sites to provide country specific content and services to their best potential markets, ideally in the local language.
The Internet has become an effective means of everything from gaining free exporting information and guidelines to conducting market research and offering customers several time zones away a secure process for ordering and paying for product. The global marketer may run up against governmental or cultural restriction.
CAU Hybrid Motorcycle Global Marketing 2009
Commercial in Confident 11
Global Adaptation
Global adaptation holds that consumer needs vary and that market programs will be more effective when they are tailored to each target group. This also applies to foreign markets.
CAU should review the following elements and determine which would add more revenue than cost:
Product features
Brand name
Labeling
Packaging
Colors
Advertising execution
Materials
Prices
Sales promotion
Advertising themes
Advertising media
Consumer’s behavior can dramatically differ across markets.
Product Adaptation
The hybrid motorcycle product adaptation involves altering the product to meet the local conditions or preferences, for example, scooter are very common in India and China, but scooter will not suitable south east Asia region as this region has heavy rain and flood water in most of seasons, it will require big wheel motorcycle. There are several levels of adaptation.
CAU can produce a regional version of its hybrid motorcycle product.
CAU can produce a country version of its hybrid motorcycle product.
The company can produce a city version of its hybrid motorcycle product.
CAU can produce different retailer version of its hybrid motorcycle products.
CAU Hybrid Motorcycle Global Marketing 2009
Commercial in Confident 12
Marketing budget and expenditure
Both direct and indirect marketing expenditure should be closely monitored against a fixed budget. Marketing should be given a job number and all staff should record time spent on marketing. Direct marketing costs, such as the production of promotional and presentation material, reprographics, and advertising, etc. will be more obvious than indirect labour expenses which account for a much larger percentage of overall expenditure. A core brochure, for example, may cost a few hundred thousand US$ to produce but the amount of labour hours devoted to researching, planning and developing its contents will greatly exceed this amount. The time spent working on speculative and or feasibility work which the practice does not win, and hours spent by partners on indirect marketing should be recorded against the marketing job number and monitored closely. Without these systems in place, a realistic marketing budget cannot be implemented.
Once CAU has decided which areas of the marketing plan are the highest priority, budgets can be set accordingly. It is important that analysis is undertaken to establish the marketing return rate by dividing the total fee volume by the marketing expenditure to give the plan accountability. By doing this the practice can establish whether they are getting adequate returns for their marketing efforts and, if need be, can reduce or increase different percentages of the marketing budget.
Strategic aims and Objectives of the Marketing Plan
These provide the foundation on which a marketing plan can be based. They need to be reviewed and analysed before operational requirements can be suggested and actioned. The marketing plan must include different analyses to help it progress in the right direction.
Market segmentation
The potential of each of CAU's core sectors: automotive components and industry should be assessed on their growth rate, fee-earning capability, degree of competition and the practice's core capabilities of meeting client needs. Key points to consider are:
Does CAU have the relevant track record and experience which potential clients require?
What is the profit ratio of both the top and the bottom line?
Are the sectors both large and stable enough to give CAU adequate returns for their profits?
Do CAU’s clients in each sector have a high level of similarities?
How easily can the sectors be subdivided, i.e. Assembly factory, parts reseller?
Are the sectors economically stable, growing or shrinking?
CAU Hybrid Motorcycle Global Marketing 2009
Commercial in Confident 13
The marketing plan needs to identify a system of establishing a profile of each of CAU's core sectors and focusing on them. Also it is important to attend industry conferences and seminars. Additionally, the practice can get information from the following sources:
National media, i.e. Financial Times industrial surveys;
the trade, both technical and professional press;
government departments and official publications;
local and national Chambers of Commerce;
professional and trade organizations - yearbooks and directories;
subscription services, to provide periodic sector reports on market intelligence and financial analysis;
CAU Production Forecast (2010~2014)
Predicting the CAU’s production future is a risky proposition often filled with guesstimates and theories based on current events and hoped for consequences. At the same time, CAU and their alliance are busy doing just that in anticipation of future consumer demands, emerging markets, fuel availability, and so much more.
Beside strong demand in EU and northern America, China, South East Asia region and India are the emerging CAU’s hybrid motorcycle markets of today.
For a few years now, hybrids vehicles have been all the rage in the consumer car market. The Toyota’s Prius has been elevated to the status of an icon and CAU is now trying to catch up with the new market trend and CAU will be the unquestioned world leader of hybrid motorcycle in the very near future.
CAU will be adapting the hybrid system it uses on its current cars to work with motorcycles of engine displacement between 50 and 1000cc. CAU hopes to increase fuel efficiency by about 35%~60% with the hybrid motorcycle.
Comme
0
2
4
6
8
10
12
14
16
CAU H
ercial in Con
CA
ECU & Sen
Hybrid M
nfident
AU’s Hybrid M
Hybrid Comp
ECU & Sens
Motor & Con
Battery char
Fuel Injectio
nsors Mo
Motorcy
Motorcycle co
ponents
ors
ntroller
rger & BMS
on System
otor & Contro
ycle Glo
omponents P
2010 2
0.05 0
0.02
0.02
0.001 0
ller Battery
obal Ma
Production Fo
011 2012
0.75 2
0.5 1.5
0.5 1.5
0.01 2
y charger & BMS
arketing
orecast (Millio
2013 20
4
3
3
7
Fuel InjeSyste
g
on set)
014
7
5
5
15
ction m
2009
14
2010
2011
2012
2013
2014
Comme
CAU H
ercial in Con
Hybrid M
nfident
CAU Hyb
2010
5000
0
100000
200000
300000
400000
500000
600000
700000
800000
900000
1000000
Motorcy
rid Motorcyc
2011
120000
Complete HyMotorcycl
ycle Glo
le Production
2012
0 300000
20
brid e
obal Ma
n (Complete U
2013
0 450000
010
2012
arketing
Unit) Forecas
2014
1000000
2
2014
g
st
2009
15
2010
2011
2012
2013
2014
Comme
CAU Hy
1
1
2
25
30
6
7
CAU H
ercial in Con
ybrid Moto
F
0
50
100
150
00
50
00
Hybrid
0
10
20
30
40
50
60
70
Final
Hybrid M
nfident
orcycle Bus
Complete H
Final Assemb
d Motorcycle
Assembly ProMillion US
Motorcy
siness Sale
ybrid Motorc
bly Productio
Estimate SaleUS$
oduction Line SS$ (0.5 M US$
ycle Glo
e Profits Fo
cycle Estimat
n Line Sales
es Profit in mil
Sales Forcast $/line)
obal Ma
orecast
e Sales Profi
profits Forec
llion
in
arketing
ts in million U
cast in Million
201US
201US
201US
201US
201US
201
201
201
201
201
g
US$
n US$
10 ‐ US$425/U$2.13M
11 ‐ US$375/U$45M
12 ‐ US$325/U$97.5M
13 ‐ US$295/U$132.75M
14 ‐ US$275/U$275M
10 ‐ 3 Lines, U
11 ‐ 25 Lines, U
12 ‐ 60 Lines. U
13 ‐ 90 Lines, U
14 ‐ 122 Lines,
2009
16
Unit, Total
Unit, Total
Unit, Total
Unit, Total
Unit, Total
S$1.5M
US$12.5M
US$30M
US$45M
, US$61M
Comme
0
50
100
150
200
250
300
350
400
450
CAU H
ercial in Con
Hybrid Com
ECU & Sens
Motor & Con
Battery char
Fuel Injectio
Sub- Total
ECU & Sen
Hybrid M
nfident
CAU H
mponents
sors
ntroller
rger & BMS
on System
nsors MCo
Motorcy
Hybrid compon
2010
0.75
0.24
0.36
0.028
US$1.378
Motor & ontroller
ycle Glo
nents sale profi
20
11
6
9
0.
8M US$2
Battery char& BMS
obal Ma
its forecast in M
011 20
.25 3
6 1
9 2
28 5
6.53M US$
rger Fuel Sy
arketing
Million US$
012 20
30 6
18 3
27 5
56 19
$131M US$3
Injection ystem
g
013 201
60 10
36 60
54 90
96 42
346M US$6
2010 ‐
2011 ‐
2012 ‐
2013 ‐
2014 ‐
2009
17
14
05
0
0
20
675M
US$1.378M
US$26.53M
US$131M
US$346M
US$675M
Comme
0
200
400
600
800
1000
1200
CAU H
ercial in Con
CAU Hyb
Hybrid M
nfident
CAU Hybrid
brid Motorcyc
Motorcy
Motorcycle est
cle estimate g
ycle Glo
timate gross pr
gross profits (M
obal Ma
rofits in million
Million US$ )
arketing
n US$ (2010~20
g
014)
2010 ‐ U
2011 ‐ U
2012 ‐ U
2013 ‐ U
2014 ‐US
2009
18
US$5.008M
US$84.03M
US$258.5M
US$523.75M
S$1,011M