HTC High Technology Control
Transcript of HTC High Technology Control
High Technology ControlLeaders in Electrical Power, Automation and Control
HTC High Technology Control’s mission is to provide solutions to the Power, Automation & Control Industry by aiming
to deliver the highest standards of technical customer service and support
Our vision is to be the identified as the benchmark of quality and service in all businesses we partake
www.hightech.com.au
Sydney: 02 9771 4088 Melbourne: 03 8376 6254 Brisbane: 07 3102 2709
Head Office:
8 Stuart Street, Padstow, NSW 2211 Australia
High Technology Control is an Australian company established since 1985 harbouring many years of
experience within the automation industry. As an Authorised Value Provider for ABB, a worldwide leader
in the power, automation and control industry, HTC can offer products, services and support of the
highest quality. As the sole agent in Australia for Fagor Automation, BEI encoders and Glentek Servo
Systems our engineers have the expertise to offer fast service without compromising quality. Through
these network alliances HTC has access to a wide range of low voltage products and is able to provide
high quality product at competitive prices within the market.
HTC aims to be the most trusted provider within the industry by developing and maintaining customer
relationships. This commitment has enhanced the company’s profile allowing for the expansion of the
company interstate and for continual long term growth
“Offering customers the latest leading products at competitive prices”
Company Overview
HTC High Technology Control
HMI
CNC Retrofits
AC500 PLC
FLOW METERS
MOTORS
AC DRIVES
LOW VOLTAGE PRODUCTS
ACTIVE FILTERS
DC Drives
POWER FACTOR CORRECTION
ACH550
ACS355
ACS880
With the ACS880 single drives you simplify your world
and open all possibilities, compatible with all processes
and systems.
Product Ranges
AC Drives
• ABB micro drives
• ABB machinery drives
• ABB water drives
• ABB HVAC drives
DC Drives
ABB Standard drives DCS550
ABB variable speed drives portfolio offers
customers the flexibility and reliability to control
their systems with minimal downtime. Backed
with global support and life cycle services there is
a drive for any application
The HVAC system aims to balance the quality of air
with the need to achieve optimum energy
efficiency. The VSD’s operate at low speeds
allowing for less energy consumption which result
in reduced operating costs.
If you are a system integrator, original equipment
manufacturer or panel builder, these drives are designed
for fast installation and commissioning whilst being highly
compact and cost effective.
Variable Speed Drives Low voltage AC and DC drives
High Technology Control has the expertise and
experience to offer full support for any of its
product range. Our team can offer advice on
selection right through to commissioning and
servicing options.
Commissioning
Depending on the scope of the project and the
customers’ requirements we can offer onsite
commissioning or over the phone assistance. Our
flexibility allows us to tailor our services to suit
your needs Poor power quality could be straining your network,
affecting your reliability and efficiency and costing you
money. We can offer a full site power analysis to give you
an understanding of your power usage and help diagnose
any areas with low power factor or in danger of being
affected by harmonics
Preventative Maintenance
To ensure optimum operation and longevity of
your equipment often preventative maintenance or
periodical servicing is recommended. This is an
option available with Variable Speed drives and
Power factor correction equipment and can be
accompanied with extended warranties for peace
of mind.
Power Quality Analysis
Commissioning, Maintenance & Power Quality Analysis
Improving Power quality can have many advantages for
your site and offer significant paybacks. ABB range of
power factor correction products are the perfect
solution for industrial and commercial applications.
ABB ABBACUS MECB is a powerful and compact range of
automatic capacitor banks which provides the ideal
power factor correction solution for industrial and
commercial applications
ABBACUS MECB is easy to install, operate and service
whilst ensuring exceptional reliability, efficiency and
safety.
Power Quality
Metal Enclosed Capacitor Banks
The key feature of ABBACUS MECB is the modular
design and versatility for various applications and
environments. The ABBACUS range includes a wall
mounted, indoor and outdoor series.
Powerful and compact
ABB world renowned CLMD capacitors, with a specially
designed ventilation system, allow ABB capacitor banks to
reach a maximum reactive power within a minimum
volume.
ABB capacitor banks include a 1P31 and IP52 for indoor
installation and IP54 for outdoor use.
Power Factor Correction
Power Quality
Active Filters
ABB’s Active filters are the ideal solution to mitigate
power quality problems caused by harmonics and load
unbalance. These sources of poor power quality can
affect the reliability of your equipment; result in
financial loss and/or safety concerns.
PQFI-PQFM-PQFS Active filters are the ideal solution for industrial
applications using high power where three phase
harmonic loads need to be filtered. Filters are available
in different forms, dimensions and ratings.
ABB PQF active filters are designed with the
customer requirements in mind
Works with standard class Current Transformers
(CT's)
Modular non-over loadable technology which can
be upgraded in the future
User friendly backlit GUI interface with network
monitoring capabilities and extensive I/O
possibilities
Automatic thermal de-rating function allowing to
run automatically in de-rated mode when switch
room temperatures become too high - no risk of
abrupt system tripping
Compact solution usable in both new and
retrofit applications
Power Products
ABB is a global leader in the power industry and
boasts some of the world’s best power products.
From Transformers to cable accessories and much
more in between.
ABB’s Kabledon have utilised their expertise in electrical connections in power cable systems to offer a simple
and safe solution for the reliable transfer and distribution of electricity.
Cable Terminations
Cable Connectors
Parallel Connectors
Surge Arrestors
ABB’s range of transformers can be used to step
down voltages in many applications including
customised solutions for all industries.
Transformers
Cable Accessories
ABB is a global leader in the power industry and
boasts some of the world’s best power products.
From Transformers to power protection products
and much more in between.
Power Protection Products
ABB’s range of power protection products can be used to eliminate power failures and address poor voltage condi-
tions to ensure a clean and reliable electricity supply for all applications.
Active Voltage Conditioners
n Regulate the voltage by correcting sags,
surges and voltage imbalance within a few
milliseconds.
Uninterruptable Power Supplies
n Eliminate Power outages and disturbances to
ensureyour system rides through any incidents.
ABB offers a large range of low and medium voltage
relays, circuit breakers of quality and reliability.
Miniature circuit breakers
MCB
RCD
RCBO
Air circuit breakers
Air circuit breakers are market leading breakers and
can be used for various applications.
Switch disconnectors
Switch fuses
Change-over and transfer
switches
Enclosed switches
Cam switches
Relays ABB’s electronic products and relays portfolio offers a
wide range of solutions to provide protection, control
and measurement for electrical installations
Moulded-case circuit-breakers
ABB moulded case circuit breakers are the much
awarded Tmax and XT series. Tmax and XT are
characterised by an extremely high level of
performance with limited overall dimensions,
installation simplicity and an increasingly greater
guarantee of safety for the operator through
reinforced insulation.
ABB’s range of low voltage switches offer a compact
solution for isolation and protection. With ratings
between 16A and 3150A and a full range of
accessories you have a complete solution for all
your requirements.
Breakers, Switches and Relays
Motor control and Protection
ABB range of contactors and motor protection
devices are equipped to meet today’s demanding
applications. Utilising the latest AF technology
offering electronically controlled coils and a full
range of accessories we can offer a complete
solution.
The AF contactor range is reliable, compact and
has only four coils covering the entire voltage
range. Using ABB’s AC/DC technology the
contactors allow more functionality whilst
needing less space and stock
Low energy consumption
Wide voltage range AC / DC
Voltage sag and dip immunity
Built-in surge suppressor
ABB's Soft starter portfolio offers three ranges
covering up to 1800A to provide integrated motor
starting and monitoring functions for the most
demanding industrial situation.
Soft Starters
Several state-of-the-art design features make it is
possible to start and stop motors smoothly while
keeping mechanical and electrical stresses to a
minimum. The ABB portfolio consists of three ranges,
PSR - The compact range
PSE - The efficient range
PSTX – The advanced range
Motors
ABB offers a wide range of low voltage AC motors with an
emphasis on reliability and efficiency. As one of the world’s
leading motor manufacturers the range covers motors to
suit all applications.
Cast iron frame 0.25 kilowatt (kW) to 1 megawatt (MW) IEC71-450 frame
Aluminium frame 0.75 to 90 kW IEC71-280 frame
SynRM Synchronous Reluctance Motor and Drive Package
High output SynRM motor and drivepackages from
17 to 350 kW for pump and fan applications.
As a member of the ABB group Baldor is a leader in
electric motors, motion control products and
mechanical power transmission.
BEI Encoders
BEI Sensors provides an extensive range of products
from standard off-the-shelf to completely customized
solutions for any challenging application • Incremental Optical Rotary Encoders
• Absolute Optical Rotary Encoders
• Draw Wire Solutions
• Electronic Modules
• Products for all industries including
• Aeorspace & Defence
• Material Handling
• Metal Processing
• Motors and Drives
• Oil & Gas
Operator panels Touch screen or keypad graphical displays are available
from 4.3” up to 15”. The control panel comes standard
with USB ports, SD Card and Ethernet connection.
AC500-eCo A cost effective yet extremely powerful and scalable
solution for a small plc. Possibilities are endless.
Automation Products
Operator panels and PLC families
ABB boasts an extremely scalable plc offering a
comprehensive range of CPU’s and I/O modules. The
portfolio of touch screens are robust and offer a
user friendly configuration software with drivers for
most PLC platforms.
S500 I/O modules Digital and analogue modules are available in various
configurations to suit your application and budget. I/o
modules are interchangeable with all PLC ranges. The
solution can also accommodate most standard
communication protocols and/or remote expansion
options.
Programming package PS501 control builder Control Builder conforms to the IEC61131-3 CoDeSys
standard, offering all 5 programming languages,
extensive function block libraries, a powerful embedded
simulation/visualisation feature and integrated web
server capability. It also supports a number of languages (e.g. including
French, German, Russian and Spanish).
All measurement products offer accurate, reliable and precise
data acquisition.
Measurement Products
ABB flowmeter products are designed to make
measurement easy. With an extensive portfolio of
products there is a solution for almost all industries and
applications
ABB’s flow portfolio includes: Electromagnetic flowmeters
Vortex and swirl flowmeters
Differential pressure flowmeters
Variable area flowmeters
Coriolis mass flowmeters
Thermal mass flowmeters
- Level measurement - Pressure measurement - Temperature measurement - Analytical instrumentation - Recording and control measurement
CNC RETROFIT
If your machinery needs updating then a CNC
retrofit is the solution for you. Our team of
engineers bring projects from the concept stage to a
fully functional machine of the highest quality
offering an economical solution to increase
production.
CNC Retrofitting works for most types of machine tools High Technology Control provides retrofits for most
types of machine tools, including machining centres,
lathes, punch presses, profilers, borers and drilling
machines. This means that no matter what type of
equipment your machining business requires we can
provide a CNC retrofit.
New machines can be CNC Retrofitted as well
As well as retrofitting systems to existing machine tools,
new machines can have CNC systems fitted to them. The
combination of our expertise and Fagor’s advanced CNC
technology means that we can install a cost-effective
retrofit on your machinery that will help you to maximise
productivity.
High Technology Control offers a range of engineering
solutions, from a Fagor Automation CNC retrofit of your
existing technology to a whole new design. We can
maximise your production in the most economical way
to suit your needs.
We are one of the leading companies in Australia when it
comes to Electrical Control and the Automation of
machinery.
High Technology Control stocks a range of Fagor’s CNC
products to meet the demands of high grade machining
and offers computer numerical control retrofits to keep
your machinery moving.
If your production schedules are slipping due to excessive
downtime or poor machinery performance then it may be
time for a CNC retrofit. This is an alternative to replacing
your existing machine tool without huge capital
expenditure.
CNC Repairs & Maintenance We are available to service your equipment at very short
notice and, because we have the most experienced CNC
repair engineers in the industry, we will be able to repair
your equipment in the absolute minimum time.
Our fully equipped workshop with the latest test
equipment and fully trained technicians is ready to
repair your electronic equipment.
Why Retrofit? To maximise machine tool performance at a cost
saving of up to 75% of a new machine
To reduce maintenance costs
To optimize machine life and realise return on
investment in as little as 12 months.
To increase accuracy and reliability
To improve programming efficiencies
When should you retrofit your machine? When downtime of your machine exceeds 20%
When productivity & delivery problems begin to
reduce your competitive advantage
When budgetary constraints prevent the purchase
of a new machine.
CNC RETROFIT
Visit our website to see some pictures of our latest CNC retrofitting projects.
The Picture Gallery will give you an overview of the various types of machines
that have been retrofitted by High Technology Control
High Technology ControlLeaders in Electrical Power, Automation and Control
HTC High Technology Control’s mission is to provide solutions to the Power, Automation & Control Industry by aiming
to deliver the highest standards of technical customer service and support
Our vision is to be the identified as the benchmark of quality and service in all businesses we partake
www.hightech.com.au
Sydney: 02 9771 4088 Melbourne: 03 8376 6254 Brisbane: 07 3102 2709
Head Office:
8 Stuart Street, Padstow, NSW 2211 Australia