Huawei u8350
Transcript of Huawei u8350
-
7/28/2019 Huawei u8350
1/2
Version:
Author:Approved by:
Vendor HuaweiModel u8350 2.2.2Chipset 800 MHz processor
Sw release b681
IMEI 868783000000515
3G/HSDPA
Gerencia de Ingeniera de Terminalesy Acceso Inalambrico
Mobile Handset
-
7/28/2019 Huawei u8350
2/2
Ingeniera de Terminales y Acceso Inalambrico
INTERSYSTEM TEST
Inter RAT in Idle
1 Start under 3G coverage (verify PDP context active) Done OK % OK
2 Send mail (Exchange) 10 10 100%
3 Receive mail (Exchange)
4 Move into 2G area
5 Send mail (Exchange)
6 Receive mail (Exchange)
7 Move into 3G area (verify PDP context activation)
8 Repeat 9 times from step 2
Inter RAT in DCH (UDI)1 Start under 3G coverage (verify PDP context active) Done OK % OK
2 MT UDI call _ _ _
3 MO UDI call
4 Mantain UDI call until get to 2G area
5 MT call
6 MO call
7 Move into 3G area (verify PDP context activation)
8 Repeat 9 times from step 2
UDI= multimedia call (video) 64 kb/s
Inter RAT in FACH - (Browsing)
1 Start under 3G coverage (verify PDP context active) Done OK % OK
2 MT call 10 10 100%
3 MO call
4 Activate browser, and wait until UE moves into FACH5 Mantain FACH state until UE gets to 2G area
6 Continue browsing session (verify Inter RAT cell change and PDP context active)
7 MT call
8 MO call
9 Move into 3G area (verify PDP context active)
10 Repeat 9 times from step 4
Inter RAT in DCH - (Browsing)
1 Start under 3G coverage (verify PDP context active) Done OK % OK
2 MT call _ _ _
3 MO call
4 Activate browser, and wait until UE moves into DCH
5 Mantain DCH state until UE gets to 2G area
6 Continue browsing session (verify Inter RAT cell change and PDP context active)7 MT call
8 MO call
9 Move into 3G area (verify PDP context active)
10 Repeat 9 times from step 4
Streaming Session-(Band Selection: Automatic Mode)
http://m.youtube.com Done OK % OK
5 minutes streaming sessions 10 10 100%
AMR= 3G voice codec
Cell selection after LACK OF COVERAGE (Network selection set to 3G locked)
Cell selection after lack of coverage - 3G locked Mode
1 Start under 3G coverage (verify PDP context active) Done OK % OK
2 Send mail (Exchange) 10 10 100%
3 Receive mail (Exchange)
4 Move out of 3G coverage
5 Wait for minimum N min (N to be defined)
6 Move into 3G area (Verify PDP context activation)
7 Repeat 9 times from step 2
Cell Selection after lack of coverage in DCH (Browsing) - 3G locked Mode
1 Start under 3G coverage (verify PDP context active) Done OK % OK
2 Send mail (Exchange) 10 10 100%3 Receive mail (Exchange)
4 Activate browser, and wait until UE moves into DCH
5 Mantain DCH state, by download file, until UE gets out from 3G area
6 Wait for minimum N min (N to be defined)
7 Move into 3G area (verify PDP context activation)
8 Repeat 9 times from step 4
MULTI RAB (Full 3G Coverage) Done OK % OK
Setup an AMR call. Start and complete a 5MB GET data transfer. Release AMR call when GET is over. 10 10 100%
Setup an AMR call. Start and complete a 5MB PUT data transfer. Release AMR call when PUT is over. 10 10 100%
Multicall: set up a MO AMR call while a PS connection is ongoing. 10 10 100%
Multicall: set up a MT AMR call while a PS connection is ongoing. 10 10 100%
Tested 3G Phone
Tested 3G Phone
Tested 3G Phone
Tested 3G Phone
Tested 3G Phone
Tested 3G Phone
Tested 3G Phone
Tested 3G Phone
http://m.youtube.com/http://m.youtube.com/