HSDPA Acces Problem
Click here to load reader
-
Upload
ouzennou-assou -
Category
Documents
-
view
213 -
download
0
Transcript of HSDPA Acces Problem
7/29/2019 HSDPA Acces Problem
http://slidepdf.com/reader/full/hsdpa-acces-problem 1/7
Cannot deliver data via HSDPA
Phenomenon Description
User’s data cannot be delivered via HSDPA. RSCP/EcNo is good.
HSDPA Payload is low. Only deliver 20Mbps. IUB type is hybrid E1 (E1 ) and IP radio (faulty ) Engineer Name Girindra Wardhana Date : 31 December 2012
SITE NAME MASJIDJAMIALMAKMURMW
KPI
CS
PS
7/29/2019 HSDPA Acces Problem
http://slidepdf.com/reader/full/hsdpa-acces-problem 2/7
HS
Transport Hybrid E1 ( 4 E1 ) and IP radio (faulty)
ParameterHandling LST ADJNODEADJNODE
Function Descript ion:
This section describes the parameters related to ADJNODE.
Related Comm ands
MML Command MML Description
ADD ADJNODE Add Adjacent Node
MOD ADJNODE Modify Adjacent Node
RMV ADJNODE Remove Adjacent Node
7/29/2019 HSDPA Acces Problem
http://slidepdf.com/reader/full/hsdpa-acces-problem 3/7
LST ADJNODE List Adjacent Node
Parameter Descript ion:
Parameter ID Parameter Description
ANI Adjacent Node ID
NAME Adjacent Node Name
NODEBID NodeB ID
SGSNFLG SGSN FLAG
DPX DPX Index
UPPERANI Upper Ani
SRN Subrack No.
SN Slot No.
SAALLNKN SAAL link No.
QAAL2VER Qaal2 Protocol Version
DSP IPPATH
Display IP Path State DSP IPPATH
Function
Note
Parameter
Example
Output Description
7/29/2019 HSDPA Acces Problem
http://slidepdf.com/reader/full/hsdpa-acces-problem 4/7
Related Command
Function
Use this command to display the status of IP Path.
Note None
Parameter
ID Name Description
PATHID IP Path ID
IP Path ID
Value Range:0~65535
default value:None
Example
Declaration:
The following message is intended for your reference only. Upon any inconsistence between the
message and the returned result caused by the running environment of the product or versiondifference, use the returned result.
Display the status of IP PATH.
+++ HW-Airbridge 2006-10-25 09:28:04
O&M #1642
%%DSP IPPATH:;%%
RETCODE = 0 Succeed.
IP Path Link Status
-------------------
IP Path ID = 1
Link Status = Abnormal
(Number of results = 1)
--- END
Output Description
Output description for display the IP Path Status:
Field Meaning
7/29/2019 HSDPA Acces Problem
http://slidepdf.com/reader/full/hsdpa-acces-problem 5/7
IP Path ID IP Path ID
Link Status IP path status.Value range: Normal, Abnormal
Related Command ADD IPPATH RMV IPPATH LST IPPATH
Discrepancy
check
LST ADJNODE:LSTTYPE=BYID,ANI=449;
DSP IPPATH:ANI=449;
PING IP
RMV IPPATH
ADD IPPATH
Resolving
Action
With LST ADJNODE, we can see the status of IUB, both of E1 and IP. E1 ‘s condition is good while IP is
down. IP Path Check Flag was disable and the IPPATH’s status are available. This condition lead the dat
still be pushed to be delivered via IP even the IP link is faulty. That’s why, user’s handset able to camp i
HSDPA but cannot deliver data.
After re-enabling IPPath-check-flag by delete create IPPath, IP’s status can be read as “down” , and all
HSDPA data is delivered via E1.
7/29/2019 HSDPA Acces Problem
http://slidepdf.com/reader/full/hsdpa-acces-problem 6/7
Trafficability
KPI AFTER
PS
7/29/2019 HSDPA Acces Problem
http://slidepdf.com/reader/full/hsdpa-acces-problem 7/7
HS