HS-420 Series V ibr ation Sensor - Home | AE …...HS-420 Series V ibr ation Sensor Fr equency...
Transcript of HS-420 Series V ibr ation Sensor - Home | AE …...HS-420 Series V ibr ation Sensor Fr equency...
Tel: +44(0) 845 680 1957Fax: +44(0) 845 680 1958Email: [email protected]: www.hansfordsensors.com
Operating Temperature RangeSealingMaximum ShockEmissionsImmunity
-25 to 90 ºCIP675000 gEN61000-6-4:2007EN61000-6-2:2005
Case MaterialSensing Element/ConstructionMounting TorqueWeightMating connector/Cable Assembly
Mounting ThreadsOptions
Stainless SteelPZT/Compression8 Nm150 gms (nom)M12 - Straight or Right Angle.Requires screened cable assemblySee 'How to order' table Ranges, filters, mating cable assemblies,intrinsically safe,
Mounted Base ResonanceVelocity Ranges
Frequency ResponseIsolationMeasurement RangeTransverse SensitivityElectrical
5 kHz min.0-10 to 0-100 mm/sec RMS ±10%Nominal 80 Hz at 22°C10 Hz to 1 kHz ±5 % - ISO10816Base isolated50 g peakLess than 5%
Typical Applications
Low cost online means of monitoringwith the capability of interfacing directinto PLC, BMS or any 4-20mA inputmodule.Proven use in vibration monitoringfor off-line applications using commerciallyavailable data collectors.
Protecting...Fans, Motors, Pumps, Compressors,Centrifuges, Conveyers, Air Handlers,Gearboxes, Rolls, Dryers, Presses,Cooling, HVAC, Spindles, Machine Tooling,Process Equipment and many more.
HS-420 Series Vibration SensorM12 Connector, 4-20mA Velocity Transducer for PLC Interface
Technical Performance
Environmental
Mechanical
Output CurrentSupply VoltageSettling TimeOutput ImpedanceCase Isolation
4-20 mA DC proportional to RMS velocity (mm/s)15 - 30 Volts DC (for 4-20 mA)2 secondsLoop Resistance 600 Ohms max. at 24 Volts>10 Ohms at 500 Volts8
HS-420 Series Vibration Sensor
Frequency Response
Tel: +44(0) 845 680 1957Fax: +44(0) 845 680 1958Email: [email protected]: www.hansfordsensors.com
Ref: HS-420-M12-1111
Mounting of sensor to achieve good repeatable readings.Vibration sensor should be firmly fixed to a flat surface (spotface surface may be needed to be produced and cable anchoredto sensor body.)
TS029 Iss05
How to order
Please contact our Sales Office for information on sensor accessories (mounting studs, etc) and multichannel switch boxes.
We reserve the right to alter the specification of this product without prior notice.
Pin 2(white)
Pin 4(black)
Dimensions