Huawei Networking Products News and FAQ
Transcript of Huawei Networking Products News and FAQ
-
7/25/2019 Huawei Networking Products News and FAQ
1/21
Huawei Networking Products News and FAQ
Home
Buy Huawei
About Huanetwork.com
Huanetwork.com is a world leading Huawei networking products distributor, we wholesale original new Huawei networking equipments, including Huawei switches, Huawei
routers, Huaweisymantec security products, Huawei IAD, Huawei SFP and other Huawei networking products.
Categories
FTTx Product Troubleshooting Cases(3)
Huawei AR151(2)
Huawei AR18-31e router(1)
Huawei MA5600(5)
Huawei MA5600T(4)
Huawei MA5603T(4)
Huawei NE40E(2)
Huawei Router(48)
huawei router configuration(2)
Huawei Router Purchase Guide(1)
Huawei S1700(3)
Huawei S1700 FAQ(1)
Huawei S2300(2)
Huawei S2700(4)Huawei S3300(3)
Huawei S3700(2)
Huawei S5300(2)
Huawei S5700(15)
Huawei Switch(21)
Networking(9)
News(2)
OSN 3500(4)
S7700 & S9700 FAQ(2)
Technology(15)
Archives
February 2015
January 2015
December 2014November 2014
October 2014
September 2014
August 2014
July 2014
June 2014
May 2014
November 2013
October 2013
September 2013
August 2013
July 2013
June 2013
May 2013
April 2013
Recent Posts
How to Stack the Huawei Switches?
Obtaining the Equipment Serial Number on Huawei Switches
Huawei NE40E Routers Overview and Specification
Power Supplies Supported by the Huawei S5700
How to Log In to the Device Through a Console Port on Huawei Switches
Tags
AR151Buy Huawei routerhuawei 3500Huawei NE40Ehuawei olthuawei onuHuawei OptiXHuawei routerhuawei s1700huawei S1700 serieshuawei S1700 switchhuawei s2700huawei s3700
Huawei S5700huawei s6700Huawei SwitchHuawei SwitchesNE40E-X8optix osn 1500OptiX OSN equipmentosn 500osn1500osn 3500osn3500osn 3500 datasheetrouter huaweiS1700-8-ACS1700-8G-ACS1700-24-ACS1700-28FR-2T2P-ACS1700-52FR-2T2P-ACS1700-52GFR-4P-ACS1700-52R-2T2P-ACS1724GS1728GWR-4Ps5700 switchS5700-10P-LI-ACS5700-24TP-PWR-SIS5700-28C-EI
S5700-28C-EI-24SS5700-28C-SIS5700-48TP-PWR-SIS5700-52C-EIS5700-52C-PWR-SIS5700-52C-SI
SmartAX MA5600T Series
How to Stack the Huawei Switches?
Published by adminon 10th February 2015
Filed Under Huawei S5700, Huawei Switch, Technology
Stacking Huawei Switch
wei Networking Products News and FAQ http://www.huahardware.com/
21 13/02/2015 11:44
-
7/25/2019 Huawei Networking Products News and FAQ
2/21
The stacking function connects multiple stacking-capable devices together to logically function as one device. Up to five , S2750EIs, can be connected through stack cables in
a ring or chain topology. Up to nine devices of other models can be connected through stack cables in a r ing or chain topology. All stacked devices logically function as one
device to forward packets. There are three roles of devices in a stack: master switch, standby switch, and slave switch. All of the three types of switches are called member
switches. The Ethernet switches in a stack function as one device. You can manage all the switches in a stack by using the master switch.
Context
A stack can be set up using service interface connections or stack card connections.
The following models support service interface connections: S2750, S5700-P-LI (with GE uplink interfaces), S5700-TP-LI (with GE uplink interfaces),
S5700-X-LI (with 10GE uplink interfaces), S5720-C-EI, S5720-X-EI, S5720-PC-EI. The stacking function is not supported on the S5700-10P-LI-ACand
S5700-10P-PWR-LI-ACin the S5700-P-LI series (with GE uplink interfaces).
NOTE:
A stack ofS5700-52X-LI-48CS-ACswitches cannot be managed by the web-based network management system.
The following product models support stack card connections: S5720-C-EI, S5720-X-EI, S5720-PC-EI, S5720-P-EI.
When a switch attempts to set up a stack with a switch enabled with the stacking function but the stacking-enabled switch has some configurations that the stack does
not support, the new switch cannot join the stack and the system displays a message indicating that some configurations are not supported by the stack. As a result, the
new switch cannot be added to the stack. The new switch can be added to the stack only after these configurations are deleted.
Before the stack is established, each switch is an independent entity. Each switch has its own IP address and functions individually. Therefore, you need to manage each
switch separately. After the stack is established, all the member switches are presented as one unified logical entity. In this manner, you can manage and maintain all the
member switches in a stack by using one IP address. The stacking protocol elects the master switch, standby switch, and slave switch in a stack. Then, data can be
backed up and the active/standby switchover can be implemented.
Procedure
Configure the stack.
Choose System Management> Stackingin the navigation tree to open the Stackingpage, as shown in Figure 1.1.
NOTE:
The actual display varies depending on the device model.
Figure 1 Stacking
Table 1 describes the parameters on the Stackingpage.
Table 1 Stacking
Parameter Description
Stack Topology Type Indicates the topology type of the stack. This parameter cannot be set.
Stack System MAC Indicates the MAC address of the stack. This parameter cannot be set.
Stacking Indicates whether the stacking function is enabled.
MAC Switch Delay Time Indicates the delay of MAC address switching. This parameter takes effect after the
device is restarted.
After a switchover occurs between the master and slave switches, the MAC address of
the stack is switched to be that of the newly-elected master switch if the previous
master switch does not rejoin the stack after the switchover times out.
The MAC address switchover time of any member switch in a stack is the same as that
of the master switch.
NOTE:
By default, the MAC address switchover timer is disabled. The system performs
the MAC address switchover immediately after the active/standby switchover
occurs between switches.
If the value of the MAC address switchover timer is set to 0, it indicates that
MAC address switchover will not be performed.
wei Networking Products News and FAQ http://www.huahardware.com/
21 13/02/2015 11:44
-
7/25/2019 Huawei Networking Products News and FAQ
3/21
Set the parameters.2.
Click OK.3.
Modify the stack.
Choose System Management> Stackingin the navigation tree to open the Stackingpage.1.
The Configure Stackpage is displayed, as shown in Figure 2.2.
NOTE:
The actual display varies depending on the device model.
Figure 2 Stack Settings
Table 2 describes the parameters on the Configure Stackpage.
Table 2 Stack Settings
Parameter Description
Next Stack ID Indicates the stack ID. This parameter takes effect after the device is restarted.
Stack IDs can be configured before or after the stack is established. By default, all the
stack IDs of member switches in a stack are 0. If stack IDs are not configured for
member switches before the stack is established, the stack assigns stack IDs to member
switches after being established. After the stack is established successfully, all the
configurations of the stack can be performed on the master switch only.
Next Startup Priority Indicates the priority of the stack. This parameter takes effect after the device is
restarted.
The stack priority can be configured before or after the stack is established. If the stack
is established, this parameter must be set on the master switch; otherwise, it is set on
each switch.
Set the parameters.3.
Click OK.4.
Select the list of logical interface.
Click the standby switch or master switch of the list of switch role. The selected physical stack interfaces of the switch are displayed in the list of logical interface,
as shown in Figure 3.
1.
Figure 3 List of Logical Interfaces
Click the icon, the Configure Stack Interfacepage is displayed, as shown in Figure 4.2.
Figure 4 Configure Stack Interface
wei Networking Products News and FAQ http://www.huahardware.com/
21 13/02/2015 11:44
-
7/25/2019 Huawei Networking Products News and FAQ
4/21
Table 3 describes the parameters on the Configure Stack Interfacepage.
Table 3 Stack Interface Configuration
Parameter Description
Logical Interface Name Indicates the name of the logical interface on the device.
Selected Physical Stack In terfaces Selects an interface as the physical stack interface.
Selects the name of the interface that functions as a stack interface.3.
Click OK.4.
Return to the Tackingpage, and click Apply.5.
More related:
How to Configure ARP for Huawei Switches?
How to Configure ALS for Huawei Switches?
How to Configure the MAC Address Table for Huawei Switch?
Basic Configuration on the Device at First Login for Huawei Switches
Thread Tags: Configure Stack Interface, Huawei S5700, huawei stack, Huawei Switch, Huawei Switch configuration, huawei switch stack, Huawei Switches, Huawei
Switches stacking, S2750, S2750EIs, S5700-10P-LI-AC, S5700-10P-PWR-LI-AC, S5700-52X-LI-48CS-AC, S5700-P-LI, S5720-C-EI, S5720-PC-EI, S5720-X-EI, Stacking
Huawei Switch
comments
0
Obtaining the Equipment Serial Number on Huawei Switches
Published by adminon 5th February 2015
Filed Under Huawei S5700, Huawei Switch, Networking, Technology
When users require device after-sales service, provide the equipment serial number to the manufacturer. This section describes how to obtain the equipment serial number.
Method 1: Obtain the Equipment Serial Numberby Using a CommandRun the display elabel slot slot-idcommand to view electronic label information. slot-idspecifies the slot ID of the device. BarCodespecifies the equipment serial number.
display elabel slot 0
/$[System Integration Version]
/$SystemIntegrationVersion=3.0
[Slot_0]
/$[Board Integration Version]
/$BoardIntegrationVersion=3.0
[Main_Board]
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0
[Board Properties]
BoardType=CX22EFGEA
wei Networking Products News and FAQ http://www.huahardware.com/
21 13/02/2015 11:44
-
7/25/2019 Huawei Networking Products News and FAQ
5/21
BarCode=2102351820109C000451
Item=02351820
NOTE:
You can run the display device manufacture-infocommand to check the serial number obtained from the electronic label. Only V200R003 and later versions support this
command.
Method 2: Obtain the Equipment Serial Number Through the Web System
When the web system is enabled on a device, view the equipment serial number through the web system.
EasyOperation web system (supported only in V200R005 and later versions)
Log in to a device through the web system and click Monitoron the toolbar to view device information, including the equipment serial number, as shown in Figure 1.
Figure 1 System Description
Web system classical version
Log in to a device through the web system and click Device Summaryon the toolbar to view board information, including the equipment serial number, as shown in Figure 2.
The following uses information in V200R005 as an example.
Figure 2 Board information
Method 3: Obtain the Equipment Serial Number by Viewing the Serial Number Label
Table 1 Instructions on how to obtain the equipment serial number
Device Model Serial Number Label Location
S2750 The equipment serial number label is attached to the rear side of the device.
NOTE:
The serial number label has a total of 20 characters, for example, 210235383610C3000006. The serial number shown in
the figure is only used as an example. The serial number label location on the rear side of a device varies according to
the device model.
S5700-LI
S5700S-LI
S5700-SI S5700-24TP-SI-AC
S5700-24TP-SI-DC
S5700-48TP-SI-AC
S5700-48TP-SI-DC
S5700-26X-SI-12S-AC
S5700-HI
wei Networking Products News and FAQ http://www.huahardware.com/
21 13/02/2015 11:44
-
7/25/2019 Huawei Networking Products News and FAQ
6/21
-
7/25/2019 Huawei Networking Products News and FAQ
7/21
Table 1 Instructions on how to obtain the equipment serial number
Device Model Serial Number Label Location
S5720-HI
S5720-C-EI
S5720-PC-EI
There is a removable equipment serial number label at the lower left of the rear panel.
More related:
Huawei S5700 Naming Conventions
Huawei S5700 Port Numbering Conventions
Huawei S5700 Interface Card Description
Huawei Quidway s5700 switch configuration
Thread Tags: Huawei Switches, Obtain the Equipment Serial Number, S2750, S5700-24TP-PWR-SI, S5700-24TP-SI-AC, S5700-24TP-SI-DC, S5700-26X-SI-12S-AC,
S5700-28C-EI, S5700-28C-EI-24S, S5700-28C-PWR-EI, S5700-28C-PWR-SI, S5700-28C-SI, S5700-48TP-PWR-SI, S5700-48TP-SI-AC, S5700-48TP-SI-DC,
S5700-52C-EI, S5700-52C-PWR-EI, S5700-52C-PWR-SI, S5700-52C-SI, S5700-EI, S5700-SI, S5710-28C-LI, S5710-28C-PWR-LI, S5710-LI, S5720-P-EI, S5720-X-EI,
S6700
comments
0
Huawei NE40E Routers Overview and Specification
Published by adminon 29th January 2015
Filed Under Huawei NE40E, Huawei Router
The Huawei NE40E series universal service router (USR), a high-end network product, can provide comprehensive services for enterprises, residential as universal edge
device. Based on distributed hardware forwarding and non-blocking switching technologies, the NE40E provides maximum 480G line cards to satisfy the increased demand
for bandwidth. The NE40E series features line-rate forwarding capability, a well designed Quality of Service (QoS) mechanism, strong service-processing capability, and
excellent expansibility and are usually deployed at the edges of Internet Protocol (IP) backbone networks, IP Metropolitan Area Networks (MANs), Internet Data Centers
(IDCs) networks and other large-scale IP networks.
The NE40E series includes the NE40E-X16/X16A, NE40E-X8/X8A, NE40E-X3 to satisfy the requirement of various scales network.
The great advantage of Huawei NE40E series routers
Extremely Large Capacity Line Card
The NE40E can support maximum 480G Line Card, which fulfills with the increased network requirements of customers. The powerful 480G line card can support both
100GE and 10GE port types, which can provide customer a flexible configuration. Excelling by the developed chipset technology and fine design technique, NE40E mustprovide sustainable high bandwidth capacity in the future.
Future-Oriented IPv6-Compatible Solutions
The NE40E supports a variety of IPv6 features including IPv6 leased line, dual stack, tunneling, and translation. The NE40E supports Next Hop Separation to optimize the
IPv6 convergence time, supports larger IPv6 FIB and CGN card of 160G throughput to improve the scalability. All of them help to provide comprehensive solutions based on
the high performance for transition from IPv6 to IPv4. And owing to the variety of technologies and different situations of provider networks, each provider will certainly
select a conservative, reposeful, or aggressive transition technology that is the most suitable for its own network.
All-Round Reliability Solution
The NE40E provides reliability protection at different levels, including the equipment level, network level, and service level. The NE40E can provide a multi-level reliability
solution that completely meets the reliability requirements of different services. The NE40E lays the foundation for enterprise services with a system availability of 99.999%.
Beside, the Huawei NE40E seriesprovides Multi Service Edge (MSE) features to manage and control DHCP/IP over Ethernet (IPoE)/leased line access users. And supports
Ethernet OAM fault management: Ethernet in the First Mile OAM (EFM OAM), conforming to IEEE 802.3ah and Connectivity Fault Management OAM (CFM OAM),
conforming to IEEE 802.1ag.Conforming to ITU-T Y.1731, the NE40E supports performance management to measure the delay, jitter, and packet loss ratio when the
messages are transmitted.
wei Networking Products News and FAQ http://www.huahardware.com/
21 13/02/2015 11:44
-
7/25/2019 Huawei Networking Products News and FAQ
8/21
Huawei NE40E Series Product Specification
More related:
Huawei NE Series Routers Overview
Huawei NetEngine5000E Core Router Chassis
The introduction of NetEngine40E series universal service router
wei Networking Products News and FAQ http://www.huahardware.com/
21 13/02/2015 11:44
-
7/25/2019 Huawei Networking Products News and FAQ
9/21
Thread Tags: Huawei NE40E, Huawei NE40E series, Huawei NE40E Series Product Specification, Huawei NE40E series routers, Huawei NE40E series universal service
router, Huawei router, IPv6, NE40E routers, NE40E-X16, NE40E-X3, NE40E-X8
comments
0
Power Supplies Supported by the Huawei S5700
Published by adminon 23rd January 2015
Filed Under Huawei S5700, Huawei Switch, Networking, Technology
Power Supplies Supported by the Huawei S5700:
Device Series Device Model Power Supply Configuration Supporting PoE Supporting Hot
Swapping of Power
Modules
S5700-LI S5700-28P-LI-AC One built-in power supply, external RPS1800
for power supply backup
S5700-28TP-LI-AC One built-in power supply, external RPS1800
for power supply backup
S5700-28P-LI-DC One built-in power supply, external RPS1800
for power supply backup
S5700-28P-PWR-LI-AC One built-in power supply, external RPS1800
for power supply backup
S5700-28TP-PWR-LI-AC One built-in power supply, external RPS1800
for power supply backup
S5701-28TP-PWR-LI-AC One built-in power supply, external RPS1800
for power supply backup
S5700-52P-LI-AC One built-in power supply, external RPS1800
for power supply backup
S5700-52P-LI-DC One built-in power supply, external RPS1800
for power supply backup
S5700-52P-PWR-LI-AC One built-in power supply, external RPS1800
for power supply backup
S5700-10P-LI-AC One built-in power supply
S5700-10P-PWR-LI-AC One built-in power supply
S5700-28X-LI-AC One built-in power supply, external RPS1800
for power supply backup
S5700-28X-LI-DC One built-in power supply, external RPS1800
for power supply backup
S5700-28X-PWR-LI-AC One built-in power supply, external RPS1800
for power supply backup
S5700-52X-LI-AC One built-in power supply, external RPS1800
for power supply backup
S5700-52X-LI-DC One built-in power supply, external RPS1800
for power supply backup
S5700-52X-PWR-LI-AC One built-in power supply, external RPS1800
for power supply backup
S5700-28X-LI-24S-DC One built-in power supply, external RPS1800
for power supply backup
S5700-28X-LI-24S-AC One built-in power supply, external RPS1800
for power supply backup
S5701-28X-LI-AC One built-in power supply, external RPS1800
for power supply backup
S5701-28X-LI-24S-AC One built-in power supply, external RPS1800
for power supply backup
S5700-52X-LI-48CS-AC One built-in power supply, external RPS1800
for power supply backup
S5700-28P-LI-BAT One built-in power supply
S5700-28P-LI-24S-BAT One built-in power supply
S5700S-LI S5700S-28P-LI-AC One built-in power supply, external RPS1800
for power supply backup
S5700S-52P-LI-AC One built-in power supply, external RPS1800
for power supply backup
S5710-LI S5710-28C-LI-AC 1+1 power supply backup (the backup power
supply is optional)
S5710-28C-PWR-LI 1+1 power supply backup (the backup power
supply is optional)
S5710-52C-LI-AC 1+1 power supply backup (the backup power
supply is optional)
S5710-52C-PWR-LI 1+1 power supply backup (the backup power
supply is optional)
S5700-SI S5700-24TP-SI-AC One built-in power supply
S5700-24TP-SI-DC One built-in power supply
S5700-24TP-PWR-SI 1+1 power supply backup (the backup powersupply is optional)
S5700-28C-SI 1+1 power supply backup (the backup power
supply is optional)
S5700-48TP-SI-AC One built-in power supply
S5700-48TP-SI-DC One built-in power supply
wei Networking Products News and FAQ http://www.huahardware.com/
21 13/02/2015 11:44
-
7/25/2019 Huawei Networking Products News and FAQ
10/21
Device Series Device Model Power Supply Configuration Supporting PoE Supporting Hot
Swapping of Power
Modules
S5700-48TP-PWR-SI 1+1 power supply backup (the backup power
supply is optional)
S5700-52C-SI 1+1 power supply backup (the backup power
supply is optional)
S5700-28C-PWR-SI 1+1 power supply backup (the backup power
supply is optional)
S5700-52C-PWR-SI 1+1 power supply backup (the backup power
supply is optional)
S5700-26X-SI-12S-AC One built-in power supply, external RPS1800for power supply backup
S5700-EI S5700-28C-EI 1+1 power supply backup (the backup power
supply is optional)
S5700-28C-EI-24S 1+1 power supply backup (the backup power
supply is optional)
S5700-28C-PWR-EI 1+1 power supply backup (the backup power
supply is optional)
S5700-52C-EI 1+1 power supply backup (the backup power
supply is optional)
S5700-52C-PWR-EI 1+1 power supply backup (the backup power
supply is optional)
S5710-EI S5710-28C-EI 1+1 power supply backup (the backup power
supply is optional)
S5710-52C-EI 1+1 power supply backup (the backup power
supply is optional)
S5710-28C-PWR-EI-AC 1+1 power supply backup (the backup powersupply is optional)
S5710-52C-PWR-EI-AC 1+1 power supply backup (the backup power
supply is optional)
S5710-52C-PWR-EI 1+1 power supply backup (the backup power
supply is optional)
S5720-EI S5720-36C-EI-AC 1+1 power supply backup (the backup power
supply is optional)
S5720-56C-EI-AC 1+1 power supply backup (the backup power
supply is optional)
S5720-36C-EI-28S-AC 1+1 power supply backup (the backup power
supply is optional)
S5720-56C-EI-48S-AC 1+1 power supply backup (the backup power
supply is optional)
S5720-36C-PWR-EI-AC 1+1 power supply backup (the backup power
supply is optional)
S5720-56C-PWR-EI-AC 1+1 power supply backup (the backup power
supply is optional)
S5720-56C-PWR-EI-AC1 1+1 power supply backup (the backup power
supply is optional)
S5720-36PC-EI-AC 1+1 power supply backup (the backup power
supply is optional)
S5720-56PC-EI-AC 1+1 power supply backup (the backup power
supply is optional)
S5720-32X-EI-AC One built-in power supply, external RPS1800
for power supply backup
S5720-52X-EI-AC One built-in power supply, external RPS1800
for power supply backup
S5720-50X-EI-AC One built-in power supply, external RPS1800
for power supply backup
S5720-32X-EI-24S-AC One built-in power supply, external RPS1800
for power supply backup
S5720-50X-EI-46S-AC One built-in power supply, external RPS1800
for power supply backup
S5720-32P-EI-AC One built-in power supply, external RPS1800
for power supply backup
S5720-32P-EI-AC One built-in power supply, external RPS1800
for power supply backup
S5700-HI S5700-28C-HI 1+1 power supply backup (the backup power
supply is optional)
S5700-28C-HI-24S 1+1 power supply backup (the backup power
supply is optional)
S5710-HI S5710-108C-PWR-HI 1+1 power supply backup (the backup power
supply is optional)
S5720-HI S5720-56C-HI-AC 1+1 power supply backup (the backup power
supply is optional)
S5720-56C-PWR-HI-AC 1+1 power supply backup (the backup power
supply is optional)
S5720-32C-HI-24S-AC 1+1 power supply backup (the backup power
supply is optional)
wei Networking Products News and FAQ http://www.huahardware.com/
de 21 13/02/2015 11:44
-
7/25/2019 Huawei Networking Products News and FAQ
11/21
Table 2 lists hot swappable power modules supported by the S5700.
Table 2 Hot swappable power modules supported by the S5700
Device
Series
Device Model 150 W
AC
150 W
DC
170 W
AC
170 W
DC
350 W AC 350 W DC 250 W AC
PoE
500 W AC
PoE
580 W AC PoE 600W AC 1150 W AC PoE
S5710-LI S5710-28C-LI-AC
S5710-28C-PWR-LI
S5710-52C-LI-AC
S5710-52C-PWR-LI
S5700-SI S5700-24TP-PWR-SI
S5700-28C-SI
S5700-48TP-PWR-SI
S5700-52C-SI
S5700-28C-PWR-SI
S5700-52C-PWR-SI
S5700-EI S5700-28C-EI
S5700-28C-EI-24S
S5700-28C-PWR-EI
S5700-52C-EI
S5700-52C-PWR-EI
S5710-EI S5710-28C-EI
S5710-52C-EI
S5710-28C-
PWR-EI-AC
S5710-52C-
PWR-EI-AC
S5710-52C-PWR-EI S5700-HI S5700-28C-HI
S5700-28C-HI-24S
S5710-HI S5710-108C-PWR-HI
S5720-HI S5720-56C-HI-AC
S5720-56C-
PWR-HI-AC
S5720-32C-
HI-24S-AC
NOTE:
On the non-PoE models of S5700-SI, S5700-EI, and S5710-EI and the S5700-HI series, the AC and DC power supplies can be installed on the same device.
The S5710-HI supports both PoE and 350 W AC non-PoE power modules.
Thread Tags: 5720-EI, huawei power, huawei power supplies, Huawei S5700, Huawei S5700 Power Supplies, huawei s5700 Power Supply Configuration, s5700 poe, s5700
switch, S5700-10P-LI-AC, S5700-28P-LI-AC, S5700-28P-LI-DC, S5700-28P-PWR-LI-AC, S5700-28TP-LI-AC, S5700-28TP-PWR-LI-AC, S5700-28X-LI-DC, S5700-52P-
LI-AC, S5700-52P-LI-DC, S5700-52P-PWR-LI-AC, S5700-52X-PWR-LI-AC, S5700-EI, S5700-HI, S5700-LI, S5700-SI, S5700S-LI, S5701-28TP-PWR-LI-AC, S5710-EI,
S5710-HI, S5720-HI
comments
0
How to Log In to the Device Through a Console Port on Huawei Switches
Published by adminon 14th January 2015
Filed Under Huawei S5700, Huawei Switch, Technology
Networking RequirementsWhen you cannot remotely log in to the Huawei switches, you can perform local login through a console port. If you log in to the device through a console port, only
password authentication is required. To improve security, use AAA on the console user interface. We use the Huawei S9303, S5700-52C-EIfor the test.
Figure 1 Networking diagram of user login through a console port
Configuration Roadmap
The configuration roadmap is as follows:
Use the terminal simulation software to log in to the device through a console port.1.
Configure the authentication mode of the console user interface.2.
NOTE:
You can use the built-in terminal emulation software (such as the HyperTerminal of Windows 2000/XP) on the PC. If no built-in terminal emulation software is available, use
the third-party terminal emulation software. For details, see the software user guide or online help.
wei Networking Products News and FAQ http://www.huahardware.com/
e 21 13/02/2015 11:44
-
7/25/2019 Huawei Networking Products News and FAQ
12/21
Procedure
Use the terminal simulation software to log in to the device through a console port.
Insert the DB9 connector of the console cable delivered with the product to the 9-pin serial port on the PC, and insert the RJ45 connector to the console port of the
device, as shown in Figure 2.
1.
1.
Figure 2 Connecting to the device through the console port
Start the terminal simulation software on the PC. Establish a connection, and set the connected port and communication parameters.1.
NOTE:
A PC may have multiple connection ports; therefore, the port connected through the console cable is selected in this example. Generally, COM1 is selected.
If the serial port communication parameters of the device are modified, modify the communication parameters on the PC accordingly (ensure that the parameter values are the
same) and re-establish the connection.
Press Enteruntil the system prompts you to enter the password. (The system will prompt you to enter the user name and password in AAA authentication. Thefollowing information is only for reference.)
1.
Login authentication2.
Password:
You can run commands to configure the device. Enter a question mark (?) whenever you need help.
Configure the authentication mode of the console user interface.1.
system-view
[HUAWEI] user-interface console 0
[HUAWEI-ui-console0]authentication-mode aaa
[HUAWEI-ui-console0]user privilege level 15
[HUAWEI-ui-console0]quit
[HUAWEI] aaa
[HUAWEI-aaa] local-user admin1234 password irreversible-cipher Helloworld@6789
[HUAWEI-aaa] local-user admin1234 privilege level 3
[HUAWEI-aaa] local-user admin1234 service-type terminal
After the preceding operations, you can re-log in to the device on the console user interface only by entering the user name admin1234and password Helloworld@6789.
Configuration Files
#
aaa
local-user admin1234 password irreversible-cipher %@%@wDpSLO3=i>ZQ|%M9zc)@Qf`[x@76HSnpJ!+G3NCikV5Qfc@%@%@
local-user admin1234 privilege level 3
local-user admin1234 service-type terminal
#
user-interface con 0
authentication-mode aaa
user privilege level 15
#
return
More related:
wei Networking Products News and FAQ http://www.huahardware.com/
de 21 13/02/2015 11:44
-
7/25/2019 Huawei Networking Products News and FAQ
13/21
How to do Speed Limits over Huawei Switch?
Powerful function Huawei Switch S5700-24TP-SI-AC
What is the Working Temperature for the Huawei Switches?
How to Configure the MAC Address Table for Huawei Switch?
Thread Tags: Console Port, huawei device, Huawei S5700, huawei s9300, Huawei S9303, Huawei Switch, Huawei Switches, huawei switches configuration, S5700-52C-EI,
switch huawei
comments
0
Differences Between GPON Service Boards
Published by adminon 7th January 2015
Filed Under Huawei MA5600, Huawei MA5600T, Huawei MA5603T, Networking
Q: Whats the differences between GPON service boards?
A: The below table lists the major differences between GPON service boards.
Board GPON Type Port Quantity Optical Module Maximum Split RatioONU based shaping
H802GPBD 1G-GPON 8 SFP (Class B+ and Class C+)1:128 No
H805GPBD/H806GPBD 1G-GPON 8 SFP (Class B+ and Class C+)1:128 Yes
H802GPFD/H803GPFD
/H805GPFD1G-GPON 16 SFP (Class B+ and Class C+)1:128 Yes
H806GPBH/H807GPBH 1G-GPON 8 SFP (Class B+ and Class C+)1:128 Yes
H802XGBC 10G-GPON 4 XFP 1:128 Yes
Now, Huanetwork labhave GPBD and Huawei OLT ready for test, you may contact our sales person for remotely login test.
About Huanetwork lab:
As a leading Huawei products and solution provider, Huanetworkis serving many customers worldwide, products description and configuration,
but it is not enough, people believing practicing and testing are more helpful.After having got profound understanding of our customers requirements,
Huanetwork invested and built the industry famous Huawei Products Lab, Huanetwork Lab, to offer remote test and practice service for worldwide customers before purchase.
Now in our Huanetwork Lab, we have below products ready for test:
Huawei OLT Optical Line Terminal MA5600T Series
Huawei MDU Multiple Dwelling Unit MA5620
Huawei ONT Optical Network Terminal HG8245A, HG8245, HG8010H Huawei OSN500
Huawei DSLAM MA5616
Huawei AC-DC Power Converter System EPS30-4815AF
Huawei Optical Splitter 1:32
Huawei X700 Series GE Switch S5700-28C-EI with 10G Uplink Module
Huawei X700 Series Access Layer Switch S2700-9TP-EI-AC
Huawei X300 Series Layer 3 Full Optical DC Switch S3328TP-EI-24S-DC
Huawei SFP, SFP+, XFP Module, GPON B+ C+ Module
Huawei Routers AR1200 Series
Huawei U2000 Network Management System
Huawei eSight Network Management System
Cisco WS-C3560X-24P-L Switch (for compatible test purpose)
Now with Huanetwork Lab, customers can do below test:
FTTx System Test
ADSL2+ System Test
Campus LAN/WAN Test
Optical Transceiver Test
Network Management Test
Compatible Test
wei Networking Products News and FAQ http://www.huahardware.com/
de 21 13/02/2015 11:44
-
7/25/2019 Huawei Networking Products News and FAQ
14/21
-
7/25/2019 Huawei Networking Products News and FAQ
15/21
[HUAWEI-GigabitEthernet0/0/1]quit
[HUAWEI] interface gigabitethernet 0/0/2
[HUAWEI-GigabitEthernet0/0/2]port link-type access
[HUAWEI-GigabitEthernet0/0/2]port default vlan 3
[HUAWEI-GigabitEthernet0/0/2]quit
Set dynamic ARP parameters for the VLANIF interface.2.
# Create VLANIF2.
[HUAWEI] interface vlanif 2
# Configure an IP address for VLANIF2.
[HUAWEI-Vlanif2] ip address 2.2.2.2 255.255.255.0
# Set the aging time of ARP entries to 60s.
[HUAWEI-Vlanif2] arp expire-time 60
# Set the number of probes to ARP entries to 2.
[HUAWEI-Vlanif2] arp detect-times 2
[HUAWEI-Vlanif2] quit
# Create VLANIF3.
[HUAWEI] interface vlanif 3
# Configure an IP address for VLANIF3.
[HUAWEI-Vlanif3] ip address 10.2.2.2 255.255.255.0
[HUAWEI-Vlanif3] quit
Configure a static ARP entry.3.
# Configure a static ARP entry with IP address 10.2.2.3, MAC address 00e0-fc01-0000, VLAN ID 3, and outbound interface GE0/0/2.
[HUAWEI] arp static 10.2.2.3 00e0-fc01-0000 vid 3 interface gigabitethernet 0/0/2
[HUAWEI] quit
Verify the configuration.4.
# Run the display current-configurationcommand to check the aging time, number of probes, and ARP mapping entries.
display current-configuration | include arp
arp detect-times 2
arp expire-time 60
arp static 10.2.2.3 00e0-fc01-0000 vid 3 interface GigabitEthernet0/0/2
Configuration Files
Configuration file of the switch
#
sysname HUAWEI
#
vlan batch 2 to 3
#
interface Vlanif2
arp detect-times 2
arp expire-time 60
ip address 2.2.2.2 255.255.255.0
#
wei Networking Products News and FAQ http://www.huahardware.com/
de 21 13/02/2015 11:44
-
7/25/2019 Huawei Networking Products News and FAQ
16/21
interface Vlanif3
ip address 10.2.2.2 255.255.255.0
#
interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 2
#
interface GigabitEthernet0/0/2
port link-type access
port default vlan 3
#
arp static 10.2.2.3 00e0-fc01-0000 vid 3 interface GigabitEthernet0/0/2
#
Return
The more information about technical support you can consult with our engineer Bill, and his e-mail address is as below:
More related:
How to Configure GVRP for Huawei Switches?
How to Configure PoE for Huawei PoE Switches?
How to Configure the MAC Address Table for Huawei Switch?
How to Configure LLDP on Huawei Switch to Provide VoIP Access?
How to Configure VLAN ID-based 1:1 VLAN Mapping for Huawei Switch?
Thread Tags: ARP configuration, Configure ARP for Huawei Switches, Huawei LAN Switch, huawei s2700, Huawei S5700, Huawei Switch, Huawei switch ARP
configuration, Huawei Switches
comments
0
Christmas promotion Big Saving on Huawei Products
Published by adminon 19th December 2014
Filed Under Huawei MA5600, Huawei Switch, News
Merry Christmas!
Huanetwork will extend a good offer to all customer a chance to save up $50 ~ $105 on per following Huawei product during this Christmas, this Christmas promotion
expires in 26th, Dec. The more you bring, the more you save. But please hurry, this offer is in very limited time, come in now to see our fantastic selections.
Selection 1: Huawei OLT MA5680T
Usually we sale MA5680T with typical configuration with B+ SFP Module at 2140USD. But during the promotion, only 2040USD for typical configuration with C+ SFP
Module, additional free offer one unit C+ SFP Module or one unit 1X8 Cassette Type Splitter.
OLT MA5680T Offer Special promotion offer
include 1*MA5680T Chassis,
2*SCUN Main Control Board,
1*GICF 2 GE Optical Ports Uplink Board,
2*PRTE DC Power Board,
1*GPBD 8 GPON Port Board. (with B+ SFP
Module)
Price: $2,140
include 1*MA5680T Chassis,
2*SCUN Main Control Board,
1*GICF 2 GE Optical Ports Uplink Board,
2*PRTE DC Power Board,
1*GPBD 8 GPON Port Board. (with C+ SFP
Module)
(Free Offer: 1 unit C+ SFP Module or
1 unit Cassette Type Splitter 1X8 )
wei Networking Products News and FAQ http://www.huahardware.com/
de 21 13/02/2015 11:44
-
7/25/2019 Huawei Networking Products News and FAQ
17/21
Promotion Price: $2,040
Selection 2: Huawei MDU MA5626-8, apply for FTTO scenario
MDU MA5626-8 MDU Position on the Network
8FE, AC, GPON
Price: $125 Promotion price: $99
Selection 3: Huawei switch S5700-28C-EI-24SVS Cisco WS-C3750X-24S-E (Similar Function)
VS
S5700-28C-EI-24S WS-C3750X-24S-E
Huanetwork Price: US$1,600 Market Price: US$15,000 GPL:US$30,000
20 100/1000Base-X and 4 GE Combo, Dual Slots of power, Single Slot of
Flexible Card, Without Flexible Card and Power Module
24 100/1000Base-X, Dual Slots of power, Single Slot of Flexible
Card, Without Flexible Card. IP Services Feature
If you are interested in the above items, hurry to contact us soon. The time is limited, and this offer cannot last forever. .
Merry Christmas, fully enjoy a happy time with your family.
Contact Info:
Website:http://www.huanetwork.com
Telephone:+852-30501940(Hong Kong)
Email:[email protected] (Sales Inquiries)
Thread Tags: Big Saving on Huawei Products, Christmas promotion, Huawei MDU MA5626-8, Huawei OLT MA5680T, Huawei Products, Huawei Switch, MA5680T, MDU
MA5626-8, S5700-28C-EI-24S, WS-C3750X-24S-E
comments
0
Huawei S5700-52C-EI Review
Published by adminon 4th December 2014
Filed Under Huawei S5700, Huawei Switch, Technology
Huawei S5700 series gigabit enterprise switchesare next-generation energy-saving switches developed by Huawei to meet the demand for high-bandwidth access andEthernet multi-service aggregation. The S5700 can be used in various enterprise network scenarios. For example, it can function as an access or aggregation switch on a
campus network, a gigabit access switch in an Internet data center (IDC), or a desktop switch to provide 1000 Mbit/s access for terminals.
Different from the Huawei S5700 LI/ SI/ HI, the S5700-EI supports VRRP, and can set up VRRP groups with other Layer 3 switches. VRRP provides redundant routes to
ensure stable and reliable communication. Multiple equal-cost routes to an uplink device can be configured on the S5700 to provide route redundancy. When an active route is
unreachable, traffic is switched to a backup route.
wei Networking Products News and FAQ http://www.huahardware.com/
de 21 13/02/2015 11:44
-
7/25/2019 Huawei Networking Products News and FAQ
18/21
-
7/25/2019 Huawei Networking Products News and FAQ
19/21
DDR memory 256 MB
Flash memory 32 MB
Dimensions (W x D x H) 442.0 mm x 420.0 mm x 43.6 mm
Stack port Two stack ports available on each stack card
Maximum stack
bandwidth (bidirectional)48 Gbit/s
RPS Not supported
PoE The PWR series support PoE.
Huanetwork keeps many Huawei S5700 series switches in stock and can ship to worldwide customers. S5700-52C-EI is Huanetwork regular stock item and Huanetwork Lab
has Huawei S5700 Switch ready for customer remote login test. If you have such requirement please contact your sales person, if you are new customer, please feel free to
contact [email protected]. Our HCIE headed technical team can provide network design, products installation and configuration, trouble shooting etc.
More related topics
S5700-28P-PWR-LI-AC FAQ
What is Huawei New Product SmartAX MA5673?
What is Huawei New Product SmartAX MA5671?
The difference between the Huawei S2700SI and S2700EI
Thread Tags: Huawei S5700 series gigabit enterprise switches, Huawei S5700-52C-EI, Huawei S5700-52C-EI Specification, S5700-52C-EI, S5700-52C-EI Datasheet,
S5700-52C-EI Overview, S5700-52C-EI Review, S5700-52C-EI Specification
comments
0
What is Huawei New Product SmartAX MA5673?
Published by adminon 28th November 2014
Filed Under Huawei MA5600, Technology
The Huawei GPON equipmentSmartAX MA5670 series, including the SmartAX MA5671, c, SmartAX MA5675, and SmartAX MA5675M, are carrier-class ONUs launched
by Huawei dedicated for small- and medium-sized enterprise (SME) access. The devices provide GE, POTS, E1, and Wi-Fi ports and can be used in various broadband access
scenarios, such as small office and home office (SOHO), HSI, video monitoring, intelligent residential areas, and small-sized enterprise access. The SmartAX MA5670 series
can be installed on desktops, in corridors, and in outdoor cabinets, support environment adaptability, and feature easy installation and maintenance.
Specification
Network-side Port: 1*GPON
User-side Port: 4GE+4POTS+4E1
Dimensions (W x D x H): 250 mm x 180 mm x 43.6 mm
Weight: 1.3 kg
Power:
0C to +40C AC power supply: 100 V AC to 240 V AC, 50 Hz to 60 Hz
DC power supply: 12 V power backup
Operating environment: 0C to +40C
Power consumption:
Static power consumption: 8 W
Typical power consumption: 12 W
Maximum power consumption: 15 W
Features
GPON
Class B and Class B+ optical modules
Authentication by serial number (SN), password, SN+password, or LOID
Type B protection
Broadband
Any port any service
IPv6 Protocol
wei Networking Products News and FAQ http://www.huahardware.com/
de 21 13/02/2015 11:44
-
7/25/2019 Huawei Networking Products News and FAQ
20/21
Support 4 priority queues per user port
Voice
Session Initiation Protocol (SIP) and H.248
Separation of media and signaling streams
RFC2198
Adjustable port impedance
Multicast
Internet Group Management Protocol version 2 (IGMPv2) and IGMPv3 snooping
Dynamic controllable multicast
IGMP proxy
Security
Filtering of source MAC address, IP address, and uniform resource locator (URL)
Denial of service (DoS) anti-attack
Access control rule configuration for the MA5670 series
Maintenance
Local management through the web page
Remote management of GPON terminals through optical network terminal management and control interface (OMCI)
Optical power monitoring
Loop line and call emulation tests performed through POTS ports
GPON ring network detection
Ethernet
VLAN filtering and transparent transmission
VLAN tag adding for packetsVLAN translation and priority switching
IPv6
Coexistence of IPv4 and IPv6
IPv6 routing
DHCPv6
DNSv6
E1 access
Native time division multiplexing (TDM)
Characteristics
The SmartAX MA567X series products provide users with access to multipleservices, such as GE-to-desk, POTS voice, fax, wireless office, and video surveillance
The SmartAX MA567X series products support the configuration for anti-DoS attack, filtering based on MAC addresses, IP addresses, or uniform resource locator
(URL) addresses, and firewall and ONU access control rules, ensuring secure and reliable application
The SmartAX MA567X series products support TR-069/ONU Management and Control Interface (OMCI)/OAM management modes. In this manner, terminal services
can be managed without deployment of additional IP networks.
The SmartAX MA567X series products support ONU service issuance in batches and network adjustment. After being powered on, an MA567X series device is
automatically upgraded.
The SmartAX MA567X series products support remote fault location through the NMS by reporting alarms and remote loopback diagnosis results. Therefore, O&M
personnel can locate faults
Without visiting sites, which reduces O&M costs.
Deployment Scenarios
wei Networking Products News and FAQ http://www.huahardware.com/
de 21 13/02/2015 11:44
-
7/25/2019 Huawei Networking Products News and FAQ
21/21