HSK Tool Holders · HSK Tool Holders Germany (Headquarters) ... HSK F - DIN V 69 893-6 Test Arbors...

www.kelchgmbh.de

Technical and design modi�cations are subject to change without notice.

0720

7, 0

5/11

Prod

uct C

atal

ogue

201

1 · P

reci

sion

Too

ls

HSK Tool Holders

Germany(Headquarters)Kelch GmbHWerkstrrasse 30D-71384 Weinstadt Tel.: +49 (0) 71 51 / 2 05 22 -0 Fax: +49 (0) 71 51 / 2 05 22 [email protected]

EnglandKELCH UK Ltd.Unit 4 Cygnet DriveSwan Valley Business ParkGB-Northampton NN4 9BSTel.: +44 1604 58 38 00Fax: +44 1604 58 38 [email protected]

SwitzerlandKELCH AGWeihermattstrasse 14CH-6260 ReidenTel.: +41 62 7 58 51-26Fax: +41 62 7 58 51-25kelch @bluewin.ch

ChinaHarbin Measuring &Cutting Tool Group Co., Ltd.44 Heping RoadHarbin China 150040Tel.: +86 451 82 64 18 36Fax: +86 451 82 62 35 55www.links-china.com

USAKELCH Inc.1574 Barclay Blvd.Bu�alo Grove IL 60089Tel.: +1 847 4 59-96 00Fax: +1 847 4 59-96 [email protected]

www.kelchgmbh.de

Chapter 1 of the Product Catalogue 2010/2011 Precision Tools

Kelch GmbH · Tel.: +49 (0) 71 51 / 2 05 22 -0 · Fax: +49 (0) 71 51 / 2 05 22 -11 · [email protected] · www.kelchgmbh.de

HSK A - ISO 12164-1 Collet Chucks 1.25 - 1.28Drill Chucks 1.35Extensions 1.38Fine Boring Tools 1.36Hydraulic Expansion Chucks 1.23 - 1.24i-tec Shrink Fit Chucks 1.5 - 1.12i-tec SLOTT 1.13i-tec SLOTT Synchro 1.14Quick Change Tapping Chucks 1.15 - 1.16Reducers 1.39Reduction Sleeves 1.33 - 1.34Reduction Sleeves for Straight Shanks 1.17 - 1.22Test Arbors 1.41Tool Blanks 1.40Tooling System KELCH FLEXIBORE 1.37

HSK - Hollow Taper Shanks

®

®

®

Kelch GmbH · Tel.: +49 (0) 71 51 / 2 05 22 -0 · Fax: +49 (0) 71 51 / 2 05 22 -11 · [email protected] · www.kelchgmbh.de

HSK C - ISO 12164-1 Collet Chucks 1.47 - 1.48Extensions 1.49Hydraulic Expansion Chucks 1.46i-tec Shrink Fit Chucks 1.43Reducers 1.50Reduction Sleeves for Straight Shanks 1.44 - 1.45

HSK E - DIN V 69 893-5

HSK F - DIN V 69 893-6

Test Arbors

Collet ChucksFine Boring ToolsHydraulic Expansion Chucksi-tec Shrink Fit ChucksReduction Sleeves for Straight ShanksShell End Mill Arbors

Collet Chucksi-tec Shrink Fit ChucksShell End Mill Arbors

1.51

1.58 - 1.611.631.571.53 - 1.541.55 - 1.561.62

1.66 - 1.671.651.68

®

®

®

Kelch GmbH · Tel.: +49(0)7151 /20522-0 · Fax: +49(0)7151 /20522-11 · [email protected] · www.kelchgmbh.de1.2

Hollow Shank TechnologyTypes and Features

For use with machining centres, milling machines,• special-purpose machines with automatic tool changingCentral, axial coolant supply via coolant tube• Torque transmission via 2 driving grooves at taper end• 2 flange grooves for the tool magazine• Position notch• Bore for identification chip DIN 69 873 in the flange•

For use with machining centres, milling machines for • heavy-duty machining, lathesWith enlarged flange diameter• Decentralised coolant supply via flange or centrally via coolant tube • Torque transmission via 2 flange groovesPosition notch• Bore for identification chip DIN 69 873 in the flange•

•

Preferably for use with spindles in transfer lines and • special-purpose machines without automatic tool changing,stub spindles, extensions or reducers Central, axial coolant supplyTorque transmission via 2 driving grooves at taper end•

•

For use in all areas which require even better support• with manual tool changing via a large contact face With enlarged flange diameterDecentralised coolant supply via flange or centrally via coolant tube• Torque transmission via 2 flange grooves •

•

For use with high-frequency spindles and wood • working machinesRotationally symmetrical, without driving grooves• Torque transmission via friction grip• Central coolant supply via coolant tube is possible•

With enlarged flange diameter• Central coolant supply via coolant tube is possible•

HSK

Hol

low

Tap

er S

hank

s

Kelch GmbH · Tel.: +49(0)7151 /20522-0 · Fax: +49(0)7151 /20522-11 · [email protected] · www.kelchgmbh.de 1.3

Coolant Supply, Balancing

500400315250200160125100 80 63 50 40 31.5 25 20 16 12.5 10 8 6.3 5 4 3.15 2.5 2 1.6 1.25 1 0.8 0.63 0.5 0.4 0.315 0.25 0.2 0.16 0.125 0.1 0.08

2000 3000 6000 10000 15000 20000 30000 50000

Maximum operational speed n (1/min)

G 16

G 6.3

G 2.5

G 1

HSK

Hol

low

Tap

er S

hank

s

Hollow Shank Technology


ISO 12164-1/DIN 69 893-1 type A

Technical Data and Standard SpecificationHSK-A Tool Holders

HSK-A b1± 0.04

b2H10

b3H10

d1h10

d2 d5H11

d10max.

d11- 0.1

32 7.05 7 9 32 24 20.5 26 26.540 8.05 9 11 40 30 25.5 34 34.850 10.54 12 14 50 38 32 42 4363 12.54 16 18 63 48 40 53 5580 16.04 18 20 80 60 50 67 70

100 20.02 20 22 100 75 63 85 92

HSK-A d12- 0.1

f1- 0.1

f2min.

f3± 0.1

h1- 0.2

l1- 0.2

l6JS10

r3± 0.02

32 37 20 35 16 13 16 8.92 1.3840 45 20 35 16 17 20 11.42 1.8850 59.3 26 42 18 21 25 14.13 2.3863 72.3 26 42 18 26.5 32 18.13 2.8880 88.8 26 42 18 34 40 22.85 3.88

100 109.75 29 45 20 44 50 28.56 4.88

HSK-AH

SKH

ollo

w T

aper

Sha

nks

bore foridentification chip

1.5Kelch GmbH · Tel.: +49(0)7151 /20522-0 · Fax: +49(0)7151 /20522-11 · [email protected] · www.kelchgmbh.de

HSK-A

Standard Versioni-tec® Shrink Fit Chucks

DIN 69 882-8, type G

HSK

Hol

low

Tap

er S

hank

s

HSK-A d1 A d2 d3 l1 g L V kg

40 3 65 311.0011.320 12 17 - - 85 -- 0.340 4 65 311.0012.320 12 17 - - 85 -- 0.340 5 65 311.0013.320 12 17 - - 85 -- 0.340 6 80 311.0001.320 21 31 36 M 5 100 10 0.540 8 80 311.0002.320 21 31 36 M 6 100 10 0.540 10 80 311.0003.320 24 34 41 M 8 x 1 100 10 0.540 12 90 311.0004.320 24 34 47 M10 x 1 110 10 0.5

50 3 65 311.0011.321 12 17 - - 90 -- 0.450 4 65 311.0012.321 12 17 - - 90 -- 0.450 5 65 311.0013.321 12 17 - - 90 -- 0.450 6 80 311.0001.321 21 30 36 M 5 105 10 0.650 8 80 311.0002.321 21 30 36 M 6 105 10 0.650 10 85 311.0003.321 24 33 41 M 8 x 1 110 10 0.750 12 90 311.0004.321 24 34 47 M10 x 1 115 10 0.750 14 90 311.0005.321 27 37 47 M10 x 1 115 10 0.850 16 95 311.0006.321 27 38 50 M12 x 1 120 10 0.850 18 95 311.0007.321 33 42 50 M12 x 1 120 10 0.950 20 100 311.0008.321 33 42 52 M16 x 1 125 10 0.9

63 3 80 311.0011.322 12 17 - - 112 -- 0.763 3 120 311.0012.322 12 17 - - 152 -- 0.963 3 160 311.0013.322 12 17 - - 192 -- 1.063 4 80 311.0014.322 12 17 - - 112 -- 0.763 4 120 311.0015.322 12 17 - - 152 -- 0.963 4 160 311.0016.322 12 17 - - 192 -- 1.063 5 80 311.0017.322 12 17 - - 112 -- 0.763 5 120 311.0018.322 12 17 - - 152 -- 0.963 5 160 311.0019.322 12 17 - - 192 -- 1.063 6 80 311.0001.322 21 30 36 M 5 112 10 0.963 6 120 311.0031.322 21 32 36 M 5 152 10 1.163 6 160 311.0041.322 21 32 36 M 5 192 10 1.363 8 80 311.0002.322 21 30 36 M 6 112 10 0.963 8 120 311.0032.322 21 32 36 M 6 152 10 1.163 8 160 311.0042.322 21 32 36 M 6 192 10 1.363 10 85 311.0003.322 24 33 41 M 8 x 1 117 10 0.963 10 120 311.0033.322 24 34 41 M 8 x 1 152 10 1.263 10 160 311.0043.322 24 34 41 M 8 x 1 192 10 1.563 12 90 311.0004.322 24 34 47 M10 x 1 122 10 1.063 12 120 311.0034.322 24 34 47 M10 x 1 152 10 1.263 12 160 311.0044.322 24 34 47 M10 x 1 192 10 1.563 14 90 311.0005.322 27 37 47 M10 x 1 122 10 1.063 14 120 311.0035.322 27 36 47 M10 x 1 152 10 1.263 14 160 311.0045.322 27 36 47 M10 x 1 192 10 1.663 16 95 311.0006.322 27 38 50 M12 x 1 127 10 1.1

Ref.no.

Ref.no.Ref.no.Ref.no.

Ref.no.

1.6 Kelch GmbH · Tel.: +49(0)7151 /20522-0 · Fax: +49(0)7151 /20522-11 · [email protected] · www.kelchgmbh.de

HSK-A



HSK

Hol

low

Tap

er S

hank

s


63 16 120 311.0036.322 27 36 50 M12 x 1 152 10 1.263 16 160 311.0046.322 27 36 50 M12 x 1 192 10 1.663 18 95 311.0007.322 33 44 50 M12 x 1 127 10 1.263 18 160 311.0047.322 33 44 50 M12 x 1 192 10 1.963 18 200 311.0097.322 33 44 50 M12 x 1 232 10 2.363 20 100 311.0008.322 33 45 52 M16 x 1 132 10 1.263 20 160 311.0048.322 33 44 52 M16 x 1 192 10 1.963 20 200 311.0098.322 33 44 52 M16 x 1 232 10 2.363 25 115 311.0009.322 44 53 58 M16 x 1 147 10 1.763 25 160 311.0049.322 44 53 58 M16 x 1 192 10 2.563 25 200 311.0099.322 44 53 58 M16 x 1 232 10 3.263 32 120 311.0010.322 44 53 61 M16 x 1 152 10 1.663 32 160 311.0050.322 44 53 61 M16 x 1 192 10 2.363 32 200 311.0100.322 44 53 61 M16 x 1 232 10 3.0

80 6 85 311.0001.323 21 30 36 M 5 125 10 1.380 8 85 311.0002.323 21 30 36 M 6 125 10 1.380 10 90 311.0003.323 24 34 41 M 8 x 1 130 10 1.480 12 95 311.0004.323 24 35 47 M10 x 1 135 10 1.480 14 95 311.0005.323 27 38 47 M10 x 1 135 10 1.580 16 100 311.0006.323 27 39 50 M12 x 1 140 10 1.580 18 100 311.0007.323 33 45 50 M12 x 1 140 10 1.680 20 105 311.0008.323 33 45 52 M16 x 1 145 10 1.780 25 115 311.0009.323 44 53 58 M16 x 1 155 10 2.180 32 120 311.0010.323 44 56 61 M16 x 1 160 10 2.1

100 6 85 311.0001.324 21 30 36 M 5 135 10 2.2100 6 120 311.0031.324 21 32 36 M 5 170 10 2.4100 6 160 311.0041.324 21 32 36 M 5 210 10 2.7100 8 85 311.0002.324 21 30 36 M 6 135 10 2.2100 8 120 311.0032.324 21 32 36 M 6 170 10 2.4100 8 160 311.0042.324 21 32 36 M 6 210 10 2.7100 10 90 311.0003.324 24 34 41 M 8 x 1 140 10 2.3100 10 120 311.0033.324 24 34 41 M 8 x 1 170 10 2.6100 10 160 311.0043.324 24 34 41 M 8 x 1 210 10 2.9100 12 95 311.0004.324 24 35 47 M10 x 1 145 10 2.3100 12 120 311.0034.324 24 34 47 M10 x 1 170 10 2.6100 12 160 311.0044.324 24 34 47 M10 x 1 210 10 2.9100 14 95 311.0005.324 27 38 47 M10 x 1 145 10 2.3100 14 120 311.0035.324 27 36 47 M10 x 1 170 10 2.6100 14 160 311.0045.324 27 36 47 M10 x 1 210 10 3.0100 16 100 311.0006.324 27 39 50 M12 x 1 150 10 2.4100 16 160 311.0036.324 27 36 50 M12 x 1 210 10 3.0

Ref.no.Ref.no.


HSK-A



HSK

Hol

low

Tap

er S

hank

s


100 18 100 311.0007.324 33 45 50 M12 x 1 150 10 2.5100 18 160 311.0037.324 33 44 50 M12 x 1 210 10 3.3100 20 105 311.0008.324 33 45 52 M16 x 1 155 10 2.5100 20 160 311.0038.324 33 44 52 M16 x 1 210 10 3.3100 25 115 311.0009.324 44 53 58 M16 x 1 165 10 3.0100 25 160 311.0049.324 44 53 58 M16 x 1 210 10 3.8100 25 200 311.0099.324 44 53 58 M16 x 1 250 10 4.5100 32 120 311.0010.324 44 59 61 M16 x 1 170 10 3.0100 32 160 311.0050.324 44 53 61 M16 x 1 210 10 3.7100 32 200 311.0100.324 44 53 61 M16 x 1 250 10 4.3

For coolant tubes see accessories page 7.12.For adjusting screws see accessories page 7.13.

Ref.no.Ref.no.


HSK-A

Similar to DIN 69 882-8, type G

Conical Versioni-tec® Shrink Fit Chucks

HSK

Hol

low

Tap

er S

hank

s

HSK-A d1 A

63 3 120 311.0060.322 12 17 25 - 45 - 152 - 0.963 3 160 311.0080.322 12 17 28 - 65 - 192 - 1.063 4 120 311.0061.322 12 17 25 - 45 - 152 - 0.963 4 160 311.0081.322 12 17 28 - 65 - 192 - 1.063 5 120 311.0062.322 12 17 25 - 45 - 152 - 0.963 5 160 311.0082.322 12 17 28 - 65 - 192 - 1.063 6 120 311.0063.322 21 27 43 36 86 M 5 152 10 1.163 6 160 311.0083.322 21 27 40 36 90 M 5 192 10 1.363 6 200 311.0091.322 21 27 40 36 130 M 5 232 10 1.463 8 120 311.0064.322 21 27 43 36 86 M 6 152 10 1.163 8 160 311.0084.322 21 27 40 36 90 M 6 192 10 1.363 8 200 311.0092.322 21 27 40 36 130 M 6 232 10 1.463 10 120 311.0065.322 24 34 50 41 86 M 8 x 1 152 10 1.263 10 160 311.0085.322 24 34 40 41 95 M 8 x 1 192 10 1.563 10 200 311.0093.322 24 34 40 41 135 M 8 x 1 232 10 1.763 12 120 311.0066.322 24 34 50 47 86 M10 x 1 152 10 1.263 12 160 311.0086.322 24 34 40 47 95 M10 x 1 192 10 1.563 12 200 311.0094.322 24 34 40 47 135 M10 x 1 232 10 1.763 14 120 311.0067.322 27 36 52 47 86 M10 x 1 152 10 1.263 14 160 311.0087.322 27 36 42 47 95 M10 x 1 192 10 1.663 14 200 311.0095.322 27 36 42 47 135 M10 x 1 232 10 1.963 16 120 311.0068.322 27 36 52 50 86 M12 x 1 152 10 1.263 16 160 311.0088.322 27 36 42 50 95 M12 x 1 192 10 1.663 16 200 311.0096.322 27 36 42 50 135 M12 x 1 232 10 1.9

100 6 120 311.0063.324 21 27 59 36 75 M 5 170 10 2.4100 6 160 311.0083.324 21 27 42 36 80 M 5 210 10 2.7100 6 200 311.0091.324 21 27 42 36 120 M 5 250 10 2.8100 8 120 311.0064.324 21 27 59 36 75 M 6 170 10 2.4100 8 160 311.0084.324 21 27 42 36 80 M 6 210 10 2.7100 8 200 311.0092.324 21 27 42 36 120 M 6 250 10 2.8100 10 120 311.0065.324 24 34 66 41 75 M 8 x 1 170 10 2.6100 10 160 311.0085.324 24 34 51 41 85 M 8 x 1 210 10 2.9100 10 200 311.0093.324 24 34 51 41 125 M 8 x 1 250 10 3.2100 12 120 311.0066.324 24 34 66 47 75 M10 x 1 170 10 2.6100 12 160 311.0086.324 24 34 51 47 85 M10 x 1 210 10 2.9100 12 200 311.0094.324 24 34 51 47 125 M10 x 1 250 10 3.2100 14 120 311.0067.324 27 36 68 47 75 M10 x 1 170 10 2.6100 14 160 311.0087.324 27 36 49 47 85 M10 x 1 210 10 3.0100 14 200 311.0095.324 27 36 49 47 125 M10 x 1 250 10 3.3100 16 160 311.0088.324 27 36 49 50 85 M12 x 1 210 10 3.0100 16 200 311.0096.324 27 36 49 50 125 M12 x 1 250 10 3.3

d2 d3 d4 l1 l2 g L V kgRef.no.Ref.no.


HSK-A

Conical Versioni-tec® Shrink Fit Chucks


HSK

Hol

low

Tap

er S

hank

s

HSK-A d1 A d2 d3 d4 l1 l2 g L V kg

100 18 160 311.0089.324 33 44 52 50 95 M12 x 1 210 10 3.3100 18 200 311.0097.324 33 44 52 50 135 M12 x 1 250 10 3.8100 20 160 311.0090.324 33 44 52 52 95 M16 x 1 210 10 3.3100 20 200 311.0098.324 33 44 52 52 135 M16 x 1 250 10 3.8


Ref.no.Ref.no.


HSK-A


Slim Versioni-tec® Shrink Fit Chucks

HSK

Hol

low

Tap

er S

hank

s


63 6 120 311.0703.322 15 30 36 M 5 152 10 1.063 6 160 311.0713.322 15 30 36 M 5 192 10 1.263 8 120 311.0704.322 15 30 36 M 6 152 10 1.063 8 160 311.0714.322 15 30 36 M 6 192 10 1.263 8 200 311.0792.322 15 30 36 M 6 232 10 1.463 10 120 311.0705.322 18 33 41 M 8 x 1 152 10 1.063 10 160 311.0715.322 18 32 41 M 8 x 1 192 10 1.363 12 120 311.0706.322 18 33 47 M10 x 1 152 10 1.063 12 160 311.0716.322 18 32 47 M10 x 1 192 10 1.363 12 200 311.0794.322 18 32 47 M10 x 1 232 10 1.5

100 6 120 311.0703.324 15 30 36 M 5 170 10 2.3100 6 160 311.0713.324 15 30 36 M 5 210 10 2.5100 8 120 311.0704.324 15 30 36 M 6 170 10 2.3100 8 160 311.0714.324 15 30 36 M 6 210 10 2.5100 10 120 311.0705.324 18 33 41 M 8 x 1 170 10 2.4100 10 160 311.0715.324 18 32 41 M 8 x 1 210 10 2.6100 12 120 311.0706.324 18 33 47 M10 x 1 170 10 2.4100 12 160 311.0716.324 18 32 47 M10 x 1 210 10 2.6


Ref.no.Ref.no.


HSK-A

Ultra Short Versioni-tec® Shrink Fit Chucks


HSK

Hol

low

Tap

er S

hank

s

HSK-A d1 A d2 d3 l1 L kg

63 10 70 311.4353.322 26 33 41 102 0.963 12 70 311.4354.322 26 33 45 102 0.963 16 75 311.4356.322 29 37 50 107 0.963 20 75 311.4358.322 35 43 50 107 1.063 25 85 311.4359.322 45 53 59 117 1.3


Ref.no.Ref.no.


HSK-A

Inch Versioni-tec® Shrink Fit Chucks

HSK

Hol

low

Tap

er S

hank

s


63 0.313 3.13 311.0604.322 0.827 1.158 1.417 - 4.39 - 0.863 0.313 5.00 311.0624.322 0.827 1.260 1.417 M 6 6.26 0.394 1.163 0.375 3.13 311.0605.322 0.945 1.276 1.654 - 4.39 - 0.963 0.375 5.00 311.0625.322 0.945 1.339 1.654 M 8 x 1 6.26 0.394 1.263 0.438 3.13 311.0606.322 0.945 1.276 1.850 - 4.39 - 0.963 0.438 5.00 311.0626.322 0.945 1.339 1.850 M10 x 1 6.26 0.394 1.263 0.500 3.13 311.0607.322 0.945 1.276 1.850 - 4.39 - 0.963 0.500 5.00 311.0627.322 0.945 1.339 1.850 M10 x 1 6.26 0.394 1.263 0.563 3.38 311.0608.322 1.063 1.433 1.850 - 4.64 - 0.963 0.563 5.00 311.0628.322 1.063 1.339 1.850 M10 x 1 6.26 0.294 1.263 0.625 3.38 311.0609.322 1.063 1.433 1.969 - 4.64 - 0.963 0.625 5.00 311.0629.322 1.063 1.417 1.969 M12 x 1 6.26 0.394 1.263 0.750 3.38 311.0610.322 1.299 1.669 1.969 - 4.64 - 1.063 0.750 5.00 311.0630.322 1.299 1.732 1.969 M12 x 1 6.26 0.394 1.563 1.000 3.38 311.0612.322 1.732 2.087 2.283 - 4.64 - 1.363 1.000 5.00 311.0632.322 1.732 2.087 2.283 M16 x 1 6.26 0.394 1.963 1.250 3.38 311.0613.322 1.732 2.087 2.402 - 4.64 - 1.163 1.250 5.00 311.0633.322 1.732 2.087 2.402 M16 x 1 6.26 0.394 1.8


Ref.no.Ref.no.


HSK-A

i-tec®SLOTT

HSK

Hol

low

Tap

er S

hank

s


63 3.0 80 285.0000.322 19 22 - - 112 - 0.763 4.0 80 285.0002.322 19 22 - - 112 - 0.763 5.0 80 285.0003.322 19 22 - - 112 - 0.763 6.0 80 285.0004.322 19 22 35 M 6 112 5 0.763 6.0 100 285.0034.322 19 22 35 M 6 132 5 0.763 7.0 80 285.0005.322 19 22 35 M 6 112 5 0.763 7.0 100 285.0035.322 19 22 35 M 6 132 5 0.863 8.0 80 285.0006.322 19 22 35 M 6 112 5 0.763 8.0 100 285.0036.322 19 22 35 M 6 132 5 0.863 9.0 80 285.0007.322 19 22 37 M 6 112 5 0.763 9.0 100 285.0037.322 19 22 37 M 6 132 5 0.863 10.0 80 285.0008.322 19 22 37 M 6 112 5 0.763 10.0 100 285.0038.322 22 22 37 M 6 132 5 0.863 11.0 100 285.0009.322 22 22 37 M 6 132 5 0.863 12.0 100 285.0020.322 27 30 37 M 6 132 5 0.863 16.0 100 285.0012.322 27 30 40 M 6 132 5 0.9

For coolant tubes see accessories page 7.12.For adjusting screws see accessories page 7.13.For shrink rings see accessories page 7.2.

Ref.no.Ref.no.


HSK-A

with Minimum Length Compensationi-tec®SLOTT Synchro

HSK

Hol

low

Tap

er S

hank

s

HSK-A d1 A d2 d3 d4 l1 l2 g L V kg

63 3.0 100 285.0200.322 19 20 34 - 47 - 132 - 0.963 3.5 100 285.0201.322 19 20 34 - 47 - 132 - 0.963 4.0 100 285.0202.322 19 20 34 - 47 - 132 - 0.963 4.5 100 285.0203.322 19 20 34 - 47 - 132 - 0.963 5.0 100 285.0204.322 19 20 34 - 47 - 132 - 0.963 6.0 100 285.0205.322 19 20 34 35 47 M 5 132 5 0.963 7.0 100 285.0206.322 19 20 34 35 47 M 5 132 5 0.963 8.0 100 285.0207.322 19 20 34 35 47 M 6 132 5 0.963 9.0 100 285.0208.322 19 20 34 37 47 M 6 132 5 0.963 10.0 110 285.0220.322 22 30 45 37 52 M 8 x 1 142 5 1.163 11.0 110 285.0221.322 22 30 45 37 52 M 8 x 1 142 5 1.163 12.0 115 285.0222.322 27 30 45 37 57 M10 x 1 147 5 1.263 14.0 115 285.0223.322 27 30 45 40 57 M10 x 1 147 5 1.263 16.0 115 285.0224.322 27 30 45 40 57 M12 x 1 147 5 1.2

For shrink rings see accessories page 7.2.

Ref.no.Ref.no.


HSK-A

with Minimum Length CompensationQuick Change Tapping Chucks

HSK

Hol

low

Tap

er S

hank

s

HSK-A Thread A Threadshaft

d1 d2 L kg

40 M 3 - M12 69 440.0301.320 2 - 10 20 43 89 0.7

50 M 3 - M12 70 440.0301.321 2 - 10 20 43 95 0.9

63 M 3 - M12 64 440.0301.322 2 - 10 20 43 96 1.363 M 6 - M20 97 440.0302.322 2 - 16 32 60 129 2.0

100 M 3 - M12 70 440.0301.324 2 - 10 20 43 120 2.3100 M 6 - M20 91 440.0302.324 2 - 16 32 60 141 2.8

For coolant tubes see accessories page 7.12.For i-tec ®SLOTT quick change inserts see page 5.10.For ER quick change inserts see page 5.11.

Ref.no.Ref.no.


HSK-A

Quick Change Tapping Chucks

HSK

Hol

low

Tap

er S

hank

s

HSK-A Thread A Threadshaft

d1 d2 L C T ZA kg

40 M 3 - M14 73 440.0011.320 3.5 - 11 19 36 93 5 8 2.1 0.6

50 M 3 - M14 77 440.0011.321 3.5 - 11 19 36 102 5 8 2.1 0.9

63 M 3 - M14 79 440.0011.322 3.5 - 11 19 36 111 5 8 2.1 1.263 M 4.5 - M24 113 440.0012.322 6 - 18 31 53 145 8.5 15 2.8 2.1

80 M 3 - M14 83.5 440.0011.323 3.5 - 11 19 36 123.5 5 8 2.1 2.080 M 4.5 - M24 117.5 440.0012.323 6 - 18 31 53 157.5 8.5 15 2.8 2.9

100 M 4.5 - M24 119.5 440.0011.324 6 - 18 31 53 169.5 8.5 15 2.8 4.0

For coolant tubes see accessories page 7.12.For quick change inserts see page 5.12 and 5.14

Ref.no.Ref.no.


HSK-A

with Lateral Driving Surface (Weldon)Reduction Sleeves for Straight Shanks

DIN 69 882-4

HSK

Hol

low

Tap

er S

hank

s

HSK-A d1 A d2 l1 l2 L d1tolerance

kg

40 6 60 420.0001.320 25 35 40 80 + 0.005 0.640 8 60 420.0002.320 28 35 40 80 + 0.005 0.740 10 60 420.0003.320 35 39 40 80 + 0.005 0.740 12 70 420.0004.320 42 44 50 90 + 0.005 1.040 14 75 420.0005.320 44 44 55 95 + 0.005 1.140 16 75 420.0006.320 48 47 55 95 + 0.005 1.1

50 6 65 420.0001.321 25 35 39 90 + 0.005 0.750 8 65 420.0002.321 28 35 39 90 + 0.005 0.850 10 65 420.0003.321 35 39 39 90 + 0.005 0.850 12 80 420.0004.321 42 44 54 105 + 0.005 0.950 14 80 420.0005.321 44 44 54 105 + 0.005 1.050 16 80 420.0006.321 48 47 54 105 + 0.005 1.050 18 80 420.0007.321 50 47 54 105 + 0.005 1.050 20 80 420.0008.321 52 49 54 105 + 0.007 1.0

63 6 65 420.0001.322 25 35 39 97 + 0.005 0.863 6 120 420.0031.322 25 35 94 152 + 0.005 1.063 8 65 420.0002.322 28 35 39 97 + 0.005 0.863 8 120 420.0032.322 28 35 94 152 + 0.005 1.163 10 65 420.0003.322 35 39 39 97 + 0.005 0.963 10 120 420.0033.322 35 39 94 152 + 0.005 1.363 12 80 420.0004.322 42 44 54 112 + 0.005 1.263 12 120 420.0034.322 42 44 94 152 + 0.005 1.663 14 80 420.0005.322 44 44 54 112 + 0.005 1.263 14 120 420.0035.322 44 44 94 152 + 0.005 1.763 16 80 420.0006.322 48 47 54 112 + 0.005 1.363 16 120 420.0036.322 48 47 94 152 + 0.005 1.863 18 80 420.0007.322 50 47 54 112 + 0.005 1.363 18 120 420.0037.322 50 47 94 152 + 0.005 1.963 20 80 420.0008.322 52 49 54 112 + 0.007 1.463 20 120 420.0038.322 52 49 94 152 + 0.007 2.063 25 110 420.0009.322 65 54 84 142 + 0.007 2.363 32 110 420.0010.322 72 58 84 142 + 0.007 2.5

80 6 80 420.0001.323 25 35 54 120 + 0.005 1.580 8 80 420.0002.323 28 35 54 120 + 0.005 1.580 10 80 420.0003.323 35 39 54 120 + 0.005 1.780 12 80 420.0004.323 42 44 54 120 + 0.005 1.880 14 80 420.0005.323 44 44 54 120 + 0.005 1.980 16 100 420.0006.323 48 47 74 140 + 0.005 2.180 18 100 420.0007.323 50 47 74 140 + 0.005 2.380 20 100 420.0008.323 52 49 74 140 + 0.007 2.480 25 100 420.0009.323 65 54 74 140 + 0.007 2.980 32 110 420.0010.323 72 58 84 150 + 0.007 3.4

Ref.no.Ref.no.


HSK-A

DIN 69 882-4


HSK

Hol

low

Tap

er S

hank

s

HSK-A d1 A d2 l1 l2 L d1tolerance

kg

100 6 80 420.0001.324 25 35 51 130 + 0.005 2.0100 6 160 420.0041.324 25 35 131 210 + 0.005 2.5100 8 80 420.0002.324 28 35 51 130 + 0.005 2.2100 8 160 420.0042.324 28 35 131 210 + 0.005 2.6100 10 80 420.0003.324 35 39 51 130 + 0.005 2.4100 10 160 420.0043.324 35 39 131 210 + 0.005 3.0100 12 80 420.0004.324 42 44 51 130 + 0.005 2.5100 12 160 420.0044.324 42 44 131 210 + 0.005 3.4100 14 80 420.0005.324 44 44 51 130 + 0.005 2.5100 14 160 420.0045.324 44 44 131 210 + 0.005 3.5100 16 100 420.0006.324 48 47 71 150 + 0.005 2.9100 16 160 420.0046.324 48 47 131 210 + 0.005 3.8100 18 100 420.0007.324 50 47 71 150 + 0.005 2.9100 18 160 420.0047.324 50 47 131 210 + 0.005 4.0100 20 100 420.0008.324 52 49 71 150 + 0.007 3.0100 20 160 420.0048.324 52 49 131 210 + 0.007 4.1100 25 100 420.0009.324 65 54 71 150 + 0.007 3.5100 25 160 420.0049.324 65 54 131 210 + 0.007 5.0100 32 100 420.0010.324 72 58 71 150 + 0.007 3.7100 32 160 420.0050.324 72 58 131 210 + 0.007 5.6100 40 120 420.0011.324 80 75 191 170 + 0.007 5.9

For coolant tubes see accessories page 7.12.For clamping screws see accessories page 7.16.

Ref.no.Ref.no.


HSK-A

with Lateral Driving Surface, Conical VersionReduction Sleeves for Straight Shanks

Similar to DIN 69 882-4

HSK

Hol

low

Tap

er S

hank

s

HSK-A d1 A d2 d3 l1 l2 l3 L d1tolerance

kg

63 6 120 420.0061.322 25 32 35 94 60 152 + 0.005 1.063 8 120 420.0062.322 28 35 35 94 60 152 + 0.005 1.163 10 120 420.0063.322 35 42 39 94 60 152 + 0.005 1.3

100 6 160 420.0081.324 25 35 35 131 80 210 + 0.005 2.5100 8 160 420.0082.324 28 38 35 131 80 210 + 0.005 2.6100 10 160 420.0083.324 35 45 39 131 80 210 + 0.005 3.0100 12 160 420.0084.324 42 52 44 131 80 210 + 0.005 3.4100 14 160 420.0085.324 44 54 44 131 80 210 + 0.005 3.5100 16 160 420.0086.324 48 58 47 131 80 210 + 0.005 3.8100 18 160 420.0087.324 50 60 47 131 80 210 + 0.005 4.0100 20 160 420.0088.324 52 62 49 131 80 210 + 0.007 4.1


Ref.no.Ref.no.


HSK-A

DIN 69 882-5

with Inclined Clamping Surface (Whistle Notch)Reduction Sleeves for Straight Shanks

HSK

Hol

low

Tap

er S

hank

s

HSK-A d1 A d2 l1 l2 g L d1tolerance

V kg

40 6 80 420.0151.320 25 38 60 M 5 100 + 0.005 10 0.640 8 80 420.0152.320 28 38 60 M 6 100 + 0.005 10 0.740 10 80 420.0153.320 35 41 60 M 8 100 + 0.005 10 0.740 12 90 420.0154.320 42 47 70 M10 110 + 0.005 10 1.140 14 90 420.0155.320 44 47 70 M10 110 + 0.005 10 1.240 16 90 420.0156.320 48 50 70 M12 110 + 0.005 10 1.2

50 6 80 420.0151.321 25 38 54 M 5 105 + 0.005 10 0.850 8 80 420.0152.321 28 38 54 M 6 105 + 0.005 10 0.950 10 80 420.0153.321 35 41 54 M 8 105 + 0.005 10 0.950 12 90 420.0154.321 42 47 64 M10 115 + 0.005 10 1.350 14 90 420.0155.321 44 47 64 M10 115 + 0.005 10 1.450 16 90 420.0156.321 48 50 64 M12 115 + 0.005 10 1.450 18 90 420.0157.321 50 50 64 M12 115 + 0.005 10 1.650 20 100 420.0158.321 52 52 74 M16 125 + 0.007 10 1.7

63 6 80 420.0151.322 25 38 54 M 5 112 + 0.005 10 0.963 8 80 420.0152.322 28 38 54 M 6 112 + 0.005 10 0.963 10 80 420.0153.322 35 41 54 M 8 112 + 0.005 10 1.063 12 90 420.0154.322 42 47 64 M10 122 + 0.005 10 1.363 14 90 420.0155.322 44 47 64 M10 122 + 0.005 10 1.363 16 100 420.0156.322 48 50 74 M12 132 + 0.005 10 1.663 18 100 420.0157.322 50 50 74 M12 132 + 0.005 10 1.663 20 100 420.0158.322 52 52 74 M16 132 + 0.007 10 1.763 25 110 420.0159.322 65 58 84 M20 142 + 0.007 10 2.263 32 110 420.0160.322 72 61 84 M20 142 + 0.007 10 2.5

80 6 90 420.0151.323 25 38 64 M 5 130 + 0.005 10 1.680 8 90 420.0152.323 28 38 64 M 6 130 + 0.005 10 1.680 10 90 420.0153.323 35 41 64 M 8 130 + 0.005 10 2.080 12 100 420.0154.323 42 47 74 M10 140 + 0.005 10 2.180 14 100 420.0155.323 44 47 74 M10 140 + 0.005 10 2.180 16 100 420.0156.323 48 50 74 M12 140 + 0.005 10 2.380 18 100 420.0157.323 50 50 74 M12 140 + 0.005 10 2.480 20 110 420.0158.323 52 52 84 M16 150 + 0.007 10 2.680 25 110 420.0159.323 65 58 94 M20 160 + 0.007 10 3.180 32 120 420.0160.323 72 61 94 M20 160 + 0.007 10 3.7

100 6 90 420.0151.324 25 38 61 M 5 140 + 0.005 10 2.2100 8 90 420.0152.324 28 38 61 M 6 140 + 0.005 10 2.3100 10 90 420.0153.324 35 41 61 M 8 140 + 0.005 10 2.4100 12 100 420.0154.324 42 47 71 M10 150 + 0.005 10 2.7100 14 100 420.0155.324 44 47 71 M10 150 + 0.005 10 2.8100 16 100 420.0156.324 48 50 71 M12 150 + 0.005 10 2.9100 18 100 420.0157.324 50 50 71 M12 150 + 0.005 10 2.9

Ref.no.Ref.no.


HSK-A


DIN 69 882-5

HSK

Hol

low

Tap

er S

hank

s

HSK-A d1 A d2 l1 l2 g L d1tolerance

V kg

100 20 110 420.0158.324 52 52 81 M16 160 + 0.007 10 3.1100 25 120 420.0159.324 65 58 91 M20 170 + 0.007 10 3.9100 32 120 420.0160.324 72 61 91 M20 170 + 0.007 10 4.3

For coolant tubes see accessories page 7.12.For clamping screws see accessories page 7.16.For adjusting screws see accessories page 7.13.

Ref.no.Ref.no.


HSK-A

Slim VersionReduction Sleeves for Straight Shanks

HSK

Hol

low

Tap

er S

hank

s

HSK-A d1 A d2 d3 l1 l2 l3 g L d1tolerance

kg

63 6 160 420.0702.322 22 32 134 18 10 M 5 192 + 0.005 1.263 8 160 420.0704.322 24 34 134 18 10 M 6 192 + 0.005 1.363 10 160 420.0706.322 25 38 134 20 10 M 8 192 + 0.005 1.463 12 160 420.0708.322 26 42 134 22.5 10 M10 192 + 0.005 1.663 14 160 420.0710.322 28 46 134 22.5 12 M10 192 + 0.005 1.763 16 160 420.0712.322 30 44 134 24 12 M12 192 + 0.005 1.863 18 160 420.0714.322 32 46 134 24 12 M12 192 + 0.005 1.963 20 160 420.0716.322 34 50 134 25 12 M16 192 + 0.005 2.0


Ref.no.Ref.no.


HSK-A

Hydraulic Expansion Chucks

DIN 69 882-7

HSK

Hol

low

Tap

er S

hank

s

HSK-A d1 A d2 d3 d4 l1 l2 g V kg

50 6 70 702.0001.321 22 40 26 37.5 26.5 M 5 10 0.850 8 70 702.0002.321 24 40 28 37.5 27.5 M 6 10 0.850 10 75 702.0003.321 26 40 30 42.5 32.5 M 8 x 1 10 0.850 12 80 702.0004.321 28 40 32 47.5 43.5 M10 x 1 10 0.850 14 80 702.0005.321 30 40 34 47.5 44.0 M10 x 1 10 0.850 16 90 702.0006.321 34 53 40 52.5 49.5 M12 x 1 10 1.150 18 90 702.0007.321 36 57 42 52.5 29.5 M12 x 1 10 1.150 20 90 702.0008.321 38 60 42 52.5 29.5 M16 x 1 10 1.1

63 6 70 702.0001.322 22 50 26 37.5 24.5 M 5 10 1.163 6 150 702.0031.322 22 50 26 37.5 103 M 5 10 1.563 6 200 702.0032.322 22 50 26 37.5 153 M 5 10 1.763 8 70 702.0002.322 24 50 28 37.5 25.5 M 6 10 1.163 8 150 702.0033.322 24 50 28 37.5 102 M 6 10 1.563 8 200 702.0034.322 24 50 28 37.5 152 M 6 10 1.763 10 80 702.0003.322 26 50 30 42.5 35.5 M 8 x 1 10 1.163 10 150 702.0035.322 26 50 30 42.5 104 M 8 x 1 10 1.563 10 200 702.0036.322 26 50 30 42.5 154 M 8 x 1 10 1.863 12 85 702.0004.322 28 50 32 47.5 41.5 M10 x 1 10 1.163 12 150 702.0037.322 28 50 32 47.5 105 M10 x 1 10 1.563 12 200 702.0038.322 28 50 32 47.5 155 M10 x 1 10 1.863 14 85 702.0005.322 30 50 34 47.5 41.5 M10 x 1 10 1.363 14 150 702.0039.322 30 50 34 47.5 105 M10 x 1 10 1.763 14 200 702.0040.322 30 50 34 47.5 155 M10 x 1 10 2.063 16 90 702.0006.322 34 50 38 52.5 48.0 M12 x 1 10 1.363 16 150 702.0041.322 34 50 38 52.5 106.5 M12 x 1 10 1.863 16 200 702.0042.322 34 50 38 52.5 156.5 M12 x 1 10 2.263 18 90 702.0007.322 36 50 40 52.5 48.5 M12 x 1 10 1.363 18 150 702.0043.322 36 50 40 52.5 107 M12 x 1 10 1.963 18 200 702.0044.322 36 50 40 52.5 157 M12 x 1 10 2.363 20 90 702.0008.322 38 50 42 52.5 49.5 M16 x 1 10 1.363 20 150 702.0045.322 38 50 42 52.5 108 M16 x 1 10 1.963 20 200 702.0046.322 38 50 42 52.5 158 M16 x 1 10 2.563 25 120 702.0009.322 53 63 57 61.0 52.0 M16 x 1 10 2.363 32 125 702.0010.322 60 75 64 65.0 61.0 M16 x 1 10 2.9

kelch_reg01.indd 23 03.09.2010 13:47:12

Ref.no.Ref.no.


HSK-A

DIN 69 882-7


HSK

Hol

low

Tap

er S

hank

s

HSK-A d1 A d2 d3 d4 l1 l2 g V kg

80 6 70 702.0001.323 22 50 26 37.5 24.5 M 5 10 1.580 8 70 702.0002.323 24 50 28 37.5 25.5 M 6 10 1.580 10 80 702.0003.323 26 50 30 42.5 35.5 M 8 x 1 10 1.580 12 85 702.0004.323 28 50 32 47.5 41.5 M10 x 1 10 1.680 14 85 702.0005.323 30 50 34 47.5 41.5 M10 x 1 10 1.680 16 95 702.0006.323 34 50 38 52.5 47.5 M12 x 1 10 1.780 18 95 702.0007.323 36 50 40 52.5 48.5 M12 x1 10 1.880 20 95 702.0008.323 38 50 42 52.5 49.5 M16 x 1 10 1.880 25 115 702.0009.323 53 63 57 61.5 52.0 M16 x 1 10 2.680 32 125 702.0010.323 60 75 64 65.0 62.2 M16 x 1 10 3.2

100 6 75 702.0001.324 22 50 26 37.5 24.5 M 5 10 2.4100 8 75 702.0002.324 24 50 28 37.5 25.5 M 6 10 2.4100 10 90 702.0003.324 26 50 30 42.5 35.5 M 8 x 1 10 2.5100 12 95 702.0004.324 28 50 32 47.5 41.5 M10 x 1 10 2.5100 14 95 702.0005.324 30 50 34 47.5 41.8 M10 x 1 10 2.5100 16 100 702.0006.324 34 50 38 52.5 47.5 M12 x 1 10 2.7100 18 100 702.0007.324 36 50 40 52.5 48.5 M12 x 1 10 2.7100 20 105 702.0008.324 38 75 42 52.5 45.0 M16 x 1 10 3.2100 25 115 702.0009.324 51 75 57 61.0 52.0 M16 x 1 10 3.3100 32 120 702.0010.324 60 75 64 65.0 61.0 M16 x 1 10 3.8

For coolant tubes see accessories page 7.12.For adjusting screws see accessories 7.15.For reduction bushes see accessories page 7.15.

Ref.no.Ref.no.Ref.no.


HSK-A

for ER/ESX ER-16 Collets with Internal ThreadCollet Chucks

DIN 69 882-6

HSK

Hol

low

Tap

er S

hank

s

HSK-A Clampingrange

A d1 d2 D l1 l2 g L V kg

40 0.5 - 10 80 698.0001.320 - 28 28 - 27 M10 100 10 0.4

50 0.5 - 10 100 698.0001.321 - 28 28 - 27 M10 125 10 0.6

63 0.5 - 10 75 698.0011.322 - 28 28 - 27 M10 107 10 0.863 0.5 - 10 100 698.0001.322 - 28 28 - 27 M10 132 10 1.063 0.5 - 10 160 698.0002.322 45 28 28 85 27 M10 192 10 1.7

100 0.5 - 10 100 698.0001.324 - 28 28 - 27 M12 150 10 2.9100 0.5 - 10 160 698.0002.324 60 28 28 85 27 M12 210 10 3.4

For coolant tubes see accessories page 7.12.For adjusting screws see accessories page 7.13.For further accessories such as collets, clamping nuts and clamping keys see accessories from page 7.3 to page 7.8.

UseFor clamping tools with straight shankaccording to DIN ISO 15488 (DIN 6499) type A and B.

DesignPermissible concentricity deviation of hollow taper shank to inner taper 0.003 mm.

nut according to ISO 1940-1 G 6.3 at 12,000 min Clamping nut balanced according to ISO 1940-1 G 6.3 at 18,000 min

Standard SpecificationCollet chuck including clamping nut.

NoteCollet chucks are equipped with internalthread for adjusting screws.Other designs and sizes are available on request.

Ref.no.Ref.no.

Chucks are fine balanced without clamping

Standard Specification

Use

Design

Note

Design

Use


HSK-A


for ER/ESX ER-11/16 without Internal ThreadCollet Chucks

HSK

Hol

low

Tap

er S

hank

s

HSK-A Clampingrange

A d1 d2 D l1 l2 L kg

40 0.5 - 7 80 698.0211.320 - 18.5 19 - 42 100 0.340 0.5 - 10 80 698.0201.320 - 28 28 - 61 100 0.4

50 0.5 - 10 100 698.0201.321 - 28 28 - 70 125 0.6

63 0.5 - 10 100 698.0201.322 - 28 28 - 70 132 1.063 0.5 - 10 160 698.0202.322 46 28 28 85 70 192 1.7

100 0.5 - 10 100 698.0201.324 - 28 28 - 70 150 2.9100 0.5 - 10 160 698.0202.324 45 28 28 85 70 210 3.4

For coolant tubes see accessories page 7.12.For further accessories such as collets, clamping nuts or clamping keys see accessories from page 7.3 to page 7.8.



nuts according to ISO 1940-1 G 2.5at 25,000 min .Clamping nut balanced according to ISO 1940-1 G 2.5 at 25,000 min .

-1


NoteChip passage drilled out.Other designs and sizes are available on request.

Ref.no.Ref.no.


-1

-1-1

Use

Design Standard Specification

Note

Ref.no.


HSK-A

for ER/ESX ER-25/32/40 with Internal ThreadCollet Chucks

DIN 69 882-6

HSK

Hol

low

Tap

er S

hank

s

HSK-A Clampingrange

A D l1 g L V kg

40 1 - 16 80 697.0003.320 42 36 M10 100 10 0.5

50 1 - 16 100 697.0004.321 42 36 M10 125 10 1.2

63 1 - 16 75 697.0014.322 42 36 M10 107 10 0.963 1 - 16 80 697.0003.322 42 36 M10 112 10 1.063 1 - 16 100 697.0004.322 42 36 M10 132 10 1.263 1 - 16 160 697.0044.322 42 36 M10 172 10 1.863 2 - 20 75 697.0011.322 50 40 M16 107 10 1.063 2 - 20 100 697.0001.322 50 40 M16 132 10 1.263 2 - 20 160 697.0041.322 50 40 M16 173 10 1.763 3 - 26 90 697.0012.322 63 58 M16 122 10 1.463 3 - 26 120 697.0002.322 63 58 M16 152 10 1.7

80 1 - 16 100 697.0003.323 42 36 M10 140 10 3.080 2 - 20 100 697.0001.323 50 40 M16 140 10 2.780 3 - 26 120 697.0002.323 63 58 M16 160 10 3.2

100 1 - 16 100 697.0004.324 42 36 M10 150 10 2.6100 1 - 16 160 697.0044.324 42 36 M10 210 10 3.2100 2 - 20 100 697.0001.324 50 40 M16 150 10 2.7100 2 - 20 160 697.0041.324 50 40 M16 210 10 3.6100 3 - 26 120 697.0002.324 63 58 M16 170 10 3.4100 3 - 26 160 697.0042.324 63 58 M16 210 10 4.2

For coolant tubes see accessories page 7.12.For adjusting screws see accessories page 7.14.For further accessories such as collets, clamping nuts or clamping keys see accessories from page 7.3 to page 7.8.

Ref.no.Ref.no.

For clamping tools with straight shankaccording to DIN ISO 15488 (DIN 6499) type A and B.

Permissible concentricity deviation of hollow taper shank to inner taper 0.003 mm.

nut according to ISO 1940-1 G 6.3 at 12,000 min Clamping nut balanced according to ISO 1940-1 G 6.3 at 18,000 min

Collet chuck including clamping nut.

Collet chucks are equipped with internalthread for adjusting screws.Other designs and sizes are available on request.



Note

Design

Use NoteUse


Use

Design Standard SpecificationStandard Specification


HSK-A


for ER/ESX ER-25/32/40 without Internal ThreadCollet Chucks

HSK

Hol

low

Tap

er S

hank

s

HSK-A ClampingRange

A D l1 L kg

40 1 - 16 80 697.0203.320 42 60 100 0.5

50 1 - 16 100 697.0204.321 42 72 125 1.250 2 - 20 100 697.0201.321 50 73 125 1.2

63 1 - 16 100 697.0204.322 42 69 132 1.263 1 - 16 160 697.0244.322 42 69 172 1.863 2 - 20 100 697.0201.322 50 74 132 1.263 2 - 20 160 697.0241.322 50 73 173 1.763 3 - 26 120 697.0202.322 63 87 152 1.763 3 - 26 160 697.0242.322 63 87 192 2.3

100 1 - 16 100 697.0204.324 42 69 150 2.6100 1 - 16 160 697.0244.324 42 69 210 3.2100 2 - 20 100 697.0201.324 50 70 150 2.7100 2 - 20 160 697.0241.324 50 70 210 3.6100 3 - 26 120 697.0202.324 63 87 170 3.4100 3 - 26 160 697.0242.324 63 87 210 4.2


Ref.no.Ref.no.

For clamping tools with straight shankaccording to DIN ISO 15488 (DIN 6499) type A and B.

Permissible concentricity deviation of hollow taper shank to inner taper 0.003 mm.

nuts according to ISO 1940-1 G 2.5at 25,000 min .Clamping nut balanced according to ISO 1940-1 G 2.5 at 25,000 min

Collet chuck including clamping nut.

Chip passage drilled out.Other designs and sizes are available on request.


Use


NoteNote


Use

Design

UseUse


Note

Design


HSK-A

for Milling Cutters with Longitudinal Slot or Tenon DriveShell End Mill Arbors

DIN 69 882-2

HSK

Hol

low

Tap

er S

hank

s

HSK-A d1 A d2 l3 l4 L A1 kg

40 16 50 489.0001.320 32 17 27 87 40 0.540 22 50 489.0002.320 40 19 31 89 38 0.640 27 65 489.0003.320 48 21 33 106 53 0.8

50 16 50 489.0001.321 32 17 27 92 40 0.750 22 50 489.0002.321 40 19 31 94 38 0.850 27 65 489.0003.321 48 21 33 111 53 1.050 32 65 489.0004.321 58 24 38 114 51 1.2

63 16 60 489.0001.322 32 17 27 109 50 0.963 16 100 489.0031.322 32 17 27 149 90 1.263 16 160 489.0041.322 32 17 27 209 150 2.063 22 60 489.0002.322 40 19 31 111 48 1.063 22 100 489.0032.322 40 19 31 151 88 1.563 22 160 489.0042.322 40 19 31 211 148 2.263 27 60 489.0003.322 48 21 33 113 48 1.163 27 100 489.0033.322 48 21 33 153 88 1.663 27 160 489.0043.322 48 21 33 213 148 2.463 32 60 489.0004.322 58 24 38 116 46 1.263 32 100 489.0034.322 58 24 38 156 86 2.063 32 160 489.0044.322 58 24 38 216 146 3.263 40 70 489.0005.322 70 27 41 129 56 1.563 40 100 489.0035.322 70 27 41 159 86 2.463 40 160 489.0045.322 70 27 41 219 146 4.2

80 16 60 489.0001.323 32 17 27 117 50 1.580 22 60 489.0002.323 40 19 31 119 48 1.880 27 60 489.0003.323 48 21 33 121 48 2.080 32 60 489.0004.323 58 24 38 124 46 2.480 40 70 489.0005.323 70 27 41 137 56 2.980 50 80 489.0006.323 90 30 46 150 64 3.3

100 16 60 489.0001.324 32 17 27 127 50 2.0100 16 100 489.0031.324 32 17 27 167 90 2.6100 16 160 489.0041.324 32 17 27 227 150 3.4100 22 60 489.0002.324 40 19 31 129 48 2.3100 22 100 489.0032.324 40 19 31 169 88 2.8100 22 160 489.0042.324 40 19 31 229 148 3.9100 27 60 489.0003.324 48 21 33 131 48 2.4100 27 100 489.0033.324 48 21 33 171 88 3.1100 27 160 489.0043.324 48 21 33 231 148 3.8100 32 60 489.0004.324 58 24 38 134 46 2.5100 32 100 489.0034.324 58 24 38 174 86 3.5100 32 160 489.0044.324 58 24 38 234 146 4.5100 40 70 489.0005.324 70 27 41 147 56 3.2

Ref.no.Ref.no.


HSK-A

DIN 69 882-2


HSK

Hol

low

Tap

er S

hank

s

HSK-A d1 A d2 l3 l4 L A1 kg

100 40 100 489.0035.324 70 27 41 177 86 3.9100 40 160 489.0045.324 70 27 41 237 146 5.8100 50 80 489.0006.324 90 30 46 160 64 3.8

For coolant tubes see accessories page 7.12.For further accessories such as cutter retaining screws, keys, feather keys or drive rings see accessories from page 7.16 to page 7.17.

UseFor clamping shell end mills and milling cutters with longitudinal slot or tenon drive.

DesignPermissible concentricity deviation of hollow taper shank to arbor d1 = 0.006 mm.

Chucks are fine balanced according to ISO 1940-1 G 2.5 at 25,000 minCutter drive according to DIN 138. Central boring for coolant supply.

Standard SpecificationCutter retaining screw, feather key withwithdrawal thread and drive ring included.

NoteOther designs and sizes are available on request.

Ref.no.Ref.no.

Cutter drive according to DIN 138.

Note

Standard SpecificationUse

Design


HSK-A

with Enlarged Contact DiameterShell End Mill Arbors

DIN 69 882-3

HSK

Hol

low

Tap

er S

hank

s

HSK-A d1 A d2 l3 L kg

50 16 50 579.0009.321 40 17 94 0.850 22 60 579.0001.321 50 19 104 0.950 27 60 579.0002.321 60 21 106 1.1

63 16 50 579.0009.322 40 17 99 0.963 16 100 579.0039.322 40 17 149 1.463 16 160 579.0049.322 40 17 209 2.063 22 50 579.0001.322 50 19 101 1.163 22 100 579.0031.322 50 19 151 1.863 22 160 579.0041.322 50 19 211 2.763 27 60 579.0002.322 60 21 113 1.463 27 100 579.0032.322 60 21 153 2.263 27 160 579.0042.322 60 21 213 3.563 32 60 579.0003.322 78 24 116 1.663 32 100 579.0033.322 78 24 156 3.063 32 160 579.0043.322 78 24 216 5.263 40 60 579.0004.322 89 27 119 1.863 40 100 579.0034.322 89 27 159 3.9

80 22 50 579.0001.323 50 19 109 2.180 27 50 579.0002.323 60 21 111 2.380 32 60 579.0003.323 78 24 114 2.580 40 60 579.0004.323 89 27 117 3.3

100 16 50 579.0009.324 40 17 117 2.2100 16 100 579.0039.324 40 17 167 2.7100 16 160 579.0049.324 40 17 227 3.3100 22 50 579.0001.324 50 19 119 2.4100 22 100 579.0031.324 50 19 169 3.1100 22 160 579.0041.324 50 19 229 4.0100 27 50 579.0002.324 60 21 121 2.5100 27 100 579.0032.324 60 21 171 3.6100 27 160 579.0042.324 60 21 231 4.7100 32 50 579.0003.324 78 24 124 2.9100 32 100 579.0033.324 78 24 174 4.7100 32 160 579.0043.324 78 24 234 6.9100 40 60 579.0004.324 89 27 137 3.5100 40 100 579.0034.324 89 27 177 5.4100 40 160 579.0044.324 89 27 237 8.3

Ref.no.Ref.no.


HSK-A

DIN 69 882-3


HSK

Hol

low

Tap

er S

hank

s

HSK-A d1 A d2 l3 L kg

100 50 70 579.0005.324 120 30 150 5.4100 50 100 579.0035.324 120 30 180 7.1100 50 160 579.0045.324 120 30 240 11.8100 60 70 579.0006.324 140 40 160 6.3100 60 100 579.0036.324 140 40 190 9.1

For coolant tubes see accessories page 7.12.For further accessories such as cutter retaining screws, keys or drive keys see accessories from page 7.16 to page 7.18.

UseFor clamping shell end mills and milling cutters with tenon drive.


ISO 1940-1 G 2.5 at 25,000 min Central boring for coolant supply.Clamping Ø 40 and 60 with 4 threaded holes for holding cutters with tool holdingaccording to DIN 2079.

Standard SpecificationCutter retaining screw and tightened drive keys included.


Ref.no.Ref.no.

Chucks are balanced according to

Use

Design


Note


HSK-A

for Morse Tapers with TangReduction Sleeves

DIN 228, part 2 type D

HSK

Hol

low

Tap

er S

hank

s

HSK-A MT A d1 l1 L kg

50 1 100 454.0001.321 25 74 125 1.050 2 120 454.0002.321 32 94 145 1.150 3 140 454.0003.321 40 114 165 1.6

63 1 100 454.0001.322 25 74 132 1.063 2 120 454.0002.322 32 94 152 1.263 3 140 454.0003.322 40 114 172 1.563 4 160 454.0004.322 48 134 192 2.0

80 1 110 454.0001.323 25 84 150 1.980 2 120 454.0002.323 32 94 160 2.480 3 150 454.0003.323 40 114 190 2.680 4 170 454.0004.323 48 144 210 3.280 5 200 454.0005.323 63 184 240 4.0

100 1 110 454.0001.324 25 81 160 2.0100 2 120 454.0002.324 32 91 170 2.6100 3 150 454.0003.324 40 121 200 2.9100 4 170 454.0004.324 48 141 220 3.5100 5 200 454.0005.324 63 171 250 4.2

For coolant tubes see accessories page 7.12.


Chucks are balanced according to ISO 1940-1 G 6.3 at 12,000 min


Ref.no.

Design Note

Ref.no.


HSK-A

for Morse Tapers with ThreadReduction Sleeves

HSK

Hol

low

Tap

er S

hank

s

HSK-A MT A d1 l1 L g kg

50 1 100 458.0001.321 25 74 125 M 6 1.050 2 120 458.0002.321 32 94 145 M10 1.150 3 130 458.0003.321 40 104 155 M12 1.5

63 1 100 458.0001.322 25 74 132 M 6 1.063 2 120 458.0002.322 32 94 152 M10 1.263 3 130 458.0003.322 40 104 162 M12 1.463 4 160 458.0004.322 48 134 192 M16 2.0

80 1 120 458.0001.323 25 94 160 M 6 2.080 2 120 458.0002.323 32 94 160 M10 2.480 3 140 458.0003.323 40 104 180 M12 2.580 4 170 458.0004.323 48 144 210 M16 3.280 5 200 458.0005.323 63 184 240 M20 4.0

100 1 120 458.0001.324 25 91 170 M 6 2.1100 2 120 458.0002.324 32 91 170 M10 2.6100 3 140 458.0003.324 40 111 190 M12 2.7100 4 170 458.0004.324 48 141 220 M16 3.5100 5 200 458.0005.324 63 171 250 M20 4.2

For coolant tubes see accessories page 7.12.For further accessories such as retaining screws, keys or threaded rings see accessories from page 7.18 to page 7.19.

DesignPermissible concentricity deviation of hollow taper shank to inner taper 0.008 mm.Chucks are balanced according to ISO G 6.3 at 12,000 min

Standard SpecificationRetaining screw and threaded ring


Ref.no.Ref.no.

included.

Design Standard Specification Note


HSK-A

Drill Chucks

HSK

Hol

low

Tap

er S

hank

s

HSK-A Clampingrange

A D L kg

40 1 - 13 110 490.0001.320 43 130 0.8

50 1 - 13 100 490.0001.321 490.0101.321 43 125 1.3

63 1 - 13 102 490.0001.322 490.0101.322 43 134 2.063 2.5 - 16 122 490.0002.322 490.0102.322 56 154 2.5

80 1 - 13 109 490.0001.323 490.0101.323 43 149 2.780 2.5 - 16 129 490.0002.323 490.0102.323 56 169 3.2

100 1 - 13 109 490.0001.324 490.0101.324 43 159 3.0100 2.5 - 16 129 490.0002.324 490.0102.324 56 179 3.5


Ref.no.Version 1Version 1Ref.no. Ref.no.

Version 2Ref.no.

Version 2


HSK-A

Fine Boring Tools

HSK

Hol

low

Tap

er S

hank

s

HSK-A d1 A Boring range d2 l1 L kg

63 16 95 493.0011.322 3 - 88.1 55 70 127 1.5

100 16 100 493.0011.324 3 - 88.1 55 70 150 2.2

For coolant tubes see accessories page 7.12.For boring bars see accessories page 7.21.

For boring bars with a shank diameter of 16 mm. For precision boring with close tolerances and high surface finish quality in the 3 to 88.1 mm diameter range.

Use- Setting accuracy of 0.01 mm or 0.002 mm

using a vernier scale- Micrometer spindle with a large scale for

exact setting and easy reading- Minimum backlash- Variable overhang bar length positions - Internal coolant capability for chip clearance

Standard SpecificationBoring bars to be ordered separately.

Ref.no.

Ref.no.

Ref.no.

DesignUse Design Standard Specification


HSK-A

Basic HoldersTooling System KELCH FLEXIBORE

HSK

Hol

low

Tap

er S

hank

s

HSK-A d2 A l1 L kg

63 25 60 494.0001.322 34 92 0.963 32 70 494.0002.322 44 102 1.063 40 80 494.0003.322 54 112 1.263 50 80 494.0004.322 54 112 1.263 63 80 494.0005.322 54 112 1.3

100 25 70 494.0001.324 41 120 1.9100 32 80 494.0002.324 51 130 2.4100 40 80 494.0003.324 51 130 2.5100 50 80 494.0004.324 51 130 2.7100 63 80 494.0005.324 51 130 2.9100 100 100 494.0006.324 71 150 4.0

For coolant tubes see accessories page 7.12.For anti-fatigue bolts see accessories page 7.19.For allen keys see accessories page 7.19.

DesignPermissible concentricity deviation of hollow taper shank to location hole 0.005 mm.Permissible axial runout deviation of hollow taper shank to contact face 0.003 mm.

Anti-fatigue bolt and tightened driving dogs included.

NoteWhen screwing the FLEXIBORE modules together the coolant tube has to be removed.Other designs and sizes are available on request.

Ref.no.Ref.no.

Standard SpecificationDesign Standard Specification Note


HSK-AH

SKH

ollo

w T

aper

Sha

nks

Extensions

HSK-A d1 A ± 0.05 l1 L kg

50 50 80 706.0001.321 54 105 1.2

63 63 80 706.0001.322 54 112 1.6

80 80 120 706.0002.323 94 160 3.5

100 100 140 706.0001.324 111 190 6.5

For coolant tubes see accessories page 7.12.For clamping cartridges see accessories page 7.19.For cover rings see accessories page 7.20.

UseFor holding HSK tools according to ISO 12164-1/DIN 69 893-1 type A and C, d1 = nominal size HSK.


Standard SpecificationClamping cartridge and cover ring included.


Ref.no.Ref.no.

Use Design


Note


HSK-A

HSK

Hol

low

Tap

er S

hank

s

Reducers

HSK-A d1 A ± 0.05 l1 L kg

50 40 70 707.0003.321 44 95 0.9

63 40 80 707.0003.322 54 112 1.063 50 80 707.0004.322 54 112 1.2

80 50 80 707.0003.323 54 120 1.680 63 90 707.0004.323 64 130 1.8

100 50 80 707.0003.324 51 130 1.7100 63 100 707.0004.324 71 150 2.0100 80 100 707.0005.324 71 150 2.5

For coolant tubes see accessories page 7.12.For clamping cartridges see accessories page 7.19.For cover rings see accessories page 7.20.



Standard SpecificationClamping cartridge and cover ring included.


Ref.no.Ref.no.

Design


NoteUse


HSK-AH

SKH

ollo

w T

aper

Sha

nks

Tool Blanks

HSK-A d1 A L kg

40 40 20 517.0001.320 220 7.6

50 63 200 517.0001.321 225 8.1

63 80 250 517.0001.322 282 11.0

80 80 250 517.0001.323 290 16.4

100 95 250 517.0001.324 300 18.0


UseFor self-manufacturing special tools.

DesignTaper including flange hardened.Vickers hardness min. HV 670 kp/mm2

(min. HRC 58).

Taper ground, shank not ground, prepared to be finished, unhardened.

MaterialAlloyed case-hardened steel.

NoteThe dimensions quoted here for d1 are finished dimensions. Delivery with 0.5 mm allowance in the diameter.Other designs and sizes are available on request.

Ref.no.Ref.no.

Use

Design Material

Note


HSK-A

HSK

Hol

low

Tap

er S

hank

s

for Automatic Tool ChangingTest Arbors

HSK-A d1 A Effectivemeasuring length l1

l2 L kg

32 25 176 418.0001.319 150 160 192 1.4

40 25 180 418.0001.320 150 160 200 1.7

50 32 236 418.0001.321 200 210 261 2.1

63 40 346 418.0001.322 300 320 378 2.8

80 40 346 418.0001.323 300 320 386 3.1

100 40 349 418.0001.324 300 320 399 3.5

125 40 349 418.0001.325 300 320 412 4.0

160 40 400 418.0001.326 320 369 480 4.5


UseFor the acceptance test of machine tools in accordance with the ISO

Permissible concentricity deviation of hollow taper shank to cylindrical part

Standard SpecificationWith wooden stand for vertrical storage.

To prevent wrong measuring results caused by their weight, the test arbors are hollowed

The test arbors can also be used for DIN V 69 893 type E and F.

Ref.no.Ref.no.

d1 = 0.003 mm. out with a stepped bore from HSK 50.

Design Note

recommendation R 230.


NoteDesign

Use

HSK

Hol

low

Tap

er S

hank

s


ISO 12164-1/DIN 69 893-1 type C

Technical Data and Standard SpecificationHSK-C Tool Holders

HSK-C d2 d5H11

d16 l1- 0.2

l6JS10

f5- 0.1

b1 r3± 0.02

32 24 20.5 4 16 8.92 10 7.05 1.3840 30 25.5 4.5 20 11.42 10 8.05 1.8850 38 32 6 25 14.13 12.5 10.54 2.3863 48 40 7.5 32 18.13 12.5 12.54 2.8880 60 50 8.5 40 22.85 16 16.04 3.88

100 75 63 12 50 28.56 16 20.02 4.88

DesignHollow taper shank acc. to ISO 12164-1/DIN 69 893-1, type C without bore foridentification chip.

If there is no other specification:Hardened by means of a special low- distortion hardening process. Vickershardness 670 ± 40 HV 30 (HRC 58 ± 2).Hardness depth Eht = 0.3 - 0.6 mm.

Taper surface roughness indexRz ≤ 0.001 mm.

For details of concentricity of hollow tapershank to tool holder, refer to appropriate page of catalogue.

MaterialIf there is no other specification:Case-hardened alloy steel with a coretensile strength after hardening of min. 980 N/mm2.

NotePrices and delivery conditions are shown in the corresponding price list valid at the

Manufacturer reserves the right to maketechnical modifications. All dimensions in mm.

Tool holders can be used for central coolantsupply without any further provisions.

HSK-C

time in question.

Design

Material

Note

1. R

egis

terte

xt


i-tec® Shrink Fit ChucksStandard


Standard Versioni-tec®

HSK-C d1 A d2 d3 l1 g L V kg

40 6 70 311.0001.341 21 30 36 M 5 90 10 0.340 8 70 311.0002.341 21 30 36 M 6 90 10 0.340 10 70 311.0003.341 24 34 41 M 8 x 1 90 10 0.440 12 80 311.0004.341 24 35 47 M10 x 1 100 10 0.4

50 6 70 311.0001.342 21 30 36 M 5 95 10 0.550 8 70 311.0002.342 21 30 36 M 6 95 10 0.450 10 75 311.0003.342 24 33 41 M 8 x 1 100 10 0.550 12 80 311.0004.342 24 34 47 M10 x 1 105 10 0.550 14 80 311.0005.342 27 37 47 M10 x 1 105 10 0.650 16 85 311.0006.342 27 39 50 M12 x 1 110 10 0.6

63 6 70 311.0001.343 21 30 36 M 5 102 10 0.663 8 70 311.0002.343 21 30 36 M 6 102 10 0.663 10 75 311.0003.343 24 34 41 M 8 x 1 107 10 0.763 12 80 311.0004.343 24 34 47 M10 x 1 112 10 0.763 14 80 311.0005.343 27 36 47 M10 x 1 112 10 0.863 16 85 311.0006.343 27 36 50 M12 x 1 117 10 0.863 18 85 311.0007.343 33 44 50 M12 x 1 117 10 0.963 20 90 311.0008.343 33 45 52 M16 x 1 122 10 1.063 25 100 311.0009.343 44 53 58 M16 x 1 132 10 1.463 32 110 311.0010.343 44 53 62 M16 x 1 142 10 1.4

For adjusting screws see accessories page 7.13.

HSK

Hol

low

Tap

er S

hank

s

HSK-C


Ref.no.Ref.no.


HSK-CH

SKH

ollo

w T

aper

Sha

nks


DIN 69 882-5

HSK-C d1 A d2 l1 l2 g L d1tolerance

V kg

40 6 60 420.0151.341 25 36 50 M 5 80 + 0.005 10 0.340 8 60 420.0152.341 28 36 50 M 6 80 + 0.005 10 0.340 10 65 420.0153.341 35 40 55 M 8 85 + 0.005 10 0.540 12 70 420.0154.341 42 45 60 M10 90 + 0.005 10 0.640 14 70 420.0155.341 44 45 60 M10 90 + 0.005 10 0.740 16 75 420.0156.341 48 48 65 M12 95 + 0.005 10 0.8

50 6 60 420.0151.342 25 36 47.5 M 5 85 + 0.005 10 0.550 8 60 420.0152.342 28 36 47.5 M 6 85 + 0.005 10 0.550 10 65 420.0153.342 35 40 52.5 M 8 90 + 0.005 10 0.650 12 75 420.0154.342 42 45 62.5 M10 100 + 0.005 10 0.850 14 75 420.0155.342 44 45 62.5 M10 100 + 0.005 10 0.950 16 80 420.0156.342 48 48 67.5 M12 105 + 0.005 10 1.050 18 80 420.0157.342 50 48 67.5 M12 105 + 0.005 10 1.050 20 80 420.0158.342 52 50 67.5 M16 105 + 0.007 10 1.1

63 6 60 420.0151.343 25 36 47.5 M 5 92 + 0.005 10 0.763 8 60 420.0152.343 28 36 47.5 M 6 92 + 0.005 10 0.963 10 65 420.0153.343 35 40 52.5 M 8 97 + 0.005 10 1.063 12 75 420.0154.343 42 45 62.5 M10 107 + 0.005 10 1.263 14 75 420.0155.343 44 45 62.5 M10 107 + 0.005 10 1.263 16 80 420.0156.343 48 48 67.5 M12 112 + 0.005 10 1.763 18 80 420.0157.343 50 48 67.5 M12 112 + 0.005 10 1.863 20 80 420.0158.343 52 50 67.5 M16 112 + 0.007 10 2.063 25 95 420.0159.343 65 56 82.5 M20 127 + 0.007 10 2.463 32 100 420.0160.343 72 60 87.5 M20 132 + 0.007 10 2.9

80 6 65 420.0151.344 25 36 49 M 5 105 + 0.005 10 1.280 8 65 420.0152.344 28 36 49 M 6 105 + 0.005 10 1.280 10 70 420.0153.344 35 40 54 M 8 110 + 0.005 10 1.480 12 75 420.0154.344 42 45 59 M10 115 + 0.005 8 1.780 14 75 420.0155.344 44 45 59 M10 115 + 0.005 8 1.780 16 80 420.0156.344 48 48 64 M12 120 + 0.005 8 1.880 18 80 420.0157.344 50 48 64 M12 120 + 0.005 8 1.880 20 85 420.0158.344 52 50 69 M16 125 + 0.007 10 1.980 25 95 420.0159.344 65 56 79 M20 135 + 0.007 10 3.680 32 100 420.0160.344 72 60 84 M20 140 + 0.007 10 4.0

100 6 65 420.0151.345 25 36 49 M 5 115 + 0.005 10 1.3100 8 65 420.0152.345 28 36 49 M 6 115 + 0.005 10 1.3100 10 70 420.0153.345 35 40 54 M 8 120 + 0.005 10 1.5100 12 75 420.0154.345 42 45 59 M10 125 + 0.005 8 1.7100 14 75 420.0155.345 44 45 59 M10 125 + 0.005 8 1.7100 16 80 420.0156.345 48 48 64 M12 130 + 0.005 8 1.8100 18 80 420.0157.345 50 48 64 M12 130 + 0.005 8 1.9

Ref.no.Ref.no.


HSK-C

HSK

Hol

low

Tap

er S

hank

s

DIN 69 882-5


HSK-C d1 A d2 l1 l2 g L d1tolerance

V kg

100 20 85 420.0158.345 52 50 69 M16 135 + 0.007 10 2.0100 25 95 420.0159.345 65 56 79 M20 145 + 0.007 10 3.8100 32 100 420.0160.345 72 60 84 M20 150 + 0.007 10 4.3

For clamping screws see accessories page 7.16.For adjusting screws see accessories page 7.13.

Ref.no.Ref.no.


HSK-CH

SKH

ollo

w T

aper

Sha

nks


DIN 69 882-7

HSK-C d1 A d2 d3 d4 l1 l2 g V kg

40 6 60 702.0001.341 22 40 26 37.5 36.5 M 5 10 0.440 8 60 702.0002.341 24 40 28 37.5 37.5 M 6 10 0.440 10 65 702.0003.341 26 40 30 42.5 42.5 M 8 x 1 10 0.540 12 70 702.0004.341 28 40 32 47.5 48.5 M10 x 1 10 0.6

50 6 60 702.0001.342 22 50 26 37.5 29.5 M 5 10 0.750 8 60 702.0002.342 24 50 28 37.5 30.5 M 6 10 0.750 10 65 702.0003.342 26 50 30 42.5 35.5 M 8 x 1 10 0.750 12 75 702.0004.342 28 50 32 47.5 46.5 M10 x 1 10 0.850 14 75 702.0005.342 30 50 34 47.5 47.0 M10 x 1 10 0.850 16 80 702.0006.342 34 50 38 52.5 52.0 M12 x 1 10 0.850 18 80 702.0007.342 36 50 40 52.5 53.5 M12 x 1 10 1.550 20 80 702.0008.342 38 50 42 52.5 54.5 M16 x 1 10 1.2

63 6 60 702.0001.343 22 63 26 37.5 25.5 M 5 10 1.063 8 60 702.0002.343 24 63 28 37.5 26.5 M 6 10 1.063 10 65 702.0003.343 26 63 30 42.5 31.5 M 8 x 1 10 1.063 12 75 702.0004.343 28 63 32 47.5 42.5 M10 x 1 10 1.163 14 75 702.0005.343 30 63 34 47.5 43.5 M10 x 1 10 1.063 16 80 702.0006.343 34 63 38 52.5 49.5 M12 x 1 10 1.163 18 80 702.0007.343 36 63 40 52.5 50.0 M12 x 1 10 1.263 20 80 702.0008.343 38 63 42 52.5 50.5 M16 x 1 10 1.2

For adjusting screws see accessories page 7.15.For reduction bushes see accessories page 7.15.

Ref.no.Ref.no.


HSK-C

HSK

Hol

low

Tap

er S

hank

s

DIN 69 882-6

for ER/ESX ER-16 Collets with Internal ThreadCollet Chucks

HSK-C Clampingrange

A d1 D l1 g L V kg

40 0.5 - 10 60 698.0001.341 28 28 27 M10 80 5 0.5

For adjusting screws see accessories page 7.15.For further accessories such as collets, clamping nuts or clamping keys see accessories from page 7.3 to page 7.8.

Ref.no.Ref.no.


HSK-CH

SKH

ollo

w T

aper

Sha

nks

for ER/ESX ER-25/32 Collets with Internal ThreadCollet Chucks

DIN 69 882-6

HSK-C Clampingrange

A D l1 g L V kg

63 1 - 16 70 697.0003.343 42 36 M10 102 5 1.1

100 2 - 20 80 697.0001.345 50 40 M16 140 5 2.7

For adjusting screws see accessories page 7.15.For further accessories such as collets, clamping nuts or clamping keys see accessories from page 7.3 to page 7.8.


DesignPermissible concentricity deviation of hollow taper shank to inner taper: 0.003 mm.

Chucks are fine balanced without clamping nut according to ISO 1940-1 G 6.3 at 12,000 min Clamping nut balanced to G 6.3


NoteCollet chucks are equipped with internal thread for adjusting screws.Other designs and sizes are available on request.

Ref.no.Ref.no.

at 18,000 min

Use

DesignStandard Specification

Note


HSK-C

HSK

Hol

low

Tap

er S

hank

s

Extensions

HSK-C d1 A ± 0.05 L kg

40 40 60 706.0001.341 80 0.5

50 50 60 706.0001.342 85 1.1

63 63 80 706.0001.343 112 1.9

80 80 80 706.0001.344 120 3.4

100 100 100 706.0001.345 150 5.7

For clamping cartridges see accessories page 7.19.For cover rings see accessories page 7.20.



Standard SpecificationClamping cartridge and cover

Ref.no.Ref.no.

ring included .

Use Design Standard Specification


HSK-C

Reducers

HSK

Hol

low

Tap

er S

hank

s

HSK-C d1 A ± 0.05 l1 L kg

50 40 60 707.0003.342 47.5 85 0.8

63 40 60 707.0002.343 47.5 92 0.963 50 60 707.0003.343 47.5 92 1.0

80 50 80 707.0003.344 64 120 1.480 63 80 707.0004.344 64 120 2.0

100 50 80 707.0003.345 64 130 1.4100 63 80 707.0004.345 64 130 2.1100 80 100 707.0005.345 84 150 4.2

For clamping cartridges see accessories page 7.19.For cover rings see accessories page 7.20.

Ref.no.Ref.no.


HSK-C

for Manual Tool ChangingTest Arbors

HSK

Hol

low

Tap

er S

hank

s

HSK-C d1 A Effectivemeasuring length l1

l2 L kg

32 25 125 418.0001.340 110 115 141 0.5

40 25 125 418.0001.341 110 115 145 0.6

50 32 125 418.0001.342 107.5 112.5 150 0.8

63 40 160 418.0001.343 137.5 147.5 192 1.6

80 40 160 418.0001.344 130 140 200 1.8

100 40 160 418.0001.345 130 140 210 2.0

Ref.no.Ref.no.

For the acceptance test of machine tools in accordance with the ISO

Permissible concentricity deviation of hollow taper shank to cylindrical part

With wooden stand for vertrical storage.

To prevent wrong measuring results caused by their weight, the test arbors are hollowed

The test arbors can also be used for DIN V 69 893 type E and F.

d1 = 0.003 mm. out with a stepped bore from HSK 50.

recommendation R 230.


NoteDesign

UseUse

Design Note



DIN V 69 893-5 type E

Technical Data and Standard SpecificationHSK-E Tool Holders

HSK-E d1h10

d2 d4max

d5- 0.1

d6- 0.1

f1- 0.1

f2min

f3± 0.1

l1- 0.2

l4JS10

25 25 19 20 22 28.5 10 20 4.5 13 7.2132 32 24 26 26.5 37 20 35 16 16 8.9240 40 30 34 34.8 45 20 35 16 20 11.4250 50 38 42 43 59.3 26 42 18 25 14.1363 63 48 53 55 72.3 26 42 18 32 18.13

DesignHollow taper shank DIN V 69 893-5 1996-01, type E without bore for

If there is no other specification:Hardened by means of a special low- distortion hardening process. Vickershardness 670 ± 40 HV 30 (HRC 58 ± 2).Hardness depth Eht = 0.3 - 0.6 mm.


For details of concentricity of hollow tapershank to tool holder, refer to appropriate page of catalogue.

MaterialIf there is no other specification:Case-hardened alloy steel with a coretensile strength after case hardening of min. 980 N/mm 2.

NotePrices and delivery conditions are shown in the corresponding price list valid at the time

Manufacturer reserves the right to maketechnical modifications. All dimensions in mm.

Coolant tube for tool holders has to be ordered separately. It prevents coolant from flowing back into machine spindles or theclamping mechanism.

HSK-EH

SKH

ollo

w T

aper

Sha

nks

identification chip. in question.

Design

Material

Note


HSK-E



HSK

Hol

low

Tap

er S

hank

s

HSK-E d1 A d2 d3 l1 g L V kg

32 3 65 311.0011.361 12 17 - - 81 - 0.232 4 65 311.0012.361 12 17 - - 81 - 0.232 5 65 311.0013.361 12 17 - - 81 - 0.232 6 70 311.0003.361 21 26 36 M 5 86 10 0.432 8 70 311.0004.361 21 26 36 M 6 86 10 0.432 10 70 311.0005.361 24 30 41 M 8 x 1 86 10 0.4

40 3 65 311.0011.362 12 17 - - 85 - 0.340 4 65 311.0012.362 12 17 - - 85 - 0.340 5 65 311.0013.362 12 17 - - 85 - 0.340 6 80 311.0001.362 21 31 36 M 5 100 10 0.440 8 80 311.0002.362 21 31 36 M 6 100 10 0.440 10 80 311.0003.362 24 34 41 M 8 x 1 100 10 0.640 12 90 311.0004.362 24 35 47 M10 x 1 110 10 0.6

50 3 65 311.0011.363 12 17 - - 90 - 0.550 4 65 311.0012.363 12 17 - - 90 - 0.550 5 65 311.0013.363 12 17 - - 90 - 0.550 6 80 311.0001.363 21 30 36 M 5 105 10 0.650 8 80 311.0002.363 21 30 36 M 6 105 10 0.650 10 85 311.0003.363 24 33 41 M 8 x 1 110 10 0.750 12 90 311.0004.363 24 34 47 M10 x 1 115 10 0.750 14 90 311.0005.363 27 37 47 M10 x 1 115 10 0.850 16 95 311.0006.363 27 38 50 M12 x 1 120 10 0.8

63 3 80 311.0011.364 12 17 - - 112 - 0.663 4 80 311.0012.364 12 17 - - 112 - 0.663 5 80 311.0013.364 12 17 - - 112 - 0.663 6 80 311.0001.364 21 30 36 M 5 112 10 0.763 8 80 311.0002.364 21 30 36 M 6 112 10 0.763 10 85 311.0003.364 24 33 41 M 8 x 1 117 10 0.863 12 90 311.0004.364 24 34 47 M10 x 1 122 10 0.863 14 90 311.0005.364 27 37 47 M10 x 1 122 10 0.963 16 95 311.0006.364 27 38 50 M12 x 1 127 10 0.9


Ref.no.Ref.no.


HSK-E


Extremely Slim Versioni-tec® Shrink Fit Chucks

HSK

Hol

low

Tap

er S

hank

s

HSK-E d1 A d2 d3 L kg

40 3 70 311.0411.362 8 12.4 90 0.340 3 120 311.0412.362 8 16.8 140 0.340 4 70 311.0414.362 9 13.4 90 0.340 4 120 311.0415.362 9 17.8 140 0.340 5 70 311.0417.362 10 14.4 90 0.340 5 120 311.0418.362 10 18.4 140 0.340 6 70 311.0401.362 11 15.4 90 0.340 6 120 311.0431.362 11 19.4 140 0.440 8 70 311.0402.362 13 17.4 90 0.340 8 120 311.0432.362 13 21.4 140 0.440 10 70 311.0403.362 15 19.4 90 0.340 10 120 311.0433.362 15 23.4 140 0.440 12 70 311.0404.362 17 21.4 90 0.340 12 120 311.0434.362 17 25.4 140 0.5


DesignPermissible concentricity deviation of hollow taper shank to location hole d1 = 0.003 mm (measured at 3 x D cantilever length).

Chucks are fine balanced accord to ISO 1940-1 G 2.5 at 25,000 min

.The clamping diameter is designed for a shank tolerance of h6.

NoteSlim design with an outer chamfer of 2°30‘.Other designs and sizes are available on request.

Ref.no.Ref.no.

NoteDesign


HSK-E



HSK

Hol

low

Tap

er S

hank

s

HSK-E d1 A d2 l1 l2 L d1tolerance

kg

50 6 65 420.0001.363 25 35 39 90 + 0.005 0.750 8 65 420.0002.363 28 35 39 90 + 0.005 0.850 10 65 420.0003.363 35 39 39 90 + 0.005 0.850 12 80 420.0004.363 42 44 54 105 + 0.005 0.950 16 80 420.0006.363 48 47 54 105 + 0.005 1.050 18 80 420.0007.363 50 47 54 105 + 0.005 1.050 20 80 420.0008.363 52 49 54 105 + 0.007 1.0

63 6 65 420.0001.364 25 35 39 97 + 0.005 0.863 8 65 420.0002.364 28 35 39 97 + 0.005 0.863 10 65 420.0003.364 35 39 39 97 + 0.005 0.963 12 80 420.0004.364 42 44 54 112 + 0.005 1.263 14 80 420.0005.364 44 44 54 112 + 0.005 1.263 16 80 420.0006.364 48 47 54 112 + 0.005 1.363 20 80 420.0008.364 52 49 54 112 + 0.007 1.463 25 110 420.0009.364 65 54 84 142 + 0.007 2.363 32 110 420.0010.364 72 58 84 142 + 0.007 2.5


UseFor holding shank tools with lateral driving surface, DIN 1835 type B and DIN 6535type HB.

DesignPermissible concentricity deviation of hollow taper shank to location hole d1 = 0.003 mm.

Chucks are fine balanced according to ISO 1940-1 G 6.3 at 12,000 min

Standard SpecificationClamping screw included.From location hole d1 = 25 mm 2 clamping screws are included.

NoteFor an increased machining accuracy the bore tolerance is much reduced compared to DIN 1835. Other designs and sizes are available on request.

Ref.no.Ref.no.

Use

DesignDesign

Note



HSK-E



HSK

Hol

low

Tap

er S

hank

s

HSK-E d1 A d2 l1 l2 g L d1tolerance

V kg

63 10 80 420.0153.364 35 41 54 M 8 112 + 0.005 10 1.063 12 90 420.0154.364 42 47 64 M10 122 + 0.005 10 1.363 16 100 420.0156.364 48 50 74 M12 132 + 0.005 10 1.663 25 110 420.0159.364 65 58 84 M20 142 + 0.007 10 2.2


UseFor holding shank tools with inclined clamping surface (2°), DIN 1835 type E and DIN 6535 type HE.

DesignPermissible concentricity deviation of hollow taper shank to location hole d1 = 0.003 mm.

Chucks are fine balanced according to ISO 1940-1 G 6.3 at 12,000 min

Standard SpecificationClamping screw included.From location hole d1 = 25 mm 2 clamping screws are included.

NoteFor an increased machining accuracy the bore tolerance is much reduced compared to DIN 1835. Bored through adjusting screw for coolant. Other designs and sizes are available on request.

Ref.no.Ref.no.

Use

Design


Note


HSK-E



HSK

Hol

low

Tap

er S

hank

s

HSK-E d1 A d2 d3 d4 l1 l2 g V kg

40 6 70 702.0001.362 22 34 26 37.5 36.5 M 5 10 0.640 8 70 702.0002.362 24 34 28 37.5 37.5 M 6 10 0.640 10 75 702.0003.362 26 34 30 42.5 42.5 M 8 x 1 10 0.640 12 80 702.0004.362 28 34 32 47.5 47.5 M10 x 1 10 0.6

50 6 70 702.0001.363 22 40 26 37.5 26.5 M 5 10 0.850 8 70 702.0002.363 24 40 28 37.5 27.5 M 6 10 0.850 10 75 702.0003.363 26 40 30 42.5 32.5 M 8 x 1 10 0.850 12 80 702.0004.363 28 40 32 47.5 43.5 M10 x 1 10 0.850 16 90 702.0006.363 34 53 40 52.5 29.5 M12 x 1 10 1.150 20 90 702.0008.363 38 60 42 52.5 29.5 M16 x 1 10 1.1

For coolant tubes see accessories page 7.12.For adjusting screws see accessories page 7.15.For reduction bushes see accessories page 7.15.

UseFor shank tools according to DIN 1835 type A and B or DIN 6535 type HA and HB. Shanks according to DIN 6535 type HE are only applicable with reduction bushes.

Shank quality h6, Ra min = 0.3.

DesignChucks are fine balanced according to ISO G 6.3 at 12,000 min

Standard SpecificationBored-through adjusting screw included.


Use

Design


Note

Ref.no.Ref.no.


HSK-E


for ER/ESX ER-11/16 Collets with Internal ThreadCollet Chucks

HSK

Hol

low

Tap

er S

hank

s

HSK-E Clampingrange

A d2 D l2 g L V kg

40 0.5 - 7 60 698.0011.362 18.5 19 18 M 6 80 5 0.340 0.5 - 10 60 698.0001.362 28 28 27 M10 80 5 0.4

50 0.5 - 10 100 698.0001.363 28 28 27 M10 125 10 0.6




Chucks are fine balanced without clamping nut according to ISO 1940-1 G 6.3 at 12,000 min Clamping nut balanced to G 6,3



Ref.no.Ref.no.

at 18,000 min

Note

Standard SpecificationDesign

Use


HSK-E



HSK

Hol

low

Tap

er S

hank

s

HSK-E Clampingrange

A d2 D l2 L kg

40 0.5 - 7 60 698.0211.362 18.5 19 42 80 0.340 0.5 - 10 60 698.0201.362 28 28 40 80 0.4

50 0.5 - 10 100 698.0201.363 28 28 70 125 0.6


UseFor clamping tools with straight shank according to DIN ISO 15488 (DIN 6499) type A and B.


Chucks are fine balanced withoutclamping nut according to ISO 1940-1 G 2.5 at 25,000 min Clamping nut fine balanced according to



Ref.no.Ref.no.

ISO 1940-1 G 2.5 at 25,000 min

Use


Note


HSK-E


for ER/ESX ER-25/32 with Internal ThreadCollet Chucks

HSK

Hol

low

Tap

er S

hank

s

HSK-E Clampingrange

A D l1 g L V kg

40 1 - 16 80 697.0001.362 42 36 M10 100 10 0.5

50 1 - 16 80 697.0002.363 42 36 M10 105 10 1.150 2 - 20 100 697.0001.363 50 40 M16 125 10 1.2




Chucks are fine balanced without clamping nut according to ISO 1940-1G 6.3 at 12,000 min Clamping nut fine balanced according to



HSK-E

Ref.no.Ref.no.

G 6.3 at 18,000 min

Use


Note


HSK-E



HSK

Hol

low

Tap

er S

hank

s

HSK-E Clampingrange

A D l1 L kg

40 1 - 16 80 697.0201.362 42 36 100 0.5

50 1 - 16 100 697.0204.363 42 36 125 1.250 2 - 20 100 697.0201.363 50 40 125 1.2

For coolant tubes see accesories page 7.12.For further accessories such as collets, clamping nuts or clamping keys see accessories from page 7.3 to page 7.8.



Chucks are fine balanced without clamping nut according to ISO 1940-1 G 2.5 at 25,000 min Clamping nut fine balanced according to

Standard SpecificationCollet chuck inluding clamping nut.


Ref.no.Ref.no.

ISO 1940-1 G 2.5 at 25,000 min

Use


Note


HSK-E



HSK

Hol

low

Tap

er S

hank

s

HSK-E d1 A d2 l3 l4 L A1 kg

50 16 50 489.0001.363 32 17 27 92 40 0.750 22 50 489.0002.363 40 19 31 94 38 0.850 27 65 489.0003.363 48 21 33 111 53 1.050 32 65 489.0004.363 58 24 38 114 51 1.2

For coolant tubes see accessories page 7.12.For further accessories such as cutter retaining screws, keys, feather keys or drive rings see accessories from page 7.16 to page 7.17.

UseFor clamping tools with straight shank according to DIN 6499 type A and B.


Chucks are fine balanced according to ISO 1940-1 G 2.5 at 25,000 minCutter drive according to DIN 138.

Standard SpecificationCutter retaining screw, feather key with withdrawal thread and drive ring included.


Ref.no.Ref.no.

Use


Note


HSK-E

Fine Boring Tools

HSK

Hol

low

Tap

er S

hank

s

HSK-E d1 A Boring Range d2 l1 L kg

40 16 85 493.0011.362 3 - 88.1 55 68 105 0.9

50 16 90 493.0011.363 3 - 88.1 55 68 115 1.2

For coolant tubes see accessories page 7.12.For boring bars see accessories page 7.21.

UseFor boring bars with a shank diameter of 16 mm. For precision boring with close tolerances and high surface finish qualityin the 3 to 88.1 mm diameter range.

Design- Setting accuracy of 0.01 mm or 0.002 mm

using a vernier scale- Micrometer spindle with a large scale for

exact setting and easy reading- Minimum backlash- Variable overhang bar length positions- Internal coolant capability for chip clearance

Standard SpecificationBoring bars to be ordered separately.

Ref.no.Ref.no.

Use Design Standard Specification


DIN V 69 893-6 type F

Technical Data and Standard SpecificationHSK-F Tool Holders

HSK-F d1h10

d2 d4max

d5- 0.1

d6- 0.1

f1- 0.1

f2min

f3± 0.1

l1- 0.2

l4JS10

50 50 30 42 43 59.3 26 42 18 20 11.4263 63 38 53 55 72.3 26 42 18 25 14.13

DesignHollow taper shank accord to DIN V 69 893-6 1996-01, type F

If there is no other specification:Hardened by means of a special low- distortion hardening process. Vickers hardness 670 ± 40 HV 30 (HRC 58 ± 2).Hardness depth Eht = 0.3 - 0.6 mm.


For details of concentricity of hollow tapershank to tool holder, refer to appropriate page of the catalogue.

MaterialIf there is no other specification:Case-hardened alloy steel with a coretensile strength after case hardening of min. 980 N/mm

Standard SpecificationPrices and delivery conditions are shown in the corresponding price list valid at the time in question.

Manufacturer reserves the right to make technicalmodifications. All dimensions in mm.

Coolant tube for tool holders has to be ordered separately. It prevents coolant fromflowing back into machine spindles or theclamping mechanism.

HSK-FH

SKH

ollo

w T

aper

Sha

nks

without bore for identification chip.

Design

Material



HSK-F



HSK

Hol

low

Tap

er s

hank

s

HSK-F d1 A d2 d3 l1 g L V kg

63 3 80 311.0011.371 12 17 - - 105 - 0.763 4 80 311.0014.371 12 17 - - 105 - 0.763 5 80 311.0017.371 12 17 - - 105 - 0.763 6 80 311.0001.371 21 30 36 M 5 105 10 0.963 8 80 311.0002.371 21 30 36 M 6 105 10 0.963 10 85 311.0003.371 24 33 41 M 8 x 1 110 10 0.963 12 90 311.0004.371 24 34 47 M10 x 1 115 10 1.063 16 95 311.0006.371 27 38 50 M12 x 1 120 10 1.163 20 100 311.0008.371 33 45 52 M16 x 1 125 10 1.2


DesignPermissible concentricity deviation of hollow taper shank to location hole d1 = 0.003 mm (measured at 3 x D cantilever length).Chucks are fine balanced according to ISO 1940-1 G 2.5 at 25,000 min

The clamping diameter is designed for ashank tolerance of h6.

Standard SpecificationAdjusting screw for length adjustment(from Ø 6) not included.


Ref.no.Ref.no.

Design


Note


HSK-F


for ER/ESX ER-16 with Internal ThreadCollet Chucks

HSK

Hol

low

Tap

er S

hank

s

HSK-F Clampingrange

A d1 d2 D l1 l2 g L V kg

63 0.5 - 10 100 698.0001.371 - 28 28 - 27 M10 125 10 1.063 0.5 - 10 160 698.0002.371 46 28 28 85 27 M10 185 10 1.7




Chucks are fine balanced without clamping nut according to DIN 1940-1G 2.5 at 25,000 min Clamping nut balanced according to



Ref.no.Ref.no.

ISO 1940-1 G 2.5 at 25,000 min

Use


Note


HSK-F

for ER/ESX ER-32/40 with Internal ThreadCollet Chucks


HSK

Hol

low

Tap

er S

hank

s

HSK-F Clampingrange

A D l1 g L V kg

63 2 - 20 100 697.0001.371 50 40 M16 125 10 1.163 3 - 26 120 697.0002.371 63 58 M16 145 10 1.6




Chucks are fine balanced without clamping nut according to ISO 1940-1G 2.5 at 25,000 min Clamping nut balanced according to



Ref.no.Ref.no.

ISO 1940-1 G 2.5 at 25,000 min

Use

Design

Note



HSK-F

DIN 69 882-3


HSK

Hol

low

Tap

er S

hank

s

HSK-F d1 A d2 l3 L kg

63 16 50 579.0001.371 32 17 92 0.963 22 50 579.0002.371 40 19 94 1.1

For coolant tubes see accessories page 7.12.For further accessories such as cutter retaining screws, keys or drive keys see accessories from page 7.16 to page 7.18.

UseFor clamping shell end mills and millingcutters with longitudinal slot or tenon drive.


clamping nut according to ISO 1940-1 G 2.5 at 25,000 min


NoteOther designs and styles are available on request.Clamping nut balanced according to

Chucks are fine balanced without

ISO 1940-1 G 2.5 at 25,000 min

Use

Design


Note

Ref.no.Ref.no.

www.kelchgmbh.de

As of September 2010 · Technical and design modi�cations are subject to change without notice.

0720

7, 0

5/20

11

Prod

uct C

atal

goue

201

0/11

· Pre

cisi

on T

ools

Product Catalogue 2010/11 Precision Tools

HSK Tool Holders · Tool Holders with Polygonal ShankTool Holders with Steep Taper · FLEXIBORE

Tool Holders with Straight Shank · Shrinking Devices · Accessories

Germany(Headquarters)Kelch GmbHWerkstr. 30D-71384 Weinstadt Tel.: +49 (0) 71 51 / 2 05 22 -0 Fax: +49 (0) 71 51 / 2 05 22 [email protected]

EnglandKELCH UK Ltd.Unit 4 Cygnet DriveSwan Valley Business ParkGB-Northampton NN4 9BSTel.: +44 1604 58 38 00Fax: +44 1604 58 38 [email protected]

SwitzerlandKELCH AGWeihermattstr. 14CH-6260 ReidenTel.: +41 62 7 58 51-26Fax: +41 62 7 58 [email protected]

ChinaHarbin Measuring &Cutting Tool Group Co., Ltd.44 Heping RoadHarbin China 150040Tel.: +86 451 82 64 18 36Fax: +86 451 82 62 35 55www.links-china.com

USAKELCH Inc.1574 Barclay Blvd.Bu�alo Grove IL 60089Tel.: +1 847 4 59-96 00Fax: +1 847 4 59-96 [email protected]

HSK Tool Holders · HSK Tool Holders Germany (Headquarters) ... HSK F - DIN V 69 893-6 Test Arbors...

Documents

Transcript of HSK Tool Holders · HSK Tool Holders Germany (Headquarters) ... HSK F - DIN V 69 893-6 Test Arbors...