HT18 v3.0 0120 - BestPack€¦ · 1.8 MIL (45 MICRON)* Total Thickness 1.1 MIL (28 MICRON)* Film...

1
1.8 MIL (45 MICRON) * Total Thickness 1.1 MIL (28 MICRON) * Film Thickness 0.7 MIL (17 MICRON) * Adhesive Thickness 20 LBS/IN WIDTH ** Tensile Strength 42 OZ/INCH WIDTH *** Peel Adhesion 110% ** Elongation % At Break Test Methods: * ASTM D-3652; ** ASTM D-3759; *** ASTM D-3330 HT18 1.8 MIL (45 MICRON) TOTAL TAPE THICKNESS 28 MICRON CAST BOPP LOW ELONGATION FILM HOT MELT ADHESIVE HT18 is a general purpose grade hot melt carton sealing tape perfect for light to heavy duty sealing applications. HIGH SHEAR GREAT INITIAL TACK CONSISTENT & EASY RELEASE Values obtained from tests do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. BestPack recommends the user to determine whether the product is fit for a particular purpose and is suitable for the user's method of application. SERVICE TEMPERATURE Minimum Temp.: 30°F Maximum Temp.: 140°F USAGE & STORAGE TEMPERATURE IDEAL STORAGE TEMPERATURE Minimum Temp.: 32°F Maximum Temp.: 104°F Ideal Storage Temp.: 77°F +/- 5°F Ideal Storage Humidity: 55% +/- 5% STANDARD FEATURES 28 micron cast biaxially oriented polypropylene (BOPP) low elongation film 17 micron water-based Rohm & Hass acrylic adhesive Specially formulated 110% elongation low stretch cast film increasing Machine Length Rol performance. • • • • AVAILABLE LENGTHS 1372m & 1500m AVAILABLE COLORS AVAILABLE WIDTHS Clear 100m 50m 150m 914m 72mm 48mm 96mm 144mm 288mm RoHS Compliant Tape manufacture in ISO 9001 & 14001 Facilities • • Meets FDA food requirements for indirect food contact. • Available in Hand & Machine Length Rolls • VERSION 3.0_0120 WWW.BESTPACK.COM © 2020 BestPack Packaging Systems. All rights reserved. This document is BestPack Public Information. QUALITY • INNOVATION • COMMUNITY

Transcript of HT18 v3.0 0120 - BestPack€¦ · 1.8 MIL (45 MICRON)* Total Thickness 1.1 MIL (28 MICRON)* Film...

  • 1.8 MIL (45 MICRON)*Total Thickness

    1.1 MIL (28 MICRON)*Film Thickness

    0.7 MIL (17 MICRON)*Adhesive Thickness

    20 LBS/IN WIDTH**Tensile Strength

    42 OZ/INCH WIDTH***Peel Adhesion

    110%**Elongation % At Break

    Test Methods: * ASTM D-3652; ** ASTM D-3759; *** ASTM D-3330

    HT181.8 MIL (45 MICRON) TOTAL TAPE THICKNESS28 MICRON CAST BOPP LOW ELONGATION FILMHOT MELT ADHESIVEHT18 is a general purpose grade hot melt carton sealingtape perfect for light to heavy duty sealing applications.

    HIGH SHEAR GREAT INITIAL TACK CONSISTENT & EASY RELEASE

    Values obtained from tests do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages.BestPack recommends the user to determine whether the product is fit for a particular purpose and is suitable for the user's method of application.

    SERVICETEMPERATURE

    Minimum Temp.: 30°FMaximum Temp.: 140°F

    USAGE & STORAGETEMPERATURE

    IDEAL STORAGETEMPERATURE

    Minimum Temp.: 32°FMaximum Temp.: 104°F

    Ideal Storage Temp.: 77°F +/- 5°FIdeal Storage Humidity: 55% +/- 5%

    STANDARD FEATURES28 micron cast biaxially oriented polypropylene (BOPP) low elongation film

    17 micron water-based Rohm & Hass acrylic adhesive

    Specially formulated 110% elongation low stretch cast film increasing MachineLength Rol performance.

    •

    •

    •

    •AVAILABLELENGTHS

    1372m & 1500m

    AVAILABLECOLORS

    AVAILABLEWIDTHS

    Clear

    100m50m 150m

    914m

    72mm48mm 96mm

    144mm 288mm

    RoHS Compliant

    Tape manufacture in ISO 9001 & 14001 Facilities

    •

    •

    Meets FDA food requirements for indirect food contact. •Available in Hand & Machine Length Rolls•

    VERSION 3.0_0120WWW.BESTPACK.COM

    © 2020 BestPack Packaging Systems. All rights reserved. This document is BestPack Public Information.

    QUALITY • INNOVATION • COMMUNITY


DPF 206 DPF 500 DPF 313 -1000D€¦ · 100 Micron 100 Micron Brushed Metal 137 Micron Carbon Fiber 85 Micron Candy Colors 80 Micron ADHESIVE Automotive-X Repositionable (Light Grey)

DPF 206 DPF 500 DPF 313 -1000D€¦ · 100 Micron 100 Micron Brushed Metal 137 Micron Carbon Fiber 85 Micron Candy Colors 80 Micron ADHESIVE Automotive-X Repositionable (Light Grey)

Practical Design Considerations for Dense, High-Speed ......• Striplines, all differential, were 5 mil wide with 10 mil space • Dielectric thickness ~5 mils used to obtain ~100

Practical Design Considerations for Dense, High-Speed ......• Striplines, all differential, were 5 mil wide with 10 mil space • Dielectric thickness ~5 mils used to obtain ~100

DOW STYROFOAM Installation Guidelines – Piping Systems · 2.4.5.2 30 mil thick PVC is recommended on pipe sections and fittings in standard applications. A 40 mil thickness is recommended

DOW STYROFOAM Installation Guidelines – Piping Systems · 2.4.5.2 30 mil thick PVC is recommended on pipe sections and fittings in standard applications. A 40 mil thickness is recommended

Attachment 1 Panel Coating Specifications and Cleaning … Dry Film Thickness (nominal) ASTM D1400 0.20 – 0.30 mil primer 0.20 mil primer ... proven fabricators and installers in

Attachment 1 Panel Coating Specifications and Cleaning … Dry Film Thickness (nominal) ASTM D1400 0.20 – 0.30 mil primer 0.20 mil primer ... proven fabricators and installers in

DEGRADABLE PLASTIC. 2003 PLASTIC BAG REGULATIONS REDUCE RE-USE RECYCLE THREE INTERVENTIONS CHARGING & LEVY THICKNESS - 24 MICRON TYPE OF.

DEGRADABLE PLASTIC. 2003 PLASTIC BAG REGULATIONS REDUCE RE-USE RECYCLE THREE INTERVENTIONS CHARGING & LEVY THICKNESS - 24 MICRON TYPE OF.

Water filtrationsimplified. TM… · CT-1005-IO: 10 micron to 5 micron CT-2010-IO: 20 micron to10 micron CT-5020-IO: 50 micron to 20 micron Depth filtration down to 5 micron in a

Water filtrationsimplified. TM… · CT-1005-IO: 10 micron to 5 micron CT-2010-IO: 20 micron to10 micron CT-5020-IO: 50 micron to 20 micron Depth filtration down to 5 micron in a

MICRON 5 MICRON 10 MICRON 20 MICRON 35 - Meler · The Micron gear pump series offers a wide range of melters with different sizes to suit specific production needs. All units are

MICRON 5 MICRON 10 MICRON 20 MICRON 35 - Meler · The Micron gear pump series offers a wide range of melters with different sizes to suit specific production needs. All units are

A4 MICRON LEAFLET SINGLE PAGE AW CURVE FOR …...WET READY MIX MICRO CONCRETE Mil Title A4 MICRON LEAFLET SINGLE PAGE AW CURVE FOR WEB Created Date 12/13/2018 1:14:55 PM ...

A4 MICRON LEAFLET SINGLE PAGE AW CURVE FOR …...WET READY MIX MICRO CONCRETE Mil Title A4 MICRON LEAFLET SINGLE PAGE AW CURVE FOR WEB Created Date 12/13/2018 1:14:55 PM ...

Handmade, precision engineered timber doors · • micron thickness equivalent to 10 brushed coats • hard wearing finish available in 21 colours Engineered Solid Core – Kerto

Handmade, precision engineered timber doors · • micron thickness equivalent to 10 brushed coats • hard wearing finish available in 21 colours Engineered Solid Core – Kerto

DIGI COATING THICKNESS GAUGE - '+domain name+'...Quotation 100 Digital Coating Thickness / Dry Film ( DFT METER ) – least count 1 micron Base should be magnetic and coating non –

DIGI COATING THICKNESS GAUGE - '+domain name+'...Quotation 100 Digital Coating Thickness / Dry Film ( DFT METER ) – least count 1 micron Base should be magnetic and coating non –

TN-45-27: Using Micron Asynchronous PSRAM with the ADI .../media/Documents/Products/Technical Note... · DQ to DM S2 8 mil Address Adjacent address lines S1 6 mil Address lines S2

TN-45-27: Using Micron Asynchronous PSRAM with the ADI .../media/Documents/Products/Technical Note... · DQ to DM S2 8 mil Address Adjacent address lines S1 6 mil Address lines S2

MICRON 5 MICRON 10 MICRON 20 MICRON 35 - Meler · MICRON HOT/MELT MELTERS12,500 WITH PISTON PUMP Design and the cutting-edge technology have come together to create the Focke Meler

MICRON 5 MICRON 10 MICRON 20 MICRON 35 - Meler · MICRON HOT/MELT MELTERS12,500 WITH PISTON PUMP Design and the cutting-edge technology have come together to create the Focke Meler

“Micron Management“ Active Micron Level Gap Control of ...

“Micron Management“ Active Micron Level Gap Control of ...

SECTION 210700 - FIRE-SUPPRESSION SYSTEMS …€¦  · Web viewNational Fire Protection Association (NFPA). ... WHO: World Health Organization. ... (101.6 mm)]. Thickness: 2 mil

SECTION 210700 - FIRE-SUPPRESSION SYSTEMS …€¦  · Web viewNational Fire Protection Association (NFPA). ... WHO: World Health Organization. ... (101.6 mm)]. Thickness: 2 mil

ATI OEM Micron UG€¦ · ATI OEM Micron UG ... disco?

ATI OEM Micron UG€¦ · ATI OEM Micron UG ... disco?

TECHNICAL DATA SHEET...Microporous Coated Dye Sublimation Paper Product specification* Grammage: 105 g/m2 ± 6 g/m² Thickness: 131 μm ± 6 μm 5.2 mil ± 0.25 mil Benefits › Extremely

TECHNICAL DATA SHEET...Microporous Coated Dye Sublimation Paper Product specification* Grammage: 105 g/m2 ± 6 g/m² Thickness: 131 μm ± 6 μm 5.2 mil ± 0.25 mil Benefits › Extremely

The Security ID Catalogue - IFSEC Global · Card Thickness 0.51mm to 1.02mm (20 mil to 40 mil). Card Capacity 100 card feeder, 30 card stacker and hand-feed option. Visual Security

The Security ID Catalogue - IFSEC Global · Card Thickness 0.51mm to 1.02mm (20 mil to 40 mil). Card Capacity 100 card feeder, 30 card stacker and hand-feed option. Visual Security

PRECISION THICKNESS GAUGE - ATI · Measurement tip- If an increased accuracy is required, the Ultra Precision Thickness Gauge has an available resolution of 0.01 Micron/0.001 Thou

PRECISION THICKNESS GAUGE - ATI · Measurement tip- If an increased accuracy is required, the Ultra Precision Thickness Gauge has an available resolution of 0.01 Micron/0.001 Thou

COLOR THAT TRANSFORMolor SSUNDANCE MICA AND METALLIC SERIES COATING SYSTEMS opper Metallic y 9964 XL Medium e e er 1. 0.5 mil [12.7 micron] nominal PVDF Clear Coat* 2. 0.8 mil [20

COLOR THAT TRANSFORMolor SSUNDANCE MICA AND METALLIC SERIES COATING SYSTEMS opper Metallic y 9964 XL Medium e e er 1. 0.5 mil [12.7 micron] nominal PVDF Clear Coat* 2. 0.8 mil [20

covers - everyspec.comeveryspec.com/MIL-SPECS/MIL-SPECS-MIL-C/download.php?spec=MIL-C...MILITARY UIL-P-44073 ... than 10 cc of oxygen per square meter per 24 hours per mil thickness

covers - everyspec.comeveryspec.com/MIL-SPECS/MIL-SPECS-MIL-C/download.php?spec=MIL-C...MILITARY UIL-P-44073 ... than 10 cc of oxygen per square meter per 24 hours per mil thickness