HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES · HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES...

15
HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES PB-CT-HVAC THESE PRICES EFFECTIVE NOVEMBER 1, 2018 ® Phone: 219/879-8000 | Fax: 219/872-9057 Email: [email protected] | Web: dwyer-inst.com DWYER INSTRUMENTS, INC. - DISCOUNT SCHEDULE Note: Industrial Discount Schedule* Quantity of Each Item Discounts Standard Schedule B Each item (model, range, part number, etc.) is discounted independently. In an order for more than one item, different items cannot be combined to earn a greater discount. Most items are subject to STANDARD schedule at right. Prices followed by the symbol b are subject to discounts per schedule B. Certain items such as repairs, repair parts, EXPL and WP housings, prices followed by the symbol n, special scale and tag charges are priced at net and earn no discount. 1-24 25-99 100-249 250-499 500-Up Net 5% 10% 15% 20% Net Net 5% 10% 15% *Please contact us for discount schedules for other account types. DWYER INSTRUMENTS, INC. - TERMS AND CONDITIONS OF SALE – MARCH 15, 2017 1. Prices and Specifications are subject to change without notice. 2. Shipping dates are approximate. They are dependent upon credit approval and subject to delays beyond our control. 3. Terms: Net 30 days to companies with established credit rating. In the event Buyer fails to fulfill previous terms of payment, or in case Seller shall have any doubt at any time as to Buyer’s financial responsibility, Seller may decline to make further deliveries except upon receipt of cash in advance or other special arrangements. 4. Point and Title: All material is sold EXW Ex Works Dwyer Instruments, Inc. Title to all material sold shall pass to buyer upon delivery by Seller to carrier at shipping point. 5. State and Local Taxes: Any taxes which the Seller may be required to pay or collect upon or with respect to the sale, purchase, delivery, use or consumption of any of the material covered hereby shall be for the account of the Buyer and shall be added to the purchase price. 6. Special tooling, dies, silk screens and molds acquired specially to produce goods for Buyer remain the property of Dwyer Instruments, Inc., and may not be removed. They will be maintained in good condition for a minimum period of three years from the date of the original purchase order. 7. Trade Compliance: Buyer acknowledges that the products, software, and technology, including technical information and documents (collectively “Items”), of Dwyer Instruments, Inc., are subject to regulation by agencies of the U.S. government including, but not limited to, the U.S. Department of Commerce. Buyer shall comply with the Export Administration Regulations (EAR) and all applicable U.S.laws and regulations regarding the sale, delivery and transfer of said Items. Buyer shall not, without first obtaining the required licenses, authorizations or approvals from the appropriate U.S. government agency; (i) export, re-export, transfer or divert any Item directly or indirectly to any country or national resident thereof, or any person, entity or country that has restrictions imposed upon them by the U.S. government, (ii) engage in, or knowingly sell to any party engaged in activity related to the development, production, use, testing, or maintenance of Weapons of Mass Destruction, including uses related to nuclear, missile, chemical or biological warfare, or (iii) engage in, or knowingly sell to any party engaged in activity related to the development, production, use, or maintenance of any safeguarded or unsafeguarded nuclear fuel facility or components for such facilities. Buyer shall fully cooperate with Seller, without charge, in any official audit or inspection by an authorized agent, official, employee, or accredited representative of the U.S. government. Buyer shall indemnify and hold Seller harmless from, or in connection with, any violation of this Section by Buyer, its employees, consultants, agents, or customers. The obligations, requirements and claims described herein shall survive the expiration of any business relationship with Dwyer Instruments, Inc., including its divisions, subsidiaries and affiliated companies. 8. Distribution: Products sold to any entity located in the U.S. must remain in the U.S. unless a Global Distribution Agreement is in force with said entity. OEM’s are excluded from this requirement. Those who violate this term are subject to a reduction of discount, loss of discount, or exclusion from purchasing future products. If you want to be a Global Distributor, please contact your Global Sales Manager in your region. 9. Limited Warranty: The Seller warrants all Dwyer instruments and equipment to be free from defects in workmanship or material under normal use and service for a period of one year from date of shipment. Products qualifying for an extended warranty period will have the extended warranty as expressly indicated on the catalog page, web page, IOM, or will be covered by a specific written agreement that is (i) approved by an officer of Dwyer Instruments, Inc. and (ii) defines the warranty period. If no express statement of extended warranty is made, then the standard 1 year warranty applies. The Extended Limited Warranty only applies to products manufactured after April 1, 2017. The Warranty period extends from the date of shipment to the initial customer and not the project installation date or use. Specific warranty exclusions include, but are not limited to: • Specific product components not covered by the extended warranty: o Humidity Sensors o Batteries o Electro-Chemical Gas Sensors o Snap Switches o Any component which exceed its normal life cycle o Other Specific items added as required. • Normal or excessive wear and tear is not cause for warranty replacement. • Products not properly maintained, operated, installed, or use in an application not suited for the product. • Modifications, alterations, changes, or additions outside those which are required for normal operation. • Failure to notify Dwyer of any defect within a reasonable time. • Damage which the customer has not taken timely action to minimize or mitigate. • Products on which the labels, markings, nameplates, etc. have been tampered with. • Products which contain broken factory seals or have been tampered with shall void warranty. Liability under this warranty is limited to repair or replacement EXW Ex Works Dwyer Instruments, Inc. of any parts which prove to be defective within that time or repayment of the purchase price at the Seller’s option. All products must be returned to the Seller, transportation prepaid, unless other arrangements have been pre-approved by Seller. All technical advice, recommendations and services are based on technical data and information which the Seller believes to be reliable and are intended for use by persons having skill and knowledge of the business, at their own discretion. In no case is Seller liable beyond replacement of equipment EXW Ex Works Dwyer Instruments, Inc. or the full purchase price. This warranty does not apply if the maximum ratings label is removed or if the instrument or equipment is abused, altered, used at ratings above the maximum specified, or otherwise misused in any way. THIS EXPRESS LIMITED WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER REPRESENTATIONS MADE BY ADVERTISEMENTS OR BY AGENTS AND ALL OTHER WARRANTIES, BOTH EXPRESS AND IMPLIED. THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE FOR GOODS COVERED HEREUNDER. 10. Buyer’s Remedies: THE BUYER’S EXCLUSIVE AND SOLE REMEDY ON ACCOUNT OF OR IN RESPECT TO THE FURNISHING OF NON-CONFORMING OR DEFECTIVE MATERIAL SHALL BE TO SECURE REPLACEMENT THEREOF AS AFORESAID. THE SELLER SHALL NOT IN ANY EVENT BE LIABLE FOR THE COST OF ANY LABOR EXPENDED ON ANY SUCH MATERIAL OR FOR ANY SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES TO ANYONE BY REASON OF THE FACT THAT IT SHALL HAVE BEEN NON-CONFORMING OR DEFECTIVE. 11. Acceptance: All orders shall be subject to the terms and conditions contained or referred to in the Seller’s quotation, acknowledgment, and to those listed here and to no others whatsoever. By placing an order you accept our terms and conditions. No waiver, alteration or modification of these terms and conditions shall be binding unless in writing and signed by an executive officer of the Seller. All orders are subject to written acceptance by Dwyer Instruments, Inc., Michigan City, Indiana, U.S.A.

Transcript of HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES · HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES...

Page 1: HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES · HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES PB-CT-HVAC THESE PRICES EFFECTIVE NOVEMBER 1, 2018 ... or if the instrument or equipment

HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES

PB-CT-HVAC

THESE PRICES EFFECTIVE NOVEMBER 1, 2018

®

Phone: 219/879-8000 | Fax: 219/872-9057 Email: [email protected] | Web: dwyer-inst.com

DWYER INSTRUMENTS, INC. - DISCOUNT SCHEDULE

Note:

Industrial Discount Schedule*Quantity ofEach Item

DiscountsStandard Schedule B

Each item (model, range, part number, etc.) is discounted independently. In an order for more than one item, different items cannot be combined to earn a greater discount. Most items are subject to STANDARD schedule at right. Prices followed by the symbol b are subject to discounts per schedule B. Certain items such as repairs, repair parts, EXPL and WP housings, prices followed by the symbol n, special scale and tag charges are priced at net and earn no discount.

1-2425-99100-249250-499500-Up

Net5%10%15%20%

NetNet5%10%15%

*Please contact us for discount schedules for other account types.

DWYER INSTRUMENTS, INC. - TERMS AND CONDITIONS OF SALE – MARCH 15, 20171. PricesandSpecificationsare subject to change without notice.2. Shipping dates are approximate. They are dependent upon credit approval and subject to delays beyond our control.3. Terms: Net 30 days to companies with established credit rating. In the event Buyer fails to fulfill previous terms of payment, or in case Seller shall have any doubt at any time as to Buyer’s financial responsibility, Seller may decline to make further deliveries except upon receipt of cash in advance or other special arrangements.4. Point and Title: All material is sold EXW Ex Works Dwyer Instruments, Inc. Title to all material sold shall pass to buyer upon delivery by Seller to carrier at shipping point.5. State and Local Taxes: Any taxes which the Seller may be required to pay or collect upon or with respect to the sale, purchase, delivery, use or consumption of any of the material covered hereby shall be for the account of the Buyer and shall be added to the purchase price.6. Special tooling, dies, silk screens and molds acquired specially to produce goods for Buyer remain the property of Dwyer Instruments, Inc., and may not be removed. They will be maintained in good condition for a minimum period of three years from the date of the original purchase order.7. Trade Compliance: Buyer acknowledges that the products, software, and technology, including technical information and documents (collectively “Items”), of Dwyer Instruments, Inc., are subject to regulation by agencies of the U.S. government including, but not limited to, the U.S. Department of Commerce. Buyer shall comply with the Export Administration Regulations (EAR) and all applicable U.S.laws and regulations regarding the sale, delivery and transfer of said Items. Buyer shall not, without first obtaining the required licenses, authorizations or approvals from the appropriate U.S. government agency; (i) export, re-export, transfer or divert any Item directly or indirectly to any country or national resident thereof, or any person, entity or country that has restrictions imposed upon them by the U.S. government, (ii) engage in, or knowingly sell to any party engaged in activity related to the development, production, use, testing, or maintenance of Weapons of Mass Destruction, including uses related to nuclear, missile, chemical or biological warfare, or (iii) engage in, or knowingly sell to any party engaged in activity related to the development, production, use, or maintenance of any safeguarded or unsafeguarded nuclear fuel facility or components for such facilities. Buyer shall fully cooperate with Seller, without charge, in any official audit or inspection by an authorized agent, official, employee, or accredited representative of the U.S. government. Buyer shall indemnify and hold Seller harmless from, or in connection with, any violation of this Section by Buyer, its employees, consultants, agents, or customers. The obligations, requirements and claims described herein shall survive the expiration of any business relationship with Dwyer Instruments, Inc., including its divisions, subsidiaries and affiliated companies.8. Distribution: Products sold to any entity located in the U.S. must remain in the U.S. unless a Global Distribution Agreement is in force with said entity. OEM’s are excluded from this requirement. Those who violate this term are subject to a reduction of discount, loss of discount, or exclusion from purchasing future products. If you want to be a Global Distributor, please contact your Global Sales Manager in your region.9. Limited Warranty: The Seller warrants all Dwyer instruments and equipment to be free from defects in workmanship or material under normal use and service for a period of one year from date of shipment. Products qualifying for an extended warranty period will have the extended warranty as expressly indicated on the catalog page, web page, IOM, or will be covered by a specific written agreement that is (i) approved by an officer of Dwyer Instruments, Inc. and (ii) defines the warranty period. If no express statement of extended warranty is made, then the standard 1 year warranty applies. The Extended Limited Warranty only applies to products manufactured after April 1, 2017. The Warranty period extends from the date of shipment to the initial customer and not the project installation date or use.

Specific warranty exclusions include, but are not limited to: • Specific product components not covered by the extended warranty: o Humidity Sensors o Batteries o Electro-Chemical Gas Sensors o Snap Switches o Any component which exceed its normal life cycle o Other Specific items added as required. • Normal or excessive wear and tear is not cause for warranty replacement. • Products not properly maintained, operated, installed, or use in an application not suited for the product. • Modifications, alterations, changes, or additions outside those which are required for normal operation. • Failure to notify Dwyer of any defect within a reasonable time. • Damage which the customer has not taken timely action to minimize or mitigate. • Products on which the labels, markings, nameplates, etc. have been tampered with. • Products which contain broken factory seals or have been tampered with shall void warranty.

Liability under this warranty is limited to repair or replacement EXW Ex Works Dwyer Instruments, Inc. of any parts which prove to be defective within that time or repayment of the purchase price at the Seller’s option. All products must be returned to the Seller, transportation prepaid, unless other arrangements have been pre-approved by Seller. All technical advice, recommendations and services are based on technical data and information which the Seller believes to be reliable and are intended for use by persons having skill and knowledge of the business, at their own discretion. In no case is Seller liable beyond replacement of equipment EXW Ex Works Dwyer Instruments, Inc. or the full purchase price. This warranty does not apply if the maximum ratings label is removed or if the instrument or equipment is abused, altered, used at ratings above the maximum specified, or otherwise misused in any way. THIS EXPRESS LIMITED WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER REPRESENTATIONS MADE BY ADVERTISEMENTS OR BY AGENTS AND ALL OTHER WARRANTIES, BOTH EXPRESS AND IMPLIED. THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE FOR GOODS COVERED HEREUNDER.

10. Buyer’s Remedies: THE BUYER’S EXCLUSIVE AND SOLE REMEDY ON ACCOUNT OF OR IN RESPECT TO THE FURNISHING OF NON-CONFORMING OR DEFECTIVE MATERIAL SHALL BE TO SECURE REPLACEMENT THEREOF AS AFORESAID. THE SELLER SHALL NOT IN ANY EVENT BE LIABLE FOR THE COST OF ANY LABOR EXPENDED ON ANY SUCH MATERIAL OR FOR ANY SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES TO ANYONE BY REASON OF THE FACT THAT IT SHALL HAVE BEEN NON-CONFORMING OR DEFECTIVE.11. Acceptance: All orders shall be subject to the terms and conditions contained or referred to in the Seller’s quotation, acknowledgment, and to those listed here and to no others whatsoever. By placing an order you accept our terms and conditions. No waiver, alteration or modification of these terms and conditions shall be binding unless in writing and signed by an executive officer of the Seller. All orders are subject to written acceptance by Dwyer Instruments, Inc., Michigan City, Indiana, U.S.A.

Page 2: HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES · HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES PB-CT-HVAC THESE PRICES EFFECTIVE NOVEMBER 1, 2018 ... or if the instrument or equipment

DWYER INSTRUMENTS, INC. | www.dwyer-inst.com1

CATALOG PAGE 13

CATALOG PAGE 15

SMART AIR HOOD® BALANCING INSTRUMENTQuad Flow Design Technology, Predictive Balancing

SERIES SAH®

UNIVERSAL HANDHELD TEST INSTRUMENTRugged Weatherproof Case, Works with Wireless Sensors

MODEL UHH2

ACCESSORIESModel Description PriceA-SAH-14SA-SAH-24SA-SAH-33SA-SAH-15SA-SAH-BKA-SAH-CK

A-SAH-12PNISTCALM-SAH

Canvas hood 1´ x 4´ (0.3 m x 1.2 m)Canvas hood, 2´ x 4´ (0.6 m x 1.2 m)Canvas hood, 3´ x 3´ (0.9 m x 0.9 m)Canvas hood, 1´ x 5´ (0.3 m x 1.5 m)SAH adapter base kit for canvas hoodSpare calibration kit with four Quad Flow Sensing Grids and Sensor Module4.5´ to 12´ (1.4 m x 3.7 m) extendable pole Re-certification service. Please contact your regional Dwyer distributor or Dwyer International Sales Office for scheduling your NIST recertification

$150.00150.00150.00150.00550.00495.00

60.00295.00

MODEL CHARTModel Description PriceSAH-22

A-SAH-12P

SMART Air Hood® Balancing Instrument with 2´ x 2´ (0.6 m x 0.6 m) opening4.5´ to 12´ (1.4 m x 3.7 m) extendable pole (Required for operation)

$3300.00

60.00

MODEL CHARTModel Description PriceUHH2AP2RP2VP2WDPM-002WDPM-005WDPM-010WDPM-020WDPM-030WDPM-100WDPM-200WDPM-350

Universal handheld base unitWireless thermo-anemometer, air velocity, & temperature probeWireless thermo-hygrometer, humidity, and temperature probeWireless 100 mm vane thermo-anemometer, air velocity, temperature, and humidity probeWireless differential pressure module, ±2 in w.c. (498.18 Pa)Wireless differential pressure module, ±5 in w.c. (1245.4 Pa)Wireless differential pressure module, ±10 in w.c. (2490.9 Pa)Wireless differential pressure module, ±20 in w.c. (4981.8 Pa)Wireless differential pressure module, ±30 in w.c. (7472.7 Pa)Wireless differential pressure module, ±100 in w.c. (24909 Pa)Wireless differential pressure module, ±200 in w.c. (49818 Pa)Wireless differential pressure module, ±350 in w.c. (87181 Pa)

$613.00361.00294.00387.00

85.0085.0085.0085.0085.0085.0085.0085.00

ACCESSORIESModel Description PriceKF-CC-304UHH-C1UHH-C2UHH-CBLUHH-CBL2UHH-ICHRG

Dual USB charger with North American adapter (1.5 A)Soft carrying caseHeavy duty hard case with pre-cut foam inserts for additional sensorsUSB to mini-USB cableUSB to micro-USB cableUHH dual USB charger with international adapters (1.0 A) (Not CE approved)

$13.5039.00

227.005.205.20

21.75

Page 3: HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES · HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES PB-CT-HVAC THESE PRICES EFFECTIVE NOVEMBER 1, 2018 ... or if the instrument or equipment

2DWYER INSTRUMENTS, INC. | www.dwyer-inst.com

CATALOG PAGE 16

CATALOG PAGE 17

AIR QUALITY TEST INSTRUMENT KITSAQTIA Combines the UHH2 Universal Handheld with Compatible Probes

SERIES AQTIA®

WIRELESS MOBILE GATEWAYConverts UHH Probe Wireless Signals to Bluetooth SIG, Inc. Wireless Technology

MODEL UHH-BTG

MODEL CHARTModel Parameters Range Engineering Units Available PriceAQTIA-AP2AQTIA-RP2AQTIA-VP2

AQTIA-WDPM-002AQTIA-WDPM-005AQTIA-WDPM-010AQTIA-WDPM-020AQTIA-WDPM-030AQTIA-WDPM-100AQTIA-WDPM-200AQTIA-WDPM-350

Velocity/temperatureHumidity/temperatureVelocity/RH/temperature

PressurePressurePressurePressurePressurePressurePressurePressure

0 to 6000 FPM; -20 to 212°F0 to 100% RH; -20 to 140°F40 to 5000 FPM; 0 to 100% RH; -4 to 140°F±2 in w.c. (498.18 Pa)±5 in w.c. (1245.4 Pa)±10 in w.c. (2490.9 Pa)±20 in w.c. (4981.8 Pa)±30 in w.c. (7472.7 Pa)±100 in w.c. (24909 Pa)±200 in w.c. (49818 Pa)±350 in w.c. (87181 Pa)

Velocity: fps, fpm, mph, knots, m/s, m/h, k/h; Temperature: °F, °C, °KHumidity: %RH; Temperature: °F, °C, °KVelocity: fps, fpm, mph, knots, m/s, m/h, k/h; Temperature: °F, °C, °K

in w.c., ft w.c., in Hg, psi, oz/in2; mm w.c., cm w.c., mbar, Pa, hPa, kPain w.c., ft w.c., in Hg, psi, oz/in2; mm w.c., cm w.c., mbar, Pa, hPa, kPain w.c., ft w.c., in Hg, psi, oz/in2; mm w.c., cm w.c., mbar, Pa, hPa, kPain w.c., ft w.c., in Hg, psi, oz/in2; mm w.c., cm w.c., mbar, Pa, hPa, kPain w.c., ft w.c., in Hg, psi, oz/in2; mm w.c., cm w.c., mbar, Pa, hPa, kPain w.c., ft w.c., in Hg, psi, oz/in2; mm w.c., cm w.c., mbar, Pa, hPa, kPain w.c., ft w.c., in Hg, psi, oz/in2; mm w.c., cm w.c., mbar, Pa, hPa, kPain w.c., ft w.c., in Hg, psi, oz/in2; mm w.c., cm w.c., mbar, Pa, hPa, kPa

$974.00907.00

1000.00

974.00974.00974.00974.00974.00974.00974.00974.00

Note: AQTIA series models supplied with: UHH2, UHH-BTG, wireless sensing probe, soft carrying case (UHH-C1), charging cable (UHH-CBL2), and headphones.Note: Pro series models supplied with: UHH2, UHH-BTG, wireless sensing probe, soft carrying case (UHH-C1), charging cable (UHH-CBL2), headphones, heavy duty hard case with pre-cut foam inserts for additional sensors (UHH-C2), and NIST calibration certificate. For pro series models, replace AQTIA with AQTIAP and add +$361.00.

MODEL CHART - PROFESSIONAL KITSModel Probes Provided Parameters Range Engineering Units Available PriceAQTIAP-WDPM-002-PKIT WDPM-002

AP2

RP2VP2

Pressure

Velocity/temperature

Humidity/temperatureVelocity/RH/temperature

±2 in w.c. (498.18 Pa)

0 to 6000 FPM; -20 to 212°F

0 to 100% RH; -20 to 140°F40 to 5000 FPM; 0 to 100% RH; -4 to 140°F

in w.c., ft w.c., in Hg, psi, oz/in2; mm w.c., cm w.c., mbar, Pa, hPa, kPaVelocity: fps, fpm, mph, knots, m/s, m/h, k/h; Temperature: °F, °C, °KHumidity: %RH; Temperature: °F, °C, °KVelocity: fps, fpm, mph, knots, m/s, m/h, k/h; Temperature: °F, °C, °K

$3085.00

AQTIAP-WDPM-005-PKIT WDPM-005

AP2

RP2VP2

Pressure

Velocity/temperature

Humidity/temperatureVelocity/RH/temperature

±5 in w.c. (1245.4 Pa)

0 to 6000 FPM; -20 to 212°F

0 to 100% RH; -20 to 140°F40 to 5000 FPM; 0 to 100% RH; -4 to 140°F

in w.c., ft w.c., in Hg, psi, oz/in2; mm w.c., cm w.c., mbar, Pa, hPa, kPaVelocity: fps, fpm, mph, knots, m/s, m/h, k/h; Temperature: °F, °C, °KHumidity: %RH; Temperature: °F, °C, °KVelocity: fps, fpm, mph, knots, m/s, m/h, k/h; Temperature: °F, °C, °K

3085.00

AQTIAP-WDPM-010-PKIT WDPM-010

AP2

RP2VP2

Pressure

Velocity/temperature

Humidity/temperatureVelocity/RH/temperature

±10 in w.c. (± 2.5 kPa)

0 to 6000 FPM; -20 to 212°F

0 to 100% RH; -20 to 140°F40 to 5000 FPM; 0 to 100% RH; -4 to 140°F

in w.c., ft w.c., in Hg, psi, oz/in2, mm w.c., cm w.c., mBar, Pa, hPa, and kPaVelocity: fps, fpm, mph, knots, m/s, m/h, k/h; Temperature: °F, °C, °KHumidity: %RH; Temperature: °F, °C, °KVelocity: fps, fpm, mph, knots, m/s, m/h, k/h; Temperature: °F, °C, °K

3085.00

Note: Full professional kits supplied with UHH2, UHH-BTG, AP2 thermo-anemometer probe, RP2 thermo-hygrometer probe, VP2 thermo-anemometer probe, WDPM wireless differential pressure module, 160-18 stainless steel pitot tube, 160F straight stainless steel pitot tube, 160G averaging air flow grid, (2) A-303 portable static pressure tip, soft carrying case (UHH-C1), charging cable (UHH-CBL2), headphones, heavy duty hard case with pre-cut foam inserts for additional sensors (UHH-C2), and NIST calibration certificates.

MODEL CHARTModel Description PriceUHH-BTG Wireless mobile gateway $94.00

ACCESSORIESModel Description PriceUHH-ICHRG Dual USB charger $21.75

MODEL CHART - CONVERTS THESE WIRELESS PROBES FOR USE WITH OUR MOBILE METER® SOFTWARE MOBILE APPModel Description PriceAP2RP2VP2WDPM-002WDPM-005WDPM-010WDPM-020WDPM-030WDPM-100WDPM-200WDPM-350

Wireless thermo-anemometer probeWireless thermo-hygrometer probeWireless 100 mm vane thermo-anemometer probeWireless differential pressure probe ±2 in w.c.Wireless differential pressure probe ±5 in w.c.Wireless differential pressure probe ±10 in w.c.Wireless differential pressure probe ±20 in w.c.Wireless differential pressure probe ±30 in w.c.Wireless differential pressure probe ±100 in w.c.Wireless differential pressure probe ±200 in w.c.Wireless differential pressure probe ±350 in w.c.

$361.00294.00387.00

85.0085.0085.0085.0085.0085.0085.0085.00

Note: See wireless probe catalog page on the web for full specifications.u

Page 4: HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES · HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES PB-CT-HVAC THESE PRICES EFFECTIVE NOVEMBER 1, 2018 ... or if the instrument or equipment

DWYER INSTRUMENTS, INC. | www.dwyer-inst.com3

THERMO-ANEMOMETER PROBEWireless, Measures Velocity, Flow, and Temperature

100 MM VANE THERMO-ANEMOMETER PROBEWireless, Measures Velocity, Flow, Humidity, and Temperature

THERMO-HYGROMETER PROBEWireless, Measures Humidity, Temperature, Dew Point, and Wet Bulb Temperatures

MODEL RP2®

MODEL AP2

MODEL VP2

CATALOG PAGE 18

CATALOG PAGE 18

CATALOG PAGE 18

CATALOG PAGE 19

CATALOG PAGE 19

THERMO-HYGROMETERMeasures % RH, Temperature, Dew Point and Wet Bulb

MODEL 485B

INDOOR AIR QUALITY METERMeasures CO2, Temperature and Humidity

MODEL AQH-20

MODEL CHARTModel Description PriceRP2 Wireless thermo-hygrometer probe for use with the Model UHH

handheld meter and the Mobile Meter® Software Test Instrument Mobile App

$294.00

MODEL CHARTModel Description PriceVP2 Wireless 100 mm vane thermo-anemometer probe for use with the

Model UHH handheld meter and the Mobile Meter® Software Test Instrument Mobile App

$387.00

MODEL CHARTModel Probe Length PriceAP2AP2-18AP2-24AP2-36

8˝ (203.2 mm)18˝ (457.2 mm)24˝ (609.6 mm)36˝ (914.4 mm)

$361.00376.00382.00392.00

MODEL CHARTModel Description Price485B-1 Digital thermo-hygrometer includes 9V battery, sensing

probe, wrist strap, soft carrying case and instructions$284.00

ACCESSORIESModel Description PriceRP1

UHH-C1A-47X-BOOT

Thermo-hygrometer % RH and temperature probe with coiled cableSoft carrying caseProtective magnetic rubber boot

$170.00

39.0013.00

MODEL CHARTModel CO2 Range Humidity Range Temperature Range PriceAQH-20 0 to 2000 ppm 0.0 to 99.9% 14 to 140°F (-10 to 60°C) $277.00

ACCESSORIESModel Description PriceTH-CAL 33% and 75% salt bath calibration standards $131.00

OPTIONSUse order code: Description Price-NIST NIST traceable calibration certificate $121.00

Page 5: HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES · HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES PB-CT-HVAC THESE PRICES EFFECTIVE NOVEMBER 1, 2018 ... or if the instrument or equipment

4DWYER INSTRUMENTS, INC. | www.dwyer-inst.com

100 MM VANE THERMO-ANEMOMETER TEST INSTRUMENTMeasures Air Velocity or Air Volume, Temperature, and Humidity Simultaneously

MODEL 473B®

CATALOG PAGE 20

CATALOG PAGE 21

CATALOG PAGE 22

THERMO-ANEMOMETER TEST INSTRUMENTMeasures Air Velocity or Air Volume and Temperature Simultaneously

MODEL 471B

HYDRONIC DIFFERENTIAL PRESSURE METER KITLiquid and Gas Pressure Measurement, ±0.5% FS Accuracy

SERIES 490A-HKIT

MODEL CHARTModel Description Price473B-1 Vane thermo-anemometer test instrument $411.00

OPTIONSTo orderadd suffix: Description Price-COC-FC-NIST

Certificate of calibrationFactory calibration certificateNIST traceable calibration certificate

-+$30.00+215.00

Example: 473B-1-NIST

ACCESSORIESModel Description PriceA-47X-BOOTA-VPX-CKITAP1*RP1*UHH-C1VP1*

Protective magnetic rubber bootVane hood kitHot wire thermo-anemometer probe with coiled cableThermo-hygrometer probe with coiled cableSoft carrying case100 mm vane thermo-anemometer probe with coiled cable (replacement)

$13.00322.00206.00170.00

39.00232.00

*Consult website for more details.

ACCESSORIES - CASESModel Description PriceUHH-C1A-160-CASEA-47X-BOOT

Spare soft carrying caseHard carrying case for longer probes (18˝ to 36˝)Protective magnetic rubber boot

$39.00171.00

13.00

ACCESSORIES - PROBESModel Probe Length Description PriceAP1

AP1-18

AP1-24

AP1-36

18˝

24˝

36˝

Thermo anemometer air velocity & temperature probe with coiled cableThermo anemometer air velocity & temperature probe with coiled cableThermo anemometer air velocity & temperature probe with coiled cableThermo anemometer air velocity & temperature probe with coiled cable

$206.00

222.00

227.00

237.00

MODEL CHARTModel Description Price471B-1 Digital thermo anemometer includes 9V battery, sensing probe, wrist

strap, soft carrying case and instructions$386.00

MODEL CHART

ModelRange(psi)

Available Pressure Units & Resolution** MaximumPressure Pricebar psi in Hg kPa in w.c. mm Hg mbar ft w.c.

490A-1-HKIT490A-2-HKIT490A-3-HKIT490A-4-HKIT490A-5-HKIT490A-6-HKIT

0 to 150 to 300 to 500 to 1000 to 5000 to 200

1.0342.0693.4476.89534.4713.79

15.0030.0050.00100.0500.0200.0

30.5461.08101.8203.61018407.2

103.4206.9344.7689.534471379

415.2830.4138427689999*5536

775.71551258551719999*9999*

10342069344768959999*9999*

34.6069.20115.3230.71153461.3

30 psig60 psig100 psig200 psig1000 psig400 psig

$2044.002044.002044.002044.002044.002044.00

*Digits will display smaller units until all 4 digits are exceeded.**Readings less than 10% of range will provide one additional decimal place than shown for higher resolution.

ACCESSORIESModel Description PriceA-47X-BOOTA-HKIT-AFIT

A-HKIT-BFITA-HKIT-HOSES

A-HKIT-500A-HKIT-500XLA-HKIT-510NIST Calibration

Rubber boot for manometers (manometer no included)Adapter fitting kit for the 490A-HKIT, includes pairs of SAE 1/4˝ adapters and elbow fittingsAdapter fitting kit for the 490A-HKIT, includes pair of bleed fitting assembliesOne pair red & blue 60˝ SAE replacement hoses for the 490A-HKIT, each with integral ball valvePiercing gage adapter for the 490A-HKIT, 1/8˝ dia x 1-1/2˝ length (2 per kit)Piercing gage adapter for the 490A-HKIT, 1/8˝ dia x 3˝ length (2 per kit)Piercing gage adapter for the 490A-HKIT, 1/16˝ dia x 1-1/2˝ length (2 per kit)Please contact your regional Dwyer distributor or Dwyer Internatioal Sales Office for scheduling your NIST recertification

$13.00 32.50

30.5057.00

45.5081.0066.00

109.00

OPTIONSUse order code: Description Price-NIST NIST traceable calibration certificate $215.00

Page 6: HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES · HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES PB-CT-HVAC THESE PRICES EFFECTIVE NOVEMBER 1, 2018 ... or if the instrument or equipment

DWYER INSTRUMENTS, INC. | www.dwyer-inst.com5

DIFFERENTIAL PRESSURE MODULESWireless, Measures Differential Pressure, Air Velocity, and Flow

HANDHELD ACCESSORIES

SERIES WDPM®

SERIES UHH-ACC

CATALOG PAGE 23

CATALOG PAGE 23

CATALOG PAGE 24

HANDHELD DIGITAL MANOMETERMeasures Pressure, Flow and Velocity; ±0.5% Accuracy

SERIES 477AV

MODEL CHARTModel Range Maximum Pressure PriceWDPM-002WDPM-005WDPM-010WDPM-020WDPM-030WDPM-100WDPM-200WDPM-350

±2 in w.c. (±500 Pa)±5 in w.c. (±1250 Pa)±10 in w.c. (±2.5 kPa)±20 in w.c. (±5 kPa)±30 in w.c. (±7.5 kPa)±100 in w.c. (±25 kPa)±200 in w.c. (±50 kPa)±350 in w.c. (±87 kPa)

10 psi (68.9 kPa)10 psi (68.9 kPa) 10 psi (68.9 kPa)20 psi (137.9 kPa) 20 psi (137.9 kPa)15 psi (103.4 kPa)45 psi (310.3 kPa)45 psi (310.3 kPa)

$85.0085.0085.0085.0085.0085.0085.0085.00

ACCESSORIESModel Description PriceA-WDPM-BRK Differential pressure mounting bracket $10.25

ACCESSORIESModel Description PriceA-402A

UHH-C1A-47X-BOOT

Carrying case; tough gray nylon pouch protects any Series 477AV Manometer; double zippered for quick and easy access, with a belt loop that snaps closed; 7-1/2˝H x 3˝W x 2-1/4˝D (191 x 76 x 57 mm)Soft carrying caseProtective magnetic rubber boot

$42.25

39.0013.00

OPTIONSTo order add suffix: Description Price-NIST NIST traceable calibration certificate +$109.00Example: 477AV-1-NIST

MODEL CHART

Model PricePressureRange

Velocity Range Available Pressure Units

Maximum Pressurefpm m/s psi in Hg kPa in w.c.

mm Hg mbar mm w.c. Pa ft w.c. oz/in2 hPa

cm w.c.

477AV-000

477AV-00

477AV-0

477AV-1

477AV-2

477AV-3

477AV-4477AV-5477AV-6477AV-7477AV-8

$295.00

277.00

277.00

277.00

179.00

179.00

179.00179.00179.00179.00179.00

0 to 1.000 in w.c.0 to 4.000 in w.c.0 to 10.00 in w.c.0 to 20.00 in w.c.0 to 40.00 in w.c.0 to 200.0 in w.c.0 to 10.00 psi0 to 20.00 psi0 to 30.00 psi0 to 100.0 psi0 to 150.0 psi

4004

8009

1.266k 1.791k

25.33k

56.63k 66.62k94.22k115.4k 210.7k 258.0k

20.34

40.69

64.33

90.97

128.7

287.7

338.4478.6586.210701311

-

0.1445

0.3613

0.7225

1.445

7.225

10.0020.0030.00100.0150.0

0.0736

0.2942

0.7355

1.471

2.942

14.71

20.3640.7261.08203.6305.4

0.2491

0.996

2.491

4.982

9.96

49.82

68.95137.9206.9689.51034

1.000

4.000

10.00

20.00

40.00

200.0

276.8553.6830.427684152

1.868

7.473

18.68

37.36

74.73

373.6

517.11034155151717757

2.491

9.96

24.91

49.82

99.6

498.2

689.5137920696895-

25.40

101.6

254.0

508.0

1016

5080

7031 ----

249.1

996

2491

4982

9964

-

-----

0.0833

0.3333

0.8333

1.667

3.333

16.67

13.0746.1369.20230.7346.0

0.5780

2.312

5.780

11.56

23.12

115.6

160.0320.0480.016002400

2.491

9.964

24.91

49.82

99.64

498.2

689.5137920686895-

2.540

10.16

25.40

50.80

101.6

508.0

703.1140621097031-

5 psig

5 psig

5 psig

10 psig

10 psig

30 psig

30 psig60 psig60 psig150 psig200 psig

ACCESSORIESModel Description PriceUHH-ICHRG

UHH-CBLUHH-CBL2UHH-C1UHH-SDKF-CC-304

UHH-C2

A-VPX-CKITA-WDPM-BRK

UHH dual USB charger with international adapters(1.0 A) (Not CE approved)USB cableUSB to micro-USB cableSoft carrying case2 GB SD cardDual USB CHARGER with North American adapter(1.5 A)Heavy duty hard case with pre-cut foam inserts for additional sensorsVane hood kitDifferential pressure mounting bracket

$21.75

5.205.20

39.0010.25n13.50b

227.00

322.0010.25

n Items are net priced and are not subject to any discount. b Items are subject to Schedule B discounts.

Page 7: HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES · HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES PB-CT-HVAC THESE PRICES EFFECTIVE NOVEMBER 1, 2018 ... or if the instrument or equipment

6DWYER INSTRUMENTS, INC. | www.dwyer-inst.com

INTRINSICALLY SAFE HANDHELD DIGITAL MANOMETERRanges from 1 in w.c. to 150 psid, ±0.5% Accuracy

SERIES 475®

CATALOG PAGE 25

CATALOG PAGE 26

CATALOG PAGE 27

AIR VELOCITY KITSDigital Manometer and Pitot Tube for Balancing System Air Flows

SERIES 475-AV & 477-AV KITS

SINGLE PRESSURE DIFFERENTIAL PRESSURE DIGITAL MANOMETERSElectronic Zeroing, ±1.5% Accuracy

SERIES 476A & 478A

OPTIONSTo orderadd suffix: Description Price-AV Air velocity kit, includes the Series 475 manometer, two A-303

static pressure tips two 9´ lengths 3/16˝ ID rubber tubing, no. 166-6-CF pitot tube, A-397 step drill, A-532 air velocity slide chart and instruction bulletin H-11, all packed in a tough, molded plastic carrying case with die cut foam liner.

+$161.00

Examples: 475-1-AV, $366.00; 475-000-AV, $435.00-NIST NIST traceable calibration certificate +109.00Example: 475-1-NIST

ACCESSORIESModel Description PriceA-402A

UHH-C1A-47X-BOOT

Carrying case, tough gray nylon pouch protects any Series 475 manometer, double zippered for quick and easy access, belt loop that snaps closed, 7-1/2˝H x 3˝W x 2-1/4˝D (191 x 76 x 57 mm)Soft carrying caseProtective magnetic rubber boot

$42.25

39.0013.00

MODEL CHARTModel English Range Metric Range Maximum Pressure Price475-000-FM475-00-FM475-0-FM475-1-FM475-2-FM475-3-FM475-4-FM475-5-FM475-6-FM475-7-FM475-8-FM

0 to 1.000 in w.c.0 to 4.000 in w.c.0 to 10.00 in w.c.0 to 20.00 in w.c.0 to 40.00 in w.c.0 to 200.0 in w.c.0 to 10.00 psi0 to 20.00 psi0 to 30.00 psi0 to 100.0 psi0 to 150.0 psi

.2491 kPa0.996 kPa2.491 kPa4.982 kPa9.96 kPa49.82 kPa.6895 bar1.379 bar2.069 bar6.895 bar10.34 bar

5 psig5 psig5 psig10 psig10 psig30 psig30 psig60 psig60 psig150 psig200 psig

$274.00205.00205.00205.00147.00147.00147.00147.00147.00147.00147.00

MODEL CHART - 475-XX-FM-AVModel Range Price475-00-FM-AV475-0-FM-AV475-1-FM-AV475-2-FM-AV

0-4.000 in w.c.0-10.00 in w.c.0-20.00 in w.c.0-40.00 in w.c.

$366.00366.00366.00308.00

MODEL CHART - 475-XXT-FM-AVModel Range Price475-00T-FM-AV475-0T-FM-AV475-1T-FM-AV

0-4.000 in w.c.0-10.00 in w.c.0-20.00 in w.c.

$487.00487.00487.00

MODEL CHART - 477AV-XXXT-AVModel Range Price477-000T-AV477-00T-AV477-0T-AV477-1T-AV

0-1.000 in w.c.0-4.000 in w.c.0-10.00 in w.c.0-20.00 in w.c.

$657.00635.00635.00635.00

MODEL CHART

ModelRangein w.c.

Available Pressure Units Resolutionin w.c.

MaximumPressure Pricebar psi in Hg kPa in w.c. mm Hg mbar mm w.c. Pa

476A-0478A-0478A-1

-20.0 to 20.0-4.00 to 4.00-60.0 to 60.0

.0498-.1495

0.723.14452.168

1.471.2944.41

4.980.99614.95

20.004.0060.0

37.47.47112.1

49.89.96149.5

508101.61524

-996-

0.020.01 0.1

5 psig5 psig5 psig

$95.50167.00130.00

OPTIONSTo order add suffix: Description Price-NIST NIST traceable calibration certificate +$109.00Example: 478A-1-NIST

ACCESSORIESModel Description PriceA-402A

UHH-C1A-47X-BOOT

Carrying case, tough gray nylon pouch protects any Series 476A/478A manometer, double zippered for quick and easy access, belt loop that snaps closed, 7-1/2˝H x 3˝W x 2-1/4˝D (191 x 76 x 57 mm)Soft carrying caseProtective magnetic rubber boot

$42.25

39.0013.00

Page 8: HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES · HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES PB-CT-HVAC THESE PRICES EFFECTIVE NOVEMBER 1, 2018 ... or if the instrument or equipment

DWYER INSTRUMENTS, INC. | www.dwyer-inst.com7

HANDHELD DIGITAL MANOMETERPrecise Air Pressure Measurement, ±0.1% Accuracy

SERIES 477B®

CATALOG PAGE 28

CATALOG PAGE 29

CATALOG PAGE 29

PRECISION DIGITAL PRESSURE MANOMETERUp to 0.05% Accuracy, Graphical Display, Data Logging Capability

PRECISION HANDHELD DIGITAL MANOMETERHigh Accuracy (0.2%, 0.1% or 0.05%), Differential, Gage or Absolute

SERIES HM35

SERIES HM28

MODEL CHART

Model RangeAvailable Pressure Units Maximum

Pressure Pricebar psi in Hg kPa in w.c. mm Hg mbar ft w.c. mm w.c. Pa477B-1477B-2477B-3477B-4477B-5477B-6477B-7

0 to 20.00 in w.c.0 to 40.00 in w.c.0 to 200.0 in w.c.0 to 10.00 psi0 to 30.00 psi0 to 50.00 psi0 to 100.0 psi

.0498

.0996

.4982

.68952.0693.4476.895

.72251.4457.22510.0030.0050.00100.0

1.4712.94214.7120.3661.08101.8203.6

4.9829.9649.8268.95206.9344.7689.5

20.0040.00200.0276.8830.413842768

37.3674.73373.6517.1155125855171

49.8299.6498.2689.5206934476895

1.6673.33316.6723.0769.20115.3230.7

508.0101650807031---

49829964-----

3 psig3 psig15 psig30 psig60 psig100 psig200 psig

$405.00405.00405.00405.00405.00405.00405.00

ACCESSORIESModel Description PriceA-402A

UHH-C1A-47X-BOOT

Carrying case; tough gray nylon pouch protects any Series 477B Manometer; double zippered for quick and easy access, with a belt loop that snaps closed; 7-1/2˝H x 3˝W x 2-1/4˝D (191 x 76 x 57 mm)Soft carrying caseProtective magnetic rubber boot

$42.25

39.0013.00

OPTIONSTo order add suffix: Description Price-NIST NIST traceable calibration certificate +$109.00Example: 477B-1-NIST

MODEL CHART - ERROR LIMIT 0.2% FS FOR GAGE, VACUUM, AND DIFFERENTIAL PRESSUREModel Range Over Pressure PriceHM3531DLB300HM3531DLC300HM3531DLE300HM3531DLF300HM3531DLG300HM3531DLH300

0 to 10 in w.c. (0-2.5 kPa)0 to 28 in w.c. (0-7 kPa)0 to 80 in w.c. (0-20 kPa)0 to 120 in w.c. (0-30 kPa)0 to 200 in w.c. (0-50 kPa)0 to 14.5 psi (0-100 kPa)

50 in w.c.140 in w.c.600 in w.c.600 in w.c.58 psi58 psi

$1630.001566.001492.001566.001492.001492.00

Note: For higher accuracy models, change the 10th digit from a 3 to a 1 (0.05% FS), 2 (0.1% FS), or 6 (0.1% of reading); higher accuracies are only available on 0 to 28 in of w.c. range or higher.Example: HM3531DLC100 (0 to 28 in w.c. with 0.05% accuracy); consult factory for pricing.

ACCESSORIESModel Description PriceHM28-0HM35-1HM35-2

HM35-3

1/8˝ NPT adapter (1 piece)Communication software keyInfrared RS-232 serial adapter, required to download stored data to a PCExternal power converter with U.S. plug adapter, input 100 to 240 VAC, 50/60 Hz

$57.50569.00250.00

161.00

OPTIONSUse ordercode: Description PriceNISTCAL-MD NIST traceable

calibration certificate

$109.00

OPTIONSUse ordercode: Description PriceNISTCAL-MD NIST traceable

calibration certificate

$109.00

ACCESSORIESModel Description PriceHM28-0HM28-1

HM28-2

1/8˝ NPT adapter (1 piece)Communication software and cableUniversal power adapter

$57.501036.00

235.00

MODEL CHARTModel Features PriceError limit 0.2% FS for gage, underpressure and differential pressureHM28D3B10000HM28D3C10000HM28D3F10000

0 to 10 in w.c. (2.5 kPa)0 to 28 in w.c. (7 kPa)0 to 120 in w.c. (30 kPa)

$1535.001564.001535.00

Error limit 0.05% FS for gage, underpressure and differential pressureHM28D3C30000HM28D3F30000HM28D3K30000

0 to 28 in w.c. (7 kPa)0 to 120 in w.c. (30 kPa)0 to 100 psi (700 kPa)

2291.002334.002334.00

For absolute pressureHM28A3I10000 0 to 15.9 psia (0.2% FS (110 kPa abs)) 2329.00Note: Consult factory for 0.10% models.

Page 9: HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES · HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES PB-CT-HVAC THESE PRICES EFFECTIVE NOVEMBER 1, 2018 ... or if the instrument or equipment

8DWYER INSTRUMENTS, INC. | www.dwyer-inst.com

FLEX-TUBE® U-TUBE MANOMETERSSERIES 1221/1222/1223

®

CATALOG PAGE 30

CATALOG PAGE 31

CATALOG PAGE 31

CATALOG PAGE 32

CATALOG PAGE 32

SLACK TUBE® MANOMETERSSERIES 1211 & MODEL 1212

DUAL RANGE FLEX-TUBE® U-INCLINED MANOMETERSSERIES 1227

GAS PRESSURE MANOMETERThe “Tube in a Tube” Direct Reading Manometer

SERIES 1213

MOLDED PLASTIC AIR VELOCITY METERSLow in Cost, Direct Reading Scales Offer 3% Accuracy, For Portable or Stationary Applications

SERIES MARK II

OPTIONSTo order add suffix: Description Price-NIST NIST traceable calibration certificate +$109.00Example: 1230-8-W/M-NIST

MODEL CHARTModel Price Model Price Model Price Ranges1221-8-W/M1221-12-W/M1221-16-W/M1221-20-W/M1221-24-W/M1221-36-W/M1221-M200-W/M1221-M300-W/M1221-M400-W/M1221-M600-W/M1221-M1000-W/M

$30.7533.5035.0036.7538.5042.7530.7533.5035.0038.5042.75

1222-8-W/M1222-12-W/M1222-16-W/M1222-20-W/M1222-24-W/M1222-36-W/M1222-M200-W/M1222-M300-W/M1222-M400-W/M1222-M600-W/M1222-M1000-W/M

$41.0044.0045.5047.5048.5057.0041.0044.0045.5048.5057.00

1223-8-W/M1223-12-W/M1223-16-W/M1223-20-W/M1223-24-W/M1223-36-W/M1223-M200-W/M1223-M300-W/M1223-M400-W/M1223-M600-W/M1223-M1000-W/M

$84.0084.5085.0085.5089.5094.0084.0084.5085.0089.5094.00

8 (4-0-4) in w.c.12 (6-0-6) in w.c.16 (8-0-8) in w.c.20 (10-0-10) in w.c.24 (12-0-12) in w.c.36 (18-0-18) in w.c.M200 (100-0-100) mm w.c.M300 (150-0-150) mm w.c.M400 (200-0-200) mm w.c.M600 (300-0-300) mm w.c.M1000 (500-0-500) mm w.c.

Note: To order models with red gage fluid change -W/M to -D.

MODEL CHART

ModelRange,In.

Hg Req’d(oz.) Price

MetricModel

Range,CM

Hg Req’d(oz.) Price

1211-81211-121211-161211-241211-301211-361211-481211-601211-721211-120

4 to 0 to 46 to 0 to 68 to 0 to 812 to 0 to 1215 to 0 to 1518 to 0 to 1824 to 0 to 2430 to 0 to 3036 to 0 to 3660 to 0 to 60

67912-1/21517-1/222-1/2273257

$70.5078.0078.5082.5085.5086.50

103.00109.00109.00117.00

1211-501211-1001211-200

25 to 0 to 2550 to 0 to 50 100 to 0 to 100

1118-1/235

$86.5088.50

111.00

MODEL CHARTModel Description Price1212 Gas pressure kit $95.50

MODEL CHARTModel Description Price12271227M

English unitsMetric units

$85.5085.50

MODEL CHARTModel Length (mm) Price1213-15 7˝ (177.8) $28.25

MODEL CHARTModel Range PriceMark II 27Mark II 28Mark II 40-250 Pa-AV

0 to 7000 FPM0 to 10500 FPM0 to 21 MPS

$53.00194.00

79.50Note: Pitot tube not included with models above.

ACCESSORIESModel Description PriceA-612 Portable stand (for models 27, 28) $38.75

Page 10: HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES · HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES PB-CT-HVAC THESE PRICES EFFECTIVE NOVEMBER 1, 2018 ... or if the instrument or equipment

DWYER INSTRUMENTS, INC. | www.dwyer-inst.com9

AIR METER/DRAFT GAGEA Low-Cost, Direct Reading Instrument Used for Air Velocity & Static Pressure Tests

MODEL 460

AIR VELOCITY METERSSERIES 400

®

CATALOG PAGE 33

CATALOG PAGE 33

CATALOG PAGE 34

STAINLESS STEEL PITOT TUBESASME Design Meets AMCA and ASHRAE Codes

SERIES 160

MODEL CHART - WITH COMBINATION INCLINED/VERTICAL SCALES*

ModelRangein w.c.

VelocityFPM

Minor Div.; Range in w.c. PitotTube PriceInclined Vertical

400-10-Kit 400-10-Gage

0 to 100 to 10

400 to 12600400 to 12600

.01, 0 to 1.0

.01, 0 to 1.0.10, 1 to 10.10, 1 to 10

18 inNone

$1233.00897.00

*Rated for total pressures to 100 psig (6.89 bar); temperatures to 150°F (65°C)

MODEL CHARTModel Description Price460 Air meter, complete kit $44.25

ACCESSORIESModel Description PriceA-378A-379A-380A-381

Tube of 3 replacement floatsSupply grille probeReturn grille probeCleaning kit including 1 anti-static chemically treated pipe stem cleaner and nylon high range orifice cleaner

$12.008.109.305.10

MODEL CHARTStandard 5/16˝ Diameter Model

Insertion Length Price

Longer Length with Stiffener Model

Insertion Length Price

160-8160-12160-18160-24160-36160-48160-60

8-5/8˝12-5/8˝18-5/8˝24-5/8˝36-5/8˝48-5/8˝60-5/8˝

$76.5078.5084.0087.50

100.00102.00136.00

160-96 96˝ $398.00Pocket Size 1/8˝ Diameter Model

Insertion Length Price

166-6166-12167-6167-12

6˝12˝6˝12˝

$85.5088.0085.5088.00

Model Description Price160-KIT Kit containing 160-18, 160-24, 160-36, 160-48, and

carrying case$373.00

ACCESSORIESModel Description PriceA-156A-158

A-159

A-160-CASEA-397

Flange mounting plate 1/2˝ female NPTSplit flange mounting. Can be added to any Dwyer® No. 160 standard pitot tube. Cadmium plated steel. Gasket is pattern for mounting holes. Secure flange loosely to tube, adjust tube depth and tighten screws. Gasket of 1/16˝ Neoprene fits tightly around tube and against duct for leak-proof seal. Nuts, washers included.Mounting gland. Versatile adapter slips on any Series 160, 5/16˝ standard pitot tube made after Dec. 1990. Two-part stainless steel fitting slides over tube and provides permanent, secure mounting. Where duct interior is accessible, use the washers and jam nut supplied. For blind applications or in thicker materials, use model A-156 flange mounting plate. Once tube is adjusted to proper depth and angle, tighten smaller hex bushing to lock position. Graphite bushing inside assures leak-proof seal even at higher temperatures. TFE bushing also available. Note: For full insertion with this fitting, order next longer pitot tube. A-159 mounting gland is used for both duct mounting and flange mounting.Carrying case for pitot tubes up to 48˝Step drill. For fast, convenient installation of pitot tubes in sheet metal ducts. No center punch needed; automatic de-burring. Drills six sizes from 3/16˝-1/2˝ in 1/16˝ increments.

$16.2513.75

28.00

171.0055.00

OPTIONSTo order add suffix: Description Price-CF 1/8˝ male NPT compression fitting, mounting option

for Series 166/167+$11.75

Example: 166-6-CF

Page 11: HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES · HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES PB-CT-HVAC THESE PRICES EFFECTIVE NOVEMBER 1, 2018 ... or if the instrument or equipment

10DWYER INSTRUMENTS, INC. | www.dwyer-inst.com

STRAIGHT STAINLESS STEEL PITOT TUBES

®

MODEL 160F CATALOG PAGE 35

CATALOG PAGE 35

CATALOG PAGE 36

CATALOG PAGE 36

CATALOG PAGE 37

ELLIPSOIDAL TIP PITOT TUBEDesigned to Meet ISO Standard 3966

MODEL 160E

“S” TYPE STAINLESS STEEL PITOT TUBESLarge, Open Tip Design Resists Fouling; Optional Permanent Mount Models

SERIES 160S

TELESCOPING STAINLESS STEEL PITOT TUBEAdjustable Design Extends Insertion Length to 36 Inches

MODEL 166T

AVERAGING AIR FLOW GRIDExtends Over 50˝ to Aid in Air Flow Output Checks

MODEL 160G

ACCESSORIESModel Description PriceA-156A-158A-159A-160-CASEA-397

Flange mounting plate 1/2˝ female NPTSplit flangeMounting glandCarrying case for pitot tubes up to 48˝Step drill

$16.2513.7528.00

171.0055.00

MODEL CHARTModel Probe Length Price Model Description Price160F160F-24160F-36160F-48160F-60

18˝ (457.2 mm)24˝ (609.6 mm)36˝ (914.4 mm)48˝ (1219.2 mm)60˝ (1524 mm)

$168.00196.00253.00280.00335.00

160F-KIT Kit containing 160-18, 160-24, 160-36, 160-48, and carrying case

$948.00

MODEL CHARTModel Insertion in Meters Price160E-00160E-01160E-02160E-03160E-04160E-05160E-06

0.20.30.480.81.01.221.52

$146.00148.00152.00155.00161.00169.00175.00

ACCESSORIESModel Description PriceA-160-CASE Carrying case

for pitot tubes up to 1.22 m

$171.00

ACCESSORIESModel Description PriceA-160-CASE Carrying case for pitot tubes up to 48˝ $171.00

MODEL CHART

ModelInsertion in Inches Price

Perm. Mtg.Model

Insertion in Inches Price

160S-18160S-24160S-36160S-48160S-60160S-72

182436486072

$190.00190.00196.00209.00233.00256.00

160S-18PM160S-24PM160S-36PM

182436

$500.00523.00591.00

Note: Permanent Mounting (PM) models include 1 inch dia. welded stainless steel sleeve and adjustable compression fitting with 1 inch male NPT mounting treads. Adjust depth, lock in place.

MODEL CHARTModel Description Price166T Telescoping pitot tube $201.00

MODEL CHARTModel Description Price160G Averaging air flow grid $205.00

ACCESSORIESModel Description PriceUHH-C2 Protective hard case $227.00

Page 12: HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES · HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES PB-CT-HVAC THESE PRICES EFFECTIVE NOVEMBER 1, 2018 ... or if the instrument or equipment

DWYER INSTRUMENTS, INC. | www.dwyer-inst.com11

DIFFERENTIAL PRESSURE ANEMOMETER Bi-Directional Anemometer, No Sensing Electronics

MODEL ANE-1®

CATALOG PAGE 37

CATALOG PAGE 38

CATALOG PAGE 38

CATALOG PAGE 39

CATALOG PAGE 39

CATALOG PAGE 40

VANEOMETER™ SWING VANE ANEMOMETER Use This Sensitive Dwyer Unit to Measure Low Air Velocities – at Low Cost

MODEL 480

WIND SPEED INDICATORSERIES MARK II

PORTABLE WIND METERSERIES WIND METER

POCKET WIND METERMeasures Wind Speed and Temperature, Wide Range

MODEL MW-1

MINIATURE VANE THERMO-ANEMOMETERTelescoping Probe Measures Air Velocity, Air Volume, Temperature, and Humidity

MODEL VT-300

MODEL CHARTModel Description PriceANE-1 Differential pressure anemometer $324.00

MODEL CHARTModel Description Price480M480

25 to 400 FPM0 to 2.0 m/s

$35.2537.00

MODEL CHARTModel Scale PriceMark II WSIMark II WSI Metric

mphkph

$138.00138.00

ACCESSORIESModel Description PriceA-376 Replacement floats for

windmeter, tube of 3$12.00

MODEL CHARTModel Scale PriceWind Meter-MPHWind Meter-KNOTWind Meter-KPHWind Meter-MPS

mphknotskphmps

$30.7530.7530.7530.75

MODEL CHARTModel Description PriceMW-1 Hand-held, mini-vane thermo-anemometer $51.00

ACCESSORIESModel Description PriceA-166 Replacement vane for MW-1 $1.20

ACCESSORIESModel Description PriceA-VT300-PA-551

Replacement probe with miniature vaneReplacement probe with large vane

$197.0062.00

MODEL CHARTModel Description PriceVT-300 Miniature vane thermo-anemometer $390.00

ACCESSORIESModel Description PriceA-390 Extra vanes, pkg. of 2 $12.00

Page 13: HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES · HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES PB-CT-HVAC THESE PRICES EFFECTIVE NOVEMBER 1, 2018 ... or if the instrument or equipment

12DWYER INSTRUMENTS, INC. | www.dwyer-inst.com

DUAL INPUT THERMOCOUPLE THERMOMETER Accepts J, K, T Thermocouples, Differential Temperature Indication

MODEL 472A-1®

HANDHELD CO/CO2 GAS ANALYZERMeasures Indoor Air Quality, Includes Sampling Probe with Hose

MODEL 1205B

CATALOG PAGE 41

CATALOG PAGE 42

CATALOG PAGE 42

CATALOG PAGE 43

CATALOG PAGE 43

HANDHELD FLUE GAS COMBUSTION ANALYZERRotary Dial Selection, Display 4 Parameters Simultaneously

MODEL 1207A

GAS PRESSURE TEST KITConvenient Kit Perfect For Testing LP and Natural Gas Controls

SERIES LPTK

PORTABLE DIGITAL TACHOMETERContact or Photo Non-Contact Operation, Backlit LCD

MODEL TAC-L

OPTIONSUse order code: Description PriceNISTCAL-TG NIST traceable calibration certificate $100.00nn Items are net priced and are not subject to any discount.

MODEL CHARTModel Description Price472A-1 Digital Input Thermocouple Thermometer $90.50

HANDHELD THERMOCOUPLESModel Description T/C Type Price1718-00011718-0002

1718-00141718-0015

General Purpose Probe: Featuring a built-in handle with coiled cord and mini-plug, this general purpose probe can be used in liquids and air compatible gases. For use to 800°F.Penetration Probe: Featuring a built-in handle with coiled cord and mini-plug, this probe is used for penetrating meat, plastic, rubber, asphalt, or other semi-soft materials.

JK

JK

$121.00b121.00b

98.50b94.00b

b Items are subject to Schedule B discounts.

ACCESSORIESModel Description Price472A-B 1818-00741818-00781818-00821818-00851718-0077

Rubber bootImmersion probe Penetration probe Surface probe Air duct probe Remote probe handler

$7.1040.25b51.00b

116.00b88.50b83.00b

b Items are subject to Schedule B discounts.

MODEL CHARTModel Description Price1205B-0 Gas analyzer and logger for CO and CO2 $1405.00

ACCESSORIESModel Description Price1205B-US1205B-EU1205B-PR

120 VAC power adapter for 1205B 240 VAC power adapter for 1205B Replacement probe for 1205B

$103.00107.00123.00

MODEL CHARTModel Description Price1207A Handheld flue gas combustion analyzer $1353.00

ACCESSORIESModel Description Price1207A-US1207A-EU1207A-SP1207A-PP1207A-RF

120 VAC power adapter230 VAC power adapterSerial printerPrinter paper for 1207A-SPReplacement filter

$88.5088.50

634.0054.5057.50

MODEL CHARTModel Range PriceLPTK-01LPTK-02LPTK-03LPTK-04

0 to 15 in w.c. & 0 to 8.6 oz/in2

0 to 32 in w.c. & 0 to 18.5 oz/in2

0 to 4 kPa & 0 to 40 mbar0 to 8 kPa & 0 to 80 mbar

$37.7537.7536.7537.75

Note: Consult factory for other range options.

MODEL CHARTModel Description PriceTAC-L Contact/non-contact digital tachometer $83.50

ACCESSORIESModel Description PriceTAC-5 Reflective tape, 5´ (1.5 m) roll, 1/2˝ (13 mm) wide $26.50

Page 14: HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES · HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES PB-CT-HVAC THESE PRICES EFFECTIVE NOVEMBER 1, 2018 ... or if the instrument or equipment

DWYER INSTRUMENTS, INC. | www.dwyer-inst.com13

CURRENT/VOLTAGE SIGNAL GENERATORRamp Function, Large Numeric LCD Display

ANALOG SIGNAL GENERATORRamp Function, Bar Graph LED, Selectable Auto Shut Off

MODEL CSG®

MODEL ASG

CATALOG PAGE 44

CATALOG PAGE 44

CATALOG PAGE 45

CATALOG PAGE 45

CATALOG PAGE 45

CATALOG PAGE 45

CATALOG PAGE 46

HAND PUMPGenerates Pressures up to 45 psig (3 bar), Single Hand Operation

MODEL HP

CALIBRATION PUMPGenerates up to 72 psig, Integral Bleed Fitting

ASPIRATOR BULBSingle Hand Operation, Vacuum or Pressure

MODEL A-396A

MODEL A-350

PNEUMATIC CALIBRATION HAND PUMP Generates up to 600 psi (40 bar), Comfort Grip Handles

SERIES PCHP

PNEUMATIC HAND PUMPVacuum or Pressure, Ranges up to 100 psig

SERIES CHP

MODEL CHARTModel Description PriceCSG Current/voltage signal generator $200.00

MODEL CHARTModel Description PriceASG Analog signal generator $197.00

MODEL CHARTModel Description PriceHP Hand pump $796.00

ACCESSORIESModel Description PriceHP-1KHP-1C

Service kitHard case

$148.00277.00

MODEL CHARTModel Description PriceA-396A Calibration pump $354.00bb Items are subject to Schedule B discounts.

MODEL CHARTModel Description PriceA-350 Aspirator bulb $15.25

MODEL CHARTModel Description PriceCHP-PCHP-V

Pressure calibration pumpVacuum calibration pump

$533.00533.00

ACCESSORIESModel Description PriceCHP-KIT 2´ hose and NPT fitting $68.50

MODEL CHARTModel Description PricePCHP-1PCHP-1K

Pneumatic calibration hand pumpPneumatic calibration hand pump with hose kit

$955.001142.00

ACCESSORIESModel Description PricePCHP-HK High pressure hose $113.00

Page 15: HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES · HVAC TEST & BALANCING EQUIPMENT CATALOG PRICES PB-CT-HVAC THESE PRICES EFFECTIVE NOVEMBER 1, 2018 ... or if the instrument or equipment

14DWYER INSTRUMENTS, INC. | www.dwyer-inst.com

HYDRAULIC CALIBRATION HAND PUMP Triple Filtration, Generates Pressure up to 10,000 psi (700 bar)

SERIES HCHP®

CATALOG PAGE 46

CATALOG PAGE 47

CATALOG PAGE 47

LOW PRESSURE CALIBRATION PUMPHigh Resolution for Calibrating Low Pressure Gages and Transmitters

MODEL LPCP

LOW PRESSURE CALIBRATION PUMPVacuum or Pressure, Generates up to 870 psi (60 bar)

SERIES BCHP

MODEL CHARTModel Description PriceHCHP-1HCHP-1K

Calibration hand pumpCalibration hand pump with hose kit

$1377.001636.00

ACCESSORIESModel Description PriceHCHP-1F Spare washer and filter kit $32.25

MODEL CHARTModel Description PriceLPCP-2 Low pressure calibration pump $1360.00

ACCESSORIESModel Description PriceA-113A Fitting kit. Includes (1) 1/4˝ NPT to 1/8˝ quick connect fitting, (1) 1/4˝

NPT to hose barb fitting, (1) hose barb fitting to 1/8˝ quick connect fitting, (2) 19.7˝ (0.5 m) length of blue 1/8˝ O.D. tubing, (2) 12˝ (0.3 m) length of clear 1/4˝ O.D. tubing

$77.00

MODEL CHARTModel Description PriceBCHP-1BCHP-KIT

Calibration test pumpTest pump with 1/4˝ NPT connections, fine volume adjustment tool and case

$761.001140.00

ACCESSORIESModel Description PriceA-BCHP-CASEA-BCHP-NPT

A-BCHP-VAT

Case for BCHP-11/4˝ BSP to 1/8˝ NPT, 1/4˝ NPT, 3/8˝ NPT and 1/2˝ NPT converter set for test connectionFine volume adjustment tool

$180.00125.00

54.50