HPLC - shin-han.com HPLC c… · · 2017-01-08800-865-4100 or Int’l 847-467-4056 for details....
-
Upload
truongdung -
Category
Documents
-
view
213 -
download
0
Transcript of HPLC - shin-han.com HPLC c… · · 2017-01-08800-865-4100 or Int’l 847-467-4056 for details....
HPLC Columns
“Designed by Chromatographers” ™
1801 Maple Ave.Evanston, IL 60201 U.S.A.800-865-4100 800-293-5059 (fax)847-467-4056 (int’l)847-467-4057 (int’l fax)[email protected]
Available Sizes5 cm – 140 cm internal diameter (I.D.)Up to 2 meter lengthCustom designed and built to order at our U.S. manufacturing facilities. Call us at800-865-4100 or Int’l 847-467-4056 for details.
Adjustable Bed Columns• Lower cost adjustable bed static compression columns and guard columns
also available.
Materials of ConstructionPharmaceutical and biotech grade only.• 316L stainless steel for all parts of the column including legs, frames and
internal parts such as frits.• Salt resistant passivated 316L stainless steel or Hastelloy available.• All seals made of FDA approved elastomers; eg., PTFE, FEP, Viton.• Sanitary design with minimized dead volumes and boroscopically examined
orbital piping welds.
Code Compliant DesignFDA, ASME and ASME-BPE regulatory code requirements
ValidationFor IQ/OQ submissionsAll column parts are fully traceable with individual PIN stamping and certificatesof analysis. Detailed operation manual includes all cut sheets for componentsand column test reports (including ASME).
DeliveryFastest in the IndustryFast delivery times and available inventory enables us to meet your purificationneeds quickly and on time.
Warranty and Support• One year extendable warranty • Rapid response time for technical service and support
HPLCColumns
Copyright © 2006, TechniKrom, Inc.
• Dynamic axial compression for rapid and reproducible packing of any media
• Up to 3000 PSI
• Active flow distribution for better plate count (N) and resolution than any other column design
• Dynamic AxialCompressionFast, easy reproducible packing
Easy to Use, Portable and Versatile.
180° Rotation in frame
Up to 25 cmID on frame
• Portability
The highest performance possible.
30cm - 140cmID on legs(unit shown withouthydraulic cart)
• Active Flow DistributorLow Shear/Low Dead Volume/Highest Performance
• Unique Frit DesignNo liquid nitrogen chilling required for removal
• Performance— Generates highest N (theoretical
plate count) possible— Permits formation of full range of
bed lengths— Dynamic Axial Compression
eliminates voids and channels during operation
Fill
UnpackReady To Use
• Supports All Process LC MediaTypes: Reverse phase, normal phase, chiral, irregular, spherical etc.
N * dP media type
40,000. + 10µm spherical silica
30,000. + 15µm spherical mono-sized DVB resin
20,000. + 20µm spherical silica
*N values achieved by end-users for different applications
PistonPack
• Scale-Up GuaranteedUniform flow distribution guarantees perfect scaling from 5 cm to 1.4 m I.D.
• Hoist Free Operation— Designed for use in clean rooms— Hoist free frit and seal maintenance and replacement
• Dynamic AxialCompressionFast, easy reproducible packing
Easy to Use, Portable and Versatile.
180° Rotation in frame
Up to 25 cmID on frame
• Portability
The highest performance possible.
30cm - 140cmID on legs(unit shown withouthydraulic cart)
• Active Flow DistributorLow Shear/Low Dead Volume/Highest Performance
• Unique Frit DesignNo liquid nitrogen chilling required for removal
• Performance— Generates highest N (theoretical
plate count) possible— Permits formation of full range of
bed lengths— Dynamic Axial Compression
eliminates voids and channels during operation
Fill
UnpackReady To Use
• Supports All Process LC MediaTypes: Reverse phase, normal phase, chiral, irregular, spherical etc.
N * dP media type
40,000. + 10µm spherical silica
30,000. + 15µm spherical mono-sized DVB resin
20,000. + 20µm spherical silica
*N values achieved by end-users for different applications
PistonPack
• Scale-Up GuaranteedUniform flow distribution guarantees perfect scaling from 5 cm to 1.4 m I.D.
• Hoist Free Operation— Designed for use in clean rooms— Hoist free frit and seal maintenance and replacement
HPLC Columns
“Designed by Chromatographers” ™
1801 Maple Ave.Evanston, IL 60201 U.S.A.800-865-4100 800-293-5059 (fax)847-467-4056 (int’l)847-467-4057 (int’l fax)[email protected]
Available Sizes5 cm – 140 cm internal diameter (I.D.)Up to 2 meter lengthCustom designed and built to order at our U.S. manufacturing facilities. Call us at800-865-4100 or Int’l 847-467-4056 for details.
Adjustable Bed Columns• Lower cost adjustable bed static compression columns and guard columns
also available.
Materials of ConstructionPharmaceutical and biotech grade only.• 316L stainless steel for all parts of the column including legs, frames and
internal parts such as frits.• Salt resistant passivated 316L stainless steel or Hastelloy available.• All seals made of FDA approved elastomers; eg., PTFE, FEP, Viton.• Sanitary design with minimized dead volumes and boroscopically examined
orbital piping welds.
Code Compliant DesignFDA, ASME and ASME-BPE regulatory code requirements
ValidationFor IQ/OQ submissionsAll column parts are fully traceable with individual PIN stamping and certificatesof analysis. Detailed operation manual includes all cut sheets for componentsand column test reports (including ASME).
DeliveryFastest in the IndustryFast delivery times and available inventory enables us to meet your purificationneeds quickly and on time.
Warranty and Support• One year extendable warranty • Rapid response time for technical service and support
HPLCColumns
Copyright © 2006, TechniKrom, Inc.
• Dynamic axial compression for rapid and reproducible packing of any media
• Up to 3000 PSI
• Active flow distribution for better plate count (N) and resolution than any other column design