Husqvarna Product Catalogue 2010 - US

2010HUSQVARNA PRODUCT RANGE

Our reputation is based on your knowledge, understanding and needs.

Chain saws 6

Brushcutters / TrimmersClearing saws / Edgers 24

Hedge trimmers 44

Blowers 54

Power cutters 62

Zero-turn mowers / Riders 72

Garden tractors 92

Turf care 106

Lawnmowers / Robotic lawnmowers 118

Cultivators / Tillers 144

Snow throwers / Generators / Pressure washers / HUVs 154

Over 300 years of experience has taught us that our customers have the best understanding and working knowledge of outdoor power equipment. That’s why we take notice of what you have to say. Your expectations have been instrumental in shaping our unique history and our products. As a result, we have gained a reputation for not only delivering superior power and performance, but also providing our customers with the world’s most extensive range of expert outdoor power products.

Husqvarna conducts continuous product development and reserves the right to change designs, specifications and equipment levels without prior notification. All products with moving parts can be dangerous if used improperly. Always read the instructions carefully. Equipment and performance can vary from market to market. Ask your dealer about available equipment and performance in your market. All technical data was current at time of printing. However such data is subject to change due to product development. We cannot accept responsibility for printing errors.

4

With every Husqvarna product you purchase comes a team of people.

5

Choosing the right Husqvarna product is an important decision. And when you turn to Husqvarna to assist you in your work, we would like to stay with you and support you in all your efforts. The Husqvarna website gives in depth information on our full range of products, accessories and protective clothing — as well as the latest product news, tips and other useful information. There’s also our servicing dealers who will give you expert assistance, when you need advice and when you need servicing or repair. In fact, here at Husqvarna there are many people, all working to provide the performance, the results and support you demand.

www.husqvarna.com

6

50 years in the chain saw business and not a day goes by when we don’t think of you.

7

Why should you listen to us talk about power, efficiency and durability? Because we’ve listened to you. In fact, we have been listening for more than 50 years. You’ve told us that you’re looking for the best performance, results and experience. You’ve also told us that when you do a job, you want to do it well and be proud of the results. So here at Husqvarna, we work hard to put the best solution in your hands. From high-end power chain saws to smaller, lightweight ones, every Husqvarna chain saw delivers high performance, durability and effectiveness. This means real benefits for your working environment and productivity — whatever the job, and whatever the working conditions.

WORKING FOR THE BEST SOLUTION

8

Effi ciency.Over the years our engines have become easier to start. Smart Start® enables the machines to start quickly with minimum effort. Our engines have high power output even under heavy load and lower rpm's. And the power to weight ratio has increased, providing higher cutting capacity.

Ergonomics.Excellent ergonomics and power-to-weight ratio make for easier handling. The Husqvarna Low Vib® system absorbs vibrations. The angled front handle, the distance between the handles, the slim saw body, plus low weight and high center of gravity makes our saws easy to operate and reduce fatigue.

Performance.AutoTune™ gives optimal engine performance through automatic engine adjustment. It compensates for different fuels, altitude, humidity, temperature and clogged air fi lter. Air Injection™ removes larger dust and debris particles before reaching the air fi lter to improve engine life.

Effective vibration dampening reduces operator fatigue.

X-Torq® engines provide maximum power even at lower rpms.

Side-mounted chain tensioner for fast and easy adjustment.

TrioBrake™ chain brake system. A third way to activate the chain brake.

Features shown are available on select models.

9

Environment.Fuel-effi cient engines provide signifi cantly lower emissions. With our X-Torq® engine technology, fuel consumption is reduced by up to 20 % and emissions by up to 60 % while increasing power. Biodegradable vegetable based chain oil is also available.

Safety.The chain brake helps stop the chain in the event of a kickback. The brake is usually activated by the inertia forces and by the left hand. For extra protection, we have developed the TrioBrake™ system that can also be activated by the right hand.

Durability.The Husqvarna three-piece crankshaft, forged in two halves then connected with the crankpin, is designed to provide extreme durability and long service life. The crankcase on our professional saws is made of magnesium, and our all-purpose and residential saws of composite material with metal inserts.

THE BEST PERFORMANCE FOR YOU

Latest ergonomics include easier maneuverability.

Smart Start® ensures quick starts with minimum effort.

www.husqvarna.com

10

Husqvarna XP® chain saws. Professional. Powerful. Precise.Our most advanced chain saws for those users who require top end performance. Developed and tested in collaboration with the most demanding professional users, our XP ® chain saws are built with exacting demands in terms of professional performance, comfort and ergonomics. High-power, low weight, slim body and high center of gravity make them both powerful and easy

to maneuver. These saws are fully loaded with features including Air Injection™, Smart Start® and Low Vib®. AutoTune™ automatically controls the flow of fuel to the engine to optimize performance. Fuel consumption and emissions are reduced thanks to the unique X-Torq® engine technology. The result is better productivity and a job well done.

THE ULTIMATE IN PERFORMANCE

These high-performance, powerful professional chain saws reflect the requirements of the most demanding users. The XP® chain saw range offers a powerful selection for professional logging, delivering superior performance and durability when it’s required most.

Husqvarna 576 XP® / XP® G / XP® WHusqvarna 576 XP® Auto Tune™ /

XP® W Auto Tune™

Husqvarna 3120 XP® Husqvarna 395 XP® / XP® G / XP® W Husqvarna 390 XP® / XP® G / XP® W

TECHNICAL SPECIFICATIONS 3120 XP® 395 XP® 395 XP® G 395 XP® W 390 XP® 390 XP® G 390 XP® W 576 XP® 576 XP® G 576 XP® W 576 XP® AutoTune™

576 XP® W AutoTune™ 372 XP® 372 XP® W 357 XP® 346 XP® 346 XP® G 346 XP®

TrioBrake™

Displacement, cc 118.8 93.6 93.6 93.6 87.9 87.9 87.9 73.5 73.5 73.5 73.5 73.5 70.7 74.7 56.5 50.1 50.1 50.1

Power, hp / kW * 8.4 / 6.2 7.1 / 5.2 7.1 / 5.2 7.1 / 5.2 6.5 / 4.8 6.5 / 4.8 6.5 / 4.8 5.7 / 4.2 5.7 / 4.2 5.7 / 4.2 5.7 / 4.2 5.7 / 4.2 5.3 / 3.9 5.4 / 3.9 4.4 / 3.2 3.7 / 2.7 3.7 / 2.7 3.7 / 2.7

Weight excl. bar and chain, lbs 22.9 17.4 17.8 17.8 15.6 15.9 15.9 14.5 15.0 15.0 15.0 15.0 13.4 13.8 12.1 11.0 11.2 11.4

Rec. bar length, inches 24 – 42 18 – 36 18 – 36 18 – 36 18 – 28 18 – 28 18 – 28 16 – 28 16 – 28 16 – 28 16 – 28 16 – 28 16 – 28 16 – 28 16 – 24 16 – 20 16 – 20 16 – 20

AutoTune™ ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ―

X-Torq® ― ― ― ― ― ― ― ― ― ― ― ― ―

TrioBrake™ ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ―

Air Injection™ ―

Low Vib®

E-Tech® II ― ― ― ― ― ― ― ― ― ―

Heated handles / carburetor ― / ― ― / ― / / ― / ― / / ― / ― / / ― / ― / ― ― / ― / ― / ― ― / ― / /

= Available = Optional ― = Not available * Engine power values are as rated by the engine manufacturer. Features glossary and further technical specifications on pages 20 –23.

11

THE ULTIMATE IN PERFORMANCE

Husqvarna 372 XP® / XP® W Husqvarna 357 XP® Husqvarna 346 XP® / XP® G Husqvarna 346 XP® TrioBrake™

TECHNICAL SPECIFICATIONS 3120 XP® 395 XP® 395 XP® G 395 XP® W 390 XP® 390 XP® G 390 XP® W 576 XP® 576 XP® G 576 XP® W 576 XP® AutoTune™

576 XP® W AutoTune™ 372 XP® 372 XP® W 357 XP® 346 XP® 346 XP® G 346 XP®

TrioBrake™

Displacement, cc 118.8 93.6 93.6 93.6 87.9 87.9 87.9 73.5 73.5 73.5 73.5 73.5 70.7 74.7 56.5 50.1 50.1 50.1

Power, hp / kW * 8.4 / 6.2 7.1 / 5.2 7.1 / 5.2 7.1 / 5.2 6.5 / 4.8 6.5 / 4.8 6.5 / 4.8 5.7 / 4.2 5.7 / 4.2 5.7 / 4.2 5.7 / 4.2 5.7 / 4.2 5.3 / 3.9 5.4 / 3.9 4.4 / 3.2 3.7 / 2.7 3.7 / 2.7 3.7 / 2.7

Weight excl. bar and chain, lbs 22.9 17.4 17.8 17.8 15.6 15.9 15.9 14.5 15.0 15.0 15.0 15.0 13.4 13.8 12.1 11.0 11.2 11.4

Rec. bar length, inches 24 – 42 18 – 36 18 – 36 18 – 36 18 – 28 18 – 28 18 – 28 16 – 28 16 – 28 16 – 28 16 – 28 16 – 28 16 – 28 16 – 28 16 – 24 16 – 20 16 – 20 16 – 20

AutoTune™ ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ―

X-Torq® ― ― ― ― ― ― ― ― ― ― ― ― ―

TrioBrake™ ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ―

Air Injection™ ―

Low Vib®

E-Tech® II ― ― ― ― ― ― ― ― ― ―

Heated handles / carburetor ― / ― ― / ― / / ― / ― / / ― / ― / / ― / ― / ― ― / ― / ― / ― ― / ― / /


12

Husqvarna 570 Husqvarna 359 Husqvarna 353

TECHNICAL SPECIFICATIONS 570 359 353

Displacement, cc 67.9 59.0 51.7

Power, hp / kW * 4.9 / 3.6 3.9 / 2.9 3.3 / 2.4

Weight excl. bar and chain, lbs 14.9 12.1 11.0

Rec. bar length, inches 15 – 28 13 – 24 13 – 20

X-Torq® ― ―

Air Injection™

Low Vib®

E-Tech® II


Power to cut through the toughest jobs.Our range of powerful, robust, larger chain saws is designed for the most demanding of users where the environment is hard and conditions tough. They have been developed in close cooperation with professional users. Their low weight and high power is combined with a rugged engine, making

these saws exceptionally versatile and well suited for a wide variety of applications. Delivering more power and extra durability, they are built for increased productivity without adding to the user’s work load.

HANDLING TOUGH ENVIRONMENTS

These models have enough muscle for the heaviest jobs, but at the same time they are easy to start, handle and service. Well engineered and user-friendly, they are some of the market’s largest, but at the same time, handiest machines.

13

Husqvarna 460 Rancher / 455 e-series Rancher /

455 Rancher

Husqvarna 450 e-series / 450 / 445 / 440 e-series / 435

TECHNICAL SPECIFICATIONS 460 Rancher455

e-series Rancher

455 Rancher 450 e-series 450 445 440 e-series 435

Displacement, cc 60.3 55.5 55.5 50.2 50.2 45.7 40.9 40.9

Power, hp / kW * 3.7 / 2.7 3.4 / 2.5 3.4 / 2.5 3.2 / 2.4 3.2 / 2.4 2.8 / 2.1 2.4 / 1.8 2.2 / 1.6

Weight excl. bar and chain, lbs 13.3 13.2 13.2 11.3 11.2 10.8 9.8 9.3

Rec. bar length, inches 13 – 20 13 – 20 13-20 12 – 20 12 – 20 12 – 20 12 – 20 12 – 18

X-Torq®

Air Injection™

Low Vib®

E-Tech® II

= Available * Engine power values are as rated by the engine manufacturer. Features glossary and further technical specifications on pages 20 –23.

These all-purpose chain saws are ideal for landowners and others who cut less regularly. Occasional users also demand optimal performance, easy starting, comfortable handling and superb safety. The X-Torq® engines deliver maximum power and torque over a wider rpm range, while reducing emissions and fuel consumption.The e-series models are

especially easy to handle thanks to the spring-assisted starter and tool-less chain tensioning features. The 455 is an ideal saw for landowners who require a high powered, heavy-duty and responsive chain saw for all cutting conditions. It combines technology and ergonomics.

This range of chain saws offers all-round versatility for landowners who require performance, for occasional projects. Reliability is the top concern here. When a job comes up, you need a chain saw that is ready for action.

Chain saws with the strength you need, whenever you need it.

WORKING WITH GENERAL NEEDS

14

TECHNICAL SPECIFICATIONS 240 e-series 235 e-series 235


Power, hp / kW * 2.0 / 1.5 1.8 / 1.3 1.8 / 1.3

Weight excl. bar and chain, lbs 10.3 10.3 10.3

Rec. bar length, inches 12 – 16 12 – 16 12 – 16

X-Torq®

Air Injection™

Low Vib®


Lightweight, easy to handle and above all, reliable — these chain saws are ideal for lighter jobs around the home and garden. With their powerful engines, they are still a pleasure to work with.

No matter how big the job, why should you settle for less?When cutting firewood and doing other light-duty jobs, why should you have to settle for an inferior chain saw? These models deliver outstanding cutting performance, great technological features and they are easy to handle, no matter the job, and no matter how often you use them.These easy to maneuver saws are dependable and suited

for all-round use. They are ideal for smaller jobs, such as pruning, lighter cutting tasks and home use. They are easy to start and operate thanks to their ergonomic design, advanced technology and powerful X-Torq® engines with low emissions.

ALL-AROUND SAWS

15

Professional tree care takes time and energy. These arborist chain saws have been ergonomically designed specifically for tree work where space is tight and sometimes tricky. Features such as reduced vibration allow for comfortable use and longer work time.

For arborists who need a professional tree care chain saw.Professional tree care requires a chain saw with a difference. It must have enough power to do its job but at the same time, be light, safe and easy to maneuver. With a light, slim, optimized body, our tree care saws are exclusively designed for tree care professionals and arborists. Their physical characteristics mean that they can be used with ease between tight branches and in those

difficult to reach places. This alone would normally put the user under enormous strain. But our tree saws offer not only greater maneuverability, they also feature Low Vib® and a vibration dampened carburetor, which allows the user to work longer with less physical strain. Stable hosting ring for rope attachment allows lowering of a saw for easier handling.

PROFESSIONAL TREE CARE

Husqvarna 339 XP® Husqvarna 338 XP® T

TECHNICAL SPECIFICATIONS 339 XP® 338 XP® T

Displacement, cc 39.0 39.0

Power, hp / kW * 2.4 / 1.8 2.3 / 1.7

Weight excl. bar and chain, lbs 8.8 7.7

Rec. bar length, inches 12 – 18 12 – 16

Air Injection™

Low Vib®


16

TECHNICAL SPECIFICATIONS T435

Displacement, cc 35.2

Power, hp / kW * 2.0 / 1.5

Weight excl. bar and chain, lbs 7.5

Rec. bar length, inches 12 – 14

X-Torq®

Low Vib®


The low weight of this powerful tree care chain saw makes it an ideal choice for use where weight and balance could be the issue. Light weight with excellent balance, it is well suited for farms and gardens alike.

Low weight powerful tree care chain saw.Our new T435 tree care saw is very easy to handle thanks to its well-balanced body and high power-to-weight ratio. The low weight and slim design make it perfect to operate from a sky lift. Features include Low Vib® and a vibration-dampening carburetor to reduce strain and enable the user to work longer.

The T435 is equipped with X-Torq® engine technology, which increases power at lower rpms, with less emissions and fuel consumption. Smart Start® allows this saw to start with minimum effort – quite a benefit when working in heights. Perforated right hand guard allows better operation overview.

GENERAL ALL-PURPOSE TREE CARE

17

TECHNICAL SPECIFICATIONS 316 ELECTRIC

Voltage, V 120

Output, W 1600

Equivalent vibration level (a hv , eq) front / rear handle, m /s² * 4.4 / 5.4

Weight excl. bar and chain, lbs 9.7

Chain pitch, inches 3 / 8

Recommended bar length, inches 14 – 16

Inertia-activated chain brake **

Chain catcher

Electronic overload protection ―

Window for oil level

= Available ― = Not available *Equivalent vibration level, according to ISO 22867, calculated as the time-weighted energy total for vibration levels at different operating conditions. Reported data for equivalent vibration level has a typical measurement of dispersion (standard deviation) of 1.0 m /s². ** Features glossary on pages 20–21.

Even jobs around the home can require a chain saw that provides performance and safety, with minimum disturbance to the neighbors. This versatile electric chain saw can perform under the most demanding situations and also in lighter work, such as carpentry or chopping firewood.

A powerful, quiet electric saw for firewood cutting, carpentry and garden care.Our electric chain saw offers many advantages. It is quieter, emission-free and ideal for lighter cutting, trimming and carpentry. In addition, it can be used both indoors and out. The professional 316 electric saw with high torque and power offers performance for the most demanding projects. Highly developed ergonomics and a slim body,

make this saw exceptionally easy to use. Electronic overload cut-out protects the motor in the event that the chain jams. Stop time below one second provides maximum safety. This electric chain saw delivers all this, plus the usual high standards of performance and job satisfaction.

GENERAL PURPOSE ELECTRIC SAW

18

TECHNICAL SPECIFICATIONS 327P5x 327P4


Power, hp / kW * 1.2 / 0.9 1.2 / 0.9

Sound pressure level at operators ear, dB(A) ** 86 / 86 95 / 95

Guaranteed sound power level, L WA dB(A) 105 105

Equivalent vibration level (a hv , eq) left / right handle, m /s²*** 3.4 / 1.9 2.9 / 2.8

Weight excl. bar and chain, lbs 14.1 13.4

Total length, inches 137.8 94.5

E-Tech® II

Smart Start ****

Rear impact guard ―

Auto return stop switch ****

Fuel pump **

Two-piece shaft ―

Vibration-dampened cutter head

Adjustable chain tensioner, no tools required

Adjustable, automatic oil pump *****

Balance Flex™ harness

= Available = Optional ― = Not available * Engine power values are as rated by the engine manufacturer. ** Equivalent sound pressure level, as per ISO 22868, is calculated as the time-weighted energy sum for the sound pressure levels at various operational states. Typical variation for equivalent sound pressure level is a standard deviation of 1.0 dB(A). *** Equivalent vibration level, as per ISO 22867, is calculated as the time-weighted energy sum for the vibration levels at various operational states. The data presented for equivalent vibration level has a typical variation (standard deviation) of 1.0 m/s². ****Features glossary 41. ***** Features glossary 20–21.

Our pole saws make it easy to reach high into even the densest of trees and bushes without using a ladder or lift. If you have the need, they have the reach.

Reach greater profitability with our professional pole saws.Reach, balance and performance for professional tree care is achieved through smart technological solutions, outstanding ergonomics and high durability. The Husqvarna 327P5x features a detachable shaft that facilitates easy transport and storage, together with the new innovative Balance Flex ™ harness. The vibration-dampened, compact cutting head

offers superior performance for work in dense vegetation. The location of the engine provides good balance and a comfortable working position, while directing the exhaust fumes away from the user. The rear-impact guard protects the engine from wear and damage.

GREATER REACH FOR TREE CARE

Husqvarna’s two-stroke oils are engineered to optimize performance. Pro Forest Bar & Chain Oil is a vegetable based, biodegradeable oil.

19

ACCESSORIES TO KEEP UP THE PERFORMANCE

We have a large selection of accessories available to reduce downtime and make sure you get the best performance every time.Genuine Husqvarna equipment and chain saw accessories are built to the same high standards as our saws. By com-bining high quality materials and basing development on

our customers demands, we are able to offer a wide range of guide bars, chains and files that deliver maximum efficiency and safety when added to any chain saw.

Choosing the right blade and chain optimizes the saw’s performance, increasing its capacity and control.

Our complete tool belt features two holsters, lifting hook, lifting tong, rear tool carrier and measuring tape.

Our range of safety helmets come complete with hearing

protection and visors.

Reinforced, water resistant and comfortable,

our protective clothing gives the right protection

no matter what job you have in mind.

Our light, comfortable and protective boots come in a range of various styles, including protective rubber boots, for demanding forestry and green care work. The boots are developed and tested in close cooperation with professional users.

Visit the Husqvarna web page for our full range of accessories. Here you’ll find advice on which parts and accessories are right for your machines. You’ll also find a range of professional work and safety wear designed with your job in mind.

www.husqvarna.com

20

X-Torq®.Our patented, industry-leading, 2-stroke X-Torq® engine technology gives you more power where you need it, but with up to 20 % less fuel consumption and up to 60 % less emissions, when compared to a standard 2 stroke engine. It’s technology that works for you and the environment.

Low Vib®.Effective anti-vibration dampeners absorb vibration, reducing fatigue on the user’s arms and hands.

AutoTune™.Always optimal engine performance throughout a digital steered carburetor. AutoTune™ compensates for different fuels, altitude, humidity, temperature and even a clogged air fi lter.

Inertia-activated chain brake.If a kickback occurs and the tip of the bar is forced upwards, the inertia of the front guard activates the chain brake instantly.

TrioBrake™.TrioBrake™ is a unique feature that allows the chain brake to be activated either automatically by the inertia release mechanism or mechanically by your left or right hand. This will help you work safer, easier, more effi ciently and in a more ergonomic fashion, with less strain on the body.

Air Injection™.This centrifugal air cleaning system reduces wear and ensures longer operating time between fi lter cleanings.

The Husqvarna chain saw features glossary.

TECHNICAL FEATURES

21

Smart Start® decompression valve.The engine and starter have been designed so the machine starts quickly with minimum effort.

Smart Start® spring assisted start.When pulling the starter cord, a special spring reduces the resistance in the starter cord by up to 40 %.

e-series.A series of chain saws equipped with features such as spring -assisted starter, for easy starts with less effort. Other features include quick and easy chain tensioning and tool-less bar and chain assembly.

Starting reminder.A decal placed on the top cover reminds you of the correct starting sequence for easy starts.

E-Tech® II.The E-Tech® engine represents the latest developments in low emission engine technology while provideing a superior power / weight ratio.

Combined choke / stop control.Combined choke / stop control allows for easier starting and reduces the risk of engine fl ooding.

Quick release air fi lter cover.Makes it easy to access the air fi lter and spark plug quickly for cleaning or replacement. A valuable advantage, especially if the saw is used for long periods on a daily basis.

Quick release air fi lter.Makes it easy to remove the air fi lter for cleaning or replacement. No tools required.

Visible fuel level.Makes it easy for the user to see when fuel is needed.

Vibration-dampened carburetor.Allows the engine to run smoother, with less need for adjustments.

Snap-lock cylinder cover.Saves time when changing spark plugs and cleaning.

Adjustable oil pump.An adjustable oil pump provides the bar and chain the right amount of lubrication for every task.

Side-mounted chain tensioner.Side-mounted chain tensioner makes chain adjustment quick and easy.

Tool-less chain tensioner.Quick and easy chain tensioning and assembling of the bar and chain without using any tools.

Heated handles.Effi cient heating coils in the front and rear handles make the saw more comfortable to use in cold and damp conditions.

TECHNICAL FEATURES

Heated carburetor.A heated carburetor allows the engine to start easier and run smoother in cold working environments.

Integrated loop for rope.A sturdy point for fastening a rope, making it easy to hoist the chain saw up into a tree.

www.husqvarna.com

TIPS BEFORE BUYING

What to consider before making your choice.The first question is whether the chain saw you need will be used professionally or privately. This will determine which type and size of chain saw you should choose.

Weight and engine size. Don’t choose too small an engine: ■

more power gets the job done faster, even if you’re “just” sawing wood.

Size and hardness of the wood. Select a bar length based ■

on the size of the trees. The stronger the engine, the longer the bar you can combine it with.

Good ergonomics are just as important as low weight. ■ Low vibration levels in the handle, a slim, well balanced saw body and a high center of gravity are welcome features.

Safety first. ■ Efficient kickback protection is a requirement in most countries. Replacing a chain catcher stud that has been broken off should be easy.

When working in cold conditions, heated handles makes ■

work more efficient and comfortable.

Visit the Husqvarna web page for our full range of chain products and accessories. Here you’ll find additional advice to help you decide which chainsaw is right for the job you have in mind. For more information regarding your purchase, contact your Husqvarna servicing dealer.

22

TECHNICAL SPECIFICATIONS

3120 XP® 395 XP® / XP® GXP® W

390 XP® / XP® GXP® W


576 XP® AutoTune™/ XP® W AutoTune™ 372 XP® / XP® W 357 XP® 346 XP® / XP® G 346 XP®

TrioBrake™ 570 359 353 460 Rancher

Displacement, cc 118.8 93.6 87.9 73.5 73.5 70.7 56.5 50.1 50.1 67.9 59.0 51.7 60.3Power, hp / kW * 8.4 / 6.2 7.1 / 5.2 6.5 / 4.8 5.7 / 4.2 5.7 / 4.2 5.3 / 3.9 4.4 / 3.2 3.7 / 2.7 3.7 / 2.7 4.9 / 3.6 3.9 / 2.9 3.3 / 2.4 3.7 / 2.7Sound pressure level at operator’s ear, dB(A) ** 101 102 105 105 105 104 101 103 103 107 101 102 104Equivalent vibration level (a hv , eq) front / rear handle, m /s² *** 7.7 / 10.6 6.5 / 10.2 5.8 / 7.0 2.9 / 3.6 2.9 / 3.6 3.5 / 4.0 3.9 / 4.2 2.4 / 3.6 2.4 / 3.6 3.2 / 3.4 3.9 / 4.2 3.1 / 3.2 4.9 / 4.3Weight excl. bar and chain, lbs 22.9 17.4 / 17.8 / 17.8 15.6 / 15.9 / 15.9 14.5 / 15.0 / 15.0 14.5 / 15.0 / 15.0 13.4 / 13.8 12.1 11.0 / 11.2 11.4 14.9 12.1 11.0 13.3Chain pitch, inches .404 3 / 8 / .404 3 / 8 3 / 8 3 / 8 3 / 8 .325 / 3 / 8 .325 .325 3 / 8 .325 / 3 / 8 .325 .325 / 3 / 8Rec. bar length, inches 24 – 42 18 – 36 18 – 28 16 – 28 16 – 28 16 – 28 16–24 16 – 20 16 – 20 15 – 28 13 – 24 13 – 20 13 – 20Inertia-activated chain brakeAutoTune™ ― ― ― ― ― ― ― ― ― ― ― ―TrioBrake™ ― ― ― ― ― ― ― ― ― ― ― ―Air Injection™ ―X-Torq® ― ― ― ― – ― ― ― ―Low Vib®

Smart Start® decompression valve **** ****Smart Start® spring assisted start ― ― ― ― ― ― – ― ― ― ― ― ―Fuel Pump ― ― ― ― ― ― – ― ―Starting reminder ― ― ― ― ― ― – ― ― ― ― ― ―E-Tech® II ― ― ― ― ― ― ―Combined choke / stop control ― ― ― ―Quick release air fi lter cover ― ― ― ― ― ― ― ― ―Quick release air fi lter ― ―Visible fuel level ― ― ― ― ― ― – ― ― ― ― ― ―Vibration-dampened carburetor ―Snap-lock cylinder cover ― ― ― ― ―Adjustable oil pumpSide-mounted chain tensioner ― ―Tool-less chain tensioner ― ― ― ― ― ― – ― ― ― ― ― ―Heated handles ― ― / / ― / / ― / / ― / ― / ― ― / ― ― ― ― ―Heated carburetor ― ― / / ― / / ― / / ― / ― / ― / ― ― ―Integrated loop for rope ― ― ― ― ― ― – ― ― ― ― ― ―

455 e-series Rancher 455 Rancher 450 e-series 450 445 440 e-series 435 240 e-series 235 e-series 235 339 XP® 338 XP® T T435

Displacement, cc 55.5 55.5 50.2 50.2 45.7 40.9 40.9 38.2 34.4 34.4 39.0 39.0 35.2Power, hp / kW * 3.4 / 2.5 3.4 / 2.5 3.2 / 2.4 3.2 / 2.4 2.8 / 2.1 2.4 / 1.8 2.2 / 1.6 2.0 / 1.5 1.8 / 1.3 1.8 / 1.3 2.4 / 1.8 2.3 / 1.7 2.0 / 1.5Sound pressure level at operator’s ear, dB(A) ** 104 104 104 104 103 102 102 100.7 98.6 98.6 99 102 103Equivalent vibration level (a hv , eq) front / rear handle, m /s² *** 3.4 / 4.5 3.4 / 4.5 2.3 / 2.7 2.3 / 2.7 1.9 / 2.6 2.5 / 3.2 2.5 / 3.2 3.4 / 4.5 3.4 / 4.5 3.4 / 4.5 4.3 / 5.1 3.0 / 3.5 4.1 / 3.9Weight excl. bar and chain, lbs 13.2 13.2 11.3 11.2 10.8 9.8 9.3 10.3 10.3 10.3 8.8 7.7 7.5Chain pitch, inches .325 / 3 / 8 .325 / 3 / 8 .325 .325 .325 .325 .325 .325 / 3 / 8 .325 / 3 / 8 .325 / 3 / 8 .325 3 / 8 3 / 8Rec. bar length, inches 13 – 20 13 – 20 12 – 20 12 – 20 12 – 20 12 – 18 12 – 18 12 – 16 12 – 16 12 – 16 12 – 18 12 – 16 12 – 14Inertia-activated chain brakeAutoTune™ ― ― ― ― ― ― ― ― ― ― ― ― ―TrioBrake™ ― ― ― ― ― ― ― ― ― ― ― ― ―Air Injection™ ―X-Torq® ― ―Low Vib®

Smart Start® decompression valve ― ― ― ― ― ― Auto ―Smart Start® spring assisted start ― ― ― ― ― ― ―Fuel PumpStarting reminder ― ― ― ― ―E-Tech® II ― ― ―Combined choke / stop control ― ―Quick release air fi lter cover ― ― ― ― ― ― ― ― ― ―Quick release air fi lter ― ― ― ― ―Visible fuel level ― ― ― ― ― ― ― ―Vibration-dampened carburetor ― ― ―Snap-lock cylinder cover ― ― ― ― ― ― ― ―Adjustable oil pump ― ― ― ― ― ― ― ―Side-mounted chain tensioner ― ― ― ― ― ― ―Tool-less chain tensioner ― ― ― ― ― ― ―Heated handles ― ― ― ― ― ― ― ― ― ― ― ― ―Heated carburetor ― ― ― ― ― ― ― ― ― ― ― ― ―Integrated loop for rope ― ― ― ― ― ― ― ― ― ― ―

= Available = Optional = Available only in some markets ― = Not available * Engine power values are as rated by the engine manufacturer. **Equivalent sound pressure level, according to ISO 22868, calculated as the time-weighted energy total for the sound pressure levels at different operating conditions. Typical measurement of dispersion for the equivalent sound pressure level is a standard deviation of 1.0 dB (A). ***Equivalent vibration level, according to ISO 22867, calculated as the time-weighted energy total for vibration levels at different operating conditions. Reported data for equivalent vibration level has a typical measurement of dispersion (standard deviation) of 1.0 m /s². **** = Available with or without Smart Start decompression valve.

23


3120 XP® 395 XP® / XP® GXP® W



576 XP® AutoTune™/ XP® W AutoTune™ 372 XP® / XP® W 357 XP® 346 XP® / XP® G 346 XP®

TrioBrake™ 570 359 353 460 Rancher

Displacement, cc 118.8 93.6 87.9 73.5 73.5 70.7 56.5 50.1 50.1 67.9 59.0 51.7 60.3Power, hp / kW * 8.4 / 6.2 7.1 / 5.2 6.5 / 4.8 5.7 / 4.2 5.7 / 4.2 5.3 / 3.9 4.4 / 3.2 3.7 / 2.7 3.7 / 2.7 4.9 / 3.6 3.9 / 2.9 3.3 / 2.4 3.7 / 2.7Sound pressure level at operator’s ear, dB(A) ** 101 102 105 105 105 104 101 103 103 107 101 102 104Equivalent vibration level (a hv , eq) front / rear handle, m /s² *** 7.7 / 10.6 6.5 / 10.2 5.8 / 7.0 2.9 / 3.6 2.9 / 3.6 3.5 / 4.0 3.9 / 4.2 2.4 / 3.6 2.4 / 3.6 3.2 / 3.4 3.9 / 4.2 3.1 / 3.2 4.9 / 4.3Weight excl. bar and chain, lbs 22.9 17.4 / 17.8 / 17.8 15.6 / 15.9 / 15.9 14.5 / 15.0 / 15.0 14.5 / 15.0 / 15.0 13.4 / 13.8 12.1 11.0 / 11.2 11.4 14.9 12.1 11.0 13.3Chain pitch, inches .404 3 / 8 / .404 3 / 8 3 / 8 3 / 8 3 / 8 .325 / 3 / 8 .325 .325 3 / 8 .325 / 3 / 8 .325 .325 / 3 / 8Rec. bar length, inches 24 – 42 18 – 36 18 – 28 16 – 28 16 – 28 16 – 28 16–24 16 – 20 16 – 20 15 – 28 13 – 24 13 – 20 13 – 20Inertia-activated chain brakeAutoTune™ ― ― ― ― ― ― ― ― ― ― ― ―TrioBrake™ ― ― ― ― ― ― ― ― ― ― ― ―Air Injection™ ―X-Torq® ― ― ― ― – ― ― ― ―Low Vib®

Smart Start® decompression valve **** ****Smart Start® spring assisted start ― ― ― ― ― ― – ― ― ― ― ― ―Fuel Pump ― ― ― ― ― ― – ― ―Starting reminder ― ― ― ― ― ― – ― ― ― ― ― ―E-Tech® II ― ― ― ― ― ― ―Combined choke / stop control ― ― ― ―Quick release air fi lter cover ― ― ― ― ― ― ― ― ―Quick release air fi lter ― ―Visible fuel level ― ― ― ― ― ― – ― ― ― ― ― ―Vibration-dampened carburetor ―Snap-lock cylinder cover ― ― ― ― ―Adjustable oil pumpSide-mounted chain tensioner ― ―Tool-less chain tensioner ― ― ― ― ― ― – ― ― ― ― ― ―Heated handles ― ― / / ― / / ― / / ― / ― / ― ― / ― ― ― ― ―Heated carburetor ― ― / / ― / / ― / / ― / ― / ― / ― ― ―Integrated loop for rope ― ― ― ― ― ― – ― ― ― ― ― ―

455 e-series Rancher 455 Rancher 450 e-series 450 445 440 e-series 435 240 e-series 235 e-series 235 339 XP® 338 XP® T T435

Displacement, cc 55.5 55.5 50.2 50.2 45.7 40.9 40.9 38.2 34.4 34.4 39.0 39.0 35.2Power, hp / kW * 3.4 / 2.5 3.4 / 2.5 3.2 / 2.4 3.2 / 2.4 2.8 / 2.1 2.4 / 1.8 2.2 / 1.6 2.0 / 1.5 1.8 / 1.3 1.8 / 1.3 2.4 / 1.8 2.3 / 1.7 2.0 / 1.5Sound pressure level at operator’s ear, dB(A) ** 104 104 104 104 103 102 102 100.7 98.6 98.6 99 102 103Equivalent vibration level (a hv , eq) front / rear handle, m /s² *** 3.4 / 4.5 3.4 / 4.5 2.3 / 2.7 2.3 / 2.7 1.9 / 2.6 2.5 / 3.2 2.5 / 3.2 3.4 / 4.5 3.4 / 4.5 3.4 / 4.5 4.3 / 5.1 3.0 / 3.5 4.1 / 3.9Weight excl. bar and chain, lbs 13.2 13.2 11.3 11.2 10.8 9.8 9.3 10.3 10.3 10.3 8.8 7.7 7.5Chain pitch, inches .325 / 3 / 8 .325 / 3 / 8 .325 .325 .325 .325 .325 .325 / 3 / 8 .325 / 3 / 8 .325 / 3 / 8 .325 3 / 8 3 / 8Rec. bar length, inches 13 – 20 13 – 20 12 – 20 12 – 20 12 – 20 12 – 18 12 – 18 12 – 16 12 – 16 12 – 16 12 – 18 12 – 16 12 – 14Inertia-activated chain brakeAutoTune™ ― ― ― ― ― ― ― ― ― ― ― ― ―TrioBrake™ ― ― ― ― ― ― ― ― ― ― ― ― ―Air Injection™ ―X-Torq® ― ―Low Vib®

Smart Start® decompression valve ― ― ― ― ― ― Auto ―Smart Start® spring assisted start ― ― ― ― ― ― ―Fuel PumpStarting reminder ― ― ― ― ―E-Tech® II ― ― ―Combined choke / stop control ― ―Quick release air fi lter cover ― ― ― ― ― ― ― ― ― ―Quick release air fi lter ― ― ― ― ―Visible fuel level ― ― ― ― ― ― ― ―Vibration-dampened carburetor ― ― ―Snap-lock cylinder cover ― ― ― ― ― ― ― ―Adjustable oil pump ― ― ― ― ― ― ― ―Side-mounted chain tensioner ― ― ― ― ― ― ―Tool-less chain tensioner ― ― ― ― ― ― ―Heated handles ― ― ― ― ― ― ― ― ― ― ― ― ―Heated carburetor ― ― ― ― ― ― ― ― ― ― ― ― ―Integrated loop for rope ― ― ― ― ― ― ― ― ― ― ―

= Available = Optional = Available only in some markets ― = Not available * Engine power values are as rated by the engine manufacturer. **Equivalent sound pressure level, according to ISO 22868, calculated as the time-weighted energy total for the sound pressure levels at different operating conditions. Typical measurement of dispersion for the equivalent sound pressure level is a standard deviation of 1.0 dB (A). ***Equivalent vibration level, according to ISO 22867, calculated as the time-weighted energy total for vibration levels at different operating conditions. Reported data for equivalent vibration level has a typical measurement of dispersion (standard deviation) of 1.0 m /s². **** = Available with or without Smart Start decompression valve.

24

Big clearing jobs just got easier.

25

Trimming lawn edges, cutting grass in hard to reach places, clearing large areas of land and unwanted shrubs can be not only time consuming, but also very labor intensive. Our comprehensive range of clearing saws, brushcutters and trimmers tackle a variety of different outdoor jobs. One common characteristic they share is their ability to make work easier and give more impressive results. Our machines combine power with low weight for easy handling, increased productivity and great results. So if you’re looking for more from your working day, look no further than Husqvarna.


26

Performance.Husqvarna brushcutters offer rapid acceleration engines and high torque, along with optimized transmissions for the best cutting performance. Ideal for heavy-duty work and handling a variety of different cutting needs.

Effi ciency.Gears and blades have been designed to work together resulting in high cutting capacity. High blade speed gives greater cutting capacity, as well as easier cutting action. With Smart Start®, the engine and starter have been designed so the machine starts quickly with minimum effort. Resistance in the starter cord has been reduced by up to 40 %.

Ergonomics.Raised handlebar position and high offset post increases freedom of movement when working on slopes, while the harness distributes weight, making the machines easier to handle. Low Vib® system for low vibration levels is just one of the features that make our brushcutters ergonomically superior.

Low Vib® vibration dampening. Reduces operator fatigue.

Balance XT harness. Intelligently designed for efficient weight distribution.

Bevel gears. Specially designed to enhance performance.


27

Durability.With reliable, heavy-duty components and a durable design, these machines are tested under extreme conditions to validate top class durability and their recommended performance levels, ensuring that Husqvarna brushcutters live up to your expectations.

Environment.Our machines are environmentally well adapted. Many of our machines use our X-Torq® engines, which provide excellent performance with low fuel and low exhaust emission – reducing fuel consumption by up to 20 % and exhaust emissions by up to 60 %.

Safety.The Balance X ™ and Balance XT harnesses are equipped with an easy access safety release. With one simple maneuver, the brushcutter can be released from the harness.

X-Torq® engines. More power from less fuel.

Center balanced engines with front mounted fuel tank for easier maneuverability.

Smart Start®. Start quickly with minimal effort.


www.husqvarna.com

28

TECHNICAL SPECIFICATIONS 355Fx


Power, hp / kW * 3.8 / 2.8

Weight, excl. cutting equipment and guard, lbs 19.6

X-Torq®

Smart Start®

Harness Balance XT

= Available ― = Not available * Engine power values are as rated by the engine manufacturer. Features glossary and further technical specifications on pages 42 – 43.

THE ULTIMATE PERFORMER

An exceptionally easy to operate forestry clearing saw with high performance and unique

ergonomic solutions. This clearing saw offers high productivity and ensures lower fuel costs

– ideal for dense forest applications.

Make easy work of tough jobs.The 355Fx is a strong, maneuverable forestry clearing saw with high power, rapid acceleration, low vibrations and specially designed bevel gears for high cutting speed. The X-Torq® engine increases torque over a wider rpm range, reducing fuel consumption by up to 20 % and exhaust

emissions by up to 60 %. Smart Start® ensures the machine starts quickly, with minimal effort. Other intelligent features include an ergonomic harness and handles, angled handle-bar, as well as thumb throttle control for comfortable, accurate handling.

29

VERSATILITY FOR BIGGER JOBS

TECHNICAL SPECIFICATIONS 343FR 335FR 235FR


Power, hp / kW * 2.7 / 2.0 2.2 / 1.6 1.8 / 1.3

Weight, excl. cutting equipment and guard, lbs 18.1 13.7 16.1

Low Vib®

Smart Start® ― ―

Harness Balance X™ Balance 35 Balance 35


When time and money are an issue, this range of versatile brushcutters offers all-

round versatility for farmers, landowners and anyone looking for one machine that

can tackle a multitude of projects.

Powerful, reliable and above all, versatile.Whatever the job, these brushcutters can do it. They are ideally suited for jobs around farms and land where a wide range of tasks are part of the everyday working routine and no two jobs are the same. The FR units come completely equipped with a saw blade for cutting smaller trees and bushes, a grass blade with support cup for mowing heavy

grass and trimmer head for trimming grass. Standard equipment also includes a combi-guard to be used with both the grass blade and trimmer head. When using a saw blade, you need to change to a special saw blade guard, which is included for safety reasons. Thanks to the quick shift fastener, these changes are made easy.

Husqvarna 343FR Husqvarna 335FR Husqvarna 235FR

30

TECHNICAL SPECIFICATIONS 327Rx


Power, hp / kW * 1.2 / 0.9


Low Vib®

Smart Start®

Auto return stop switch

High offset post

Harness Balance 35

= Available * Engine power values are as rated by the engine manufacturer. Features glossary and further technical specifications on pages 42 – 43.

Professional brushcutter with first-rate ergonomics.The 327Rx brushcutter is the best choice if you’re looking for superior ergonomics, such as the lowest vibrations, emissions, weight and fuel consumption, combined with the best performance. To achieve top performance it takes the most advanced technological know-how and unique selection of materials. It is supplied with a specially designed ergonomic harness. The long shaft and bevel gear, angled 35 degrees, simplifies work. Very low vibrations

thanks to Low Vib®, combined with the Balance XT harness, minimize operator fatigue. Husqvarna's 327Rx brushcutter is a lightweight brushcutter for long, fast-paced work shifts and is suitable for working in parks, golf courses, and other demanding landscapes. The ergonomic and comfortable double harness and angled handlebars provide for quick adjustment, ensuring a comfortable working position.

Ideal for fast-paced long shifts in demanding landscapes. The easy-adjust harness and

angled, adjustable handlebar ensure a more comfortable working position.

ERGONOMICS FOR LONGER HANDLING

31

TECHNICAL SPECIFICATIONS 323R


Power, hp / kW * 1.2 / 0.9

Weight excl. accessories, lbs 9.9

Smart Start®

Combi guard


Harness Standard double


High performance, versatile brushcutter for those bigger jobs.This versatile brushcutter brings high performance, as well as maneuverability for a variety of tasks. From light edge trimming to clearing thicker grass, this powerful brushcutter is ideal for rapid-paced long shifts in parks, yards and on golf courses. The easy-adjust harness and ergonomically designed angled handlebars provide a pleasant grip and comfortable working position.

Smart Start® and fuel pump allow for easy starting. The engine and starter on the 323R have been designed so the machine starts quickly with minimum effort. Resistance in the starter cord is reduced by up to 40 %. The cutting attachment combi-guard can be used with either a grass blade or a trimmer head.

You don’t have to sacrifice ergonomics and performance when this top

brushcutter is more than you need, even for bigger jobs.

COMMERCIALLY VERSATILE

32

TECHNICAL SPECIFICATIONS 327RJx


Power, hp / kW * 1.2 / 0.9


Smart Start®

Combi guard

Soft-grip handle

Adjustable handlebar / handle, wing nut

Harness Standard single


Landowners and those who seek reliable proven performance and quality will find the 327RJx easy to operate. It is ideal for small to medium sized yards that have a range of needs and require a machine which is versatile enough to handle seasonal lawn and garden growth.

Effective grass trimming and weed cutting for every angle.If you prefer or need the handling and versatility of a loop handle trimmer with the capacity of a grass blade, the RJ series trimmer with J-handles is the one for you. Equipped with a grass blade and trimmer head and powerful enough to handle everything from heavy grass

to dense weed, the 327RJx is fitted with Smart Start®, and designed to start quickly with minimal effort. The cutting attachment combi-guard can be used with either a grass blade or a trimmer head.

GENERAL GARDEN NEEDS

33

Husqvarna 335LSHusqvarna 426LSTHusqvarna 430LS Husqvarna 327LS / 326LS

COMMERCIAL PERFORMANCE

TECHNICAL SPECIFICATIONS 430LS 426LST 335LS 327LS 326LS

Displacement, cc 29.5 25.4 34.6 24.5 24.5

Power, hp / kW * 1.4 / 1.1 1.2 / 0.9 2.2 / 1.6 1.2 / 0.9 1.2 / 0.9

Weight, excl. cutting equipment and guard, lbs 12.3 11.8 13.0 10.4 10.4

X-Torq® ― ― ― ―

Stand alone starter ― ― ―

Heavy duty gear box


Special trimmers for landscaping.Husqvarna LS model trimmers are designed to specifically meet the needs of those with large, landscaped grass areas to maintain. They feature high power and torque for the best performance, and a solid design including a heavy-

duty gear box. They can withstand tough treatment, including regular transportation, and frequent loading and unloading.

Large landscaped areas of grass can require a short journey to reach and often have disctinctive needs. This range of trimmers can handle any demanding job. Their robust design makes them ideal for transporting too.

34

Husqvarna 323L Husqvarna 223LHusqvarna 224L

TECHNICAL SPECIFICATIONS 323L 224L 223L


Power, hp / kW * 1.2 / 0.9 1.1 / 0.8 1.1 / 0.75


Smart Start®


Fuel pump


PROFESSIONAL GRADE

Ideal for landowners who demand optimal performance, easy starting and comfortable handling, these models power through the toughest of jobs and still handle the rigors of frequent use and transportation.

Professional trimmers for large landowners.For the large landowner and others demanding commercial grade products, we offer a complete line of powerful trimmer options. They provide many of the features of our commercial trimmers, including a 3-piece

forged crankshaft and large oiled foam filters, to ensure years of trouble free use. The 224L uses the latest 4-stroke engine technology, eliminating the need for pre-mixed gas and oil.

35

Husqvarna 128L Husqvarna 128C

TECHNICAL SPECIFICATIONS 128L 128C


Power, hp / kW * 1.1 / 0.8 1.1 / 0.8

Weight, excl. cutting equipment and guard, lbs 10.6 9.7

Smart Start®


Fuel pump


RELIABLE PERFORMER

Trimmers for demanding homeowners.This range of lightweight, versatile trimmers will make any trimming job a lot easier. From heavier grass trimming to moderate edging, these machines are suited for the homeowner who wants to maintain his yard. The ergonomic design and genuine Husqvarna feel provides

homeowners a high performing trimmer with many of the same features as our top pro models. Loop handles make them easy to operate, and perfect for small to medium sized yards. Smart Start® ensures that the engine starts quickly and with minimum effort.

Beautifully cut lawns still look unruly when there are places where the mower can’t reach. This range of trimmers guarantees great performance even in the most demanding situations. They are easy to store, and add the finishing touches to a job well done.

36

Husqvarna 327LDx Husqvarna 324LDx Husqvarna 128LDx

TECHNICAL SPECIFICATIONS 327LDx 324LDx 128LDx


Power, hp / kW * 1.2 / 0.9 1.1 / 0.8 1.1 / 0.8


Smart Start®

Auto return stop switch ―

Pure gasoline engine (4-stroke) ― ―

Detachable shaft

Soft-grip handle ―

Price


Combi-trimmers with optional accessories.The LD combi-trimmers are ideal if you are looking for a versatile trimmer that makes the task of cutting grass simple and less tiring. In fact, with their multi-purpose attachments, a combi-trimmer can handle grass trimming, hedge trimming, sweeping, blowing, tree pruning, edging

and soil cultivating all with the same base engine unit. This enables the user to easily reach areas a lawnmower can’t reach. Plus, using the same engine means you only have one tuned machine to maintain instead of several different ones.

It’s surprising how many jobs there are for a trimmer around the yard. Although small, they demand just as much time and attention. Husqvarna Combi-trimmers will give you the range and the cutting power you’ll need for great results.

GREAT MULTI-PURPOSE FOR THE YARD

37

GREAT MULTI-PURPOSE FOR THE YARD

Pole saw.Gives extra reach when needed. Cuts branches up to approximately 6 inches in thickness.

Trimmer.The standard attachment supplied with your unit, the trimmer head will power through any jobs.

Hedge trimmers.Straight edges are now within reach. Available in two lengths for different cutting situations.

Sweeper.Large capacity rubber broom attachment gives sweeping action without marking. Width 23.6 inches.

Edger.Keeps lawns, pathways and fl owerbeds looking good with straight, neat edging.

Cultivator.Ideal on delicate fl owerbeds and around the base of trees.

38

Husqvarna 426Ex Husqvarna 327ES Husqvarna 326Ex Husqvarna 323Ex

TECHNICAL SPECIFICATIONS 426Ex 327ES 326Ex 323Ex

Displacement, cc 25.4 25.0 24.5 24.5

Power, hp / kW * 1.2 / 0.9 1.2 / 0.9 1.2 / 0.9 1.2 / 0.9

Weight, excl. cutting equipment and guard, lbs 13.6 12.9 11.9 11.9

Smart Start®

Air purge


Adjustable handle, wing nut


High performance, professional edgers with superior features.Maintain a precise edge with a dedicated edger. We have a variety of units to cover all your needs. The long shaft and bevel gear simplifies work. Very low vibrations, thanks to Low Vib®, minimize operator fatigue. All units feature a

large guide wheel that allows you to quickly adjust edger depth. The durable 7 1/2" edger blade allows up to 2 1/2" cut depth. Lightweight and easy to maneuver, they are perfect for edging sidewalks, driveways, curbs or flower beds.

Well-suited for long shifts, with an emphasis on performance and comfort, yet durable

enough to withstand the punishment of daily use and transportation.

ENGINEERED FOR ENDURANCE

39

TECHNICAL SPECIFICATIONS 125E


Power, hp / kW * 1.1 / 0.8

Weight excl. accessories, lbs 10.8

Smart Start®


Air purge

Adjustable handle, wing nut


Consistent results for the discerning homeowner.This curved shaft edger brings high performance as well as maneuverability to the homeowner. From light edge trimming, to managing thicker grass along your driveway or sidewalk, this powerful edger is perfectly suited for all of the edging projects around the house. The ergonomically

designed handle is easy to adjust and provides a pleasant grip and comfortable working position. The Smart Start® engine ensures that the machine starts quickly and with less effort.

A versatile edger with many of the same features found in our professional models,

the 125E is ideal for the demanding homeowner seeking reliable results.

LIGHTWEIGHT AND MANEUVERABLE

40

ACCESSORIES

Demanding jobs require the right accessories. Choose Husqvarna accessories and experience performance with great results. At Husqvarna we understand that a job becomes better, safer and maybe even more enjoyable with the right accessories, protection and clothing. That’s why our accessories for clearing saws, brushcutters, trimmers

and edgers have the same thinking behind them as any of our Husqvarna products. This results in real benefits for our users’ overall well being, their working conditions, and above all, productivity.

The Husqvarna range of product accessories includes everything from cutting blades and guards, chains and bars to fi ling equipment.

Different jobs need different tools. We aim to keep the right tool and attachments in your hands.

Protecting yourself when using outdoor power equipment means head-to-toe thinking.

Using a machine the right way also makes a difference in how it handles, and the results you experience. Our ergonomically designed harnesses effectively spread the machine’s weight to maximize balance. This makes the machine feel lighter, more maneuverable and less strenuous to work with.

Visit the Husqvarna web page for our full range of accessories. Here you’ll find advice on which part is right for your machines. You’ll also find a range of professional work and safety wear designed with your job in mind.

When you’re working outdoors in harsh environments and diffi cult weather conditions, it’s important to have the right protective clothing.

www.husqvarna.com

41

TECHNICAL FEATURES

Low Vib®.Effective anti-vibration dampeners absorb vibration, sparing the user’s arms and hands.

X-Torq®.Our patented, world-leading, 2-stroke X-Torq® engine technology gives you more power where you need it, but with up to 20 % less fuel consumption and up to 60 % less emissions, when compared to a standard 2 stroke engine. It’s technology that works for you and the environment.

Smart Start®.The engine and starter have been designed so the machine starts quickly with minimum effort. Resistance in the starter cord is reduced by up to 40 %.

Auto return stop switch.Stop switch automatically resets to the ON position for trouble-free starting.

Thermostat-controlled heated handles.Thermostat-controlled heating in the handles for work in cold and wet climates.

Ergonomic handles.Angled handlebar and comfort handles provide excellent grip and working position.

Soft-grip handle.The soft-grip handle reduces vibrations and provides added comfort.

Thumb-operated throttle.Thumb-operated throttle, for effi ciency and precision control,reduces strain on the hand muscles.

Adjustable handlebar / handle, wing nut.The ergonomically designed handlebars and handles are easily adjusted by twisting the wing nut.

Balance XT harness.A harness providing top- notch ergonomics spreads the load on both shoulders, over the chest and the back and on the hips. This makes the machine feel much lighter, and less strenuous to move around. A wide adjustable back plate, which is ventilated and shaped to fi t the curve of the back, allows the harness to fi t different body sizes. The shock-absorbing hip pad, with a traveling connection, and wide, padded hip belt reduces strain on the body.

Balance X™ harness.A unique ergonomic harness that effectively spreads the machine’s weight and maximizes its excellent balance. The machine feels much lighter, and much easier and less strenuous to move. Ergonomic harness with broad back support that distributes the load over a larger area. The hip belt has a shock-absorbing hip pad.

Balance harness.An ergonomic harness that distributes the load optimally between shoulders, chest and back. Wide padded straps and wide back plate reduce the load. Hip pad with traveling connection reduces movement on the body.

High offset post.The high offset post increases freedom of movement when working on slopes.

Detachable shaft.Detachable shaft for easy transport and storage.

The Husqvarna brushcutter features glossary.

TIPS BEFORE BUYING

What to consider before making your choice.

Clearing saws.The first question is what type of vegetation do you intend to clear? A forestry clearing saw, for example, has a shorter shaft for increased maneuverability in tight spaces, and the acute angle of the mitre gear makes it easier to fell in a desired direction.

The machine should have an efficient vibration-dampening ■

system as high vibration easily causes fatigue.

For maximum efficiency, the clearing saw should have ■

high power, high torque and rapid acceleration.

The handlebar should be angled relative to the shaft, ■

to prevent an uneven load being placed on the back. The machine should also have an ergonomic harness.

Brushcutters.There are a variety of brushcutters available and a wide range of accessories that enable you to use the same machine for trimming grass, as well as clearing brushwood, bushes and small trees.

For maximum efficiency, the brushcutter should have ■

high power, high torque and rapid acceleration.

Use the machine with a harness to spread the load, ■

improving comfort and efficiency.

Visit the Husqvarna web page for our full range bruschcutters, clearing saws, trimmers and accessories. Here you’ll find additional advice to help you decide which machine is right for the job you have in mind. For more information regarding your purchase, contact your Husqvarna servicing dealer.

42


FORESTRY CLEARING SAWS BRUSHCUTTERS TRIMMERS

355Fx 343FR 335FR 235FR 327Rx 323R 327RJx 430LS 426LST 335 LS 327LS 326LS

Displacement, cc 53.3 45.0 35.0 40.2 24.5 24.5 24.5 29.5 25.4 34.6 24.5 24.5Power, hp / kW * 3.8 / 2.8 2.7 / 2.0 2.2 / 1.6 1.8 / 1.3 1.2 / 0.9 1.2 / 0.9 1.2 / 0.9 1.4 / 1.1 1.2 / 0.9 2.2 / 1.6 1.2 / 0.9 1.2 / 0.9Sound pressure level at operator’s ear, dB(A) ** 103 100 96 98 95 90 95 N / A N / A 98 98 98Equivalent vibration level (a hv , eq) left / right handle, m /s²*** 2.1 / 2.3 2.0 / 3.0 2.5 / 2.7 5.9 / 3.4 2.4 / 1.9 3.0 / 4.0 3.8 / 2.9 N / A N / A 4.7 / 6.6 4.2 / 3.1 4.2 / 3.1Weight excl, accessories, lbs 19.6 18.1 13.7 16.1 10.8 9.9 10.8 12.3 11.8 13.0 10.4 9.0Thumb-operated throttle ― ― ― ― ― ― ― ― ― ― ―Pure gasoline engine (4-stroke) ― ― ― ― ― ― ― ― ― ― ― ―X-Torq® ― ― ― ― ― ― ― ― ―Low Vib® ― ― ― ― ― ― ― ―Center of gravity engine ― ― ― ― ― ― ― ― ― ―Smart Start® – ― ― ― ― ― ―Stand alone starter ― ― ― ― ― ― ― ― ―Auto return stop switch ― ― ―Fuel pumpDetachable shaft ― ― ― ― ― ― ― ― ― ― ― ―Thermostat-controlled heated handles ― ― ― ― ― ― ― ― ― ― ― ―Ergonomic handles ― ―Soft-grip handle ― ― ― ― ― ― ―Adjustable handlebar / handle, wing nut ― ― ― ― ― ―High offset post ― ― ― ― ― ― ― ― ― ― ―Forestry bevel gear ― ― ― ― ― ― ― ― ― ― ―Grass bevel gear ―Combi guard ― ― ― ―Balance XT harness ― ― ― ― ― ― ― ― ― ― ―Balance X™ harness ― ― ― ― ― ― ― ― ― ― ―Balance 35 harness ― ― ― ― ― ― ― ― ―Standard harness, double / single ― ― ― ― ― Double Single ― ― ― ― ―

TRIMMERS EDGERS

323L 224L 223L 128 L 128C 327LDx 324LDx 128LDx 426Ex 327ES 326Ex 323Ex 125E

Displacement, cc 24.5 25.0 24.5 28.0 28.0 24.5 25.0 28.0 25.4 24.5 24.5 24.5 28.0Power, hp / kW * 1.2 / 0.9 1.1 / 0.8 1.2 / 0.75 1.1 / 0.8 1.1 / 0.8 1.2 / 0.9 1.1 / 0.8 1.1 / 0.8 1.2 / 0.9 1.2 / 0.9 1.2 / 0.9 1.2 / 0.9 1.1 / 0.8Sound pressure level at operator’s ear, dB(A) ** 98 97 98 97 97 94 97 94 N / A 97 97 97 94Equivalent vibration level (a hv , eq) left / right handle, m /s²*** 4.2 / 3.1 1.9 / 1.2 4.2 / 3.1 4.8 / 6.4 4.8 / 6.4 2.9 / 3.4 4.1 / 4.1 2.9 / 3.4 N / A N / A N / A N / A 2.9 / 3.4Weight excl, accessories, lbs 9.0 11.2 9.0 10.6 9.7 11.2 11.9 10.8 13.6 12.9 11.9 11.9 10.8Thumb-operated throttle ― ― ― ― ― ― ― ― ― ― ― ― ―Pure gasoline engine (4-stroke) ― ― ― ― ― ― ― ― ― ― ― ―X-Torq® ― ― ― ― ― ― ― ― ― ― ― ― ―Low Vib® ― ― ― ― ― ― ― ― ― ― ― ― ―Center of gravity engine ― ― ― ― ― ― ― ― ― ― ― ― ―Smart Start®

Stand alone starter ― ― ― ― ― ― ― ― ― ― ― ― ―Auto return stop switch ―Fuel pumpDetachable shaft ― ― ― ― ―Thermostat-controlled heated handles ― ― ― ― ― ― ― ― ― ― ― ― ―Ergonomic handlesSoft-grip handle ― ― ― ― ― ― ― ― ― ― ―Adjustable handlebar / handle, wing nut ― ― ― ― ― ― ― ― ― ― ―High offset post ― ― ― ― ― ― ― ― ― ― ― ― ―Forestry bevel gear ― ― ― ― ― ― ― ― ― ― ― ― ―Grass bevel gearCombi guard ― ― ― ― ― ― ― ― ― ― ― ― ―Balance XT harness ― ― ― ― ― ― ― ― ― ― ― ― ―Balance X™ harness ― ― ― ― ― ― ― ― ― ― ― ― ―Balance 35 harness ― ― ― ― ― ― ― ― ― ― ― ― ―Standard harness, double / single ― ― ― ― ― ― ― ― ― ― ― ― ―

= Available ― = Not available N / A = Not available at time of printing. * Engine power values are as rated by the engine manufacturer. ** Equivalent sound pressure level, as per ISO 22868, is calculated as the time-weighted energy sum for the sound pressure levels at various operational states. Typical variation for equivalent sound pressure level is a standard deviation of 1.0 dB(A). *** Equivalent vibration level, as per ISO 22867, is calculated as the time-weighted energy sum for the vibration levels at various operational states. The data presented for equivalent vibration level has a typical variation (standard deviation) of 1.0 m/s².

43


FORESTRY CLEARING SAWS BRUSHCUTTERS TRIMMERS

355Fx 343FR 335FR 235FR 327Rx 323R 327RJx 430LS 426LST 335 LS 327LS 326LS

Displacement, cc 53.3 45.0 35.0 40.2 24.5 24.5 24.5 29.5 25.4 34.6 24.5 24.5Power, hp / kW * 3.8 / 2.8 2.7 / 2.0 2.2 / 1.6 1.8 / 1.3 1.2 / 0.9 1.2 / 0.9 1.2 / 0.9 1.4 / 1.1 1.2 / 0.9 2.2 / 1.6 1.2 / 0.9 1.2 / 0.9Sound pressure level at operator’s ear, dB(A) ** 103 100 96 98 95 90 95 N / A N / A 98 98 98Equivalent vibration level (a hv , eq) left / right handle, m /s²*** 2.1 / 2.3 2.0 / 3.0 2.5 / 2.7 5.9 / 3.4 2.4 / 1.9 3.0 / 4.0 3.8 / 2.9 N / A N / A 4.7 / 6.6 4.2 / 3.1 4.2 / 3.1Weight excl, accessories, lbs 19.6 18.1 13.7 16.1 10.8 9.9 10.8 12.3 11.8 13.0 10.4 9.0Thumb-operated throttle ― ― ― ― ― ― ― ― ― ― ―Pure gasoline engine (4-stroke) ― ― ― ― ― ― ― ― ― ― ― ―X-Torq® ― ― ― ― ― ― ― ― ―Low Vib® ― ― ― ― ― ― ― ―Center of gravity engine ― ― ― ― ― ― ― ― ― ―Smart Start® – ― ― ― ― ― ―Stand alone starter ― ― ― ― ― ― ― ― ―Auto return stop switch ― ― ―Fuel pumpDetachable shaft ― ― ― ― ― ― ― ― ― ― ― ―Thermostat-controlled heated handles ― ― ― ― ― ― ― ― ― ― ― ―Ergonomic handles ― ―Soft-grip handle ― ― ― ― ― ― ―Adjustable handlebar / handle, wing nut ― ― ― ― ― ―High offset post ― ― ― ― ― ― ― ― ― ― ―Forestry bevel gear ― ― ― ― ― ― ― ― ― ― ―Grass bevel gear ―Combi guard ― ― ― ―Balance XT harness ― ― ― ― ― ― ― ― ― ― ―Balance X™ harness ― ― ― ― ― ― ― ― ― ― ―Balance 35 harness ― ― ― ― ― ― ― ― ―Standard harness, double / single ― ― ― ― ― Double Single ― ― ― ― ―

TRIMMERS EDGERS

323L 224L 223L 128 L 128C 327LDx 324LDx 128LDx 426Ex 327ES 326Ex 323Ex 125E

Displacement, cc 24.5 25.0 24.5 28.0 28.0 24.5 25.0 28.0 25.4 24.5 24.5 24.5 28.0Power, hp / kW * 1.2 / 0.9 1.1 / 0.8 1.2 / 0.75 1.1 / 0.8 1.1 / 0.8 1.2 / 0.9 1.1 / 0.8 1.1 / 0.8 1.2 / 0.9 1.2 / 0.9 1.2 / 0.9 1.2 / 0.9 1.1 / 0.8Sound pressure level at operator’s ear, dB(A) ** 98 97 98 97 97 94 97 94 N / A 97 97 97 94Equivalent vibration level (a hv , eq) left / right handle, m /s²*** 4.2 / 3.1 1.9 / 1.2 4.2 / 3.1 4.8 / 6.4 4.8 / 6.4 2.9 / 3.4 4.1 / 4.1 2.9 / 3.4 N / A N / A N / A N / A 2.9 / 3.4Weight excl, accessories, lbs 9.0 11.2 9.0 10.6 9.7 11.2 11.9 10.8 13.6 12.9 11.9 11.9 10.8Thumb-operated throttle ― ― ― ― ― ― ― ― ― ― ― ― ―Pure gasoline engine (4-stroke) ― ― ― ― ― ― ― ― ― ― ― ―X-Torq® ― ― ― ― ― ― ― ― ― ― ― ― ―Low Vib® ― ― ― ― ― ― ― ― ― ― ― ― ―Center of gravity engine ― ― ― ― ― ― ― ― ― ― ― ― ―Smart Start®

Stand alone starter ― ― ― ― ― ― ― ― ― ― ― ― ―Auto return stop switch ―Fuel pumpDetachable shaft ― ― ― ― ―Thermostat-controlled heated handles ― ― ― ― ― ― ― ― ― ― ― ― ―Ergonomic handlesSoft-grip handle ― ― ― ― ― ― ― ― ― ― ―Adjustable handlebar / handle, wing nut ― ― ― ― ― ― ― ― ― ― ―High offset post ― ― ― ― ― ― ― ― ― ― ― ― ―Forestry bevel gear ― ― ― ― ― ― ― ― ― ― ― ― ―Grass bevel gearCombi guard ― ― ― ― ― ― ― ― ― ― ― ― ―Balance XT harness ― ― ― ― ― ― ― ― ― ― ― ― ―Balance X™ harness ― ― ― ― ― ― ― ― ― ― ― ― ―Balance 35 harness ― ― ― ― ― ― ― ― ― ― ― ― ―Standard harness, double / single ― ― ― ― ― ― ― ― ― ― ― ― ―

= Available ― = Not available N / A = Not available at time of printing. * Engine power values are as rated by the engine manufacturer. ** Equivalent sound pressure level, as per ISO 22868, is calculated as the time-weighted energy sum for the sound pressure levels at various operational states. Typical variation for equivalent sound pressure level is a standard deviation of 1.0 dB(A). *** Equivalent vibration level, as per ISO 22867, is calculated as the time-weighted energy sum for the vibration levels at various operational states. The data presented for equivalent vibration level has a typical variation (standard deviation) of 1.0 m/s².

44

Effortless hedge cutting with beautiful results.

45

Beautifully manicured hedges take time and care. Perfect hedge trimming can be both monotonous and strenuous — if you don’t use the right kind of tools. No matter whether the hedge is high or wide, the hedge trimmer needs to be a powerful extension of your arms to do the job well. Our goal is to provide you with the most effective hedge trimmers, so you can look back after a day’s work and admire the results, without an agonizing strain on your arms and back. Husqvarna hedge trimmers are designed to do their tasks efficiently. They deliver the complete package with ergonomically designed construction, precise cutting strength, exceptional balance, control and overall feel.


46

Performance.Developed to combine superb handling with impressive high performance and blade speeds to give optimum cutting results.

Effi ciency.Since the branches and twigs in a hedge vary a great deal in diameter, it is essential to provide maximum cutting performance with a strong transmission and large knife openings.

Ergonomics.Pivoting handles facilitate top and side trimming. The center balanced front loop handle makes for easy handling. The effective anti-vibration system is less strenuous on the user’s arms and hands.


Smart Start®. Starts quickly with minimal effort.

Durable gear components. Ensures long service life.

Razor sharp blades. For the best cutting performance.

47

www.husqvarna.com


Durability.The gears and knives on hedge trimmers are exposed to extreme stress and wear. All of our components have been developed for long life under tough conditions.

Environment.All of our commercial hedge trimmers are equipped with an emissions reducing control system. This also creates a better working environment for the operator when trimming large hedges and over long shifts.

Safety.The double-sided hedge trimmers are equipped with a knife guard. When working with our effective pole hedge trimmers, the knives are at a longer distance from the handles.

X-Torq® engine. Expect greater power from less fuel.

Adjustable rear handle. Comfortable control.

48

Husqvarna 327HE4x Husqvarna 327HE3x

TECHNICAL SPECIFICATIONS 327HE4x 327HE3x


Power, hp / kW * 1.2 / 0.9 1.2 / 0.9

Weight, lbs 13.4 13.2

Blade length, inches 21.7 21.7

Total length, inches 92.0 67.0

Smart Start®


Remote controlled cutter bar

Cutter bar transport mode ―

Rear impact guard ―

Soft-grip handles

= Available ― = Not available * Engine power values are as rated by the engine manufacturer. Features glossary and further technical specifications on pages 52 –53.

When you need to work at arm’s length, whether with tall plants or low ground cover, you need a pole hedge trimmer designed to give you added reach and flexibility. With the 327 series, you can expect to achieve professional results.

Professional pole hedge trimmers with adjustable cutter bars.These hedge trimmers are suitable for use on low, as well as high hedges. They come with an adjustable cutting bar that ensures flexibility and comfort while working. The remote controlled cutter bar also makes it easy to adjust the angle of the cutter bar during operation. Their fine balance and ergonomics make them ideal for long shifts. The engine serves as a counterweight for the cutter bar, and makes the

machine exceptionally well-balanced and comfortable to use. The reach and adjustable cutting bar make them suitable for both tall and low hedges, without the need for a ladder or lift. Both models have Smart Start® and a fuel pump for easy starting. The cutter bar on the 327HE4x can be folded back against the tube for handy storage and transport.

FOR EXTRA REACH

49

TECHNICAL SPECIFICATIONS 226HD75S 226HD60S


Power, hp / kW * 1.1 / 0.9 1.1 / 0.9



X-Torq®

Adjustable rear handle

Heavy duty gear box

Stand alone starter


Regardless of the size and scope of your project the 226 series of hedge trimmers will make quick work of the task. Their design gives you a durable and trouble-free hedge trimmer.

Double-sided and durable hedge trimmers.

PROFESSIONAL POWER

These models are exceptionally well-balanced and rugged hedge trimmers with X-Torq® engines. The robust design increases service life during tough use, while the X-Torq® engine increases productivity by delivering maximum

power at a wider rpm range. X-Torq® also reduces emissions by up to 60 %, and increases fuel efficiency by up to 20 %. The adjustable rear handle adds versatility, and facilitates easier cutting on the sides and top of hedges.

50

Husqvarna 123HD65x Husqvarna 123HD60

TECHNICAL SPECIFICATIONS 123HD65x 123HD60


Power, hp / kW * 0.8 / 0.6 0.8 / 0.6



Smart Start®

Low Vib®

Adjustable rear handle ―


For jobs that require extra maneuverability and handling, choose this range. Their flexible handling allows for difficult cutting angles, making them suitable for cutting and shaping all types of hedges.

Double-sided hedge trimmers for demanding users.Our 123 series hedge trimmers are designed for shaping portions of hedges and offer efficient and comfortable operation, with features such as Smart Start® and fuel pump for easier starts, and Low Vib® vibration dampening. These models also feature engines that reduce emissions, while

increasing the power-to-weight ratio. Both models have been developed to combine good ergonomic design with high quality and excellent cutting performance. The Husqvarna 123HD65x is equipped with a rear handle that can be rotated for cutting the sides or tops of hedges.

SHAPING AND MODELING

51

Husqvarna 226HS99S Husqvarna 226HS75S

TECHNICAL SPECIFICATIONS 226HS99S 226HS75S


Power, hp / kW * 1.1 / 0.9 1.1 / 0.9



X-Torq®

E-Tech® II

Ergonomic handles


These single-sided hedge trimmers allow for longer blades, and cut wide hedges in one sweeping movement.

Professional single-sided hedge trimmers with high capacity.

THE PROFESSIONAL EDGE

With single-sided blades, it’s possible to have longer cutter bars without placing too much weight on the bar, making it convenient for cutting wide hedges in a single sweep. These well-balanced and light single-sided hedge trimmers make your work easier and more efficient through their

increased reach and high cutting precision. The X-Torq® engine delivers maximum power at a wider rpm range and reduces emissions by up to 60 %, and increases fuel efficiency by up to 20 %. E-Tech® II further reduces emissions without compromising power.

52

327HE4x 327HE3x 226HD75S 226HD60S 123HD65x 123HD60 226HS99S 226HS75S

Displacement, cc 24.5 24.5 23.6 23.6 22.5 22.5 23.6 23.6

Power, hp / kW * 1.2 / 0.9 1.2 / 0.9 1.1 / 0.9 1.1 / 0.9 0.8 / 0.6 0.8 / 0.6 1.1 / 0.9 1.1 / 0.9

Sound pressure level at operators ear, dB(A) ** 88 92 91 91 95 97 95 95

Equivalent vibration level (a hv , eq) front / rear handle, m /s² *** 2.2 / 2.6 5.5 / 4.1 3.0 / 4.7 3.0 / 4.6 1.4 / 1.5 1.4 / 1.5 5.5 / 4.1 5.5 / 4.1

Blade length, inches 21.7 21.7 30.0 24.0 24.0 22.0 40.0 30.0

Total length, inches 92.0 67.0 ― ― ― ― ― ―

Weight excl. accessories, lbs 13.4 13.2 13.0 12.6 11.5 11.2 13.3 12.4

X-Torq® ― ― ― ―


E-Tech® ― ― ― ― ― ― ― ―

E-Tech® II ― ―

Low Vib® ― ― ― ―

Stand alone starter ― ― ― ― ― ―

Auto return stop switch ― ― ― ―

Fuel pump

Adjustable rear handle ― ― ― ― ―

Ergonomic handles

Remote controled cutter bar ― ― ― ― ― ―

Angleable cutter bar ― ― ― ― ― ―

Cutter bar transport mode ― ― ― ― ― ― ―

Rear impact guard ― ― ― ― ― ― ―

Soft-grip handles ― ― ― ― ―

= Available ― = Not available * Engine power values are as rated by the engine manufacturer. ** Equivalent sound pressure level, as per ISO 22868, is calculated as the time-weighted energy sum for the sound pressure levels at various operational states. Typical variation for equivalent sound pressure level is a standard deviation of 1.0 dB(A). *** Equivalent vibration level, as per ISO 22867, is calculated as the time-weighted energy sum for the vibration levels at various operational states. The data presented for equivalent vibration level has a typical variation (standard deviation) of 1.0 m/s².

X-Torq®.Our patented, world-leading, 2-stroke X-Torq® engine technology gives you more power where you need it, and with up to 20 % less fuel consumption and up to 60 % less emissions, when compared to a standard 2 stroke engine. It’s technology that works for you and the environment.


E-Tech®.The E-Tech® engine combines reduced exhaust emissions with a superior power / weight ratio.

E-Tech® II.Exhaust emissions are reduced to levels below existing and known future requirements without compromising power.

Low Vib®.Effective anti-vibration dampeners absorb vibration, reducing fatigue on the user’s arms and hands.

Auto return stop switch.The stop switch automatically resets to the ON position for trouble-free starting.

The Husqvarna hedge trimmer features glossary.

TECHNICAL FEATURES

Fuel pump.The fuel pump is designed for very easy starting.

Adjustable rear handle.The rear handle is adjustable to facilitate cutting the sides and top of hedges.

Ergonomic handles.The handles are ergonomically designed to reduce unnecessary strain.

Remote release cutter bar.The remote control makes it easy to adjust the cutter bar angle during operation.

Adjustable cutting bar angle.The adjustable cutter bar ensures greater versatility and reduces operator fatigue.

Cutter bar transport mode.The cutter bar can be folded back along the tube into a transport mode for easy transport and storage.

53

www.husqvarna.com

327HE4x 327HE3x 226HD75S 226HD60S 123HD65x 123HD60 226HS99S 226HS75S

Displacement, cc 24.5 24.5 23.6 23.6 22.5 22.5 23.6 23.6

Power, hp / kW * 1.2 / 0.9 1.2 / 0.9 1.1 / 0.9 1.1 / 0.9 0.8 / 0.6 0.8 / 0.6 1.1 / 0.9 1.1 / 0.9

Sound pressure level at operators ear, dB(A) ** 88 92 91 91 95 97 95 95

Equivalent vibration level (a hv , eq) front / rear handle, m /s² *** 2.2 / 2.6 5.5 / 4.1 3.0 / 4.7 3.0 / 4.6 1.4 / 1.5 1.4 / 1.5 5.5 / 4.1 5.5 / 4.1

Blade length, inches 21.7 21.7 30.0 24.0 24.0 22.0 40.0 30.0

Total length, inches 92.0 67.0 ― ― ― ― ― ―

Weight excl. accessories, lbs 13.4 13.2 13.0 12.6 11.5 11.2 13.3 12.4

X-Torq® ― ― ― ―


E-Tech® ― ― ― ― ― ― ― ―

E-Tech® II ― ―

Low Vib® ― ― ― ―

Stand alone starter ― ― ― ― ― ―

Auto return stop switch ― ― ― ―

Fuel pump

Adjustable rear handle ― ― ― ― ―

Ergonomic handles

Remote controled cutter bar ― ― ― ― ― ―

Angleable cutter bar ― ― ― ― ― ―

Cutter bar transport mode ― ― ― ― ― ― ―

Rear impact guard ― ― ― ― ― ― ―

Soft-grip handles ― ― ― ― ―



TIPS BEFORE BUYING

Before you choose a hedge trimmer, consider how it will be used. High or low hedges? Will you be shaping the hedge? Below are some tips for choosing a hedge trimmer.

Double-sided hedge trimmers.If you choose a double-sided hedge trimmer, the machine should have an adjustable rear handle. This provides increased flexibility and better ergonomics when trimming the sides of hedges. For shaping hedges, the double-sided trimmer is the most suitable.

Single-sided hedge trimmers.The machine’s design makes it easier for you to cut straight. Since there are only teeth on one side of the cutting bar, you can have longer blades without the machine becoming too heavy. The longer blade lets you clip larger areas in a single sweep.

Pole hedge trimmers.Pole hedge trimmers are used for cutting high and low


hedges and ground cover. With a pole hedge trimmer, you can cut high hedges from the ground. The adjustable cutting bar increases flexibility, and helps you maintain a healthier posture while you work. The ability to angle the cutter bar improves your reach and speed when cutting low or high hedges.

The machine should have an efficient vibration-dampening ■

system to minimize vibrations in those parts of the machine that the user comes in contact with during normal operation.

The engine should have some form of emission control, ■

for the benefit of the user’s working environment, as well as the environment as a whole.

Choose a hedge trimmer with an appropriate length ■

of cutter bar for the job you intend to do.

Visit the Husqvarna web page for our full range of hedge trimmers and accessories. Here you’ll find additional advice to help you decide which machine is right for the job you have in mind. For more information regarding your purchase, contact your Husqvarna servicing dealer.

54

Leaves are just the beginning. Make clean up and clearing a more manageable job.

55


Straw, grass, dust, cobwebs, sand and even gravel... our blowers do more than just blow leaves.With Husqvarna’s effective blowers, you can make one of the most tedious and tiresome jobs fun and rewarding. For homeowners and professionals alike — our blowers include both hand held models and powerful, professional back pack blowers. High blowing speed, low-vibration levels, ergonomic handles and harnesses help you work more efficiently with less strain on the hands, arms and shoulders. They are comfortable and fun to use all over the yard, on paths, patios, in the garage or trailer.

56

Performance.Featuring an effective fan design and good power to weight ratio. Smart Start® enables the blower to start quickly with minimum resistance. Resistance in the starter cord is reduced by up to 40 %.

Effi ciency.The fan housing is designed so that the air stream is in line with the handle. This makes the machine very easy to maneuver. Cruise control enables the fan speed to be set for easier handling.

Ergonomics.The harnesses provide optimal weight distribution that effi ciently balances the unit between the shoulders, hips, chest and back.


High speed capacity and large air volume. Effective blowing and collecting for leaves and debris.

X-Torq® engine. Expect greater power from less fuel.

Efficient air filter. For long service life.

57

www.husqvarna.com


Durability.Husqvarna blowers use commercial grade engines with large air fi lters for long service life. The auto return stop switch resets to the ON position for trouble-free starting.

Environment.Husqvarna blowers have low fuel consumption, and are equipped with an emission control system to reduce pollutants. In addition, the unique 356BT blower also features the lowest noise level on the market.

Safety.All moving parts are made from high quality materials, and are securely placed and covered to ensure user safety.

Adjustable handle. Reduces twisting motion for easier, more comfortable handling.

Efficient fan design. High air speed, high air flow.

58

Husqvarna 380BFS Husqvarna 356BT / BFHusqvarna 370BTS / BFS Husqvarna 350BT / BF Husqvarna 130BT Husqvarna 125BT

TECHNICAL SPECIFICATIONS 380BFS 370BTS / BFS 356BT / BF 350BT / BF 130BT 125BT

Displacement, cc 71.9 64.9 51.7 50.2 29.5 25.0

Power, hp / kW * 4.4 / 3.3 3.5 / 2.6 3.2 / 2.4 2.1 / 1.6 1.3 / 0.96 1.3 / 0.96

Noise level, dB(A) 100 95 88 94 94 92

Air speed, tube, mph 201 198 177 180 145 140

Air fl ow, fan housing, cfm 915 742 766 692 431 385

Air fl ow, tube, cfm 685 565 473 494 360 311

Weight excl. accessories, lbs 29.5 26.5 22.4 22.5 14.8 13.0

X-Torq® ―

Air Injection™ ― ― ― ― ―

Low Vib® ― ― ― ―

Commercial grade air fi lter ― ― ― ―

= Available ― = Not available * Engine power values are as rated by the engine manufacturer. Features glossary and further technical specifications on pages 60–61.

Our backpack blowers take the strain and keep leaves and debris at bay. These models are ideal for tackling large areas, big jobs and long periods of heavy work.

Backpack blowers with professional capacity and ergonomics.Incorporating Husqvarna’s expertise in the design of powerful machines, these backpack blowers offer the user total control. Comfortable to use, these top models feature an adjustable handle with throttle lock control, outstanding ergonomics and comfortable harnesses. Several models offer

the option of a frame mounted or tube mounted throttle. All blowers in this range use low emission engines. The 356BT is also equipped with Husqvarna’s low noise engine specially designed for use in urban areas, or where there are noise level restrictions.

THE ULTIMATE PERFORMER

59

Husqvarna 125BVx / 125Bx Husqvarna 125B

TECHNICAL SPECIFICATIONS 125BVx 125Bx 125B


Power, hp / kW * 1.1 / 0.8 1.1 / 0.8 1.1 / 0.8

Noise level, dB(A) 92 92 92

Air speed, tube, mph 170 170 170

Air fl ow, fan housing, cfm 470 470 470

Air fl ow, tube, cfm 425 425 425

Weight excl. accessories, lbs 9.4 9.4 9.4

Smart Start® ―


Vac capable ―

Vac bag included ― ―

In line air outlet

= Available ― = Not available * Engine power values are as rated by the engine manufacturer. Features glossary and further technical specifications on pages 60–61.

Versatile and easy to handle blowers.Husqvarna’s lightweight blowers are easy to handle right from the start. The air outlet has a unique inline design that prevents the twisting forces common to most blowers. This design makes these blowers extremely easy to handle

and use. The air intake is placed outside away from the user for maximum performance and easy handling. Most models can also be used for collecting debris in vacuum mode.

HAND-HELD ACTION

Perfect for homeowners, these efficient blowers combine high blowing power with ergonomics, making them an ideal choice for various tasks around the yard.

60

380BFS 370BTS / BFS 356BT / BF 350BT / BF 130BT 125BT 125BVx 125Bx 125B

Displacement, cc 71.9 64.9 51.7 50.2 29.5 25.0 28.0 28.0 28.0Power, hp / kW * 4.4 / 3.3 3.5 / 2.6 3.2 / 2.4 2.1 / 1.6 1.3 / 0.96 1.3 / 0.96 1.1 / 0.8 1.1 / 0.8 1.1 / 0.8Sound pressure level at operator's ear, dB(A) ** / Noise level 15 m ANSI B 175.2 100 / 77 95 / 76 88 / 64 94 / 71 94 / 69 92 / 70 92 / 70 92 / 70 92 / 70Equivalent vibration level (a hv , eq) right handle, m /s² *** 3.4 3.6 3.9 2.2 2.5 1.2 11.1 11.1 11.1Air speed, tube, mph 201 198 177 180 145 140 170 170 170Air fl ow, fan housing, cfm 915 742 766 692 431 385 470 470 470Air fl ow, tube, cfm 685 565 473 494 360 311 425 425 425Weight excl. accessories, lbs 29.5 26.5 22.4 22.5 14.8 13.0 9.4 9.4 9.4 X-Torq® ― ― ― ― ―E-Tech® IISmart Start® ― ― ― ― ― ―Air Injection™ ― ― ― ― ― ― ― ―Low Vib® ― ― ― ― ― ― ―Commercial grade air fi lter ― ― ― ― ― ― ― Auto return stop switch ― ― ― ― ― ―Vac capable ― ― ― ― ― ― ―Vac bag included ― ― ― ― ― ― ― ―Mulching function ― ― ― ― ― ― ―Ergonomic handleAdjustable handle ― ― ―Soft-grip handle ―Low noise ― ― ― ― ― ― ― ―In-line air outlet ― ― ― ― ― ―Ergonomic harness ― ― ―Fuel pumpThrottle lock


TECHNICAL FEATURES

X-Torq®.Our patented, world-leading, 2-stroke X-Torq® engine technology gives you more power where you need it, and with up to 20 % less fuel consumption and up to 60 % less emissions, when compared to a standard 2 stroke engine. It’s technology that works for you and the environment.

E-Tech® II.Exhaust emissions are reduced to levels below existing and known future requirements without compromising power.


Air Injection™.Unique intake air cleaning for longer operating time.

Low Vib®.Dampeners between the engine and chassis effectively reduce vibrations.

Auto return stop switch.Stop switch automatically resets to the ON position for trouble-free starting.

Mulching function.Mulching knives reduce material and increase bag capacity. 16:1 ratio mulching function.

The Husqvarna blower features glossary.

Vac capable.The blower can be turned into a vacuum to collect debris.

Ergonomic handles.The handle can be angled and has rubber inserts for a stable, comfortable grip.

Adjustable handle.Adjustable handle for superior comfort.

Low Noise.Minimal noise with a gentler tone. The engine, fan housing and insulation reduce noise dramatically.

In-line air outlet.The fan housing is designed so that the air stream is in line with the operator handle. This makes the machine very easy to maneuver.

Ergonomic harness.Comfortable padded harness with load-reducing hip belt.

Fuel pump.Fuel pump designed for very easy starting.

Throttle lock.The throttle lock feature reduces fatigue in the throttle fi nger during long working shifts.

61

www.husqvarna.com

380BFS 370BTS / BFS 356BT / BF 350BT / BF 130BT 125BT 125BVx 125Bx 125B

Displacement, cc 71.9 64.9 51.7 50.2 29.5 25.0 28.0 28.0 28.0Power, hp / kW * 4.4 / 3.3 3.5 / 2.6 3.2 / 2.4 2.1 / 1.6 1.3 / 0.96 1.3 / 0.96 1.1 / 0.8 1.1 / 0.8 1.1 / 0.8Sound pressure level at operator's ear, dB(A) ** / Noise level 15 m ANSI B 175.2 100 / 77 95 / 76 88 / 64 94 / 71 94 / 69 92 / 70 92 / 70 92 / 70 92 / 70Equivalent vibration level (a hv , eq) right handle, m /s² *** 3.4 3.6 3.9 2.2 2.5 1.2 11.1 11.1 11.1Air speed, tube, mph 201 198 177 180 145 140 170 170 170Air fl ow, fan housing, cfm 915 742 766 692 431 385 470 470 470Air fl ow, tube, cfm 685 565 473 494 360 311 425 425 425Weight excl. accessories, lbs 29.5 26.5 22.4 22.5 14.8 13.0 9.4 9.4 9.4 X-Torq® ― ― ― ― ―E-Tech® IISmart Start® ― ― ― ― ― ―Air Injection™ ― ― ― ― ― ― ― ―Low Vib® ― ― ― ― ― ― ―Commercial grade air fi lter ― ― ― ― ― ― ― Auto return stop switch ― ― ― ― ― ―Vac capable ― ― ― ― ― ― ―Vac bag included ― ― ― ― ― ― ― ―Mulching function ― ― ― ― ― ― ―Ergonomic handleAdjustable handle ― ― ―Soft-grip handle ―Low noise ― ― ― ― ― ― ― ―In-line air outlet ― ― ― ― ― ―Ergonomic harness ― ― ―Fuel pumpThrottle lock



TIPS BEFORE BUYING

There are a number of hand-held and backpack blowers to choose from. The handheld blowers are divided into two groups: those with collection and those without. With a blower you can do much more than just move leaves. You can also use it for collecting debris, grass clippings and hedge clippings, etc.

The blower should have an efficient vibration-dampening ■

system to minimize vibrations in those parts of the machine that come in contact with the operator.

The engine should be powerful and easy to start. ■

Visit the Husqvarna web page for our full range of blowers and accessories. Here you’ll find additional advice to help you decide which machine is right for the job you have in mind. For more information regarding your purchase, contact your Husqvarna servicing dealer.


62

Stone, concrete and steel. Power your way through job after job.

63

Husqvarna is a world leader in handheld power cutters. Over the years we have worked hard to improve and develop cutting technologies, always focusing on the needs of our users. Our goal has been to enable our users to get more done, with greater precision and in less time. This goal keeps us ahead of the competition and puts you in control of all your cutting jobs.


64

Performance.The new Active Air Filtration™ is one of the most effi cient air fi ltration systems on the market today, delivering operational times (dry cutting) of about one year, with no fi lter service required.

Effi ciency.SmartCarb™ is our carburetor with a built-in fi lter compensation that adjusts the fuel-air mixture, so the engine maintains maximum power even when the fi lters start to clog.

Ergonomics.Low weight, com pact design and correctly posi tioned handles, plus an outstanding anti-vibration system, make our power cutters easier to handle and reduce fatigue when working long periods.


Latest vibration dampening system. Reduces strain on the user.

Poly V belt. Better transmission for better performance.

65

Durability.Our power cutters are equipped with Poly-V belts that distribute power more effectively and have longer service life than traditional V-belts.

Environment.Our patented, world-leading, 2-stroke X-Torq® technology gives you more power where you need it, but with up to 20 % less fuel consumption and up to 60 % less emissions, when compared to a standard 2 stroke power cutter engine. It’s technology that works for you and the environment.

Longevity.K 760 and K 960 have a patented dust sealed starter unit, Dura Starter™, where the return spring and pulley bearing are sealed.


www.husqvarna.com

X-Torq® efficiency. More power, better fuel economy and greatly reduced emissions.

Active Air Filtration™ with centrifugal air cleaning. Increased product life and reduced service intervals.

66

Husqvarna K 960Husqvarna K 1250

TECHNICAL SPECIFICATIONS K 1250 K 960

Blade diameter, inches 14 / 16 14 / 16

Displacement, cc 119 94

Power, hp / kW * 7.8 / 5.8 6.1 / 4.5

Weight excl. cutting disc, lbs 30.2 / 32.2 23.0 / 23.4

X-Torq® ―

Active Air Filtration™

SmartCarb™

EasyStart decompression valve

DEX, Dust Extinguisher System

Easy adjust blade guard


Work effectively with big cutting jobs from large foundations, structural beams and big pipes

to large roof or wall components. These powerful Husqvarna cutters make light work of them all.

The most powerful power cutters available.The powerful K 1250 has been updated with new features for more effi cient and convenient operation. The vibra-tion dampening system increases operator comfort and reduces handle vibrations. The new Dust Extinguisher System gives a cleaner cut with less water usage.

The K 1250 also has a Poly-V belt for better transmission of power and extended service intervals. The K 960 power cutter offers the additional feature of X-Torq® providing engine technology that ensures great performance time after time.

A FORCE TO BE RECKONED WITH

67

Husqvarna K 760 / K 760 with OilGuard™Husqvarna K 970

TECHNICAL SPECIFICATIONS K 970 * K 760 K 760 with OilGuard™

Blade diameter, inches 12 / 14 / 16 12 / 14 14

Displacement, cc 94 74 74

Power, hp / kW ** 6.4 / 4.8 5.0 / 3.7 5.0 / 3.7

Weight excl. cutting disc, lbs 23.4 / 24.2 / 26.0 20.7 / 21.8 21.8

X-Torq®


SmartCarb™

OilGuard™ ― ―

Airpurge


= Available ― = Not available * Available 2nd quarter 2010. ** Engine power values are as rated by the engine manufacturer. Features glossary and further technical specifications on pages 70 –71.

Take your cutting jobs to a new level with our new generation of Husqvarna power cutters. This powerful handheld range with revolutionary

technology are in a class of their own.

Highly efficient, heavy duty gas-powered cutters.The X-Torq® engine technology enables these cutters to combine powerful output with highly reduced emissions and excellent fuel economy. The engines are quite simply cleaner and more efficient. The efficient vibration dampening system increases operator comfort and reduces handle vibrations to below 5 m/s². They also feature the

new Active Air Filtration™ which delivers improved operational times (dry cutting) by about one year, with no filter service required. And equipped with Poly-V belt these machines offer better power transmission, less tension adjustments and considerably longer product life.

HEAVY DUTY CUTTING POWER

68

Husqvarna K 3000 ElectricHusqvarna K 3000 Wet

TECHNICAL SPECIFICATIONS K 3000 Wet K 3000 Electric

Blade diameter, inches 14 12 / 14

Voltage, V 120 120

Rated output, W* 1800 1800

Weight excl. blade incl 3m cable, lbs 20.7 20.7

Elgard™

SoftStart™

Pulling rotation

Simple blade change

Replaceable arbor bushing

Wet cutting kit ―


These electric power cutters are ideal for rapid and simple cutting, and adjusting

building components, pipes, reinforcing steel and struts on site.

Versatile, easy-to-use electric power cutters.The Husqvarna K 3000 Electric power cutter is one of the market’s most powerful and versatile electric cutters. The machine offers several new cutting possibilities both indoors and outdoors and is ideal for rapid and simple cutting. For use on a variety of building materials, with

features such as Elgard™ overload protection and Electronic SoftStart™, which ensures an easy, smooth start. The new K 3000 Wet does exactly as the name implies. It allows wet cutting for reduced dust flow.

ELECTRICALLY POWERED

69

Make the job more manageable and efficient with one of our cutting trolleys.

With lateral adjustment, straight or curved cutting is no longer a problem.

Efficient and ergonomic floor cutting trolleys.The Husqvarna KV 970 / 1250 and KV 760 are new convenient cutting trolleys specially developed for the power cutters. The trolleys have quick mounts, so installing the cutter is easy. Easy lateral adjustment facilitates cutting in both straight and curved lines. Feature also include a handy cutting depth limiter, making it easier to set the cutting depth, tilt the machine up for transport, and then tilt it down again, to the same cutting depth. The laterally

adjustable wheels facilitate cutting tight against a wall or curb. All trolleys are easy to fold up, for convenient storage and transport. Because of the machine’s anti-vibration system, working with the cutter is practically vibration free. The trolley’s water tank holds 4 gal/17 litres — enough for 15–20 minutes cutting and can easily be removed for fast refilling.

HANDLE POWER EFFICIENTLY

TECHNICAL SPECIFICATIONS KV 960 KV 760

Watertank capacity, gallons 3.3 3.3

Suitable for K 970, K 960 K 760 / K 760 OilGuard™/ K 750

70

TECHNICAL FEATURES

X-Torq®.Our patented, world-leading, 2-stroke X-Torq® technology gives you more power where you need it, but with up to 20 % less fuel consumption and up to 60 % less emissions, when compared to a standard 2 stroke power cutter engine. It’s technology that works for you and the environment.

New Active Air Filtration™.The new Active Air Filtration™ is one of the most effi cient air fi ltration systems on the market, delivering operational times (dry cutting) of about one year, with no fi lter service required.

SmartCarb™.Our carburetors with built in automatic fi lter compensation keep the fuel /air ratio constant so the engine maintains maximum power even when the fi lters start to get clogged.

Air Purge.Air Purge and a decompression valve make the machine extra easy to start.

DuraStarter™.Patented dust sealed starter unit in which the return spring and pulley bearing are totally enclosed which reduces the risk of downtime and increases reliability and service life.

Elgard™.The advanced electronic overload protection warns of approaching overload by varying rotation speed.

SoftStart™.Electronic SoftStart provides starting with normal, slow acting fuses.

Pulling rotation.Reduces the risk of jamming and kick back.

Simple blade change.A built-in quick action lock for the spindle allows for quick and easy blade change.

The Husqvarna gas power cutters glossary.

The Husqvarna electric power cutters glossary.

OilGuard™.OilGuard is a quality oil developed specifi cally for dusty environments like construction sites and is ideal for all air-cooled two-stroke engines.

Poly-V belt.For better power transmission, less frequent retensioning and increased product life.

Sealed transmission.The drive belt on all cutters is totally enclosed making them waterproof and dustproof.

Reversible cutting arm.Allows cutting much closer to the wall or fl oor.

Easy-adjust blade guard.The blade guard is adapted quickly and easily during operation.

DEX, Dust Extinguisher System.Our dust handling system gives you cleaner cutting with reduced water usage.

TIPS BEFORE BUYING

There are a number of handheld power cutters to choose from. There are also trolleys available to make the job less strenuous and more efficient.

Choose a machine based on the type of cutting you need it to do and also the size of the area you need to cover.

Visit the Husqvarna web page for our full range of power cutters, diamond blades and accessories. Here you’ll find additional advice to help you decide which machine is right for the job you have in mind. For more information regarding your purchase, contact your Husqvarna servicing dealer.


71

K 1250 K 960 K 970 * K 760 K 760 with OilGuard™

Blade diameter, inches 14 / 16 14 / 16 12 / 14 / 16 12 / 14 14

Displacement, cc 119 94 94 74 74

Power, hp / kW ** 7.8 / 5.8 6.1 / 4.5 6.4 / 4.8 5.0 / 3.7 5.0 / 3.7

Weight excl. cutting disc, lbs 30.2 / 32.2 23.0 / 23.4 23.4 / 24.2 / 26.0 20.7 / 21.8 21.8

Cutting depth, inches 5 / 6 5 / 6 4 / 5 / 6 4 / 5 4 / 5


SmartCarb™

Air Purge ― ―

EasyStart decompression valve

DuraStarter™

Poly-V belt

X-Torq® ―

OilGuard™ ― ― ― ―

Sealed transmission

Reversible cutting arm

Fuel indicator in the tank ― ―

Easy-adjust blade guard




TECHNICAL SPECIFICATIONS K 3000 Wet K 3000 Electric

Blade diameter, inches 14 12 / 14

Voltage, V 120 120

Rated output, W* 1800 1800

Weight excl. blade incl 3 m cable, lbs 20.7 20.7

Elgard™

SoftStart™

Pulling rotation

Simple blade change


Wet cutting kit ―

= Available ― = Not available * Engine power values are as rated by the engine manufacturer.

www.husqvarna.com

= Available ― = Not available * Available 2nd quarter 2010. ** Engine power values are as rated by the engine manufacturer.

72

Professional mowing equipment. For demanding jobs and tight schedules.

73


Rugged by design, yet precise in handling, Husqvarna zero turn mowers, riders and commercial walk behinds not only offer high levels of productivity, but are engineered to withstand the demands of any mowing job. Cutting edge ergonomics and comfort features provide everything needed to meet the requirements of tough lawn maintenance.

74

Durability.From heavy cast iron spindles on commercial units to rugged tube frames on homeowner mowers, careful consideration is taken to make certain the right components are utilized to ensure consistent quality, durability and customer satisfaction.

Productivity.Through the application of CFD (computational fl uid dynamics) and diligent fi eld testing all over the world, Husqvarna continues advancement and leadership in high cut quality and productivity.

Ergonomics.A comfortable operator is a productive and happy operator. Careful attention to control placement and operator position and interface, provide an intuitive, enjoyable experience.


Leading industry ergonomics. Outstanding performance.

High performance cutting deck. For fast and effective results.

75


Smart design.Simplicity of design and execution allows for better utilization of available space, cleaner access and a service friendly environment.

Cutting edge solutions.Whether its walk behind mowers for sure-footed performance on inclines, large frame zero turn mowers for high commercial productivity or sub-compact zero turn mowers for homeowners requiring extra maneuverability, solutions are available for every application.

Innovation.Capitalizing on opportunities is always at the forefront of design. Finding a better way to do things is a constant focus in developing new, innovative products.

www.husqvarna.com

Commercial quality components.Increased strength for long life.

Low, wide stance. Increased stability.

76

TECHNICAL SPECIFICATIONS PZ7234FX PZ6034FX PZ6029PFX PZ6029FX PZ6030CV PZ5426FX

Chassis type Professional Professional Professional Professional Professional Professional

Engine manufacturer Kawasaki Kawasaki Kawasaki Kawasaki Kohler Kawasaki

Engine type FX921V FX921V FX801 Propane FX801 Command Pro FX730

Power, hp * 34.0 34.0 29.0 29.0 30.0 26.0

Fuel tank volume, gallons 12.0 12.0 Optional dual tanks 12.0 12.0 12.0

Drive system Hydro-Gear 16 cc Hydro-Gear 16 cc Hydro-Gear 16 cc Hydro-Gear 16 cc Hydro-Gear 12 cc Hydro-Gear 16 cc

Cutting system Side discharge Side discharge Side discharge Side discharge Side discharge Side discharge

Cutting width, inches 72 60 60 60 60 54

Optional collector ―


THE ULTIMATE MOWER

The new PZ series is a no compromise commercial zero turn mower designed for the commercial landscape customer. The PZ series represents the latest in high performance drive systems and operator interface, combined with high productivity cutting deck designs

for premium cut quality and clipping dispersal at higher ground speeds. Careful consideration of components and design not only provide extended durability, but unprecedented ease of service access.

Commercial zero-turn mowers for the demanding professional.

Productivity, comfort and durability redefined. The new PZ series raises the bar in the high

performance commercial zero-turn arena.

77

TECHNICAL SPECIFICATIONS LZF6127 iZ5223 iZ4821

Chassis type Large Intermediate Intermediate

Engine manufacturer Kohler Vanguard Kawasaki

Engine type Command V-Twin V-Twin V-Twin

Power, hp * 27.0 23.0 21.0

Fuel tank volume, gallons 11.0 11.0 11.0

Transmission type Hydro-Gear 10 cc / with fans Hydro-Gear 10 cc Hydro-Gear 10 cc

Cutting system Side discharge Side discharge Side discharge

Cutting width, inches 61 52 48

Optional collector


The LZF series mower was designed with the needs of the lawn care professional clearly defined. It combines the wide platform of a larger mower and the low center of gravity of a smaller, more compact design. The iZ mowers are perfectly suited for enhanced productivity in more

challenging areas. These mowers feature many of the strengths of the larger frame mowers built on a more compact chassis. These agile workhorses are tailored to fit any commercial cutter's needs.

Perfect balance for the lawn maintenance professional.

SOLID COMMERCIAL VALUE

Versatility and superior productivity to exceed the demanding needs

of the commercial landscaper.

78

TECHNICAL SPECIFICATIONS MZ6128ZT

Chassis type Mega-size

Engine manufacturer Briggs & Stratton

Engine type Professional Series V-Twin with Electronic Fuel Management

Power, hp * 28.0

Fuel tank volume, gallons 5.2

Transmission type ZT3400 integrated

Cutting system Side discharge

Cutting width, inches 61

Optional collector


Mega-sized mower with pro features.The new MZ series zero turn mower from Husqvarna takes performance, productivity and comfort to a whole new level. The intuitive operator interface, heavy-duty steel frame and commercial rated hydraulic system create the

ultimate mowing experience. With a rugged fabricated steel deck that is mulch and collection capable, the new MZ is practical for all of your property maintenance needs.

THE ULTIMATE MEGA MOWER

This zero-turn mower offers worry-free performance for professional results. The ultimate for large land and estate owners.

79

RUGGED PERFORMANCE

TECHNICAL SPECIFICATIONS EZ5224 EZ4824

Chassis type Estate Estate

Engine manufacturer Kohler Briggs & Stratton

Engine type CourageTwin Endurance V-Twin

Power, hp * 24.0 24.0

Fuel tank volume, gallons 4.0 4.0

Transmission type ZT2800 integrated ZT2800 integrated

Cutting system Side discharge Side discharge

Cutting width, inches 52 48

Optional collector


Rugged performance combined with driver comfort.Designed for larger residential and estate properties, the EZ series incorporates professional features to provide supreme comfort and extended durability. High back seats with standard armrests, extended leg room area, convenient control access and precision dampened controls allow

comfortable, confident operation, while a rugged, steel tube chassis, heavy duty transmissions and premium engines ensure long life. A highly-effective collection system is available as an accessory.

When you want professional results, this zero-turn mower will allow you

to mow like a pro.

80

Zero-turn mowers for the demanding homeowner.For maneuverability, efficiency and convenience in a homeowner zero-turn mower package, the residential series really delivers. True zero-turn mower performance with twin, maintenance free integrated transmissions, heavy-duty front casters and a rugged tube-steel frame.

High performance Air Induction™ cutting decks allow side ejection or optional mulch and collection capability. Convenient control placement, foam padded steering levers and an adjustable seat make these units easy and enjoyable to operate.

HOMEOWNERS WITH BIGGER JOBS

TECHNICAL SPECIFICATIONS RZ5424 RZ4619 RZ4219F RZ4216 RZ3016

Chassis type Residential Residential Residential Residential Residential

Engine manufacturer Kohler Briggs & Stratton Briggs & Stratton Briggs & Stratton Briggs & Stratton

Engine type Courage Twin Professional Professional INTEK INTEK

Power, hp * 24.0 19.5 19.5 16.5 16.5

Fuel tank volume, gallons 3.0 3.0 3.0 3.0 3.0

Transmission type EZT integrated EZT integrated EZT integrated EZT integrated EZT integrated

Cutting system Side discharge Side discharge Side discharge Side discharge Side discharge

Cutting width, inches 54 46 42 42 30

Deck type Stamped Stamped Fabricated Stamped Stamped

Optional collector


Sometimes homeowners need a better solution for their mowing jobs. These zero-turn mowers

offer maneuverability, high performance and efficiency. Did we mention they’re fun to drive?

81

HANDS-ON PERFORMANCE

TECHNICAL SPECIFICATIONS WGE4815 WGP4815 WGE3613 WGP3613 WGP3213

Control type Easy Touch System Pistol Grip Easy Touch System Pistol Grip Pistol Grip

Engine manufacturer Kawasaki Kawasaki Kawasaki Kohler Kohler

Engine type V-Twin V-Twin V-Twin V-Twin Single

Power, hp * 15.0 15.0 13.0 13.0 13.0


Transmission type 5-Speed Belt Drive 5-Speed Belt Drive 5-Speed Belt Drive 5-Speed Belt Drive 5-Speed Belt Drive

Cutting system Side discharge Side discharge Side discharge Side discharge Side discharge


Turning radius None None None None None

Optional collector


The WG series of gear driven walk-behind mowers features a commercial duty 5-speed transmission with a heavy-duty cogged belt wheel drive. Cutting deck, engine and control

choices provide the versatility to tailor a machine to your specific requirements.

Built for simplicity and durability.

The WG series of mowers offers versatility that allows you to complete any job without

compromising quality.

82

PREMIUM WALK BEHIND SOLUTION

The WHF series, the largest of the walk-behind mowers, features an intuitive pistol-style user interface that ensures complete control with minimal hand movement. A Kanzaki tandem style 10 cc pump with independent Parker wheel motors delivers premium performance for walking or

riding behind the mower. With a floating deck system that allows for cutting height changes in seconds, availability of deck sizes up to 61 inches and electric start on larger models, Husqvarna hydro walk behind mowers sets new standards in efficiency.

High productivity and precision control.

The WHF series mowers offer professional productivity and maneuverability at your

fingertips with precise controls and durable construction.

TECHNICAL SPECIFICATIONS WHF6123 WHF5223 WHF4817 WHF3617

Deck type Floating deck Floating deck Floating deck Floating deck

Engine manufacturer Kawasaki Kawasaki Kawasaki Kawasaki

Engine type V-Twin V-Twin V-Twin V-Twin

Power, hp * 23.0 23.0 17.0 17.0

Fuel tank volume, gallons 5.3 5.3 5.3 5.3

Transmission type Pump / Wheel motor Pump / Wheel motor Pump / Wheel motor Pump / Wheel motor

Starter Electric start Electric start Recoil Recoil

Cutting width, inches 61 52 48 36

Control type Pistol Pistol Pistol Pistol

Optional collector


83

OPTIMIZED PRECISION

The WH series of hydro walk behind mowers offers supreme commercial performance, in a rock-solid package. These units feature an industry leading pistol style operator interface, and a Kanzaki tandem pump with Parker wheel motor drive system that is cradle mounted to allow for simplified deck height setting. The rugged fixed deck

design provides the stability and maneuverability to conquer even the most demanding tasks. Balance and weight distribution for hill holding and curb jumping are optimized and structural components are reinforced to provide solid performance over the life of the machine.

Clear cut results with durable equipment.

WH series mowers offer maneuverability and fixed deck designs for the most

demanding applications.

TECHNICAL SPECIFICATIONS WH5217 WH4817 WH3617

Deck type Fixed deck Fixed deck Fixed deck

Engine manufacturer Kawasaki Kawasaki Kawasaki

Engine type V-Twin V-Twin V-Twin

Power, hp * 17.0 17.0 17.0


Transmission type Pump / Wheel motor Pump / Wheel motor Pump / Wheel motor

Starter Recoil Recoil Recoil


Control type Pistol Pistol Pistol

Optional collector


84


Performance.High performance comes from Briggs & Stratton engines – a reliable single-cylinder OHV-engine.

Effi ciency.Front mounted high-capacity cutting decks provide excellent accessibility into corners while the unique articulated steering system allows the rear pair of wheels to swing in underneath the machine. The result is superior maneuverability with a minimum turning radius.

Ergonomics.Pedal-operated hydrostatic transmission and controls ergonomically grouped within easy reach of the driver’s seat. All CombiClip cutting decks can easily be removed or lifted into a maintenance position without tools. Excellent for convenient cleaning and service.


Available All-Wheel-Drive. Maximum traction on slopes and wet surfaces.

Front-mounted cutting deck. Delivers clear driving vision.

Articulated steering.Superior maneuverability with minimal turning radius.

85

CHALLENGING LANDSCAPES

These Riders are ideal for lawns that are difficult to mow. If tough terrain or an abundance

of landscaping slow your mowing progress, this Rider will solve your problems.

Articulating Riders for uneven terrain and irregular shaped lawns.Experience the Husqvarna difference when you drive the articulating mower. The front-mounted cutting deck is ideal for easy accessibility of any hard to reach areas such as corners and under bushes or park benches. The unique articulated steering system allows the rear wheels to pivot underneath the machine resulting in superior

maneuverability around trees, flower beds and other obstacles. The all-wheel drive model allows for increased traction on wet terrain and slopes. The low center of gravity, comfortable seat and ergonomic positioning of the controls create a great mowing experience.

TECHNICAL SPECIFICATIONS RIDER 175 AWD RIDER 175

Engine manufacturer Briggs & Stratton Briggs & Stratton

Engine type INTEK INTEK

Power, hp * 17.5 17.5


Transmission type Hydrostatic All-Wheel Drive Hydrostatic

Cutting system BioClip / Rear ejection BioClip / Rear ejection


All-Wheel-Drive (4 × 4) ―

Maintenance position (cutting deck)


86

TECHNICAL FEATURES AND SPECIFICATIONS

Digital hour meter.The hour meter allows you to maintain service intervals, track daily cutting hours and monitor effi ciency.

Heavy-duty air canister.Canister style air fi lter with pre-fi lter and fi lter for maximum particle capture.

The Husqvarna zero-turn mowers features glossary.

Foldable ROPS.A roll-over protection system (ROPS) for mowing on inclines with the ability to fold down for height reduction, allowing mowing on lower clearance areas.

PZ Premium suspension seat.The suspension seat contains an adjustable spring suspension mounting system to reduce the impact from rough mowing surfaces. An internal elastomeric band also supports the operator for maximum comfort.

8787

TIPS BEFORE BUYING

What to consider before making your choice.The zero-turn mowers and riders are designed for fast and efficient mowing. With heavy-duty construction and high performance engines, these mowers can withstand demanding workloads year after year.

Things to keep in mind when buying a Husqvarna zero-turn mower:

Evaluate your mowing requirements to assure you select the ■

deck width that allows for the most efficient mowing, yet still allows you to mow smaller, more congested areas.

Consider the topography of the property to be mowed. ■

Larger, wider tires have better hill holding capability and put less pressure on the lawn surface. Higher horsepower levels are also more beneficial on sloped surfaces and in mulching applications.

Zero turn radius mowers can be equipped with mulch kits ■

or collection systems to adapt to your cutting needs.

Visit the Husqvarna web page for our full range of zero-turn mowers and accessories. Here you’ll find additional advice to help you decide which machine is right for the job you have in mind. For more information regarding your purchase, contact your Husqvarna servicing dealer.

7 Gauge fabricated deck.A welded steel cutting deck fabricated entirely from 7 gauge steel for extended durability. A 6" deck depth contributes to exceptional cut quality and clipping dispersal.

Flat deck.A welded steel cutting deck fabricated entirely from 10 or 11 gauge steel.

TUNNELRAM™ deck.A welded steel cutting deck fabricated from 10 gauge and 7 gauge steel. The deeper front tunnel increases deck capacity and aids in clipping dispersal.

Husqvarna Rider features glossary.Husqvarna’s articulated steering.The unique articulated steering system allows the rear pair of wheels to swing in underneath the machine. The result is superior maneuverability with a minimum turning radius at full lock.

All-Wheel-Drive (4 × 4).All-Wheel-Drive (AWD) ensures traction on uneven, wet and slippery areas and slopes. AWD automatically adjusts the traction on all wheels depending on situation and ground condition.

Hour meter.With an hour meter, you know when it’s time for service and maintainance.

Maintenance position (cutting deck).Without tools you can quickly lift the cutting deck into the maintenance position, for convenient cleaning and service.

Pivoting rear axle.The rear axle is pivoting to get maximum traction on the drive wheels and a smooth ride also on uneven surfaces.

www.husqvarna.com

88


MZ6128ZT EZ5224 EZ4824 RZ5424 RZ4619 RZ4219F RZ4216 RZ3016 Rider 175 AWD Rider 175

Engine manufacturer Briggs & Stratton Kohler Briggs & Stratton Kohler Briggs & Stratton Briggs & Stratton Briggs & Stratton Briggs & Stratton Briggs & Stratton Briggs & StrattonEngine type Professional V-Twin EFM Courage Twin Endurance V-Twin Courage Twin Professional Twin Professional Twin INTEK INTEK INTEK INTEKDisplacement, cc 810 725 725 725 502 502 465 465 502 502Power, hp * 28.0 24.0 24.0 24.0 19.5 19.5 16.5 16.5 17.5 17.5Air fi ltration system Cartridge OEM Standard OEM Cartridge OEM Standard OEM Standard OEM Standard OEM Standard OEM Standard OEM Standard OEM Standard OEMSpeed min-max, mph 0 – 8 0 – 6.5 0 – 6.5 0 – 6.5 0 – 6.5 0 – 6.5 0 – 6.5 0 – 6.5 0 – 5.5 0 – 5.5Adjustable anti-scalp rollers 3 3 3 4 3 1 0 0 2 2Deck construction 11 gauge fabricated 11 gauge fabricated 11 gauge fabricated 12 gauge stamped 13 gauge stamped 11 gauge fabricated 13 gauge stamped 13 gauge stamped 11 gauge stamped 11 gauge stampedCutting width, inches 61 52 48 54 46 42 42 30 41 41Adjustable cutting height, inches 1.5 – 4.5 1.5 – 4.5 1.5 – 4.5 1.5 – 4.0 1.5 – 4.0 1.5 – 4.0 1.5 – 4.0 1.5 – 4.0 1.5 – 3.5 1.5 – 3.5Blade spindle type Cast aluminum Cast aluminum Cast aluminum Cast aluminum Cast aluminum Cast aluminum Cast aluminum Cast aluminum Cast aluminum Cast aluminumBlades 3 3 3 3 2 3 2 1 3 3Electric clutch 200 ft/lb 150 ft/lb 105 ft/lb 150 ft/lb 105 ft/lb 105 ft/lb ― ― ― ―Hydrostatic pump ZT3400 integrated ZT2800 integrated ZT2800 integrated EZT integrated EZT integrated EZT integrated EZT integrated EZT integrated Tuff Torq integrated Tuff Torq integratedWheel motors, cubic inch ― ― ― ― ― ― ― ― ― ―Front caster tires, inches 13 × 5.00 – 6 11 × 4.0 – 5 11 × 4.0 – 5 11 × 4.0 – 5 11 × 4.0 – 5 11 × 4.0 – 5 11 × 4.0 – 5 11 × 4.0 – 5 11 × 4.0 – 5 11 × 4.0 – 5Rear drive tires, inches 23 × 10.50 –10 20 × 9.50 – 8 20 × 9.50 – 8 18 × 9.50 – 8 18 × 8.50 – 8 18 × 8.50 – 8 18 × 7.50 – 8 18 × 6.50 – 8 16.5 × 6.0 – 8 16.5 × 6.0 – 8Digital hour meter Standard Standard Standard Standard Standard Standard ― ―Seat type Vinyl high back, arm rests Vinyl high back, arm rests Vinyl high back, arm rests Vinyl 15" Vinyl 15" Vinyl 15" Vinyl 15" Vinyl 15" Pan style Pan styleFoldable ROPS (Roll Over Protection) ― ― ― ― ― ― ― ― ―Overall length, inches 76.0 72.0 72.0 75.0 75.0 75.0 75.0 66.5 90.5 90.5Weight, less fuel, lbs 780 645 640 538 485 570 485 395 258 258Fuel capacity, gallons 5.2 4.0 4.0 3.0 3.0 3.0 3.0 3.0 1.8 1.8Productivity, acres/hr** 3.9 2.7 2.5 2.7 2.4 2.2 2.2 1.6 1.8 1.8Optional collector system

= Available ― = Not available * Engine power values are as rated by the engine manufacturer. ** = Productivity (80% efficiency): width of cut x ground speed / 120 = Acres per hour

PZ7234FX PZ6034FX PZ6029PFX PZ6029FX PZ6030CV PZ5426FX LZF6127 iZ5223 iZ4821

Engine Manufacturer Kawasaki Kawasaki Kawasaki Kawasaki Kohler Kawasaki Kohler Briggs & Stratton KawasakiEngine type FX921V FX921V FX801 Propane FX801 Command Pro FX730 V-Twin Vanguard V-TwinPower, hp * 34.0 34.0 29.0 29.0 30.0 26.0 27.0 23.0 21.0

Air filtration system Heavy duty canister Heavy duty canister Heavy duty canister Heavy duty canister Heavy duty canister Heavy duty canister Heavy duty canister Heavy duty canister Heavy duty canisterSpeed min-max, mph 0 – 12 0 – 12 0 – 12 0 – 12 0 – 12 0 – 11 0 – 10 0 – 9.5 0 – 9.5Adjustable anti-scalp rollers 6 5 5 5 5 5 6 6 3Deck construction 7 gauge fabricated 7 gauge fabricated 7 gauge fabricated 7 gauge fabricated 7 gauge fabricated 7 gauge fabricated 10 gauge fabricated TUNNELRAM™ TUNNELRAM™Cutting width, inches 72 60 60 60 60 54 61 52 48Adjustable cutting height, inches 1.0 – 5.0 1.0 – 5.0 1.0 – 5.0 1.0 – 5.0 1.0 – 5.0 1.0 – 5.0 1.5 – 6 1.5 – 5 1.5 – 5Blade spindle type Cast iron, greasable Cast iron, greasable Cast iron, greasable Cast iron, greasable Cast iron, greasable Cast iron, greasable Commercial aluminum, greasable Commercial aluminum, greasable Commercial aluminum, greasableBlades 3 3 3 3 3 3 3 3 3Electric clutch 250 ft/lb 250 ft/lb 250 ft/lb 250 ft/lb 250 ft/lb 175 ft/lb 200 ft/lb 200 ft/lb 200 ft/lbHydrostatic pump Hydro-Gear 16 cc Hydro-Gear 16 cc Hydro-Gear 16 cc Hydro-Gear 16 cc Hydro-Gear 12 cc Hydro-Gear 16 cc Hydro-Gear 10 cc / with fans Hydro-Gear 10 cc Hydro-Gear 10 ccWheel motors, cubic inch 18 cu in motor 18 cu in motor 18 cu in motor 18 cu in motor 18 cu in motor 18 cu in motor Parker TL (15) Parker TL (15) Parker TL (15)Front caster tires, inches 13 x 6.5 – 6, flat free 13 x 6.5 – 6, flat free 13 x 6.5 – 6, flat free 13 x 6.5 – 6, flat free 13 x 6.5 – 6, flat free 13 x 6.5 – 6, flat free 13 x 6.5 – 6 13 x 5 – 6 13 x 5 – 6Rear drive tires, inches 24 x 12 – 12 24 x 12 – 12 24 x 12 – 12 24 x 12 – 12 24 x 12 – 12 24 x 12 – 12 24 x 12 – 12 23 x 9.5 – 12 23 x 8.5 – 12Digital hour meter Standard Standard Standard Standard Standard Standard Standard Standard StandardSeat type PZ Premium suspension PZ Premium suspension PZ Premium suspension PZ Premium suspension PZ Premium suspension PZ Premium suspension Vinyl high-back w armrests Premium suspension Premium suspensionFoldable ROPS (Roll Over Protection) Standard Standard Standard Standard Standard Standard Standard Standard StandardOverall length, inches 82.5 82.5 82.5 82.5 82.5 82.5 82 76.5 76.5Weight, less fuel, lbs 1400 1320 1320 1320 1320 1260 1060 880 870Fuel capacity, gallons 12.0 12.0 Optional dual 33 lb tanks 12.0 12.0 12.0 11.0 11.0 11.0Productivity, acres/hr** 7.0 5.8 5.8 5.8 5.8 4.8 5.0 4.0 3.7Optional collector system ―

89


MZ6128ZT EZ5224 EZ4824 RZ5424 RZ4619 RZ4219F RZ4216 RZ3016 Rider 175 AWD Rider 175

Engine manufacturer Briggs & Stratton Kohler Briggs & Stratton Kohler Briggs & Stratton Briggs & Stratton Briggs & Stratton Briggs & Stratton Briggs & Stratton Briggs & StrattonEngine type Professional V-Twin EFM Courage Twin Endurance V-Twin Courage Twin Professional Twin Professional Twin INTEK INTEK INTEK INTEKDisplacement, cc 810 725 725 725 502 502 465 465 502 502Power, hp * 28.0 24.0 24.0 24.0 19.5 19.5 16.5 16.5 17.5 17.5Air fi ltration system Cartridge OEM Standard OEM Cartridge OEM Standard OEM Standard OEM Standard OEM Standard OEM Standard OEM Standard OEM Standard OEMSpeed min-max, mph 0 – 8 0 – 6.5 0 – 6.5 0 – 6.5 0 – 6.5 0 – 6.5 0 – 6.5 0 – 6.5 0 – 5.5 0 – 5.5Adjustable anti-scalp rollers 3 3 3 4 3 1 0 0 2 2Deck construction 11 gauge fabricated 11 gauge fabricated 11 gauge fabricated 12 gauge stamped 13 gauge stamped 11 gauge fabricated 13 gauge stamped 13 gauge stamped 11 gauge stamped 11 gauge stampedCutting width, inches 61 52 48 54 46 42 42 30 41 41Adjustable cutting height, inches 1.5 – 4.5 1.5 – 4.5 1.5 – 4.5 1.5 – 4.0 1.5 – 4.0 1.5 – 4.0 1.5 – 4.0 1.5 – 4.0 1.5 – 3.5 1.5 – 3.5Blade spindle type Cast aluminum Cast aluminum Cast aluminum Cast aluminum Cast aluminum Cast aluminum Cast aluminum Cast aluminum Cast aluminum Cast aluminumBlades 3 3 3 3 2 3 2 1 3 3Electric clutch 200 ft/lb 150 ft/lb 105 ft/lb 150 ft/lb 105 ft/lb 105 ft/lb ― ― ― ―Hydrostatic pump ZT3400 integrated ZT2800 integrated ZT2800 integrated EZT integrated EZT integrated EZT integrated EZT integrated EZT integrated Tuff Torq integrated Tuff Torq integratedWheel motors, cubic inch ― ― ― ― ― ― ― ― ― ―Front caster tires, inches 13 × 5.00 – 6 11 × 4.0 – 5 11 × 4.0 – 5 11 × 4.0 – 5 11 × 4.0 – 5 11 × 4.0 – 5 11 × 4.0 – 5 11 × 4.0 – 5 11 × 4.0 – 5 11 × 4.0 – 5Rear drive tires, inches 23 × 10.50 –10 20 × 9.50 – 8 20 × 9.50 – 8 18 × 9.50 – 8 18 × 8.50 – 8 18 × 8.50 – 8 18 × 7.50 – 8 18 × 6.50 – 8 16.5 × 6.0 – 8 16.5 × 6.0 – 8Digital hour meter Standard Standard Standard Standard Standard Standard ― ―Seat type Vinyl high back, arm rests Vinyl high back, arm rests Vinyl high back, arm rests Vinyl 15" Vinyl 15" Vinyl 15" Vinyl 15" Vinyl 15" Pan style Pan styleFoldable ROPS (Roll Over Protection) ― ― ― ― ― ― ― ― ―Overall length, inches 76.0 72.0 72.0 75.0 75.0 75.0 75.0 66.5 90.5 90.5Weight, less fuel, lbs 780 645 640 538 485 570 485 395 258 258Fuel capacity, gallons 5.2 4.0 4.0 3.0 3.0 3.0 3.0 3.0 1.8 1.8Productivity, acres/hr** 3.9 2.7 2.5 2.7 2.4 2.2 2.2 1.6 1.8 1.8Optional collector system

= Available ― = Not available * Engine power values are as rated by the engine manufacturer. ** = Productivity (80% efficiency): width of cut x ground speed / 120 = Acres per hour

PZ7234FX PZ6034FX PZ6029PFX PZ6029FX PZ6030CV PZ5426FX LZF6127 iZ5223 iZ4821

Engine Manufacturer Kawasaki Kawasaki Kawasaki Kawasaki Kohler Kawasaki Kohler Briggs & Stratton KawasakiEngine type FX921V FX921V FX801 Propane FX801 Command Pro FX730 V-Twin Vanguard V-TwinPower, hp * 34.0 34.0 29.0 29.0 30.0 26.0 27.0 23.0 21.0

Air filtration system Heavy duty canister Heavy duty canister Heavy duty canister Heavy duty canister Heavy duty canister Heavy duty canister Heavy duty canister Heavy duty canister Heavy duty canisterSpeed min-max, mph 0 – 12 0 – 12 0 – 12 0 – 12 0 – 12 0 – 11 0 – 10 0 – 9.5 0 – 9.5Adjustable anti-scalp rollers 6 5 5 5 5 5 6 6 3Deck construction 7 gauge fabricated 7 gauge fabricated 7 gauge fabricated 7 gauge fabricated 7 gauge fabricated 7 gauge fabricated 10 gauge fabricated TUNNELRAM™ TUNNELRAM™Cutting width, inches 72 60 60 60 60 54 61 52 48Adjustable cutting height, inches 1.0 – 5.0 1.0 – 5.0 1.0 – 5.0 1.0 – 5.0 1.0 – 5.0 1.0 – 5.0 1.5 – 6 1.5 – 5 1.5 – 5Blade spindle type Cast iron, greasable Cast iron, greasable Cast iron, greasable Cast iron, greasable Cast iron, greasable Cast iron, greasable Commercial aluminum, greasable Commercial aluminum, greasable Commercial aluminum, greasableBlades 3 3 3 3 3 3 3 3 3Electric clutch 250 ft/lb 250 ft/lb 250 ft/lb 250 ft/lb 250 ft/lb 175 ft/lb 200 ft/lb 200 ft/lb 200 ft/lbHydrostatic pump Hydro-Gear 16 cc Hydro-Gear 16 cc Hydro-Gear 16 cc Hydro-Gear 16 cc Hydro-Gear 12 cc Hydro-Gear 16 cc Hydro-Gear 10 cc / with fans Hydro-Gear 10 cc Hydro-Gear 10 ccWheel motors, cubic inch 18 cu in motor 18 cu in motor 18 cu in motor 18 cu in motor 18 cu in motor 18 cu in motor Parker TL (15) Parker TL (15) Parker TL (15)Front caster tires, inches 13 x 6.5 – 6, flat free 13 x 6.5 – 6, flat free 13 x 6.5 – 6, flat free 13 x 6.5 – 6, flat free 13 x 6.5 – 6, flat free 13 x 6.5 – 6, flat free 13 x 6.5 – 6 13 x 5 – 6 13 x 5 – 6Rear drive tires, inches 24 x 12 – 12 24 x 12 – 12 24 x 12 – 12 24 x 12 – 12 24 x 12 – 12 24 x 12 – 12 24 x 12 – 12 23 x 9.5 – 12 23 x 8.5 – 12Digital hour meter Standard Standard Standard Standard Standard Standard Standard Standard StandardSeat type PZ Premium suspension PZ Premium suspension PZ Premium suspension PZ Premium suspension PZ Premium suspension PZ Premium suspension Vinyl high-back w armrests Premium suspension Premium suspensionFoldable ROPS (Roll Over Protection) Standard Standard Standard Standard Standard Standard Standard Standard StandardOverall length, inches 82.5 82.5 82.5 82.5 82.5 82.5 82 76.5 76.5Weight, less fuel, lbs 1400 1320 1320 1320 1320 1260 1060 880 870Fuel capacity, gallons 12.0 12.0 Optional dual 33 lb tanks 12.0 12.0 12.0 11.0 11.0 11.0Productivity, acres/hr** 7.0 5.8 5.8 5.8 5.8 4.8 5.0 4.0 3.7Optional collector system ―

www.husqvarna.com

90


WHF6123 WHF5223 WHF4817 WHF3617 WH5217 WH4817 WH3617 WGE4815 WGP4815 WGE3613 WGP3613 WGP3213

Engine Manufacturer Kawasaki Kawasaki Kawasaki Kawasaki Kawasaki Kawasaki Kawasaki Kawasaki Kawasaki Kawasaki Kohler Kohler

Engine type V-Twin V-Twin V-Twin V-Twin V-Twin V-Twin V-Twin V-Twin V-Twin V-Twin Single Single

Power, hp * 23.0 23.0 17.0 17.0 17.0 17.0 17.0 15.0 15.0 13.0 13.0 13.0

Starter Electric Electric Recoil Recoil Recoil Recoil Recoil Recoil Recoil Recoil Recoil Recoil

Cutting width, inches 61 52 48 36 52 48 36 48 48 36 36 32

Adjustable cutting height, inches 1.5–6 1.5–6 1.5–6 1.5–6 1.5–5 1.5–5 1.5–5 1.5–5 1.5–5 1.5–5 1.5–5 1.5–5

Spindle type Tapered, roller Tapered, roller Tapered, roller Tapered, roller Tapered, roller Tapered, roller Tapered, roller Maintenance free Maintenance free Maintenance free Maintenance free Maintenance free

Adjustable anti-scalp rollers 3 3 2 2 ― ― ― ― ― ― ― ―

Deck construction Fabricated Fabricated Fabricated Fabricated Fabricated Fabricated Fabricated Stamped Stamped Stamped Stamped Stamped

Deck material thickness, gauge 10 top / 7 sides 10 top / 7 sides 10 top / 7 sides 10 top / 7 sides 10 10 10 10 10 10 10 10Blade engagement Electric clutch

125 ft/lbElectric clutch






125 ft/lb Manual PTO Manual PTO Manual PTO Manual PTO Manual PTO

Drive system Hydro Hydro Hydro Hydro Hydro Hydro Hydro 5 Speed belt 5 Speed belt 5 Speed belt 5 Speed belt 5 Speed belt

Controls Pistol grip Pistol grip Pistol grip Pistol grip Pistol grip Pistol grip Pistol grip Easy Touch Pistol grip Easy Touch Pistol grip Pistol grip

Speed min-max (fwd /rev), mph 0–7/0–3 0–7/0–3 0–6.5 / 0–3 0–6.5 / 0–3 0–6 /0–3 0–6 /0–3 0–6 /0–3 2–6 / asstd rev 2–6 / asstd rev 2–6 / asstd rev 2–6 / asstd rev 2–6 / asstd rev

Front caster tires, inches 11 x 3.5-5 11 x 3.5-5 11 x 3.5-5 11 x 3.5-5 9 x 3.5-4 9 x 3.5-4 9 x 3.5-4 9 x 3.5-4 9 x 3.5-4 9 x 3.5-4 9 x 3.5-4 9 x 3.5-4

Rear drive tires, inches 20 x 7.5-8 20 x 7.5-8 18 x 7.5-8 18 x 7.5-8 16 x 6.5-8 16 x 6.5-8 16 x 6.5-8 13 x 6.5-6 13 x 6.5-6 13 x 5-6 13 x 5-6 13 x 5-6

Fuel capacity, gallons 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3

Digital hour meter ( ) ( ) ( ) ( ) ( ) ( ) ( ) ― ― ― ― ―

Weight, less fuel, lbs 680 680 660 660 485 485 460 470 470 370 445 370

Length / Width / Height, inches 75 / 65 / 44 75 / 65 / 44 75 / 59 / 44 73 / 47 / 42 75 / 59 / 44 72 / 59 / 44 72 / 47 / 42 66 / 59 / 42 66 / 59 / 42 74 / 43 / 42 74 / 43 / 42 74 / 43 / 42

Productivity, acres / hr** 3.0 3.0 2.8 2.5 2.5 2.5 2.0 2.4 2.4 1.8 1.8 1.8

Catcher, 3 bushel or 5 bushel ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( )

Optional mulch kit

Optional weight kit

= Available ― = Not available ( ) = Accessory * Engine power values are as rated by the engine manufacturer. ** = Productivity (80% efficiency): width of cut x ground speed / 120 = Acres per hour

91


WHF6123 WHF5223 WHF4817 WHF3617 WH5217 WH4817 WH3617 WGE4815 WGP4815 WGE3613 WGP3613 WGP3213

Engine Manufacturer Kawasaki Kawasaki Kawasaki Kawasaki Kawasaki Kawasaki Kawasaki Kawasaki Kawasaki Kawasaki Kohler Kohler

Engine type V-Twin V-Twin V-Twin V-Twin V-Twin V-Twin V-Twin V-Twin V-Twin V-Twin Single Single

Power, hp * 23.0 23.0 17.0 17.0 17.0 17.0 17.0 15.0 15.0 13.0 13.0 13.0

Starter Electric Electric Recoil Recoil Recoil Recoil Recoil Recoil Recoil Recoil Recoil Recoil

Cutting width, inches 61 52 48 36 52 48 36 48 48 36 36 32

Adjustable cutting height, inches 1.5–6 1.5–6 1.5–6 1.5–6 1.5–5 1.5–5 1.5–5 1.5–5 1.5–5 1.5–5 1.5–5 1.5–5

Spindle type Tapered, roller Tapered, roller Tapered, roller Tapered, roller Tapered, roller Tapered, roller Tapered, roller Maintenance free Maintenance free Maintenance free Maintenance free Maintenance free

Adjustable anti-scalp rollers 3 3 2 2 ― ― ― ― ― ― ― ―

Deck construction Fabricated Fabricated Fabricated Fabricated Fabricated Fabricated Fabricated Stamped Stamped Stamped Stamped Stamped

Deck material thickness, gauge 10 top / 7 sides 10 top / 7 sides 10 top / 7 sides 10 top / 7 sides 10 10 10 10 10 10 10 10Blade engagement Electric clutch







125 ft/lb Manual PTO Manual PTO Manual PTO Manual PTO Manual PTO

Drive system Hydro Hydro Hydro Hydro Hydro Hydro Hydro 5 Speed belt 5 Speed belt 5 Speed belt 5 Speed belt 5 Speed belt

Controls Pistol grip Pistol grip Pistol grip Pistol grip Pistol grip Pistol grip Pistol grip Easy Touch Pistol grip Easy Touch Pistol grip Pistol grip

Speed min-max (fwd /rev), mph 0–7/0–3 0–7/0–3 0–6.5 / 0–3 0–6.5 / 0–3 0–6 /0–3 0–6 /0–3 0–6 /0–3 2–6 / asstd rev 2–6 / asstd rev 2–6 / asstd rev 2–6 / asstd rev 2–6 / asstd rev

Front caster tires, inches 11 x 3.5-5 11 x 3.5-5 11 x 3.5-5 11 x 3.5-5 9 x 3.5-4 9 x 3.5-4 9 x 3.5-4 9 x 3.5-4 9 x 3.5-4 9 x 3.5-4 9 x 3.5-4 9 x 3.5-4

Rear drive tires, inches 20 x 7.5-8 20 x 7.5-8 18 x 7.5-8 18 x 7.5-8 16 x 6.5-8 16 x 6.5-8 16 x 6.5-8 13 x 6.5-6 13 x 6.5-6 13 x 5-6 13 x 5-6 13 x 5-6

Fuel capacity, gallons 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3

Digital hour meter ( ) ( ) ( ) ( ) ( ) ( ) ( ) ― ― ― ― ―

Weight, less fuel, lbs 680 680 660 660 485 485 460 470 470 370 445 370

Length / Width / Height, inches 75 / 65 / 44 75 / 65 / 44 75 / 59 / 44 73 / 47 / 42 75 / 59 / 44 72 / 59 / 44 72 / 47 / 42 66 / 59 / 42 66 / 59 / 42 74 / 43 / 42 74 / 43 / 42 74 / 43 / 42

Productivity, acres / hr** 3.0 3.0 2.8 2.5 2.5 2.5 2.0 2.4 2.4 1.8 1.8 1.8

Catcher, 3 bushel or 5 bushel ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( )

Optional mulch kit

Optional weight kit

www.husqvarna.com

92

Accessible, comfortable, enjoyable tractors that do more than just cut grass.

93


With a tractor from Husqvarna you can cut your lawn quickly, and with first class results, using the cutting method best suited to your lawn. Our ergonomically designed tractors provide an easy and comfortable ride thanks to well placed controls and premium seats. And Husqvarna's wide range of accessories can turn your tractor into a multi-functional lawn and garden machine for versatile use all year long.

94

Performance.These powerful machines include premium features and provide excellent performance and fi rst-class cutting results. Their versatility makes them ideal for year round use.

Effi ciency.Equipped with superior mowing decks, our LS series tractors feature heavy-duty fabricated steel cutting decks. All tractors have mulching, collection and side discharge capabilities. Our wide range of accessories ensures our tractors are useful all year long.

Ergonomics.Husqvarna tractors provide a comfortable driver’s position with easy-to-reach levers and controls. The wide step-through, adjustable 15" high back seat and comfort grip steering wheel provide fi rst-class ergonomics. A hydrostatic transmission also makes operation easier, more precise and more enjoyable.


Reliable, durable engines. Premium power from a top performer.

Wide range of accessories. Adapts for year round work.

Ergonomic driver’s position.For a comfortable ride.

95


Maneuverability.Husqvarna tractors offer a variety of transmissions for every need. Choose pedal or lever operated, based on your preference. You can also choose between standard hydro for everyday use, fast-hydro for faster transport speeds or locking differential for better traction in adverse conditions.

Durability.All Husqvarna tractors are equipped with powerful Briggs & Stratton or Kohler engines featuring overhead valves, full pressure engine lubrication and easy access oil fi lters. These tractors are also built on an 11 gauge steel chassis, ensuring maximum durability and sturdiness. Our LS series tractors also feature heavy-duty fabricated steel decks.

Safety.All our tractors have a Reverse Operating System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless the ignition key is placed in the (ROS) "on" position.

Versatile cutting options. Ensures cutting efficiency for all types of lawn conditions.

Hydrostatic transmission. Optimizes speed and provides excellent driving comfort.

www.husqvarna.com

96

TECHNICAL SPECIFICATIONS GTH27V52LS GTH26V48LS


Engine type Endurance V-Twin Endurance V-Twin

Power, hp * 27.0 26.0

Fuel tank volume, gallons 4.0 with reserve 4.0 with reserve

Transmission type Fast Hydrostatic (pedal) Fast Hydrostatic (pedal)

Tire size, front / rear, inches 16 × 6.5 / 23 × 10.5 16 × 6.5 / 23 × 10.5

Deck type Fabricated Fabricated

Cutting system Collection, mulch, side discharge Collection, mulch, side discharge


Anti-scalp wheels 4 4

Pedal-operated hydrostat

Cruise control

Bumper


With fast transport speeds, cruise control and a smooth ride, these tractors are the premium when mowing large property areas.

THE BIG GARDEN TRACTORS

Side discharge garden tractors withhigh-capacity engines.Our LS series garden tractors with side discharge are ideal for large properties. They feature wide cutting decks, extra heavy-duty chassis, first-class ergonomics and a Briggs & Stratton engine with full pressure lubrication. Both models feature a hi-speed hydrostatic transmission for superior

transport speeds, as well as cruise control and extra large rear tires for a smoother ride. The extremely durable fabricated cutting deck provides long life and consistent results. Paired with one of our many accessories, these tractors are useful for more than cutting grass.

97

TECHNICAL SPECIFICATIONS YTH24V48LS YTH23V42LS YTH22V42LS

Engine manufacturer Briggs & Stratton Briggs & Stratton Briggs & Stratton

Engine type Endurance V-Twin Vanguard Endurance V-Twin

Power, hp * 24.0 23.0 22.0

Fuel tank volume, gallons 4.0 with reserve 4.0 with reserve 3.0

Transmission type Hydrostatic with locking differential Hydrostatic with locking differential Hydrostatic (pedal)

Tire size, front / rear, inches 15 × 6 / 20 × 10 15 × 6 / 20 × 10 15 × 6 / 20 × 10

Deck type Fabricated Fabricated Fabricated

Cutting systems Collection, mulch, side discharge Collection, mulch, side discharge Collection, mulch, side discharge


Anti-scalp wheels 4 2 2

Pedal operated hydrostat

Cruise control

Bumper


These first rate, robust tractors were built with style and comfort for discerning landowners. For cutting grass on slopes and for large acreages, you can't get any better than our models with locking differential.

EFFICIENCY AROUND THE HOUSE

We developed our LS series yard tractors with the discrimi-nating landowner in mind. Engineered for added durability, comfort, style and precision, our LS series yard tractors all feature fabricated decks and a heavy-duty chassis. The

effi cient, integrated washout port and optional mulch kit make these models ideal for demanding and extensive use. Two of our models feature a locking rear differential for increased traction while cutting wet grass or on slopes.

Multi-task with our LS series yard tractors.

98

TECHNICAL SPECIFICATIONS LGT25K54

Engine manufacturer Kohler

Engine type Courage V-Twin

Power, hp * 25.0

Fuel tank volume, gallons 4.0

Transmission type Hydrostatic (lever)

Tire size, front / rear, inches 16 × 6.5 / 22 × 9.5

Cutting system Collection, mulch, side discharge


Anti-scalp wheels 4

Fender-mounted cutting height adjustment

Hour meter with service minder

Adjustable, sliding seat

= Available ― = Not available ( ) = Accessories * Engine power values are as rated by the engine manufacturer. Features glossary and further technical specifications on pages 102 –105.

This tractor is the true work horse of your lawn and garden. Ideal for homeowners that are looking for a high-capacity, versatile tractor.

HARD WORKER AROUND THE HOME

The LGT is a highly capable garden tractor built with smart ergonomics and a powerful design. Powered by an efficient Kohler engine with full pressure lubrication, these residential side discharge tractors can be made collection or mulch capable. Other attachable acessories enhance

versatility, making these tractors year-round work horses for clearing snow, raking thatch or sweeping driveways. This model also features a hydrostatic transmission for smooth, easy operation that makes doing yardwork more enjoyable.

Efficient lawn and garden tractor that exceeds your expectations.

These compact tractors are perfect for homeowners looking for a smaller yet ergonomic tractor to get the job done right. They are ideal for maneuvering around difficult landscapes and tight spaces.

99

TECHNICAL SPECIFICATIONS YTH24V54 YTH23V48 YTH22V42 YTH21K46 YTH2042

Engine manufacturer Briggs & Stratton Briggs & Stratton Briggs & Stratton Kohler Briggs & Stratton

Engine type Intek V-Twin Intek V-Twin Intek V-Twin Courage Single Intek Single

Power, hp * 24.0 23.0 22.0 21.0 20.0


Transmission type Hydrostatic (pedal) Hydrostatic (pedal) Hydrostatic (pedal) Hydrostatic (pedal) Hydrostatic (lever)

Tire size, front / rear, inches 15 × 6 / 20 × 8 15 × 6 / 20 × 8 15 × 6 / 18 × 9.5 15 × 6 / 18 × 9.5 15 × 6 / 18 × 9.5


Collection, mulch, side discharge





Anti-scalp wheels 4 4 2 2 2


Hour meter with service minder

Cruise control

= Available ― = Not available ( ) = Accessories * Engine power values are as rated by the engine manufacturer. Features glossary and further technical specifications on pages 102 –105.

Husqvarna’s yard tractors offer premium performance with quality results. Their compact size makes them easy to maneuver and require less space for storage. Features such as fender-mounted cutting height adjustment, adjustable seat and an ergonomic steering wheel make these tractors simple and comfortable to operate. All tractors feature

hydrostatic transmissions for smooth, variable forward and reverse speed. Our Air Induction™ mowing technology improves airfl ow within the deck, ensuring a clean, consistent cut every time. For added versatility, all models can be equipped with a range of towable accessories, and mulch kit for effi cient lawn fertilization.

KEEPS LAWNS TIDY

Compact yard tractors with big results.

Husqvarna YTH24V54 Husqvarna YTH22V42 / YTH21K46 / YTH2042Husqvarna YTH23V48

100

HDC Dump cart.Extra heavy duty 16 gauge construction.12"x 30"x 48" bed holds 10 cubic feet. Dump lever and removable tailgate. Other carts available.

Dozer blade.48" width by 16" height welded reinforced blade for dozing dirt, rock, sand or snow. Heavy duty adjustable and replaceable skid shoes. Blade angles left or right up to 30°. Wheel weights and tire chains recommended. Fits garden tractors.

Front mount dethatcher.De-thatch a 40" swath and clean it up by using a bagger at the same time. All steel construction. 10 double spring tines (20 teeth).

Front scoop.Easily hauls loose dirt, mulch or rock for those small or large yard jobs. Lift, lower and dump all from the tractor seat with easy to reach ergonomic handles. 200 lb. load capacity. Tire chains and wheel weights recommended. 36"w x 14"L x 12"H.

Poly dump cart.10 cu. ft. Poly cart can be quickly converted to push or tow in seconds. One Piece Poly bed - 350 Mil. material spec. 500 lb. load capacity. 16" x 6.5" turf tread tires. 1 inch diameter axle.

Spreaders.Tow-behind broadcast spreader with 8' to 10' spread pattern, easy fl ow control adjustment and enclosed gear box. 10" x 4" pneumatic tires. Hitch pin included. 12,000 sq. ft. coverage area.

Two-stage snow thrower.Effi cient, belt-driven snow thrower that attaches to the front of the tractor. The ejector chute can be rotated 180° from the tractor seat. Must be used with snow chains and counterweight.

Snow blade.One time mounting bracket installation. Blade angles left or right up to 30 degrees. Adjustable and replaceable skid shoes. Yellow dichromate hardware resists rust.

Premium lawn sweeper.Notched height adjustment changeable from tractor seat. 14 gauge welded housing, 17 cu. ft. hopper capacity, (6) 12" diameter brushes. Large aluminum wheels with bar type tread. Hitch pin included.

ACCESSORIES

Visit the Husqvarna web page for our full range of accessories. Here you’ll find advice on which part is right for your machines. You’ll also find a range of professional work and safety wear designed with your job in mind.

101

husqvarna.us

Seat cover.Add extra comfort to your seat and protects your seat against weather and UV damage. Handy back tool and gear pockets. Fits riding tractors and seat backs up to 15" high.

Snow chains.Provides good traction when clearing snow.

Counterweight.Counterweight for improved grip and accessibility. Weight 55 lbs.

ACCESSORIES

Collector."Soft" bin baggers in 2 bin / 6 bushel or 3 bin / 9 bushel capacity.

Mulch kit.The mulch kit is required to convert tractors, with Air Induction™ decks, to mulching units. Consists of a mulch plate, set of mulching blades and mounting hardware.

Sun shade.Lightweight, attractive sun shade provides protection from sun & heat. Assembles in under 30 min. Can be used with a bagger.

Cover.Full size cover. Made in water resistant nylon. Adjustable drawstring at the lower part plus ventilation holes.

Bumper.The LS brush guards’ heavy duty automotive styling and welded construction protects your tractor from accidental damage. One piece, easy to install and allows access to hood. Molded end caps.

Armrest kit.For a more comfortable driver’s position.

Snowcab.Tractor cab protects operator from wind and snow, keeping you warm and dry. Sturdy steel tube frame with corrosion resistant fi nish. Quick, easy installation.

Note: For Husqvarna tractors, CE approval only applies when original accessories (including the accompanying instructions) and original spare parts are used. For recommended driving instructions on hilly terrain, please see the appropriate tractor instruction manual. Note also that the product range can vary from market to market.

www.husqvarna.com

102

TECHNICAL FEATURES

The Husqvarna garden tractor features glossary.

Advanced engine technology.All of our tractors are equipped with powerful, high-specifi cation overhead valve engines from Kohler or Briggs & Stratton featuring full pressure lubrication and oil fi lter.

Versatile cutting options.With the help of various accessories, our tractors can be converted to different cutting systems. In addition to the side discharge system that comes standard with your tractor, 2-bin and 3-bin baggers, as well as mulching kits, are available.

Hydrostatic transmission.All tractor models come standard with a hydrostatic transmission that produces a smooth, variable forward and reverse speed with the aid of pedals or fender shift levers. Some models have a ground engaging hydrostatic transmission for greater towing capabilities or a locking differential for better traction on slopes and wet grass.

HY Fast hydrostatic transmission.Provides for transport speeds up to 8 mph.

Cruise control.A convenient, effi cient function that ensures the tractor keeps an even speed, even if the lawn is undulating or sloping.

Comfort steering wheel.Our steering wheels are engineered for ergonomics and comfortable use. The LS tractor series feature a more "sporty" steering wheel for the discriminating landowner.

Ergonomic, adjustable, sliding seat.Adjustable while seated; seat moves forward and down, or backwards and up. LS tractor models feature 15" high back seats.

Step-through chassis design.Ensures comfortable and easy mounting and dismounting.

Large, wide rear tires.Minimum 20" x 10" rear tires on the LS models enhance stability and provide a solid foundation for towing accessories.

Fuel level window.The fuel level window lets you see the remaining fuel at a glance.

103

TECHNICAL FEATURES

Cup holder.Convenient cup holder for refreshments during operation.

Hour meter with service minder.Indicates when it’s time to service your tractor.

Headlights.Makes the tractor more visible and allows you to work when it’s dark.

Electric engagement of cutting blade / s.Easy engagement of cutting blade /s; simply pull the switch on the control panel. Available on all LS models and all yard tractors with 48" or larger decks.

Fender-mounted cutting height adjustment.Easily accessible cutting height adjustment for improved ergo nomics. The spring-assisted cutting deck makes adjustment easier.

Anti-scalp wheels and front roller.All cutting decks are equipped with anti-scalp wheels and sometimes also a front roller. These reduce the risk of scalping when cutting uneven lawns.

Bumper.Protects the front of the tractor effectively.

Air Induction™.Blades draw clean air from the top of the deck, as well as below, improving air fl ow and increasing grass lift. The result is a smoother, more consistent cut and better grass clipping discharge.

Cast iron front axle.Heavy cast iron front axle provides superior strength, stability and durability.

Pivoting front axle.Ensures good balance and excellent driving comfort.

Water hose connection.Facilitates cleaning of the cutting deck. Attach the hose, turn on the water and start the engine and you will get a cleaner deck. For optimum results, clean the tractor directly after usage.

Collector.Our large and effective collectors are perfect for collecting leaves as well as grass. The integrated collectors are easily emptied from the driver’s seat.

Defl ector.The GT, YT and LT tractors have side ejection defl ectors as standard.

12-volt power charger.Most models feature a 12-volt battery charger for charging electrical accessories such as cell phones and MP3 players.

TIPS BEFORE BUYING

What to consider before making your choice.The larger and more open the grass areas, the more important for the tractor to have a generous cutting width. If the area has lots of obstructions like trees and bushes, it’s more important that the cutting width is small enough for the tractor to move through the tightest passages.

When mowing high and coarse grass, the most effective ■

cutting deck is the side ejection type.

By using different types of accessories our tractors can be ■

adapted for collection, mulch and ejection to suit your lawn type and mowing habits.

A tractor with a hydrostatic transmission is much easier ■

to operate than a tractor with manual transmission. With manual transmission you have to stop the tractor each time you change gears.

For maximum comfort, choose a tractor with pedal- ■

operated transmission, where speed and direction are controlled by separate pedals for forward and reverse.

A tractor equipped with a wide range of accessories offers ■

versatility all year round. Adding a trailer will make working in the yard easier.

Visit the Husqvarna web page for our full range of garden tractors. Here you’ll find additional advice to help you decide which machine is right for the job you have in mind. For more information regarding your purchase, contact your Husqvarna servicing dealer.

www.husqvarna.com

104

GTH27V52LS GTH26V48LS YTH24V48LS YTH23V42LS YTH22V42LS LGT25K54 YTH24V54 YTH23V48 YTH22V42 YTH21K46 YTH2042

Engine manufacturer Briggs & Stratton Briggs & Stratton Briggs & Stratton Briggs & Stratton Briggs & Stratton Kohler Briggs & Stratton Briggs & Stratton Briggs & Stratton Kohler Briggs & Stratton

Engine type Endurance V-Twin Endurance V-Twin Endurance V-Twin Vanguard Endurance V-Twin Courage V-Twin Intek V-Twin Intek V-Twin Intek V-Twin Courage Single Intek Single

Power, hp * 27.0 26.0 24.0 23.0 22.0 25.0 24.0 23.0 22.0 21.0 20.0

Battery capacity, Ah 28 28 28 28 28 28 28 28 28 28 28

Fuel tank volume, gallons 4.0 with reserve 4.0 with reserve 4.0 with reserve 4.0 with reserve 3.0 4.0 3.0 3.0 2.5 2.5 2.5

Transmission type Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic

Transmission manufacturer Hydro-Gear Hydro-Gear Tuff Torq Tuff Torq Tuff Torq Tuff Torq Tuff Torq Tuff Torq Tuff Torq Tuff Torq Tuff Torq

Locking differential ― ― ― ― ― ― ― ― ―

Tire size, front / rear, inches 16 × 6.5 / 23 × 10.5 16 × 6.5 / 23 × 10.5 15 × 6 / 20 × 10 15 × 6 / 20 × 10 15 × 6 / 20 × 10 16 × 6.5 / 22 × 9.5 15 × 6 / 20 × 8 15 × 6 / 20 × 8 15 × 6 / 18 × 9.5 15 × 6 / 18 × 9.5 15 × 6 / 18 × 9.5

Turning radius, inches 18 18 16 16 16 18 16 16 16 16 16

Wheelbase, inches 121 121 121 121 121 119 119 119 119 119 119












Cutting width, inches 52 48 48 42 42 54 54 48 42 46 42

Cutting height, inches 1.0 – 4.0 1.0 – 4.0 1.0 – 3.5 1.0 – 3.5 1.0 – 3.5 1.0 – 4.0 1.0 – 4.0 1.0 – 4.0 1.0 – 4.0 1.0 – 4.0 1.0 – 4.0

Number of cutting height steps 7 6 6 6 6 6 6 6 6 6 6

Fully pressure-lubricated engine

Oil pump

Oil fi lter

Hydrostatic transmission

Pedal-operated hydrostat ― ―

Cruise control

Ergonomic steering wheel

Comfort seat ― ― ― ― ― ― ― ― ― ―

Premium seat ― ― ―

Premium seat with armrests ― ― ― ― ― ― ― ― ―


Step-through

Large, wide rear tires ― ― ―

Extra large fuel tank ― ― ― ― ― ―

Fuel level window ― ― ―

Cup holder

Hour meter with service minder ―

Headlights

Electric engagement of cutting blade / s ― ― ―


Anti-scalp wheels 4 4 4 2 2 4 4 4 2 2 2

Front roller ― ― ―

Bumper ( ) ( ) ( ) ( )

Air Induction™

Cast iron front axle

Pivoting front axle

Water hose connection

Collector ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( )

Defl ector

Mulch kit ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( )

= Available ― = Not available ( ) = Accessories * Engine power values are as rated by the engine manufacturer.


105

GTH27V52LS GTH26V48LS YTH24V48LS YTH23V42LS YTH22V42LS LGT25K54 YTH24V54 YTH23V48 YTH22V42 YTH21K46 YTH2042

Engine manufacturer Briggs & Stratton Briggs & Stratton Briggs & Stratton Briggs & Stratton Briggs & Stratton Kohler Briggs & Stratton Briggs & Stratton Briggs & Stratton Kohler Briggs & Stratton

Engine type Endurance V-Twin Endurance V-Twin Endurance V-Twin Vanguard Endurance V-Twin Courage V-Twin Intek V-Twin Intek V-Twin Intek V-Twin Courage Single Intek Single

Power, hp * 27.0 26.0 24.0 23.0 22.0 25.0 24.0 23.0 22.0 21.0 20.0

Battery capacity, Ah 28 28 28 28 28 28 28 28 28 28 28

Fuel tank volume, gallons 4.0 with reserve 4.0 with reserve 4.0 with reserve 4.0 with reserve 3.0 4.0 3.0 3.0 2.5 2.5 2.5

Transmission type Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic

Transmission manufacturer Hydro-Gear Hydro-Gear Tuff Torq Tuff Torq Tuff Torq Tuff Torq Tuff Torq Tuff Torq Tuff Torq Tuff Torq Tuff Torq

Locking differential ― ― ― ― ― ― ― ― ―

Tire size, front / rear, inches 16 × 6.5 / 23 × 10.5 16 × 6.5 / 23 × 10.5 15 × 6 / 20 × 10 15 × 6 / 20 × 10 15 × 6 / 20 × 10 16 × 6.5 / 22 × 9.5 15 × 6 / 20 × 8 15 × 6 / 20 × 8 15 × 6 / 18 × 9.5 15 × 6 / 18 × 9.5 15 × 6 / 18 × 9.5

Turning radius, inches 18 18 16 16 16 18 16 16 16 16 16

Wheelbase, inches 121 121 121 121 121 119 119 119 119 119 119












Cutting width, inches 52 48 48 42 42 54 54 48 42 46 42

Cutting height, inches 1.0 – 4.0 1.0 – 4.0 1.0 – 3.5 1.0 – 3.5 1.0 – 3.5 1.0 – 4.0 1.0 – 4.0 1.0 – 4.0 1.0 – 4.0 1.0 – 4.0 1.0 – 4.0

Number of cutting height steps 7 6 6 6 6 6 6 6 6 6 6

Fully pressure-lubricated engine

Oil pump

Oil fi lter

Hydrostatic transmission

Pedal-operated hydrostat ― ―

Cruise control

Ergonomic steering wheel

Comfort seat ― ― ― ― ― ― ― ― ― ―

Premium seat ― ― ―

Premium seat with armrests ― ― ― ― ― ― ― ― ―


Step-through

Large, wide rear tires ― ― ―

Extra large fuel tank ― ― ― ― ― ―

Fuel level window ― ― ―

Cup holder

Hour meter with service minder ―

Headlights

Electric engagement of cutting blade / s ― ― ―


Anti-scalp wheels 4 4 4 2 2 4 4 4 2 2 2

Front roller ― ― ―

Bumper ( ) ( ) ( ) ( )

Air Induction™

Cast iron front axle

Pivoting front axle

Water hose connection

Collector ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( )

Defl ector

Mulch kit ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( )



106106

Specialty turf equipment to rejuvenate your lawn.

107


Our rugged, durable line of turf care equipment is engineered to exceed your expectations. The product line includes dethatchers, seeders, aerators, sod cutters, bed edger and stump grinders. Each series has welded, heavy-duty designs, powerful engines and a compact size. Ergonomic and innovative features provide the platform for machines that you can depend on year after year.

108


Ergonomically designed. Keeps the running smooth and the handling easier.

Performance.Every part in these machines has been chosen to give the maximum results required of them. These are hard working machines that need to stand up to tough conditions. From this range you can expect only the best.

Effi ciency.Results come from using the best equipment for the job. They also come from equipment you can rely on. This range is not just effective, it will assist you in the most effi cient way to help increase your productivity.

Ergonomics.From reduced vibration to ergonomically designed handles. You won’t fi nd a range better equipped to manage those really tough jobs.

109


Powerful Honda or Briggs & Stratton

engines. Compact machinery that packs a punch.

Operator friendly. Reduced vibration and handle locations helps to take the strain.

Durability.Every machine in this range is designed with the benefits of good ground work in mind and carefully designed for hard working performance year after year.

Environment.We work continually to reduce any environmental impacts our products might have. With low fuel emissions and battery operated machines you too can do your part.

Safety.Safety is always top of mind when it comes to any type of power equipment. You can be assured that all machines and compenents are put through the most rigorous of tests.

www.husqvarna.com

110110

LEADING PERFORMANCE

An exclusive four-wheel drive transmission, low center of gravity and the anti-vibration handle make the SC18 the smoothest and most stable sod cutter on the market. Users will appreciate its two cutting speeds, two

transporting speeds and power reverse, as well as the simplified depth setting control that adjusts effortlessly. The efficient design simplifies service and maintenance with fewer parts.

Sod cutter with unique 4-wheel drive.

TECHNICAL SPECIFICATIONS SC18

Type of use Commercial / Rental

Engine manufacturer Honda

Engine type GX

Power, hp * 5.5

Operating width, inches 18.0

Depth adjustment, inches Variable up to 2.5

Transmission 2 cutting speeds, 2 transport, 1 reverse

Clutch mechanism Centrifugal, throttle controlled

Wheels 10" semi pneumatic

Weight (less fuel), lbs 328

* Engine power values are as rated by the engine manufacturer. Further technical specifications on pages 116 –117.

Our durable, high traction sod cutter delivers the precise cut you need for any sod removal project.

111

CUTTING EDGE PERFORMANCE

Husqvarna's 4-in-1 professional bed edger is perfect for shaping landscape beds, or installing edging, pet fencing, landscape lighting, paver bricks and landscape ties. The BE550 features a 5.5 horsepower Honda engine with chain drive system and centrifugal oil bath clutch for premium

performance and durability. This compact machine packs a powerful punch and makes light work of tough landscape projects with the standard bedshaper blade. Optional attachments include cable blade, cable layer shield and paver blade.

Bed edger with commercial capacity.

TECHNICAL SPECIFICATIONS BE550



Engine type GX

Power, hp * 5.5

Cut depth, inches 2 – 4

Cutter wheel Tungsten carbide tipped


Construction Welded 7 gauge steel

Wheels 9" pneumatic, smooth tread



This highly versatile edger will take care of the most difficult landscape edging needs in a

fraction of the time it would take to do by hand.

112112

RAPID STUMP REMOVAL

This well-balanced, maneuverable machine provides commercial power and high productivity. The new cutting system provides sharper, faster cutting due to reduced weight and a unique cutting tooth design. Cutting teeth are available for various soil conditions and feature three independent edges to effectively triple the life of the tooth.

The teeth can be rotated in a matter of seconds using a common wrench. The machine’s stability, balance and adjustable handle allow you to grind objects up to 12" below the ground while maintaining a comfortable and safe working stance throughout the stump grinding job.

Powerful stump grinder that’s light and compact.

TECHNICAL SPECIFICATIONS SG13



Power, hp * 13.0

Cut depth, inches, with adjustable handle 12.0


Clutch mechanism Centrifugal clutch

Construction Welded 7 gauge steel

Wheels 12" pneumatic, knobby tread



For quick and complete stump removal, there’s no better way than the Husqvarna

commercial-duty stump grinder.

113

TURF RENOVATION

With a modular design, the Husqvarna dethatchers offer incredible versatility and productivity. The rugged commercial construction provides the power and precision to get the job done right. The base platform can be combined with optional reels and bagger to offer versatility for every application. Standard flail blade efficiently removes matted thatch with centrifugal force. Other accessories

include delta blades, spring tines and a 5 bushel bag for simple and efficient cleanup. The SD22 seeder is well-balanced and easily portable due to the simple folding handle design. The 30-lb capacity polymer hopper on the SD22 seeder features a site window and is mounted at the rear to ensure good visibility and minimal seed damage during overseeding.

Lawn renovation made simple and easy.

TECHNICAL SPECIFICATIONS DT22 DT18 SD22

Type of use Commercial / Rental Commercial / Rental Commercial / Rental

Engine manufacturer Briggs & Stratton or Honda Briggs & Stratton Briggs & Stratton or Honda

Power, hp * 5.5 5.5 5.5

Operating width, inches 22.0 18.0 22.0

Adjustable depth adjustment

Clutch mechanism V-belt, spring loaded idler V-belt, spring loaded idler V-belt, spring loaded idler

Tine type Flail Flail Delta

Seed hopper capacity, lbs ― ― 30.0

Optional 5 bushel catcher bag ―

= Available ― = Not available * Engine power values are as rated by the engine manufacturer. Further technical specifications on pages 116 –117.

Count on these dependable machines to improve the health

and appearance of any turf.

114

These self-propelled models feature free-wheeling outer tines for better maneuverability around corners and tight areas with less turf damage. Additional side weights allow for improved soil penetration and are removeable for

reduced effort when lifting or for altering weight balance on slopes and inclines. A folding operator handle, lift handles and semi-pneumatic front tire allow for easy transport and storage.

Compact, efficient self-propelled aerators.

EASY LAWN REJUVENATION

Husqvarna aerators give you precise, consistent control of coring depth and pattern resulting in healthy, lush turf

that is more drought resistant.

TECHNICAL SPECIFICATIONS AR25 AR19 AR19

Type of use Commercial / Rental Commercial / Rental Commercial / Rental

Engine manufacturer Honda Honda Briggs & Stratton

Power, hp * 4.0 4.0 5.5

Aerating width, inches 25.0 19.0 19.0

Aerating depth, inches variable up to 3.0 variable up to 3.0 variable up to 3.0

Clutch mechanism V-belt spring loaded idler V-belt spring loaded idler V-belt spring loaded idler

Tine quantity 42 30 30

Coring tines, inches 3/4 3/4 3/4

Weight (less fuel), lbs 422 288 288


115

The towable aerators have the capacity to aerate up to four acres per hour. Two independent tine rotors with 32 or 40 interchangeable closed spoon tines provide superior maneuverability around corners and tight areas. Optional

weight containers allow you to adjust the weight to ensure optimal soil penetration. Rear mounted tip wheels allow the unit to pass through narrow openings.

Tow-behind hollow-tine aerator with high capacity.

HIGH CAPACITY AERATING

Ideal for commercial areas and large residences. These rugged aerators offer years of low maintenance productivity.

TECHNICAL SPECIFICATIONS TA48 TA36

Type of use Landowner / Rental Landowner / Rental

Engine manufacturer ― ―

Power, hp * Tow behind tractor / min. 16 hp Tow behind tractor / min. 16 hp

Aerating width, inches 48.0 36.0

Aerating depth, inches variable up to 3.0 variable up to 3.0

Optional removable weights 6 (5 gallon containers) 5 (5 gallon containers)

Tine quantity 40 32

Coring tines, inches 1/2 1/2

Weight (less weights containers), lbs 196 182


116


SC18

Application Sod cutter

Engine Honda GX

Power, hp* 5.5

Air filter type Two-stage

Operating width, inches 18.0

Welded 7 gauge steel construction

Powder coat paint

Depth adjustment, inches Variable up to 2.5

Transmission 2 cutting speeds, 2 transport, 1 reverse


Wheels 10" semi pneumatic

Productivity, feet per hour 15,600 to 20,250


Product size, L x W x H, inch 54 / 24 / 36

BE550

Application Bed edger

Engine Honda GX

Power, hp* 5.5

Air filter type Two-stage


Powder coat paint

Cut depth, inches 2 – 4


Wheels 9" pneumatic, smooth tread



Bedshaper blade

Bedshaper and cable blade ( )

Cable layer shield and blade ( )

Paver blade ( )

SG13 STUMP GRINDER

Application Stump grinder

Engine Honda GX with cyclone air filter

Power, hp* 13.0


Powder coat paint

Cut depth, inches, with adjustable handle 12.0

Cutter wheel Tungsten carbide tippe

Wheels 12" pneumatic, knobby tread

Clutch mechanism Centrifugal clutch


Shipping weight 350

Product size, L x W x H, inches 73 x 27 x 45

= Standard ― = Not available ( ) = Accessory * Engine power values are as rated by the engine manufacturer.

117


DT22 DT18 SD22

Application Dethatcher Dethatcher Seeder

Engine Briggs & Stratton or Honda Briggs & Sratton Briggs & Stratton or Honda

Power, hp* 5.5 5.5 5.5

Operating width, inches 22 18 22

Adjustable depth adjustment

Unibody construction, welded 10 gauge steel

Powder coat paintPTO (handle mounted bail, automatic declutching)Clutch mechanism V-Belt, spring loaded idler V-Belt, spring loaded idler V-Belt, spring loaded idler

Tine type Flail Flail Delta

Seed hopper capacity, lbs ― ― 30

Ergonomic folding handle

Weight (less fuel, with reel), lbs 140 130 150

Product size, L x W x H, inch 46 x 31 x 39 46 x 26.5 x 39 46 x 31 x 39

5 Bushel Catcher Bag ( ) ― ―

Seeder Kit ( ) ―

Spring Tines ( ) ( ) ―

Delta Blade ( ) ( )

Flail Blades ( ) ―

AR25 AR19 AR19 TA48 TA36

Application Aerator Aerator Aerator Towable aerator Towable aerator

Engine Honda GX Honda GX Briggs & Stratton ― ―

Power, hp* 4 4 5.5 Tow behind tractor / min. 16 hp

Tow behind tractor / min. 16 hp

Aerating width, inches 25.5 19 19 48 36

Aerating depth, inches variable up to 3 variable up to 3 variable up to 3 variable up to 3 variable up to 3

Standard removeable weights (# / lbs) 2 / 36 2 / 36 2 / 36 ― ―

Optional removeable weights ― ― ― 6 (5 gallon containers) 5 (5 gallon containers)

Drive system: V-Belt / Permalube chain ― ―

PTO (handle mounted pistol style bail) ― ―

Handlebar Fixed Foldable Foldable ― ―Clutch mechanism V-Belt, spring

loaded idlerV-Belt, spring loaded idler

V-Belt, spring loaded idler ― ―

Coring tines, inches 3/4 3/4 3/4 1/2 32

Tine quantity 42 30 30 40 32

Aerating pattern, inches 3.6 x 6.8 3.8 x 4.2 3.8 x 4.2 4.4 x 6 4.4 x 6

Productivity Up to 37,100 sq.ft /hr Up to 21,900 sq.ft /hr Up to 21,900 sq.ft /hr Up to 3.75 acres /hr Up to 3 acres /hr

Unibody construction, welded 10 gauge steel

Powder coat paint

Weight (less fuel & weight containers), lbs 422 288 288 196 182

Product size, L x W x H, inches 48 x 36 x 52 50 x 29.5 x 51 50 x 29.5 x 51 56 x 60 x 37.5 56 x 46 x 37.5

= Standard ― = Not available ( ) = Accessory * Engine power values are as rated by the engine manufacturer.

118

No two lawns are alike, so why treat them the same?

119


Whether you want to cut the grass and be done or enjoy mowing and a well manicured lawn, you need a lawnmower that is tailor-made for both you and your yard. Husqvarna offers an extensive range of mowers with several different cutting methods that meet virtually every cutting need. With the right equipment, the job becomes easier and the results better. As with all Husqvarna mowers, we focus on the user right from the start. Through function and ergonomics we have kept the focus on you and the results you expect from Husqvarna.

120

Performance.Husqvarna's new line of premium walk behind mowers offer several powerful engine options, with superior performance. Each model offers fi rst class cutting results and maximum user comfort.

Effi ciency.The innovative Hi-Vac cutting deck improves cut quality and effi ciently directs clippings to the collector minimizing the number of times necessary to empty the bagger.

Ergonomics.Ergonomically designed soft-grip handle with height adjustment and well-grouped controls ensure comfortable operation. With AutoWalk™, it’s easy to adjust the ground speed to suit your needs. The variable speed follows the pace of the operator.


Variable drive speed. Adjusts to the operator’s pace.

Central cutting height adjustment. Quickly and easily adjusts for optimum cutting height.

Optimum air flow. Ensures first class cutting results time after time.

121


Durability.Our lawnmowers are built to last with rock-solid, durable cutting decks made of zinc plated steel. Heavy-duty ball bearing wheels allow the mower to roll easily without becoming loose, even after years of heavy use.

Maneuverability.Front caster wheels allow you to turn the mower in a tighter radius without raising or lowering the deck, or sliding the wheels across the grass damaging the turf.

Safety.All our lawnmowers are equipped with a safety grip that instantaneously stops the blade and motor if the operator loses hold of the mower. The starter is placed on the handle, at a safe distance from the cutting deck making it easy for the user to reach.

Comfortable quick-fold handle. Perfect for transporting and storing.

Durable zinc-plated cutting deck. Better corrosion resistance for longer life.

3-in-1 cutting system. Provides versatility through several different cutting options.

www.husqvarna.com

122

Husqvarna’s WC21 series offers rugged cast aluminum decks, 9" cast aluminum wheels and durable, ergonomic one-piece handles. High performance engines and 100% commercial construction contribute to a long working life and superior reliability. Self-propelled models feature a

rugged 3-speed transmission with manual gear selection. A deck mounted engine guard doubles as a lift handle, and the high capacity collector features a balanced lift handle for simplified removal and attachment.

Commercial construction and performance.

COMMERCIAL PERFORMANCE

TECHNICAL SPECIFICATIONS WCB21 WCS21 WC21

Drive type 3 Speed 3 Speed Push

Engine manufacturer Kawasaki Kawasaki Kawasaki

Engine type FJ180V FJ180V FJ180V

Torque power * (ft.-lb.) 6.0 6.0 6.0


Blade engagement Blade Brake Clutch Direct drive Direct drive

Cutting system Collection / Mulch / Rear discharge Collection / Mulch / Rear discharge Collection / Mulch / Rear discharge


Collector capacity 2 Bushel 2 Bushel 2 Bushel


For areas with limited accessibility, the WC series walk behind mowers offer heavy-duty commercial performance.

124

Husqvarna 7021RC Husqvarna 7021RH

TECHNICAL SPECIFICATIONS 7021RC 7021RH

Engine manufacturer Honda Honda

Engine type GCV190 OHC GCV160 OHC

Cylinder displacement, cc 190 160

Torque power * (ft.-lb.) 5.1 4.4

Drive system Rear drive, variable speed Rear drive, variable speed


Cutting height, min / max, inches 1.25 – 4.2 1.25 – 4.2

Cutting methods Collection, mulch and side discharge Collection, mulch and side discharge

Wheel size, front / rear, inches 9 / 9 9 / 9

Cutting deck material Steel Steel

Starting method ARCS ARCS

Two point deck height adjustment


OPTIMUM HANDLING AND PERFORMANCE

Ideal for medium to larger size lawns, this range of durable 3-in-1 lawnmowers offers optimized

mowing in all grass conditions.

Durable lawnmowers with 3-in-1 cutting system that’s ready when you are.These powerful, efficient and easily maneuverable mowers, feature three cutting modes – collection, mulch and side discharge. The Hi-Vac cutting deck helps fill the collector to the optimum level, meaning less frequent emptying. The collector is compact and placed in a high position, making it easy to handle. These models also feature variable drive

speed which makes it easy to adjust the speed according to your needs and the condition of the lawn. The zinc-plated steel cutting deck ensures high durability. Additional features include a foldable handle, adjustable handle height, two point deck height adjustment and water hose connection for easy cleaning.

125

Husqvarna 7021RB Husqvarna 7021R

TECHNICAL SPECIFICATIONS 7021RB 7021R

Engine manufacturer Honda Honda

Engine type GCV160 OHC GCV160 OHC



Drive system Rear drive, variable speed Rear drive, variable speed


Cutting height, min / max, inches 1.13 – 3.42 1.13 – 3.42




Starting method ARCS ARCS

Blade brake clutch ―


SELF-PROPELLED MOWING

High performing and equipped with steel cutting decks, these self-propelled mowers include rugged

components that extend the life of the mower.

These rugged, self-propelled mowers for medium-sized and large yards feature durable steel cutting decks and double ball-bearing wheels that ensure sturdy operation and increase durability. Choose from three cutting systems; collection for tidy results, mulch for lawn fertilization and side discharge for areas cut less frequently. Both models offer variable drive speed for maximum driving comfort

and cutting efficiency. All models feature a convenient central cutting height adjustment and water hose connection for easy cleaning. The 7021RB also features a Blade Brake Clutch, enabling you to remove objects or debris from the mowing path in front of the machine without turning off the mower.

Self-propelled mowers with steel cutting decks.

126

Husqvarna XT722FEHusqvarna XT721F

ROCK SOLID DEPENDABILITY

Solid yet versatile, these self-propelled mowers with collectors will easily power their way

around any yard.

Powerful, versatile lawnmowers for a variety of lawn conditions.Equipped with heavy-duty steel cutting decks and easy-start engines, these models feature collection, mulch and side discharge, offering you added versatility in terms of mowing frequency and cutting results. Rugged ball-bearing wheels ensure a smooth run and minimized play, even after

many years of use. Variable drive speed allows you to adjust the speed according to your needs and the condition of the lawn. Both units have a foldable handle for easy storage and transportation, while the XT722FE features a key start for easier starting.

TECHNICAL SPECIFICATIONS XT721F XT722FE

Engine manufacturer Kohler Kohler

Engine type XT-7 XT-7



Drive system Front drive, variable speed Front drive, variable speed


Cutting height, min / max, inches 1.23 – 3.47 1.41– 3.62




Starting method Recoil - No choke, no prime Key start

Three position adjustable handle ―


127

This reliable mower is perfect for the smaller yard. Compact enough to get into

all those small difficult places and an ideal size for easy storage.

COMPACT MOWING FOR SMALL YARDS

This efficient mower features a compact design, making it easy to maneuver in tight spaces, and three cutting systems, collection, mulch and side discharge. The handle folds for easy storage and transportation. Double ball-bearing wheels ensure smooth operation and durability,

and thanks to the water hose connection it is easy to clean the mower after each use. The 7021P also offers 4 point, 9 position cutting height adjustment for varying lawn conditions.

Compact, reliable lawnmower ideal for the smaller yard.

TECHNICAL SPECIFICATIONS 7021P


Engine type GCV160

Cylinder displacement, cc 160

Torque power * (ft.-lb.) 4.4

Drive system Push


Cutting height, min / max, inches 1.25 – 3.42

Cutting methods Collection, mulch and side discharge

Wheel size, front / rear, inches 8 / 12

Cutting deck material Steel

Starting method ARCS

* Engine power values are as rated by the engine manufacturer. Features glossary and further technical specifications on pages 130 –133.

128

VERSATILE TRIMMING SOLUTION

If you're faced with large amounts of trimming or hard to reach areas, the HU625HWT easily

cuts though your toughest lawn projects.

The ultimate trimming machine on wheels.Powered by a hearty Briggs & Stratton engine, this trimmer on wheels delivers a powerful punch to areas of the lawn too large for a hand-held trimmer and too tight for a mower. With a cutting width of 22 inches, large trim jobs get done in less time. The trim height adjusts easily from

1.6 to 3 inches and replacing the trimmer line takes only a few minutes. An all around great performer, the HU625HWT takes care of your tough trimming tasks while you enjoy the walk.

TECHNICAL SPECIFICATIONS HU625HWT


Engine type 625



Drive system Push


Cutting height, min / max, inches 1.6 – 3.0

Cutting type .155 Diameter trimmer line

Wheel size, rear, inches 12

Starting method Recoil


129

Husqvarna 540 Husqvarna 64 / 54

TECHNICAL SPECIFICATIONS 540 64 54


Cutting height, min-max, in 0.5 – 1.5 0.5 – 2.5 0.5 – 1.5

Cutting height steps 4 Infi nite 4

Weight, lbs 20.0 19.0 19.0

Non-friction silent mower ― ―

Extra hardened reel blade and bedknife

Pilot handlebar ― ―

Collector ( ) ( ) ( )

= Available ― = Not available ( ) = Accessory Features glossary on pages 130 –133.

SIMPLE YET EFFECTIVE MOWING

Ideal for cutting small areas of grass, our manual mowers are easy on the wallet and the environment. Easy to operate,

these sturdy and durable mowers just keep on going.

These mowers use no gasoline or electric power so they don’t emit any pollution. In addition, they provide excellent cardio-vascular exercise while mowing the lawn. Suitable for smaller yards, these mowers deliver excellent cutting results and are very economical to use. The Husqvarna 64 offers an adjustable cutting height up

to 2.5 inches. It is easy to use even in tall grass. The Husqvarna 540 features a free shear cutting system that makes it one of the quietest mowers on the market. It is also extremely easy to push. For making your lawn look extra tidy, all models can be fitted with the collector accessory.

Manual lawnmowers – friendly to your lawn and the environment.

130

Collection.When collecting the grass you get a tidy cutting result. The risk of spreading weeds is less and the collected grass is easily emptied. You can also collect leaves and small twigs.

Mulching.The grass is cut into small pieces that quickly decompose and return to the lawn as fertilizer, also making the lawn more drought resistant. Mulching is suitable for frequently cut areas.

Side discharge.These cutting systems have high capacity and are suitable for taller and coarse grass types and seldom-cut lawns.

Hi-Vac cutting deck.The Hi-Vac cutting deck helps fill the collector to the optimum level, meaning less frequent emptying. The collector is compact and placed in a high position, making it easy to handle.

AutoWalk™.The AutoWalk self-propelled drive system is engaged by simply squeezing the AutoWalk triggers on the handlebar. Variable speed follows the pace of the operator. Available in both front and rear wheel drive systems.

Variable drive speed.Easy to adjust the ground speed according to your needs and the condition of the lawn.

Zinc-plated steel cutting deck.The cutting deck is zinc-plated through a galvanization process, which gives high durability. It is also powder-coated for better corrosion resistance and longer life.

One-piece cutting deck.The cutting deck comes in one piece straight out of the stamping line which means it has no welded parts. This gives very high torsional rigidity, tolerance and durability, as well as sturdiness in operation.

The Husqvarna lawnmower features glossary.

TECHNICAL FEATURES

131

TIPS BEFORE BUYINGCentral cutting height adjustment.Quick and easy adjustment of the grass cutting height. One lever adjusts the whole deck.

Ergonomic soft-grip handle.The molded soft-grip handle is angled for optimum comfort and ergonomic control.

Handle height adjustment.Adjustable handle height for improved ergonomics.

Foldable handle.For simplifi ed storage and transport.

ReadyStart.The ReadyStart system eliminates the need to manually prime or choke the engine. It also reduces resistance in the starter cord by 30 %, making the mower very easy to start.

Electric start.Insert the ignition key and push it in like a button – the mower starts smoothly and effortlessly. The battery can be removed without tools and can be charged separately.

Blade brake clutch.Makes it possible to stop the blade while the engine is still running. A great feature when emptying the bag or removing debris from your path.

Double ball-bearing wheels.Ensure the mower rolls easily and without the wheels becoming loose, even after many years of use.

Water hose connection.Facilitates cleaning of the cutting deck. Just attach the hose, turn on the water and start the engine for easy cleaning.

Non-friction silent mower.The lack of friction between the reel blade and bedknife minimizes resistance and noise, making the mower very easy to push.

Extra hardened reel blade and bedknife.For excellent cutting performance and maximum durability.

TECHNICAL FEATURES

What to consider before making your choice.The first thing you should do when you’ve decided to buy a lawnmower is think through a number of questions:

What is the size and layout of the lawn?The larger the lawn, the greater the cutting width needed. Remember that every 1200 square yards of lawn you mow means a walk of almost two miles. For large lawns self-propelled mowers or Riders may be a better option.

How often do you mow?The cutting system you choose is determined by the type of lawn and how often you mow it. Rear and side discharge can handle taller, wilder grass, coarser grass types and seldom-cut lawns.

Do you want collection?Lawnmowers with collection save time and clean-up, and can also be used for leaves, twigs and weeds. Collection is also a good idea if you want to avoid allergic reactions to grass, and decrease the spreading of weed seeds.

What is mulching?The mulching method is ideal if you demand first-rate results and if you mow often. The finely-chopped grass cuttings fertilize the lawn and make it more drought resistant.

Do you want an environmentally friendly or quieter lawnmower?If you’re environmentally conscious you might consider a manual lawnmower which is free from emissions and reduces noise pollution.

Visit the Husqvarna web page for our full range of lawnmowers and accessories. Here you’ll find additional advice to help you decide which machine is right for the job you have in mind. For more information regarding your purchase, contact your Husqvarna servicing dealer.

www.husqvarna.com

132

WCB21 WCS21 WC21 7021RC 7021RH 7021RB 7021R XT721F XT722FE 7021P

Engine manufacturer Kawasaki Kawasaki Kawasaki Honda Honda Honda Honda Kohler Kohler Honda

Engine type FJ180V FJ180V FJ180V GCV190 OHC GCV160 OHC GCV160 OHC GCV160 OHC XT-7 XT-7 GCV160 OHC

Displacement, cc 180 180 180 190 160 160 160 173 173 160

Torque power * (ft.-lb.) 6.0 6.0 6.0 5.1 4.4 4.4 4.4 7.0 7.0 4.4

Fuel tank volume, gallons 2.1 2.1 2.1 0.3 0.3 0.3 0.3 0.3 0.26 0.26

Drive system 3 Speed 3 Speed Push Rear drive, variable speed Rear drive, variable speed Rear drive, variable speed Rear drive, variable speed Front drive, variable speed Front drive, variable speed Push

Drive wheels Rear Rear Rear Rear Rear Rear Rear Front Front ―

Wheel size, front / rear, inches 9 / 9 9 / 9 9 / 9 9 / 9 9 / 9 8 / 8 8 / 8 8 / 12 8 / 8 8 / 12

Cutting deck material Cast aluminum Cast aluminum Cast aluminum Steel Steel Steel Steel Steel Steel Steel

One-piece cutting deckCutting methods Collection / Mulch /

Rear dischargeCollection / Mulch /



Side dischargeCollection / Mulch /






Side dischargeCutting width, inches 21 21 21 21 21 21 21 21 22 21

Cutting height, min – max, inches 0.8 – 3.5 0.8 – 3.5 0.8 – 3.5 1.25– 4.2 1.25– 4.2 1.13– 3.42 1.13– 3.42 1.23– 3.47 1.41– 3.62 1.25– 3.42

Cutting height adjustment Single point Single point Single point 3 Point 2 Point Single point Single point 4 Point 4 Point 4 Point

Cutting height indicator ― ― ― ― ― ― ― ―

Collector type Soft bag Soft bag Soft bag Hi Vac Hi Vac Soft bag Soft bag Soft bag Soft bag Soft bag

Collector volume, bushels 2 2 2 2 2 2 2 2 2 2

Handle type Standard Standard Standard Comfort Comfort Comfort Comfort Comfort Comfort Comfort

Handle height adjustment ― ― ―

Comfort handle with well-grouped controls ― ― ―

Side-adjustable handle ― ― ― ― ― ― ―

Foldable handle ― ― ―

Hidden cables ― ― ― ― ― ― ― ― ― ―

ReadyStart ― ― ― ― ― ― ― ― ―

Electric start ― ― ― ― ― ― ― ― ―

Blade brake clutch (BBC) ― ― ― ― ― ― ― ―

Double ball-bearing wheels

Steel rims with rubber tires ― ― ― ― ― ― ―

Cast aluminium rims with rubber tires ― ― ― ― ―

Water hose connection ― ― ― ― ― ― ― ―

Weight, lbs 140 132 126 105 103 101 101 102 102 81



133

WCB21 WCS21 WC21 7021RC 7021RH 7021RB 7021R XT721F XT722FE 7021P

Engine manufacturer Kawasaki Kawasaki Kawasaki Honda Honda Honda Honda Kohler Kohler Honda

Engine type FJ180V FJ180V FJ180V GCV190 OHC GCV160 OHC GCV160 OHC GCV160 OHC XT-7 XT-7 GCV160 OHC

Displacement, cc 180 180 180 190 160 160 160 173 173 160

Torque power * (ft.-lb.) 6.0 6.0 6.0 5.1 4.4 4.4 4.4 7.0 7.0 4.4

Fuel tank volume, gallons 2.1 2.1 2.1 0.3 0.3 0.3 0.3 0.3 0.26 0.26

Drive system 3 Speed 3 Speed Push Rear drive, variable speed Rear drive, variable speed Rear drive, variable speed Rear drive, variable speed Front drive, variable speed Front drive, variable speed Push

Drive wheels Rear Rear Rear Rear Rear Rear Rear Front Front ―

Wheel size, front / rear, inches 9 / 9 9 / 9 9 / 9 9 / 9 9 / 9 8 / 8 8 / 8 8 / 12 8 / 8 8 / 12

Cutting deck material Cast aluminum Cast aluminum Cast aluminum Steel Steel Steel Steel Steel Steel Steel

One-piece cutting deckCutting methods Collection / Mulch /










Side dischargeCutting width, inches 21 21 21 21 21 21 21 21 22 21

Cutting height, min – max, inches 0.8 – 3.5 0.8 – 3.5 0.8 – 3.5 1.25– 4.2 1.25– 4.2 1.13– 3.42 1.13– 3.42 1.23– 3.47 1.41– 3.62 1.25– 3.42

Cutting height adjustment Single point Single point Single point 3 Point 2 Point Single point Single point 4 Point 4 Point 4 Point

Cutting height indicator ― ― ― ― ― ― ― ―

Collector type Soft bag Soft bag Soft bag Hi Vac Hi Vac Soft bag Soft bag Soft bag Soft bag Soft bag

Collector volume, bushels 2 2 2 2 2 2 2 2 2 2

Handle type Standard Standard Standard Comfort Comfort Comfort Comfort Comfort Comfort Comfort

Handle height adjustment ― ― ―

Comfort handle with well-grouped controls ― ― ―

Side-adjustable handle ― ― ― ― ― ― ―

Foldable handle ― ― ―

Hidden cables ― ― ― ― ― ― ― ― ― ―

ReadyStart ― ― ― ― ― ― ― ― ―

Electric start ― ― ― ― ― ― ― ― ―

Blade brake clutch (BBC) ― ― ― ― ― ― ― ―

Double ball-bearing wheels

Steel rims with rubber tires ― ― ― ― ― ― ―

Cast aluminium rims with rubber tires ― ― ― ― ―

Water hose connection ― ― ― ― ― ― ― ―

Weight, lbs 140 132 126 105 103 101 101 102 102 81



134

The robotic lawnmower that leaves you free to do other things.

135


If you want a nicely groomed lawn but without the work, then Automower ® is the machine for you! Silent, electrically powered and fully automatic, it works when you tell it to — leaving you free to do other things. Quietly mowing your lawn, it cuts the grass frequently, and the small clippings are returned to the lawn to form fertilizer. Battery powered, Automower ® offers you an alternative with less impact on the environment. It gives off no emissions and has low energy consumption.

136

Performance.With the settings panel the mower can be personalized to fi t many different lawns and preferences. The drive wheels provide excellent traction even if the surface is slippery. The mower also handles slopes up to 35°.

Effi ciency.You decide if you want Automower™ to mow the lawn around the clock, 7 days a week. The three razor like cutting blades make clean cuts and since Automower™ works continuously, it will cut the grass frequently. Shorter clippings mean better fertilizing and a greener lawn.

Ergonomics.What can be more ergonomic when you, the homeowner, don’t have to mow the lawn at all? When power is needed it fi nds its own way back to the charging station.

Automatic charging. Finds its way to the charging station then continues with the work.

Easy set-up timer. You decide the working hours.

Unique cutting system. Shorter clippings for better fertilization.


137


Durability.Built to withstand harsh climates without any problems. Being weather resistant, it can be outside around the clock and is designed to function properly and unattended regardless of the weather conditions.

Environment.Automower® is powered by electricity, and the Solar Hybrid version is also assisted by the sun, resulting in no emissions. It also works extremely discreetly, quietly and just when you want. The low energy consumption allows it to operate at a fraction of the cost of other conventional lawnmowers.

Safety.If lifted off the ground or tipped over, the cutting automatically shuts off. In addition, the blades are rotating far from the outer edge of the machine. When meeting obstacles it will stop and redirect itself without causing any damage.

An alternative with less impact on the environment. Low noise, low energy consumption and no emissions.

Anti-theft alarm system and PIN code lock. Gives protection and peace of mind.

www.husqvarna.com

138

TECHNICAL SPECIFICATIONS 260 ACX

Recommended working area 1/4 acre (+ / –20 %)

Charging principle Automatic

Cutting system 5 pivoting razor blades

Cutting height / width, inches 0.5 – 2.5 / 12.5

Guide wire Yes, 2 guides

Remote text messaging

Ultrasonic sensor

Lift sensor

Tilt sensor

Alarm

Pin code lock

= Available Features glossary and further technical specifications on pages 142 –143.

Day and night. Medium sized grass areas or bigger. Taking charge of the mowing duties

it even informs you by SMS if there are any problems.

Automower® 260 ACX is designed for semi-professional use in business or public environments as well as for demanding homeowners. Like all Husqvarna robotic mowers, it charges and operates itself without need for supervision. Should anything disturb the operation, 260 ACX sends a text message to your mobile phone. Thanks to 1.4 acre (5500 m²)

capacity, low noise level and no requirement of labor, this mower is perfectly suited for use in quiet environments such as hospitals, hotels and leisure facilities, and office locations. Day or night, rain or shine, it simply gets on with the mowing, leaving you free to get on with managing your business.

Takes mowing duties seriously and reports any problems.

THE PROFESSIONAL ON CALL MOWER

139

TECHNICAL SPECIFICATIONS SOLAR HYBRID

Recommended working area 1/2 acre (+ / –20 %)

Charging principle Automatic

Cutting system 3 pivoting razor blades

Cutting height / width, inches 0.5 – 2.5 / 9

Guide wire Yes, 2 guides

Remote text messaging

Lift sensor

Tilt sensor

Alarm

Pin code lock

= Available Features glossary and further technical specifications on pages 142 –143.

If you prefer to use machinery with less impact on the environment, then this robotic mower is just what you need. Powered by the sun, it is revolutionizing not only the way we

cut grass but the way we work in the yard.

Let the sun help you keep your lawn looking great. Husqvarna Automower® Solar Hybrid, does just that. Based on revolutionizing technology, the solar panel adds power from the sun to charge the battery. No noise, no emissions and no worries. You just place it on the lawn and watch it go to work. The solar panel will, in good conditions, double the mow time per charge, which means

even less energy consumption. When light fades and during nights, the battery takes over. Mowing daytime only, you have the capacity of over 1/4 acre. If you let it work around the clock it can handle approximately 1/2 acre. It’s like having a silent greens-keeper working 24 hours, 7 days a week, with a perfect result.

Powered by the sun it works while you do the other chores.

SOLAR POWERED MOWING

140

Automower® 230 ACX Automower® 220 AC Automower® 210 C

TECHNICAL SPECIFICATIONS 230 ACX 220 AC 210 C

Recommended working area 3/4 acre (+ / –20 %) 1/2 acre (+ / –20 %) 1/8 acre (maximum)

Charging principle Automatic Automatic Manual

Cutting system 3 pivoting razor blades 3 pivoting razor blades 3 pivoting razor blades

Cutting height / width, inches 0.5 – 2.5 / 9 0.5 – 2.5 / 9 0.5 – 2.5 / 9

Guide wire Yes, 2 guides Yes, 1 guide N / A

Lift sensor

Tilt sensor

Alarm ―

Pin code lock

= Available ― = Not available Features glossary and further technical specifications on pages 142 –143.

Let Husqvarna Automower® keep your lawn looking great, while you do something else. These models are battery powered, moving across your lawn in a random pattern. When the mower reaches the boundary wire, it turns around and proceeds back across the lawn. Automower®

produces no emissions and it’s extremely quiet. The razor-like blades cut the grass cleanly and since cutting is so frequent, the grass clippings are short, which produces better fertilizer.

An extra pair of hands in the yard are always useful and a mower that looks after itself, that’s perfect.

Ideal for homeowners who would prefer to be doing other things around the house or yard.

THE BATTERY POWERED MOWER

Hard-working battery-powered robotic mowers.

141

ACCESSORIES 260 ACX SOLAR HYBRID 230 ACX 220 AC 210 C

Metallic painted body ― ― ―Housing ― ―Wall hanger ―Soft carry bagGPS communication unit ―Remote text messaging S S ―Wheel brush kitWheel kit for slopes ―Signal boosterSecondary area generator

= Available ― = Not available S = Standard

ACCESSORIES

Housing.Protects the charging station and Automower® from exposure to sun and rain.

GPS communication unit.GPS theft tracker. SMS alert. Settings changes can be handled from a distance as well as submitting current operating status.

Soft carry bag.A special carry bag makes it easy to move Automower® between lawns.

Wheel brush kit.Keeps the driving wheels clean to maintain good traction.

Wall hanger.Easy wall storage when not in use or during winter.

Remote text messaging.If something unforeseen disturbs operation, this function allows Automower® to send a text message to a pre-programmed mobile phone. An excellent fl eet management tool.

Secondary area generator.In yards with separated lawns, secondary loops are sometimes needed. This generator powers the signal in the remote loop.

Signal booster.Increases the signal strength to a suffi cient level in long loop wire installations.

Wheel kit for slopes.Increases ground pressure on the front wheels to improve stability when mowing on uphill slopes.

Automower® color collection.Personalize your mower with a high quality metallic varnished painted outer casing. Colored in the four elements – earth, fi re, water and air.

142

TECHNICAL FEATURES

TIPS BEFORE BUYINGThe Husqvarna Automower ® features glossary.

What to consider before making your choice.Select a model according to the area to be mowed. These robotic mowers can handle lawns up to 1.4 acres, depending on the model used and are designed to mow grass on ordinary lawns free from stones, large branches and the like. It easily handles rough terrain and slopes up to approximately 35 % incline. Consider the shape and complexity of your lawn before you decide which model to buy.

What effect does Automower ® have on the environment?Since they run on batteries, there are no emissions generated by the mower, and the actual energy consumption is very low, comparable with the energy consumption of a light bulb.

Is Automower ® noisy?No, they are exceptionally silent. So it won’t disturb the neighbors, even when working night shifts.

Is there security and theft protection?Automower® is theft-proof with alarms and security codes and can be left unattended. Without these codes the mower becomes totally worthless to the thief. The GPS tracking module allows the mower to be found if stolen.

What about rain and wet conditions?Being weatherproof, it is perfectly happy to work in the rain and damp conditions.

Visit the Husqvarna web page for our full range of robotic mowers and accessories. Here you’ll find additional advice to help you decide which machine is right for the job you have in mind. For more information regarding your purchase, contact your Husqvarna servicing dealer.

Automatic charging.When power is needed, it fi nds its own way to the charging station.

Manual chargingWhen power is needed, Automower® 210 C will shut down and wait for the owner to manually charge the mower.

Cutting height adjustment.The cutting height is easily adjusted from above by turning one large knob on top of the mower.

Information panel.With the information panel the mower can be personalized to fi t many different yards and preferences.

Remote text messaging.If something unforeseen disturbs operation, this function allows Automower® to send a text message to a pre-programmed mobile phone.

Solar panel.An additional energy source that gives this mower extra power directly from the sun.

Timer.Allows daily or weekly running times according to owner requirements.

Alarm.A loud anti-theft alarm gives good protection of the mower.

PIN code lock.The mower is protected through a personalized PIN code.

Large driving wheels.Large coarse-treaded wheels increase the performance on uneven ground. The mower handles slopes up to 35 %.

Lift sensor.If lifted off the ground or tipped over, the cutting blade automatically shuts off.

Tilt sensor.Indicates the gradient of the mower.

Ultrasonic sensor.Built-in sensors, using ultrasonic technology, help avoid hard collisions with obstacles such as trees and poles.

Boundary wire.The working area is defi ned with a boundary wire.

Staples.The boundary wire is secured by staples.

Blades.The razor like blades can be easily replaced with new ones.

www.husqvarna.com

143

260 ACX Solar Hybrid 230 ACX 220 AC 210 C

Recommended working area 1.4 acre + / – 20 % 1/2 acre + / – 20 % 3/4 acre + / – 20 % 1/2 acre + / – 20 % 1/8 acre maximumArea capacity per hour, sq. ft. 2476 + / – 20 % 807 – 1184 depending

on light conditions 1345 + / – 20 % 807 + / – 20 % N / A

Navigation Irregular Irregular Irregular Irregular Irregular

Guide wire Yes, 2 guides Yes, 2 guides Yes, 2 guides Yes, 1 guide N / A

Drive and cutting motor type 2 + 1 Brushless DC motors

2 + 1 Brushless DC motors




Battery type / capacity / voltage NiMH / 6.0 Ah / 18 V NiMH / 2.2 Ah / 18 V NiMH / 4.4 Ah / 18 V NiMH / 2.2 Ah / 18 V NiMH / 3.0 Ah / 18 V

Charging current / principle 6.0 A / Automatic 2.1 A / Automatic 4.0 A / Automatic 1.75 A / Automatic 0.6 A / Manual

Additional energy source ― Solar panel ― ― ―

Cutting system 5 pivoting razor blades 3 pivoting razor blades 3 pivoting razor blades 3 pivoting razor blades 3 pivoting razor blades

Power, W 60 32 42 30 36

Cutting width / height, inches 12.5 / 0.5 – 2.5 9 / 0.5 – 2.5 9 / 0.5 – 2.5 9 / 0.5 – 2.5 9 / 0.5 – 2.5

Noise level, dB(A) 69 64 64 64 64

Weight, lbs 30.0 22.0 24.0 20.0 22.0

Keypad, buttons 16 16 19 19 12

Information panel LCD-display with menu LCD-display with menu LCD-display with menu LCD-display with menu Three LEDs

Remote text messaging S S ―

Alarm ―

Pin code lock

Lift sensor

Tilt sensor

Ultrasonic sensor ― ― ― ―

Boundary wire, ft ― 820 1312 820 492

Staples, pcs ― 200 400 200 100

Extra blades, pcs 30 9 9 9 9

= Available ― = Not available S = Standard


144

A garden is only as good as its soil. Treat it well and it will reward you.

145


Regardless of its character, a garden always contains soil. The better you treat it, the more generously it will bring you flourishing splendor and sweet fruits. Of course, thorough preparation is necessary for a perfect result — in gardening just like in everything else. You’ll find a tiller that suits your needs in the Husqvarna range — powerful, versatile cultivators and tillers for any type of soil. What they have in common are the qualities they share with all Husqvarna outdoor products: dependable efficiency, superb ergonomics, proven durability and environmental care. All in all, they’re in a class of their own.

146


Effi ciency.With Husqvarna tillers, effi ciency is the key. Our units feature easy-to-start engines, reverse gear for top-notch maneuverability and a versatile range of accessories for handling a variety of tasks in the garden.

Durability.Our tillers are built with the highest quality components and thoroughly tested to ensure optimum durability. Our gasoline-powered models are equipped with durable, high-performance Honda or Briggs & Stratton engines.

Driven wheels with heavy tread tires. For efficient operation and optimum grip.

Dual rotating tines. For deep-digging of heavy soil or top soil cultivation.

Environment.At Husqvarna, we work continually to reduce environmental impacts. We recently introduced the world’s fi rst battery-powered tiller. An alternative with less impact on the environment and quieter than our fuel-effi cient gasoline-driven models.

Durable, high-performance engines. Offer easy, dependable starting every time.

Reverse gearbox. Improves maneuverability and gives extra control.

Features shown are available on select models. www.husqvarna.com

147

TECHNICAL SPECIFICATIONS TB 1000

Power, W 1000

Battery type Rechargeable sealed lead acid battery

Battery capacity, Ah 12

Battery voltage, V 36

Operating time, min * 30 – 45

Average battery charging time, hours 6 – 8

Number of tines 6

Cultivating width (with 6 tines), inches 18.5

Rotational speeds forward, rpm 64 / 136 / 160

Rotational speed reverse, rpm 64

Weight, lbs 70

Removable battery pack

= Available * Depending on ground conditions (when fully charged). Features glossary and further technical specifications on pages 152 –153.

The world’s first battery-powered tiller.Lightweight, quiet, effective and easy to operate, Husqvarna's TB 1000 is the perfect tiller for demanding homeowners who care as much about the environment and the neighbors as they do about superb results. The TB 1000 performs just like any gasoline-driven tiller in its class, but without the noise and emissions. The ergonomic handlebar features soft-grip and easy-access touch-controls for start, stop and reverse. Its

compact design makes this tiller very comfortable to use as well as transport and store. The battery pack is easily removed and can be charged separately or while fitted on the machine. The TB 1000 is a versatile gardening tool that can also be equipped with accessories for ridging, edging and dethatching.

When you care about noise levels and emissions, a battery-powered tiller can make all the difference.

LESS NOISE, NO EMISSIONS

148

TECHNICAL SPECIFICATIONS DRT900LS DRT900H DRT900E DRT900

Engine manufacturer Honda Honda Briggs & Stratton Briggs & Stratton

Engine type GCV160 GCV160 900 Series OHV 900 Series OHV

Cylinder displacement, cc 160 160 205 205

Torque power * (ft.-lb.) 6.9 6.9 9.0 9.0

Fuel tank volume, quarts 2.0 2.0 3.0 3.0

Cultivating width, inches 19 17 17 17

Cultivating depth, inches 6.5 6.5 6.5 6.5

Rotational speed, rpm 190 190 190 190

Transmission Gear Gear Gear Gear

Transmission steps, forward / reverse 1 / 1 1 / 1 1 / 1 1 / 1

Electric start ― ― ―

Heavy tread agricultural tires


Big job to do? Husqvarna tillers handle heavy packed earth with ease. Ideal for

demanding landowners.

Advanced rear-tine tiller for heavy duty use.Our DRT series of high-performance rear-tine tillers have the capacity to till deep, even in hard soils. They feature drive wheels with heavy tread tires for optimized grip, plus forward and reverse gear for easy operation. Equipped with powerful, reliable Honda or Briggs & Stratton engines, these machines target landowners who have large areas to till and demand first class results. The dual rotating tines provide

deep soil tilling on densely packed earth as well as older lawns. All models feature forward-rotating tines that allow the option of performing top soil cultivation in smaller gardens. The DRT900LS provides an extra wide 19" tilling width, while the DRT900E features an industry-first electric start.

DEMANDING HEAVY USERS

149

Husqvarna CRT900Husqvarna CRT1350LS

TECHNICAL SPECIFICATIONS CRT1350LS CRT900


Engine type 1350 Series OHV 900 Series OHV



Fuel tank volume, quarts 4.0 3.0

Cultivating width, inches 21 14

Cultivating depth, inches 7 6

Rotational speed, rpm 299 190

Transmission Gear Gear

Transmission steps, forward / reverse 1 / 1 1 / 1

Counter-rotating tines

Heavy tread agricultural tires


If you have a large garden to cultivate, these machines have the power to get

you through the job.

Powerful counter rotating tine tillers for a variety of users.Ideal for home and landowners preparing large flower beds and vegetable gardens, our CRT models feature counter-rotating tines for efficient, superior performance. Equipped with reliable, easy to start Briggs & Stratton engines, they offer

forward and reverse gears for improved maneuverability around the garden. The counter rotating tines and high rotational speed make light work of your toughest projects in the yard.

RELIABLE FOR FREQUENT USE

150

TECHNICAL SPECIFICATIONS FT900


Engine type 900 Series OHV



Fuel tank volume, quarts 3.0

Cultivating width, inches 12 / 24 / 26

Cultivating depth, inches 6.5

Rotational speed, rpm 118

Transmission Chain / Manual

Transmission steps, forward / reverse 1 / 1

Approximate weight, lbs 100

― = Not available * Engine power values are as rated by the engine manufacturer. Features glossary and further technical specifications on pages 152 –153.

Light, handy and versatile tillerfor work in the yard.The weight and size of this tiller makes it extremely easy to handle, maneuver, transport and store. This machine is perfect for homeowners who want to prepare garden patches and flower beds without using a spade. And that’s

just the beginning, with this tiller you can do so much more. Powered by reliable, easy-start Briggs & Stratton engines, the FT900 is equipped with carrying handles for easy handling before and after use.

THE GARDENERS FRIEND

Everything is easy about this tiller. Easy to start, easy to use, easy to

transport, easy to store. In fact, this cultivator is easily the right one

for all dedicated growers.

151

TECHNICAL SPECIFICATIONS LE475


Engine type 475 Series



Fuel tank volume, quarts 1.0

Working width, inches 9

Edging depth, inches 4

Rotational speed, rpm 3690

Transmission Belt

Weight, lbs 71


Trimming or edging along flower beds and walkways, even on slopes just got a lot easier. This wheeled

edger will stop at almost nothing to help you make your garden the envy of the neighborhood.

Gain an edge on the competition.The LE475 is designed for the demanding landowner or grounds-keeper. Husqvarna’s edger provides the perfect edge along walkways or flowerbeds. Precision, ergonomics and a heavy-duty design are the name of the game with this

wheeled edger. With its high-torque 4-cycle engine and versatile 90° rotating blade for beveling flowerbeds or conversion to a brushcutter, the LE475 edges a variety of soils and grasses with ease.

PERFECT EDGING

152

TECHNICAL FEATURES

TIPS BEFORE BUYING

High-capacity battery.The high-capacity battery provides performance levels comparable to a gasoline driven machine.

Ergonomic soft-grip handlebar.Ergonomically designed handlebar with comfortable soft-grip and easy-access controls.

Touch-controls.Comfortable operation with easy access touch controls for start, stop and reverse.

Turbo speed.In tougher conditions, activate the turbo speed, for 15 % extra rotational power.

Reverse speed.Reverse tine direction for easier operation and increased maneuverability.

Adjustable handlebar.The handlebar is adjustable both horizontally and vertically for an optimum working position.

Foldable handlebar.For easy storage and transportation.

Battery indicator lamp.Indicates when the battery is running low and it is time to charge it.

Removable battery pack.The battery pack is equipped with a carry handle and is very easy to remove and charge. The battery can also be charged while fi tted on the machine.

Double transport wheels.You can transport the unit by tilting it backwards onto the transport wheels.

Dual-rotating tines.The tines rotate either forward or reverse. Use forward-rotating mode for top soil cultivation and counter-rotating mode for deep soil tilling.

Counter-rotating tines.Tines rotate counter-clockwise, so the soil is broken up very well. Capable of deep-digging in heavy soil.

Driven wheels.Powered wheels for easy and comfortable operation.

Drag bar.Easy-adjust drag bar, for different working conditions.

Power forward and reverse.With power forward and reverse capabilites, our tillers make it easier to navigate between rows and transport for storage.

Handlebar-mounted gear selection.Ergonomic handle with easy-access controls.

Reverse gearbox.Improves maneuverability and control.

Heavy tread agricultural tires.Large wheels with heavy treads for optimized grip.

What to consider before making your choice.Whether you need to break up a lawn or prepare a garden patch for sowing, Husqvarna has a solution for you. The rear-tine models are designed for use on densely packed earth and lawns. With powered wheels and counter-rotating tines these machines break up soil very effectively.

The front-tine tillers are suitable for smaller landscaping projects, such as preparing flower beds and garden patches. These tillers are driven by the tines and are available with working widths from 12 –24 inches.

For large and open areas a rear-tine counter-rotating ■ tiller or a front-tine tiller with high engine power and generous working width is the most suitable.

For added versatility in the garden, consider buying a ■

front-tine tiller with accessories for moss raking, edging and ridging.

If you have mutliple small patches and flower beds in your ■

garden make sure that the tiller you choose has carrying handles or transport wheels.

For optimum maneuverability and control, choose ■

a tiller with a reverse gear.

Visit the Husqvarna web page for our full range of cultivators and accessories. Here you’ll find additional advice to help you decide which machine is right for the job you have in mind. For more information regarding your purchase, contact your Husqvarna servicing dealer.

Counterweight.Increases weight on the wheels and improves balance.

Adjustable depth bar.For easy adjustment of the cultivating depth.

Tine shield.Minimizes debris spray from the rotating tines.

The Husqvarna cultivator and tiller features glossary.

www.husqvarna.com

153

TB 1000

Power, W 1000Battery type Rechargeable sealed

lead acid batteryBattery capacity, Ah 12Battery voltage, V 36Battery pack weight, lbs 26.5Operating time, min * 30 – 45Average battery charging time, hours 6 – 8Number of tines 6Tine diameter, in 0.9Cultivating width (with 6 tines), inches 18.5Number of tine speeds, forward / reverse 3 / 1Rotational speeds forward, rpm 64 / 136 / 160Rotational speed reverse, rpm 64Weight, lbs 70Ergonomic soft-grip handlebarTouch-controlsTurbo speedReverse speedHorizontally adjustable handlebarVertically adjustable handlebarFoldable handlebarBattery indicator lampRemovable battery packDouble transport wheels

= Available * Depending on ground conditions (when fully charged).

DRT900LS DRT900H DRT900E DRT900 CRT1350LS CRT900 FT900

Engine manufacturer Honda Honda Briggs & Stratton Briggs & Stratton Briggs & Stratton Briggs & Stratton Briggs & StrattonEngine type GCV160 GCV160 900 Series OHV 900 Series OHV 1350 Series OHV 900 Series OHV 900 Series OHVCylinder displacement, cc 160 160 205 205 305 205 205Torque power * (ft.-lb.) 6.9 6.9 9.0 9.0 14.5 9.0 9.0Fuel tank volume, quarts 2.0 2.0 3.0 3.0 4.0 3.0 3.0Cultivator type Rear tine Rear tine Rear tine Rear tine Rear tine Rear tine Front tineCultivating width, inches 19 17 17 17 21 14 12 / 24 / 26Cultivating depth, inches 6.5 6.5 6.5 6.5 7 6 6.5Depth adjustment step 7 7 7 7 7 7 6Rotational speed, rpm 190 190 190 190 299 210 118Transmission Gear Gear Gear Gear Gear Gear ChainTransmission steps, forward / reverse 1 / 1 1 / 1 1 / 1 1 / 1 1 / 1 1 / 1 1 / 1Approximate weight, lbs 200 200 200 200 250 190 100Dual-rotating tines ― ― ―Counter-rotating tines ― ― ― ― ―Electric start ― ― ― ― ― ―Vertically adjustable handlebarTransport wheel / s ― ― ― ― ― ―Driven wheels ―Drag barPlant guards ― ―Handlebar-mounted gear selection ―Reverse gearboxHeavy tread agricultural tires ―Counterweight ―Adjustable depth barTine shield



ACCESSORIES TB 1000RidgerMoss rakeEdger

= Available S = Standard

Ridger.For ridging garden bed furrows.

Moss rake.Clears thatch from your lawn.

Edger.For trimming edges.

154


Effi ciency.The two-stage system with auger, grinds down the snow before it reaches the impeller, then efficiently throws it away even when snow is packed or hard frozen. Variable ground speed means you always get optimal working capacity.

Durability.Rugged, heavy duty welded steel plate construction and sturdy wheels with heavy-tread tires make these snow throwers both effective and durable. The Briggs & Stratton engines are made especially for snow throwers for hard work in extreme weather.

Ergonomics.Levers and controls are within easy reach of the operator. Power steering gives the option of disconnecting the differential lock, making the snow thrower extra easy to maneuver. Heated handles and electric starter offer more comfortable operation.

Two-stage system. Efficient snow clearing.

Power steering and variable drive speed. Makes maneuvering and operating easy.

Electric starter. Connects to power outlet for easy starting in difficult conditions.

Features shown are available on select models. www.husqvarna.com

155

TECHNICAL SPECIFICATIONS 16530SB-XLS 15530SB-XLS 13524SB-XLS

Engine manufacturer Briggs & Stratton Briggs & Stratton Briggs & Stratton

Engine type Snow Series MAX Snow Series MAX Snow Series MAX

Engine name 1650 Series 1550 Series 1350 Series

Cylinder displacement, cc 342 342 305

Power, gross torque * 16.5 15.5 13.5


Working width, inches 30 30 24

Tire size, inches 16 × 6.5 16 × 6.5 16 × 4.8

Electric starter

Two-stage system

Power steering

Heated handles

High speed impeller


When you want reliability and performance these Husqvarna snow throwers are an

excellent choice. Designed to handle various levels of snow coverage and engineered to

provide the best snow clearing experience.

EFFICIENT SNOW CLEARING

Reliable snow clearing just like the experts.These high-capacity Husqvarna snow throwers, designed for the ease and convenience that homeowners and land-owners expect, feature an efficient two-stage auger /impeller system for first class clearing and ejection. All models have electric start for effortless starting in cold conditions and feature variable drive speed controlled by a lever on the panel. A differential lock enabling the machine to be driven with both wheels and X-trac heavy-tread tires

ensure extra traction. XL models are equipped with power steering which gives the option of disconnecting the differential lock, making the snow thrower easy to maneuver. Levers and controls are within easy reach of the operator. XLS models also feature hydrostatic transmissions, high speed impellers and weight bars for the most demanding snow removal tasks.

156

PROFESSIONAL RESULTS

Professional results with LS snow throwers.LS series snow throwers were developed with discriminating landowners in mind. With a heavy-duty auger housing and an aggressively serrated auger, you are ready for any storm mother nature delivers. Premium engines, precision controls and features focused on comfortable operation eliminate concerns about adverse weather conditions.

The LS series includes Briggs & Stratton Snow Max engines which are capable of moving through 23" snow depths while clearing 30" paths. Hand warmers provide added comfort. Levers on the control panel adjust the direction and pitch of the snow discharge chute.

Tackling winter chores in adverse weather doesn’t have to be such a big job. Choose an LS snow

thrower and keep a clear path ahead.

TECHNICAL SPECIFICATIONS 15530SB-LS 14527SB-LS


Engine type Snow Series MAX Snow Series MAX

Engine name 1550 Series 1450 Series


Power, gross torque * 15.5 14.5


Working width, inches 30 27

Tire size, inches 16 × 4.8 16 × 4.8

Electric starter

Two-stage system

Power steering

Heated handles

Drift cutter


157

BUILT FOR TOUGH TASKS

Husqvarna 1827SB Husqvarna 12524SB Husqvarna 924SB

Two-stage snow throwers for tough tasks.These two-stage snow throwers are well suited for home-owners who live in areas with moderate to heavy annual snowfall accumulation. Designed for clearing 24 - 27" swaths through sidewalks and driveways, you’ll never have to worry about shoveling snow again. All three models are

powered by reliable Husqvarna engines, designed to prevent ice build-ups and shutdowns. These models also feature a single motion lever control for the discharge chute and a standard flood light to illuminate your pathway when the days are short.

Power your way all winter with one of our two-stage snow throwers. Ideal for homeowners who have

moderate to heavy annual snow fall.

TECHNICAL SPECIFICATIONS 1827SB 12524SB 924SB

Engine manufacturer Husqvarna Husqvarna Husqvarna

Engine type OHV OHV OHV

Cylinder displacement, cc 414 291 208

Power, gross torque * 18.0 12.5 9.0


Working width, inches 27 24 24

Tire size, inches 16 × 4.8 16 × 4.8 13 × 5.0

Electric starter

Two-stage system

Remote chute rotation

Headlight

Heavy duty shoes


158

16530SB-XLS 15530SB-XLS 13524SB-XLS 15530SB-LS 14527SB-LS 1827SB 12524SB 924SB

Engine manufacturer Briggs & Stratton Briggs & Stratton Briggs & Stratton Briggs & Stratton Briggs & Stratton Husqvarna Husqvarna Husqvarna

Engine type Snow Series MAX Snow Series MAX Snow Series MAX Snow Series MAX Snow Series MAX OHV OHV OHV

Engine name 1650 Series 1550 Series 1350 Series 1550 Series 1450 Series N / A N / A N / A

Cylinder displacement, cc 342 342 305 342 305 414 291 208

Power, gross torque * 16.5 15.5 13.5 15.5 14.5 18.0 12.5 9.0

Fuel tank volume, quarts 4.0 4.0 4.0 4.0 3.0 2.0 2.0 2.0

Working width, inches 30 30 24 30 27 27 24 24

Intake height, inches 23 23 23 23 23 23 23 23

Auger diameter, inches 12 12 12 12 12 12 12 12

Tire size, inches 16 × 6.5 16 × 6.5 16 × 4.8 16 × 4.8 16 × 4.8 16 × 4.8 16 × 4.8 13 × 5.0

Headlight Halogen Halogen Halogen Halogen Halogen Flood Flood Flood

Two-stage system

Electric starter

Power steering ― ― ―

Differential lock ― ― ― ― ―

Variable drive speed

Heated handles ― ― ―

Heavy duty auger ― ― ―

Heavy duty auger housing ― ― ―

Premium control cables ― ― ―

Lever-controlled ejector

Lever-controlled defl ector

Defl ector extension

High speed impeller ― ― ― ― ―

Clearing tool

Cutter for snow banks ― ― ―

X-trac, heavy-tread tires

Heavy duty shoes

Adjustable shoes ― ― ―

Tire chains ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( )


Two-stage system.Snow is effi ciently fed into the machine by an auger. Then it is blown out with a high-speed fan.

Electric starter.Connect to a power outlet and start the engine by pressing a button. Use the additional starter cord when away from an outlet.

Power steering.With the touch of a trigger you can easily steer the machine for better maneuverability.

Differential lock.The differential lock means the machine is driven with both wheels. This, along with the heavy treads on the tires, ensures extra traction.

Variable drive speed.Pick the speed that’s comfrtable for you, both forward and reverse. Controlled by a lever on the panel.

Heavy duty auger.The robust auger provides fi rst class results operating in frozen as well as extremely wet snow.

TECHNICAL FEATURES

Heated handles.For more comfortable operation in cold climates.

Heavy duty auger housing.The durable auger housing ensures sturdy operation, effi cient snow clearing and long product life.

Premium control cables.Durable cables for long life, with improved resistance to cold weather.

Chute rotation.It’s easy to change the direction of the chute with a lever on the panel.

Defl ector control.Control the vertical throwing direction with a lever on the panel.

Defl ector extension.Improves operating conditions in extremely light and dry snow as well as making snow clearing in windy weather more comfortable.

High speed impeller.Provides extra long snow throwing distance, 50% farther than a standard impeller.

The Husqvarna snow thrower features glossary.

159

16530SB-XLS 15530SB-XLS 13524SB-XLS 15530SB-LS 14527SB-LS 1827SB 12524SB 924SB

Engine manufacturer Briggs & Stratton Briggs & Stratton Briggs & Stratton Briggs & Stratton Briggs & Stratton Husqvarna Husqvarna Husqvarna

Engine type Snow Series MAX Snow Series MAX Snow Series MAX Snow Series MAX Snow Series MAX OHV OHV OHV

Engine name 1650 Series 1550 Series 1350 Series 1550 Series 1450 Series N / A N / A N / A

Cylinder displacement, cc 342 342 305 342 305 414 291 208

Power, gross torque * 16.5 15.5 13.5 15.5 14.5 18.0 12.5 9.0

Fuel tank volume, quarts 4.0 4.0 4.0 4.0 3.0 2.0 2.0 2.0

Working width, inches 30 30 24 30 27 27 24 24

Intake height, inches 23 23 23 23 23 23 23 23

Auger diameter, inches 12 12 12 12 12 12 12 12

Tire size, inches 16 × 6.5 16 × 6.5 16 × 4.8 16 × 4.8 16 × 4.8 16 × 4.8 16 × 4.8 13 × 5.0

Headlight Halogen Halogen Halogen Halogen Halogen Flood Flood Flood

Two-stage system

Electric starter

Power steering ― ― ―

Differential lock ― ― ― ― ―

Variable drive speed

Heated handles ― ― ―

Heavy duty auger ― ― ―

Heavy duty auger housing ― ― ―

Premium control cables ― ― ―

Lever-controlled ejector

Lever-controlled defl ector

Defl ector extension

High speed impeller ― ― ― ― ―

Clearing tool

Cutter for snow banks ― ― ―

X-trac, heavy-tread tires

Heavy duty shoes

Adjustable shoes ― ― ―

Tire chains ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( )


TIPS BEFORE BUYING

What to consider before making your choice.When choosing a snow thrower you should consider the size of the area you wish to clear and the typical snow conditions in your part of the country. A snow thrower with a powerful engine and wide working width will save you time if the area is large and covered in deep, heavy snow. Smaller areas covered in dry snow require less power.

Choose an LS model for clearing in heavier conditions. The ■

extra durability features can prolong the product’s life.

Choose an XLS model for clearing larger areas. The ■

durability features, coupled with the high speed impeller will make the job easier for many winters to come.

Visit the Husqvarna web page for our full range of snow throwers and accessories. Here you’ll find additional advice to help you decide which machine is right for the job you have in mind. For more information regarding your purchase, contact your Husqvarna servicing dealer.


Halogen headlight.For easy operation in challenging conditions.

Clearing tool.Clearing out ice and debris is easy with this included accessory.

Cutter for snow banks.Improves performance in deep drifted snow.

X-trac, heavy-tread tires.Improve traction in the iciest conditions.

Heavy duty shoes.Shoes are more durable and are double-sided for twice the life expectancy over standard shoes.

Adjustable shoes.Makes it possible to adjust the space between the auger housing and the ground in order to protect the ground /surface.

160

Husqvarna 1365GN Husqvarna 420GN

Electricity where you need it.When work comes first, our Husqvarna generators supply reliable power where you need it. Whether you need to recharge tools on the job site or would like to power a light at the camp site, we have a generator just right for you. The 1365GN features 120 Volt, 240 Volt and 12 Volt DC charging. Its commercial grade Honda engine is the force

behind its dependable, quiet operation and can handle all your contractor requirements. The compact 420GN provides high power in a small package. The standard wheel kit, small profile and light weight make this generator a must for the job site, camp site or home.

Avoid the problems of power failures or a lack of power source with one

of our generators. Probably one of the most useful machines you can have,

as you never know when you may need one.

TECHNICAL SPECIFICATIONS 1365GN 420GN

Engine manufacturer Honda Mitsubishi

Engine type GX 390 Elite Series OHV

Cylinder displacement, cc 389 ―

Power, hp * ― 4.0


Wattage 6500 2000

Surge wattage 8125 3000

Run time (half load), hours 11 4.9

120 Volt AC outlets 4 GFCI 2

12 Volt DC battery charger

120 / 240 Volt AC Twist Lock 1 Twist lock ―

Standard wheel kit


PORTABLE POWER

161

Husqvarna 5525PWHusqvarna 6027PWHusqvarna 9032PWHusqvarna 1340PW

TECHNICAL SPECIFICATIONS 1340PW 9032PW 6027PW 5525PW

Engine manufacturer Honda Honda Honda Honda

Engine type GX390 GX270 GX160 GCV160

Cylinder displacement, cc 390 270 163 160

Pounds / square inch, PSI 4000 3200 2750 2500

Gallons per minute, GPM 3.5 3.0 2.5 2.4

Pump CAT® CAT® CAT® Lavor

Pump style Camshaft Camshaft Camshaft Axial

Detergent injection Pick-up tube Pick-up tube Pick-up tube Pick-up tube

High PSI hose, diameter × length 3/8" × 50' 3/8" × 50' 5/16" × 25' 5/16" × 25'

Professional spray gun ―

Detergent spray tip

= Available ― = Not available

Cleans homes, driveways, cars, decks and grills. In fact, the uses for our pressure

washers are endless. So add a new dimension to your outdoor projects.

MADE FOR CLEANING

Commercial and general purpose pressure washers.Wash away the dirt and grime with Husqvarna’s broad line of power cleaning equipment. Our pressure washers feature CAT® or Lavor pumps, commercial Honda engines and detergent injection. Cleaning a home, driveway, car, deck

or grill will be a snap with a Husqvarna pressure washer. Husqvarna’s full line of pressure washers are designed to handle the daily demands of professionals and homeowners alike.

162

www.husqvarna.com


Safety.A certifi ed roll over protection system (ROPS) and integrated seat belts provide peace of mind in off-road applications.

Versatility.Two inch front and rear receivers convert the off-road transport into a serious towing machine.

Available in all-wheel drive, four wheel drive and two-wheel drive versions.

Choice of orange, green or Realtree Hardwoods Green HD® camouflage.

Effi ciency.Available in all-wheel drive with automatic locking front and rear differentials, which allows you to focus on driving without complicated procedures for off-road travel.

Diesel, gas and electric powertrain options.

Certified roll-over protection.


163

TECHNICAL SPECIFICATIONS HUV4421GXL HUV4421DXL

Engine Kawasaki Kubota

Engine type FH680D D722 Diesel

Power, hp * 23 20

Frame Aluminum Aluminum

Certifi ed Rollover Protection System (ROPS) Standard Standard

AWD / 4-wheel drive Automatic AWD Automatic AWD

Forward speed, mph 25 25

Drive type High ratio CVT High ratio CVT

Brakes 4-wheel hydraulic disc 4-wheel hydraulic disc

Bed load capacity, lbs 800 800

Weight, lbs 1605 1786


Moving manpower and materials.With two forward facing bench seats, this 4-person utility vehicle has the payload to get the job done. With an 800 lb. bed capacity and a 1,600 lb. vehicle load capacity, everything arrives in one trip. All-wheel drive, auto-locking front and

rear differentials and certified roll-over protection assure that no work location is out of your reach. Available in orange, green or Realtree Hardwoods Green HD® camouflage.

MAXIMUM TRANSPORT

Four passenger seating and a bed load capacity close to one half ton makes this utility vehicle

the ultimate transporter.

164

Automatic all-wheel drive with auto-locking front and rear differentials

make these utility vehicles the ultimate choice in severe off-road applications.

Make your own road.Tackle any job, go practically anywhere, with the “easiest to drive” utility vehicles available. Husqvarna’s 4421 series all-wheel drive HUV has the traction, power and payload to take you places you’ve never been before.

The all-wheel drive HUV splits the razor’s edge between heavy-duty work machine and severe off-road transport.Available in orange, green or Realtree Hardwoods Green HD® camouflage.

EXTREME OFF-ROAD

TECHNICAL SPECIFICATIONS HUV4421GXP HUV4421DXP HUV4421G HUV4421D

Engine Kawasaki Kubota Kawasaki Kubota

Engine type FH680D D722 Diesel FH680D D722 Diesel

Power, hp * 23 20 23 20

Frame Aluminum Aluminum Aluminum Aluminum

Certifi ed Rollover Protection System (ROPS) Standard Standard Standard Standard

AWD / 4-wheel drive Automatic AWD Automatic AWD Automatic AWD Automatic AWD

Forward speed, mph 25 25 25 25

Drive type High ratio CVT High ratio CVT High ratio CVT High ratio CVT

Brakes 4-wheel hydraulic disc 4-wheel hydraulic disc 4-wheel hydraulic disc 4-wheel hydraulic disc

Bed load capacity, lbs 800 800 800 800

Weight, lbs 1621 1750 1430 1559

Severe off-road package Standard Standard ― ―


165

Value and performance packed into a mid-size utility vehicle available in

two and four-wheel drive.

Pick the road less traveled.Whether you are working on the farm, on your way to your favorite hunting spot or just out for an off-road drive, the HUV4414 series is the perfect match for your outdoor activities. Independent front and rear suspension assures maximum comfort on rough terrain. Available in 2-wheel drive or 4-wheel drive with a full range of

accessories, the mid-size HUV adapts to almost any requirement. Available in orange, green or Realtree Hardwoods Green HD® camouflage. For full-size two-wheel drive and compact two-wheel drive versions please see the chart on page 166-167 and visit www.husqvarna.com.

EXCEPTIONAL TRACTION AND RIDE QUALITY

TECHNICAL SPECIFICATIONS HUV4414GXP HUV4414G HUV4214G

Engine Briggs & Stratton Briggs & Stratton Briggs & Stratton

Engine type Vanguard Vanguard Vanguard

Power, hp * 14 14 14

Frame Steel Steel Steel

Certifi ed Rollover Protection System (ROPS) Standard Standard Standard

4-wheel drive / 2-wheel drive 4-wheel drive 4-wheel drive 2-wheel drive

Forward speed, mph 25 25 25

Drive type High ratio CVT High ratio CVT High ratio CVT

Brakes 4-wheel hydraulic disc 4-wheel hydraulic disc 4-wheel hydraulic disc

Bed load capacity, lbs 400 400 400

Weight, lbs 1275 1210 1200

Severe off-road package Standard ― ―


166

All-Wheel drive.Fully automatic all-wheel drive operates in one, two, three or four wheel drive. Allows you to focus on driving without levers and switches to complicate your travels.

Front and rear locking differentials.Automatic front and rear locking differentials assure maximum traction in severe off-road situations. Available on all-wheel drive models.

Certifi ed roll-over protection.A certifi ed roll cage and seat belts provide security in adverse conditions.

All aluminum box tube and I-beam frames.A rigid T6061 aircraft grade aluminum frame provides durability in wet regions, muddy conditions and coastal areas, as well as in fertilizer and chemical applications. Available on most models.

CVT.Continuously variable transmission that allows operation of the machine from low to high speeds without changing gears.

Vehicle load capacity.The total amount of weight considering passengers and materials.

Bed load capacity.The amount of weight that can be loaded into the vehicle’s bed.

The Husqvarna Utility Vehicles features glossary.

HUV4421GXL HUV4421DXL HUV4421GXP HUV4421DXP HUV4421G HUV4421D HUV4414GXP HUV4414G HUV4214G HUV4213GXP HUV4213G HUV4210GXP HUV4210EXP HUV4210G HUV4210E

Engine Kawasaki FH680D Kubota D722 Kawasaki FH680D Kubota D722 Kawasaki FH680D Kubota D722 Vanguard Vanguard Vanguard Kawasaki Kawasaki Kawasaki 48V Electric Motor Kawasaki 48V Electric

MotorPower, hp * 23 20 23 20 23 20 14 14 14 13 13 11.5 ― 9.5 ―

Certifi ed ROPS Standard Standard Standard Standard Standard Standard Standard Standard Standard ― ― ― ― ― ―

Frame Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Steel Steel Steel Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum

AWD / 4-wheel drive Automatic AWD Automatic AWD Automatic AWD Automatic AWD Automatic AWD Automatic AWD 4-wheel drive 4-wheel drive ― ― ― ― ― ― ―Differential lock engagement, front and rear Automatic

front and rearAutomatic





front and rear Rear Rear Rear Rear, shift-on-fl y

Rear, shift-on-fl y N/A N/A N/A N/A

Drive type High ratio CVT High ratio CVT High ratio CVT High ratio CVT High ratio CVT High ratio CVT High ratio CVT High ratio CVT High ratio CVT Unitizedtransaxle

Unitized transaxle

Unitized transaxle Direct drive Unitized

transaxle Direct drive

Vehicle load capacity, lbs 1,600 1,600 1,200 1,200 1,200 1,200 925 925 925 1,200 1,200 800 800 800 800

High capacity option (vehicle load), lbs ― ― 1,450 1,450 1,450 1,450 ― ― ― ― ― ― ― ― ―

Bed load capacity, lbs 800 800 800 800 800 800 400 400 400 800 800 300 300 300 300

High capacity option (bed load), lbs ― ― 1,050 1,050 1,050 1,050 ― ― ― ― ― ― ― ― ―

Bed load size (L × W × H), inches 48.0 × 49.8 × 10.9 48.0 × 49.8 × 10.9 48.0 × 49.8 × 10.9 48.0 × 49.8 × 10.9 48.0 × 49.8 × 10.9 48.0 × 49.8 × 10.9 33.8 × 47.3 × 10.0 33.8 × 47.3 × 10.0 33.8 × 47.3 × 10.0 48.0 × 49.8 × 10.9 48.0 × 49.8 × 10.9 48.0 × 49.8 × 10.9 48.0 × 49.8 × 10.9 48.0 × 49.8 × 10.9 48.0 × 49.8 × 10.9Front / rear suspension Dual A-arm/

swing armDual A-arm/swing arm

Dual A-arm/swing arm




4-wheel independent

4-wheel independent

4-wheel independent

Single A-arm/semi-ind. leaf


Leaf Spring and Dual Hydr.

Shocks


Shocks


Shocks


ShocksTransmission Covered CVT Covered CVT Sealed CVT Sealed CVT Covered CVT Covered CVT Sealed CVT Covered CVT Open CVT Open CVT Open CVT Open CVT Sealed

Direct Drive Open CVT Sealed Direct Drive

Forward speed, miles/hour 25 25 25 25 25 25 25 25 25 17 – 19 17 – 19 17 – 19 17 – 19 17 – 19 17 – 19

Brakes 4-wheel hydraulic disc

4-wheel hydraulic disc








4-wheel hydraulic drum


Rear Mechanical Drum




Tires 25 × 10.5-12 Trail 25 × 11-12 Mud 25 × 11-12 Mud 25 × 11-12 Mud 25 × 10.5-12 Trail 25 × 10.5-12 Trail (F) 25 × 9-12 Mud(R) 25 × 11-12

(F) 25 × 9-12 Trail(R) 25 × 11-12

(F) 25 × 9-12 Trail(R) 25 × 9-12 23 × 10.5-12 Trail 23 × 10.5-12 Trail 20 × 10-8 Trail 20 × 10-8 Trail 20 × 10-8 Trail 20 × 10-8 Trail

Fuel tank capacity, gallons 6.5 6.5 6.5 6.5 6.5 6.5 5.2 5.2 5.2 7 7 7 N/A 7 N/A

Length / Width / Height, inches 120 / 60 / 80 122 / 60 / 80 122 / 60 / 80 122 / 60 / 80 120 / 60 / 80 120 / 60 / 80 105 / 55 / 73 105 / 55 / 73 105 / 55 / 73 120.4 / 54 / 76 117.5 / 54 / 51 101 / 53 / 48 101 / 53 / 48 100.5 / 49.5 / 48 100.5 / 49.5 / 48

Ground clearance-differential, inches 7.4 7.4 7.4 7.4 7.4 7.4 9.0 9.0 9.0 6.6 6.6 5.5 5.5 5.5 5.5

Dry weight, lbs 1605 1786 1621 1750 1430 1559 1275 1210 1200 1110 1045 805 889 781 874

Vehicle warranty, year, limited 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Severe off-road package 1), 2) ― ― Standard Standard ― ― Standard ― ― ― ― ― ― ― ―

Off-road upgrade package 3) ― ― ― ― ― ― ― ― ― Standard ― ― ― ― ―

Luxury and off-road package 4) ― ― ― ― ― ― ― ― ― ― ― Standard Standard ― ―

― = Not available * Engine power values are as rated by the engine manufacturer.1) = 4421 XP Severe off-road package includes mud tires, heavy duty brush guard, nerf bars, front and rear differential guards, skid plate, sealed CVT and power tilt bed.2) = 4414 XP Severe off-road package includes mud tires, sealed CVT cover, brush guard, front, center and rear skid plates, front and rear CV boot guards and a 2" reciever.3) = 4213 XP Off-road package includes tube bumper, power lift bed, light bar with lights and nerf bars.4) = 4210 XP Luxury and off-road package includes a 12 volt accessory plug, brush guard, side-step bars, rear differential guard, chrome wheel covers, lockable glove box and 2 additional horsepower on the gas model.

TECHNICAL FEATURES

167

TIPS BEFORE BUYING

What to consider before making your choice.Terrain is one of the most important considerations when choosing a utility vehicle. Two-wheel drive will usually handle all of your mild terrain uses. Mild to moderate terrain use should utilize a two-wheel drive with a locking rear differential. Moderate to severe terrain requires the traction of four-wheel drive. For the most severe applications, all-wheel drive with front and rear locking differentials is the optimum choice of traction systems.

Consider your primary plans for the vehicle and the many ■

other multiple uses for your machine to assure you select the correct size utility vehicle. With availability in compact, mid-size, full size, four seat and two seat versions, many options are at hand for the customer.

HUV4421GXL HUV4421DXL HUV4421GXP HUV4421DXP HUV4421G HUV4421D HUV4414GXP HUV4414G HUV4214G HUV4213GXP HUV4213G HUV4210GXP HUV4210EXP HUV4210G HUV4210E

Engine Kawasaki FH680D Kubota D722 Kawasaki FH680D Kubota D722 Kawasaki FH680D Kubota D722 Vanguard Vanguard Vanguard Kawasaki Kawasaki Kawasaki 48V Electric Motor Kawasaki 48V Electric

MotorPower, hp * 23 20 23 20 23 20 14 14 14 13 13 11.5 ― 9.5 ―

Certifi ed ROPS Standard Standard Standard Standard Standard Standard Standard Standard Standard ― ― ― ― ― ―

Frame Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Steel Steel Steel Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum

AWD / 4-wheel drive Automatic AWD Automatic AWD Automatic AWD Automatic AWD Automatic AWD Automatic AWD 4-wheel drive 4-wheel drive ― ― ― ― ― ― ―Differential lock engagement, front and rear Automatic






front and rear Rear Rear Rear Rear, shift-on-fl y

Rear, shift-on-fl y N/A N/A N/A N/A

Drive type High ratio CVT High ratio CVT High ratio CVT High ratio CVT High ratio CVT High ratio CVT High ratio CVT High ratio CVT High ratio CVT Unitizedtransaxle

Unitized transaxle

Unitized transaxle Direct drive Unitized

transaxle Direct drive

Vehicle load capacity, lbs 1,600 1,600 1,200 1,200 1,200 1,200 925 925 925 1,200 1,200 800 800 800 800

High capacity option (vehicle load), lbs ― ― 1,450 1,450 1,450 1,450 ― ― ― ― ― ― ― ― ―

Bed load capacity, lbs 800 800 800 800 800 800 400 400 400 800 800 300 300 300 300

High capacity option (bed load), lbs ― ― 1,050 1,050 1,050 1,050 ― ― ― ― ― ― ― ― ―

Bed load size (L × W × H), inches 48.0 × 49.8 × 10.9 48.0 × 49.8 × 10.9 48.0 × 49.8 × 10.9 48.0 × 49.8 × 10.9 48.0 × 49.8 × 10.9 48.0 × 49.8 × 10.9 33.8 × 47.3 × 10.0 33.8 × 47.3 × 10.0 33.8 × 47.3 × 10.0 48.0 × 49.8 × 10.9 48.0 × 49.8 × 10.9 48.0 × 49.8 × 10.9 48.0 × 49.8 × 10.9 48.0 × 49.8 × 10.9 48.0 × 49.8 × 10.9Front / rear suspension Dual A-arm/

swing armDual A-arm/swing arm





4-wheel independent

4-wheel independent

4-wheel independent




Shocks


Shocks


Shocks


ShocksTransmission Covered CVT Covered CVT Sealed CVT Sealed CVT Covered CVT Covered CVT Sealed CVT Covered CVT Open CVT Open CVT Open CVT Open CVT Sealed

Direct Drive Open CVT Sealed Direct Drive

Forward speed, miles/hour 25 25 25 25 25 25 25 25 25 17 – 19 17 – 19 17 – 19 17 – 19 17 – 19 17 – 19

Brakes 4-wheel hydraulic disc















Tires 25 × 10.5-12 Trail 25 × 11-12 Mud 25 × 11-12 Mud 25 × 11-12 Mud 25 × 10.5-12 Trail 25 × 10.5-12 Trail (F) 25 × 9-12 Mud(R) 25 × 11-12

(F) 25 × 9-12 Trail(R) 25 × 11-12

(F) 25 × 9-12 Trail(R) 25 × 9-12 23 × 10.5-12 Trail 23 × 10.5-12 Trail 20 × 10-8 Trail 20 × 10-8 Trail 20 × 10-8 Trail 20 × 10-8 Trail

Fuel tank capacity, gallons 6.5 6.5 6.5 6.5 6.5 6.5 5.2 5.2 5.2 7 7 7 N/A 7 N/A

Length / Width / Height, inches 120 / 60 / 80 122 / 60 / 80 122 / 60 / 80 122 / 60 / 80 120 / 60 / 80 120 / 60 / 80 105 / 55 / 73 105 / 55 / 73 105 / 55 / 73 120.4 / 54 / 76 117.5 / 54 / 51 101 / 53 / 48 101 / 53 / 48 100.5 / 49.5 / 48 100.5 / 49.5 / 48

Ground clearance-differential, inches 7.4 7.4 7.4 7.4 7.4 7.4 9.0 9.0 9.0 6.6 6.6 5.5 5.5 5.5 5.5

Dry weight, lbs 1605 1786 1621 1750 1430 1559 1275 1210 1200 1110 1045 805 889 781 874

Vehicle warranty, year, limited 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Severe off-road package 1), 2) ― ― Standard Standard ― ― Standard ― ― ― ― ― ― ― ―

Off-road upgrade package 3) ― ― ― ― ― ― ― ― ― Standard ― ― ― ― ―

Luxury and off-road package 4) ― ― ― ― ― ― ― ― ― ― ― Standard Standard ― ―


Roll-over protection systems are a critical component for ■

users planning on moderate and more difficult terrain types. ROPS are extremely important to recreational riders who encounter unknown obstacles and terrain types.

Vehicle and bed load capacities should be reviewed to assure ■

the machine will meet the requirements for carrying intended materials and passengers.

Engine type should always be evaluated to assure the ■

correct amount of power and torque is included for the machine’s primary purpose. Choices of diesel, gas and electric power trains provide many options for end-users.

Visit the Husqvarna web page for our full range of utility vehicles and accessories. Here you’ll find additional advice to help you decide which machine is right for the job you have in mind. For more information regarding your purchase, contact your Husqvarna servicing dealer.

www.husqvarna.com

7349 Statesville Road, Charlotte, NC 28269www.husqvarna.com

Copyright © 2010 Husqvarna AB (publ). All rights reserved. Husqvarna and other product and/or feature marks are trademarks of the Husqvarna Group as displayed at www.international.husqvarna.com

For the dealer nearest you, visit our website at www.husqvarna.com

Husqvarna Product Catalogue 2010 - US

Documents

Transcript of Husqvarna Product Catalogue 2010 - US