HPC T1 2011 Mechanical Drive Components GB
Transcript of HPC T1 2011 Mechanical Drive Components GB
Prices not up-to-dates, contact us
p.24 p.28 p.32 p.34
p.36 p.37 p.38 p.42
p.44 p.46 p.47 p.48
p.56 p.61 p.68 p.70
p.74 p.76 p.78 p.80
p.82 p.84 p.86 p.87
Clamping pinLifting pin
Clamping pin with T handle
Short clampingpin
Spring loadedposition switch
Spring loadedplunger
Spring plunger Locating boltsupport bracket
Locking bolt Lever operatedlocking bolt
Ring operatedlocking bolt
Handwheel withhandle
Spoked handwheel Handle Arm
Knurled knob Valve wheel Wing knob Small 6 lobe femalehandle
Threaded sphericalknob
Knurled thumbscrew
Headed thumbscrew
Fast-locking knurlednut
Increasedstock
New
New
New
NewClamping pin for sheets
Image index 1/2
Stainlesssteel
StainlesssteelStainlesssteel
Turn the pageplease
Discounts : maximum discount on price list 2010Stock : depending on availabilityNew : new product
p.89 p.90 p.92 p.98
p.102 p.116
p.118 p.121 p.122
p.126
New
p.130 p.138 p.142
p.146 p.150 p.154
p.167 p.180 p.188
Mushroom headedbutton
Lever Indexing handle Cam lever
Latch clamp withcatch-plate
Vertical toogleclamp
Horizontal toogleclamp
p.100
Carrying handle
Horizontal hooktoogle clamp
Latch and catchplate
p.124
Magnetic stud
Bonnet fastener Digital positionindicator
Thermotmeter Infraredthermometer
High quality infraredthermometer
Gas spring Compressionspring
Extension spring Die spring Dynamic washer
New
Stainlesssteel
Stainlesssteel Stainlesssteel
Stainlesssteel
Stainlesssteel
Stainlesssteel
Increasedstock
Increasedstock
p.199 p.212 p.218
p.220 p.227 p.232 p.233
p.248 p.252 p.254 p.256
p.258 p.261 p.262 p.266
p.268 p.270 p.272 p.276
Elasto mountElasto buffer
Speed controller
Rotary damper Shock absorber
Fixed rubberlevelling foot
Threadedadjustable foot
Flexible machinemount
Air cushion Vibration dampeningfoot
Eye bolt
p.244 p.247
Stainless steelarticulated foot
Fixed levellingfoot
Galvanised cable Wire thimble Cable clamp Quick fitting
Dee shackle Bow shackle Rigging screw Chain
inox
p.234 p.238
Fixed levellingfoot
Articulatedlevelling foot
p.196
Anti-vibration pad
New
New
New
New
New
until-25%
Image index 2/2Stainlesssteel
Stainlesssteel
Stainlesssteel
Stainlesssteel
Stainlesssteel
Stainlesssteel
p.278 p.280 p.282 p.284
Quick link U bolt Hose clamp
p.288 p.289 p.292 p.294
p.309 p.314
p.322 p.324 p.330
p.338p.335 p.339 p.340
p.347 p.350 p.356
Band Keysteel Circlip Coiled spring pin
Dowel pin Extractable dowelpin
Cylindrical spacer Hexagonalspacer
Hexagonalthreaded sleeve
Blind rivet Rivet nut
Self tapping insert Cylindricalthreaded sleeve
Threaded bar Shoulder screw
Nylon screw Socket-headscrew
Countersunkscrew
p.358
Set screw
p.306p.301
IncreasedstockEye
screw Stainlesssteel
Stainlesssteel
Increasedstock
Increasedstock
Discounts : maximum discount on price list 2010Stock : depending on availabilityNew : new product
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 51HPC
General items and conditions of sales
Image index
Products pages
Commercials informations
Part number index
Buyers guide
Table ofcontentsImage index .............................................................................................................................................................p.1 � 3
Commercials informations .............................................................................................................................p.6 � 9
Buyers guide ......................................................................................................................................................p.10 � 21
Index icons .........................................................................................................................................................................p.22
Products pages ..............................................................................................................................................p.23 � 374
Positioning-Indexing....................................................................................................................p.23 � 54
Operating elements...................................................................................................................p.55 � 100
Fastening systems.....................................................................................................................p.101 � 128
Indicators........................................................................................................................................p.129 � 148
Springs..............................................................................................................................................p.149 � 194
Vibrations.......................................................................................................................................p.195 � 230
Feets..................................................................................................................................................p.231 � 254
Fixings..............................................................................................................................................p.255 � 280
Fixing accessories ....................................................................................................................p.281 � 328
Screws.............................................................................................................................................p.329 � 374
General terms and conditions of sale.........................................................................................p.376 � 379
Name index....................................................................................................................................................p.380 � 388
Part number index ..................................................................................................................................p.389 � 394
Engrenages HPC in Europe..................................................................................................................................p.395
Request of catalog .....................................................................................................................................................p.396
HPC’s philosophy
Information Special andcustomised
parts
Ordering
Technical supportand commercialteams available,to give advice andother informationfrom 8.00 to 12.20and 13.40 to18.00, monday tofriday.
Information canalso bedownloadeddirectly from thewebsite.
Standard products canbe modified to meetyour requirements.
Customised parts canbe manufactured fromyour drawings orsamples.
Non catalogue itemscan be sourced onyour behalf.
Special manufacturingruns are possible formedium or largerquantities
Ordering morethan 25000 partsnumber on:www.hpceurope.com
Orders can alsobe placed viatelephone, fax orpost.
files
PDF Customer account n°:
Sales contact:.........................................................................................................
.........................................................................................................
.........................................................................................................
Internet password: ...................................................
... customer satisfaction
Payment Delivery CompanyInformation
Cheque
Bank transfer
Banker’s draft
Credit card
Our bank details:BNP PARISBASCentre d’AffairesEntrepreneursLyon Ouest69948 Lyon cedex 20Account n°:00010041122
For any orderplaced before15.00, parts thatare in stock willbe deliveredbefore 18.00 thenext day(Mainland France).We currentlyachieve a 95%success rate.
Any order with avalue of 50 Eurosor more, excludingVAT, will bedelivered Free ofCharge toMainland France(Items longer than1 metre excluded).
Engrenages HPCA limited liabilitycompany, issuedCapital of 76224f
N° 382 911 907 RCSLyon,
Company classificationAPE 4669B
TVA FR 41 382 911 907
58, chemin de la Bruyère69570 DardillyLyon - FRANCE
www.hpceurope.com
Telephone:+33(0)4 37 496 496
Fax:+33(0)4 37 490 055
Ordering from HPC
How to order ?
Products can be found using...
Imageindex
Nameindex
Part numberindex
To place an order...
Having the following available will ensure an order is processed quickly
www.hpceurope.comTel. +33 (0)4 37 496 496 Fax. +33 (0)4 37 490 055
Your HPC account numberCompany name, contact nameInvoice addressDelivery adressAn official order numberReference of any quote receivedThe references and quantities of the products requiredThe delivery date requiredYour VAT Registration number
Requesting a quotefrom HPC
How to get a quote?
The following information will be needed...Company name, contact nameAddress, email and telephone numberA description of the product with as much detail as possibleThe quantity requiredDelivery time requiredIs it a product to be repaired?Is this a prototype (from a drawing or sample?)Any necessary drawings or samples
Specific details that will be required...For Gears:the number of teeth, the module and the material
For Gearboxes:the speed, the torque and the reduction in speed
For Pulleys and Belts:the step size, the material, the number of teeth and the length
For Worms and Wheels:the module, the material, the number of teeth and the reduction inspeed
Send the request for a quote to...
[email protected] Tel. +33 (0)4 37 496 496Fax. +33 (0)4 37 490 055
10 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
IndexingBuyers guide
NEW
Handwheels
Part number VPRA-M VPRA SHA-PT SHA-PTR SHA
Handle revolving - revolving revolvingfolds away -
Material thermosettingplastic
thermosettingplastic technoplastic technoplastic technoplastic
Ext. diameter Ø50 � Ø300 Ø50 � Ø300 Ø100 � Ø200 Ø100 � Ø200 Ø100 � Ø200
Advantages High workingtemperature
High workingtemperature
everydayapplications
everydayapplications
everydayapplications
Custom borediameter andkeysteel
� � � � �
Quality ��� ��� ��� ��� ���Price €€€ €€ €€ €€€ €
Pages 561 571 581 591 601
Partnumber
Type
Characteristics
Advantages
Indexingsystem
Thread /diameter
Material
Quality
Price
Pages
CFC BSM BSM/LOK BPM BPM/LOK BLM
plunger plunger plunger plunger plunger plunger
electriccontact
hexagonalsocket
hexagonalsocket slotted slotted spring
end positionfeedback standard secured
thread standard securedthread
simpleassembly
M6 � M10 M3 � M24 M3 � M24 M3 � M20 M3 � M20 Ø5 � Ø10
steel steel, stainlesssteel or plastic
steel, stainlesssteel or plastic
steel orstainless steel
steel orstainless steel
steel or stainless steel
��� �� ��� �� ��� ��€€ € € € € €
361 401 411 381 391 371
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 111HPC
: pressure pin : ball
DIV DIL DIA SLB SLBW SLBS
locking bolt locking bolt locking bolt locking bolt locking bolt locking bolt
turn to unlock
turn to unlock
pull to unlock
pull to unlock
pull to unlock
pull to unlock
lockable lockable can beautomated lockable lockable lockable
M12 � M20 M6 � M16M8x1 �
M20x1,5M10x1 �M20x1,5 Ø4 � Ø10
M8x1 �M20x1,5
steel or stainless steel
steel steel steel or stainless steel
steel or stainless steel
stainless steel
��� ��� ��� ��� ��� ���€€ € € €€€ €€ €€€
441 461 471 511 521 541
V3RA-PT V3RA-PTR V3RA HLUT, HLU MH MH-PGR
revolving revolving,folds away - revolving revolving folds away
technoplastic technoplastic technoplastic aluminium technoplastic technoplastic
Ø100 � Ø200 Ø100 � Ø200 Ø100 � Ø200 Ø80 � Ø500 R65 � R160 R80 � R160
light light light large diameter light light
� � � � � �
��� ��� ��� ��� ��� ���€€ €€€ € €€€ €€ €€
611 621 631 66 � 671 701 721
12 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Buyers guideTo do manual locking or unlockingKnobs, handles and levers
for pushing, pulling and carrying
Part number PX PO GPB 712-001 712-026 712-024
Description simple withbackplate
smoothhandle
smoothhandle
mushroomhandle
revolvinghandle
Characteristics - load up to60 kg
with equatorialgroove
M4 � M12
smotth orthreaded hole
M3 � M8
threadingM6 � M10
threadingM6 � M8
Material steel steel plastic plastic plastic plastic
Ext. diameter - - Ø19 � Ø47 Ø15 � Ø30 Ø30 � Ø50 Ø20 � Ø30
Quality � �� �� �� �� ��
Price € €€ € € € €
Pages 1001 1001 821 831 911 911
Handles Carrying Gripping
Part number 712-019 712-015 712-051 SK GLB / GLP
Description star knob flat knob star knob knurled knob knurled knob
Fixing method female male female male or female male or female
Attachmentdiameter M4 � M6 M4 � M6
square hole6,5x6,5
M10 threadM4 � M10 M6 � M16
Material plastic plastic plastic plastic plastic
Ext. diameter Ø12 � Ø23 Ø10 � Ø25 Ø50 � Ø63 Ø20 � Ø50 Ø30 � Ø70
Quality �� �� �� �� ��Price € € € € €
Pages 741 751 761 771 80 � 811
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 131HPC
Allows rotation of several degrees around an axleClamp levers
GGB / GGP VMS EMS VML EML EMR
T knob knurled setscrew knurled nut thumb screw
with headthumb nut with
headfast lockingknurled nut
male or female male female male female female
M6 � M8 M4 � M10 M3 � M12 M6 � M12 M5 � M12 M5 � M12
plastic stainless steelstainless steelpolished
stainless steel polished
stainless steel steel
Ø34 � Ø48 Ø16 � Ø36 Ø12 � Ø36 Ø21 � Ø60 Ø27 � Ø60 Ø20 � Ø40
�� ��� ��� ��� ��� ���
€ €€ €€ €€€ €€€ €€
78 � 791 841 851 871 881 861
Part number PCLA-M PCLA-T CLB-M CLB-T CLASS CLASS-T
Material plastic plastic zamak zamak stainlesssteel
stainlesssteel
Fixingdiameter
threaded holeM4 � M16
threaded rodM5 � M16
threaded holeM4 � M16
threaded rodM5 � M16
threaded holeM5 � M12
threaded rodM5 � M12
Handle length(mm) 47 � 126 47 � 126 47 � 126 47 � 126 47 � 109 47 � 109
Quality ��� ��� ��� ��� ���� ����
Price €€ €€ €€ €€ €€€ €€€
Pages 921 931 941 951 961 971
14 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Position indicators
Part number OP3 OP6 OP9
Description mechanicalindicator
mechanicalindicator
mechanicalindicator
Display 4 digit display 5 digit display 5 digit display
Applicationscrew-driver
positionindicator
screw-driverpositionindicator
screw-driverpositionindicator
Precision - - -
Shaftdiameter Ø14 Ø20 Ø30
Quality ��� ��� ���Price €€ €€ €€
Pages 130 � 1311 132 � 1331 134 � 1351
Spring latchesBuyers guide
Part number GE5 / GE18 GE14 GE1006 GP22, GP23 SRG20 SRG25
Type elastic ring elastic ring elastic ring linkedsprings
ajustablering
ajustablering
Models standard /miniature
with padlock-holder
hooks intoslot
recommendedif no joint
with catch-plate
with catch-plate
Material steel or stainless steel steel steel or
stainless steelsteel or
stainless steelsteel or
stainless steelsteel or
stainless steel
Max. tension 300 � 500N 500N 550N 450N - -
Torque (mm). - - - - 77,3 � 83 96 � 121,7
Quality �� �� �� �� ��� ���
Price € € € €€ €€ €€
Pages 1021 1031 1041 1051 1081 1091
Manual fastening
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 151HPC
For easy manual locking
Part number SLV SLH SEH SEV SCH
Type vertical lever
horizontal lever
horizontalstirrup
vertical stirrup
horizontal hook
Secures by pressure pressure hook hook hook
Materialsteel or
stainless steelsteel
steel orstainless steel
steel orstainless steel
steel orstainless steel
Force 700 � 8000N 320 � 650N 1800 � 4500N 1800 � 4500N 1500 � 4000N
Quality ��� ��� ��� ��� ���
Price €€ €€ €€€ €€€ €€€
Pages 116 � 1171 1181 1191 1201 1211
Toggle clamps
SRG40 SRG52 SVG26 SVG32 SVG39 SVG50
ajustablering
ajustablering
ajustablering
ajustablering
ajustablering
ajustablering
with catch-plate
with catch-plate
with catch-plate
with catch-plate
with catch-plate
with catch-plate
steel or stainless steel
steel or stainless steel
steel or stainless steel
steel or stainless steel
steel or stainless steel
steel or stainless steel
- - - - - -
117,4 � 128 78 � 98 82 � 92 106,7 � 121,4 118 � 130,5 174 � 190
��� ��� ��� ��� ��� ���
€€ €€ €€ €€ €€ €€
1101 1111 1121 1131 1141 1151
16 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Feets
Buyers guide
Partnumber
PFC TAD PR PTA PTA-SS PTAF
Basematerial rubber plastic polyamide sheet steel
sheetstainless
steelsheet steel
Basediameter Ø40 Ø25 � Ø55 Ø40 � Ø123 Ø50 � Ø100 Ø50 � Ø100 Ø80 � Ø100
Screwdiameter M8 to M12 M6 to M12 M8 to M30 M10 to M24 M10 to M24 M12 to M24
Articulation Fixed Swiver Swiver Articulated Articulated Articulated
Static load(N) 1800 � 3150 500 � 2500 10000
� 35000 4000 � 15000 4000 � 15000 10000� 15000
Rubber pad yes no yes yes yes yes
Fittable no no yes no no yesCustommade* no no yes yes yes yes
Quality � � �� ��� ��� ���
Price € € €€ €€ €€€ €€
Pages 2321 2331 234 � 2371 238 � 2411 238 � 2391 240 � 2421
NEW
* on quantity
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 171HPC
PAMF PAM PRS PFM PMC CDA PAV
sheetstainless
steel
massivstainless
steel
massivstainless
steel
sheet steelor stainless
steelsheet steel air cushion steel
Ø80 � Ø100 Ø30 � Ø38 Ø50 � Ø100 Ø80 � Ø100 - - Ø60 � Ø217
M12 to M24 M8 to M12 M10 to M24 M12 to M16 M8 to M16 M10 to M12 M12 to M24
Articulated Articulated Swiver Articulated - Fixed Fixed
10000� 15000 8000 � 9000 15000
� 55000 4500 � 9000 1900 � 23000 650 � 6000 5000� 70000
yes no yes yes no no yes
yes no no no yes yes no
yes yes yes no no no no
��� ��� ���� ��� ��� ���� ����
€€€ €€ €€€ €€ €€ €€€ €€€
2401 2431 244 � 2461 2471 248 � 2491 252 � 2531 2541
18 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Buyers guide
Part number CX CY KK KS
Description external internal rectangular bar
Standard DIN 471 DIN 472 DIN 6885 -
Characteristics shaft stopcomponent
bore stopcomponent type A cut to desired
length
MaterialStainless
steelStainless
steelsteel or
stainless steelsteel or
stainless steel
Quality �� �� �� ��
Price €€ €€ € €€€
Pages 2921 2931 290 � 2911 2891
FastenersCirclips
Part number HS HSE HSB MPE MPB
Description hexagonal hexagonal hexagonal hexagonal hexagonal
Characteristicsfemale/female
M3 � M4female/female
M2 � M6female/female
M2 � M6male/female
M3 � M6male/female
M2 � M5
Material stainless steel steel brass steel brass
Quality ��� �� �� �� ��
Price €€€ €€ €€ €€ €€
Pages 3201 314 � 3151 314 � 3151 316 � 3171 318 � 3191
Spacers / Pillars
Keysteel
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 191HPC
Pins
MPS PLS PLN PLB
hexagonal cylindricalmachined
cylindricalmoulded
cylindricalmachined
male/femaleM3 � M4 Ø3 � Ø4 Ø3 � Ø4 Ø2 � Ø5
stainless steel stainless steel nylon brass
��� ��� � ��
€€€ €€€ € €
3211 3091 310 � 3111 312 � 3131
EP SRP DP DHX DH
coiled spring slotted spring dowel extractabledowel dowel
ISO 8750 ISO 8752 ISO 2338 DIN 7979D DIN 6325
very highshear strength
good shearstrength
relativepositioning
easy extraction
relativepositioning
stainless steel stainless steel stainless steel hardened steel hardened steel
��� �� �� ��� ���
€€€ €€ €€ €€€ €
294 � 2971 298 � 3001 304 � 3051 306 � 3071 301 � 3031
20 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Buyers guide
Nuts
ScrewsShoulder screws Set screws
HC NTM
DIN 916 DIN 975
forceconcentratedinto cup lips
secures well,no damage
to shaft
stainless steelA2
stainless steelA2
��� ���
�� ��
€€ €€€
358 � 3591 3611
Part number HSS SHS SHSS
Diagram
Standard ISO 7379 - -
Characteristics
centering orguidance by
precisionshoulder
centering orguidance by
precisionshoulder
centering orguidance by
precisionshoulder
Material hardened steel stainless steel303
stainless steel416 pretreated
Corrosionresistance � ��� ���Mechanicalresistance ��� �� ���
Price € €€ €€€
Pages 340 � 3411 342 � 3431 344 � 3451
Part number SHN/N SHN NIN
Description hexagonal hexagonal hexagonal
Standard DIN 934 DIN 934 DIN 985
Characteristics standard standard loosening anti-vibration
Material nylon Stainless steel A2 Stainless steel A2
Corosionresistance �� ��� ���Mechanicalresistance � �� ��
Price € €€ €€
Pages 3491 3641 3651
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 211HPC
Washers
Assembly screws
Part number SHW/N SHW RCX, RCC
Description simple simple concave orconvex
Standard DIN 125 DIN 125 -
Characteristics standard standardensures good
seating ofscrew-head
Material nylon stainless steel A2 stainless steel
Corrosionresistance �� ��� ���Mechanicalresistance � �� ��
Price € € €€
Pages 3481 3631 3621
TC CHC CHC/SS FHC
DIN 84 DIN 912 DIN 912 DIN 7991
light head can becountersunk
head can becountersunk
centering, headcan be
coutersunk
nylon steel stainless steelA2
stainless steelA2
�� � ��� ���
� ��� �� ��
€ € €€ €€
3471 350 � 3531 354 � 3551 356 � 3571
Index icons
1T
Internal bore Angles
Load Compatibility
Delivery timeMaintenance
Method of fabricationApplicable
MaterialsStandards
Origin
Quality
Resistant to
Special HPC
Others
Modifiable Non-modifiable
Axial load Radial load
Moulded Machined
Steel Cast iron
Aluminium Stainless steel
Bronze Brass
Copper Nylon
Delrin Plastic
Corrosion Shock
News In stock
Custom-made In imperial
Peek
Roboticindustry
Food industry
Maintenancefree No lubrication
Industrial Manual
DIN ISO
Japan Switzerland
Bi-directional Miniature size
Precision Easy assembly
Modular Light
Bearings No fixing
Duo Low costrange
High speed of rotation
from 1 to 8
Heavy duty Max load 1 tonne
In hours or weeks
Hightemperatures
Lowtemperatures
NEW2011
Positioning & indexing
p.24 p.41p.37
p.42 p.48
Lifting pin LONG-LOK spring plunger
Spring loadedplunger
Locking bolts Clampingpin
Stainless steel lifting pinpage 30-31Stainless steel
New
NewNew
NEW!
24 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Clamping pin Quick and easy lockingBAB
- Self locking- Materials:
Pin: Hardened stainless steel 1.4542Spring: stainless steelHandle: plastic (PA6)
- Working temperature: -30°C to 80°C
.Advantages.- Released by simple push action. For clamping
pieces in place easily and quickly- Quick release mechanism for repeated operations- Hard wearing treated pin resists wear (Stainless
steel 1.4542)- Works under heavy load conditions- Corrosion resistant- Ergonomically designed handle avoids
unintentional release
.Accessories.- CDR retaining cable
.Options.- Many alternative colour combinations available
l4l2±1
Ød3l1
+0,6 l3
Example of use
Ød2Ød4
Ød1-0,04-0,08
stainless steel
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 251HPC
REFERENCE ? ? ? ?Prix Uni.
1 à ?
BAB5-10BAB5-15BAB5-20BAB5-25BAB5-30BAB6-10BAB6-15BAB6-20BAB6-25BAB6-30BAB6-35BAB6-40BAB6-45BAB6-50BAB8-20BAB8-25BAB8-30BAB8-35BAB8-40BAB8-45BAB8-50BAB10-20BAB10-25BAB10-30BAB10-35BAB10-40BAB10-45BAB10-50BAB10-60BAB12-25BAB12-30BAB12-35BAB12-40BAB12-45BAB12-50BAB12-60BAB12-70BAB12-80BAB16-30BAB16-35BAB16-40BAB16-45BAB16-50BAB16-60BAB16-70BAB16-80
55555666666666888888810101010101010101212121212121212121616161616161616
10152025301015202530354045502025303540455020253035404550602530354045506070803035404550607080
5,55,55,55,55,57,07,07,07,07,07,07,07,07,09,69,69,69,69,69,69,612,012,012,012,012,012,012,012,014,514,514,514,514,514,514,514,514,519,019,019,019,019,019,019,019,0
33,233,233,233,233,233,233,233,233,233,233,233,233,233,239,239,239,239,239,239,239,239,239,239,239,239,239,239,239,247,647,647,647,647,647,647,647,647,647,647,647,647,647,647,647,647,6
14,514,514,514,514,514,514,514,514,514,514,514,514,514,519,319,319,319,319,319,319,319,319,319,319,319,319,319,319,326,326,326,326,326,326,326,326,326,326,326,326,326,326,326,326,326,3
6,06,06,06,06,07,07,07,07,07,07,07,07,07,08,28,28,28,28,28,28,29,69,69,69,69,69,69,69,6
10,610,610,610,610,610,610,610,610,614,014,014,014,014,014,014,014,0
26,726,726,726,726,726,726,726,726,726,726,726,726,726,733,333,333,333,333,333,333,333,333,333,333,333,333,333,333,339,739,739,739,739,739,739,739,739,739,739,739,739,739,739,739,739,7
10,810,810,810,810,810,810,810,810,810,810,810,810,810,810,810,810,810,810,810,810,813,413,413,413,413,413,413,413,416,716,716,716,716,716,716,716,716,716,716,716,716,716,716,716,716,7
Part number Ød1 l1 Ød2 Ød3 Ød4 l2 l3 l435,14 F
35,14 F
35,14 F
35,14 F
37,18 F
35,14 F
35,14 F
35,14 F
35,14 F
37,18 F
37,18 F
37,18 F
37,18 F
37,18 F
33,99 F
33,99 F
36,34 F
36,34 F
36,34 F
36,34 F
36,34 F
59,43 F
59,43 F
62,54 F
62,54 F
62,54 F
62,54 F
62,54 F
65,57 F
60,73 F
63,75 F
63,75 F
63,75 F
63,75 F
63,75 F
66,61 F
66,61 F
69,74 F
108,65 F
108,65 F
108,65 F
108,65 F
108,65 F
116,82 F
116,82 F
124,20 F
Price each1 to 5
For bore
diameter(H11)
Doubleshear
strength(kN*)
555556666666668888888
10101010101010101212121212121212121616161616161616
242424242435353535353535353563636363636363
100100100100100100100100144144144144144144144144144257257257257257257257257
�-��--��-���-�������������-���-��-�--�--------
Stock*
*Depending on availabililty
BAB
Double shear strength as per DIN 501411+List
6+-5%
10+-10%
25+On request
Qty.Disc.
DISCOUNTS
newdiscounts
26 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
BAB5-10/S 5 10 5,5 10 6,0 26,2 5 24 15 24,07 F
BAB5-15/S 5 15 5,5 10 6,0 26,2 5 24 16 24,07 F
BAB5-20/S 5 20 5,5 10 6,0 26,2 5 24 17 24,07 F
BAB5-25/S 5 25 5,5 10 6,0 26,2 5 24 18 24,07 F
BAB5-30/S 5 30 5,5 10 6,0 26,2 5 24 19 25,48 F
BAB6-10/S 6 10 7,0 10 7,0 26,2 6 35 17 24,32 F
BAB6-15/S 6 15 7,0 10 7,0 26,2 6 35 18 24,32 F
BAB6-20/S 6 20 7,0 10 7,0 26,2 6 35 19 24,32 F
BAB6-25/S 6 25 7,0 10 7,0 26,2 6 35 20 24,32 F
BAB6-30/S 6 30 7,0 10 7,0 26,2 6 35 21 27,00 F
BAB6-35/S 6 35 7,0 10 7,0 26,2 6 35 22 27,00 F
BAB6-40/S 6 40 7,0 10 7,0 26,2 6 35 23 27,00 F
BAB6-45/S 6 45 7,0 10 7,0 26,2 6 35 24 27,00 F
BAB6-50/S 6 50 7,0 10 7,0 26,2 6 35 25 27,00 F
Part number Ød2 Ød3 L2 L3Price each
1 to 5Ød1 L1
For boreH11
Double shear strength
(kN)Weigth
(g)
Stainless steel clamping pinSimple operationBABS
ØD2
ØD1
ØD3
-0,04-0,08
L1 L3L2+0,6±1
- Auto-blocking- Material:
Pin: Hardened stainless steel (630) with resistant finishSpring: stainless steel
- Maximum working temperature: 250°C
.Advantages.- Released by simple push action. For locking pieces
in places easily and quickly- Quick release mechanism for repeated operations- Hard wearing treated pin resists wear
(Stainless steel 1.4542)- Works under heavy load conditions - Corrosion resistant- Compact size with ergonomically designed
stainless steel
1+List
6+-5%
10+-10%
25+On request
Qty.Disc.
DISCOUNTS
newdiscounts
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 271HPC
BAB8-20/S 8 20 9,6 14 8,2 33,1 8 63 23 26,07 F
BAB8-25/S 8 25 9,6 14 8,2 33,1 8 63 25 26,07 F
BAB8-30/S 8 30 9,6 14 8,2 33,1 8 63 27 29,25 F
BAB8-35/S 8 35 9,6 14 8,2 33,1 8 63 29 29,25 F
BAB8-40/S 8 40 9,6 14 8,2 33,1 8 63 30 29,25 F
BAB8-45/S 8 45 9,6 14 8,2 33,1 8 63 32 29,25 F
BAB8-50/S 8 50 9,6 14 8,2 33,1 8 63 34 29,25 F
BAB10-20/S 10 20 12,0 14 9,6 33,1 10 100 35 39,94 F
BAB10-25/S 10 25 12,0 14 9,6 33,1 10 100 37 39,94 F
BAB10-30/S 10 30 12,0 14 9,6 33,1 10 100 40 41,81 F
BAB10-35/S 10 35 12,0 14 9,6 33,1 10 100 43 41,81 F
BAB10-40/S 10 40 12,0 14 9,6 33,1 10 100 46 41,81 F
BAB10-45/S 10 45 12,0 14 9,6 33,1 10 100 49 41,81 F
BAB10-50/S 10 50 12,0 14 9,6 33,1 10 100 52 41,81 F
BAB10-60/S 10 60 12,0 14 9,6 33,1 10 100 56 44,05 F
BAB12-25/S 12 25 14,5 20 10,6 39,5 12 144 51 40,64 F
BAB12-30/S 12 30 14,5 20 10,6 39,5 12 144 55 42,42 F
BAB12-35/S 12 35 14,5 20 10,6 39,5 12 144 59 42,42 F
BAB12-40/S 12 40 14,5 20 10,6 39,5 12 144 64 42,42 F
BAB12-45/S 12 45 14,5 20 10,6 39,5 12 144 68 42,42 F
BAB12-50/S 12 50 14,5 20 10,6 39,5 12 144 72 42,42 F
BAB12-60/S 12 60 14,5 20 10,6 39,5 12 144 80 44,62 F
BAB12-70/S 12 70 14,5 20 10,6 39,5 12 144 89 44,62 F
BAB12-80/S 12 80 14,5 20 10,6 39,5 12 144 98 46,64 F
BAB16-30/S 16 30 19,0 20 14,0 39,5 16 257 138 72,62 F
BAB16-35/S 16 35 19,0 20 14,0 39,5 16 257 147 72,62 F
BAB16-40/S 16 40 19,0 20 14,0 39,5 16 257 156 72,62 F
BAB16-45/S 16 45 19,0 20 14,0 39,5 16 257 165 72,62 F
BAB16-50/S 16 50 19,0 20 14,0 39,5 16 257 175 72,62 F
BAB16-60/S 16 60 19,0 20 14,0 39,5 16 257 193 78,24 F
BAB16-70/S 16 70 19,0 20 14,0 39,5 16 257 212 78,24 F
BAB16-80/S 16 80 19,0 20 14,0 39,5 16 257 233 82,94 F
BAB20-60/S 20 60 25,0 28 20,5 50,1 20 403 338 165,45 F
BAB20-80/S 20 80 25,0 28 20,5 50,1 20 403 388 170,15 F
BAB20-100/S 20 100 25,0 28 20,5 50,1 20 403 438 179,80 F
BAB20-120/S 20 120 25,0 28 20,5 50,1 20 403 488 186,95 F
Part number Ød2 Ød3 L2 L3Price each
1 to 5Ød1 L1
For borediameter
H11
Double shear strength
(kN)Weigth
(g)
BABS
1+List
6+-5%
10+-10%
25+On request
Qty.Disc.
DISCOUNTSnewdiscounts
28 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
BAB10-15/ABAB10-25/ABAB10-35/ABAB10-50/ABAB12-15/ABAB12-25/ABAB12-35/ABAB12-50/ABAB16-25/ABAB16-50/ABAB16-75/A
1010101012121212161616
1525355015253550255075
Part number ØD1 L1 ØD2 ØD3
11,711,711,711,714,214,214,214,218,618,618,6
21,521,521,521,521,521,521,521,526,026,026,0
ØD4min. L212,212,212,212,214,714,714,714,719,219,219,2
10,210,210,210,211,011,011,011,015,115,115,1
25,725,725,725,725,725,725,725,731,031,031,0
36,036,036,036,036,036,036,036,044,544,544,5
2727272727272727272727
3030303030303030303030
4949494949494949494949
87,587,587,587,587,587,587,587,592,892,892,8
1010101012121212161616
L3 L4 L5 L6 L7 L8
For borediameter
H11
Lifting pinBABA With lifting ring
ØD3
ØD2
ØD1-0,04-0,08L2L1
+1
L8
L4
L5 L3
L6L7
R1,5
- Self locking- Materials:
Pin/shackle: Manganese-phosphatetreated steelPress bolt: AluminiumSpring: stainless steel
- Max working temperature: +250°C
.Advantages.- Corrosion resistant- Quick and simple to use to carry workpieces
with a moveable handle and protectionagainst accidental release.
- An H11 toleranced borehole is all that isrequired, specially tapped holes in pieces tobe machined are no longer required
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 291HPC
FF1
F3F2
ØD4
X
X
45°
2,72,72,72,73,53,53,53,54,84,84,8
2,42,42,42,43,23,23,23,24,54,54,5
2,12,12,12,12,82,82,82,84,14,14,1
223230240247231238240262306345384
Part numberF1*(kN)
F2*(kN)
F3*(kN)
Weight(g)
Price each 1 to 2
*Depending on availability
1,51,51,51,51,51,51,51,51,51,51,5
1015253510202545204055
Xmin.
Xmax.
BAB10-15/ABAB10-25/ABAB10-35/ABAB10-50/ABAB12-15/ABAB12-25/ABAB12-35/ABAB12-50/ABAB16-25/ABAB16-50/ABAB16-75/A
111,90 F
111,92 F
111,90 F
111,90 F
121,63 F
121,63 F
121,63 F
121,63 F
134,77 F
134,77 F
134,77 F
BABA
1+List
3+-5%
6+-10%
10+On request
Qty.Disc.
DISCOUNTS
newdiscounts
30 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
BAB10-15/A/SSBAB10-25/A/SSBAB10-35/A/SSBAB10-50/A/SSBAB12-15/A/SSBAB12-25/A/SSBAB12-35/A/SSBAB12-50/A/SSBAB16-25/A/SSBAB16-50/A/SSBAB16-75/A/SS
1010101012121212161616
1525355015253550255075
Part number ØD1 L1 ØD2 ØD3
11,711,711,711,714,214,214,214,218,618,618,6
21,521,521,521,521,521,521,521,525,025,025,0
ØD4min. L212,212,212,212,214,714,714,714,719,219,219,2
10,210,210,210,211,011,011,011,015,115,115,1
25,725,725,725,725,725,725,725,731,031,031,0
36,036,036,036,036,036,036,036,044,544,544,5
2727272727272727272727
3030303030303030303030
4949494949494949494949
87,587,587,587,587,587,587,587,592,892,892,8
1010101012121212161616
L3 L4 L5 L6 L7 L8For bore
H11
Stainless steel lifting pin
- Self locking- Materials:
Ring: Stainless steel: 1.4541Shaft: Precipitation hardened and passivatedRelease button: Red anodised aluminiumSpring: Stainless steel
- Max working temp: +250°C
.Advantages.- Corrosion resistant, weatherproof- Push to release- Quick and simple to use for carrying workpieces, moveable
handle and protection against accidental release.No specialised machining required, only requirement is an H11tolerance for the receiving bore.
BABASS With lifting ring
ØD3
ØD2
ØD1-0,04-0,08L2L1
+1
L8
L4
L5 L3
L6L7
R1,5
NEW!
stainless steel
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 311HPC
2,72,72,72,73,53,53,53,54,84,84,8
2,42,42,42,43,23,23,23,24,54,54,5
2,12,12,12,12,82,82,82,84,14,14,1
223230240247231238240262306345384
Part numberF1*(kN)
F2*(kN)
F3*(kN)
Weight(g)
Price each1 to 2
* For 5 fold safety
1,51,51,51,51,51,51,51,51,51,51,5
1015253510202545204055
X*min.
Xmax.
BAB10-15/A/SSBAB10-25/A/SSBAB10-35/A/SSBAB10-50/A/SSBAB12-15/A/SSBAB12-25/A/SSBAB12-35/A/SSBAB12-50/A/SSBAB16-25/A/SSBAB16-50/A/SSBAB16-75/A/SS
169,51 F
169,51 F
169,51 F
169,51 F
180,94 F
180,94 F
180,94 F
180,94 F
203,84 F
203,84 F
203,84 F
BABASSF
F1
F3F2
ØD4
X
X
45°
1+List
3+-5%
6+-10%
10+On request
Qty.Disc.
DISCOUNTS
32 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Stainless steel clamping pinWith T handleBABT
BAB5-10/TBAB5-15/TBAB5-20/TBAB5-25/TBAB5-30/TBAB6-10/TBAB6-15/TBAB6-20/TBAB6-25/TBAB6-30/T
28,94 F
28,94 F
28,94 F
28,94 F
30,75 F
28,94 F
28,94 F
28,94 F
28,94 F
30,75 F
Part number
Corresponding Double shearbore resistance Weight
Ød1 L1 Ød2 Ød3 L2 L3 L4 L5 L6 H11 kN min. (g)Price each
1 to 5
- Self locking- Materials
Shaft: Stainless steel 1.4542, precipitation hardened with scratch resistant coatingSpring: Stainless steelHandle: Black aluminium (RAL9005)Release button: Black stainless steel
- Working temperature range: -30°C to +150°C
.Advantages.- Push to release- Easy and quick method of attaching, blocking, adjusting etc...
Quickly and easily unlocked for frequently repeated operations.- Corrosion resistant- Highly resistant, anti-wear, suitable for heavy duty applications- Can be used with the CDR retaining cable
.Info..- Shear resistance
conforms to DIN 50141
5 10 5,5 11,8 6,0 31,6 24,1 45,2 12,7 5 24 195 15 5,5 11,8 6,0 31,6 24,1 45,2 12,7 5 24 205 20 5,5 11,8 6,0 31,6 24,1 45,2 12,7 5 24 205 25 5,5 11,8 6,0 31,6 24,1 45,2 12,7 5 24 215 30 5,5 11,8 6,0 31,6 24,1 45,2 12,7 5 24 226 10 7,0 11,8 7,0 31,6 24,1 45,2 12,7 6 35 206 15 7,0 11,8 7,0 31,6 24,1 45,2 12,7 6 35 216 20 7,0 11,8 7,0 31,6 24,1 45,2 12,7 6 35 226 25 7,0 11,8 7,0 31,6 24,1 45,2 12,7 6 35 236 30 7,0 11,8 7,0 31,6 24,1 45,2 12,7 6 35 24
1+List
6+-5%
10+-10%
25+On request
Qty.Disc.
DISCOUNTS
L6
L5
Ød2 Ød3
Ød1-0,04-0,08
+1- L1+0,6
L3
L4
L2
NEW!
stainless steel
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 331HPC
BABT
BAB6-35/TBAB6-40/TBAB6-45/TBAB6-50/TBAB8-20/TBAB8-25/TBAB8-30/TBAB8-35/TBAB8-40/TBAB8-45/TBAB8-50/TBAB10-20/TBAB10-25/TBAB10-30/TBAB10-35/TBAB10-40/TBAB10-45/TBAB10-50/TBAB10-60/TBAB12-25/TBAB12-30/TBAB12-35/TBAB12-40/TBAB12-45/TBAB12-50/TBAB12-60/TBAB12-70/TBAB12-80/T
30,75 F
30,75 F
30,75 F
30,75 F
31,94 F
31,68 F
33,69 F
33,69 F
33,69 F
33,69 F
33,69 F
46,72 F
46,72 F
49,17 F
49,17 F
49,17 F
49,17 F
49,17 F
51,56 F
47,68 F
50,11 F
50,11 F
50,11 F
50,11 F
50,11 F
52,43 F
52,43 F
54,72 F
Part number
Corresponding Double shearbore resistance Weight
Ød1 L1 Ød2 Ød3 L2 L3 L4 L5 L6 H11 kN min. (g)Price each
1 to 56 35 7,0 11,8 7,0 31,6 24,1 45,2 12,7 6 35 256 40 7,0 11,8 7,0 31,6 24,1 45,2 12,7 6 35 266 45 7,0 11,8 7,0 31,6 24,1 45,2 12,7 6 35 276 50 7,0 11,8 7,0 31,6 24,1 45,2 12,7 6 35 288 20 9,5 14,7 8,2 35,8 26,9 51,5 15,8 8 63 378 25 9,5 14,7 8,2 35,8 26,9 51,5 15,8 8 63 398 30 9,5 14,7 8,2 35,8 26,9 51,5 15,8 8 63 418 35 9,5 14,7 8,2 35,8 26,9 51,5 15,8 8 63 438 40 9,5 14,7 8,2 35,8 26,9 51,5 15,8 8 63 448 45 9,5 14,7 8,2 35,8 26,9 51,5 15,8 8 63 468 50 9,5 14,7 8,2 35,8 26,9 51,5 15,8 8 63 48
10 20 12,0 14,7 9,6 35,8 26,9 51,5 15,8 10 100 4410 25 12,0 14,7 9,6 35,8 26,9 51,5 15,8 10 100 4710 30 12,0 14,7 9,6 35,8 26,9 51,5 15,8 10 100 4910 35 12,0 14,7 9,6 35,8 26,9 51,5 15,8 10 100 5210 40 12,0 14,7 9,6 35,8 26,9 51,5 15,8 10 100 5510 45 12,0 14,7 9,6 35,8 26,9 51,5 15,8 10 100 5810 50 12,0 14,7 9,6 35,8 26,9 51,5 15,8 10 100 6110 60 12,0 14,7 9,6 35,8 26,9 51,5 15,8 10 100 6712 25 14,5 18,2 10,6 35,1 25,3 59,1 20,2 12 144 7312 30 14,5 18,2 10,6 35,1 25,3 59,1 20,2 12 144 7712 35 14,5 18,2 10,6 35,1 25,3 59,1 20,2 12 144 8112 40 14,5 18,2 10,6 35,1 25,3 59,1 20,2 12 144 8612 45 14,5 18,2 10,6 35,1 25,3 59,1 20,2 12 144 9012 50 14,5 18,2 10,6 35,1 25,3 59,1 20,2 12 144 9412 60 14,5 18,2 10,6 35,1 25,3 59,1 20,2 12 144 10312 70 14,5 18,2 10,6 35,1 25,3 59,1 20,2 12 144 11112 80 14,5 18,2 10,6 35,1 25,3 59,1 20,2 12 144 119
1+List
6+-5%
10+-10%
25+On request
Qty.Disc.
DISCOUNTS
34 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
BAB6-5/CBAB6-10/CBAB8-5/CBAB8-10/CBAB10-5/CBAB10-10/CBAB12-5/CBAB12-10/C
0 - 55 - 100 - 55 - 100 - 55 - 100 - 55 - 10
46,42 F
46,44 F
47,86 F
47,86 F
55,33 F
55,33 F
58,25 F
58,25 F
Part number Ød2 Ød3 Ød4 L2 L3 L4L5
openPrice each
1 to 57,07,09,59,5
12,012,014,014,0
3838383847474747
17,517,517,517,523,023,023,023,0
5,05,06,56,58,78,79,49,4
30,230,230,230,236,036,036,036,0
11,011,011,011,011,011,013,513,5
33334444
6688
10101212
Ød1 L1 H11 (N) max (g)6688
10101212
1618161821232123
1617192038394244
For borediameter
Clampingforce Weight
Short clamping pin BABC
L4
Ød3
CDR retaining cablewith fixing loops
L1 L5L2 L3
Ød1
Ød2Ød4
-0,04-0,08
- Self locking- Released by simple push action- Allows thin sheets of metal to be held
and fixed solidly- 5 mm clamping distance- Working temperature: -30°C to +80°C- Materials:
Shaft: Stainless steel 303Handle : grey PA6 plasticSpring: stainless steel
iAdvantagesi- Corrosion resistant- Ergonomically designed handle- Can be secured with optional
CDR retaining cable
With span compensation
1+List
6+-5%
10+-10%
25+On request
Qty.Disc.
DISCOUNTS
newdiscounts
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 351HPC
CDR-150CDR-200CDR-300
150200300
556
���
11,57 F
11,71 F
12,05 F
Part numberL
(mm)Weight
(g)Price each
1 to 5Stock*
*Depending on availability
Retaining cable
L
- With fastening loops- Materials:
Cable: stainless steel withtransparent PVC coveringRings: stainless steel
- Maximum operating temperature:80°C
.Information.- This cable attaches to the BAB
clamping pin- Its role is to prevent it from getting
lost- This cable is used to retain BAB
clamping pins in the area wherethey are to be used. It is secured inplace with an M6 screw.
Typical application
Ø2
Ø20
For clamping pin CDR
stainless steel
1+List
6+-5%
10+-10%
25+On request
Qty.Disc.
DISCOUNTS
36 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
CFC-M6-OCFC-M8-OCFC-M10-O
CFC-M6-FCFC-M8-FCFC-M10-F
M6M8
M10
M6M8
M10
2,54,04,5
2,54,04,5
27,028,532,0
27,028,532,0
334
334
223
223
0,50,71,0
1,21,52,0
061509
061509
203035
203035
59,76 F
60,45 F
63,51 F
59,76 F
60,45 F
63,51 F
Part number ØD ØD1 L H H1 L1Price each
1 to 5
Contactpressure (N)
initial finalType O - contact normally open
Type F - contact normally closed
Stock*
���
���
*Depending on availability
Typical application
Spring loaded position switch
- Threaded position switch- Inductive limit switch for position
sensing- Electrical characteristics:- Supply voltage 10 to 30V dc- Maw switching current 200mA- Working temperature: -25°C to +70°C- Ingress protection: IP67- Connecting cable: Ø3.5mm, length 2m- Materials:
Body: blackened steelSpring: steelPin: Hardened steel
.Safety.- This position switch is not suitable for
use in personnel safety applications
F1
F2
ØDØD1
LED
Ø4
≈12 L H
H1
Sliding drawer
Feedback informationPosition 1: Drawer openPosition 2: Drawer closed
1 2
Wiring diagram
BN BU
BK
BN = brownBK = blackBU = blue
PNPNormally closed
Normally open
Limit switch feedbackCFC
6+-5%
20+On request
1+List
QtyDisc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 371HPC
Spring loaded plungerBall end BLM
6+-5%
20+-10%
50+-15%
100+-25%
250+-40%
400+On request
1+List.
Qty.Disc.
DISCOUNTS
- Plunger for positioning and locating- Materials :
Body: Stainless steel or thermosettingplasticSpring: Stainless steelBall: Stainless steel or Delrin
Stainless steel bodyBLM5SSBLM6SSBLM8SSBLM10SSBLM5PBLM6PBLM8PBLM10PPlastic bodyBLM5PSBLM6PSBLM8PSBLM10PSBLM5PPBLM6PPBLM8PPBLM10PP
Stainless steel 5 4,0 5,6 6,0 1,0 1,0 4 7 0,60Stainless steel 6 5,0 6,5 7,0 1,0 1,5 6 12 1,00Stainless steel 8 6,5 8,5 9,0 1,0 1,8 6 12 2,00Stainless steel 10 8,0 12,0 13,5 2,5 2,7 10 20 6,00
Delrin 5 4,0 5,6 6,0 1,0 0,6 4 7 0,60Delrin 6 5,0 6,5 7,0 1,0 1,1 6 12 1,00Delrin 8 6,5 8,5 9,0 1,0 1,5 6 12 2,00Delrin 10 8,0 12,0 13,5 2,5 2,3 10 20 6,00
Stainless steel 5 5,0 5,6 6,0 1,0 1,0 4 7 0,40Stainless steell 6 5,0 6,5 7,0 1,0 1,5 6 12 0,70Stainless steel 8 6,5 8,5 9,0 1,0 1,8 6 12 1,50Stainless steel 10 8,0 12,0 13,5 2,5 2,7 10 20 3,14
Delrin 5 4,0 5,6 6,0 1,0 1,2 4 7 0,35Delrin 6 5,0 6,5 7,0 1,0 1,5 6 12 0,66Delrin 8 6,5 8,5 9,0 1,0 2,0 6 12 1,46Delrin 10 8,0 12,0 13,5 2,5 2,7 10 20 1,44
1,41 F
1,50 F
1,85 F
2,39 F
1,64 F
1,68 F
2,08 F
2,61 F
0,89 F
0,97 F
1,14 F
2,08 F
1,01 F
1,10 F
2,56 F
3,28 F
Part number
Contact PressureInitial Final Weight
Balle ØD ØD1 ØD2 L L1 H F1 (N) F2 (N) (g)Price each
1 to 5
F1
F2
L1
L H
ØD1ØD+0,08 ØD2
NEW!
38 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
ØD ØD1 L H N
Approxweight
(g)F1
initialF2
finalSteelStainless
steelStainless
steelSteel
Price each 1 to 5
BPM3 BPM3SS M3 1,5 7 0,5 0,4 1,5 3 0,2 � � 1,82 F 5,07 F
BPM4 BPM4SS M4 2,5 9 0,8 0,6 4,0 10 0,6 � � 1,33 F 4,20 F
BPM5 BPM5SS M5 3,0 12 0,9 0,8 6,0 11 0,9 � � 1,33 F 4,23 F
BPM6 BPM6SS M6 3,5 14 1,0 1,0 9,0 13 1,5 � � 1,33 F 4,24 F
BPM8 BPM8SS M8 5,0 16 1,5 1,2 15,0 30 3,5 � � 1,82 F 5,58 F
BPM10 BPM10SS M10 6,0 19 2,0 1,6 20,0 35 7,0 � � 1,92 F 6,25 F
BPM12 BPM12SS M12 8,0 22 2,5 2,0 30,0 55 10,0 � � 2,98 F 7,73 F
BPM16 BPM16SS M16 10,0 24 3,5 2,5 65,0 125 24,0 � � 3,94 F 9,21 F
BPM20 BPM20SS M20 12,0 30 4,5 2,5 80,0 160 44,3 � - 5,99 F12,01 F
Part number
*Depending on availability
Pressure (N)
With ball tipBPMSpring plunger with slotted head
ØD
N
F1F2
HL
- Positioning and locating screw- Materials:
Body: steel (class 5.8)Ball: stainless steel 303
- Finish:Body: black oxideBall: bright hardened
.See also....- BSM, BPM/LOK and BSM/LOK spring plungers
.Applications.- Shaft positioning- Locating handles and grips
Typical application:positioning pin
ØD1
Steel version
Stainless steel version
Stainlesssteel
stainless steel
6+-5%
20+-10%
50+-15%
100+-25%
250+-40%
400+On request
1+List
Qty.Disc.
DISCOUNTS
Steel
Stock*
newdiscounts
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 391HPC
BPM3/LOKBPM4/LOKBPM5/LOKBPM6/LOKBPM8/LOKBPM10/LOKBPM12/LOKBPM16/LOK
BPM3SS/LOKBPM4SS/LOKBPM5SS/LOKBPM6SS/LOKBPM8SS/LOKBPM10SS/LOKBPM12SS/LOKBPM16SS/LOK
M3M4M5M6M8M10M12M16
M3M4M5M6M8M10M12M16
1,52,53,03,55,06,08,0
10,0
1,52,53,03,55,06,08,0
10,0
79
121416192224
79
121416192224
456789
1014
456789
1014
0,50,80,91,01,52,02,53,5
0,50,80,91,01,52,02,53,5
0,40,60,81,01,21,62,02,5
0,40,60,81,01,21,62,02,5
1,54,06,09,0
15,020,030,065,0
1,54,06,09,0
15,020,030,065,0
3101113303555
125
3101113303555
125
�������-
������--
5,84 F
3,03 F
3,13 F
3,19 F
3,86 F
4,05 F
11,07 F
14,18 F
9,69 F
6,66 F
6,74 F
6,74 F
8,55 F
9,80 F
16,35 F
20,52 F
Partnumber ØD ØD1 L L1 H N
F1initial
F2final
Priceeach
1 to 5Steel
Stainless steel
±0,5 Stock*
*Depending on availability
Pressure (N)
With ball tipLONG-LOK slotted spring plunger
BPMLOK
M3M4M5M6M8M10M12M16
0,100,100,100,250,400,701,004,20
0,250,250,250,450,600,801,204,30
Size
Screwing-intorque(Nm)
Unscrewingtorque(Nm)
Typical application:positioning pin
ØD
N
F1F2
ØD1
HL
L1
L1L2
M8 to M16 sized screwApprox 2 turns of thread
6+-5%
20+-10%
50+-15%
100+-25%
250+-40%
400+On request
1+List
Qty.Disc.
DISCOUNTS
- Positioning and locating screw LONG-LOKanti-vibration finish
- Materials:Body: steel (class 5.8) or stainless steelLONG-LOK nylon threadBall: stainless steel 303
- Finish:Body: black oxideBall: bright hardened
.Advantages.- Vibration proof- High torque required to unscrew- Mounts securely in any orientation
.Applications.- Use where spring plungers are repeatedly
installed and removed
newdiscounts
M3 to M6 sizedscrew
40 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
BSM3BSM4BSM5BSM6BSM8BSM10BSM12BSM16BSM20BSM24
BSM4PBSM5PBSM6PBSM8PBSM10PBSM12PBSM16P
BSM5SSBSM6SSBSM8SSBSM10SSBSM12SS
7,95 F
6,11 F
5,94 F
6,16 F
7,25 F
8,12 F
10,60 F
11,69 F
13,83 F
22,27 F
7,09 F
6,90 F
7,09 F
8,25 F
9,87 F
12,47 F
15,23 F
17,47 F
17,43 F
19,39 F
26,47 F
35,82 F
Part number ØD ØD1 L H T T1 N S
Pressure (N) F1
initialF2
final
Priceeach 1 to 5
M3M4M5M6M8M10M12M16M20M24
M4M5M6M8M10M12M16
M5M6M8M10M12
1,01,52,42,73,54,06,07,5
10,012,0
1,52,42,73,54,06,07,5
2,42,73,54,06,0
10151820222228324052
15182022222832
1820222228
1,51,52,32,53,03,04,05,07,0
10,0
1,52,32,53,03,04,05,0
2,32,53,03,04,0
1,52,02,02,53,03,55,06,08,0
10,0
2,02,02,53,03,55,06,0
2,02,53,03,55,0
1,00,60,81,01,41,42,02,53,03,0
1,00,60,81,01,41,42,0
0,81,01,41,42,0
0,40,60,81,01,21,62,02,52,52,5
0,60,81,01,21,62,02,5
0,81,01,21,62,0
0,71,31,52,02,53,04,05,06,08,0
1,31,52,02,53,04,05,0
1,52,02,53,04,0
0,556799
10456080
56799
1045
5678
10
3162020353555
100120160
162020353555
100
1717293147
�������-�-
����---
�����
Steel body / steel pin
Stainless steel body / stainless steel pin
Steel body / plastic pin
*Depending on availability
Stock*
Spring plunger with internal hexagonal socketWith pressure pinBSM
BSMPBSMSS
Steel body and pin Steel bodyplastic pin
Stainless steelbody and pin
stainless steel
Ngrub screw glued in
ØD
T
F1F2
T1ØD1
HL S6+-5%
20+-10%
50+-15%
100+-30%
250+-50%
400+On request
1+List
Qty.Disc.
DISCOUNTS
newdiscounts
- Three versions to choosefrom
- Materials:Body: blackened steel(class 5.8) or stainlesssteel (303)Pin: steel, stainless steelor plastic
.Uses.- Locating- Retaining
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 411HPC
Ngrub
screwglued in
D
T
F1
F2
T1
D1
HL
L1 Approx. 2 turns ofthread
S
Long-Lok spring plungerWith pressure pin BSMLOK
BSMSSLOKBSMPLOK
BSM5/LOKBSM6/LOKBSM8/LOKBSM10/LOKBSM12/LOKBSM16/LOK
BSM5SS/LOKBSM6SS/LOKBSM8SS/LOKBSM10SS/LOKBSM12SS/LOK
BSM5P/LOKBSM6P/LOKBSM8P/LOKBSM10P/LOKBSM12P/LOKBSM16P/LOK
M5M6M8M10M12M16
M5M6M8M10M12
M5M6M8M10M12M16
2,42,73,54,06,07,5
2,42,73,54,06,0
2,42,73,54,06,07,5
182022222832
1820222228
182022222832
7789
1014
7789
10
7789
1014
2,32,53,03,04,05,0
2,32,53,03,04,0
2,32,53,03,04,05,0
2,02,53,03,55,06,0
2,02,53,03,55,0
2,02,53,03,55,06,0
0,81,01,41,42,02,5
0,81,01,41,42,0
0,60,81,01,41,42,0
0,81,01,21,62,02,5
0,81,01,21,62,0
0,81,01,21,62,02,5
1,52,02,53,04,05,0
1,52,02,53,04,0
1,52,02,53,04,05,0
6799
1045
5678
10
6799
1045
2020353555
100
1717293147
2020353555
100
����--
�����
�����-
3,33 F
3,42 F
3,97 F
4,33 F
6,99 F
9,74 F
7,49 F
7,49 F
8,38 F
9,69 F
14,04 F
3,68 F
3,86 F
4,40 F
5,07 F
7,84 F
17,70 F
Part number D D1 L L1 H T T1 N S F1
initialF2
final
Priceeach1 to 5±0,5
M5M6M8M10M12M16
0.100.250.400.701.004.20
0.250.450.600.801.204.30
Size
Screwing-in torque
(Nm)
Unscrewingtorque(Nm)
Steel body / steel pin
Stainless steel body / stainless steel pin
Steel body / plastic pin
*Depending on availability
Stock*Pressure (N)
newdiscounts
- Screw for psitioning and indexing
- Spring plunger with LONG-LOK anti-vibration treatment
- For locating and positioning- Hexagonal socket- Materials:
Body: blackened steel (class 5.8) or stainless steel (303)Pin: hardened steel, hardened stainless steel or plasticLONG-LOK nylon thread
- Finish:Body: black oxide (steel) or polished (stainless steel)
.Advantages.- Vibration proof- High torque required to unscrew- Mounts securely in any orientation
.Application.- Use where spring plungers are
repeatedly installed and removed6+
-5%20+
-10%50+
-15%100+-20%
250+-25%
400+On request
1+List
Qty.Disc.
DISCOUNTS
42 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Locating bolt support bracketSDA Mounting holes parallel to locating bolt
- Use of a support bracket allowslocating bolts to be positionedquickly
- Compatible with all types of locatingbolts
- Material: blackened steel
L1
ØD1
K
L3
ØD2
ØD3 ØD4
S
6+-10%
20+On request
1+List
Qty.Disc.
DISCOUNTS
SDA12SDA12-FSDA16SDA16-FSDA20SDA20-F
10,02 F
10,02 F
10,86 F
10,86 F
13,67 F
10,86 F
������
Price each1 to 5
M12M12 x 1,5
M16M16 x 1,5
M20M20 x 1,5
363646464646
5,55,55,55,55,55,5
101010101010
242432323232
252533333333
101013131313
121215151515
Partnumber ØD1 ØD2 ØD3 ØD4 K L1 L3 S
Stock*
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 431HPC
Locating bolt support bracketSDBMounting holes at 90° to index bolt
- Use of a support bracket allowslocating bolts to be mounted quicklyor in different applications.
- Compatible with all types of locatingbolts
- Material: Body: blackened steelScrew: brass
L1
ØD1
K
L3
ØD2
ØD3
ØD4
S
6+-10%
20+On request
1+List
Qty.Disc.
DISCOUNTS
SDB12SDB12-FSDB16SDB16-FSDB20SDB20-F
13,19 F
13,19 F
13,09 F
13,09 F
15,36 F
12,73 F
Price each1 to 5
M12M12 x 1,5
M16M16 x 1,5
M20M20 x 1,5
363646464646
5,55,55,55,55,55,5
101010101010
242432323232
252533333333
101013131313
121215151515
Partnumber ØD1 ØD2 ØD3 ØD4 K L1 L3 S
������
Stock*
*Dans la limite du disponible
44 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
20+On request
6+-10%
1+List
Qty.Disc.
DISCOUNTS
Locking boltTurn to unlockDIV
- Materials:Body: Blackened steel (class 5.8)Handle: Powder coated steelPin: Hardened steel
- Locking nut supplied
.Options.- Stainless steel version- Fine thread (on request)
.Uses.- Locking bolts are used where the
pin needs to be retracted completely
- Rotating the handle through 180° moves the pin between the two positions
L
D1
B
L3
H
SW
ØD-0,02-0,04
F
L2
ØD2
B1
DIV12-5DIV12x1,5-5DIV12-6DIV12x1,5-6DIV12-8DIV12x1,5-8DIV16-6DIV16x1,5-6DIV16-8DIV16x1,5-8DIV16-10DIV16x1,5-10DIV20-8DIV20x1,5-8DIV20-10DIV20x1,5-10DIV20-12DIV20x1,5-12
14,36 F
14,36 F
14,36 F
14,36 F
14,36 F
14,36 F
17,19 F
17,19 F
17,19 F
17,19 F
17,19 F
17,19 F
19,63 F
19,63 F
19,63 F
19,63 F
19,63 F
19,63 F
Part numberPrice each
1 to 5
*Depending on availability
InitialF1 (N)
FinalF2 (N)
888888151515151515202020202020
151515151515353535353535606060606060
Spring strength
Fx30°1,31,31,81,82,32,31,81,82,32,32,82,82,32,32,82,83,03,0
D1 ØD ØD2 L L2 L3 B B1 H SW
M12M12x1,5
M12M12x1,5
M12M12x1,5
M16M16x1,5
M16M16x1,5
M16M16x1,5
M20M20x1,5
M20M20x1,5
M20M20x1,5
5566886688
101088
10101212
121212121212161616161616162020202020
46,846,846,846,846,846,860,460,460,460,460,460,470,070,070,070,070,070,0
303030303030404040404040505050505050
252525252525323232323232353535353535
10,810,810,810,810,810,814,414,414,414,414,414,418,018,018,018,018,018,8
3,63,63,63,63,63,64,84,84,84,84,84,86,06,06,06,06,06,0
888888101010101010121212121212
191919191919242424242424303030303030
Stock*�-
�-
�-
�-
�-
�---�---
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 451HPC
20+On request
6+-10%
1+List
Qty.Disc.
DISCOUNTS
Locking bolt
- Material: Stainless steel- Locking nut supplied
.Options.- Fine thread (on request)
.Uses.- Locking bolts are used where the pin
needs to be retracted completely- Rotating the handle through 180° moves
the pin between the two positions
Turn to unlock DIVSS
L
D1
B
L3
H
SW
ØD-0,02-0,04
F
L2
ØD2
B1
DIV12-5/SSDIV12x1,5-5/SSDIV12-6/SSDIV12x1,5-6/SSDIV12-8/SSDIV12x1,5-8/SSDIV16-6/SSDIV16x1,5-6/SSDIV16-8/SSDIV16x1,5-8/SSDIV16-10/SSDIV16x1,5-10/SSDIV20-8/SSDIV20x1,5-8/SSDIV20-10/SSDIV20x1,5-10/SSDIV20-12/SSDIV20x1,5-12/SS
19,46 F
19,46 F
19,46 F
19,46 F
19,46 F
19,46 F
21,84 F
21,84 F
21,84 F
21,84 F
21,84 F
21,84 F
27,18 F
27,18 F
27,18 F
27,18 F
27,18 F
27,18 F
Part numberPrice each
1 to 5InitialF1 (N)
FinalF2 (N)
888888151515151515202020202020
151515151515353535353535606060606060
Spring strength
Fx30°1,31,31,81,82,32,31,81,82,32,32,82,82,32,32,82,83,03,0
D1 ØD ØD2 L L2 L3 B B1 H SWM12
M12x1,5M12
M12x1,5M12
M12x1,5M16
M16x1,5M16
M16x1,5M16
M16x1,5M20
M20x1,5M20
M20x1,5M20
M20x1,5
5566886688
101088
10101212
121212121212161616161616202020202020
46,846,846,846,846,846,860,460,460,460,460,460,470,070,070,070,070,070,0
303030303030404040404040505050505050
252525252525323232323232353535353535
10,810,810,810,810,810,814,414,414,414,414,414,418,018,018,018,018,018,0
3,63,63,63,63,63,64,84,84,84,84,84,86,06,06,06,06,06,0
888888101010101010121212121212
191919191919242424242424303030303030
Stock*�-
�-
�-
�-
�-
�-----
�-
*Depending on availability
stainless steel
46 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Lever operated locking boltDIL
- Locking bolt- Material: steel (class 5.8)- Finish: blue zinc plated
.Info..- Locking bolts can be used where lateral
movement needs to be restricted- Raising the lever unlocks the bolt
L1
L
ØD1
ØD
F
L2 H
L3
6+-10%
20+On request
1+List
Qty.Disc.
DISCOUNTS
A
SW1
ØD2
+0,01-0,03
Lift the lever to unlock
DIL6DIL10DIL12DIL16
1,610,013,042,0
����
7,01 F
7,51 F
8,17 F
9,74 F
L L1 L2 L3 H APrice each
1 to 541,565,073,0
102,5
20,033,531,850,5
12,017,522,227,0
17,030,028,044,5
9,514,019,025,0
15,522,931,232,7
2,33,54,74,7
TighteningForce
max (Nm)468
10
Part numberM6M10M12M16
ØD ØD1 ØD2 SW16
101216
Fx30°0,71,11,31,6
initialF1 (N)
finalF2 (N)
Spring strength
10162223
3444
Stock*
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 471HPC
Ring operated locking boltDIAPull ring to unlock
- Materials:Steel versionBody : steel (class 5.8)Pin: hardened steelStainless steel versionBody: stainless steel 303Pin: Hardened stainless steel 420 Ring: Stainless steel 301
- Finish:Steel versionPin: hardened, ground and blackenedStainless steel versionPin : hardened , polished andground
.Info..- Index bolts are used whenever
lateral movement needs to blocked.Once released, another position canbe set.
- The ring allows the unlocking actionto be automated; by usingpneumatic cylinder for example orsome other remote controlmechanism.
6+-10%
20+On request
1+List
Qty.Disc.
DISCOUNTS
L1 L4SW2
ØD
F
L2
H
ØD4
-0,02-0,04
SW1
ØD1
DIA8-4DIA10-5DIA12-6DIA16-8DIA20-10
8,56 F
8,15 F
9,04 F
12,03 F
17,14 F
ØD ØD1 ØD4 L1 L2 L4 H SW1 SW2 Fx30°Price each
1 to 5
1523232828
1517202628
678
1012
1315172325
4568
10
1013141922
1317192430
1,01,31,82,32,8
Part numberinitialF1 (N)
finalF2 (N)
Spring strength
1212143540
656
1515
4568
10
M8x1,0M10x1,0M12x1,5M16x1,5M20x1,5
DIA8-4/SSDIA10-5/SSDIA12-6/SSDIA16-8/SSDIA20-10/SS
14,94 F
14,22 F
16,73 F
22,32 F
36,87 F
1523232828
1517202628
678
1012
1315172325
4568
10
1013141922
1317192430
1,01,31,82,32,8
1212143540
�����
�����
656
1515
4568
10
M8x1,0M10x1,0M12x1,5M16x1,5M20x1,5
Steel, hardened steel pin
Stainless steel, hardened stainless steel pin
Stock*
*Depending on availability
48 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Clamping pin for sheetsPPD
- For sheet or thin walled workpieces- Material:
Polyamide knurled knob, matt surface finishBody: Chromed steelPin: stainless steel
.Info..- Locking version, pull and turn to lock.
Non- lockingPPD6-8PPD6-10PPD8-10PPD8-12LockingPPD6-8/APPD6-10/APPD8-10/APPD8-12/A
26 6 9 23 8,5 6,0 10x1,0 14 16 de 1 à 5 4026 6 9 23 10,5 6,0 10x1,0 14 16 de 1 à 5 4032 8 10 28 10,0 7,5 12x1,5 16 18 de 1 à 5 6232 8 10 28 12,0 7,5 12x1,5 16 18 de 1 à 5 65
26 6 9 23 8,5 6,0 10x1,0 14 16 de 1 à 5 4026 6 9 23 10,5 6,0 10x1,0 14 16 de 1 à 5 4032 8 10 28 10,0 7,5 12x1,5 16 18 de 1 à 5 6232 8 10 28 12,0 7,5 12x1,5 16 18 de 1 à 5 65
19,93 F
19,93 F
21,94 F
21,94 F
19,93 F
19,93 F
21,94 F
21,94 F
Part numberWeight
Ød1 Ød2 L H L1 L2 ØD Y Y1 P (g)Price each
1 to 5
Ød1
1,5Y1
Y
ØD P
L2L1
L
H
Ød2
6+-5%
20+On request
1+List
Qty.Disc.
DISCOUNTS
With or without locking
NEW!
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 491HPC
Locating bolt with flangeWith or without locking PPF
- With predrilled mounting flange- Material:
Polyamide knurled head with matt finishFlange: Plated steelPin: Stainless steel
.Info..- Locking version: Pull and turn to lock
Non-lockingPPF6-6PPF6-14PPF8-8PPF8-18LockingPPF6-6/APPF6-14/APPF8-8/APPF8-18/A
26 6 5 23 6 2 16 42 30 4,30 40,926 6 5 23 14 2 16 42 30 4,30 41,932 8 6 28 8 2 20 50 34 5,30 71,432 8 6 28 18 2 20 50 34 5,30 74,4
26 6 5 23 6 2 16 42 30 4,30 41,926 6 5 23 14 2 16 42 30 4,30 42,932 8 6 28 8 2 20 50 34 5,30 72,432 8 6 28 18 2 20 50 34 5,30 73,4
31,70 F
31,70 F
34,92 F
34,92 F
30,47 F
30,47 F
33,53 F
33,53 F
Part numberWeight
Ød1 Ød2 L H L3 L2 A B C Ød3 (g)Price each
1 to 5
Ød1
90°
C
Ød2Ød3
A
B
L2
L3
L
H
ØD
6+-5%
20+On request
1+List
Qty.Disc.
DISCOUNTS
NEW!
50 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
SLB10-A 5 M10 x 1,0 21 47 17 7 15 5 13 - 1,3 5 12 � 10,01 F
SLB10-B 5 M10 x 1,0 21 47 17 7 15 5 13 17 1,3 5 12 � 10,34 F
SLB10-C 5 M10 x 1,0 21 47 17 7 15 5 13 - 1,3 5 12 � 12,66 F
SLB10-D 5 M10 x 1,0 21 47 17 7 15 5 13 17 1,3 5 12 � 12,78 F
SLB12-A 6 M12 x 1,5 25 56 20 8 17 6 14 - 1,8 6 14 � 11,15 F
SLB12-B 6 M12 x 1,5 25 56 20 8 17 6 14 19 1,8 6 14 � 11,51 F
SLB12-C 6 M12 x 1,5 25 56 20 8 17 6 14 - 1,8 6 14 � 14,02 F
SLB12-D 6 M12 x 1,5 25 56 20 8 17 6 14 19 1,8 6 14 � 14,40 F
SLB16-A 8 M16 x 1,5 33 74 26 10 23 8 19 - 2,3 15 35 � 14,40 F
SLB16-B 8 M16 x 1,5 33 74 26 10 23 8 19 24 2,3 15 35 � 15,36 F
SLB16-C 8 M16 x 1,5 33 74 26 10 23 8 19 - 2,3 15 35 � 16,81 F
SLB16-D 8 M16 x 1,5 33 74 26 10 23 8 19 24 2,3 15 35 � 17,76 F
SLB20-A 10 M20 x 1,5 33 80 28 12 25 10 22 - 2,8 15 40 � 20,81 F
SLB20-B 10 M20 x 1,5 33 80 28 12 25 10 22 30 2,8 15 40 � 21,77 F
SLB20-C 10 M20 x 1,5 33 80 28 12 25 10 22 - 2,8 15 40 � 27,21 F
SLB20-D 10 M20 x 1,5 33 80 28 12 25 10 22 30 2,8 15 40 � 28,17 F
Part numberPrice each
1 to 5D D2 L L1 L2 L3 H SW1 SW2F x30°D1
initialF1 (N)
finalF2 (N)
Spring strengthStock*
*Depending on availability
Steel index boltPull to unlockSLB
MODEL AWithout lock nut
Without slot
Normal Retracted
MODEL CWithout lock nut
With slot
MODEL BWith lock nutWithout slot
MODEL DWith lock nut
With slot
L2
L3L1
L
H FD1
D2
SW1
SW2
SW1
SW2D
-0,02-0,04
6+-10%
20+On request
1+List
Qty.Disc.
DISCOUNTS
- Manual indexing bolt- Exists in 4 different versions- Materials:
Bolt: Glass reinforced polyamideBody: Blackened steel (class 5.8)Tip: Hardened steelSpring: Steel
- Working temp: -50°C to +130°C
.Uses.- Locating and indexing - Pull to retract locking pin.- Turn through 90° to retain
(Models C + D)
.Advantages.- Resists chemicals, weather and
hot lubricants
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 511HPC*Depending on availability
Stainless steel index boltPull to unlock SLBSS
MODEL AWithout lock nut
Without slot
MODEL CWithout lock nut
With slot
MODEL BWith lock nutWithout slot
MODEL DWith lock nut
With slot
L2
L3L1
L
H FD1
D2
SW1
SW2
SW1
SW2D
-0,02-0,04
Normal Retracted
stainless steel
6+-10%
20+On request
1+List
Qty.Disc.
DISCOUNTS
- Manual indexing bolt- Exists in 4 different versions- Materials:
Bolt: Glass reinforcedpolyamideBody: Stainless steel (1.4305 x10 CrNiS 18 9)Tip: Stainless steel (1.4304 x46 Cr13)Spring: Stainless steel (5.8)
- Working temp: -50° to +130°C
IUsesi- Locating and indexing - Pull to retract locking pin.- Turn through 90° to retain
(Models C + D)
iAdvantagesi- Resists chemicals, weather and
hot lubricants
SLB10-A/SS 5 M10 x 1,0 21 47 17 7 15 5 13 - 1,3 5 12SLB10-B/SS 5 M10 x 1,0 21 47 17 7 15 5 13 17 1,3 5 12SLB10-C/SS 5 M10 x 1,0 21 47 17 7 15 5 13 - 1,3 5 12SLB10-D/SS 5 M10 x 1,0 21 47 17 7 15 5 13 17 1,3 5 12SLB12-A/SS 6 M12 x 1,5 25 56 20 8 17 6 14 - 1,8 6 14SLB12-B/SS 6 M12 x 1,5 25 56 20 8 17 6 14 19 1,8 6 14SLB12-C/SS 6 M12 x 1,5 25 56 20 8 17 6 14 - 1,8 6 14SLB12-D/SS 6 M12 x 1,5 25 56 20 8 17 6 14 19 1,8 6 14SLB16-A/SS 8 M16 x 1,5 33 74 26 10 23 8 19 - 2,3 15 35SLB16-B/SS 8 M16 x 1,5 33 74 26 10 23 8 19 24 2,3 15 35SLB16-C/SS 8 M16 x 1,5 33 74 26 10 23 8 19 - 2,3 15 35SLB16-D/SS 8 M16 x 1,5 33 74 26 10 23 8 19 24 2,3 15 35SLB20-A/SS 10 M20 x 1,5 33 80 28 12 25 10 22 - 2,8 15 40SLB20-B/SS 10 M20 x 1,5 33 80 28 12 25 10 22 30 2,8 15 40SLB20-C/SS 10 M20 x 1,5 33 80 28 12 25 10 22 - 2,8 15 40SLB20-D/SS 10 M20 x 1,5 33 80 28 12 25 10 22 30 2,8 15 40
16,38 F
18,10 F
18,43 F
20,17 F
19,31 F
20,17 F
21,74 F
23,74 F
25,65 F
28,42 F
29,59 F
32,40 F
43,84 F
46,94 F
56,96 F
60,01 F
�
�
�
�
�
�
�
�
�
�
�
�
�
�
-�
Part numberPrice each
1 to 5D D2 L L1 L2 L3 H SW1 SW2F x30°D1
initialF1 (N)
finalF2 (N) Stock*
52 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Index bolt, weldablePull to releaseSLBW
6+-10%
20+On request
1+List
Qty.Disc.
DISCOUNTS
- Manual indexing button, smooth body, no flange
- Two versions available.- Material :
Body: Steel 1.0403 (suitable for welding)Pin: Hardened steel, Resistance class 5.Head: Dark grey thermosetting plastic
.Info..- Index bolts are used where lateral movement is
required to be blocked. Pulling the handle releasesthe pin. The M version allows the pin to be held inthe retained position.
- Bolts should be welded using a WIG inert gasprocess.
SLBW10-LSLBW10-MSLBW12-LSLBW12-MSLBW14-LSLBW14-MSLBW18-LSLBW18-MSLBW22-LSLBW22-M
4 10 18 38,5 21 4 1,0 6 124 10 18 38,5 21 4 1,0 6 125 12 21 43,5 24 5 1,3 5 125 12 21 43,5 24 5 1,3 5 126 14 25 51,7 28 6 1,8 6 146 14 25 51,7 28 6 1,8 6 148 18 33 68,0 36 8 2,3 15 358 18 33 68,0 36 8 2,3 15 35
10 22 33 74,0 40 10 2,8 15 4010 22 33 74,0 40 10 2,8 15 40
6,89 F
8,86 F
6,55 F
8,43 F
7,26 F
9,32 F
9,39 F
11,07 F
14,40 F
16,88 F
Part numberInitial Final
ØD ØD1 ØD2 L L1 H Fx30° (N) (N)Price each
1 to 5
Spring force
ØD
ØD1h9
ØD2
F
L
L1H
-0,02-0,04
“L” typewithoutretainingmechanism
ØD
ØD1h9
ØD2
F
L
L1H
-0,02-0,04
“M” typewithoutretainingmechanism
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 531HPC
Stainless steel Index bolt, weldablePull to release SLBWSS
- Manual indexing button, smooth body , noflange
- Two versions available.- Material :
Body: Stainless steel 303Pin: Hardened stainless steel 420Head: Dark grey thermosetting plastic
.Info..- Index bolts are used where lateral movement is
required to be blocked. Pulling the handle releasesthe pin. With the M version, the pin can be held inthe retained position.
- Bolts should be welded using a WIG inert gasprocess
SLBW10-L/SSSLBW10-M/SSSLBW12-L/SSSLBW12-M/SSSLBW14-L/SSSLBW14-M/SSSLBW18-L/SSSLBW18-M/SSSLBW22-L/SSSLBW22-M/SS
4 10 18 38,5 21 4 1,0 6 124 10 18 38,5 21 4 1,0 6 125 12 21 43,5 24 5 1,3 5 125 12 21 43,5 24 5 1,3 5 126 14 25 51,7 28 6 1,8 6 146 14 25 51,7 28 6 1,8 6 148 18 33 68,0 36 8 2,3 15 358 18 33 68,0 36 8 2,3 15 35
10 22 33 74,0 40 10 2,8 15 4010 22 33 74,0 40 10 2,8 15 40
11,98 F
15,04 F
11,17 F
14,32 F
12,71 F
16,33 F
16,88 F
19,93 F
26,70 F
31,34 F
Part numberInitial Final
ØD ØD1 ØD2 L L1 H Fx30° (N) (N)Price each
1 to 5
Spring force
ØD
ØD1h9
ØD2
F
L
L1H
-0,02-0,04
“L” typewithoutretainingmechanism
ØD
ØD1h9
ØD2
F
L
L1H
-0,02-0,04
“M” type with retainingmechanism
stainless steel
6+-10%
20+On request
1+List
Qty.Disc.
DISCOUNTS
54 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Stainless steel index boltSLBS Pull to unlock
Normalposition
Retractedposition
6+-10%
20+On request
1+Prix
Qty.Disc.
DISCOUNTS
- Locating bolt for manual indexing applications- Exists in 4 versions- Material:
Body: Stainless steel 303Pin: Hardened stainless steel 420
- Finish:Ground and blackenedMushroom headed button: Electropolished finish
.Info..- These locating bolts can
be used to restrict lateral movement.Raising the button releases the pin
Form AWithout slot,
without lock nut
Form BWithout slot,with lock nut
Form CWith slot,
without lock nut
Form DWith slot,
with lock nut
SW1
SW2
L
ØD1
SW1
SW2
L
ØD2
L1L1
L2L2
L3L3
HH FF
ØD1
ØD ØD
ØD2
-0,02-0,04
-0,02-0,04
SLBS8-A 4 M8 x 1,0 18 43,0 15 6 13 4 10 13 1,0SLBS8-B 4 M8 x 1,0 18 43,0 15 6 13 4 10 13 1,0SLBS8-C 4 M8 x 1,0 18 38,5 15 6 13 4 10 13 1,0SLBS8-D 4 M8 x 1,0 18 38,5 15 6 13 4 10 13 1,0SLBS10-A 5 M10 x 1,0 21 50,0 17 7 15 5 13 17 1,3SLBS10-B 5 M10 x 1,0 21 50,0 17 7 15 5 13 17 1,3SLBS10-C 5 M10 x 1,0 21 43,5 17 7 15 5 13 17 1,3SLBS10-D 5 M10 x 1,0 21 43,5 17 7 15 5 13 17 1,3SLBS12-A 6 M12 x 1,5 25 59,0 20 8 17 6 14 19 1,8SLBS12-B 6 M12 x 1,5 25 59,0 20 8 17 6 14 19 1,8SLBS12-C 6 M12 x 1,5 25 52,0 20 8 17 6 14 19 1,8SLBS12-D 6 M12 x 1,5 25 52,0 20 8 17 6 14 19 1,8SLBS16-A 8 M16 x 1,5 33 77,0 26 10 23 8 19 24 2,3SLBS16-B 8 M16 x 1,5 33 77,0 26 10 23 8 19 24 2,3SLBS16-C 8 M16 x 1,5 33 68,0 26 10 23 8 19 24 2,3SLBS16-D 8 M16 x 1,5 33 68,0 26 10 23 8 19 24 2,3SLBS20-A 10 M20 x 1,5 33 83,0 28 12 25 10 22 30 2,6SLBS20-B 10 M20 x 1,5 33 83,0 28 12 25 10 22 30 2,6SLBS20-C 10 M20 x 1,5 33 74,0 28 12 25 10 22 30 2,6SLBS20-D 10 M20 x 1,5 33 74,0 28 12 25 10 22 30 2,6
Price each 1 to 5ØD
ØD2 L L1 L2 L3 H SW1 SW2
F x30°ØD1
initialF1 (N)
finalF2 (N)
Spring strength
666655556666
1515151515151515
1212121212121212141414143535353540404040
18,06 F
19,90 F
21,70 F
23,76 F
17,17 F
18,99 F
20,68 F
22,64 F
20,28 F
22,29 F
24,45 F
26,69 F
26,89 F
29,75 F
33,21 F
36,37 F
45,95 F
49,17 F
63,98 F
67,38 F
�
�
---�
--�
�
�
�
�
�
�
�
-�
--
Partnumber
stainless steel
Stock*
*Depending on availability
Operatingelements
Disc handwheelpage 58
p.56 p.68 p.80 p.82
p.84
Handwheel Handle, harm and button
Small 6 lobe femalehandle
Ball knobs
Knurled thumbscrew
p.89 p.92
Mushroomheaded button
Indexing handle
p.100
Carrying handle
Stainlesssteel
Stainlesssteel
Stainlesssteel
Modifiable bore
56 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
VPRA50-MVPRA65-MVPRA80-MVPRA100-MVPRA125-MVPRA150-MVPRA200-MVPRA250-MVPRA300-M
506580
100125150200250300
232831354448586676
5055718599113143151161
111314141618212224
101315161820243035
162020243232404858
444466666
91010111313161718
202427293537444955
M6M6M6M8M8
M10M10M10M10
�������--
13,07 F
15,16 F
16,66 F
20,57 F
26,40 F
32,41 F
51,17 F
72,45 F
112,11 F
Part number ØD H L C B ØA Ød E F P ØNPrice each
1 to 5Stock*
*Depending on availability
13x2713x2717x4021x5023x5525x6528x8528x8528x85
Handwheel with handleVPRAM Thermosetting plastic
A
- Handwheel with handle for manual use- Pre-bored- Working temperature: -20°C to +140°C- Materials:
Wheel: thermosetting plasticHub: galvanised steelHandle: thermosetting plasticAxle: galvanised steel
.Options.- Different bore diameters- Keyway- See modification info on page 64
.Uses.- All types of machines C
E
F
Ød
ØN
H
B
ØD
P
L 20+On request
6+-5%
1+List
QtyDisc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 571HPC
VPRA50VPRA65VPRA80VPRA100VPRA125VPRA150VPRA200VPRA250VPRA300
050065080100125150200250300
232831354448586676
111314141618212224
101315161820243035
162020243232404858
444466666
091010111313161718
202427293537444955
8,05 F
9,57 F
10,71 F
14,60 F
19,39 F
24,79 F
41,98 F
61,64 F
104,09 F
Part number ØD H C B ØA Ød E FPrice each
1 to 5
Disc handwheelVPRAThermosetting plastic
A
- Handwheel with handle for manual use- Pre-bored- Working temperature: -20°C to +140°C- Materials:
Wheel: thermosetting plasticHub: galvanised steel
.Options.- Different bore diameters- Keyway- See modification info on page 64
.Uses.- All types of machine
C
E
F
Ød
H
B
ØD
20+On request
6+-5%
1+List
QtyDisc.
DISCOUNTS
58 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
SHA-100-PT 4 100 46 20 24 12 24 18 096 21 50 M6 � 15,77 F
SHA-125-PT 6 125 51 24 24 12 28 20 101 21 50 M6 � 19,04 F
SHA-160-PT 6 160 61 28 32 15 31 30 131 23 70 M8 � 24,72 F
SHA-200-PT 6 200 74 32 40 15 40 35 164 26 90 M10 � 35,52 F
Part numberPrice each
1 to 5Ød
Pre-bore ØD H C ØA E F ØK L ØG P ØN
*Depending on availability
Stock*
HandwheelWith revolving handleSHAPT
ØG
ØN
L
H
ØD
ØA
Ød
P
ØK
C
F
E
6+-5%
20+On request
1+List
QtyDisc.
DISCOUNTS
- Manual operating element- Materials:
Wheel: glass fibre reinforced polyamideHub: galvanised steel
.Options.- Different bore diameters - Keyways- See modification info on page 64
.Uses.- All types of machines
Great value
for money
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 591HPC
SHA-100-PTR 4 100 46 20 24 12 24 098 50 21 52 M4 � 37,10 F
SHA-125-PTR 6 125 51 24 24 12 28 103 54 21 52 M4 � 41,18 F
SHA-160-PTR 6 160 61 28 32 15 31 133 65 23 72 M5 � 46,73 F
SHA-200-PTR 6 200 74 32 40 15 40 166 79 26 92 M6 � 58,57 F
Part numberPrice each
1 to 5Ød
Pre-bore ØD H C ØA E F L L1 ØG P ØN
*Depending on availability
Stock*
HandwheelWith foldaway revolving handle SHAPTR
ØG
ØN
L
H
ØD
ØA
Ød
P
L1
C
F
E
6+-5%
20+On request
1+List
QtyDisc.
DISCOUNTS
- Manual operating element- Materials:
Wheel: glass fibre reinforced polyamideHub: galvanised steel
.Info..- Revolving handle folds away
for safety
.Options.- Different bore diameters - Keyways- See modification info on page 64
.Uses.- All types of machines
Great value
for money
60 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
SHA-100 4 100 46 20 24 12 24 18 � 10,63 F
SHA-125 6 125 51 24 24 12 28 20 � 12,46 F
SHA-160 6 160 61 28 32 15 31 30 � 18,43 F
SHA-200 6 200 74 32 40 15 40 35 � 27,90 F
Part numberPrice each
1 to 5Ød
Pre-bore ØD H C ØA E F ØKStock*
*Depending on availability
HandwheelWithout handleSHA
H
ØD
ØA
Ød
ØK
C
FE
6+-5%
20+On request
1+List
QtyDisc.
DISCOUNTS
- Manual operating element- Materials:
Wheel: glass fibre reinforced polyamideHub: galvanised steel
.Options.- Different bore diameters - Keyways- See modification info on page 64
.Uses.- All types of machines
Great value
for money
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 611HPC
V3RA-100-PT 4 100 46 20 24 12 24 18 096 21 50 M6 � 14,13 F
V3RA-125-PT 6 125 51 24 24 12 28 20 101 21 50 M6 � 16,37 F
V3RA-160-PT 6 160 61 28 32 15 31 30 131 23 70 M8 � 21,08 F
V3RA-200-PT 6 200 74 32 40 15 40 35 164 26 90 M10 � 29,22 F
Part numberPrice each
1 to 5Ød Pre-
bore ØD H C ØA E F ØK L ØG P ØN Stock*
*Depending on availability
3-spoked handwheel
ØG
ØN
L
H
ØD
ØA
Ød
P
ØK
C
F
E
- Manual operating element- Materials:
Wheel: glass fibre reinforced polyamideHub: galvanised steel
.Options.- Different bore diameters - Keyways- See modification info on page 64
.Uses.- All types of machines
With revolving handle V3RAPT
6+-5%
20+On request
1+List
QtyDisc.
DISCOUNTS
Great value
for money
62 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
V3RA-100-PTR 4 100 46 20 24 12 24 100 50 21 54 M4 � 33,41 F
V3RA-125-PTR 6 125 51 24 24 12 28 105 54 21 54 M4 � 36,89 F
V3RA-160-PTR 6 160 61 28 32 15 31 135 65 23 74 M5 � 41,90 F
V3RA-200-PTR 6 200 74 32 40 15 40 168 79 26 94 M6 � 50,12 F
Part numberPrice each
1 to 5Ød Pre-
bore ØD H C ØA E F L L1 ØG P ØN
*Depending on availability
Stock*
3-spoked handwheelWith revolving foldaway handleV3RAPTR
ØG
ØN
L
L1 H
ØD
ØA
Ød
P
K
C
F
E
6+-5%
20+On request
1+List
QtyDisc.
DISCOUNTS
- Manual operating element- Materials:
Wheel: glass fibre reinforced polyamideHub: galvanised steel
.Info..- Revolving handle folds away
for safety
.Options.- Different bore diameters - Keyways- See modification info on page 64
.Uses.- All types of machines
Great value
for money
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 631HPC
V3RA-100 4 100 46 20 24 12 24 18 � 8,55 F
V3RA-125 6 125 51 24 24 12 28 20 � 10,75 F
V3RA-160 6 160 61 28 32 15 31 30 � 15,17 F
V3RA-200 6 200 74 32 40 15 40 35 � 22,89 F
Part numberPrice each
1 to 5Ød Pre-
bore ØD H C ØA E F ØK
*Depending on availability
Stock*
3-spoked handwheel
H
ØD
ØA
Ød
ØK
C
F
E
- Manual operating element- Materials:
Wheel: glass fibre reinforced polyamideHub: galvanised steel
.Options.- Different bore diameters - Keyways- See modification info on page 64
.Uses.- All types of machines
Without handle V3RA
6+-5%
20+On request
1+List
QtyDisc.
DISCOUNTS
Great value
for money
64 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
V3RA-100-8 8-9-10-11-12-13-14 14,86 FV3RA-100-15 4 1815-16-17-18 15,69 F
V3RA-125-12 8-9-10-11-12-13-14 16,49 FV3RA-125-15 6 1815-16-17-18 17,35 F
V3RA-160-8 8-9-10-11-12-13-14 20,92 F
V3RA-160-15 6 24 15-16-17-18-19-20 21,75 F
V3RA-160-21 21-22-23-24 28,69 F
V3RA-200-8 8-9-10-11-12-13-14 28,64 F
V3RA-200-15 15-16-17-18-19-20 29,48 FV3RA-200-21 6 3221-22-23-24-25 36,40 F
V3RA-200-26 26-27-28-29-30 40,35 F
SHA-100-8 8-9-10-11-12-13-14 16,37 FSHA-100-15 4 1815-16-17-18 17,18 F
SHA-125-8 8-9-10-11-12-13-14 18,21 FSHA-125-15 6 1815-16-17-18 19,03 F
SHA-160-8 8-9-10-11-12-13-14 24,17 F
SHA-160-15 6 24 15-16-17-18-19-20 25,00 F
SHA-160-21 21-22-23-24 31,93 F
SHA-200-8 8-9-10-11-12-13-14 33,65 F
SHA-200-15 15-16-17-18-19-20 34,48 FSHA-200-21 6 3221-22-23-24-25 41,41 F
SHA-200-26 26-27-28-29-30 45,37 F
Part numberPrice each
1 to 5Ød
Pre -boreØD
Max. boreBore
HandwheelsModification of bores to suit your requirementsV3RA
SHA
ØD
Ød
.Info..It is possible to modify the bores of the V3RA and SHAhandwheels to suit your requirements. This is possiblefor versions without a handle, with a revolvinghandle and with a foldaway revolving handle.
Ordering exampleV3RA-125-PT-16: A 3 spoked handwheel withrevolving handle, external diameter 125mm and16mm bore diameter
6+-5%
20+On request
1+List
QtyDisc.
DISCOUNTS
Quick
delivery
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 651HPC
V3RA-100-8 4 14 5 16,3 8-9-10-11-12-13-14 14,86 F
V3RA-125-8 6 14 5 16,3 8-9-10-11-12-13-14 16,49 F
V3RA-160-8 8-9-10-11-12-13-14 20,92 FV3RA-160-15 6 20 6 22,815-16-17-18-19-20 21,75 F
V3RA-200-8 8-9-10-11-12-13-14 28,64 F
V3RA-200-15 15-16-17-18-19-20 29,48 FV3RA-200-21 6 28 8 31,321-22-23-24-25 36,40 F
V3RA-200-26 26-27-28 40,35 F
SHA-100-8 4 14 5 16,3 8-9-10-11-12-13-14 16,37 F
SHA-125-8 6 14 5 16,3 8-9-10-11-12-13-14 18,21 F
SHA-160-8 8-9-10-11-12-13-14 24,17 FSHA-160-15 6 20 6 22,815-16-17-18-19-20 25,00 F
SHA-200-8 8-9-10-11-12-13-14 33,65 F
SHA-200-15 15-16-17-18-19-20 34,48 FSHA-200-21 6 28 8 31,321-22-23-24-25 41,41 F
SHA-200-26 26-27-28 45,37 F
Part numberPrice each
1 to 5BoreØd
Pre-boreØD
Max. boreK
max. C 0/+0,1
HandwheelsModification of bores and keyways to suit your requirements V3RA
SHA
ØD K
C.Info..It is possible to modify the bores and keyways of theV3RA and SHA handwheels to suit your requirements.This is possible for versions without a handle, with arevolving handle and with a foldaway revolvinghandle
Ordering exampleV3RA-125-PT-14K: A 3 spoked handwheel withrevolving handle, external diameter 125mm, 14mmbore diameter and 5mm standardised keyway
6+-5%
20+On request
1+List
QtyDisc.
DISCOUNTS
Quick
delivery
66 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
HLUT80-10KHLUT100-10KHLUT125-12KHLUT140-14KHLUT160-14KHLUT180-16KHLUT200-18K
HLUT250-22KHLUT315-26KHLUT400-30KHLUT500-34K
HLUT80-10HLUT100-10HLUT125-12HLUT140-14HLUT160-14HLUT180-16HLUT200-18
HLUT250-22HLUT315-26HLUT400-30HLUT500-34
80100125140160180200
250315400500
10101214141618
22263034
24262830323538
45536578
16171819202224
28333845
29333639404345
50566372
3345556
688
10
11,411,413,816,316,318,320,8
24,829,333,337,3
����-��
----
----���
�---
Ø16xM6x54,5Ø16xM6x54,5Ø20xM8x67,0Ø20xM8x67,0Ø25xM10x83,0Ø25xM10x83,0Ø25xM10x83,0
Ø32xM12x105,5Ø32xM12x105,5Ø36xM16x117,0Ø36xM16x117,0
33,06 F
35,25 F
42,46 F
47,36 F
55,46 F
63,97 F
71,76 F
107,70 F
146,95 F
243,00 F
379,19 F
30,60 F
31,80 F
38,63 F
43,32 F
52,58 F
61,02 F
68,26 F
103,70 F
142,84 F
238,33 F
369,90 F
Part numberwith without
keyway keyway ØD1ØD2(H7) ØD3 L1 L3
B3(P9) T
Revolvinghandle
Price each 1 to 5with without
keyway keywaywith without
keyway keywayWith 3 spokes
With 5 spokes
Stock*
*Depending on availability
Spoked handwheel with revolving handleAluminiumHLUT
- Handwheel with revolving handle- Materials:
Wheel: aluminiumHandle: aluminium with steel axle
- Finish: edges machined and polished- Keyway conforms to DIN6885-1
.Advantages.- Light
.Options.- Handwheel without handle HLU
L1
ØD3ØD3
B3
L3
ØD1
ØD2
ØD2
Keyway
T
large diameter
1+List
6+-5%
15+-10%
20+On request
QtyDisc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 671HPC
HLU80-10KHLU100-10KHLU125-12KHLU140-14KHLU160-14KHLU180-16KHLU200-18K
HLU250-22KHLU315-26KHLU400-30KHLU500-34K
HLU80-10HLU100-10HLU125-12HLU140-14HLU160-14HLU180-16HLU200-18
HLU250-22HLU315-26HLU400-30HLU500-34
80100125140160180200
250315400500
10101214141618
22263034
24262830323538
45536578
16171819202224
28333845
29333639404345
50566372
3345556
688
10
11,411,413,816,316,318,320,8
24,829,333,337,3
-���--�
----
--�----
�---
15,99 F
17,51 F
21,50 F
25,16 F
29,46 F
34,97 F
42,75 F
69,08 F
108,14 F
198,13 F
331,21 F
13,64 F
14,91 F
18,69 F
22,32 F
26,45 F
31,92 F
39,50 F
64,85 F
103,98 F
191,91 F
323,46 F
Part numberwith without
keyway keyway ØD1ØD2(H7) ØD3 L1 L3
B3(P9) T
Price each 1 to 5with without
keyway keywayWith 3 spokes
With 5 spokes
*Depending on availability
with withoutkeyway keyway
Stock*
Spoked handwheel without handleAluminium HLU
L1
ØD3ØD3
B3
L3
ØD1
ØD2
ØD2
Keyway
T
- Handwheel- Material: aluminium- Finish: edges machined and polished- Keyway conforms to DIN6885-1
.Advantages.- Light
.Options.- A version with a handle exists, see HLUT
large diameter
1+List
6+-5%
15+-10%
20+On request
QtyDisc.
DISCOUNTS
68 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Cylindrical revolving handleMEP
- Cylindrical revolving handle withhexagonal blocking insert
- Operating elements- Material:
Body: Black glass fibre reinforcedpolyamideThreaded shaft: Plated steel orstainless steel
Technopolymer with steel or stainless steel shaft
ØD
0,4
ØA
E L G
10+-5%
20+-10%
50+-15%
100+On request
1+List
Qty.Disc.
DISCOUNTS
MEP21-50MEP23-70MEP26-90
21 50 M6 13 323 70 M8 14 426 90 M10 17 5
16,89 F
18,68 F
21,21 F
Part numberSteel Stainless steel ØA L ØD E G
Price each 1 to 9Steel Stainless steel
MEP21-50/SSMEP23-70/SSMEP26-90/SS
5,73 F
6,58 F
7,47 F
���
Stock*Steel
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 691HPC
Folding cylindrical revolving handlePGRTechnopolymer with steel
or stainless steel shaft- Folding cylindrical revolving handle
with release mechanism- Operating elements- Material:
Body: Black glass fibre reinforcedpolyamideMechanism: Chromed steel orstainless steel
PGR21-50PGR23-70PGR26-90
21 69 19 7 8 M5 2,5 6,3 4 16,5 50 66,523 92 21 8 8 M6 2,5 7,5 4 16,5 70 86,526 114 24 8 10 M6 2,5 7,5 4 20,0 90 110,0
61,92 F
62,43 F
68,93 F
Part numberSteel Stainless steel ØA H S ØD N ØM Ød G F E B L
Price each 1 to 9Steel Stainless steel
PGR21-50/SSPGR23-70/SSPGR26-90/SS
29,84 F
30,19 F
35,39 F
ØM
G
ØA
ØD
Ød
E
B L
H
N S
10+-5%
20+-10%
50+-15%
100+On request
1+List
Qty.Disc.
DISCOUNTS
70 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Arm with rotating handleTechnopolymerMHMEP
10+-5%
20+-10%
50+-15%
100+On request
1+List
Qty.Disc.
DISCOUNTS
- Arm with rotating handle- Operating elements- Material:
Black glass fibre reinforced polyamideMatt surface finish
.Options.- Alternative bores on request- Industry standard keyways available
MH65-MEPMH80-MEPMH100-MEPMH130-MEPMH160-MEP
65 87 18 27 10 33 4 21X50 M680 105 22 30 10 36 4 21X50 M6
100 128 24 34 10 40 4 23X70 M8130 162 28 40 14 49 6 26X90 M8160 196 34 45 15 55 6 26X90 M10
14,72 F
16,76 F
19,19 F
27,04 F
34,23 F
Part number G L ØA ØD E H Ød MEP nPrice each
1 to 9Prebored
ØD
ØA
L
G
Ød
n
ME
P
E
H
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 711HPC
Arm with rotating handleSquare bore, technopolymer MHQMEP
10+-5%
20+-10%
50+-15%
100+On request
1+List
Qty.Disc.
DISCOUNTS
- Arm with rotating handle and a squarethrough-bored hole
- Operating elements- Material:
Black glass fibre reinforced polyamideMatt surface finish
.Options.- Alternative bores on request- Industry standard keyways available
MHQ65-MEPMHQ80-MEPMHQ100-MEPMHQ130-MEPMHQ160-MEP
15,38 F
17,17 F
20,38 F
27,33 F
35,45 F
Part numberPrice each
1 to 965 87 18 27 23 8x8 20 16 21x50 M680 105 22 30 26 10x10 22 19 21x50 M6
100 128 24 34 30 12x12 27 22 23x70 M8130 162 28 40 35 14x14 30 25 26x90 M8160 196 34 45 40 17x17 34 28 26x90 M10
G L ØA ØD H T B C MEP n
ØD
ØA
L
G
C
n
H
ME
P
B
T
72 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
10+-5%
20+-10%
50+-15%
100+On request
1+List
Qty.Disc.
DISCOUNTS
Arm with rotating handleFolding handle, technopolymerMHPGR
- Arm with folding rotating handle- Operating elements- Material:
Black glass fibre reinforced polyamideMatt surface finish
.Options.- Alternative bores on request- Industry standard keyways available
MH80-PGRMH100-PGRMH130-PGRMH160-PGR
80 105 55 22 30 10 36 4 21x50 M5100 128 63 24 34 10 40 4 23x70 M6130 162 74 28 40 14 49 6 23x70 M6160 196 86 34 45 15 55 6 26x90 M6
48,41 F
49,04 F
57,10 F
63,63 F
Part number G L L1 ØA ØD E H Ød PGR nPrice each
1 to 9Prebored
ØD
L
G
Ød
n
H
PG
R
EØA
L1
74 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Female knurled knob
10+-20%
50+-40%
200+On request
1+List
Qty.Disc.
DISCOUNTS20+
-30%100+-50%
TYPE 1712-019
TYPE 4712-031712-032712-033
M6
M4M5M6
23
121517
14
141622
5,50
---
10
1010
9
12
101212
�
���
2,85 F
2,80 F
3,82 F
4,36 F
Part numberThread
ØT ØD H H1 L ØAPrice each
1 to 9Stock*
*Depending on availability
Threads M4-M8712
LH1
ØA
ØT
H
ØD- Operating elements- With brass insert - Working temperature: -30°C to +140°C- Material: black phenolic plastic
Type 1
A
ØT
L
H
D
Type 4
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 751HPC
Male knurled knob
10+-20%
50+-40%
200+On request
1+List
Qty.Disc.
DISCOUNTS20+
-30%100+-50%
TYPE 1712-015712-016712-017
TYPE 2712-020
TYPE 4712-018
M4M5M6
M4
M6
202025
10
20
182226
15
23
121313
8
12
6,507,007,00
4
3,50
101215
10
12
���
�
�
2,80 F
2,11 F
2,50 F
1,25 F
1,97 F
Part numberThread
ØT L ØD H H1 ØAPrice each
1 to 9Stock*
*Depending on availability
Threads M4-M6 712
H1
ØA
ØT
L
H
ØDØD
H1
ØAL
ØT
H
- Operating elements- With threaded steel insert- Working temperature:
30°C to +140°C- Material: black phenolic plastic
ØD
H1L
ØT
H
TYPE 1 TYPE 2With slot for screwdriver
TYPE 4
ØA
Type 1 Type 2
Type 4
76 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Valve wheel
10+-20%
50+-40%
200+On request
1+List
Qty.Disc.
DISCOUNTS20+
-30%100+-50%
712-051712-052
5063
1820
1212
2222
Square 6,5 x 6,5Square 8 x 8
��
3,18 F
4,36 F
Part number ØD H L ØA TPrice each
1 to 9
*Depending on availability
Stock*
With square bore712
ØD
ØA
L
H
- Operating elements- Working temperature: -30°C to +140°C- Material: black phenolic plastic
T
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 771HPC
M4M5M6M8M10
10,010,015,020,030,0
1012141621
2025324050
1716202532
�����
SK4MSK10MSK15MSK20MSK30M
3,23 F
1,84 F
1,93 F
2,95 F
4,74 F
Part numberThread
ØT L ØA ØD HPrice each
1 to 9
M4M5M6M8M10
8,09,0
13,516,021,0
1012141621
2025324050
1716202532
�����
SK4FSK10FSK15FSK20FSK30F
2,42 F
2,42 F
2,23 F
3,48 F
4,79 F
Male
Female
Stock*
*Depending on availability
Male or female star knobThreads M4-M10 SKM
SKF
ØDHL
ØA
ØTØT
H
L
ØA
MALE FEMALE
- With male or female threaded insert- Material: black phenolic plastic- Working temperature: -30°C to +140°C
.Advantages.- Better grip
10+-20%
50+-40%
200+On request
1+List
Qty.Disc.
DISCOUNTS20+
-30%100+-50%
78 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Female wing knobTechnopolymer with brass insertGGB
10+-5%
20+-10%
50+-15%
100+-20%
200+On request
1+List
Qty.Disc.
DISCOUNTS
- Female wing knob with tapped hole(blind or fully threaded)
- For manual tightening- Material:
Matt black polyamide with brass insert
.Info..- Not sold individually, please contact us
for details
with brassinsert
Ød
ØD
A
0,3
H
C
B
F
Knob with blind threadGGB34-M6GGB34-M8GGB40-M6GGB40-M8GGB48-M6GGB48-M8Knob, fully threadedGGB34-M6/FPGGB40-M6/FPGGB40-M8/FPGGB48-M6/FPGGB48-M8/FP
34 14 18 M6 - 9 434 14 18 M8 - 9 440 15 19 M6 - 9 440 15 19 M8 - 9 448 17 20 M6 - 13 448 17 20 M8 - 13 4
34 14 18 M6 7 15 440 15 19 M6 9 15 440 15 19 M8 9 15 448 17 20 M6 9 15 448 17 20 M8 9 15 4
��----
�����
1,68 F
1,68 F
1,76 F
1,76 F
1,84 F
1,84 F
1,84 F
1,88 F
1,88 F
1,97 F
1,97 F
Part number A B C ØD Ød H FPrice each
1 to 9Stock*
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 791HPC
Male wing knobTechnopolymer, with brass insert GGP
10+-5%
20+-10%
50+-15%
100+-20%
200+On request
1+List
Qty.Disc.
DISCOUNTS
- Male wing knob- For manual tightening- Material:
Matt black polyamideThreaded shaft: zinc plated steel
.Info..- Not sold individually, please
contact us for details
ØD
A
L
0,3
C
B
F
GGP34-M6-25GGP34-M8-25GGP40-M8-25GGP48-M8-25GGP48-M8-40
34 14 18 M6 25 434 14 18 M8 25 440 15 19 M8 25 448 17 20 M8 25 448 17 20 M8 40 4
�����
1,84 F
1,97 F
2,14 F
2,51 F
2,55 F
Part number A B C ØD L FPrice each
1 to 9Stock*
*Depending on availability
80 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
A
Ød
ØD
B
E
F
C
Small 6 lobe female handleTechnopolymer, with brass insertGLB
10+-5%
20+-10%
50+-15%
100+-20%
200+On request
1+List
Qty.Disc.
DISCOUNTS
- Small 6 lobe handle with afemale tapped insert (blind orfully threaded)
- Material :Matt black polyamide withbrass insert
.Option.- Stainless steel or polyamide
colored insert on quantities
.Info..- Not sold individually,
please contact us for details
GLB30-M6GLB30-M8GLB40-M6GLB40-M8GLB50-M8GLB50-M10GLB60-M12GLB70-M12GLB70-M14GLB70-M16
30304040505060707070
14141616181820232323
24242828323236404040
15151818202022242424
M6M8M6M8M8M10M12M12M14M16
13131313151618182020
----------
�-��-�-�--
--�--��---
2,14 F
2,27 F
2,51 F
2,51 F
2,94 F
3,15 F
4,24 F
5,29 F
6,59 F
7,06 F
Part number A B C F ØD E ØdPrice each
1 to 9
Handle, fully threaded
Handle, blind thread
GLB30-M6/FPGLB30-M8/FPGLB40-M6/FPGLB40-M8/FPGLB50-M8/FPGLB50-M10/FPGLB60-M12/FPGLB70-M12/FPGLB70-M14/FPGLB70-M16/FP
2,65 F
2,89 F
3,23 F
3,44 F
4,15 F
4,28 F
5,71 F
7,10 F
8,65 F
10,08 F
30304040505060707070
14141616181820232323
24242828323236404040
15151818202022242424
M6M8M6M8M8M10M12M12M14M16
11111515181825252525
8107
11111113141517
Stock*
*Depending on availability
with female
tappedinsert
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 811HPC
Small 6 lobe male knobTechnopolymer, with steel insert GLP
10+-5%
20+-10%
50+-15%
100+-20%
200+On request
1+List
Qty.Disc.
DISCOUNTS
- Small 6 lobe male handle with steel stud
- Material :Matt black polyamideStud: zinc plated steel
.Option.- Stainless steel or polyamide
colored insert on quantities
ØA
ØDB
C
FL
GLP30-M6-20GLP30-M6-30GLP30-M8-20GLP30-M8-30GLP40-M8-20GLP40-M8-30GLP40-M8-40GLP50-M10-20GLP50-M10-30GLP50-M10-40GLP60-M12-30GLP60-M12-50GLP70-M12-30GLP70-M12-50
3030303040404050505060607070
1414141416161618181820202323
2424242428282832323236364040
1515151518181820202022222424
M6M6M8M8M8M8M8M10M10M10M12M12M12M12
2030203020304020304030503050
-�-����-��--�-
1,97 F
2,14 F
2,14 F
2,18 F
2,39 F
2,43 F
2,51 F
3,32 F
3,40 F
3,48 F
5,67 F
6,17 F
6,17 F
6,59 F
Part number ØA B C F ØD LPrice each
1 to 9Stock*
*Depending on availability
82 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Threaded spherical knobTechnopolymerGPB
- Spherical knob with mouldedthread or brass insert
- Small central groove- Material :
Black Duroplast with brass insert
.Option.- Stainless steel or
polyamide colored insert on quantities
.Info..- Not sold individually,
please contact us for details
GPB19-M4GPB19-M5GPB19-M6GPB25-M6GPB25-M8GPB32-M8GPB32-M10GPB32-M12GPB41-M10GPB41-M12GPB47-M14
1,53 F
1,53 F
1,53 F
1,70 F
1,70 F
1,88 F
1,88 F
1,88 F
2,48 F
2,48 F
3,34 F
Part number Price each
1 to 9
Threaded insert
Moulded thread
GPB19-M6/INSGPB25-M8/INSGPB32-M8/INSGPB32-M10/INSGPB41-M10/INSGPB41-M12/INS
2,42 F
2,54 F
2,61 F
2,89 F
3,81 F
4,44 F
ØD ØD
ØB ØB
A
A
GPB GPB/INS
Brass insert
Mouldedthread
10+-5%
20+-10%
50+-15%
100+-20%
200+On request
1+List
Qty.Disc.
DISCOUNTS
19 10 M419 10 M519 10 M625 17 M625 17 M832 20 M832 20 M1032 20 M1241 20 M1041 20 M1247 23 M14
-���-�--��-
���-��
ØD A ØB
19 9 M625 15 M832 15 M832 16 M1041 16 M1041 18 M12
Stock*
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 831HPC
Ball knobs
712-001712-002712-003712-004712-005712-006
712-007712-008712-009712-010
M3M4M4M5M6M8
M4M5M6M8
10,0012,0016,0020,0025,0032,00
16,0020,0025,0032,00
09,5011,0015,0018,0022,5029,00
15,0018,0022,5029,00
05,5507,5007,5010,5013,5016,00
07,5010,5013,5016,00
������
����
1,44 F
1,44 F
1,53 F
1,64 F
1,93 F
2,50 F
1,93 F
1,84 F
2,42 F
3,48 F
Part numberThread
ØT ØD H LPrice each
1 to 9
With moulded thread
With threaded insert
Stock*
*Depending on availability
Smooth bored or female threads M3-M8 712
H
With moulded thread With threaded insert
L
ØD
- Operating elements- Working temperature: -30°C to +140°C- Materials: black phenolic plastic
10+-20%
50+-40%
200+On request
1+List
Qty.Disc.
DISCOUNTS20+
-30%100+-50%
84 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Part number ØD1 ØD2 ØD3 H K LPrice each
1 to 5Stock*
*Depending on availability
2,27 F
2,50 F
2,74 F
2,78 F
3,31 F
3,99 F
5,96 F
4,64 F
8,37 F
6,81 F
10,59 F
11,47 F
10,90 F
16,11 F
18,12 F
Stainless steel knurled thumb screwThreads M4-M10VMS
- Material: Polished stainless steel 303- Operating elements- Conforms to DIN 464- ** These thumb screws are supplied with
shaft threaded along the entire length (nogroove)
LK
RpRp
H
ØD2 ØD1ØD3
6+-10%
40+-20%
101+On request
1+List
Qty.Disc.
DISCOUNTS20+
-15%60+
-25%
stainless steel
VMS4-10 M4 16 8 9,5 3,5 10 �VMS4-16 M4 16 8 9,5 3,5 16 �VMS4-20 M4 16 8 9,5 3,5 20** �VMS5-10 M5 20 10 11,5 4,0 10 �VMS5-16 M5 20 10 11,5 4,0 16 �VMS5-20 M5 20 10 11,5 4,0 20** �VMS6-10 M6 24 12 15,0 5,0 10 �VMS6-16 M6 24 12 15,0 5,0 16 �VMS6-20 M6 24 12 15,0 5,0 20 �VMS6-25 M6 24 12 15,0 5,0 25** �VMS8-16 M8 30 16 18,0 6,0 16 �VMS8-20 M8 30 16 18,0 6,0 20 �VMS8-25 M8 30 16 18,0 6,0 25 �VMS10-20 M10 36 20 23,0 8,0 20 �VMS10-25 M10 36 20 23,0 8,0 25 �
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 851HPC
High versionEMS-3H M3 12 6 7,5 2,5 �EMS-4H M4 16 8 9,5 3,5 �EMS-5H M5 20 10 11,5 4,0 �EMS-6H M6 24 12 15,0 5,0 �EMS-8H M8 30 16 18,0 6,0 �EMS-10H M10 36 20 23,0 8,0 �EMS-12H M12 36 20 23,0 8,0 �Low versionEMS-4B M4 16 8 4,0 3,5 �EMS-5B M5 20 10 5,0 4,0 �EMS-6B M6 24 12 6,0 5,0 �EMS-8B M8 30 16 8,0 6,0 �EMS-10B M10 36 20 10,0 8,0 �EMS-12B M12 36 20 10,0 8,0 �
Part number ØD1 ØD2 ØD3 H KPrice each
1 to 5Stock*
*Depending on availability
0,97 F
1,46 F
1,71 F
2,66 F
5,80 F
9,41 F
15,90 F
1,13 F
1,50 F
2,36 F
5,70 F
10,22 F
13,43 F
Stainless steel knurled thumb nutThreads M3-M12 EMSH
EMSB- Solid knurled nut- Material: stainless steel 18.9- Conforms to DIN 466
K
Tall version EMS-H
Low version EMS-B
K
H
H
ØD2
ØD2
ØD1
ØD1
ØD3
ØD3
stainless steel
stainless steel
6+-10%
40+-20%
101+On request
1+List
Qty.Disc.
DISCOUNTS20+
-15%60+
-25%
86 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
1) Tilt, and slide down. 2) Level and tighten orloosen.
3) Tilt, and slide back up.
7,24 F
7,82 F
10,11 F
11,09 F
13,93 F
EMR-5EMR-6EMR-8EMR-10EMR-12
M5M6M8
M10M12
2024303640
1416202832
5,26,28,2
10,312,3
1214172024
810121416
253875
130185
�����
Part number ØD1 ØD2 ØD3 ØD4 H KWeight
(g)Price each
1 to 5Stock*
*Depending on availability
Fast-locking knurled nutThreads M5-M12EMR
- For use in applications that do not requirevery tight fastening
- Material: hardened steel- Finish: hardened and blackened
Threaded rodshould be longerthan dimension“H”
3,2
ØD3
H
K
ØD2ØD1
ØD4
mmoorree ssttoocckk
6+-10%
40+-20%
101+On request
1+List
Qty.Disc.
DISCOUNTS20+
-15%60+
-25%
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 871HPC
22,82 F
28,07 F
38,60 F
45,60 F
63,24 F
Part numberPrice each
1 to 5ØF ØD ØD1 H H1 GVML6-27 M6 27 15 30 10,0 10VML8-33 M8 33 19 43 11,0 20VML8-40 M8 40 21 47 15,0 20VML10-50 M10 50 25 63 17,5 30VML12-60 M12 60 27 77 20,0 40
�����
Stock*
Stainless steel hexagonal headed thumb screwThreads M6-M12 VML
- One piece construction- Operating elements- Material: stainless steel 304- Finish: polished
.Advantages.- Does not retain dirt or dust
.Applications.- Chemical, pharmaceutical and food
industries
Solid stainless steel
*Depending on availability
1+List
6+-5%
10+-10%
25+On request
Qty.Disc.
DISCOUNTS
ØD1
ØD
HH1
ØF
G
Polished
finish
newdiscounts
88 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
EML5-27 M5 27 15 19 10,0 10 19,63 F
EML6-33 M6 33 19 23 12,0 12 24,63 F
EML8-40 M8 40 21 27 15,0 13 30,70 F
EML10-50 M10 50 25 33 17,5 17 40,36 F
EML12-60 M12 60 27 37 20,0 20 52,68 F
Part numberPrice each
1 to 5ØF ØD ØD1 H H1 G-���-
Stock*
Stainless steel hexagonal headed thumb nutThreads M5-M12EML
- One piece construction- Material: stainless steel 304- Finish: polished
.Advantages.- Does not retain dirt or dust
ØF
ØD1
ØD
H1
H
G
Polished
finish
1+List
6+-5%
10+-10%
25+On request
QtyDisc.
DISCOUNTS
*Depending on availability
Solid stainless steel
newdiscounts
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 891HPC
BCH3-18/SSBCH4-21/SSBCH5-21/SSBCH6-25/SSBCH8-33/SS
M3M4M5M6M8
1821212533
1012121418
1821212533
8,610,010,012,016,0
7,510,012,512,016,0
8,54 F
9,33 F
9,33 F
10,39 F
15,18 F
Part number ØD ØD1 ØD2 H H1 TPrice each
1 to 9
Mushroom headed button
- Suitable for linear (push/pull)operations
- Material: Stainless steel 303Finish: Electrolytically polish
10+-10%
1+List
QtyDisc.
DISCOUNTS
BCHSSThreads M3-M8
20+-20%
50+On request
ØD1
ØD
ØD2
T
H
H1
stainless steelEconomical range
90 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
MAN8-20P Polished 22,47 FMAN8-20S Sand blasted 17,62 F
Part numberPrice each
1 to 5Finish Stock*
��
Stainless steel leverThread M8MAN
- Choice of two surface finishes- Material: Stainless steel 304
.Advantages.- Does not retain dirt or dust
.Applications.- Chemical, pharmaceutical and food
industries
Ø6,3
M8
Ø14
10,4
Ø20
105
Polished finished
Sand blasted finish
Solid stainless steel
Solid stainless steel
1+List
6+-5%
10+-10%
25+On request
Qty.Disc.
DISCOUNTS
newdiscounts
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 911HPC
712-026712-027712-028
M6M8M10
303950
263935
13,5016,0021,00
151823
���
3,82 F
4,36 F
6,30 F
Part numberThread
ØT ØD H L ØAPrice each
1 to 9
712-024712-025
M6M8
2030
1218
3045
13,5015,00
��
2,95 F
4,20 F
Part numberThread
ØT ØD ØD1 H LPrice each
1 to 9
Stock*
Stock*
*Depending on availability
Mushroom headed knobsFemale threads M6-M10 712
ØD
L
ØT
ØA
H
- Suitable for linear (push/pull)operations
- With threaded female steel insert- Working temperature:
-30°C to +140°C- Material: black phenolic plastic
712ØD
H
L
ØT
ØD1
- Suitable for use with handwheels- With moulded thread- Working temperature: -30°C to +140°C- Material: black phenolic plastic
Female threads M6+M8
10+-20%
50+-40%
200+On request
1+List
Qty.Disc.
DISCOUNTS20+
-30%100+-50%
10+-20%
50+-40%
200+On request
1+List
Qty.Disc.
DISCOUNTS20+
-30%100+-50%
Revolving knob
92 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
PCLA01M4PCLA01M5PCLA01M6PCLA02M6PCLA02M8PCLA03M8PCLA03M10PCLA04M10PCLA04M12PCLA05M12PCLA05M16
M4M5M6M6M8M8M10M10M12M12M16
999
1212141417172323
10,010,010,013,513,516,016,019,019,023,023,0
13,013,013,018,018,021,521,525,525,530,030,0
24,524,524,528,528,537,037,043,043,049,049,0
4,04,04,06,56,5
10,010,010,010,012,012,0
15,015,015,017,517,524,024,026,026,033,033,0
Partnumber
ThreadX T ØD ØD1 H H1 H2
30,030,030,041,541,553,553,561,061,072,072,0
33,533,533,545,545,558,058,066,066,077,077,0
404040656580809595
110110
47,047,047,075,075,091,591,5
109,0109,0126,0126,0
7,57,57,59,59,5
11,011,013,013,015,515,5
--�-�������
----�------
7,13 F7,13 F7,13 F8,47 F8,47 F
10,38 F10,38 F13,23 F13,23 F15,99 F15,99 F
-11,13 F11,13 F13,10 F13,10 F16,12 F16,12 F23,30 F23,30 F28,08 F28,08 F
PCLA01M4PCLA01M5PCLA01M6PCLA02M6PCLA02M8PCLA03M8PCLA03M10PCLA04M10PCLA04M12PCLA05M12PCLA05M16
-PCLA01M5SSPCLA01M6SSPCLA02M6SSPCLA02M8SSPCLA03M8SSPCLA03M10SSPCLA04M10SSPCLA04M12SSPCLA05M12SSPCLA05M16SS
Part numberSteel Stainless H3 H4 A A1 B Steel StS Steel Stainless
Price each1 to 5Stock*
*Depending on availability
Clamp lever with threaded insert
A1 B
PlasticPCLAMPCLAMSS- Control lever with threaded insert- Materials:
Insert: steel (class 5.8) or stainless steel (303)Handle: glass fibre reinforced polyamide plasticMechanism: splined diecast zinc
- Finish: Blackened steel- Color : black
.Uses.- The lever is normally in a locked position- Raise the handle to release the lever and
turn to required position- When handle is released, lever will
automatically lock in new position
.Info..- H4 = clearance height required for handle
H
XØD
ØD1
A
H3
T
H1
H2
H420°
6+-10%
20+On request
1+List
Qty.Disc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 931HPC
M5M6M8
M10M10M10M12M12M16
4,04,06,56,5
10,010,010,012,012,0
505060606090909090
2550606060-
60-
60
10,010,013,513,516,019,019,023,023,0
13,013,018,018,021,525,525,530,030,0
24,524,528,528,537,043,043,049,049,0
Part number Threadedbolt X H1 Steel StS ØD ØD1 H
LSteel Stainless
PCLA01T5SSPCLA01T6SSPCLA02T8SSPCLA02T10SSPCLA03T10SS
-PCLA04T12SS
-PCLA05T16SS
PCLA01T5PCLA01T6PCLA02T8PCLA02T10PCLA03T10PCLA04T10PCLA04T12PCLA05T12PCLA05T16
40406565809595
110110
15,015,017,517,524,026,026,033,033,0
30,030,041,541,553,561,061,072,072,0
33,533,545,545,558,066,066,077,077,0
47,047,075,075,091,5
109,0109,0126,0126,0
7,57,59,59,5
11,013,013,015,515,5
�-�����--
�����-�--
11,93 F12,81 F15,30 F15,30 F18,99 F
-27,73 F
-32,83 F
8,66 F8,66 F
10,11 F10,11 F12,46 F16,48 F16,48 F20,41 F20,41 F
Part numberA H2 H3 H4 A1 B Steel StSSteel Stainless
Price each 1 to 5
Steel StainlessPCLA01T5SSPCLA01T6SSPCLA02T8SSPCLA02T10SSPCLA03T10SS
-PCLA04T12SS
-PCLA05T16SS
PCLA01T5PCLA01T6PCLA02T8PCLA02T10PCLA03T10PCLA04T10PCLA04T12PCLA05T12PCLA05T16
Stock*
*Depending on availability
Clamp lever
A1B
Plastic PCLATPCLATSS
- Clamp lever with male thread andreduced tip according to DIN 78
- Materials:Insert: steel (class 5.8) or stainless steel(303)Handle: glass fibre reinforced polyamide plasticMechanism: splined diecast zinc
- Finish: Blackened steel, fine grained surface
- Matte surface with fine grains- Colour: black- Working temp.: –50°C to +130°C
.Uses.- The lever is normally in a locked position- Raise the handle to release the lever and
turn to required position- When handle is released, lever will
automatically lock in new position
.Info..- H4 = clearance height required for handle
H
XØD
ØD1
A
H3
L H1
H2
H420°
6+-10%
20+On request
1+List
Qty.Disc.
DISCOUNTS
94 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
CLB01M4CLB01M5CLB01M6CLB02M6CLB02M8CLB03M8CLB03M10CLB04M10CLB04M12CLB05M12CLB05M16
M4M5M6M6M8M8M10M10M12M12M16
999
1212141417172323
10,010,010,013,513,516,016,019,019,023,023,0
13,013,013,018,018,021,521,525,525,530,030,0
14,514,514,519,519,523,023,027,527,532,532,5
24,524,524,528,528,537,037,043,043,049,049,0
4,04,04,06,56,5
10,010,010,010,012,012,0
15,015,015,017,517,524,024,026,026,033,033,0
Partnumber
ThreadX T ØD ØD1 ØD2 H H1 H2
30,030,030,041,541,553,553,561,061,072,072,0
33,533,533,545,545,558,058,066,066,077,077,0
404040656580809595
110110
47,047,047,075,075,091,591,5
109,0109,0126,0126,0
7,57,57,59,59,5
11,011,013,013,015,515,5
1616162020222224242626
�����������
---�----�--
10,11 F10,11 F10,11 F12,76 F12,76 F13,95 F13,95 F15,78 F15,78 F19,58 F19,58 F
-14,15 F14,15 F17,55 F17,55 F19,93 F19,93 F25,91 F25,91 F31,55 F31,59 F
CLB01M4CLB01M5CLB01M6CLB02M6CLB02M8CLB03M8CLB03M10CLB04M10CLB04M12CLB05M12CLB05M16
-CLB01M5SSCLB01M6SSCLB02M6SSCLB02M8SSCLB03M8SSCLB03M10SSCLB04M10SSCLB04M12SSCLB05M12SSCLB05M16SS
Part numberSteel Stainless H3 H4 A A1 B
N° ofteeth Steel Stainless Steel Stainless
Price each1 to 5Stock*
*Depending on availability
Clamp leverDiecast zincCLBM
CLBMSS
ØD2
A1B
H
XØD
ØD1
A
H3
TH1
H2
H420°
- Clamp lever with threaded insert- Materials:
Handle: diecast zinc, complies with DIN 1743
- Finish: Steel: blackened steelHandle : black plastic coating
.Uses.- The lever is normally in a locked position- Raise the handle to release the lever and
turn to required position- When handle is released, lever will
automatically lock in new position
.Info..- H4 = clearance height required
for handle
6+-10%
20+On request
1+List
Qty.Disc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 951HPC
M5M6M8
M10M10M10M12M12M16
4,04,06,56,5
10,010,010,012,012,0
505060606090909090
2550606060-
60-
60
10,010,013,513,516,019,019,023,023,0
13,013,018,018,021,525,525,530,030,0
14,514,519,519,523,027,527,532,532,5
Part numberThreaded
rodX H1 Steel Stainless ØD ØD1 ØD2Steel Stainless
CLB01T5SSCLB01T6SSCLB02T8SSCLB02T10SSCLB03T10SS
-CLB04T12SS
-CLB05T16SS
CLB01T5CLB01T6CLB02T8CLB02T10CLB03T10CLB04T10CLB04T12CLB05T12CLB05T16
24,524,528,528,537,043,043,049,049,0
15,015,017,517,524,026,026,033,033,0
30,030,041,541,553,561,061,072,072,0
33,533,545,545,558,066,066,077,077,0
40406565809595
110110
47,047,075,075,091,5
109,0109,0126,0126,0
7,57,59,59,5
11,013,013,015,515,5
161620202224242626
���������
�����-�--
15,00 F16,12 F19,99 F19,93 F22,75 F
-29,27 F
-37,34 F
11,68 F11,68 F14,45 F14,45 F15,99 F19,10 F19,10 F24,03 F24,03 F
Part number
H H2 H3 H4 A A1 BN° ofteeth Steel StsSteel Stainless
Price each 1 to 5
Steel StainlessCLB01T5SSCLB01T6SSCLB02T8SSCLB02T10SSCLB03T10SS
-CLB04T12SS
-CLB05T16SS
CLB01T5CLB01T6CLB02T8CLB02T10CLB03T10CLB04T10CLB04T12CLB05T12CLB05T16
Stock*
*Depending on availability
L
Clamp leverDiecast zinc CLBT
CLBTSS- Clamp lever with male thread and
flattened end according to DIN 78- Materials:
Insert: steel (class 5.8) or stainless steel (303)Handle: diecast zinc, complies with DIN 1743
- Finish: Blackened steel
.Uses.- The lever is normally in a locked position- Raise the handle to release the lever and
turn to required position- When handle is released, lever will
automatically lock in new position
.Options.- Alternate lengths of threaded
shaft available for orders of more than 10 pieces
.Info..- H4 = clearance height required
for handle
ØD2
A1B
H
LX
ØD
ØD1
A
H3
H1
H2
H420°
6+-10%
20+On request
1+List
Qty.Disc.
DISCOUNTS
96 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Stainless steel indexing handleWith threaded insertCLASS
- Stainless steel indexing handle with threadedinsert
- Materials:Precision cast handle: stainless steel 304Other components: stainless steel 303
- Finish:Handle: electrolytically polished stainless steelOther components: polished stainless steel
A
X
D
D1H
3
H4
H
H1
T H2
D2 B
Pull the handleto unlock
(Han
dle
rele
ased
)A1
6+-10%
20+On request
1+List
Qty.Disc.
DISCOUNTS
CLA01M5/SSCLA01M6/SSCLA02M6/SSCLA02M8/SSCLA03M8/SSCLA03M10/SSCLA04M10/SSCLA04M12/SS
M5M6M6M8M8M10M10M12
99121214141717
10,010,013,513,516,016,019,019,0
13,013,018,518,521,021,027,027,0
14,014,019,019,022,022,027,527,5
24,524,528,528,537,037,043,043,0
4,04,06,56,5
10,010,010,010,0
14,514,517,517,524,024,027,027,0
31,031,042,542,554,554,563,063,0
34,034,045,545,558,558,567,567,5
4040656580809595
47,047,074,574,591,091,0
109,0109,0
77
101011111313
1616202022222424
�-�-�-��
18,55 F
18,55 F
24,99 F
24,99 F
30,09 F
30,09 F
35,25 F
35,25 F
Part numberThread N° ofX T D D1 D2 H H1 H2 H3 H4 A A1 B teeth
Price each1 to 5Stock*
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 971HPC
A
A1
X
ØD
ØD1
H3
H4
H
H2
ØD
2
B
(Han
dle
rele
ased
)
L
End chamfered acc DIN78
Stainless steel indexing handleWith threaded shaft CLASS
- Stainless steel indexing handle with threadedshaft
- Materials:Precision cast handle: stainless steel 304Other components: stainless steel 303
- Finish:Handle: electrolytically polished stainless steelOther components: polished stainless steel
6+-10%
20+On request
1+List
Qty.Disc.
DISCOUNTS
Pull the handleto unlock
H1
CLA01T5/SSCLA01T6/SSCLA02T6/SSCLA02T8/SSCLA02T10/SSCLA03T8/SSCLA03T10/SSCLA04T12/SS
M5M6M6M8
M10M8
M10M12
10,010,013,513,513,516,016,019,0
13,013,018,518,518,521,021,027,0
14,014,019,019,019,022,022,027,5
24,524,528,528,528,537,037,043,0
4,04,06,56,56,5
10,010,010,0
14,514,517,517,517,524,024,027,0
31,031,042,542,542,554,554,563,0
34,034,045,545,545,558,558,567,5
4040656565808095
47,047,074,574,574,591,091,0
109,0
77
101010111113
1616202020222224
2030505050505050
19,09 F
19,09 F
26,52 F
26,52 F
26,52 F
31,85 F
31,85 F
37,37 F
Part numberThread N° of Thread
X D D1 D2 H H1 H2 H3 H4 A A1 B teeth length LPrice each
1 to 5--��-��-
Stock*
*Depending on availability
98 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Stainless steel cam leverWith threaded holeLACMSS
6+-10%
20+On request
1+List
Qty.Disc.
DISCOUNTS
- Element of manual blocking- Materials
Handle: Electrolytically stainless steelZ6CN18.10M Thrust washer: glass fibre reinforcedblack plastic PA 6 GF 30Hinge pin, threaded stud and washer:polished stainless steel 303
ØD1
ØD2
SHH1
F
Clamping force (N) Manual force (N)
B1 ØD B
A1
A ±1
stainless steel
LAC-M5/SSLAC-M6/SSLAC-M8/SS
M5M6M8
181827
9911
21,521,533,2
151524
14,514,518,0
22,022,028,5
70,470,496,0
448
120120350
1,21,21,5
22.89 F
22,89 F
31,74 F
Part number ØD ØD1 ØD2 B B1 H H1 A A1F
(kN) N SPrice each
1 to 5Thread
Clampingforce Manual
force Stroke
79,279,2
108,0
���
Stock*
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 991HPC
Adjustable stainless steel cam leverLACTSSWith external thread
6+-10%
20+On request
1+List
Qty.Disc.
DISCOUNTS
- Element of manual blocking- Quick fixing- Materials
Handle: stainless steel Z6CN18.10M,electrolytically polishedThrust washer: glass fibre reinforcedblack plastic PA 6 GF 30Hinge pin, threaded stud and washer:polished stainless steel 303
.Uses.- Adjustable cam levers are used when
the position of the tensioning leverrelative to the axis of tension only allowsone specific position. The final positionof the tensioning lever is adjusted withthe aid of a screwdriver via the finethread located on the stud.
ØD1
L
ØD2
ØD
SHH1
F
Clamping force Manual force (N)
A1
B1
A±1
B
Pin for fine adjustmentof tensioning lever
stainlesssteel
LAC-T5/SSLAC-T6/SSLAC-T8/SSLAC-T10/SS
M5M6M8M10
18182727
991111
21,521,533,233,2
15152424
14,514,518,018,0
22,022,028,528,5
70,470,496,096,0
4488
120120350350
1,21,21,51,5
40405050
26,77 F
26,77 F
36,12 F
36,12 F
Part number ØD ØD1 ØD2 B B1 H H1 A A1F
(kN) N S LPrice each
1 to 5
Clampingforce
Manualforce StrokeThread
79,279,2
108,0108,0
-���
Stock*
*Depending on availability
100 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
1,19 F
6,91 F
Unfinished
Zinc plated steel
With hole
With hole
-
60
0,049
0,023
�
�
Part numberPrice each
1 to 5Finish Fixing
Max. loadper handle
(kgf)Weight
(kg)
PX399-BR
PO301-ZBRiveted carrying handle
Stock*
SteelCarrying handle
PO301-ZB
125
116
36
5
31 4866,5
10
48,5 48,5 1,51,2
Ø8
38,5 38,55 holes
Ø5,5
14,5
4 assembly rivets
Handle PX399-BR:- The plate and ring of the handle are not attached- Plate: 1mm thick formed steel- Ring: formed wire Ø4.9mm
Handle PO301-ZB:- Reduced height saves space- Ring is secured to plate- Two part riveted plate, 1.5mm- 5 fixing holes Ø5.5mm- Ring: Formed steel wire 8mm- Plate secured using 4 x light alloy rivets Ø3mm
78
40
28
6
PX399-BR
Handle PX399-BR
Handle PO301-ZB51,5
Ø5,2
18
62 Ø4,9
96
PXPO
6+-5%
20+-10%
50+-15%
100+-20%
250+-25%
400+On request
1+List
Qty.Disc.
DISCOUNTS
*Depending on availability
Ordinary carry handle
Fasteningsystems
p.102 p.116 p.118
p.121 p.122 p.126
Latch clamp with catch-plate
Vertical toggleclamp
Horizontal toggleclamp
Horizontal hooktoggle clamp
Spring loadedlatch and catch-plate
p.124
Magnetic stud
Manual bonnet fastenerpage 126
SteelorStainlesssteel
New
NEW!
Manual bonnetfastener
102 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
StandardGE5-ZBGE5-SSMiniatureGE18-ZBGE18-SS
steelstainless steel
steelstainless steel
2,02,0
1,51,5
2.0mm2.0mm
0.8mm0.8mm
2.0mm2.0mm
1.0mm1.0mm
500500
300300
36,036,0
6,56,5
��
��
2,65 F
5,31 F
1,59 F
2,53 F
Part number Material Wire Ø
Tabthickness
mm
Back-plate
thickness
Max.tension
(N)Weight
(g)Price each
1 to 50Stock*
*Depending on availability
Toggle latches
58
19,5
GE18
15
2xØ3,2
8,5
3
30
6,5
X
21,5
6
X
21 16,5 12
Ø2
20
16
25
38
78
2xØ5,2
Ø1,5
Standard and miniature versionsGE5GE18
51+-10%
101+-15%
250+-20%
400+-25%
500+On request
1+List
Qty.Disc.
DISCOUNTS
- Hook fastening- Material: zinc plated steel or stainless steel 303
.Assembly.- GE5-ZB and GE5-SS are used with
AC121-ZB and AC121-SS hooks,dimension X = 77.5mm to withstand atension up to 350N
- GE18-ZB and GE18-SS are used withAC118-ZB and AC118-SS hooks,dimension X = 31.1mm to withstand atension up to 150N
.Advantages.- Very flexible- Other types of rings are available
.Info..- Not sold individually, please contact
us for details
steel or stainless steel
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1031HPC*Depending on availability
With padlock-holderGE14-ZB 2,5 1.5mm 2mm 500 21,9 � 2,79 F
Part number Wire ØTab
thicknessBack-platethickness
Max.tension (N)
Weight(g)
Price each1 to 50Stock*
Toggle latchWith padlock-holder GE14
39,5
- Hook fastening- Material: zinc plated steel
.Assembly.- GE14-ZB is used with AC101-ZB hook,
dimension X = 53.9mm to withstand atension up to 350N
.Advantages.- Flexible positioning- Allows many different movements
without undoing the clasp- More positions possible
.Info..- Not sold individually, please contact
us for details
5
17
24,5
Ø2,5
16
53,5
11,17
2xØ4,2
with padlock-holder
51+-10%
101+-15%
250+-20%
400+-25%
500+On request
1+List
Qty.Disc.
DISCOUNTS
104 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
SteelGE1006-ZBStainless steelGE1006-SS
2,7
2,5
1.5mm
1.5mm
2.0mm
2.0mm
550
550
25
24
�
�
1,47 F
6,91 F
Part number Wire ØTab
thicknessBack-platethickness
Max.Tension (N)
Weight(g)
Price each1 to 50
*Depending on availability
Stock*
Elastic ringed latch
- Hook fastening- Ring is slightly flexible- Material: zinc plated steel or
stainless steel 303
.Assembly.- Approx mounting dimension:
X = 56.6mm to withstand a tension of400N
.Info..- Not sold individually, please contact us
for details
X
Steel or stainless steel
22
Ø2,7
77,5
11,1
5,6
2 holes Ø4.2
22
49
Slot fasteningGE1006
51+-10%
101+-15%
250+-20%
400+-25%
500+On request
1+List
Qty.Disc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1051HPC
SteelGP22-ZBGP23-ZBStainless steelGP22-SSGP23-SS
1,72,5
2,73,5
2.00mm2.00mm
2.00mm2.00mm
2.5mm2.5mm
2.5mm2.5mm
450450
450450
7575
7575
��
��
6,18 F
6,37 F
12,72 F
13,11 F
Part number Wire ØTab
thicknessBack-platethickness
Max.tension (N)
Weight(g)
Price each1 to 50Stock*
*Depending on availability
Articulated spring clasp
with padlock-holder
- Large positioning tolerances- Very adaptable- Materials: zinc plated steel or
stainless steel 303
.Assembly.- When used with AC122 hook, dimension
X= 87mm to withstand a tension of 350N
.Info..- Not sold individually, please
contact us for details
X
steel or
stainless
steel
47,5Ø3,5
39,7
75
3rd holemodel GP22
6,117
24
6,2
20,5
Ø5,5
GP22 GP23
Recommended in absence of joint GP22GP23
51+-10%
101+-15%
250+-20%
400+-25%
500+On request
1+List
Qty.Disc.
DISCOUNTS
106 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
*Depending on availability
SteelAC101-ZBAC106-ZBAC109-ZBAC111-ZBStainless steelAC101-SS
GE14-ZBGE14-ZBGE14-ZBGE14-ZB
GE1006-SS
4,75,26,26,8
4,7
����
�
0,53 F
0,82 F
0,70 F
1,08 F
0,53 F
Part number Suitable for latchWeight
(g) SPrice each
1 to 50Stock*
Hook for latch15mm wideACZB
ACSS- Hook fastening- Material: zinc plated steel or
stainless steel 303
.Selection.- Choose your own hook/latch combination
by simply verifying the interior width ofthe ring and selecting a hook with asmaller width
.Info..- Not sold individually, please contact us
for details15
9
AC101 AC106-ZB
AC109-ZB AC111-ZBØ3
1218,2
Ø3
1,2
2xØ3,2
r=5
6,2
15
1,5
Ø3
Ø3,219,5
5
15
9
15
r=5
1,5
4,5
13,2
8
28,5
8
3,2
15
6
23,5
r=3,5
21,5
Ø5
1,59
8
7
r=4
r=3,5
15
28,5
143xØ3,7
steel orstainless steel
51+-10%
101+-15%
250+-20%
400+-25%
500+On request
1+List
Qty.Disc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1071HPC
SteelAC103-ZBAC118-ZBAC121-ZBAC122-ZBStainless steelAC118-SSAC121-SSAC122-SS
-GE18-ZBGE5-ZB
GP22-ZB and GP23-ZB
GE18-SSGE5-SS
GP22-SS and GP23-SS
3,41,59,41,9
1,59,41,9
-���
���
0,28 F
0,21 F
0,40 F
0,70 F
0,34 F
0,99 F
1,91 F
Part numberSuitable for latch
Weight(g)
Price each1 to 50Stock*
*Depending on availability
,Hook for latchWidths: 12, 13, 18 and 20mm ACZB
ACSS- Hook fastening- Material: zinc plated steel or
stainless steel 303
.Selection.- Choose your own hook/latch
combination by simply verifying theinterior width of the ring and selectinga hook with a smaller width
.Info..- Not sold individually, please
contact us for details
Ø2
18
AC118
9,5
Ø5
AC121
2xØ4,2
12
13,5
57
1,5 r=5
AC103-ZB
1Ø1,5
3
Ø3,2
10
4,5
10,5
13
8
9
2
12,5
12
14,5 5,2
20
18
26
14
2
Ø6
24
40
25
2,5
AC122
14
steel orstainless steel
36
Ø5,2
20
51+-10%
101+-15%
250+-20%
400+-25%
500+On request
1+List
Qty.Disc.
DISCOUNTS
108 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Adjustable latch clamp with catch-plateSpan adjustable from 77.3 to 83mmSRG20
14,1
2
B
1023,9
2
14,1
A
30,6
33
18,8
4,9
Ø4
Ø4
Ø4,920
17,9
51+-10%
101+On request
1+List.
Qty.Disc.
DISCOUNTS
SRG20-77-83SRG20-77-83/SS
77,3 to 83 20 Steel Galvanised 4677,3 to 83 20 S-Steel 304 Natural 46
3,65 F
8,60 F
��
Part numberWeight
A B Material Finish (g)Price each
1 to 50Stock*
newdiscounts
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1091HPC
Adjustable latch clamp with catch-plateSpan adjustable from 96 to 121.7mm SRG25
18
2,5
B
12,5
30
3
17
A
40,5
43
24,4
6,8
Ø5,2
Ø6
Ø5,226,5
17,1
51+-10%
101+On request
1+List.
Qty.Disc.
DISCOUNTS
SRG25-96-121SRG25-96-121/SS
96 to 121,7 25 Steel Galvanised 9096 to 121,7 25 S-Steel 304 Natural 90
5,87 F
14,72 F
��
Part numberWeight
A B Material Finish (g)Price each
1 to 50Stock*
*Depending on availability
newdiscounts
110 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Adjustable latch clamp with catch-plateSpan adjustable from 117.4 to 128mmSRG40
18
3
B
14,3
14,3
6
6
30,3
2,4
20
A
45,2
43
29,3
6,5
Ø5
Ø3
Ø6
Ø5,327
25,1
51+-10%
101+On request
1+List.
Qty.Disc.
DISCOUNTS
SRG40-117-128SRG40-117-128/SS
117,4 to 128 40,6 Steel Galvanised 130117,4 to 128 40,6 S-Steel 304 Natural 130
6,57 F
21,40 F
��
Part numberWeight
A B Material Finish (g)Price each
1 to 50Stock*
*Depending on availability
newdiscounts
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1111HPC
Adjustable latch clamp with catch-plateSpan adjustable from 78 to 90mm SRG52
36 B19
A
18
10
5
15 X
36
Ø5
Ø435 32
51+-10%
101+On request
1+List.
Qty.Disc.
DISCOUNTS
SRG52-78-90SRG52-78-90/SS
78 to 90 67 52 Steel Galvanised 10078 to 90 67 52 S-Steel 304 Natural 100
8,84 F
19,90 F
Part numberWeight
X A B Material Finish (g)Price each
1 to 50�-
Stock*
*Depending on availability
newdiscounts
112 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Adjustable latch clamp with catch-plateSpan adjustable from 82 to 92mmSVG26
SVG26-82-92SVG26-82-92/SS
82 to 92 26,4 Steel Galvanised 4882 to 92 26,4 S-Steel 304 Natural 48
5,51 F
9,22 F
Part numberWeight
A B Material Finish (g)Price each
1 to 50
19
2
B
6,3
6,3
6,9
6,923,9
2
14,1
A
42,5
29,6
34
18,8
4,9
Ø4
Ø3,7
Ø5,2
Ø6,3
17,46,4
11 11
51+-10%
101+On request
1+List.
Qty.Disc.
DISCOUNTSnewdiscounts
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1131HPC
Adjustable latch clamp with catch-plateSpan adjustable from 106.7 to 121.4mm SVG32
SVG32-106-121SVG32-106-121/SS
106,7 to 121,4 32 Steel Galvanised 102106,7 to 121,4 32 S-Steel 304 Natural 102
5,40 F
15,40 F
Part numberWeight
A B Material Finish (g)Price each
1 to 50
16,7
2,7
B
7,2
7,2
8,8
8,830
3
17
A
50,2
45
24,4
6,8
Ø5,2
Ø6Ø5
Ø5,2
35,2
11 16
51+-10%
101+On request
1+List.
Qty.Disc.
DISCOUNTSnewdiscounts
114 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Adjustable latch clamp with catch-plateSpan adjustable from 118 to 130.5mmSVG39
22
3
B
9,45
9,45
10,2
10,230,3
2,4
20
A
52,5
45
29,3
6,5
Ø5
Ø3
Ø9,3Ø6,2
Ø4,9
35,1
18 15
51+-10%
101+On request
1+List.
Qty.Disc.
DISCOUNTS
SVG39-118-130SVG39-118-130/SS
118 to 130,5 39,3 Steel Galvanised 124118 to 130,5 39,3 S-Steel 304 Natural 124
9,38 F
20,54 F
��
Part numberWeight
A B Material Finish (g)Price each
1 to 50Stock*
*Depending on availability
newdiscounts
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1151HPC
Adjustable latch clamp with catch-plateSpan adjustable from 174 to 190mm SVG50
27
3
B34,2
7,9
7,9
35
3
7
7
21
A
3060
7 7
54,5
406,6
16
22,6 Ø5,2
Ø5,7
Ø5
Ø9
Ø5
30
51+-10%
101+On request
1+List.
Qty.Disc.
DISCOUNTS
SVG50-174-190SVG50-174-190/SS
174 to 190 50 Steel Galvanised 236174 to 190 50 S-Steel 304 Natural 236
12,01 F
39,26 F
Part numberWeight
A B Material Finish (g)Price each
1 to 50�-
Stock*
*Depending on availability
newdiscounts
116 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
SLV-0075SLV-0100SLV-0150SLV-0200SLV-0250SLV-0300SLV-0350SLV-0450SLV-0550
SLV-0075SS-
SLV-0150SS-
SLV-0250SS----
SLV-0075SS-
SLV-0150SS-
SLV-0250SS----
130°95°95°
105°95°
105°90°90°90°
----
125°-
120°125°120°
160°185°185°175°160°160°180°180°180°
90°65°75°70°70°65°70°70°65°
----
85°-
80°85°80°
100°105°110°95°
100°90°
110°110°110°
252927353543505376
343438424553646495
9498
121135175186220228312
Part numberSteel Stainless steel Pos.1 Pos.2
withoutgudgeon Pos.1 Pos.2
withoutgudgeon A1 B1 H
SLV-0075SLV-0100SLV-0150SLV-0200SLV-0250SLV-0300SLV-0350SLV-0450SLV-0550
8080
120100190130230260290
700700
1350100010002000220032003000
110010001650220028003700450070008000
500500800950900900
140014001800
750800
1050135017001850300030003900
162223303234435184
9,09,5
11,012,717,519,022,025,032,0
3238434475
10095
124156
Part numberSteel Stainless steel
Manualforce(N) F1(N) F2(N) F3(N) F4(N) C C1 L1
Opening angle ofsecuring arm
Opening angle ofhandle
Holding force Locking force
Vertical toggle clampSecures by pressureSLV
- Two materials to choose from- Materials:
SLV body: zinc plated steelSCH/SS body: stainless steel 18.9 (303)Rivets: stainless steelFastening pin and nuts: phosphated steelHandle: oil-resistant plastic
- With fixing base and adjustable fastening pin
.Advantages.- The angle between securing arm to the
handle can be adjusted by removing thegudgeon
.Options.- Fixing bracket (please ask us)
Typical application
steel orstainless
steel
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1171HPC
16,51 F
16,29 F
18,81 F
18,81 F
29,05 F
34,93 F
38,99 F
49,55 F
66,50 F
41,72 F
53,60 F
74,96 F
SteelSLV-0075SLV-0100SLV-0150SLV-0200SLV-0250SLV-0300SLV-0350SLV-0450SLV-0550Stainless steelSLV-0075SSSLV-0150SSSLV-0250SS
16,016,012,719,019,025,032,032,051,0
16,012,719,0
5,06,07,08,08,09,09,0
10,012,5
5,07,08,0
-14,0
-12,7
-19,0
---
---
24,024,027,027,032,034,545,045,070,0
24,027,032,0
5,55,56,46,38,88,8
10,612,716,5
5,56,48,8
-17,5
-25,0
-----
---
4,44,85,15,57,18,08,38,7
12,3
4,45,17,1
57677079
110143145177232
5770
110
M5x35M5x35M6x50M6x50M8x60M8x60M10x80M12x100 M16x150
M5x35M6x50M8x60
���������
�-�
Part number A A2 A3 B B3 B4 D L M
Priceeach1 to 5Stock*
*Depending on availability
SLV
A1L1Rp
RpB1
C
C1
Manual force
Stop gudgeon position 1Stop gudgeon position 2
F1 F2
F3 F4
D
AA2Hole template for
part numberSLV-0100
Hole template forpart numberSLV-0200
Hole template forpart numberSLV-0300
A3
BB4
D
A AA2 A2
A3 A3
B BB4
H
L
A2
Rp
B
DA
M
B3
B3
D
Securing arm openfor
SLV-0100,SLV-0200, and
SLV-0300 1+List
6+-5%
15+-10%
20+On request
Qty.Disc.
DISCOUNTS
118 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
SLH-0075SLH-0150
90°90°
75°80°
80140
7501500
320650
Part number
Openingangle of
securing armPos. 1
Opening angleof handle
Pos. 1Manual force
(N)Manual force
F1(N)
SecuringforceF3(N)
SLH-0075SLH-0150
13,5 25 5,7 16,8 27 16 - 19 9,5 5,2 38 108 24,5 M5x35 �26,0 38 6,0 28,0 40 20 22 25 14,0 5,5 53 155 38,0 M6x50 �
18,81 F
22,12 F
Part number
Priceeach1 to 5A A1 A2 B B1 B2 B4 C C1 D H L L1 M Stock*
*Depending on availability
Horizontal toggle clampSecures by direct pressureSLH
A1
H
L1Rp
C
C1
Rp
M
B2
B1
Manualforce
N.B. the end of the threadedbolt is covered with a
neoprene cap
F1
F3
L
A2
Rp
B
D
A
B4
- Materials:Body: zinc plated steelFastening pin and nuts: phosphated steelHandle: Oil resistant plastic
- With fixing base and adjustable fastening pin
.Options.- Fixing bracket (please ask us)
1+List
6+-5%
15+-10%
20+On request
Qty.Disc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1191HPC
SEH-01SEH-02SEH-04
180027004500
200040007000
100150200
120°120°120°
364864
243345
192636
426485
105145190
135185250
384565
6885
120
162432
Size
TractionforceF1(N)
PressureF2(N)
Manualforce(N)
Openingangle B B1 B2 H min. max. min. max.
Lockingdistance
L2
SEH-0140SEH-0250SEH-0450
SEH-0140SSSEH-0250SSSEH-0450SS
263551
131932
4,56,08,0
11,014,019,0
233240
162128
5,26,58,5
468
2,53,04,0
42,62 F
63,80 F
129,77 F
37,65 F
55,58 F
93,14 F
Part numberSteel Stainless steel A A1 A2 A3 A4 B3 D D1 S
Price each 1 to 5
Steel StS
Adjustable distanceL L1
Horizontal stirrup toggle clamp
A1L1 mini.maxi.
mini.maxi.
L
Rp
Rp
D
AA4
A3A2
D
B3
D1
B2 B1
L2 Rp S
Manual force
Locking distance
F1 F2
H
- 2 materials to choose from- Materials:
SEH body: zinc plated steelSEH/SS body: stainless steel 18.9 (303)Handle: Oil-resistant plastic
- Supplied with anchoring base
.Advantages.- Distance of hook from toggle clamp easily
adjustable
.Uses.- Designed to secure covers and shutters
B
Hook fastening SEH
Steel orstainless
steel
1+List
6+-5%
15+-10%
20+On request
Qty.Disc.
DISCOUNTS
120 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
SEV-0140SEV-0250SEV-0450
SEV-0140SSSEV-0250SSSEV-0450SS
263551
131932
4,56,08,0
111419
243240
364864
243345
192636
162128
5,26,58,5
468
426485
2,53,04,0
Part numberSteel Stainless steel
Price each1 to 5
Steel StSA A1 A2 A3 A4 B B1 B2 B3 D D1 H S
SEV-01SEV-02SEV-04
180027004500
200040007000
100150200
145°145°145°
25 4933 6041 80
1 251 281 40
22 76 34 11545 152
Size
TractionforceF1(N)
PressureF2(N)
Manualforce(N)
Openingangle ofhandle
LMin. Max.
L1Min. Max.
LockingdistanceL2 L3
Adjustable distance
37,65 F
55,58 F
93,14 F
48,73 F
68,50 F
129,98 F
Vertical stirrup toggle clamp
- 2 materials to choose from- Materials:
SEH body: zinc plated steelSEH/SS body: stainless steel 18.9 (303)Handle: Oil-resistant plastic
- Supplied with anchoring base
.Advantages.- Distance of hook from toggle clamp
easily adjustable
.Uses.- Designed to secure covers
and shutters
L2
A4 L mini.maxi.
L1 min.max.
Rp Rp
SA2
A3D
D1
H
Manual force
Lockingdistance
Edge and anchorbase must be alignedduring assembly
F1
F2
DRp
D1
L3
A1
B3
BB1B2
A
Secures with a hookSEV
Steel orstainless
steel
1+List
6+-5%
15+-10%
20+On request
Qty.Disc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1211HPC
SCH-0130SCH-0270SCH-0430
SCH-0130SSSCH-0270SSSCH-0430SS
395272
27,036,052,5
22,229,043,5
435778
314159
263450
5,26,58,5
68
12
263549
67
10
13,520,027,0
��-
��-
53,60 F
80,99 F
169,18 F
45,96 F
67,89 F
86,08 F
Part numberSteel Stainless steel
Prix Uni. 1 à 5Acier InoxB B1 B2 B3 B4 B5 D D1 H R T Steel StS
SCH-01SCH-02SCH-04
150030004000
200040007000
100160200
155°155°155°
161248310
456884
5884
104
7090
115
263551
131932
Size
Tractionforce
F1 (N)PressureF2 (N)
Manualforce(N)
Handleopening
angle L L1 L2
Lockingdistance
L3 A A1
Stock*
*Depending on availability
Horizontal hook toggle clampHook fastening SCH
L3Rp
TR Rp
H
Manual force
Locking distance
F1 F2
D
Rp
D1
D
L
L2L1
A1
B5B4B3 BB1B2
A
A1
A
- 2 materials to choose from- Materials:
SEH body: zinc plated steelSEH/SS body: stainless steel 18.9 (303)Handle: Oil-resistant plastic
- Supplied with anchoring base
.Advantages.- Distance of hook from toggle clamp easily
adjustable
.Uses.- Designed to secure covers and shutters
Steel or
stainless steel
1+List
6+-5%
15+-10%
20+On request
Qty.Disc.
DISCOUNTS
122 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Spring loaded latchPlated steel or chromed brassLRR
51+-10%
101+On request
1+List
Qty.Disc.
DISCOUNTS
Version ALRR-50-A/ZNLRR-50-A/LCVersion BLRR-50-B/ZNLRR-50-B/LC
50 56 1,5 1,2 16 20 34 27 12 12 4 Steel 7150 56 1,5 1,2 16 20 34 27 12 12 4 Brass 75
50 56 1,5 1,2 16 20 34 27 12 12 4 Steel 7150 56 1,5 1,2 16 20 34 27 12 12 4 Brass 75
17,60 F
23,73 F
17,60 F
37,62 F
Part numberWeight
A B C D E F G H J K ØS Material (g)Price each
1 to 50
AB
ØS
G J
E
F
K
A Version B Version
HJ
K
HJ
CD
- Night latch- Inward/outward opening versions available (A+ B
versions)- Materials : Plated steel or chromed brass
.Info..- Part N° LRR-50-A/LC replaces the old reference LRR-50
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1231HPC
Catch-plate for latchPlated steel or chromed brass LRRGPV
51+-10%
101+On request
1+List
Qty.Disc.
DISCOUNTS
LRR-50-GPV/ZNLRR-50-GPV/LC
50 16 1,5 16 34 16 4 Steel 1250 16 1,5 16 34 16 4 Brass 13
2,62 F
6,21 F
Part numberWeight
A B C D G H ØS Material (g)Price each
1 to 50
C
D
H
G A
B
ØS
- Catch for sprung latch LRR- Materials : Plated steel or chromed brass
124 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
PLC45-10PLC50-10PLC55-11PLC63-14PLC71-15PLC80-18PLC80-20
45505563718080
10101114151820
4,08,56,06,5
10,06,5
M10
17,522,022,024,023,511,5
-
7181329255450
7090
110195240478540
��-----
33,75 F
34,70 F
36,09 F
37,52 F
38,45 F
60,55 F
60,55 F
Part number ØD H Ød ØA F (daN)Weight
(g)
Priceeach1 to 5
PLT25-15PLT32-15PLT40-18PLT50-22PLT63-30PLT80-34PLT100-42
253240506380
100
15151822303442
778
10141822
88
1012152022
M4M4M5M6M8M10M12
48
1120326090
223260
110240520940
����---
19,65 F
21,05 F
23,91 F
28,59 F
47,85 F
61,02 F
132,41 F
Part number ØD L H Ød ØM F (daN)Weight
(g)
Priceeach1 to 5
Stock*
Stock*
*Depending on availability
*Depending on availability
FerritePLCMagnetic stud with central hole
- Cup mounted Ferrite magnet withsmooth bored hole
- Working temperature: -50°C to +100°C- Good corrosion resistance- Good mechanical resistance
.Uses.- Mounting of objects where space is
limited or mounting notice boards,protective covers etc
- Positioning of stops or inserts used inmoulding machines
ØD
ØA
H
Active face
Ød
Magnetic stud with threaded holePLT- Cup mounted Ferrite magnet with
smooth bored hole- Working temp.: -50°C to +100°C- Good corrosion resistance- Good mechanical resistance
.Uses.- Fastening: protective casing,
tool machines, support cables...- Positioning: stops, inserts...- Gripping: inaccessible places, transport
ØD
LH
ØdØM
Ferrite
1+List
6+-15%
20+-20%
40+-30%
60+On request
Qty.Disc.
DISCOUNTS
1+List
6+-15%
20+-20%
40+-30%
60+On request
Qty.Disc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1251HPC
VAP19-8VAP28-9VAP38-11
19,028,638,0
3,54,74,7
8,09,5
11,1
35
11
154585
��-
29,52 F
42,68 F
52,54 F
Part number ØD Ød E F (daN)Weight
(g)
Priceeach1 to 5
*Depending on availability
Stock*
AlNico VAPMagnetic stud with central hole
- AINiCo magnets with central through drilledmounting hole
- Both faces are machine finished and have a strongattraction force in a reduced size
- Working temperature -50°C to +450°C- Good shock resistanceFor recessed mounting, following precautionsshould be observed- in a non-ferrous support: none specified- in a ferrous support: magnet should be isolated from
the support by an air gap or non-ferrous material
.Applications.- Suitable for fixing or positioning of components in
reduced spaces and possibly subject to hightemperatures
- Positioning of inserts in moulding machines...
ØD
E
Activeface
Ød
1+List
6+-15%
20+-20%
40+-30%
60+On request
Qty.Disc.
DISCOUNTS
126 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Manual bonnet fastenerEasy fastening
51+-10%
101+-15%
250+On request
1+List.
Qty.Disc.
DISCOUNTS
- Manually fastened using a hook- Split pin supplied - Material :
Black rubber, Shore 65/70
.Advantage.- Very easy to use
.Accessories.- See ACM-AZ-32 and ACM-BZ-32 hooks and
ACM-BZ-32 bracket
.Info..- Not sold individually, please contact us
for details
ACM-TRI-120 120 54 25 19 25 4 3,39 F
Part number L A B ØD Ød1 ØdPrice each
1 to 50
L
A B
ØD
Ød
Ød1
ACM-TRI
NEW!
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1271HPC
Clip for bonnet fastenerEasy fastening ACM-DZ
- Material : Plated steel- Used to mount the ACM-TRI-120 bonnet
fastener
.Info..- Not sold individually, please contact us for
details
ACM-DZ-23 19 34 22 2 30 30 5 4 2,05 F
Part number A B C D E F Ød Ød1Price each
1 to 50
G
C
DF
A
B
Ød
Ød1
E
51+-10%
101+-15%
250+On request
1+List.
Qty.Disc.
DISCOUNTS
NEW!
128 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Mounting bracket for bonnet fastenerEasy fasteningACM-AZ
ACM-BZ- Material : Plated steel- Used to mount the ACM-TRI-120
bonnet fastener
.Info..- Not sold individually, please
contact us for details
ACM-AZ-32ACM-BZ-32
32 40 50 2 16 4 15 1832 38 44 2 16 4 15 18
1,87 F
1,87 F
Part number A B C D E Ød F GPrice each
1 to 50
G
F
B
C
C
D
D
E
E
Ød
Ød
A
AZ-32
AZ-32
BZ-32
BZ-32
51+-10%
101+-15%
250+On request
1+List.
Qty.Disc.
DISCOUNTS
NEW!
Indicators
High quality portable infrared thermometerpage 146
p.130
p.138 p.142 p.146
Digital positionindicator OP3
p.132
Digital positionindicator OP6
Laser targetedthermometer
p.134
Digital positionindicator OP9
Portable infraredthermometer
High quality portableinfrared thermometer
130 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Digital position indicator4 digit displayOP3DX
OP3SX- 4 digit display (9999) with red digits
for tenths/hundredths- Shaft driven position indicator- Displays linear or angular movement by
use of mechanism driven by a rotatingshaft
- Nonflammable polycarbonate caseProtection IP64 Max. temperature 80°C
- Colour: orange- Height of digits: 5mm- Standard bore for shaft 14H7, smaller
bores will require use of reducing sleeve
Ø14
46
32
22
Ø27Ø20
14
26
Ø6
Ø30 Ø24
5,5
Ø6Ø5
22
M4
Ø14H7
Shaft holemax. Ø14
Gasketsupplied
Securityscrew
16
4
5 15
2
7
Clamp spacerOP3-BE
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1311HPC*Depending on availability
OP3-A10-DXOP3-A20-DXOP3-A40-DXOP3-A50-DXOP3-A100-DXOP3-B10-DXOP3-B20-DXOP3-B40-DXOP3-B50-DXOP3-B100-DXOP3-A10-SXOP3-A20-SXOP3-A40-SXOP3-A50-SXOP3-A100-SXOP3-B10-SXOP3-B20-SXOP3-B40-SXOP3-B50-SXOP3-B100-SX
AAAAABBBBBAAAAABBBBB
1245
101245
101245
101245
10
001 0002 0004 0005 0010 0001 0002 0004 0005 0010 0001 0002 0004 0005 0010 0001 0002 0004 0005 0010 0
300300250200150300300250200150300300250200150300300250200150
clockwiseclockwiseclockwiseclockwiseclockwiseclockwiseclockwiseclockwiseclockwiseclockwise
anticlockwiseanticlockwiseanticlockwiseanticlockwiseanticlockwiseanticlockwiseanticlockwiseanticlockwiseanticlockwiseanticlockwise
��������-��-���-----
61,92 F
61,92 F
61,92 F
61,92 F
61,92 F
61,92 F
61,92 F
61,92 F
61,92 F
61,92 F
61,92 F
61,92 F
61,92 F
61,92 F
61,92 F
61,92 F
61,92 F
61,92 F
61,92 F
61,92 F
Part number ViewPitch(mm)
Displayafter oneturn (mm)
Max. speed(rpm)
Countingdirection
Price each1 to 4Stock*
OP3DXOP3SX
.Options.- Version with stainless steel parts
available- Torque pin Ø6mm
.Assembly.- Insert the indicator on to the shaft
ensuring that the torque pin isinserted into the 5mm hole thatshould have been provided. Reset thedisplay to zero and secure the fixingscrew.
View A
View B
1+List
5+-6%
10+-12%
15+-20%
25+On request
Qty.Disc.
DISCOUNTS
newdiscounts
132 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Digital position indicator5 digit displayOP6DX
OP6SX- 5 digit display (99999) with red
digits for tenths/hundredths- Shaft driven position indicator- Displays linear or angular
movement by use of mechanismdriven by a rotating shaft
- Nonflammable polycarbonate caseProtection IP64 Max. temperature 80°C
- Colour: orange- Height of digits: 6mm.- Standard bore for shaft 20H7,
smaller bores will require use ofreducing sleeve
Ø20
66
24
14
Ø40 Ø30
30
48
Countersunk holeØ40x14
Gasket supplied
Torquepin
Setscrew
Fixingholes
2
42,5
Ø20H7
Ø6
6 8
M5
Ø10Ø8
Alternativetorque pin
Ø8/10
8
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1331HPC
OP6-A10-DXOP6-A20-DXOP6-A40-DXOP6-A50-DXOP6-A100-DXOP6-B10-DXOP6-B20-DXOP6-B40-DXOP6-B50-DXOP6-B100-DXOP6-A10-SXOP6-A20-SXOP6-A40-SXOP6-A50-SXOP6-A100-SXOP6-B10-SXOP6-B20-SXOP6-B40-SXOP6-B50-SXOP6-B100-SX
AAAAABBBBBAAAAABBBBB
1245
101245
101245
101245
10
001 0002 0004 0005 0010 0001 0002 0004 0005 0010 0001 0002 0004 0005 0010 0001 0002 0004 0005 0010 0
300300200200150300300200200150300300200200150300300200200150
clockwiseclockwiseclockwiseclockwiseclockwiseclockwiseclockwiseclockwiseclockwiseclockwise
anticlockwiseanticlockwiseanticlockwiseanticlockwiseanticlockwiseanticlockwiseanticlockwiseanticlockwiseanticlockwiseanticlockwise
�����������-��------
64,16 F
64,16 F
64,16 F
64,16 F
64,16 F
64,16 F
64,16 F
64,16 F
64,16 F
64,16 F
64,16 F
64,16 F
64,16 F
64,16 F
64,16 F
64,16 F
64,16 F
64,16 F
64,16 F
64,16 F
Part number ViewPitch(mm)
Displayafter oneturn (mm)
Max. speed(rpm)
Countingdirection
Price each1 to 4
*Depending on availability
Stock*
OP6DXOP6SX
.Options.- Version with stainless steel parts
available
.Assembly.- Insert the indicator on to the shaft
ensuring that the torque pin isinserted into the 6mm hole thatshould have been drilled previously.Reset the display to zero and securethe fixing screw.
View A
View B
1+List
5+-6%
10+-12%
15+-20%
25+On request
Qty.Disc.
DISCOUNTSnewdiscounts
134 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Digital position indicator5 digit displayOP9
Ø30- 5 digit display (99999) with red digits for
tenths/hundredths- Shaft driven position indicator- Displays linear or angular movement by use of
mechanism driven by a rotating shaft- Nonflammable polycarbonate case Protection IP54.
Max. temperature 80°C- Colour: orange- Height of digits: 7mm, with 9mm lens- Standard bore for shaft 30H7, smaller bores will
require use of reducing sleeve
94
29
1545
Ø49 Ø40
40
64 RecessØ49x15
Gasket supplied
Torque pin
Set screw
2
Ø30 H7
Ø6
6,5 8
M6
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1351HPC
OP9
OP9-A10-DXOP9-A30-DXOP9-A40-DXOP9-A50-DXOP9-A100-DXOP9-B10-DXOP9-B30-DXOP9-B40-DXOP9-B50-DXOP9-B100-DXOP9-A10-SXOP9-A30-SXOP9-A40-SXOP9-A50-SXOP9-A100-SXOP9-B10-SXOP9-B30-SXOP9-B40-SXOP9-B50-SXOP9-B100-SX
AAAAABBBBBAAAAABBBBB
1345
101345
101345
101345
10
001 0003 0004 0005 0010 0001 0003 0004 0005 0010 0001 0003 0004 0005 0010 0001 0003 0004 0005 0010 0
300300200200100300300200200100300300200200100300300200200100
clockwiseclockwiseclockwiseclockwiseclockwiseclockwiseclockwiseclockwiseclockwiseclockwise
anticlockwiseanticlockwiseanticlockwiseanticlockwiseanticlockwiseanticlockwiseanticlockwiseanticlockwiseanticlockwiseanticlockwise
146,62 F
146,62 F
146,62 F
146,62 F
146,62 F
146,62 F
146,62 F
146,62 F
146,62 F
146,62 F
146,62 F
146,62 F
146,62 F
146,62 F
146,62 F
146,62 F
146,62 F
146,62 F
146,62 F
146,62 F
Part number ViewPitch(mm)
Display afterone turn
(mm)Max. speed
(rpm)Countingdirection
Price each1 to 4
.Options.- Version with stainless steel parts
available
.Assembly.- Insert the indicator on to the shaft
ensuring that the torque pin isinserted into the 6mm hole thatshould have been drilled previously.Reset the display to zero and securethe fixing screw.
View A
View B
1+List
5+-6%
10+-12%
15+-20%
25+On request
Qty.Disc.
DISCOUNTS
newdiscounts
136 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Reducing sleeve for OP indicatorsNylonOP
OPF.Assembly.- Reducing sleeve for use with
digital position indicators- Use a split reducing sleeve
when using a OP-FL lockingclamp
- Material: Nylon
ØA ØD
L
OP3-14-06OP3-14-08OP3-14-10OP3-14-12
OP6-20-10OP6-20-12OP6-20-14OP6-20-16OP6-20-17OP6-20-18
OP9-30-20OP9-30-25
6 14 128 14 12
10 14 1212 14 12
10 20 1212 20 1214 20 1216 20 1217 20 1218 20 12
20 30 1625 30 16
����
-���--
--
5,70 F
3,42 F
3,42 F
3,42 F
3,82 F
3,82 F
3,82 F
3,82 F
3,82 F
3,82 F
on request4,56 F
Part numberBoreØA ØD L
Price each1 to 4
For indicator OP3
For indicator OP6
For indicator OP9
*Depending on availability
Stock*
1+List
5+-6%
10+-12%
15+-20%
25+On request
Qty.Disc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1371HPC
OP3-FLOP6-FL
OP3-PMOP6-PM
--
31,844,0
--
2030
--
1626
15,015,0
17,527,5
��
��
60,07 F
60,07 F
24,05 F
28,56 F
Part number ØD ØA ØB LPrice each
1 to 4
Clamping plate
Manual control knob
*Depending on availability
Stock*
ØD
ØA
ØB
L
Manual control knobClamping plate and manoeuvring knob OPFL
OPPMClamping plate- Placed on the back of the indicator.- Allows shaft to be blocked in desired
position- Can be secured in positions A or B.- Materials: Zirtel® and zamakManoeuvring knob- The knob attaches directly to the
indicator shaft- Allows manual operation of the
position indicator- An adhesive sticker attached to the
knob indicates the direction inwhich to turn to increase ordecrease the displayed value
- Material: anodised black aluminium
OP3-FL
OP6-FL
30
2246
50
48
32
66
56
18
10 10
18
15
15
19,5
25
20
Ø4,5
Ø4,5
Manual control knob OP-PM
OP-FLClamping plate
1+List
5+-6%
10+-12%
15+-20%
25+On request
Qty.Disc.
DISCOUNTS
138 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Non contact temperature measurement
.Applications.- Asphalt- Chemistry, adhesives- Electric / electronics- Glass- Rubber- Heating techniques- Wood- Air conditioning technology- Ceramics- Plastics- Lacquer drying- Leathers- Food- Paper, cardboard, packaging- Tobacco- Textiles- Environmental, solar
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1391HPC
Laser targeted thermometerFrom -50° to +400°C TIN
- Infrared thermometer with laser targeting- Fast temperature measurement- Easy to use and to carry- Accuracy: 2% -2.5%- Resolution: 0.1°C from 0 to 199°C- Repeatability: 0.15°C at 25°C- Repeatability: 0.75°C at 25°C- Distance ratio: 9/1- Fixed emissivity: 95%
Lasertargeting
TIN-11N 72x39x175 -50°C to +400°C 111,63 F
Part numberDimensions
(mm) Measurement rangePrice each
1 to 4
5+On request
1+List.
Qty.Disc.
DISCOUNTS
140 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Laser targeted thermometerTIN From -60° to +500°C
- Infrared thermometer with laser targeting- Fast temperature measurement- Optional external temperature sensor - Easy to use and to carry- Measurement range: -60° to +500°C- External thermocouple (Type K) range:
-64°C to 1400°C- Accuracy: 2% -2°C- Resolution: 0.1°C from 0 to 199°C- Repeatability: 0.15°C at 25°C- Repeatability: 0.75°C at 25°C- Distance ratio: 11/1- Variable emissivity: 10 to 100% (see table)- Measurements: Max, Min; Difference and Average- High and low alarms
.Accessories.- Type K thermocouple, contact us for details
TIN-11 72x39x175 -60°C to +500°C 283,14 F
Part numberDimensions
(mm) Measurement rangePrice each
1 to 4
Optionalthermocouple
5+On request
1+List.
Qty.Disc.
DISCOUNTS
Lasertargeting
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1411HPC
Laser targeted thermometer
Emissivity values for common materials when using the TIN-11
Technical information TIN
Material EmissivityAsphalt, tarmac 0,98Bakery products 0,98Cereals 0,98Clay, dry 0,90Clay, wet or damp 0,98Cloth, synthetic 0,96Cloth, woven 0,80 - 0,95Concrete, dry 0,91Concrete, wet 0,98Confectionary 0,98Cork 0,98Dairy products 0,98Fatty products 0,98Fibreglass 0,98Flour 0,98Formica 0,94Fruit 0,98Fur 0,90Glass 0,90Gravel 0,98Jams, jellies 0,98Leather 0,96Linoleum 0,96Liquids (generally) 0,98Meat 0,98Metal, painted 0,75 - 0,95Oil 0,98Panels, fibre 0,92Panels, plastic 0,96Paper (writing or photocopier) 0,80Paper, wood pulp 0,80Pastry (flour + water) 0,98Plastic (generally) 0,95Plywood 0,90Rock, crushed 0,95Rugs, carpets (Wool cotton, synthetic) 0,98Sand 0,92Sauces 0,98Shingle 0,95Sweets 0,98Tiles (clay) 0,80Tiles (plastic) 0,95Vegetables 0,98Wood 0,90Wood, painted or plastic coated 0,96
142 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Fast digital portable infrared thermometersTIN-14N, TIN-15N, TIN-15/5
- A series of portable infrared thermometers for rapid diagnostics or general temperaturemeasurement. Special version available for glass surface measurement.
- Fast temperature measurement- High accuracy- Locking switch for continuous mode- Laser targeting - Large display with automatic back-light- Equipped with a laser source for easier
targeting of the object to be measured- An ergonomic design has resulted in several
features that make the thermometer easy touse; such as the locking switch that allow continuousreading and the easy to read display
- The TIN-14N model covers a temperature range of -32° to400°C
- The TIN-15N measures from -32° to +800°C and has a smallmeasuring target size (e.g. 20mm diameter at 1 metre)
- The TIN-15/5 has a spectral range that has been optimisedfor measuring the temperature of glass surfaces between150° and 1800°C
.Applications.- TIN14N and TIN15-N thermometers
Non metallic surfaces, metallic surfaces that are painted, varnished or anodised.- TIN15/5 thermometer
Glass surfaces
.Criteria for selecting a model.1 - Measuring range2 - Size of object whose temperature is to be measured
Distance ratio = Distance / spot diameterFor a distance ratio of 10:1, at a distance of 1000mm, the spot diameter will be 100mm
3 - The type of material whose temperature is to be measuredThe majority of non-metallic materials have an emissivity that is greater than 80%, with themajority being around 95%. Do you require a thermometer with variable emissivity or will onewith a fixed value of 95% suffice?
4 - Data logging facilitySome models have the possibility to record the measurements made so that they can berecalled for later use.
-32°Cto
1800°C
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1431HPC
Portable infrared thermometerFrom -32° to 400°C TIN
- Infrared thermometer with laser targeting- Targeting source: Laser class II- Latching button for continuous measurement- Last measured value is displayed for 10s (HOLD
function)- Display brightness adapts to ambient light
conditions- Display resolution: 0.1°C from -10° to 200°C in
AVERAGE mode, otherwise 1°C- Spectral range: 8 to 14µm- Response time (T90) : 300mS - Operating temperature: 0° to 55°C- Storage temperature: -20° to 70°C- Power supply: 9Vdc (battery or rechargeable cell)- Battery life: Approx 80 hours (25 hours if using laser)- Tripod mount: UNC 1/4”- Ingress protection: IP20- CE Marking: Approval to EMC directives applied for- Distance ratio (1m): 10:1- Aperture: 20mm- Accuracy (Tamb =23°C, Emissivity 100%): 2% of
measured value or 2°C (1)- Repeatability: 1% of measured value or 1°C (1)- Emissivity factor: 95% (fixed)
(1) Use the higher of the two values, 2°C below -10°C
TIN-14N -32°C to +400°C 340 364,03 F
Part numberWeight with battery
Measurement range (g)Price each
1 to 4
Diameter of measuring spot (mm)
Distance to target (mm)
The laser indicates a spot20mm higher than thecentre of the measuringspot
5+On request
1+List.
Qty.Disc.
DISCOUNTS
Lasertargeting
DISCONTINUED
144 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Portable infrared thermometerFrom -32° to +800°CTIN
- Infrared thermometer with laser targeting- Targeting source: Laser class II (no parallax)- Temperature displayed in °F or °C (selectable)- Variable emissivity: 20-100%- MIN, MAX and AVG modes (selectable)- Latching button for continuous measurement- Last measured value is displayed for 10s (HOLD function)- Display brightness adapts to ambient light conditions- Spectral range: 8 to 14µm - Aperture: 20mm- Response time (T90) : 150mS- Display resolution: 0.1°C- Accuracy (Tamb =23°C): 1% of measured value or 1°C (1)- Repeatability: 0.5% of measured value or 1°C (1)- Distance ratio (1m): 50:1- Close up lens: not available- Internal memory : 20 values - Alarms: High/Low- Temperature drift: 0.03%/°C (23°C)- Operating temperature: 0° to 55°C- Storage temperature: -20° to 70°C- Power supply: 9Vdc (battery or rechargeable cell)- Battery life: Approx 50 hours (15 hours if using laser)- Camera style mounting: UNC 1/4”- Ingress protection: IP20- CE Marking: Approval to EMC directives applied for
(1) Use the higher of the two values, 2°C below -10°C
TIN-15N -32°C to +800°C 340 800,87 F
Part numberWeight with battery
Measurement range (g)Price each
1 to 4
Diameter of measuring spot (mm)
Distance to target (mm)
The laserindicates thecentre of themeasuring spot
With memory
5+On request
1+List.
Qty.Disc.
DISCOUNTS
Lasertargeting
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1451HPC
Portable infrared thermometerFrom 150° to 1800°C TIN
- Infrared thermometer with laser targeting- Targeting source: Laser class II (no parallax)- Temperature displayed in °F or °C (selectable)- Variable emissivity: 20-100%- MIN, MAX and AVG modes (selectable)- Latching button for continuous measurement- Last measured value is displayed for 10s
(HOLD function)- Display brightness adapts to ambient light conditions- Spectral range: 8 ... 14µm (5,14µm for 15/5) - Aperture: 20mm- Response time (T90) : 150mS- Display resolution: 0.1°C- Accuracy (Tamb =23°C): 1% of measured value or 1°C (1)- Repeatability: 0.5% of measured value or 1°C (1)- Distance ratio (0.6m): 50:1- Close up lens: not available- Internal memory : no - Alarms: High only- Digital serial connection: RS232- Charger battery: yes- Temperature drift: 0.03%/°C (23°C)- Operating temperature: 0° to 55°C- Storage temperature: -20° to 70°C- Power supply: 9Vdc (battery or rechargeable cell)- Battery life: Approx 50 hours (15 hours if using laser)- Tripod mount: UNC 1/4”- Ingress protection: IP20- CE Marking: Approval to EMC directives applied for
(1) Use the higher of the two values, 2°C below -10°C
TIN-15/5 +150°C to +1800°C 340 1291,09 F
Part numberWeight with battery
Measurement range (g)Price each
1 to 4
Diameter of measuring spot (mm)
Distance to target (mm)
For glass
surface
5+On request
1+List.
Qty.Disc.
DISCOUNTS
146 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
High quality, fast reading portable thermometerTIGA 15
Portable short wavelength thermometer for non contact temperaturemeasurement of metals between 250 and 1800°C- Simple to operate- Easy to read LCD display- Laser targeting- Internal memory- Extended measuring range- High accuracy- Fast response, only 20ms- Measurement of small objects (down to 1.25mm)- Additional functions integrated- Serial data connection: USB2.0- Optional data analysis software (Portawin)- The TIGA-15 is an accurate, robust non-contact digital
thermometer with an internal memory(750 readings) for the measurementof the temperature of metals,ceramics, graphite etc across arange of 250 to 1800°C.
- The laser targeting source is used tocorrectly aim at the target, the sizeof the laser spot corresponds to thesize of the area whose temperature will be measured.
- The instrument can display maximum, minimum, average and difference values and is equippedwith an audible high alarm. The high quality optics enables the measurement of small objectsfrom as small as 4 mm, an optional close-up lens can measure objects as small as 1.25 mm.
- With the fast response time of only 20ms, even fast moving objects can be measured accurately.
.Typical applications.- Preheating, tempering, hardening, normalising - Forging, brazing - Sintering - Welding, rolling - Other foundry operations
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1471HPC
High quality portable infrared thermometerFrom 250° to 1800°C TIGA
- Infrared thermometer with laser targeting- Spectral range: 1.45 to 1.8µm- Sensor: InGaAs- Accuracy: 0.6% of measured value (Tamb = 23°C, Emissivity=100%)- Repeatability: 0.2% of measured value- Temperature drift: 0.01% of measured value per °C above 23°C- Response time (T90) : 20ms (with automatic adjustment for low temperatures)- Variable emissivity: 10-100% (adjustable in 1% increments)- Display update: 3 measurements per second- Resolution:
Display: 0.1°C (or °F) from 2500 to 999.9°C (482° to 999.9°F),1°C 1000°to 1800°C (1000°-3272°F)Digital signal: 0.1°C / 0.1°F
- Illuminated display in low ambient light conditions- Temperature units: °C or °F ( selectable) - Additional functions: MIN, MAX, AVG and DIF modes (selectable)- Alarm: Audible High alarm- Data storage: 750 measurements can be stored/displayed.
The display can show the measured value and the memory location. Additional informationavailable via the serial data connection includes; time/date, emissivity factor, unit of measureand the maximum and minimum values in the data set.
- Serial data connection: USB 2.0- Power supply: 9V battery (IEC 6LR61) or rechargeable cell (e.g. Varta 5622)- Battery life:
50 hours (Standard battery, no use of laser or display backlight)15 hours (Rechargeable cell, no use of laser or display backlight)
- Operating temperature: 0° to 60°C- Storage temperature: -20° to 70°C- Housing: ABS- Tripod mount: UNC 1/4” - Ingress protection: IP20- CE Marking: Conforms to EMC Directives
TIGA-15 +250°C to +1800°C 340 2095,21 F
Part numberWeight with battery
Measurement range (g)Price each
1 to 4
Diameter of measuring spot (mm)
Distance to target (mm)
5+On request
1+List.
Qty.Disc.
DISCOUNTS
Springs
p.167 p.180 p.188
Extension spring Die spring Dynamic washer
p.150
p.154
Gas spring
Compressionspring
Extension springspage 167
Extension of range
Morepart
number
Morepart
number
150 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
REFERENCE ? ? ? ?Prix Uni.
1 à ?Size 6GSI-15-060-50GSI-15-100-80GSI-15-150-100Size 10GSI-22-50-80GSI-22-100-100GSI-22-150-200GSI-22-200-300GSI-22-250-400
060100150
050100150200250
149229329
164264364464564
151515
2222222222
666
1010101010
6,16,16,1
8,18,18,18,18,1
101010
1414141414
161616
2020202020
666
1010101010
050080100
080100200300400
Part number Stroke L ØD1 ØD2 ØN A P EForce
(N)
214,09 F
225,23 F
244,33 F
262,95 F
276,89 F
292,32 F
309,04 F
318,67 F
Price each1 to 2
Gas springStainless steelGSI
- Stainless steel gas spring- Materials:
Body/rod: stainless steelRod-end: stainless steel
- Works in compression (push) mode- Refilling fluid: nitrogen oil- Working temperature: -20°C to 80°C- Operating Fluids: Nitrogen gas and oil
Size 6: approx 10mmSize 10: approx 20mm
- Filling tolerance: -20N to +40N
Important: Spring must bemounted with piston pointingdown
.Option.- Preset forces available to order (for
orders of 5 or more):Size 6: 10N to 400NSize 10: 80N to 1300N
.Uses.- Facilitates opening and closing of a
bonnet or boot
N
A
P
ØD2Stroke
L+/-2mm extendedØD1
P
Thickness E
1+List
3+-10%
6+-15%
10+On request
Qty.Disc.
DISCOUNTS
400 N
Fast delivery
stainless steel
newdiscounts
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1511HPC
Adjustable gas springStainless steel GSIA
- Stainless steel gas spring- Materials:
Body/rod: stainless steelRod-end: stainless steel
- Works in compression (push) mode- Refilling fluid: nitrogen oil- Working temperature: -20°C to 80°C- Operating Fluids: Nitrogen gas and oil
Size 6: approx 10mmSize 10: approx 20mm
- Filling tolerance: -20N to +40N
Important: Spring must bemounted with piston pointingdown
.Adjustment.- Springs are pre-filled to reach
the stated force. Gas should be releasedusing the valve to achieve the forcerequired
- NOTE once the gas has been released,spring cannot be refilled.
.Uses.- Facilitates opening and closing
of a bonnet or boot
REFERENCE ? ? ? ?Prix Uni.
1 à ?Size 6GSI-15-060-400AGSI-15-100-400AGSI-15-150-400ASize 10GSI-22-050-1000AGSI-22-100-1000AGSI-22-150-1000AGSI-22-200-1000AGSI-22-250-1000AReticule adjusting screwGSI-15-U5GSI-22-U8
060100150
050100150200250
149229329
164264364464564
151515
2222222222
666
1010101010
6,16,16,1
8,18,18,18,18,1
101010
1414141414
161616
2020202020
666
1010101010
400400400
10001000100010001000
For gas spring GSI-15For gas spring GSI-22
Part number Stroke L ØD1 ØD2 ØN A P EForce
(N)
214,09 F
225,23 F
244,33 F
262,95 F
276,89 F
292,32 F
309,04 F
318,65 F
15,63 F
15,63 F
Price each1 to 2
N
A
P
ØD2Stroke
L+/-2mm extendedØD1
P
Thickness E
1+List
3+-10%
6+-15%
10+On request
Qty.Disc.
DISCOUNTS
1000 N
Regulation: implementation with reticuleadjusting screw
2 3 41
stainless steel
newdiscounts
152 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
97,78 F
98,35 F
98,35 F
100,78 F
107,02 F
108,60 F
110,51 F
112,13 F
Part numberL
(mm)L1
(mm)ØD1(mm)
ØD2(mm)
ØT ØN(mm)
P(mm)
E(mm)
Priceeach1 to 5
Stroke(mm)
Oil zone length(mm)
Force(N)
160240340440
264364464564
100140190240
164214264314
15151515
18181818
6666
8888
M5M5M5M5
M6M6M6M6
6666
8888
17171717
21212121
8888
10101010
60100150200
100150200250
20202020
30303030
5080
100200
100200300400
���-
����
GA6060050GA6100080GA6150100GA6200200
GA8100100GA8150200GA8200300GA8250400
Size 6
Size 8
Stock*
*Depending on availability
Gas springFixed force, 50 to 400NGA6
GA8- Gas spring- Works in compression (push)
mode- Operating fluid: Gas (Nitrogen)
and oil- Materials:
Rod: Chrome-plated steelBody: SteelRod end: Nylon
- Spring must be mounted withpiston pointing down
- Size 6: from 50N to 400N- Size 8: from 100N to 540N
.Uses.- Opening of bonnets or boots- Saves effort
400 N
ØTØT
99
ØD2ØD1
L1CourseL
PØN
Threadedend
Threadedend
E
1+List
6+-10%
10+-15%
15+-20%
20+On request
Qty.Disc.
DISCOUNTS
Supplied with
nylon end
newdiscounts
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1531HPC
97,78 F
98,35 F
98,35 F
100,78 F
107,02 F
108,60 F
110,51 F
112,13 F
Part numberL
(mm)L1
(mm)ØD1(mm)
ØD2(mm)
ØT ØN(mm)
P(mm)
E(mm)
Priceeach1 to 5
Stroke(mm)
Oil zone length(mm)
Force(N)
160240340440
264364464564
95135185235
159209259309
15151515
18181818
6666
8888
M5M5M5M5
M6M6M6M6
6666
8888
17171717
21212121
8888
10101010
60100150200
100150200250
20202020
30303030
50-40080-400
100-400200-400
100-650100-650100-650100-650
����
����
GA6060AGA6100AGA6150AGA6200A
GA8100AGA8150AGA8200AGA8250A
Size 6
Size 8
Stock*
*Depending on availability
Adjustable gas springForce adjustable up to 650N GA6A
GA8A- Gas spring- Works in compression (push)
mode- Operating fluid: Gas (Nitrogen)
and oil- Materials:
Rod: Chrome-plated steelBody: SteelRod end: Nylon
- Size 6: from 50N to 400N- Size 8: from 100N to 540N- Spring must be mounted with
piston pointing down- Adjustment: Gas should be
released using the valve toachieve the force required.
- NOTE once the gas hasbeen released, spring
cannot be refilled
.Uses.- Opening of bonnets or boots- Saves effort
!
650 N
ØTØT
99
ØD2ØD1
L1Stroke
L
Threadedend
Threadedend
PØN E
1+List
6+-10%
10+-15%
15+-20%
20+On request
Qty.Disc.
DISCOUNTS
Supplied with
nylon end
newdiscounts
154 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
0,50 3,00 3,50 4,40 9,94 0,90 8,930,50 3,00 5,50 6,10 6,37 1,40 8,930,50 3,00 8,50 8,70 4,12 2,20 8,930,50 3,00 12,50 12,00 2,81 3,00 8,930,50 3,00 18,50 17,50 1,90 4,70 8,930,50 3,70 3,50 5,50 4,78 1,80 8,590,50 3,70 5,50 7,90 3,03 2,80 8,590,50 3,70 8,50 11,50 1,96 4,40 8,590,50 3,70 12,50 16,00 1,34 6,20 8,590,50 3,70 18,50 23,50 0,90 9,50 8,590,50 4,50 3,50 7,00 2,43 3,30 8,000,50 4,50 5,50 10,00 1,55 4,90 8,000,50 4,50 8,50 15,00 1,00 7,90 8,000,50 4,50 12,50 21,50 0,68 11,70 8,000,50 4,50 18,50 31,00 0,46 17,00 8,000,50 5,50 3,50 9,40 1,25 5,50 6,910,50 5,50 5,50 14,00 0,80 8,60 6,910,50 5,50 8,50 20,50 0,52 12,90 6,910,50 5,50 12,50 30,00 0,35 19,40 6,910,50 5,50 18,50 44,50 0,23 29,40 6,91
�����-��������������
Part numberCD2110CD2111CD2112CD2113CD2114CD2115CD2116CD2117CD2118CD2119CD2120CD2121CD2122CD2123CD2124CD2125CD2126CD2127CD2128CD2129
External N° Free Rate Max. Max.Wire Ø Ø active length C deflection load
d D0 coils Lo N/mm Sn (mm) Fn (N)Price each
1 to 45,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
Stock*
Compression spring DIN 2095Stainless steel piano wireCD
Lo
Fn
Ød
- Materials: Piano wire conforming to DIN17224 No 1.4310 BS 2056 EN58ACommercial stainless steel annealed 302
- Wrapping: right hand- Ends:
Wire ≤ 0.8mm squared, not groundWire > 0.8mm squared and ground
- Loads: Load values indicated arebased on a life of 50,000 cycles at50% of max. load
- Tolerances: All sizes and strengthsin accordance with DIN 2095(Grade 2)
.Info..- Please contact us for custom made
springs for your application.(Minimum order quantities mayapply)
Sn
5+-10%
20+-20%
50+-25%
125+-50%
250+On request
1+List
Qty.Disc.
DISCOUNTS
250+ pieces,
contact us
ØD0
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1551HPC
Part numberCD2130CD2131CD2132CD2133CD2134CD2135CD2136CD2137CD2138CD2139CD2140CD2141CD2142CD2143CD2144CD2145CD2146CD2147CD2148CD2149CD2150CD2151CD2152CD2153CD2154CD2155CD2156CD2157CD2158CD2159CD2160CD2161CD2162CD2163CD2164CD2165CD2166CD2167CD2168CD2169CD2170CD2171CD2172CD2173CD2174
Price each1 to 4
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
4,45 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,38 F
5,48 F
5,48 F
5,48 F
0,50 6,80 3,50 13,50 0,63 9,20 5,640,50 6,80 5,50 20,00 0,40 14,00 5,640,50 6,80 8,50 30,00 0,26 21,30 5,640,50 6,80 12,50 44,00 0,18 31,80 5,640,50 6,80 18,50 65,00 0,12 47,60 5,640,63 3,83 3,50 5,50 12,04 1,50 18,000,63 3,83 5,50 7,80 7,64 2,40 18,000,63 3,83 8,50 11,00 4,96 3,50 18,000,63 3,83 12,50 15,50 3,38 5,20 18,000,63 3,83 18,50 22,50 2,28 7,80 18,000,63 4,63 3,50 6,70 6,15 2,40 14,800,63 4,63 5,50 9,60 3,91 3,80 14,800,63 4,63 8,50 14,00 2,53 5,80 14,800,63 4,63 12,50 20,00 1,72 8,70 14,800,63 4,63 18,50 29,00 1,16 12,80 14,800,63 5,63 3,50 8,50 3,17 4,20 13,300,63 5,63 5,50 12,50 2,02 6,70 13,300,63 5,63 8,50 18,50 1,30 10,30 13,300,63 5,63 12,50 26,00 0,88 14,70 13,300,63 5,63 18,50 38,50 0,60 22,30 13,300,63 6,93 3,50 11,50 1,57 6,90 10,700,63 6,93 5,50 17,00 1,00 10,80 10,700,63 6,93 8,50 25,50 0,65 16,60 10,700,63 6,93 12,50 36,50 0,44 24,20 10,700,63 6,93 18,50 54,00 0,29 36,30 10,700,63 8,63 3,50 16,00 0,76 10,90 8,600,63 8,63 5,50 24,50 0,49 17,40 8,600,63 8,63 8,50 37,00 0,32 26,80 8,600,63 8,63 12,50 55,00 0,21 40,70 8,600,63 8,63 18,50 80,50 0,15 59,90 8,600,80 4,80 3,50 6,90 15,92 1,70 27,400,80 4,80 5,50 9,70 10,20 2,70 27,400,80 4,80 8,50 14,00 6,59 4,20 27,400,80 4,80 12,50 19,50 4,48 6,00 27,400,80 4,80 18,50 28,00 3,02 8,90 27,400,80 5,80 3,50 8,30 8,19 2,70 22,300,80 5,80 5,50 12,00 5,21 4,30 22,300,80 5,80 8,50 17,50 3,37 6,60 22,300,80 5,80 12,50 24,50 2,29 9,40 22,300,80 5,80 18,50 36,00 1,55 14,50 22,300,80 7,10 3,50 10,50 4,10 4,90 20,600,80 7,10 5,50 15,50 2,60 7,80 20,600,80 7,10 8,50 23,00 1,68 12,10 20,600,80 7,10 12,50 33,00 1,14 17,90 20,600,80 7,10 18,50 48,00 0,77 26,50 20,60
�����-���-�������������������������-���������
External N° Free Rate Max. Max.Wire Ø Ø active length C deflection load
d D0 coils Lo N/mm Sn (mm) Fn (N)Stock*
CD
*Depending on availability
156 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
0,80 8,80 3,50 14,50 1,99 8,40 16,700,80 8,80 5,50 21,50 1,27 13,10 16,700,80 8,80 8,50 32,00 0,82 20,00 16,700,80 8,80 12,50 47,00 0,56 30,30 16,700,80 8,80 18,50 68,00 0,38 44,20 16,700,80 10,80 3,50 20,00 1,03 13,10 13,200,80 10,80 5,50 30,00 0,65 20,20 13,200,80 10,80 8,50 45,50 0,42 31,20 13,200,80 10,80 12,50 66,00 0,28 46,10 13,200,80 10,80 18,50 96,50 0,20 68,00 13,201,00 6,00 3,50 8,50 20,00 1,90 38,001,00 6,00 5,50 12,00 12,72 3,00 38,001,00 6,00 8,50 17,00 8,22 4,40 38,001,00 6,00 12,50 24,00 5,59 6,60 38,001,00 6,00 18,50 34,50 3,78 9,90 38,001,00 7,30 3,50 10,00 9,94 2,70 29,001,00 7,30 5,50 14,50 6,35 4,40 29,001,00 7,30 8,50 21,50 4,11 7,20 29,001,00 7,30 12,50 30,50 2,80 10,60 29,001,00 7,30 18,50 43,50 1,89 15,20 29,00
����������-���������
Part numberCD2175CD2176CD2177CD2178CD2179CD2180CD2181CD2182CD2183CD2184CD2185CD2186CD2187CD2188CD2189CD2190CD2191CD2192CD2193CD2194
External N° Free Rate Max. Max.Wire Ø Ø active length C deflection load
d D0 coils Lo N/mm Sn (mm) Fn (N)Price each
1 to 45,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
5,48 F
7,23 F
7,23 F
7,23 F
7,23 F
7,23 F
7,23 F
7,23 F
7,23 F
7,23 F
7,23 F
Stock*
- Materials: Piano wire conforming to DIN 17224 No1.4310 BS 2056 EN58ACommercial stainless steel annealed 302
- Wrapping: right hand- Ends:
Wire ≤ 0.8mm squared, not groundWire > 0.8mm squared and ground
- Loads: Load values indicated arebased on a life of 50,000 cycles at50% of max. load
- Tolerances: All sizes and strengthsin accordance with DIN 2095(Grade 2)
.Info..- Please contact us for custom made
springs for your application.(Minimum order quantities may apply)
250+ pieces,
contact us
Lo
Fn
Ød
ØD0
Sn
Compression spring DIN 2095Stainless steel piano wireCD
5+-10%
20+-20%
50+-25%
125+-50%
250+On request
1+List
Qty.Disc.
DISCOUNTS
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1571HPC
Part numberCD2195CD2196CD2197CD2198CD2199CD2200CD2201CD2202CD2203CD2204CD2205CD2206CD2207CD2208CD2209CD2210CD2211CD2212CD2213CD2214CD2215CD2216CD2217CD2218CD2219CD2220CD2221CD2222CD2223CD2224CD2225CD2226CD2227CD2228CD2229CD2230CD2231CD2232CD2233CD2234CD2235CD2236CD2237CD2238CD2239
Price each1 to 4
7,23 F
7,23 F
7,23 F
7,23 F
7,23 F
7,23 F
7,23 F
7,23 F
7,23 F
7,23 F
7,23 F
7,23 F
7,23 F
7,23 F
7,23 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
1,00 9,00 3,50 13,00 4,88 5,70 28,001,00 9,00 5,50 19,00 3,10 8,90 28,001,00 9,00 8,50 28,50 2,00 14,20 28,001,00 9,00 12,50 40,50 1,37 20,60 28,001,00 9,00 18,50 59,00 0,93 30,70 28,001,00 11,00 3,50 17,50 2,49 9,50 23,001,00 11,00 5,50 26,00 1,59 14,80 23,001,00 11,00 8,50 39,00 1,03 23,00 23,001,00 11,00 12,50 56,00 0,70 33,60 23,001,00 11,00 18,50 81,50 0,47 49,50 23,001,00 13,50 3,50 24,00 1,28 14,60 19,001,00 13,50 5,50 36,50 0,82 23,10 19,001,00 13,50 8,50 55,50 0,52 36,10 19,001,00 13,50 12,50 80,50 0,35 53,10 19,001,00 13,50 18,50 115,00 0,24 75,60 19,001,25 7,55 3,50 12,00 24,93 4,80 114,001,25 7,55 5,50 17,00 15,49 7,20 114,001,25 7,55 8,50 25,00 10,10 11,20 114,001,25 7,55 12,50 35,50 6,95 16,30 114,001,25 7,55 18,50 51,50 4,63 24,20 114,001,25 9,25 3,50 15,00 12,30 7,60 90,001,25 9,25 5,50 22,00 7,66 11,50 90,001,25 9,25 8,50 33,00 5,01 18,10 90,001,25 9,25 12,50 47,50 3,40 26,50 90,001,25 9,25 18,50 69,00 2,31 39,00 90,001,25 11,25 3,50 20,00 6,09 12,30 73,001,25 11,25 5,50 29,50 3,87 18,70 73,001,25 11,25 8,50 44,50 2,51 29,30 73,001,25 11,25 12,50 64,00 1,71 42,90 73,001,25 11,25 18,50 93,50 1,15 63,50 73,001,25 13,75 3,50 27,00 3,12 18,80 59,001,25 13,75 5,50 41,50 1,98 29,90 59,001,25 13,75 8,50 62,50 1,28 46,00 59,001,25 13,75 12,50 90,50 0,88 67,40 59,001,25 13,75 18,50 130,00 0,59 97,10 59,001,25 17,25 3,50 40,50 1,49 31,40 46,001,25 17,25 5,50 62,00 0,94 49,10 46,001,25 17,25 8,50 94,00 0,62 75,50 46,001,25 17,25 12,50 140,00 0,41 114,00 46,001,25 17,25 18,50 205,00 0,27 168,00 46,001,60 9,60 3,50 14,50 32,00 5,50 182,001,60 9,60 5,50 21,50 20,38 8,90 182,001,60 9,60 8,50 31,50 13,23 13,60 182,001,60 9,60 12,50 45,00 8,93 20,20 182,001,60 9,60 18,50 65,50 6,06 30,30 182,00
�������������������������������������������-�
External N° Free Rate Max. Max.Wire Ø Ø active length C deflection load
d D0 coils Lo N/mm Sn (mm) Fn (N)Stock*
CD
*Depending on availability
158 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
1,60 11,60 3,50 18,50 16,42 9,10 146,001,60 11,60 5,50 27,00 10,44 13,80 146,001,60 11,60 8,50 40,50 6,76 21,60 146,001,60 11,60 12,50 58,50 4,58 32,00 146,001,60 11,60 18,50 85,00 3,10 47,10 146,001,60 14,10 3,50 24,00 8,38 14,00 116,001,60 14,10 5,50 36,00 5,35 21,90 116,001,60 14,10 8,50 53,50 3,47 33,40 116,001,60 14,10 12,50 78,00 2,34 50,00 116,001,60 14,10 18,50 115,00 1,58 75,10 116,001,60 17,60 3,50 34,00 3,99 23,00 91,001,60 17,60 5,50 51,50 2,53 36,00 91,001,60 17,60 8,50 77,50 1,65 55,30 91,001,60 17,60 12,50 110,00 1,12 78,80 91,001,60 17,60 18,50 165,00 0,76 120,00 91,001,60 21,60 3,50 48,00 2,04 35,60 73,001,60 21,60 5,50 73,50 1,31 55,90 73,001,60 21,60 8,50 110,00 0,85 84,50 73,001,60 21,60 12,50 165,00 0,58 129,00 73,001,60 21,60 18,50 240,00 0,39 188,00 73,002,00 12,00 3,50 18,00 40,00 6,80 273,002,00 12,00 5,50 26,50 25,52 10,90 273,002,00 12,00 8,50 38,50 16,51 16,50 273,002,00 12,00 12,50 55,00 11,20 24,40 273,002,00 12,00 18,50 79,50 7,67 36,10 273,002,00 14,50 3,50 22,50 20,55 10,80 218,002,00 14,50 5,50 33,00 13,06 16,60 218,002,00 14,50 8,50 49,50 8,43 26,00 218,002,00 14,50 12,50 71,00 5,75 38,00 218,002,00 14,50 18,50 105,00 3,88 57,80 218,00
���-��������������������������
Part numberCD2240CD2241CD2242CD2243CD2244CD2245CD2246CD2247CD2248CD2249CD2250CD2251CD2252CD2253CD2254CD2255CD2256CD2257CD2258CD2259CD2260CD2261CD2262CD2263CD2264CD2265CD2266CD2267CD2268CD2269
External N° Free Rate Max. Max.Wire Ø Ø active length C deflection load
d D0 coils Lo N/mm Sn (mm) Fn (N)Price each
1 to 47,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
7,71 F
12,92 F
12,92 F
8,91 F
8,91 F
8,91 F
8,91 F
8,91 F
8,91 F
8,91 F
8,91 F
9,83 F
9,83 F
Stock*
Fn
ØD0
LoØd
- Materials: Piano wire conforming to DIN 17224No 1.4310 BS 2056 EN58ACommercial stainless steel annealed 302
- Wrapping: right hand- Ends:
Wire ≤ 0.8mm squared, not groundWire > 0.8mm squared and ground
- Loads: Load values indicated are based on a lifeof 50,000 cycles at 50% of max. load
- Tolerances: All sizes and strengths in accordancewith DIN 2095 (Grade 2)
- Custom designs: Please contact us for custommade springs for your application. (Minimumorder quantities may apply)
Sn
Compression spring DIN 2095Stainless steel piano wireCD
5+-10%
20+-20%
50+-25%
125+-50%
250+On request
1+List
Qty.Disc.
DISCOUNTS
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1591HPC
2,00 18,00 3,5 30,00 9,77 17,50 170,002,00 18,00 5,5 45,00 6,22 27,30 170,002,00 18,00 8,5 68,00 4,03 42,50 170,002,00 18,00 12,5 98,00 2,74 62,10 170,002,00 18,00 18,5 145,00 1,86 93,60 170,002,00 22,00 3,5 41,00 5,01 27,40 137,002,00 22,00 5,5 62,00 3,19 42,80 137,002,00 22,00 8,5 94,00 2,05 66,40 137,002,00 22,00 12,5 135,00 1,40 96,20 137,002,00 22,00 18,5 200,00 0,95 144,00 137,002,00 27,00 3,5 58,00 2,56 43,00 110,002,00 27,00 5,5 88,50 1,63 67,10 110,002,00 27,00 8,5 135,00 1,06 104,00 110,002,00 27,00 12,5 195,00 0,71 151,00 110,002,00 27,00 18,5 290,00 0,49 227,00 110,002,20 11,00 3,5 16,20 85,89 3,50 292,002,20 11,00 5,5 23,00 54,58 5,30 292,002,20 11,00 9,5 36,50 31,67 9,10 292,002,20 11,00 15,5 56,80 19,38 15,10 292,00
Part numberCD2270CD2271CD2272CD2273CD2274CD2275CD2276CD2277CD2278CD2279CD2280CD2281CD2282CD2283CD2284CD2285CD2286CD2287CD2288
External N° Free Rate Max. Max.Wire Ø Ø active length C deflection load
d D0 coils Lo N/mm Sn (mm) Fn (N)Price each
1 to 47,75 F
7,75 F
7,75 F
7,99 F
8,49 F
7,75 F
7,75 F
7,99 F
8,49 F
8,49 F
7,75 F
7,99 F
8,49 F
8,49 F
8,98 F
8,49 F
8,49 F
8,49 F
8,49 F
- Material: Piano springs: Stainless steel conforming to DIN17224 CrNiAl 17.7
- Right hand wound- Ends:
Wire ≤ 0.8mm squared, not groundWire > 0.8mm, squared and ground
- Operating temperature : 60°C max- These springs are recommended for
static or medium dynamic loads- Tolerances: All the dimensions and
load values given conform to DIN2095 (Grade 2)
.Info..- These springs have no preset load- Free length Lo will reduce slightly
after first use- For custom made springs, please contact
us (Minimum quantity may apply)
5+-5%
20+-10%
50+-15%
75+On request
1+List
Qty.Disc.
DISCOUNTS
75+ pieces,
contact us
Lo
Fn
Ød
ØD0
Sn
Stainless steel piano wire CDCompression spring DIN 2095
Extension of range
160 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
2,20 15,00 3,50 20,00 27,88 7,60 222,002,20 15,00 5,50 30,20 17,77 12,50 222,002,20 15,00 9,50 48,90 10,27 21,60 222,002,20 24,00 3,50 39,20 5,64 25,00 142,002,20 24,00 5,50 59,10 3,60 39,50 142,002,50 15,00 3,50 22,00 50,12 8,00 402,002,50 15,00 5,50 32,00 31,93 12,50 402,002,50 15,00 8,50 47,50 20,64 19,70 402,002,50 15,00 12,50 67,50 13,98 28,80 402,002,50 15,00 18,50 98,00 9,43 42,90 402,002,50 18,50 3,50 27,50 23,83 12,90 313,002,50 18,50 5,50 41,00 15,16 20,50 313,002,50 18,50 8,50 61,00 9,85 31,70 313,002,50 18,50 12,50 88,00 6,68 46,90 313,002,50 18,50 18,50 130,00 4,51 71,10 313,002,50 22,50 3,50 36,00 12,21 20,50 251,002,50 22,50 5,50 54,00 7,77 32,10 251,002,50 22,50 8,50 81,50 5,02 50,00 251,002,50 22,50 12,50 120,00 3,42 75,70 251,002,50 22,50 18,50 175,00 2,31 111,00 251,00
Part numberCD2289CD2290CD2291CD2292CD2293CD2294CD2295CD2296CD2297CD2298CD2299CD2300CD2301CD2302CD2303CD2304CD2305CD2306CD2307CD2308
External N° Free Rate Max. Max.Wire Ø Ø active length C deflection load
d D0 coils Lo N/mm Sn (mm) Fn (N)Price each
1 to 48,49 F
8,49 F
8,49 F
8,49 F
8,49 F
8,70 F
8,70 F
8,70 F
8,70 F
8,70 F
8,70 F
8,70 F
8,70 F
8,70 F
8,98 F
8,70 F
8,70 F
8,70 F
8,98 F
8,98 F
Extension of range
- Material : Piano springs: Stainless steel conforming to DIN17224 CrNiAl 17.7
- Right hand wound- Ends:
Wire ≤ 0.8mm squared, not groundWire > 0.8mm, squared and ground
- Operating temperature : 60°C max- These springs are recommended for
static or medium dynamic loads- Tolerances: All the dimensions and
load values given conform to DIN2095 (Grade 2)
.Info..- These springs have no preset load- Free length Lo will reduce slightly after
first use- For custom made springs, please contact
us (Minimum quantity may apply)
75+ pieces,
contact us
Lo
Fn
Ød
ØD0
Sn
Compression spring DIN 2095Stainless steel piano wireCD
5+-5%
20+-10%
50+-15%
75+On request
1+List
Qty.Disc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1611HPC
Part numberCD2309CD2310CD2311CD2312CD2313CD2314CD2315CD2316CD2317CD2318CD2319CD2320CD2321CD2322CD2323CD2324CD2325CD2326CD2327CD2328CD2329CD2330CD2331CD2332CD2333CD2334CD2335CD2336CD2337CD2338CD2339CD2340CD2341CD2342CD2343CD2344CD2345CD2346CD2347CD2348CD2349CD2350CD2351CD2352
Price each1 to 4
8,70 F
8,70 F
8,70 F
8,98 F
8,98 F
8,98 F
8,98 F
8,98 F
8,98 F
9,28 F
8,98 F
8,98 F
8,98 F
8,98 F
8,98 F
8,98 F
8,98 F
8,98 F
8,98 F
8,98 F
8,98 F
8,98 F
8,98 F
8,98 F
8,98 F
8,98 F
8,98 F
8,98 F
8,98 F
8,98 F
8,98 F
8,98 F
8,98 F
9,28 F
8,98 F
8,98 F
9,28 F
9,28 F
9,28 F
8,98 F
8,98 F
8,98 F
9,28 F
9,28 F
2,50 27,50 3,5 49,00 6,26 32,20 200,002,50 27,50 5,5 74,50 3,99 50,50 200,002,50 27,50 8,5 115,00 2,58 80,20 200,002,50 27,50 12,5 165,00 1,75 116,00 200,002,50 27,50 18,5 240,00 1,19 169,00 200,002,50 34,50 3,5 71,50 2,99 52,20 156,002,50 34,50 5,5 110,00 1,91 82,10 156,002,50 34,50 8,5 170,00 1,23 129,00 156,002,50 34,50 12,5 245,00 0,83 87,00 156,002,50 34,50 18,5 360,00 0,57 276,00 156,002,80 14,00 3,5 20,50 109,50 4,10 446,002,80 14,00 5,5 29,00 66,48 6,70 446,002,80 14,00 9,5 45,90 40,27 11,10 446,002,80 14,00 15,5 71,40 24,68 18,00 446,002,80 20,00 3,5 27,20 30,16 11,00 326,002,80 20,00 5,5 39,50 19,20 17,00 326,002,80 20,00 9,5 64,20 11,11 29,00 326,002,80 30,00 3,5 47,00 7,63 29,00 222,002,80 30,00 5,5 70,70 4,85 45,00 222,003,20 19,20 3,5 27,50 63,84 9,70 620,003,20 19,20 5,5 40,00 40,69 15,10 620,003,20 19,20 8,5 59,00 26,36 23,60 620,003,20 19,20 12,5 83,50 17,86 34,50 620,003,20 19,20 18,5 120,00 12,13 50,60 620,003,20 23,20 3,5 33,50 32,77 15,00 496,003,20 23,20 5,5 49,50 20,80 23,60 496,003,20 23,20 8,5 74,00 13,48 36,90 496,003,20 23,20 12,5 105,00 9,18 53,40 496,003,20 23,20 18,5 155,00 6,19 81,80 496,003,20 28,20 3,5 42,50 16,68 23,40 396,003,20 28,20 5,5 63,50 10,62 37,20 396,003,20 28,20 8,5 94,50 6,89 57,40 396,003,20 28,20 12,5 135,00 4,68 83,40 396,003,20 28,20 18,5 200,00 3,16 127,00 396,003,20 35,20 3,5 58,50 8,00 38,70 310,003,20 35,20 5,5 88,50 5,08 61,10 310,003,20 35,20 8,5 135,00 3,28 96,20 310,003,20 35,20 12,5 190,00 2,24 136,00 310,003,20 35,20 18,5 280,00 1,51 203,00 310,003,20 43,20 3,5 82,00 4,09 60,80 247,003,20 43,20 5,5 125,00 2,60 95,30 247,003,20 43,20 8,5 190,00 1,68 148,00 247,003,20 43,20 12,5 275,00 1,14 216,00 247,003,20 43,20 18,5 405,00 0,77 321,00 247,00
External N° Free Rate Max. Max.Wire Ø Ø active length C deflection load
d D0 coils Lo N/mm Sn (mm) Fn (N)
CD
162 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
4,00 24,00 3,50 33,50 79,94 11,30 918,004,00 24,00 5,50 49,00 50,87 18,00 918,004,00 24,00 8,50 72,00 32,93 27,80 918,004,00 24,00 12,50 105,00 22,41 43,30 918,004,00 24,00 18,50 150,00 15,07 62,30 918,004,00 29,00 3,50 41,00 40,93 18,10 732,004,00 29,00 5,50 60,50 26,02 28,30 732,004,00 29,00 8,50 89,50 16,84 43,50 732,004,00 29,00 12,50 130,00 1,46 65,50 732,004,00 29,00 18,50 185,00 7,75 92,90 732,004,00 36,00 3,50 53,50 19,54 29,50 572,004,00 36,00 5,50 79,50 12,39 46,20 572,004,00 36,00 8,50 120,00 8,03 72,80 572,004,00 36,00 12,50 170,00 5,45 104,00 572,004,00 36,00 18,50 250,00 3,69 156,00 572,004,00 44,00 3,50 71,00 10,02 45,80 458,004,00 44,00 5,50 105,00 6,36 69,90 458,004,00 44,00 8,50 160,00 4,11 110,00 458,004,00 44,00 12,50 235,00 2,80 165,00 458,004,00 44,00 18,50 340,00 1,89 240,00 458,00
Part numberCD2353CD2354CD2355CD2356CD2357CD2358CD2359CD2360CD2361CD2362CD2363CD2364CD2365CD2366CD2367CD2368CD2369CD2370CD2371CD2372
External N° Free Rate Max. Max.Wire Ø Ø active length C deflection load
d D0 coils Lo N/mm Sn (mm) Fn (N)Price each
1 to 48,98 F
8,98 F
8,98 F
8,98 F
9,28 F
15,26 F
15,26 F
15,26 F
15,26 F
15,26 F
15,26 F
15,26 F
15,26 F
15,26 F
15,26 F
15,26 F
15,26 F
15,89 F
17,20 F
17,20 F
- Material : Piano springs: Stainless steel conforming to DIN17224 CrNiAl 17.7
- Right hand wound- Ends:
Wire ≤ 0.8mm squared, not groundWire > 0.8mm, squared and ground
- Operating temperature : 60°C max- These springs are recommended for
static or medium dynamic loads- Tolerances: All the dimensions and
load values given conform to DIN2095 (Grade 2)
.Info..- These springs have no preset load- Free length Lo will reduce slightly
after first use- For custom made springs, please contact
us (Minimum quantity may apply)
75+ pieces,
contact us
Lo
Fn
Ød
ØD0
Sn
Compression spring DIN 2095Stainless steel piano wireCD
Extension of range
5+-5%
20+-10%
50+-15%
75+On request
1+List
Qty.Disc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1631HPC
Part numberCD2373CD2374CD2375CD2376CD2377CD2378CD2379CD2380CD2381CD2382CD2383CD2384CD2385CD2386CD2387CD2388CD2389CD2390CD2391CD2392CD2393CD2394CD2395CD2396CD2397CD2398CD2399CD2400CD2401CD2402CD2403CD2404CD2405CD2406CD2407CD2408CD2409CD2410CD2411CD2412CD2413CD2414CD2415CD2416CD2417
Price each1 to 4
15,26 F
15,26 F
15,89 F
17,20 F
17,20 F
15,26 F
15,26 F
16,13 F
16,13 F
16,30 F
15,26 F
16,13 F
16,13 F
16,30 F
17,20 F
15,26 F
15,26 F
16,30 F
16,30 F
17,94 F
15,26 F
15,26 F
16,30 F
16,30 F
17,94 F
15,26 F
16,30 F
17,94 F
18,51 F
20,75 F
16,13 F
16,13 F
17,94 F
18,51 F
20,18 F
16,13 F
16,30 F
17,20 F
17,20 F
20,75 F
16,13 F
18,51 F
19,00 F
20,75 F
22,88 F
4,00 54,00 3,50 99,00 5,11 71,60 367,004,00 54,00 5,50 150,00 3,26 111,00 367,004,00 54,00 8,50 230,00 2,10 175,00 367,004,00 54,00 12,50 335,00 1,43 257,00 367,004,00 54,00 18,50 490,00 0,97 379,00 367,005,00 30,00 3,50 41,00 100,23 13,40 1348,005,00 30,00 5,50 60,00 63,59 21,50 1348,005,00 30,00 8,50 87,50 41,11 32,60 1348,005,00 30,00 12,50 125,00 27,99 48,30 1348,005,00 30,00 18,50 180,00 18,87 71,00 1348,005,00 37,00 3,50 51,00 47,59 22,30 1053,005,00 37,00 5,50 75,00 30,31 34,80 1053,005,00 37,00 8,50 110,00 19,63 52,50 1053,005,00 37,00 12,50 160,00 13,30 79,50 1053,005,00 37,00 18,50 230,00 9,01 115,00 1053,005,00 45,00 3,50 64,00 24,34 34,40 843,005,00 45,00 5,50 95,50 15,49 54,40 843,005,00 45,00 8,50 140,00 10,02 81,60 843,005,00 45,00 12,50 205,00 6,82 124,00 843,005,00 45,00 18,50 300,00 4,60 184,00 843,005,00 55,00 3,50 85,00 12,46 54,10 674,005,00 55,00 5,50 130,00 7,94 86,80 674,005,00 55,00 8,50 195,00 5,14 133,00 674,005,00 55,00 12,50 280,00 3,50 194,00 674,005,00 55,00 18,50 410,00 2,36 287,00 674,005,00 68,00 3,50 120,00 6,24 87,70 535,005,00 68,00 5,50 180,00 3,98 135,00 535,005,00 68,00 8,50 275,00 2,57 210,00 535,005,00 68,00 12,50 395,00 1,74 304,00 535,005,00 68,00 18,50 585,00 1,18 455,00 535,006,30 38,30 3,50 50,00 120,40 15,00 1990,006,30 38,30 5,50 75,00 76,50 26,00 1990,006,30 38,30 8,50 110,00 49,60 41,00 1990,006,30 38,30 12,50 155,00 32,70 58,00 1990,006,30 38,30 18,50 225,00 22,80 88,00 1990,006,30 46,30 3,50 60,00 61,60 24,00 1590,006,30 46,30 5,50 90,00 39,20 40,00 1590,006,30 46,30 8,50 135,00 25,30 63,00 1590,006,30 46,30 12,50 195,00 17,30 95,00 1590,006,30 46,30 18,50 280,00 11,60 137,00 1590,006,30 56,30 3,50 80,00 31,50 42,00 1270,006,30 56,30 5,50 115,00 20,00 62,00 1270,006,30 56,30 8,50 175,00 13,00 100,00 1270,006,30 56,30 12,50 250,00 8,90 145,00 1270,006,30 56,30 18,50 365,00 5,90 215,00 1270,00
External N° Free Rate Max. Max.Wire Ø Ø active length C deflection load
d D0 coils Lo N/mm Sn (mm) Fn (N)
CD
164 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
6,30 69,30 3,5 105,00 15,70 65,00 1010,006,30 69,30 5,5 155,00 10,50 99,00 1010,006,30 69,30 8,5 253,00 6,50 155,00 1010,006,30 69,30 12,5 340,00 4,40 227,00 1010,006,30 69,30 18,5 500,00 3,00 339,00 1010,006,30 86,30 3,5 145,00 7,70 103,00 800,006,30 86,30 5,5 220,00 4,90 160,00 800,006,30 86,30 8,5 335,00 3,20 260,00 800,006,30 86,30 12,5 490,00 2,20 370,00 800,006,30 86,30 18,5 720,00 1,50 548,00 800,008,00 48,00 3,5 65,00 159,00 21,00 3030,008,00 48,00 5,5 90,00 102,20 29,00 3030,008,00 48,00 8,5 135,00 66,10 48,00 3030,008,00 48,00 12,5 190,00 44,70 68,00 3030,008,00 48,00 18,5 275,00 30,10 101,00 3030,008,00 58,00 3,5 75,00 81,90 30,00 2425,008,00 58,00 5,5 110,00 52,20 46,00 2425,008,00 58,00 8,5 160,00 33,70 70,00 2425,008,00 58,00 12,5 230,00 22,90 103,00 2425,008,00 58,00 18,5 335,00 15,50 154,00 2425,00
Part numberCD2418CD2419CD2420CD2421CD2422CD2423CD2424CD2425CD2426CD2427CD2428CD2429CD2430CD2431CD2432CD2433CD2434CD2435CD2436CD2437
External N° Free Rate Max. Max.Wire Ø Ø active length C deflection load
d D0 coils Lo N/mm Sn (mm) Fn (N)Price each
1 to 418,51 F
19,00 F
20,75 F
23,65 F
27,01 F
19,00 F
20,75 F
24,69 F
27,01 F
32,88 F
14,66 F
14,66 F
18,51 F
20,18 F
23,65 F
16,13 F
18,51 F
20,18 F
20,75 F
21,24 F
- Material : Piano springs: Stainless steel conforming to DIN17224 CrNiAl 17.7
- Right hand wound- Ends:
Wire ≤ 0.8mm squared, not groundWire > 0.8mm, squared and ground
- Operating temperature : 60°C max- These springs are recommended for
static or medium dynamic loads- Tolerances: All the dimensions and
load values given conform to DIN2095 (Grade 2)
.Info..- These springs have no preset load- Free length Lo will reduce slightly
after first use- For custom made springs, please contact
us (Minimum quantity may apply)
75+ pieces,
contact us
Lo
Fn
Ød
ØD0
Sn
Compression spring DIN 2095Stainless steel piano wireCD
Extension of range
5+-5%
20+-10%
50+-15%
75+On request
1+List
Qty.Disc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1651HPC
Part numberCD2438CD2439CD2440CD2441CD2442CD2443CD2444CD2445CD2446CD2447CD2448CD2449CD2450CD2451CD2452CD2453CD2454CD2455CD2456CD2457CD2458CD2459CD2460CD2461CD2462CD2463CD2464CD2465CD2466CD2467CD2468CD2469CD2470CD2471CD2472CD2473CD2474CD2475CD2476CD2477
Price each1 to 4
20,75 F
22,88 F
25,37 F
29,06 F
56,01 F
22,88 F
25,37 F
29,06 F
36,62 F
79,87 F
24,69 F
27,01 F
30,42 F
113,70 F
120,92 F
19,00 F
21,24 F
24,69 F
27,01 F
30,42 F
24,69 F
25,37 F
32,88 F
62,95 F
93,76 F
27,01 F
30,42 F
62,95 F
79,87 F
113,70 F
27,04 F
36,62 F
73,82 F
93,76 F
120,92 F
32,88 F
62,95 F
93,76 F
113,70 F
120,92 F
8,00 71,00 3,50 95,00 41,00 48,00 1920,008,00 71,00 5,50 140,00 26,00 74,00 1920,008,00 71,00 8,50 205,00 16,80 112,00 1920,008,00 71,00 12,50 300,00 11,40 169,00 1920,008,00 71,00 18,50 435,00 8,00 248,00 1920,008,00 88,00 3,50 125,00 19,90 76,00 1515,008,00 88,00 5,50 180,00 12,70 111,00 1515,008,00 88,00 8,50 285,00 8,30 186,00 1515,008,00 88,00 12,50 410,00 5,60 271,00 1515,008,00 88,00 18,50 600,00 3,80 401,00 1515,008,00 108,00 3,50 170,00 10,20 118,00 1210,008,00 108,00 5,50 260,00 6,50 187,00 1210,008,00 108,00 8,50 390,00 4,20 286,00 1210,008,00 108,00 12,50 570,00 2,80 423,00 1210,008,00 108,00 18,50 835,00 2,00 625,00 1210,00
10,00 60,00 3,50 75,00 200,00 20,00 4470,0010,00 60,00 5,50 110,00 127,00 34,00 4470,0010,00 60,00 8,50 165,00 82,20 56,00 4470,0010,00 60,00 12,50 230,00 55,90 78,00 4470,0010,00 60,00 18,50 335,00 37,80 118,00 4470,0010,00 73,00 3,50 96,00 99,60 39,00 3540,0010,00 73,00 5,50 135,00 63,60 56,00 3540,0010,00 73,00 8,50 200,00 41,10 88,00 3540,0010,00 73,00 12,50 285,00 28,00 120,00 3540,0010,00 73,00 18,50 410,00 18,90 185,00 3540,0010,00 90,00 3,50 115,00 49,00 56,00 2790,0010,00 90,00 5,50 175,00 30,90 92,00 2790,0010,00 90,00 8,50 255,00 20,10 136,00 2790,0010,00 90,00 12,50 370,00 13,70 203,00 2790,0010,00 90,00 18,50 540,00 9,30 302,00 2790,0010,00 110,00 3,50 150,00 24,90 87,00 2230,0010,00 110,00 5,50 230,00 16,30 141,00 2230,0010,00 110,00 8,50 345,00 10,30 217,00 2230,0010,00 110,00 12,50 500,00 7,00 320,00 2230,0010,00 110,00 18,50 730,00 4,70 472,00 2230,0010,00 135,00 3,50 205,00 12,80 138,00 1790,0010,00 135,00 5,50 315,00 8,20 220,00 1790,0010,00 135,00 8,50 475,00 5,20 338,00 1790,0010,00 135,00 12,50 690,00 3,60 497,00 1790,0010,00 135,00 18,50 1015,00 2,40 738,00 1790,00
External N° Free Rate Max. Max.Wire Ø Ø active length C deflection load
d D0 coils Lo N/mm Sn (mm) Fn (N)
CD
166 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
2,403,603,704,504,635,635,807,107,309,009,25
11,2511,6014,1014,5018,0015,0024,0018,5022,5020,0030,0028,2035,20
0,400,400,500,500,630,630,800,801,001,001,251,251,601,602,002,002,202,202,502,502,802,803,203,20
100010001000100010001000100010001000100010001000100010001000100010001000100010001000100010001000
�-��������������-�������
����������������--��-���
D19000D19010D19020D19030D19040D19050D19060D19070D19080D19090D19100D19110D19120D19130D19140D19150D19160D19170D19180D19190D19200D19210D19220D19230
D29000D29010D29020D29030D29040D29050D29060D29070D29080D29090D29100D29110D29120D29130D29140D29150D29160D29170D29180D29190D29200D29210D29220D29230
13,55 F
13,55 F
13,55 F
13,55 F
13,55 F
13,55 F
14,13 F
14,13 F
14,13 F
14,13 F
14,13 F
14,13 F
15,16 F
15,16 F
16,15 F
16,15 F
17,41 F
17,41 F
18,19 F
18,19 F
20,17 F
20,17 F
21,79 F
21,79 F
16,16 F
16,16 F
16,16 F
16,16 F
16,16 F
16,16 F
16,16 F
16,16 F
17,41 F
17,41 F
18,19 F
18,19 F
20,17 F
20,17 F
21,79 F
21,79 F
25,76 F
25,76 F
29,33 F
29,33 F
34,11 F
34,11 F
40,33 F
40,33 F
Part numberSteel Stainless steel
Outside ØD0
Wire Ød
Freelength
L0 Steel Stainless
Price each1 to 5
Steel StainlessStock* Stock*
*Depending on availability
Compression springs in metre lengthsSteel or stainless steelD19
D29
d
L0
D0
- Spring to be cut to desired length- Length each: 1000mm- Materials:
Steel piano wire In accordance with DIN 17223 Class C. No 1,1200Stainless steel in accordance withDIN 17224 No 1,4310(Stainless steel 302 AMS)
steel or
stainless steel
6+-10%
20+-15%
40+-20%
60+-25%
100+On request
1+List
Qty.Disc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1671HPC
d
L0
D0
Extension spring in metre lengthsSteel or stainless steel T39
T49- Spring to be cut to desired length- Length each: 1000mm- Materials:
Steel piano wire conforming to DIN17223 Class C No 1.1200Stainless steel piano wire conformingto DIN 17224 No 1.4310(Stainless steel 302 AMS)
2,403,403,505,504,507,005,509,007,00
11,008,50
13,0011,0017,0014,0022,0015,0024,0018,0028,0020,0030,0022,0036,00
0,400,400,500,500,630,630,800,801,001,001,201,201,601,602,002,002,202,202,502,502,802,803,203,20
100010001000100010001000100010001000100010001000100010001000100010001000100010001000100010001000
�-�����������������-��-�
�����������--�----�-----
T39000T39010T39020T39030T39040T39050T39060T39070T39080T39090T39100T39110T39120T39130T39140T39150T39160T39170T39180T39190T39200T39210T39220T39230
T49000T49010T49020T49030T49040T49050T49060T49070T49080T49090T49100T49110T49120T49130T49140T49150T49160T49170T49180T49190T49200T49210T49220T49230
18,19 F
18,19 F
21,79 F
21,79 F
24,52 F
24,52 F
25,76 F
25,76 F
27,84 F
27,84 F
31,16 F
31,16 F
33,06 F
33,06 F
34,11 F
34,11 F
38,02 F
38,02 F
40,33 F
40,33 F
43,47 F
43,47 F
45,67 F
45,67 F
21,79 F
21,79 F
25,76 F
25,76 F
27,84 F
27,84 F
33,06 F
33,06 F
34,11 F
34,11 F
41,51 F
41,51 F
45,67 F
45,67 F
110,35 F
110,35 F
71,57 F
71,57 F
84,25 F
84,25 F
99,07 F
99,07 F
164,02 F
164,02 F
Part numberSteel Stainless steel
Outside ØD0
Wire Ød
Freelength
L0 Steel Stainless
Price each1 to 5
Steel Stainless
steel or
stainless steel
Stock* Stock*
*Depending on availability
6+-10%
20+-15%
40+-20%
60+-25%
100+On request
1+List
Qty.Disc.
DISCOUNTS
168 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
0,50 2,50 7,90 6,85 1,70 14,000,50 2,50 10,90 4,28 2,70 14,000,50 2,50 15,40 2,74 4,30 14,000,50 3,50 9,50 2,02 4,30 10,000,50 3,50 12,50 1,26 6,90 10,000,50 3,50 17,00 0,81 10,80 10,000,50 3,50 24,50 0,51 17,30 10,000,50 3,50 290,00 0,04 210,00 10,000,50 5,50 12,70 0,44 13,10 7,000,50 5,50 15,70 0,27 20,90 7,000,50 5,50 20,20 0,18 32,70 7,000,50 5,50 27,70 0,11 52,30 7,000,50 5,50 37,70 0,08 78,40 7,00
�--��-�������
Part number
ET4080ET4081ET4082ET4083ET4084ET4085ET4086ET4087ET4088ET4089ET4090ET4091ET4092
Priceeach 1 to 4Stock*
*Depending on availability
7,92 F
7,92 F
7,92 F
7,92 F
7,92 F
7,92 F
7,92 F
7,92 F
7,92 F
8,68 F
7,92 F
7,92 F
7,92 F
External Free Rate Max. Max.Wire Ø Ø length C deflection load
d D0 L0 N/mm (mm) (N)
Extension springs DIN 2097Stainless steel piano wireET
ØD0
Fo
L0 Sn
Fn
- Materials: Stainless piano wire conforming to DIN 17224No 1.4310 BS 2056 EN58A.Annealed commercial stainless steel (302 AMS)
- Ends: German loops closed. End position mayvary
- Tolerances: All sizes and strengths inaccordance with DIN 2097 (Grade 2). Initialtension is given as an indication and is subjectto change.
.Info..- Springs should not be stretched greater than
the maximum deflection value or permanentdamage may result
- Please contact us for custom madesprings for your application. (Minimumorder quantities may apply)
250+ required?
Contact us.
Ød
5+-10%
20+-20%
50+-25%
125+-50%
250+On request
1+List.
Qty.Disc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1691HPC
------������---���������----�-�������---����
Part number
ET4093ET4094ET4095ET4096ET4097ET4098ET4099ET4100ET4101ET4102ET4103ET4104ET4105ET4106ET4107ET4108ET4109ET4110ET4111ET4112ET4113ET4114ET4115ET4116ET4117ET4118ET4119ET4120ET4121ET4122ET4123ET4124ET4125ET4126ET4127ET4128ET4129ET4130ET4131ET4132ET4133ET4134ET4135ET4136
Priceeach 1 to 4Stock*
*Depending on availability
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
16,52 F
External Free Rate Max. Max.Wire Ø Ø length C deflection load
d D0 L0 N/mm (mm) (N)0,55 2,80 8,80 7,03 2,00 16,000,55 2,80 12,10 4,39 3,20 16,000,55 2,80 17,00 2,81 5,00 16,000,55 3,50 9,90 3,12 3,70 13,000,55 3,50 13,20 1,95 5,90 13,000,55 3,50 18,10 1,25 9,20 13,000,55 3,50 26,40 0,77 14,70 13,000,55 6,00 13,90 0,50 14,10 8,000,55 6,00 17,20 0,31 22,50 8,000,55 6,00 22,10 0,20 35,10 8,000,55 6,00 30,40 0,13 56,20 8,000,55 6,00 41,40 0,09 84,30 8,000,63 3,00 9,70 10,39 1,90 22,000,63 3,00 13,50 6,45 3,00 22,000,63 3,00 19,20 4,13 4,60 22,000,63 4,50 12,10 2,38 5,70 15,000,63 4,50 15,90 1,49 9,00 15,000,63 4,50 21,60 0,95 14,11 15,000,63 4,50 31,00 0,60 22,60 15,000,63 7,00 16,10 0,53 16,60 10,000,63 7,00 19,90 0,33 26,60 10,000,63 7,00 25,60 0,21 41,60 10,000,63 7,00 35,00 0,14 66,50 10,000,63 7,00 47,60 0,09 99,70 10,000,70 3,50 11,10 9,53 2,40 26,000,70 3,50 15,30 5,97 3,80 26,000,70 3,50 21,60 3,81 5,90 26,000,70 5,00 13,50 2,64 6,30 19,000,70 5,00 17,70 1,65 10,00 19,000,70 5,00 24,00 1,06 15,60 19,000,70 5,00 34,50 0,66 25,00 19,000,70 7,50 17,50 0,67 16,90 13,000,70 7,50 21,70 0,42 27,00 13,000,70 7,50 28,00 0,27 42,20 13,000,70 7,50 38,50 0,17 67,50 13,000,70 7,50 52,50 0,11 101,00 13,000,80 4,00 12,60 10,91 2,70 34,000,80 4,00 17,40 6,87 4,30 34,000,80 4,00 24,60 4,38 6,70 34,000,80 5,50 15,00 3,44 6,40 26,000,80 5,50 19,80 2,15 10,20 26,000,80 5,50 27,00 1,37 16,00 26,000,80 5,50 39,00 0,86 25,60 26,000,80 5,50 290,00 0,09 225,00 26,00
ET
170 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
0,80 9,00 20,60 0,65 21,40 16,000,80 9,00 25,40 0,40 34,30 16,000,80 9,00 32,60 0,26 53,50 16,000,80 9,00 44,60 0,16 85,60 16,000,80 9,00 60,60 0,11 128,00 16,000,90 4,50 14,20 12,28 3,00 42,000,90 4,50 19,60 7,70 4,70 42,000,90 4,50 27,70 4,92 7,40 42,000,90 6,30 17,10 3,63 7,40 31,000,90 6,30 22,50 2,28 11,90 31,000,90 6,30 30,60 1,46 18,60 31,000,90 6,30 44,10 0,91 29,70 31,000,90 10,00 23,00 0,76 23,10 20,000,90 10,00 28,40 0,47 36,90 20,000,90 10,00 36,50 0,30 57,60 20,000,90 10,00 50,00 0,20 92,20 20,000,90 10,00 68,00 0,13 138,00 20,001,00 5,00 15,80 13,66 3,30 51,001,00 5,00 21,80 8,50 5,20 51,001,00 5,00 30,80 5,47 8,10 51,001,00 7,00 19,00 4,05 8,20 38,001,00 7,00 25,00 2,53 13,10 38,001,00 7,00 34,00 1,57 20,40 38,00
������---��������-�����
Part number
ET4137ET4138ET4139ET4140ET4141ET4142ET4143ET4144ET4145ET4146ET4147ET4148ET4149ET4150ET4151ET4152ET4153ET4154ET4155ET4156ET4157ET4158ET4159
Priceeach 1 to 4Stock*
*Depending on availability
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
9,21 F
External Free Rate Max. Max.Wire Ø Ø length C deflection load
d D0 L0 N/mm (mm) (N)
ØD0
Fo
L0 Sn
Ød
5+-10%
20+-20%
50+-25%
125+-50%
250+On request
1+List.
Qty.Disc.
DISCOUNTS
Extension springs DIN 2097Stainless steel piano wireET
250+ required?
Contact us.
- Materials: Stainless piano wire conforming to DIN 17224 No 1.4310 BS 2056 EN58A.Annealed commercial stainless steel (302 AMS)
- Ends: German loops closed. End position may vary- Tolerances: All sizes and strengths in accordance with DIN 2097 (Grade 2).
Initial tension is given as an indication and is subject to change.
.Info..- Springs should not be stretched greater than the maximum deflection value or
permanent damage may result- Please contact us for custom made springs for your application. (Minimum
order quantities may apply)
Fn
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1711HPC
Part number
ET4160ET4161ET4162ET4163ET4164ET4165ET4166ET4167ET4168ET4169ET4170ET4171ET4172ET4173
Priceeach 1 to 4
6,88 F
8,70 F
6,88 F
6,88 F
6,88 F
6,88 F
6,88 F
6,88 F
6,88 F
6,88 F
6,88 F
6,88 F
6,88 F
6,88 F
External Free Rate Max. Max.Wire Ø Ø length C deflection load
d D0 L0 N/mm (mm) (N)1,00 7,00 49,00 1,01 32,70 38,001,00 7,00 290,00 0,16 220,00 38,001,00 11,00 25,40 0,88 24,80 25,001,00 11,00 31,40 0,55 39,60 25,001,00 11,00 40,40 0,35 61,90 25,001,00 11,00 55,40 0,22 99,00 25,001,00 11,00 75,40 0,15 149,00 25,001,10 5,50 17,40 15,03 3,50 61,001,10 5,50 24,00 9,45 5,70 61,001,10 5,50 33,90 6,01 8,80 61,001,10 7,50 20,60 4,89 8,30 47,001,10 7,50 27,20 3,05 13,30 47,001,10 7,50 37,10 1,96 20,80 47,001,10 7,50 53,60 1,22 33,20 47,00
ØD0
Fo
L0
Fn
- Materials:Piano springs: Stainless steel conforming toDIN17224 CrNiAl 17.7
- Right hand wound- Ends: Closed German loops conforming to DIN
2097. Position of the hooks may vary.- Tolerances: All the dimensions and load values
given conform to DIN2095 (Grade 2)- Initial tension Fo = Max load x 0.08- These springs are recommended for static or
medium dynamic loads
.Info..- Springs should not be stretched greater than
the maximum deflection value orpermanent damage may result
- For custom made springs, please contact us(Minimum quantity may apply)
75+ required?
Contact us.
Ød
Extension springs DIN 2097Stainless steel piano wire ET
Extension of range5+
-5%20+
-10%50+
-15%75+
On request1+
List.Qty.Disc.
DISCOUNTS
172 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
1,10 12,00 27,80 0,99 26,40 30,001,10 12,00 34,40 0,62 42,30 30,001,10 12,00 44,30 0,40 66,10 30,001,10 12,00 60,80 0,24 106,00 30,001,10 12,00 82,80 0,17 159,00 30,001,20 6,00 19,00 16,40 3,80 72,001,20 6,00 26,20 10,31 6,10 72,001,20 6,00 37,00 6,55 9,50 72,001,20 8,50 23,00 4,66 9,90 53,001,20 8,50 30,20 2,91 15,80 53,001,20 8,50 41,00 1,86 24,60 53,001,20 8,50 59,00 1,16 39,60 53,001,20 8,50 290,00 0,21 225,00 53,00
Part number
ET4174ET4175ET4176ET4177ET4178ET4179ET4180ET4181ET4182ET4183ET4184ET4185ET4186
Priceeach 1 to 4
6,88 F
6,88 F
6,88 F
6,88 F
6,88 F
6,88 F
6,88 F
6,88 F
7,56 F
7,56 F
7,56 F
7,56 F
8,49 F
External Free Rate Max. Max.Wire Ø Ø length C deflection load
d D0 L0 N/mm (mm) (N)
ØD0
Fo
L0 Sn
Fn
- Materials:Piano springs: Stainless steel conforming toDIN17224 CrNiAl 17.7
- Right hand wound- Ends: Closed German loops conforming to DIN
2097. Position of the hooks may vary.- Tolerances: All the dimensions and load values
given conform to DIN2095 (Grade 2)- Initial tension Fo = Max load x 0.08- These springs are recommended for static or
medium dynamic loads
.Info..- Springs should not be stretched greater than
the maximum deflection value orpermanent damage may result.
- For custom made springs, please contact us(Minimum quantity may apply)
75+ required?
Contact us.
Ød
Extension springs DIN 2097Stainless steel piano wireET
Extension of range5+
-5%20+
-10%50+
-15%75+
On request1+
List.Qty.Disc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1731HPC
Part number
ET4187ET4188ET4189ET4190ET4191ET4192ET4193ET4194ET4195ET4196ET4197ET4198ET4199ET4200ET4201ET4202ET4203ET4204ET4205ET4206ET4207ET4208ET4209ET4210ET4211ET4212ET4213ET4214ET4215ET4216ET4217ET4218ET4219ET4220ET4221ET4222ET4223ET4224ET4225ET4226ET4227ET4228ET4229
Priceeach 1 to 4
7,56 F
7,56 F
7,56 F
7,56 F
7,56 F
7,56 F
7,56 F
7,56 F
7,56 F
7,56 F
7,56 F
7,56 F
8,70 F
7,56 F
7,56 F
7,56 F
7,56 F
7,99 F
7,56 F
7,56 F
7,56 F
7,56 F
7,56 F
7,56 F
7,56 F
7,56 F
7,56 F
7,56 F
7,56 F
7,99 F
7,56 F
7,56 F
7,56 F
7,56 F
7,56 F
7,56 F
7,56 F
8,32 F
7,56 F
7,56 F
7,75 F
7,99 F
7,99 F
External Free Rate Max. Max.Wire Ø Ø length C deflection load
d D0 L0 N/mm (mm) (N)1,20 13,00 30,20 1,10 27,90 36,001,20 13,00 37,40 0,69 44,70 36,001,20 13,00 48,20 0,44 69,80 36,001,20 13,00 66,20 0,27 112,00 36,001,20 13,00 90,20 0,18 168,00 36,001,40 7,00 22,10 19,15 4,40 95,001,40 7,00 30,50 11,94 7,00 95,001,40 7,00 43,10 7,65 10,90 95,001,40 10,00 26,90 5,27 11,60 70,001,40 10,00 35,30 3,29 18,50 70,001,40 10,00 47,90 2,11 28,90 70,001,40 10,00 68,90 1,32 46,20 70,001,40 10,00 290,00 0,27 220,00 70,001,40 15,00 34,90 1,33 31,20 48,001,40 15,00 43,30 0,83 50,00 48,001,40 15,00 55,90 0,53 78,10 48,001,40 15,00 76,90 0,33 125,00 48,001,40 15,00 105,00 0,22 187,00 48,001,60 8,00 25,30 21,82 4,90 122,001,60 8,00 34,90 13,66 7,80 122,001,60 8,00 49,30 8,76 12,20 122,001,60 11,00 30,10 6,91 11,70 93,001,60 11,00 39,70 4,31 18,70 93,001,60 11,00 54,10 2,77 29,30 93,001,60 11,00 78,10 1,73 46,80 93,001,60 17,00 39,70 1,56 34,30 63,001,60 17,00 49,30 0,98 54,80 63,001,60 17,00 63,70 0,63 85,60 63,001,60 17,00 87,70 0,40 137,00 63,001,60 17,00 120,00 0,26 205,00 63,001,80 9,00 28,40 24,56 5,40 152,001,80 9,00 39,20 15,29 8,60 152,001,80 9,00 55,40 9,88 13,40 152,001,80 12,00 33,20 8,67 11,90 119,001,80 12,00 44,00 5,39 19,00 119,001,80 12,00 60,20 3,45 29,70 119,001,80 12,00 87,20 2,16 47,60 119,001,80 12,00 290,00 0,58 175,00 119,001,80 20,00 46,00 1,53 41,90 73,001,80 20,00 56,80 0,95 67,00 73,001,80 20,00 73,00 0,61 105,00 73,001,80 20,00 100,00 0,38 167,00 73,001,80 20,00 136,00 0,25 251,00 73,00
ET
174 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
2,00 10,00 31,60 27,31 5,90 185,002,00 10,00 43,60 17,09 9,40 185,002,00 10,00 61,60 10,99 14,70 185,002,00 14,00 38,00 8,09 14,70 138,002,00 14,00 50,00 5,05 23,60 138,002,00 14,00 68,00 3,24 36,90 138,002,00 14,00 98,00 2,02 59,00 138,002,00 22,00 50,80 1,74 44,70 90,002,00 22,00 62,80 1,09 71,50 90,002,00 22,00 80,80 0,70 112,00 90,002,00 22,00 111,00 0,44 179,00 90,002,00 22,00 151,00 0,29 268,00 90,00
Part number
ET4230ET4231ET4232ET4233ET4234ET4235ET4236ET4237ET4238ET4239ET4240ET4241
Priceeach 1 to 4
8,32 F
8,32 F
8,32 F
8,32 F
8,32 F
8,32 F
8,32 F
8,49 F
8,49 F
8,49 F
8,49 F
8,70 F
External Free Rate Max. Max.Wire Ø Ø length C deflection load
d D0 L0 N/mm (mm) (N)
ØD0
Fo
L0 Sn
Fn
- Materials:Piano springs: Stainless steel conforming toDIN17224 CrNiAl 17.7
- Right hand wound- Ends: Closed German loops conforming to DIN
2097. Position of the hooks may vary.- Tolerances: All the dimensions and load values
given conform to DIN2095 (Grade 2)- Initial tension Fo = Max load x 0.08- These springs are recommended for static or
medium dynamic loads
.Info..- Springs should not be stretched greater than
the maximum deflection value or permanentdamage may result.
- For custom made springs, please contactus (Minimum quantity may apply)
75+ required?
Contact us.
Ød
Extension springs DIN 2097Stainless steel piano wireET
Extension of range5+
-5%20+
-10%50+
-15%75+
On request1+
List.Qty.Disc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1751HPC
Part number
ET4242ET4243ET4244ET4245ET4246ET4247ET4248ET4249ET4250ET4251ET4252ET4253ET4254ET4255ET4256ET4257ET4258ET4259ET4260ET4261ET4262ET4263ET4264ET4265ET4266ET4267ET4268ET4269ET4270ET4271ET4272ET4273ET4274ET4275ET4276ET4277ET4278ET4279ET4280ET4281ET4282ET4283ET4284
Priceeach 1 to 48,49 F
8,49 F
8,49 F
8,49 F
8,49 F
8,49 F
8,49 F
8,49 F
8,49 F
8,49 F
8,49 F
8,98 F
8,49 F
8,49 F
8,49 F
8,49 F
8,49 F
8,49 F
8,49 F
8,49 F
8,49 F
8,49 F
8,70 F
8,98 F
8,49 F
8,49 F
8,49 F
8,49 F
8,49 F
8,49 F
8,49 F
8,49 F
8,49 F
8,49 F
8,98 F
9,43 F
8,49 F
8,49 F
8,49 F
8,70 F
8,70 F
8,70 F
8,98 F
External Free Rate Max. Max.Wire Ø Ø length C deflection load
d D0 L0 N/mm (mm) (N)2,20 11,00 34,80 30,06 6,30 220,002,20 11,00 48,00 18,81 10,10 220,002,20 11,00 67,80 12,02 15,80 220,002,20 15,00 41,20 9,79 14,80 168,002,20 15,00 54,40 6,10 23,70 168,002,20 15,00 74,20 3,91 37,00 168,002,20 15,00 107,00 2,44 59,20 168,002,20 24,00 55,60 1,98 47,10 108,002,20 24,00 68,80 1,24 75,30 108,002,20 24,00 88,60 0,79 118,00 108,002,20 24,00 122,00 0,50 188,00 108,002,20 24,00 166,00 0,33 282,00 108,002,50 13,00 40,30 29,46 7,80 270,002,50 13,00 55,30 18,47 12,50 270,002,50 13,00 77,80 11,77 19,60 270,002,50 18,00 48,30 9,19 18,90 200,002,50 18,00 63,30 5,73 30,30 200,002,50 18,00 85,80 3,67 47,30 200,002,50 18,00 123,00 2,29 75,70 200,002,50 28,00 64,30 2,05 55,60 133,002,50 28,00 79,30 1,29 88,90 133,002,50 28,00 102,00 0,82 139,00 133,002,50 28,00 139,00 0,52 222,00 133,002,50 28,00 189,00 0,34 333,00 133,002,80 14,00 44,20 38,31 7,70 340,002,80 14,00 61,00 23,96 12,20 340,002,80 14,00 86,20 15,37 19,10 340,002,80 20,00 53,80 10,56 20,30 250,002,80 20,00 70,60 6,60 32,40 250,002,80 20,00 95,80 4,22 50,60 250,002,80 20,00 138,00 2,64 81,00 250,002,80 30,00 69,80 2,67 54,70 170,002,80 30,00 86,60 1,67 87,60 170,002,80 30,00 112,00 1,07 137,00 170,002,80 30,00 154,00 0,67 219,00 170,002,80 30,00 210,00 0,45 328,00 170,003,20 16,00 50,60 43,72 8,50 435,003,20 16,00 69,80 27,31 13,60 435,003,20 16,00 98,60 17,52 21,30 435,003,20 22,00 60,20 13,83 20,50 330,003,20 22,00 79,40 8,59 32,70 330,003,20 22,00 108,00 5,57 51,10 330,003,20 22,00 156,00 3,45 81,80 330,00
ET
176 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
3,20 36,00 82,60 2,59 68,40 205,003,20 36,00 102,00 1,62 109,00 205,003,20 36,00 131,00 1,04 171,00 205,003,20 36,00 179,00 0,65 274,00 205,003,20 36,00 243,00 0,43 410,00 205,003,60 18,00 56,90 49,13 9,40 540,003,60 18,00 78,50 30,75 15,00 540,003,60 18,00 111,00 19,67 23,40 540,003,60 25,00 68,10 15,03 23,00 405,003,60 25,00 89,70 9,36 36,80 405,003,60 25,00 122,00 6,00 57,60 405,003,60 25,00 176,00 3,75 92,10 405,00
Part number
ET4285ET4286ET4287ET4288ET4289ET4290ET4291ET4292ET4293ET4294ET4295ET4296
Priceeach 1 to 4
8,70 F
8,70 F
8,98 F
9,28 F
13,35 F
15,26 F
15,26 F
15,26 F
15,26 F
15,26 F
15,26 F
15,89 F
External Free Rate Max. Max.Wire Ø Ø length C deflection load
d D0 L0 N/mm (mm) (N)
ØD0
Fo
L0 Sn
Fn
- Materials:Piano springs: Stainless steel conforming toDIN17224 CrNiAl 17.7
- Right hand wound- Ends: Closed German loops conforming to DIN
2097. Position of the hooks may vary.- Tolerances: All the dimensions and load values
given conform to DIN2095 (Grade 2)- Initial tension Fo = Max load x 0.08- These springs are recommended for static or
medium dynamic loads
.Info..- Springs should not be stretched greater than
the maximum deflection value orpermanent damage may result.
- For custom made springs, please contact us(Minimum quantity may apply)
75+ required?
Contact us.
Ød
Extension springs DIN 2097Stainless steel piano wireET
Extension of range5+
-5%20+
-10%50+
-15%75+
On request1+
List.Qty.Disc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1771HPC
Part number
ET4297ET4298ET4299ET4300ET4301ET4302ET4303ET4304ET4305ET4306ET4307ET4308ET4309ET4310ET4311ET4312ET4313ET4314ET4315ET4316ET4317ET4318ET4319ET4320ET4321ET4322ET4323ET4324ET4325ET4326ET4327ET4328ET4329ET4330ET4331ET4332ET4333ET4334ET4335ET4336ET4337
Priceeach 1 to 4
15,26 F
15,26 F
15,89 F
15,89 F
16,30 F
15,89 F
15,89 F
15,89 F
15,89 F
15,89 F
16,13 F
16,30 F
16,30 F
16,30 F
17,20 F
20,18 F
24,69 F
16,30 F
17,20 F
17,20 F
17,20 F
17,20 F
17,94 F
18,51 F
17,20 F
17,94 F
18,51 F
20,18 F
21,24 F
17,20 F
17,20 F
16,30 F
17,20 F
16,30 F
16,30 F
20,18 F
17,94 F
18,51 F
20,18 F
21,24 F
22,88 F
External Free Rate Max. Max.Wire Ø Ø length C deflection load
d D0 L0 N/mm (mm) (N)3,60 40,00 92,10 3,04 72,90 260,003,60 40,00 114,00 1,91 117,00 260,003,60 40,00 146,00 1,22 182,00 260,003,60 40,00 200,00 0,76 292,00 260,003,60 40,00 272,00 0,51 437,00 260,004,00 20,00 63,20 54,63 10,10 650,004,00 20,00 87,20 34,10 16,20 650,004,00 20,00 123,00 21,82 25,30 650,004,00 28,00 76,00 16,15 25,40 480,004,00 28,00 100,00 10,13 40,70 480,004,00 28,00 136,00 6,48 63,60 480,004,00 28,00 196,00 4,05 102,00 480,004,00 45,00 103,00 3,25 81,20 310,004,00 45,00 127,00 2,03 130,00 310,004,00 45,00 163,00 1,30 203,00 310,004,00 45,00 223,00 0,81 325,00 310,004,00 45,00 303,00 0,54 487,00 310,004,50 22,00 70,30 66,91 10,40 810,004,50 22,00 97,30 41,83 16,60 810,004,50 22,00 138,00 26,80 25,90 810,004,50 32,00 86,30 17,26 29,00 580,004,50 32,00 113,00 10,82 46,40 580,004,50 32,00 154,00 6,90 72,60 580,004,50 32,00 221,00 4,30 116,00 580,004,50 50,00 115,00 3,80 86,40 380,004,50 50,00 142,00 2,38 138,00 380,004,50 50,00 183,00 1,53 216,00 380,004,50 50,00 250,00 0,95 346,00 380,004,50 50,00 340,00 0,64 518,00 380,005,00 25,00 79,00 68,28 11,90 940,005,00 25,00 109,00 42,69 19,00 940,005,00 25,00 154,00 27,31 29,70 940,005,00 36,00 96,60 18,38 32,20 685,005,00 36,00 127,00 11,42 51,50 685,005,00 36,00 172,00 7,33 80,40 685,005,00 36,00 247,00 4,59 129,00 685,005,00 55,00 127,00 4,37 90,60 460,005,00 55,00 157,00 2,73 145,00 460,005,00 55,00 202,00 1,75 226,00 460,005,00 55,00 277,00 1,10 362,00 460,005,00 55,00 377,00 0,72 544,00 460,00
ET
178 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Torsion springStainless steelTO
TO-R: Right handwound spring
(Standard)
- Material:Stainless steel 302 AMS 5688
- Standard springs are right hand wound
.Options.- For left hand wound springs, replace R in
the part number with L- Custom made springs
.Info..- *A/S = Spring width
TO-L: Left hand woundspring (Option)
E
E90° 180° 270°
E EE E
Do
R
dM/S
A/S
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1791HPC
0,300,300,300,300,300,300,430,430,430,430,430,430,510,510,510,510,510,510,640,640,640,640,640,640,810,810,810,810,810,810,890,890,890,890,890,89
2,362,772,594,224,324,424,064,374,066,326,585,974,854,554,456,156,816,455,975,695,567,728,648,237,326,866,719,308,999,708,007,707,9011,4311,0511,96
5,315,315,315,315,315,31
13,2213,2213,2213,2213,2213,2221,1021,1021,1021,1021,1021,1042,4042,4042,4042,4042,4042,4092,7092,7092,7092,7092,7092,70113,00113,00113,00113,00113,00113,00
4,754,754,756,356,356,356,356,356,359,529,529,529,529,529,52
12,7012,7012,709,529,529,52
12,7012,7012,7012,7012,7012,7012,7012,7012,7015,8815,8815,8815,8815,8815,88
1,401,701,572,772,772,772,362,362,363,963,963,562,772,772,363,564,373,963,563,563,565,165,545,544,343,963,965,545,545,954,754,754,757,147,147,92
9,529,529,52
12,7012,7012,7012,7012,7012,7019,0519,0519,0519,0519,0519,0525,4025,4025,4019,0519,0519,0525,4025,4025,4025,4025,4025,4025,4025,4025,4031,7531,7531,7531,7531,7531,75
1,172,183,531,502,182,812,063,234,882,393,134,322,414,326,223,304,196,352,445,238,033,845,237,323,866,919,705,287,528,943,437,37
11,235,388,33
10,29
90°180°270°180°270°360°
90°180°270°180°270°360°
90°180°270°180°270°360°90°
180°270°180°270°360°
90°180°270°180°270°360°
90°180°270°180°270°360°
��-�����-�����-�--��������-���������
T0120-900-55RT0121-800-67RT0122-700-62RT0121-801-09RT0122-701-09RT0123-601-09RT0170-900-93RT0171-800-93RT0172-700-93RT0171-801-56RT0172-701-56RT0173-601-40RT0200-901-09RT0201-801-09RT0202-700-93RT0201-801-40RT0202-701-72RT0203-601-56RT0250-901-40RT0251-801-40RT0252-701-40RT0251-802-03RT0252-702-18RT0253-602-18RT0320-901-72RT0321-801-56RT0322-701-56RT0321-802-18RT0322-702-18RT0323-602-34RT0350-901-87RT0351-801-87RT0352-701-87RT0351-802-81RT0352-702-81RT0353-603-12R
3,01 F
3,01 F
3,07 F
3,07 F
3,07 F
3,07 F
3,07 F
3,07 F
3,07 F
5,20 F
5,20 F
5,20 F
3,07 F
3,07 F
3,07 F
5,20 F
5,20 F
5,20 F
3,07 F
3,07 F
3,07 F
5,20 F
5,20 F
5,20 F
5,20 F
5,20 F
5,20 F
6,12 F
6,12 F
6,12 F
5,20 F
5,20 F
5,20 F
6,12 F
6,08 F
6,12 F
Part numberWire Ø
d
OutsideØ Do
Torque(N/mm)
T
Loadedposition
R
M/Srecommended
pin ø
LegLength E(mm)
A/SMin. axle
length(mm)*
Fleetangle
Priceeach1 to 5Stock*
*Depending on availability
TO
6+-10%
20+-15%
40+-20%
60+-25%
100+On request
1+List.
Qty.Disc.
DISCOUNTS
180 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
R203104 10,0 5,0 25 10,0 62,5 6,3 75,0 7,5 87,5 8,8 103,0 10,3 2,00 F
R203106 10,0 5,0 38 6,8 64,6 9,5 77,5 11,4 90,4 13,3 106,1 15,6 2,21 F
R203108 10,0 5,0 51 5,0 63,8 12,8 76,5 15,3 89,3 17,9 104,5 20,9 2,36 F
R203112 10,0 5,0 76 3,2 60,8 19,0 73,0 22,8 85,1 26,6 99,8 31,2 2,97 F
R203204 12,5 6,3 25 17,9 111,9 6,3 134,3 7,5 156,6 8,8 184,4 10,3 2,29 F
R203206 12,5 6,3 38 13,6 129,2 9,5 155,0 11,4 180,9 13,3 212,2 15,6 2,71 F
R203208 12,5 6,3 51 11,4 145,4 12,8 174,4 15,3 203,5 17,9 238,3 20,9 3,13 F
R203212 12,5 6,3 76 7,1 134,9 19,0 161,9 22,8 188,9 26,6 221,5 31,2 4,06 F
R203248 12,5 6,3 305 1,4 106,8 76,3 128,1 91,5 149,5 106,8 175,0 125,0 11,76 F
R203304 16,0 8,0 25 23,4 146,8 6,3 175,5 7,5 204,8 8,8 241,0 10,3 2,71 F
R203306 16,0 8,0 38 19,3 183,4 9,5 220,0 11,4 256,7 13,3 301,1 15,6 3,13 F
R203308 16,0 8,0 51 15,7 200,2 12,8 240,2 15,3 280,2 17,9 328,1 20,9 3,56 F
R203312 16,0 8,0 76 10,0 190,0 19,0 228,0 22,8 266,0 26,6 312,0 31,2 4,51 F
R203316 16,0 8,0 102 7,8 198,9 25,5 238,7 30,6 278,5 35,7 326,0 41,8 5,23 F
R203404 20,0 10,0 25 55,8 348,8 6,3 418,5 7,5 488,3 8,8 569,2 10,2 3,97 F
R203406 20,0 10,0 38 33,3 316,4 9,5 379,6 11,4 442,9 13,3 499,5 15,0 3,33 F
Part number
HoleØA
(mm)
RodØB
(mm)
Freelength
Lo(mm)
Load at1 mm
deflection(N)
Load(N)
Deflection(mm)
Load(N)
Deflection(mm)
Load(N)
Deflection(mm)
Load(N)
Deflection(mm)
Priceeach1 to 5
Optimum life(25% freelength Lo)
Long life(30% freelength Lo)
Max. working (35% free length Lo)
Max.deflection
Load deflection
Green: light dutyR
ØA
L0
ØB
Die spring ISO 10243
- ISO green standard (ISO 10243)- Extra-rigid spring- For light loads- Trapezoidal wire- Ends squared and ground- Withstands shocks- Endures jolts- Easy to compress to solid height- Material: chromium-vanadium-coated steel
.Advantages.- The trapezoidal wire permits optimum
deflection whilst protecting against the risk ofdamage caused by overloading the spring.
- Hardness sufficient to allow heavy loads to bewithstood.
- Heat resistance up to 230°C.- Uniform spring performance.- Uniform stiffness ratio- Greater load accuracy for a given height.- Reliable performance.- Reduced risk of breakage.
.Option.- Other sizes
6+-10%
20+-15%
40+-20%
60+-25%
100+On request
1+List
QtyDisc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1811HPC
R203408 20,0 10,0 51 24,5 312,4 12,8 374,9 15,3 437,3 17,9 490,0 20,0 3,86 F
R203412 20,0 10,0 76 16,0 304,0 19,0 364,8 22,8 425,6 26,6 480,0 30,0 4,95 F
R203416 20,0 10,0 102 12,0 306,0 25,5 367,2 30,6 428,4 35,7 492,0 41,0 6,20 F
R203420 20,0 10,0 127 9,5 301,6 31,8 362,0 38,1 422,3 44,5 484,5 51,0 7,36 F
R203424 20,0 10,0 152 7,5 285,0 38,0 342,0 45,6 399,0 53,2 457,5 61,0 7,96 F
R203448 20,0 10,0 305 4,0 305,0 76,3 366,0 91,5 427,0 106,8 488,0 122,0 24,79 F
R203504 25,0 12,5 25 100,0 625,0 6,3 750,0 7,5 875,0 8,8 1020,0 10,2 3,21 F
R203505 25,0 12,5 32 80,3 642,4 8,0 770,9 9,6 899,4 11,2 1003,8 12,5 3,78 F
R203506 25,0 12,5 38 62,0 589,0 9,5 706,8 11,4 824,6 13,3 930,0 15,0 4,33 F
R203507 25,0 12,5 44 52,9 581,9 11,0 698,3 13,2 814,7 15,4 952,2 18,0 4,82 F
R203508 25,0 12,5 51 44,0 561,0 12,8 673,2 15,3 785,4 17,9 880,0 20,0 5,36 F
R203510 25,0 12,5 64 35,2 563,2 16,0 675,8 19,2 788,5 22,4 880,0 25,0 6,07 F
R203512 25,0 12,5 76 28,0 532,0 19,0 638,4 22,8 744,8 26,6 840,0 30,0 6,86 F
R203514 25,0 12,5 89 24,0 534,0 22,3 640,8 26,7 747,6 31,2 840,0 35,0 7,92 F
R203516 25,0 12,5 102 21,1 538,1 25,5 645,7 30,6 753,3 35,7 865,1 41,0 9,07 F
R203518 25,0 12,5 115 18,7 537,6 28,8 645,2 34,5 752,7 40,3 860,2 46,0 9,99 F
R203520 25,0 12,5 127 16,7 530,2 31,8 636,3 38,1 742,3 44,5 851,7 51,0 10,92 F
R203522 25,0 12,5 139 15,3 531,7 34,8 638,0 41,7 744,3 48,7 856,8 56,0 12,41 F
R203524 25,0 12,5 152 14,0 532,0 38,0 638,4 45,6 744,8 53,2 854,0 61,0 12,65 F
R203528 25,0 12,5 178 12,5 556,3 44,5 667,5 53,4 778,8 62,3 887,5 71,0 14,30 F
R203532 25,0 12,5 203 10,4 527,8 50,8 633,4 60,9 738,9 71,1 842,4 81,0 15,99 F
R203548 25,0 12,5 305 7,0 533,8 76,3 640,5 91,5 747,3 106,8 854,0 122,0 33,67 F
R203606 32,0 16,0 38 94,0 893,0 9,5 1071,6 11,4 1250,2 13,3 1410,0 15,0 5,60 F
R203607 32,0 16,0 44 79,5 874,5 11,0 1049,4 13,2 1224,3 15,4 1431,0 18,0 6,07 F
R203608 32,0 16,0 51 67,0 854,3 12,8 1025,1 15,3 1196,0 17,9 1340,0 20,0 6,60 F
R203610 32,0 16,0 64 53,0 848,0 16,0 1017,6 19,2 1187,2 22,4 1325,0 25,0 7,57 F
R203612 32,0 16,0 76 44,0 836,0 19,0 1003,2 22,8 1170,4 26,6 1320,0 30,0 8,54 F
R203616 32,0 16,0 102 32,0 816,0 25,5 979,2 30,6 1142,4 35,7 1312,0 41,0 10,92 F
R203620 32,0 16,0 127 25,0 793,8 31,8 952,5 38,1 1111,3 44,5 1275,0 51,0 14,30 F
R203624 32,0 16,0 152 21,5 817,0 38,0 980,4 45,6 1143,8 53,2 1311,5 61,0 16,66 F
R203632 32,0 16,0 203 15,8 801,9 50,8 962,2 60,9 1122,6 71,1 1279,8 81,0 21,30 F
R203648 32,0 16,0 305 10,3 785,4 76,3 942,5 91,5 1099,5 106,8 1256,6 122,0 35,81 F
R203708 40,0 20,0 51 92,0 1173,0 12,8 1407,6 15,3 1642,2 17,9 1840,0 20,0 8,11 F
R203712 40,0 20,0 76 63,0 1197,0 19,0 1436,4 22,8 1675,8 26,6 1890,0 30,0 11,19 F
R203716 40,0 20,0 102 43,0 1096,5 25,5 1315,8 30,6 1535,1 35,7 1763,0 41,0 15,54 F
R203720 40,0 20,0 127 37,0 1174,8 31,8 1409,7 38,1 1644,7 44,5 1887,0 51,0 19,93 F
R203724 40,0 20,0 152 28,0 1064,0 38,0 1276,8 45,6 1489,6 53,2 1708,0 61,0 22,94 F
R203732 40,0 20,0 203 22,7 1152,0 50,8 1382,4 60,9 1612,8 71,1 1838,7 81,0 28,81 F
R203748 40,0 20,0 305 14,8 1128,5 76,3 1354,2 91,5 1579,9 106,8 1805,6 122,0 44,20 F
R203810 50,0 25,0 64 156,0 2496,0 16,0 2995,2 19,2 3494,4 22,4 3900,0 25,0 15,79 F
R203814 50,0 25,0 89 109,0 2425,3 22,3 2910,3 26,7 3395,4 31,2 3815,0 35,0 20,79 F
R203818 50,0 25,0 115 81,0 2328,8 28,8 2794,5 34,5 3260,3 40,3 3726,0 46,0 26,10 F
R203822 50,0 25,0 139 66,5 2310,9 34,8 2773,1 41,7 3235,2 48,7 3724,0 56,0 30,93 F
R203828 50,0 25,0 178 52,0 2314,0 44,5 2776,8 53,4 3239,6 62,3 3692,0 71,0 36,81 F
R203840 50,0 25,0 254 35,0 2222,5 63,5 2667,0 76,2 3111,5 88,9 3570,0 102,0 53,25 F
R203912 63,0 38,0 76 189,0 3591,0 19,0 4309,2 22,8 5027,4 26,6 5670,0 30,0 35,35 F
R203916 63,0 38,0 102 131,0 3340,5 25,5 4008,6 30,6 4676,7 35,7 5371,0 41,0 49,68 F
R203920 63,0 38,0 127 103,0 3270,3 31,8 3924,3 38,1 4578,4 44,5 5253,0 51,0 55,78 F
R203928 63,0 38,0 178 71,5 3181,8 44,5 3818,1 53,4 4454,5 62,3 5076,5 71,0 70,50 F
R203940 63,0 38,0 254 47,0 2984,5 63,5 3581,4 76,2 4178,3 88,9 4794,0 102,0 103,19 F
Part number
HoleØA
(mm)
RodØB
(mm)
Freelength
Lo(mm)
Load at1 mm
deflection(N)
Load(N)
Deflection(mm)
Load(N)
Deflection(mm)
Load(N)
Deflection(mm)
Load(N)
Deflection(mm)
Priceeach1 to 5
Optimum life(25% freelength Lo)
Long life(30% freelength Lo)
Max. working (35% free length Lo)
Max.deflection
Load deflection
182 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Part number
HoleØA
(mm)
RodØB
(mm)
Freelength
Lo(mm)
Load at1 mm
deflection(N)
Load(N)
Deflection(mm)
Load(N)
Deflection(mm)
Load(N)
Deflection(mm)
Load(N)
Deflection(mm)
Priceeach1 to 5
Optimum life(25% freelength Lo)
Long life(30% freelength Lo)
Max. working (35% free length Lo)
Max.deflection
Load deflection
R204104 10,0 5,0 25 16,0 80,0 5,0 100,0 6,3 120,0 7,5 152,0 9,5 2,07 F
R204106 10,0 5,0 38 11,9 90,4 7,6 113,1 9,5 135,7 11,4 171,4 14,4 2,50 F
R204108 10,0 5,0 51 8,9 90,8 10,2 113,5 12,8 136,2 15,3 172,7 19,4 2,94 F
R204112 10,0 5,0 76 5,3 80,6 15,2 100,7 19,0 120,8 22,8 153,2 28,9 3,54 F
R204204 12,5 6,3 25 30,0 150,0 5,0 187,5 6,3 225,0 7,5 285,0 9,5 2,50 F
R204206 12,5 6,3 38 21,4 162,6 7,6 203,3 9,5 244,0 11,4 308,2 14,4 2,97 F
R204208 12,5 6,3 51 15,5 158,1 10,2 197,6 12,8 237,2 15,3 300,7 19,4 3,33 F
R204212 12,5 6,3 76 10,2 155,0 15,2 193,8 19,0 232,6 22,8 294,8 28,9 4,43 F
R204248 12,5 6,3 305 2,1 128,1 61,0 160,1 76,3 192,2 91,5 243,6 116,0 16,41 F
R204304 16,0 8,0 25 49,4 247,0 5,0 308,8 6,3 370,5 7,5 469,3 9,5 3,13 F
R204306 16,0 8,0 38 33,9 257,6 7,6 322,1 9,5 386,5 11,4 488,2 14,4 3,56 F
R204308 16,0 8,0 51 26,4 269,3 10,2 336,6 12,8 403,9 15,3 512,2 19,4 3,97 F
R204312 16,0 8,0 76 17,8 270,6 15,2 338,2 19,0 405,8 22,8 514,4 28,9 4,95 F
R204316 16,0 8,0 102 13,5 275,4 20,4 344,3 25,5 413,1 30,6 523,8 38,8 5,90 F
R204404 20,0 10,0 25 98,0 490,0 5,0 612,5 6,3 735,0 7,5 921,2 9,4 3,21 F
R204406 20,0 10,0 38 56,0 425,6 7,6 532,0 9,5 638,4 11,4 784,0 14,0 3,89 F
ØA
L0
ØB
Die spring ISO 10243Blue: medium dutyR
- ISO blue standard (ISO 10243)- Extra-rigid spring- For medium loads- Trapezoidal wire- Ends squared and ground- Withstands shocks- Endures jolts- Easy to compress to solid height- Material: chromium-vanadium-coated steel
.Advantages.- The trapezoidal wire permits optimum
deflection whilst protecting against the risk ofdamage caused by overloading the spring.
- Hardness sufficient to allow heavy loads to bewithstood.
- Heat resistance up to 230°C.- Uniform spring performance.- Uniform stiffness ratio- Greater load accuracy for a given height.- Reliable performance.- Reduced risk of breakage.
.Option.- Other sizes
6+-10%
20+-15%
40+-20%
60+-25%
100+On request
1+List
QtyDisc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1831HPC
R204408 20,0 10,0 51 41,7 425,3 10,2 531,7 12,8 638,0 15,3 792,3 19,0 4,51 F
R204412 20,0 10,0 76 25,1 381,5 15,2 476,9 19,0 572,3 22,8 702,8 28,0 5,60 F
R204416 20,0 10,0 102 19,8 403,9 20,4 504,9 25,5 605,9 30,6 752,4 38,0 6,86 F
R204420 20,0 10,0 127 16,6 421,6 25,4 527,1 31,8 632,5 38,1 796,8 48,0 8,43 F
R204424 20,0 10,0 152 13,2 401,3 30,4 501,6 38,0 601,9 45,6 752,4 57,0 9,99 F
R204504 25,0 12,5 25 147,0 735,0 5,0 918,8 6,3 1102,5 7,5 1381,8 9,4 3,54 F
R204506 25,0 12,5 38 93,0 706,8 7,6 883,5 9,5 1060,2 11,4 1302,0 14,0 4,59 F
R204507 25,0 12,5 44 80,8 711,0 8,8 888,8 11,0 1066,6 13,2 1333,2 16,5 5,13 F
R204508 25,0 12,5 51 68,6 699,7 10,2 874,7 12,8 1049,6 15,3 1303,4 19,0 5,67 F
R204510 25,0 12,5 64 53,0 678,4 12,8 848,0 16,0 1017,6 19,2 1272,0 24,0 6,32 F
R204512 25,0 12,5 76 43,2 656,6 15,2 820,8 19,0 985,0 22,8 1209,6 28,0 7,13 F
R204514 25,0 12,5 89 38,2 680,0 17,8 850,0 22,3 1019,9 26,7 1260,6 33,0 8,43 F
R204516 25,0 12,5 102 33,0 673,2 20,4 841,5 25,5 1009,8 30,6 1254,0 38,0 9,47 F
R204518 25,0 12,5 115 28,0 644,0 23,0 805,0 28,8 966,0 34,5 1204,0 43,0 10,67 F
R204520 25,0 12,5 127 25,9 657,9 25,4 822,3 31,8 986,8 38,1 1243,2 48,0 11,58 F
R204522 25,0 12,5 139 23,2 645,0 27,8 806,2 34,8 967,4 41,7 1206,4 52,0 12,47 F
R204524 25,0 12,5 152 20,8 632,3 30,4 790,4 38,0 948,5 45,6 1185,6 57,0 13,27 F
R204528 25,0 12,5 178 17,8 633,7 35,6 792,1 44,5 950,5 53,4 1192,6 67,0 14,95 F
R204532 25,0 12,5 203 15,8 641,5 40,6 801,9 50,8 962,2 60,9 1200,8 76,0 16,66 F
R204548 25,0 12,5 305 10,2 622,2 61,0 777,8 76,3 933,3 91,5 1162,8 114,0 36,81 F
R204606 32,0 16,0 38 185,0 1406,0 7,6 1757,5 9,5 2109,0 11,4 2590,0 14,0 6,20 F
R204607 32,0 16,0 44 158,0 1390,4 8,8 1738,0 11,0 2085,6 13,2 2607,0 16,5 6,86 F
R204608 32,0 16,0 51 134,0 1366,8 10,2 1708,5 12,8 2050,2 15,3 2546,0 19,0 7,49 F
R204610 32,0 16,0 64 99,0 1267,2 12,8 1584,0 16,0 1900,8 19,2 2376,0 24,0 8,43 F
R204612 32,0 16,0 76 80,5 1223,6 15,2 1529,5 19,0 1835,4 22,8 2254,0 28,0 9,39 F
R204616 32,0 16,0 102 58,8 1199,5 20,4 1499,4 25,5 1799,3 30,6 2234,4 38,0 12,01 F
R204620 32,0 16,0 127 44,8 1137,9 25,4 1422,4 31,8 1706,9 38,1 2150,4 48,0 15,99 F
R204624 32,0 16,0 152 37,8 1149,1 30,4 1436,4 38,0 1723,7 45,6 2154,6 57,0 18,29 F
R204632 32,0 16,0 203 28,9 1173,3 40,6 1466,7 50,8 1760,0 60,9 2196,4 76,0 22,94 F
R204648 32,0 16,0 305 18,3 1116,3 61,0 1395,4 76,3 1674,5 91,5 2086,2 114,0 42,05 F
R204708 40,0 20,0 51 181,6 1852,3 10,2 2315,4 12,8 2778,5 15,3 3450,4 19,0 8,82 F
R204712 40,0 20,0 76 108,0 1641,6 15,2 2052,0 19,0 2462,4 22,8 3024,0 28,0 11,76 F
R204716 40,0 20,0 102 81,0 1652,4 20,4 2065,5 25,5 2478,6 30,6 3078,0 38,0 16,66 F
R204720 40,0 20,0 127 62,7 1592,6 25,4 1990,7 31,8 2388,9 38,1 3009,6 48,0 21,30 F
R204724 40,0 20,0 152 51,6 1568,6 30,4 1960,8 38,0 2353,0 45,6 2941,2 57,0 24,19 F
R204732 40,0 20,0 203 36,7 1490,0 40,6 1862,5 50,8 2235,0 60,9 2789,2 76,0 30,07 F
R204748 40,0 20,0 305 24,6 1500,6 61,0 1875,8 76,3 2250,9 91,5 2804,4 114,0 50,54 F
R204810 50,0 25,0 64 209,0 2675,2 12,8 3344,0 16,0 4012,8 19,2 5016,0 24,0 17,25 F
R204814 50,0 25,0 89 140,0 2492,0 17,8 3115,0 22,3 3738,0 26,7 4620,0 33,0 22,73 F
R204818 50,0 25,0 115 106,0 2438,0 23,0 3047,5 28,8 3657,0 34,5 4558,0 43,0 28,68 F
R204822 50,0 25,0 139 87,0 2418,6 27,8 3023,3 34,8 3627,9 41,7 4524,0 52,0 34,31 F
R204828 50,0 25,0 178 69,5 2474,2 35,6 3092,8 44,5 3711,3 53,4 4656,5 67,0 41,45 F
R204836 50,0 25,0 229 50,9 2331,2 45,8 2914,0 57,3 3496,8 68,7 4377,4 86,0 62,35 F
R204848 50,0 25,0 305 38,6 2354,6 61,0 2943,3 76,3 3531,9 91,5 4400,4 114,0 88,46 F
R204912 63,0 38,0 76 312,0 4742,4 15,2 5928,0 19,0 7113,6 22,8 8736,0 28,0 41,68 F
R204916 63,0 38,0 102 221,0 4508,4 20,4 5635,5 25,5 6762,6 30,6 8398,0 38,0 48,57 F
R204920 63,0 38,0 127 168,0 4267,2 25,4 5334,0 31,8 6400,8 38,1 8064,0 48,0 56,83 F
R204928 63,0 38,0 178 114,0 4058,4 35,6 5073,0 44,4 6087,6 53,4 7638,0 67,0 76,83 F
R204936 63,0 38,0 229 89,2 4085,4 45,8 5106,7 57,3 6128,0 68,7 7671,2 86,0 96,83 F
R204948 63,0 38,0 305 64,7 3946,7 61,0 4933,4 76,3 5920,1 91,5 7375,8 114,0 134,71 F
Part number
HoleØA
(mm)
RodØB
(mm)
Freelength
Lo(mm)
Load at1 mm
deflection(N)
Load(N)
Deflection(mm)
Load(N)
Deflection(mm)
Load(N)
Deflection(mm)
Load(N)
Deflection(mm)
Priceeach1 to 5
Optimum life(25% freelength Lo)
Long life(30% freelength Lo)
Max. working (35% free length Lo)
Max.deflection
Load deflection
184 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
R205104 10,0 5,0 25 22,1 82,9 3,8 110,5 5,0 138,1 6,3 165,8 7,5 2,29 F
R205106 10,0 5,0 38 17,1 97,5 5,7 130,0 7,6 162,5 9,5 194,9 11,4 2,71 F
R205108 10,0 5,0 51 12,8 97,9 7,7 130,6 10,2 163,2 12,8 195,8 15,3 3,13 F
R205112 10,0 5,0 76 7,5 85,5 11,4 114,0 15,2 142,5 19,0 171,0 22,8 4,17 F
R205204 12,5 6,3 25 42,1 157,9 3,8 210,5 5,0 263,1 6,3 315,8 7,5 2,97 F
R205206 12,5 6,3 38 29,3 167,0 5,7 222,7 7,6 278,4 9,5 334,0 11,4 3,33 F
R205208 12,5 6,3 51 19,6 149,9 7,7 199,9 10,2 249,9 12,8 299,9 15,3 3,78 F
R205212 12,5 6,3 76 13,2 150,5 11,4 200,6 15,2 250,8 19,0 301,0 22,8 4,82 F
R205248 12,5 6,3 305 2,8 128,1 45,8 170,8 61,0 213,5 76,3 256,2 91,5 23,54 F
R205304 16,0 8,0 25 75,7 283,9 3,8 378,5 5,0 473,1 6,3 567,8 7,5 3,13 F
R205306 16,0 8,0 38 48,5 276,5 5,7 368,6 7,6 460,8 9,5 552,9 11,4 3,97 F
R205308 16,0 8,0 51 37,1 283,8 7,7 378,4 10,2 473,0 12,8 567,6 15,3 4,43 F
R205312 16,0 8,0 76 25,7 293,0 11,4 390,6 15,2 488,3 19,0 586,0 22,8 5,46 F
R205316 16,0 8,0 102 19,3 295,3 15,3 393,7 20,4 492,2 25,5 590,6 30,6 6,54 F
R205404 20,0 10,0 25 216,0 810,0 3,8 1080,0 5,0 1350,0 6,3 1620,0 7,5 3,78 F
R205406 20,0 10,0 38 129,0 735,3 5,7 980,4 7,6 1225,5 9,5 1419,0 11,0 4,62 F
Part number
HoleØA
(mm)
RodØB
(mm)
Freelength
Lo(mm)
Load at1 mm
deflection(N)
Load(N)
Deflection(mm)
Load(N)
Deflection(mm)
Load(N)
Deflection(mm)
Load(N)
Deflection(mm)
Priceeach1 to 5
Optimum life(25% freelength Lo)
Long life(30% freelength Lo)
Max. working (35% free length Lo)
Max.deflection
Load deflection
ØA
L0
ØB
Die spring ISO 10243Red: heavy dutyR
- ISO red standard (ISO 10243)- Extra-rigid spring- For heavy loads- Trapezoidal wire- Ends squared and ground- Withstands shocks- Endures jolts- Easy to compress to solid height- Material: chromium-vanadium-coated steel
.Advantages.- The trapezoidal wire permits optimum deflection
whilst protecting against the risk of damagecaused by overloading the spring.
- Hardness sufficient to allow heavy loads to bewithstood.
- Heat resistance up to 230°C.- Uniform spring performance.- Uniform stiffness ratio- Greater load accuracy for a given height.- Reliable performance.- Reduced risk of breakage.
.Option.- Other sizes
6+-10%
20+-15%
40+-20%
60+-25%
100+On request
1+List
QtyDisc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1851HPC
R205408 20,0 10,0 51 94,0 719,1 7,7 958,8 10,2 1198,5 12,8 1410,0 15,0 5,46 F
R205410 20,0 10,0 64 72,1 692,2 9,6 922,9 12,8 1153,6 16,0 1369,9 19,0 6,07 F
R205412 20,0 10,0 76 59,7 680,6 11,4 907,4 15,2 1134,3 19,0 1373,1 23,0 6,63 F
R205414 20,0 10,0 89 50,5 674,2 13,4 898,9 17,8 1123,6 22,3 1363,5 27,0 7,74 F
R205416 20,0 10,0 102 44,2 676,3 15,3 901,7 20,4 1127,1 25,5 1370,2 31,0 8,62 F
R205418 20,0 10,0 115 38,4 662,4 17,3 883,2 23,0 1104,0 28,8 1344,0 35,0 9,65 F
R205420 20,0 10,0 127 34,1 649,6 19,1 866,1 25,4 1082,7 31,8 1295,8 38,0 10,67 F
R205422 20,0 10,0 139 31,0 646,4 20,9 861,8 27,8 1077,3 34,8 1302,0 42,0 11,58 F
R205424 20,0 10,0 152 28,2 643,0 22,8 857,3 30,4 1071,6 38,0 1297,2 46,0 12,20 F
R205448 20,0 10,0 305 15,0 686,3 45,8 915,0 61,0 1143,8 76,3 1365,0 91,0 32,63 F
R205504 25,0 12,5 25 375,0 1406,3 3,8 1875,0 5,0 2343,8 6,3 2812,5 7,5 4,33 F
R205505 25,0 12,5 32 297,0 1425,6 4,8 1900,8 6,4 2376,0 8,0 2851,2 9,6 5,05 F
R205506 25,0 12,5 38 219,0 1248,3 5,7 1664,4 7,6 2080,5 9,5 2409,0 11,0 5,67 F
R205507 25,0 12,5 44 187,0 1234,2 6,6 1645,6 8,8 2057,0 11,0 2431,0 13,0 6,28 F
R205508 25,0 12,5 51 156,0 1193,4 7,7 1591,2 10,2 1989,0 12,8 2340,0 15,0 6,92 F
R205510 25,0 12,5 64 123,0 1180,8 9,6 1574,4 12,8 1968,0 16,0 2337,0 19,0 7,57 F
R205512 25,0 12,5 76 99,0 1128,6 11,4 1504,8 15,2 1881,0 19,0 2277,0 23,0 8,43 F
R205514 25,0 12,5 89 84,0 1121,4 13,4 1495,2 17,8 1869,0 22,3 2268,0 27,0 9,26 F
R205516 25,0 12,5 102 73,0 1116,9 15,3 1489,2 20,4 1861,5 25,5 2263,0 31,0 10,31 F
R205518 25,0 12,5 115 65,0 1121,3 17,3 1495,0 23,0 1868,8 28,8 2275,0 35,0 11,76 F
R205520 25,0 12,5 127 57,7 1099,2 19,1 1465,6 25,4 1832,0 31,8 2192,6 38,0 13,27 F
R205522 25,0 12,5 139 52,7 1098,8 20,9 1465,1 27,8 1831,3 34,8 2213,4 42,0 14,54 F
R205524 25,0 12,5 152 47,8 1089,8 22,8 1453,1 30,4 1816,4 38,0 2198,8 46,0 15,79 F
R205528 25,0 12,5 178 41,0 1094,7 26,7 1459,6 35,6 1824,5 44,5 2173,0 53,0 18,10 F
R205532 25,0 12,5 203 35,8 1090,1 30,5 1453,5 40,6 1816,9 50,8 2183,8 61,0 20,79 F
R205548 25,0 12,5 305 22,9 1047,7 45,8 1396,9 61,0 1746,1 76,3 2083,9 91,0 39,99 F
R205606 32,0 16,0 38 388,0 2211,6 5,7 2948,8 7,6 3686,0 9,5 4268,0 11,0 7,57 F
R205607 32,0 16,0 44 324,0 2138,4 6,6 2851,2 8,8 3564,0 11,0 4212,0 13,0 8,19 F
R205608 32,0 16,0 51 272,0 2080,8 7,7 2774,4 10,2 3468,0 12,8 4080,0 15,0 8,82 F
R205610 32,0 16,0 64 212,0 2035,2 9,6 2713,6 12,8 3392,0 16,0 4028,0 19,0 10,07 F
R205612 32,0 16,0 76 172,0 1960,8 11,4 2614,4 15,2 3268,0 19,0 3956,0 23,0 11,58 F
R205614 32,0 16,0 89 141,0 1882,4 13,4 2509,8 17,8 3137,3 22,3 3807,0 27,0 13,27 F
R205618 32,0 16,0 115 107,0 1845,8 17,3 2461,0 23,0 3076,3 28,8 3745,0 35,0 17,02 F
R205622 32,0 16,0 139 86,0 1793,1 20,9 2390,8 27,8 2988,5 34,8 3612,0 42,0 20,79 F
R205628 32,0 16,0 178 67,2 1794,2 26,7 2392,3 35,6 2990,4 44,5 3561,6 53,0 25,68 F
R205640 32,0 16,0 254 46,4 1767,8 38,1 2357,1 50,8 2946,4 63,5 3526,4 76,0 32,42 F
R205708 40,0 20,0 51 350,0 2677,5 7,7 3570,0 10,2 4462,5 12,8 5250,0 15,0 10,67 F
R205712 40,0 20,0 76 219,0 2496,6 11,4 3328,8 15,2 4161,0 19,0 5037,0 23,0 14,95 F
R205716 40,0 20,0 102 163,0 2493,9 15,3 3325,2 20,4 4156,5 25,5 5053,0 31,0 20,63 F
R205720 40,0 20,0 127 128,0 2438,4 19,1 3251,2 25,4 4064,0 31,8 4864,0 38,0 26,71 F
R205724 40,0 20,0 152 105,0 2394,0 22,8 3192,0 30,4 3990,0 38,0 4830,0 46,0 30,07 F
R205732 40,0 20,0 203 77,0 2344,7 30,5 3126,2 40,6 3907,8 50,8 4697,0 61,0 36,40 F
R205748 40,0 25,0 305 51,0 2333,3 45,8 3111,0 61,0 3888,8 76,3 4641,0 91,0 58,96 F
R205810 50,0 25,0 64 413,0 3964,8 9,6 5286,4 12,8 6608,0 16,0 7847,0 19,0 21,30 F
R205814 50,0 25,0 89 288,0 3844,8 13,4 5126,4 17,8 6408,0 22,3 7776,0 27,0 27,97 F
R205818 50,0 25,0 115 215,0 3708,8 17,3 4945,0 23,0 6181,3 28,8 7525,0 35,0 35,15 F
R205822 50,0 25,0 139 168,0 3502,8 20,9 4670,4 27,8 5838,0 34,8 7056,0 42,0 43,16 F
R205828 50,0 25,0 178 134,0 3577,8 26,7 4770,4 35,6 5963,0 44,5 7102,0 53,0 50,71 F
R205840 50,0 25,0 254 89,0 3390,9 38,1 4521,2 50,8 5651,5 63,5 6764,0 76,0 75,35 F
R205848 50,0 25,0 305 73,0 3339,8 45,8 4453,0 61,0 5566,3 76,3 6643,0 91,0 98,96 F
Part number
HoleØA
(mm)
RodØB
(mm)
Freelength
Lo(mm)
Load at1 mm
deflection(N)
Load(N)
Deflection(mm)
Load(N)
Deflection(mm)
Load(N)
Deflection(mm)
Load(N)
Deflection(mm)
Priceeach1 to 5
Optimum life(25% freelength Lo)
Long life(30% freelength Lo)
Max. working (35% free length Lo)
Max.deflection
Load deflection
186 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
R206104 10,0 5,0 25,0 36,8 138,0 3,8 156,4 4,3 184,0 5,0 228,2 6,2 2,71 F
R206106 10,0 5,0 38,0 23,7 135,1 5,7 153,1 6,5 180,1 7,6 225,2 9,5 3,33 F
R206108 10,0 5,0 51,0 16,5 126,2 7,7 143,1 8,7 168,3 10,2 214,5 13,0 3,97 F
R206112 10,0 5,0 76,0 10,9 124,3 11,4 140,8 12,9 165,7 15,2 207,1 19,0 4,95 F
R206204 12,5 6,3 25,0 58,5 219,4 3,8 248,6 4,3 292,5 5,0 362,7 6,2 3,33 F
R206206 12,5 6,3 38,0 36,0 205,2 5,7 232,6 6,5 273,6 7,6 342,0 9,5 3,97 F
R206208 12,5 6,3 51,0 26,2 200,4 7,7 227,2 8,7 267,2 10,2 340,6 13,0 4,59 F
R206212 12,5 6,3 76,0 17,1 194,9 11,4 220,9 12,9 259,9 15,2 324,9 19,0 5,67 F
R206248 12,5 6,3 305,0 4,3 196,7 45,8 223,0 51,9 262,3 61,0 326,8 76,0 26,10 F
R206305 16,0 8,0 32,0 89,0 427,2 4,8 484,2 5,4 569,6 6,4 712,0 8,0 4,33 F
R206307 16,0 8,0 44,0 60,9 401,9 6,6 455,5 7,5 535,9 8,8 669,9 11,0 4,95 F
R206310 16,0 8,0 64,0 41,2 395,5 9,6 448,3 10,9 527,4 12,8 659,2 16,0 5,90 F
R206314 16,0 8,0 89,0 29,5 393,8 13,4 446,3 15,1 525,1 17,8 649,0 22,0 6,54 F
R206348 16,0 8,0 305,0 8,4 384,3 45,8 435,5 51,9 512,4 61,0 638,4 76,0 27,33 F
R206404 20,0 10,0 25,0 293,0 1098,8 3,8 1245,3 4,3 1465,0 5,0 1816,6 6,2 4,82 F
R206405 20,0 10,0 32,0 224,0 1075,2 4,8 1218,6 5,4 1433,6 6,4 1792,0 8,0 5,23 F
Part number
HoleØA
(mm)
RodØB
(mm)
Freelength
Lo(mm)
Load at1 mm
deflection(N)
Load(N)
Deflection(mm)
Load(N)
Deflection(mm)
Load(N)
Deflection(mm)
Load(N)
Deflection(mm)
Priceeach1 to 5
Optimum life(25% freelength Lo)
Long life(30% freelength Lo)
Max. working (35% free length Lo)
Max.deflection
Load deflection
ØA
L0
ØB
Die spring ISO 10243Yellow: extra-heavy dutyR
- ISO yellow standard (ISO 10243)- Extra-rigid spring- For extra-heavy loads- Trapezoidal wire- Ends squared and ground- Withstands shocks- Endures jolts- Easy to compress to solid height- Material: chromium-vanadium-coated steel
.Advantages.- The trapezoidal wire permits optimum
deflection whilst protecting against the risk ofdamage caused by overloading the spring.
- Hardness sufficient to allow heavy loads to bewithstood.
- Heat resistance up to 230°C.- Uniform spring performance.- Uniform stiffness ratio- Greater load accuracy for a given height.- Reliable performance.- Reduced risk of breakage.
.Option.- Other sizes
6+-10%
20+-15%
40+-20%
60+-25%
100+On request
1+List
QtyDisc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1871HPC
R206406 20,0 10,0 38,0 177,0 1008,9 5,7 1143,4 6,5 1345,2 7,6 1681,5 9,5 5,67 F
R206407 20,0 10,0 44,0 149,0 983,4 6,6 1114,5 7,5 1311,2 8,8 1639,0 11,0 6,07 F
R206408 20,0 10,0 51,0 128,0 979,2 7,7 1109,8 8,7 1305,6 10,2 1664,0 13,0 6,54 F
R206410 20,0 10,0 64,0 99,0 950,4 9,6 1077,1 10,9 1267,2 12,8 1584,0 16,0 7,16 F
R206412 20,0 10,0 76,0 81,7 931,4 11,4 1055,6 12,9 1241,8 15,2 1552,3 19,0 7,57 F
R206414 20,0 10,0 89,0 69,5 927,8 13,4 1051,5 15,1 1237,1 17,8 1529,0 22,0 8,82 F
R206416 20,0 10,0 102,0 60,6 927,2 15,3 1050,8 17,3 1236,2 20,4 1575,6 26,0 9,65 F
R206418 20,0 10,0 115,0 53,0 914,3 17,3 1036,2 19,6 1219,0 23,0 1537,0 29,0 10,67 F
R206420 20,0 10,0 127,0 47,5 904,9 19,1 1025,5 21,6 1206,5 25,4 1520,0 32,0 11,76 F
R206422 20,0 10,0 139,0 43,0 896,9 20,9 1016,1 23,6 1195,4 27,8 1505,0 35,0 12,83 F
R206424 20,0 10,0 152,0 39,0 889,2 22,8 1007,8 25,8 1185,6 30,4 1482,0 38,0 14,10 F
R206448 20,0 10,0 305,0 21,2 969,9 45,8 1099,2 51,9 1293,2 61,0 1611,2 76,0 38,09 F
R206505 25,0 12,5 32,0 374,4 1797,1 4,8 2036,7 5,4 2396,2 6,4 2995,2 8,0 5,90 F
R206506 25,0 12,5 38,0 346,0 1972,2 5,7 2235,2 6,5 2629,6 7,6 3287,0 9,5 6,54 F
R206507 25,0 12,5 44,0 244,0 1610,4 6,6 1825,1 7,5 2147,2 8,8 2684,0 11,0 7,16 F
R206508 25,0 12,5 51,0 207,5 1587,4 7,7 1799,0 8,7 2116,5 10,2 2697,5 13,0 7,74 F
R206510 25,0 12,5 64,0 161,0 1545,6 9,6 1751,7 10,9 2060,8 12,8 2576,0 16,0 8,62 F
R206512 25,0 12,5 76,0 130,8 1491,1 11,4 1689,9 12,9 1988,2 15,2 2485,2 19,0 9,47 F
R206514 25,0 12,5 89,0 110,5 1475,2 13,4 1671,9 15,1 1966,9 17,8 2431,0 22,0 10,67 F
R206516 25,0 12,5 102,0 96,3 1473,4 15,3 1669,8 17,3 1964,5 20,4 2503,8 26,0 11,76 F
R206518 25,0 12,5 115,0 85,7 1478,3 17,3 1675,4 19,6 1971,1 23,0 2485,3 29,0 13,06 F
R206520 25,0 12,5 127,0 76,3 1453,5 19,1 1647,3 21,6 1938,0 25,4 2441,6 32,0 14,30 F
R206524 25,0 12,5 152,0 63,5 1447,8 22,8 1640,8 25,8 1930,4 30,4 2413,0 38,0 22,22 F
R206528 25,0 12,5 178,0 53,9 1439,1 26,7 1631,0 30,3 1918,8 35,6 2371,6 44,0 18,94 F
R206532 25,0 12,5 203,0 47,0 1431,2 30,5 1622,0 34,5 1908,2 40,6 2397,0 51,0 21,30 F
R206548 25,0 12,5 305,0 30,9 1413,7 45,8 1602,2 51,9 1884,9 61,0 2348,4 76,0 43,16 F
R206606 32,0 16,0 38,0 528,2 3010,7 5,7 3412,2 6,5 4014,3 7,6 5017,9 9,5 8,82 F
R206607 32,0 16,0 44,0 424,4 2801,0 6,6 3174,5 7,5 3734,7 8,8 4668,4 11,0 9,47 F
R206608 32,0 16,0 51,0 353,0 2700,5 7,7 3060,5 8,7 3600,6 10,2 4589,0 13,0 10,31 F
R206610 32,0 16,0 64,0 269,2 2584,3 9,6 2928,9 10,9 3445,8 12,8 4307,2 16,0 11,58 F
R206612 32,0 16,0 76,0 218,5 2490,9 11,4 2823,0 12,9 3321,2 15,2 4151,5 19,0 13,27 F
R206614 32,0 16,0 89,0 180,3 2407,0 13,4 2727,9 15,1 3209,3 17,8 3966,6 22,0 15,16 F
R206616 32,0 16,0 102,0 155,0 2371,5 15,3 2687,7 17,3 3162,0 20,4 4030,0 26,0 16,66 F
R206618 32,0 16,0 115,0 140,0 2415,0 17,3 2737,0 19,6 3220,0 23,0 4060,0 29,0 18,94 F
R206620 32,0 16,0 127,0 124,0 2362,2 19,1 2677,2 21,6 3149,6 25,4 3968,0 32,0 21,04 F
R206624 32,0 16,0 152,0 102,0 2325,6 22,8 2635,7 25,8 3100,8 30,4 3876,0 38,0 25,04 F
R206628 32,0 16,0 178,0 88,2 2354,9 26,7 2668,9 30,3 3139,9 35,6 3880,8 44,0 28,81 F
R206632 32,0 16,0 203,0 76,0 2314,2 30,5 2622,8 34,5 3085,6 40,6 3876,0 51,0 32,63 F
R206640 32,0 16,0 254,0 60,8 2316,5 38,1 2625,3 43,2 3088,6 50,8 3891,2 64,0 36,60 F
R206708 40,0 20,0 51,0 628,0 4804,2 7,7 5444,8 8,7 6405,6 10,2 8164,0 13,0 12,41 F
R206712 40,0 20,0 76,0 379,0 4320,6 11,4 4986,7 12,9 5760,8 15,2 7201,0 19,0 17,45 F
R206716 40,0 20,0 102,0 281,0 4299,3 15,3 4872,5 17,3 5732,4 20,4 7306,0 26,0 23,96 F
R206720 40,0 20,0 127,0 221,0 4210,1 19,1 4771,4 21,6 5613,4 25,4 7072,0 32,0 31,56 F
R206732 40,0 20,0 203,0 132,0 4019,4 30,5 4555,3 34,5 5359,2 40,6 6732,0 51,0 42,05 F
R206748 40,0 20,0 305,0 87,8 4016,9 45,8 4552,4 51,9 5355,8 61,0 6672,8 76,0 69,44 F
R206810 50,0 25,0 64,0 709,0 6806,4 9,6 7713,9 10,9 9075,2 12,8 11344,0 16,0 25,26 F
R206814 50,0 25,0 89,0 475,0 6541,3 13,4 7186,8 15,1 8455,0 17,8 10450,0 22,0 33,67 F
R206818 50,0 25,0 115,0 352,0 6072,0 17,3 6881,6 19,6 8096,0 23,0 10208,0 29,0 42,05 F
R206824 50,0 25,0 152,0 239,0 5449,2 22,8 6175,8 25,8 7265,6 30,4 9082,0 38,0 55,78 F
R206840 50,0 25,0 254,0 153,0 5829,3 38,1 6606,5 43,2 7772,4 50,8 9792,0 64,0 90,57 F
Part number
HoleØA
(mm)
RodØB
(mm)
Freelength
Lo(mm)
Load at1 mm
deflection(N)
Load(N)
Deflection(mm)
Load(N)
Deflection(mm)
Load(N)
Deflection(mm)
Load(N)
Deflection(mm)
Priceeach1 to 5
Optimum life(25% freelength Lo)
Long life(30% freelength Lo)
Max. working (35% free length Lo)
Max.deflection
Load deflection R
188 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
RBS8214/L 8,00 3,20 0,30 0,55 0,36 106 200 � 22,17 F
RBS8215/L 8,00 3,20 0,40 0,60 0,45 185 200 - 22,17 F
RBS8216/L 8,00 4,20 0,30 0,55 0,36 118 200 � 22,17 F
RBS8217/L 8,00 4,20 0,40 0,60 0,45 206 200 - 22,17 F
RBS8227/L 10,00 3,20 0,30 0,65 0,39 100 200 � 25,86 F
RBS8228/L 10,00 3,20 0,40 0,70 0,47 181 200 � 25,86 F
RBS8229/L 10,00 3,20 0,50 0,75 0,56 282 200 - 25,86 F
RBS8230/L 10,00 4,20 0,40 0,50 0,47 191 200 - 25,86 F
RBS8231/L 10,00 4,20 0,50 0,75 0,56 296 200 - 25,86 F
RBS8232/L 10,00 4,20 0,60 0,85 0,66 490 200 - 25,86 F
RBS8233/L 10,00 5,20 0,40 0,70 0,53 209 200 � 25,86 F
RBS8234/L 10,00 5,20 0,50 0,75 0,56 326 200 � 25,86 F
RBS8239/L 12,00 4,20 0,40 0,80 0,50 181 200 � 25,86 F
RBS8240/L 12,00 4,20 0,50 0,85 0,59 288 200 - 25,86 F
RBS8242/L 12,00 5,20 0,50 0,90 0,60 349 200 - 25,86 F
RBS8243/L 12,00 5,20 0,60 0,95 0,69 581 200 � 25,86 F
RBS8244/L 12,50 6,20 0,50 0,85 0,59 331 200 � 25,86 F
RBS8247/L 12,50 6,20 0,70 1,00 0,77 659 200 � 33,26 F
RBS8256/L 14,00 7,20 0,50 0,90 0,60 279 200 � 33,26 F
RBS8257/L 14,00 7,20 0,80 1,10 0,87 796 200 - 33,26 F
Part number
Outsidediameter
Du
Internaldiameter
DiThickness
t
Freelength
Lo
Loadedlength
Ln
Load inLn (N)
FnQty per
packPrice per
pack
*Depending on availability
Stock*
In seriesIn parallel In parallel andin series
SteelRBSDynamic washer DIN 2093
- Lock washer- Belleville (spring) washer conforming to DIN 2093- Sold in packs (see table for quantity per pack)
.Advantages.- Exerts large forces- Usable under severe conditions
.Info..- When compressed, internal Di reduces while outside
diameter Du increases- Dynamic washers can be assembled into columns of
multiple washers in different configurations toobtain the performance required, e.g. a longerstroke than a single washer would give or ahigher force for a shorter stroke.
Lo Ln
Dit
Du
1+List
6+-10%
10+On request
N° batchesDiscount
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1891HPC
RBS
RBS8259/L 15,00 5,20 0,40 0,95 0,54 178 200 � 33,26 F
RBS8260/L 15,00 5,20 0,50 1,00 0,62 279 200 � 33,26 F
RBS8261/L 15,00 5,20 0,60 1,05 0,71 407 200 - 33,26 F
RBS8262/L 15,00 5,20 0,70 1,10 0,80 563 200 - 33,26 F
RBS8263/L 15,00 6,20 0,50 1,00 0,62 292 200 - 33,26 F
RBS8264/L 15,00 6,20 0,60 1,05 0,71 424 200 � 33,26 F
RBS8265/L 15,00 6,20 0,70 1,10 0,80 583 200 � 33,26 F
RBS8266/L 15,00 8,20 0,70 1,10 0,80 666 200 - 33,26 F
RBS8267/L 15,00 8,20 0,80 1,20 0,90 1005 200 � 36,96 F
RBS8272/L 16,00 8,20 0,60 1,05 0,71 410 200 � 33,26 F
RBS8273/L 16,00 8,20 0,90 1,25 0,99 1010 200 � 36,96 F
RBS8275/L 18,00 6,20 0,40 1,00 0,55 141 200 � 33,26 F
RBS8276/L 18,00 6,20 0,50 1,10 0,65 245 200 - 33,26 F
RBS8277/L 18,00 6,20 0,60 1,20 0,75 400 200 - 36,96 F
RBS8278/L 18,00 6,20 0,70 1,25 0,84 561 200 - 36,96 F
RBS8279/L 18,00 6,20 0,80 1,30 0,92 735 200 � 36,96 F
RBS8280/L 18,00 8,20 0,70 1,25 0,84 601 200 � 36,96 F
RBS8281/L 18,00 8,20 1,00 1,30 0,92 781 200 � 40,64 F
RBS8282/L 18,00 9,20 0,70 1,20 0,82 566 200 - 36,96 F
RBS8283/L 18,00 9,20 1,00 1,40 1,10 1255 200 - 40,64 F
RBS8291/L 20,00 8,20 0,60 1,30 0,77 413 200 � 36,96 F
RBS8292/L 20,00 8,20 0,70 1,35 0,86 577 200 � 36,96 F
RBS8293/L 20,00 8,20 0,80 1,40 0,95 760 200 - 40,64 F
RBS8295/L 20,00 10,20 0,80 1,35 0,94 748 200 � 40,64 F
RBS8296/L 20,00 10,20 0,90 1,45 1,04 1064 200 - 40,64 F
RBS8297/L 20,00 10,20 1,00 1,55 1,14 1422 200 � 44,34 F
RBS8298/L 20,00 10,20 1,10 1,55 1,21 1520 200 � 44,34 F
RBS8301/L 22,50 11,20 0,80 1,45 0,96 707 200 - 40,64 F
RBS8302/L 22,50 11,20 1,25 1,75 1,37 1932 200 - 59,12 F
RBS8303/L 23,00 8,20 0,70 1,50 0,90 549 200 - 40,64 F
RBS8304/L 23,00 8,20 0,80 1,55 0,99 730 200 - 40,64 F
RBS8305/L 23,00 8,20 0,90 1,70 1,10 1079 200 � 44,34 F
RBS8309/L 23,00 10,20 0,90 1,65 1,09 1059 200 - 44,34 F
RBS8310/L 23,00 10,20 1,00 1,70 1,17 1314 200 � 51,74 F
RBS8311/L 23,00 12,20 1,25 1,85 1,40 2334 200 - 59,12 F
RBS8313/L 25,00 12,20 0,90 1,60 1,07 862 200 � 48,04 F
RBS8314/L 25,00 12,20 1,50 2,05 1,64 2922 200 � 69,32 F
RBS8321/L 28,00 10,20 0,80 1,75 1,04 672 200 � 51,74 F
RBS8322/L 28,00 10,20 1,00 2,00 1,25 1285 200 - 55,43 F
RBS8324/L 28,00 12,20 1,00 1,95 1,24 1265 200 � 55,43 F
RBS8325/L 28,00 12,20 1,25 2,10 1,46 2079 200 � 70,22 F
RBS8326/L 28,00 12,20 1,50 2,25 1,69 3079 200 - 73,91 F
RBS8327/L 28,00 14,20 1,00 1,80 1,20 1108 200 � 55,43 F
RBS8328/L 28,00 14,20 1,25 2,10 1,46 2236 200 � 70,22 F
RBS8329/L 28,00 14,20 1,50 2,15 1,66 2844 200 - 73,91 F
Part number
Outsidediameter
Du
Internaldiameter
DiThickness
t
Freelength
Lo
Loadedlength
Ln
Load inLn (N)
FnQty per
packPrice per
packStock*
*Depending on availability
1+List
6+-10%
10+On request
N° batchesDiscount
DISCOUNTS
190 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
RBS8334/L 31,50 16,30 1,25 2,15 1,47 1912 100 � 38,79 F
RBS8335/L 31,50 16,30 1,75 2,45 1,92 3874 100 � 44,34 F
RBS8345/L 34,00 14,30 1,25 2,40 1,54 2010 100 - 42,49 F
RBS8346/L 34,00 14,30 1,50 2,55 1,76 2991 100 � 48,04 F
RBS8347/L 34,00 16,30 1,50 2,55 1,76 3187 100 - 48,04 F
RBS8348/L 34,00 16,30 2,00 2,85 2,41 5776 100 - 53,59 F
RBS8352/L 35,50 18,30 1,25 2,25 1,50 1716 100 � 42,49 F
RBS8353/L 35,50 18,30 2,00 2,80 2,20 5256 100 - 57,28 F
RBS8364/L 40,00 16,30 1,50 2,80 1,82 2775 100 - 64,68 F
RBS8365/L 40,00 16,30 2,00 3,10 2,27 5247 100 - 68,37 F
RBS8366/L 40,00 18,30 2,00 3,15 2,29 5688 100 - 68,37 F
RBS8367/L 40,00 20,40 1,50 2,65 1,79 2648 100 � 64,68 F
RBS8368/L 40,00 20,40 2,00 3,10 2,27 5766 100 � 68,37 F
RBS8369/L 40,00 20,40 2,25 3,15 2,47 6551 100 - 75,77 F
RBS8370/L 40,00 20,40 2,50 3,45 2,74 9512 100 - 83,16 F
Part number
Outsidediameter
Du
Internaldiameter
DiThickness
t
Freelength
Lo
Loadedlength
Ln
Load inLn (N)
FnQty per
packPrice per
packStock*
*Depending on availability
RBSBelleville washer DIN 2093
Ln
Dit
Du
In seriesIn parallel In parallel andin series
- Lock washer- Belleville (spring) washer conforming to DIN 2093- Sold in packs (see table for quantity per pack)
.Advantages.- Exerts large forces- Usable under severe conditions
.Info..- When compressed, internal diameter Di reduces while
outside diameter Du increases- Dynamic washers can be assembled into columns of
multiple washers in different configurations to obtainthe performance required, e.g. a longer stroke than asingle washer would give or a higher force for ashorter stroke. Lo
Steel
1+List
6+-10%
10+On request
N° batchesDiscount
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1911HPC
RBS8373/L 45,00 22,40 1,75 3,05 2,07 3677 100 - 88,69 F
RBS8374/L 45,00 22,40 2,50 3,50 2,75 7796 100 - 97,94 F
RBS8376/L 50,00 18,40 1,50 3,30 1,95 2628 100 - 88,69 F
RBS8378/L 50,00 18,40 2,50 3,85 2,90 7355 100 - 123,82 F
RBS8380/L 50,00 20,40 2,00 3,50 2,37 4746 100 - 105,34 F
RBS8381/L 50,00 20,40 2,50 3,85 2,84 7992 100 - 123,82 F
RBS8382/L 50,00 22,40 2,00 3,60 2,40 5256 100 - 105,34 F
RBS8383/L 50,00 22,40 2,50 3,90 2,85 8482 100 - 123,82 F
RBS8384/L 50,00 25,40 2,00 3,40 2,35 4805 100 - 105,34 F
RBS8385/L 50,00 25,40 2,50 3,90 2,85 9169 100 - 123,82 F
RBS8386/L 50,00 25,40 3,00 4,10 3,27 12101 100 - 144,15 F
RBS8393/L 56,00 28,50 2,00 3,60 2,40 4511 50 � 62,83 F
RBS8394/L 56,00 28,50 3,00 4,30 3,32 11523 50 - 86,85 F
RBS8400/L 60,00 25,50 2,50 4,40 3,00 8267 50 - 81,31 F
RBS8401/L 60,00 25,50 3,00 4,65 3,41 11866 50 - 96,09 F
RBS8402/L 60,00 30,50 3,00 4,70 3,40 13386 50 - 96,09 F
RBS8403/L 60,00 30,50 3,50 5,00 3,87 18319 50 � 107,19 F
RBS8404/L 63,00 31,00 2,50 4,25 2,95 7257 50 - 86,85 F
RBS8405/L 63,00 31,00 3,50 4,90 3,85 15200 50 - 115,50 F
RBS8411/L 70,00 25,50 2,00 4,50 2,60 4491 1 - 2,16 F
RBS8412/L 70,00 30,50 2,50 4,90 3,10 8090 1 - 2,31 F
RBS8413/L 70,00 30,50 3,00 5,10 3,50 11474 1 - 2,66 F
RBS8414/L 70,00 35,50 3,00 5,10 3,50 12454 1 - 2,66 F
RBS8415/L 70,00 35,50 4,00 5,80 4,45 24173 1 - 3,84 F
RBS8416/L 70,00 40,50 5,00 6,40 5,35 40600 1 - 4,87 F
RBS8417/L 71,00 36,00 2,50 4,50 3,00 6796 1 - 2,41 F
RBS8418/L 71,00 36,00 4,00 5,60 4,40 20790 1 - 3,91 F
RBS8423/L 80,00 31,00 4,00 6,10 4,50 19613 1 - 4,82 F
RBS8424/L 80,00 36,00 3,00 5,70 3,07 12013 1 - 3,30 F
RBS8425/L 80,00 41,00 3,00 5,30 3,60 10640 1 - 3,30 F
RBS8426/L 80,00 41,00 4,00 6,20 4,55 23104 1 - 4,82 F
RBS8427/L 80,00 41,00 5,00 6,70 5,40 34029 1 - 5,88 F
RBS8428/L 90,00 46,00 3,50 6,00 4,10 14416 1 - 4,57 F
RBS8429/L 90,00 46,00 5,00 7,00 5,50 31774 1 - 7,03 F
RBS8431/L 100,00 41,00 4,00 7,20 4,80 20398 1 - 6,96 F
RBS8432/L 100,00 41,00 5,00 7,75 5,70 32754 1 - 8,70 F
RBS8433/L 100,00 51,00 3,50 6,30 4,20 13219 1 - 5,50 F
RBS8434/L 100,00 51,00 4,00 7,00 4,75 20790 1 - 6,96 F
RBS8435/L 100,00 51,00 5,00 7,80 5,70 36677 1 - 8,70 F
RBS8436/L 100,00 51,00 6,00 8,20 6,55 48543 1 - 11,19 F
Part number
Outsidediameter
Du
Internaldiameter
DiThickness
t
Freelength
Lo
Loadedlength
Ln
Load inLn (N)
FnQty per
packPrice per
packStock*
*Depending on availability
RBS
1+List
6+-10%
10+On request
N° batchesDiscount
DISCOUNTS
192 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Custom-made extension springsHPC technical assistanceFax +33 (0)4 37 490 055
If you would like a quotation for custom made springs, please enlarge this form by 200% (to A4 size), fill in asmuch information as possible and return it by fax to our technical team
Company: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Address: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Account number: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Telephone: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fax: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Material
ød Loop diameter øB
øDo�0° �90°
Free length Lo
Loaded length L1
Load (N)
Quantity
Ød
ØDoØB
Lo
L1
Loop orientation
A minimum orderquantity will apply
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1931HPC
Custom-made compression springsHPC technical
assistanceFax +33 (0)4 37 490 055
If you would like a quotation for custom made springs, please enlarge this form by 200% (to A4 size), fill in asmuch information as possible and return it by fax to our technical team
Company: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Address: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Account N°: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Telephone: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fax: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Material Number of coils
ød Pitch
øDo Housing diameter øE
Free length Lo Axle diameter øF
Loaded length L1 Squarred and ground ends �yes �no
Load (N)
Quantity
Ød
ØDoØF
Lo
L1
ØE
A minimum orderquantity will apply
194 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Custom-made torsion springsHPC technical assistanceFax +33 (0)4 37 490 055
If you would like a quotation for custom made springs, please enlarge this form by 200% (to A4 size), fill in asmuch information as possible and return it by fax to our technical team
Company: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Address: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Account N°: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Telephone: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fax: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Material
ød
øDo
Position �A �B �C �D
Load (N)
Quantity
E
E E EE E
E
E
Do
R
d
M/S
A/S
A - 90° B - 180° C - 270° D - 360°
A minimum orderquantity will apply
Vibrations
Stainless steel elasto mountpage 199
Extension of range
p.199 p.212
p.218 p.220 p.227
Elasto mount Elasto buffer
Adjustable speedcontroller
Rotary damper Shock-absorber
Stainlesssteel
p.196
Double sided anti-vibration pads
Stainless steel
NewNew
Stainlesssteel
196 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Double sided anti-vibration padsPLAKISOL®PKL
- Insulating pads manufactured fromnitrile rubber
- High damping effect- Coefficient of friction: 0.8- Working temperature: -20°/+80°C- Easily installed without need for special
tools, trim using ordinary cutter- Resistant to: Oils, greases, chemical agents
and other hydrocarbons- Profile: PLAKISOL® grooves on both faces (in
opposite directions)- Combinations: Plakisol 22 + 45 pads can be
assembled in multiple layers (max 4) toincrease the deflection under load andinsulation performance (requires a 2mmthick steel plate)
.Advantages.- Slides under the machine- Dampens shocks- Reduces structural noise- Does not stick- Does not require fixing to floor- Good surface grip- Long life- Reduces noise- Trim to required size using an ordinary
cutter
PKL45-45 Nitrile 3 Precision machines/measurement systemsVentilation systems 59,01 F
PKL45-65 Nitrile 6Machine tools
Rotating machinesTextile machines
59,01 F
Part number
Max.load
Material (kg/cm2) ApplicationsPrice each
1 to 4
5+-5%
10+-10%
20+On request
1+List.
Qty.Disc.
DISCOUNTS
450
450
8
for machines
trim using a cutter!
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1971HPC
Holediameter
(mm)
Platethickness
(mm) Ass.1 Ass.2Ass.1
C*Ass.2
C*Ass.2
S*ECF3ECF4ECF5ECF6ECF8
0,4-0,50,4-0,60,6-1,02,3-3,53,0-4,0
1,01,01,53,05,0
2,53,55,07,0
14,0
Part number7,2-7,59,3-9,6
10,2-10,512,7-13,016,5-16,8
Tightening torque (N) Static load (kg)
ThreadECF3ECF4ECF5ECF6ECF8
Part numberM3M4M5M6M8
912151824
7,29,3
10,212,716,5
3,44,45,46,48,4
9,011,514,517,022,0
2,53,03,54,05,0
0,83 F
0,91 F
1,03 F
1,10 F
1,68 F
0,6-2,50,8-3,30,8-4,31,5-5,01,5-6,5
0,3-0,40,4-0,50,5-0,60,7-0,91,6-1,8
57
101428
8,010,513,015,019,5
ØD ØE ØA L k BPrice each
1 to 12�����
Stock*
Elastomer ECFWell nut
Assembly 2
Assembly 1k
ØA
ØD
LB
ØE
- Flanged neoprene elastomer bushingcontaining a machined nut
.Advantages.- Cost effective elimination of vibration and
resonance- Isolation of noise and resonance- Oil, fats, and ozone-resistant- Simple and tool free installation- Assembly in: Compression - shearing
Compression/shearing
.Info..- C*: compression- S*: shearing- Not sold individually,
please contact us for details
13+-10%
29+-15%
41+-20%
60+On request
1+List
Qty.Disc.
DISCOUNTS
*Depending on availability
198 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Part number ØG ØD H L
Price each1 to 5
AT-ZY4-10-10 M4 10 10 10 � 1,65 F
AT-ZY6-20-15 M6 20 15 18 � 3,30 F
AT-ZY6-20-30 M6 20 30 12 � 3,30 F
AT-ZY6-25-20 M6 25 20 12 � 3,52 F
AT-ZY8-30-20 M8 30 20 20 � 4,82 F
AT-ZY8-40-30 M8 40 30 20 � 6,45 F
AT-ZY8-40-48 M8 40 48 23 � 9,68 F
AT-ZY10-40-28 M10 40 28 20 - 7,14 F
AT-ZY10-46-25 M10 46 25 20 - 10,38 F
AT-ZY10-50-30 M10 50 30 33 � 11,86 F
AT-ZY12-75-40 M12 75 40 37 - 17,80 F
AT-ZY16-100-55 M16 100 55 45 - 58,92 F
Stock*
Diabolo-shaped elasto mountAT-ZY
- Radial elasticity greater than axial elasticity- Cylinder worked under compression or shearing- Materials:
core: Steel platescylinder: Rubber
- Hardness: NK 55-60 shore A
.Uses.- Dampens sound and vibrations
1+List
6+-10%
20+-15%
40+-20%
100+-25%
200+On request
Qty.Disc.
DISCOUNTS
Male / male mounting
ØD
ØG
H
L
High flexibility
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 1991HPC
ØD
ØG
H
L
Price eachPart number ØG ØD H L 1 to 5AT-ZY4-10-10/SS M4 10 10 10AT-ZY6-20-15/SS M6 20 15 18AT-ZY6-20-30/SS M6 20 30 12AT-ZY6-25-20/SS M6 25 20 12AT-ZY8-30-20/SS M8 30 20 20AT-ZY8-40-30/SS M8 40 30 20AT-ZY8-40-48/SS M8 40 48 23AT-ZY10-40-28/SS M10 40 28 20AT-ZY10-46-25/SS M10 46 25 20AT-ZY10-50-30/SS M10 50 30 33
3,20 F
4,80 F
5,34 F
5,34 F
8,18 F
14,42 F
14,96 F
14,42 F
17,09 F
17,09 F
Male / male mounting AT-ZYSS
Diabolo shaped stainless steel elasto mount
- Radial elasticity greater than axial elasticity- Cylinder works under both compression and
shear- Materials :
Core : Stainless steel (A2)Cylinder : Rubber
- Hardness NK55-60 Shore A
.Uses.- Dampens sound and vibrations
High flexibility
40+-20%
6+-10%
100+On request
1+Prix
Qty.Disc.
DISCOUNTS20+
-15%
stainless steel
200 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Part number ØG ØD H LPrice each
1 to 5CT-ZY4-10-10 M4 10 10 4 � 1,65 F
CT-ZY8-30-20 M8 30 20 8 � 4,82 F
CT-ZY8-40-48 M8 40 48 8 � 9,68 F
CT-ZY10-50-30 M10 50 30 10 - 16,95 F
*Depending on availability
Stock*
Diabolo-shaped elasto mount
High flexibility
Female / female mountingCT-ZY
- Radial elasticity greater than axialelasticity
- Cylinder worked under compression or shearing- Materials:
core: Steel platescylinder: Rubber
- Hardness: NK 55-60 shore A
.Uses.- Dampens sound and vibrations.
ØD
ØG
H
L
1+List.
6+-10%
20+-15%
40+-20%
100+-25%
200+On request
Qty.Disc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2011HPC
Price eachPart number ØG ØD H L 1 to 5
CT-ZY4-10-10/SS M4 10 10 4 3,19 F
CT-ZY8-30-20/SS M8 30 20 8 7,21 F
CT-ZY8-40-48/SS M8 40 48 8 14,91 F
CT-ZY10-50-30/SS M10 50 30 10 23,44 F
Diabolo shaped stainless steel elasto mount
High flexibility
Female / female mounting CT-ZYSS
- Radial elasticity greater than axial elasticity- Cylinder works under both compression and shear- Materials :
Core: Stainless steel (A2)Cylinder: Rubber
- Hardness NK55-60 Shore A
.Uses.- Dampens sound and vibrations.
ØD
ØG
H
L
1+List
6+-10%
20+-15%
40+-20%
100+On request
Qty.Disc.
DISCOUNTS
stainless steel
202 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Elasto mountMale / male mountingA-ZY
ØD
H
ØG
T T
- Radial elasticity greater than axialelasticity
- Cylinder worked under compression orshearing
- Materialscore: Steel platescylinder: Rubber
- Hardness: NK 55-60 shore A
.Uses.- Dampens sound and vibrations
.Options.- Stainless steel version available on
request
.Info..- Not sold individually, please contact
us for details- Values for loads and rigidity are given
as a guide only
Compression CompressionShearing
Shearing
From size M3
upwards
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2031HPC
A-ZY
Part number ØG ØD H Tstiffness(N/mm)
Max.load (N)
stiffness(N/mm)
Max.load (N)
Price each1 to 5
A-ZY3-8-8 M3 8 8 6 - - - - � 1,78 F
A-ZY4-10-10 M4 10 10 10 044 43 09 15 � 1,65 F
A-ZY4-15-7 M4 15 7 10 174 95 29 35 � 1,50 F
A-ZY4-15-8 M4 15 8 10 160 95 27 35 � 1,50 F
A-ZY4-15-10 M4 15 10 10 124 95 24 35 � 1,65 F
A-ZY4-15-15 M4 15 15 12 061 95 13 35 � 1,75 F
A-ZY4-15-20 M4 15 20 13 - - - - � 1,96 F
A-ZY5-15-15 M5 15 15 8 61 95 24 35 � 1,75 F
A-ZY6-20-8 M6 20 8 18 0307 170 036 60 � 1,96 F
A-ZY6-20-10 M6 20 10 18 - - - - � 2,04 F
A-ZY6-20-15 M6 20 15 18 0130 170 024 60 � 2,04 F
A-ZY6-20-20 M6 20 20 18 - - - - � 2,04 F
A-ZY6-20-25 M6 20 25 18 0085 170 017 60 � 2,19 F
A-ZY6-25-10 M6 25 10 18 0750 280 074 95 � 2,19 F
A-ZY6-25-15 M6 25 15 18 - - - - � 2,35 F
A-ZY6-25-20 M6 25 20 18 - - - - � 2,67 F
A-ZY6-25-25 M6 25 25 18 - - - - � 2,81 F
A-ZY8-30-15 M8 30 15 20 0525 400 058 140 � 3,19 F
A-ZY8-30-20 M8 30 20 20 0204 400 040 140 � 3,36 F
A-ZY8-30-25 M8 30 25 20 - - - - � 3,73 F
A-ZY8-30-30 M8 30 30 20 0108 400 025 140 � 3,74 F
A-ZY8-30-40 M8 30 40 20 - - - - - 4,52 F
A-ZY8-40-25 M8 40 25 23 - - - - � 4,59 F
A-ZY8-40-30 M8 40 30 23 0213 650 043 250 � 4,75 F
A-ZY10-40-25 M10 40 25 28 - - - - - 4,59 F
A-ZY10-40-30 M10 40 30 28 - - - - � 5,59 F
A-ZY10-50-20 M10 50 20 28 0857 1000 110 400 � 6,61 F
A-ZY10-50-30 M10 50 30 28 0375 1000 066 400 � 7,53 F
A-ZY10-50-40 M10 50 40 28 0260 1000 053 400 � 7,69 F
A-ZY10-50-45 M10 50 45 28 0215 1000 043 400 - 7,86 F
A-ZY10-50-50 M10 50 50 28 - - - - � 8,36 F
A-ZY10-60-40 M10 60 40 28 - - - - - 11,32 F
A-ZY10-70-45 M10 70 45 28 - - - - � 16,96 F
A-ZY12-60-40 M12 60 40 33 - - - - � 12,81 F
A-ZY12-75-25 M12 75 25 37 2710 2300 211 850 � 15,10 F
A-ZY12-75-40 M12 75 40 37 0734 2300 117 850 � 16,64 F
A-ZY12-75-50 M12 75 50 37 0506 2300 091 850 � 19,42 F
A-ZY12-75-55 M12 75 55 37 0417 2300 078 850 � 20,21 F
A-ZY16-100-40 M16 100 40 41 1970 4200 257 1600 - 30,32 F
A-ZY16-100-55 M16 100 55 41 0892 4200 145 1600 - 33,72 F
A-ZY16-100-75 M16 100 75 41 - - - - - 45,56 F
*Depending on availability
Stock*Compression Shearing
1+List
6+-10%
20+-15%
40+-20%
100+-25%
200+On request
Qty.Disc.
DISCOUNTS
204 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Stainless steel Elasto mountMale / male mountingA-ZYSS
ØD
H
ØG
T T
- Radial elasticity greater thanaxial elasticity.
- Cylinder worked undercompression or shearing
- Materials:Core: Steel platesCylinder: Rubber
- Hardness: NK 55-60 shore A
.Uses.- Dampens sound and vibrations
.Info..- Not sold individually, please
contact us for details- Values for loads and rigidity are
given as a guide only
stainless steel
Compression CompressionShearing
Shearing
From size M3
upwards
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2051HPC
40+-20%
6+-10%
100+On request
1+List
Qty.Disc.
DISCOUNTS20+
-15%
A-ZY3-8-8/SSA-ZY4-10-10/SSA-ZY4-15-7/SSA-ZY4-15-8/SSA-ZY4-15-10/SSA-ZY4-15-15/SSA-ZY4-15-20/SSA-ZY5-15-15/SSA-ZY6-20-8/SSA-ZY6-20-10/SSA-ZY6-20-15/SSA-ZY6-20-20/SSA-ZY6-20-25/SSA-ZY6-25-10/SSA-ZY6-25-15/SSA-ZY6-25-20/SSA-ZY6-25-25/SSA-ZY8-30-15/SSA-ZY8-30-20/SSA-ZY8-30-25/SSA-ZY8-30-30/SSA-ZY8-30-40/SSA-ZY8-40-25/SSA-ZY8-40-30/SSA-ZY10-40-25/SSA-ZY10-40-30/SSA-ZY10-50-20/SSA-ZY10-50-30/SSA-ZY10-50-40/SSA-ZY10-50-45/SSA-ZY10-50-50/SSA-ZY10-60-40/SSA-ZY10-70-45/SSA-ZY12-60-40/SSA-ZY12-75-25/SSA-ZY12-75-40/SSA-ZY12-75-50/SSA-ZY12-75-55/SSA-ZY16-100-40/SSA-ZY16-100-55/SSA-ZY16-100-75/SS
M3M4M4M4M4M4M4M5M6M6M6M6M6M6M6M6M6M8M8M8M8M8M8M8
M10M10M10M10M10M10M10M10M10M12M12M12M12M12M16M16M16
810151515151515202020202025252525303030303040404040505050505060706075757575
100100100
810
78
10152015
81015202510152025152025304025302530203040455040454025405055405575
6101010101213
8181818181818181818202020202023232828282828282828283337373737414141
-44
174160124
61-
61307
-130
-85
750---
525204
-108
--
213--
857375260215
----
2710734506417
1970892
-
-4395959595
-95
170-
170-
170280
---
400400
-400
--
650--
1000100010001000
----
230023002300230042004200
-
-9
29272413
-2436
-24
-1774
---
5840
-25
--
43--
110665343
----
2111179178
257145
-
-1535353535
-3560
-60
-6095
---
140140
-140
--
250--
400400400400
----
850850850850
16001600
-
2,73 F
2,73 F
2,26 F
2,44 F
2,53 F
2,53 F
2,89 F
2,46 F
2,79 F
2,87 F
2,91 F
3,36 F
3,36 F
3,08 F
3,29 F
3,81 F
4,21 F
5,00 F
5,16 F
5,58 F
5,58 F
6,86 F
7,47 F
6,74 F
6,41 F
7,68 F
9,21 F
11,12 F
13,57 F
11,22 F
14,72 F
17,09 F
23,50 F
17,76 F
21,37 F
23,50 F
26,71 F
28,31 F
50,14 F
55,07 F
63,28 F
Part number ØG ØD H Tstiffness(N/mm)
Max.load (N)
stiffness(N/mm)
Max.load (N)
Price each1 to 5
Compression ShearingStock*
��-�-------�---��������----��------------
*Depending on availability
A-ZYSS
206 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Cylindrical elasto mountMale / female mountingB-ZY
ØD ØG ØG
T H
- Radial elasticity greater than axialelasticity
- Cylinder worked under compressionor shearing
- Materialscore: Steel platescylinder: Rubber
- Hardness: NK 55-60 shore A
.Uses.- Dampens sound and vibrations
.Options.- Stainless steel version available on
request
.Info..- Not sold individually, please contact
us for details- Values for loads and rigidity are given
as a guide only
From size M3
upwards
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2071HPC
B-ZY
Part number ØG ØD H Tstiffness(N/mm)
Max.load (N)
stiffness(N/mm)
Max.load (N)
Priceeach1 to 5
B-ZY3-8-8 M3 8 8 6 - - - - � 3,56 F
B-ZY4-10-10 M4 10 10 10 48 43 10 35 � 1,84 F
B-ZY4-10-15 M4 10 15 10 29 43 05 15 � 1,95 F
B-ZY4-15-15 M4 15 15 10 67 95 15 35 � 1,84 F
B-ZY4-15-20 M4 15 20 10 - - - - � 1,93 F
B-ZY4-15-30 M4 15 30 15 - - - - � 2,05 F
B-ZY5-15-15 M5 15 15 8 067 095 15 35 � 1,93 F
B-ZY6-20-15 M6 20 15 18 130 170 24 60 � 2,13 F
B-ZY6-20-20 M6 20 20 18 - - - - � 2,12 F
B-ZY6-20-25 M6 20 25 18 061 170 11 060 � 2,22 F
B-ZY6-25-15 M6 25 15 18 - - - - - 2,42 F
B-ZY6-25-20 M6 25 20 18 130 280 30 095 � 2,73 F
B-ZY6-25-25 M6 25 25 18 - - - - � 2,81 F
B-ZY6-25-30 M6 25 30 18 071 280 19 095 � 3,04 F
B-ZY8-30-15 M8 30 15 20 525 400 58 140 � 3,33 F
B-ZY8-30-20 M8 30 20 20 235 400 42 140 � 3,52 F
B-ZY8-30-25 M8 30 25 20 - - - - � 3,83 F
B-ZY8-30-30 M8 30 30 20 113 400 28 140 � 4,11 F
B-ZY8-30-40 M8 30 40 20 106 400 13 140 - 4,60 F
B-ZY8-40-25 M8 40 25 23 - - - - � 4,62 F
B-ZY8-40-30 M8 40 30 23 234 650 49 250 � 5,20 F
B-ZY8-40-40 M8 40 40 23 147 650 23 250 � 5,99 F
B-ZY10-40-30 M10 40 30 28 - - - - � 5,60 F
B-ZY10-50-20 M10 50 20 28 857 1000 110 400 � 6,78 F
B-ZY10-50-25 M10 50 25 28 - - - - - 7,88 F
B-ZY10-50-30 M10 50 30 28 395 1000 073 400 � 7,50 F
B-ZY10-50-40 M10 50 40 28 273 1000 058 400 � 7,67 F
B-ZY10-50-45 M10 50 45 28 - - - - - 7,86 F
B-ZY10-50-50 M10 50 50 28 210 1000 037 400 � 8,38 F
B-ZY10-60-40 M10 60 40 28 - - - - - 11,31 F
B-ZY10-70-45 M10 70 45 28 - - - - - 16,95 F
B-ZY12-60-40 M12 60 40 33 - - - - - 12,77 F
B-ZY12-75-25 M12 75 25 37 - - - - � 15,10 F
B-ZY12-75-40 M12 75 40 37 0735 2300 0118 0850 � 15,48 F
B-ZY12-75-50 M12 75 50 37 0530 2300 0101 0850 - 19,58 F
B-ZY12-75-55 M12 75 55 37 0417 2300 078 0850 - 20,41 F
B-ZY16-100-40 M16 100 40 41 2160 4200 283 1600 - 30,71 F
B-ZY16-100-55 M16 100 55 41 0892 4200 0145 1600 - 34,88 F
B-ZY16-100-60 M16 100 60 41 0843 4200 0142 1600 - 36,65 F
B-ZY16-100-75 M16 100 75 41 - - - - - 46,07 F
Stock*
*Depending on availability
Compression Shearing
1+List
6+-10%
20+-15%
40+-20%
100+-25%
200+On request
Qty.Disc.
DISCOUNTS
208 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Stainless steel elasto mountMale / female fixing
Compression CompressionShearing
Shearing
B-ZYSS
ØD ØG ØG
T H
- Radial elasticity greater than axialelasticity
- Cylinder worked under compressionand shearing
- Materials:core: stainless steel A2 platescylinder: rubber
- Hardness: NK 55-60 shore A
.Uses.- Noise and vibration dampening
.Info..- Not sold individually, please contact
us for details- Values for loads and rigidity are given
as a guide only
stainless steel
From size M3
upwards
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2091HPC
B-ZYSS
*Depending on availability
40+-20%
6+-10%
100+On request
1+List
Qty.Disc.
DISCOUNTS20+
-15%
B-ZY3-8-8/SSB-ZY4-10-10/SSB-ZY4-10-15/SSB-ZY4-15-15/SSB-ZY4-15-20/SSB-ZY4-15-30/SSB-ZY5-15-15/SSB-ZY6-20-15/SSB-ZY6-20-20/SSB-ZY6-20-25/SSB-ZY6-25-15/SSB-ZY6-25-20/SSB-ZY6-25-25/SSB-ZY6-25-30/SSB-ZY8-30-15/SSB-ZY8-30-20/SSB-ZY8-30-25/SSB-ZY8-30-30/SSB-ZY8-30-40/SSB-ZY8-40-25/SSB-ZY8-40-30/SSB-ZY8-40-40/SSB-ZY10-40-30/SSB-ZY10-50-20/SSB-ZY10-50-25/SSB-ZY10-50-30/SSB-ZY10-50-40/SSB-ZY10-50-45/SSB-ZY10-50-50/SSB-ZY10-60-40/SSB-ZY10-70-45/SSB-ZY12-60-40/SSB-ZY12-75-25/SSB-ZY12-75-40/SSB-ZY12-75-50/SSB-ZY12-75-55/SSB-ZY16-100-40/SSB-ZY16-100-55/SSB-ZY16-100-60/SSB-ZY16-100-75/SS
M3M4M4M4M4M4M5M6M6M6M6M6M6M6M8M8M8M8M8M8M8M8
M10M10M10M10M10M10M10M10M10M12M12M12M12M12M16M16M16M16
81010151515152020202525252530303030304040404050505050505060706075757575
100100100100
8101515203015152025152025301520253040253040302025304045504045402540505540556075
61010101015
8181818181818182020202020232323282828282828282828333737373741414141
-482967
--
67130
-61
-130
-71
525235
-113106
-234147
-857
-395273
-210
----
735530417
2160892843
-
-434395
--
95170
-170
-280
-280400400
-400400
-650650
-1000
-10001000
-1000
----
230023002300420042004200
-
-10
515
--
1524
-11
-30
-195842
-2813
-4923
-110
-7358
-37
----
118101
78283145142
-
-351535
--
3560
-60
-95
-95
140140
-140140
-250250
-400
-400400
-400
----
850850850
160016001600
-
5,29 F
2,78 F
3,06 F
2,73 F
2,89 F
3,00 F
3,00 F
3,20 F
3,29 F
3,29 F
3,53 F
4,10 F
4,84 F
4,27 F
5,23 F
5,00 F
5,83 F
5,91 F
6,41 F
6,94 F
7,27 F
8,55 F
8,01 F
11,13 F
11,34 F
11,12 F
12,24 F
12,08 F
13,60 F
16,03 F
23,50 F
17,75 F
21,37 F
23,50 F
27,78 F
28,31 F
50,14 F
55,06 F
56,71 F
65,76 F
Part numberPrice each
1 to 5
Compression ShearingStock*
---��---�--��-�--�-------�--�-----------
ØG ØD H Tstiffness(N/mm)
Max.load (N)
stiffness(N/mm)
Max.load (N)
210 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Elasto bufferMale mountingD-ZY
- Large degree of deformationaccepted thus absorbing largeamounts of energy
- Energy absorbed gradually- Progressive absorption of energy- Materials
core: Steel platescylinder: Rubber
- Hardness: NK 55-60 shore A
.Uses.- Shock-absorbing stop
.Options.- Stainless steel version available on
request
.Info..- Not sold individually, please
contact us for details- Values for loads and rigidity are
given as a guide onlyØD ØG
T H
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2111HPC
Part number ØG ØD H Tstiffness(N/mm)
Max. load(N)
Priceeach1 to 5
D-ZY4-10-10 M4 10 10 10 038 043 � 1,03 F
D-ZY4-15-8 M4 15 8 10 122 095 � 1,12 F
D-ZY4-15-10 M4 15 10 10 106 095 � 1,28 F
D-ZY4-15-15 M4 15 15 10 074 095 � 1,42 F
D-ZY6-20-15 M6 20 15 18 138 170 � 1,58 F
D-ZY6-20-20 M6 20 20 18 - - � 1,75 F
D-ZY6-20-25 M6 20 25 18 - - � 1,75 F
D-ZY6-25-10 M6 25 10 18 - - � 1,65 F
D-ZY6-25-15 M6 25 15 18 254 280 � 1,82 F
D-ZY6-25-20 M6 25 20 18 128 280 � 2,04 F
D-ZY6-25-25 M6 25 25 18 - - � 2,19 F
D-ZY6-25-30 M6 25 30 18 080 280 � 2,44 F
D-ZY8-30-20 M8 30 20 20 200 400 � 2,73 F
D-ZY8-30-25 M8 30 25 20 - - � 3,04 F
D-ZY8-30-30 M8 30 30 20 120 400 � 3,43 F
D-ZY8-30-40 M8 30 40 20 - - � 3,97 F
D-ZY8-40-20 M8 40 20 23 - - � 3,73 F
D-ZY8-40-30 M8 40 30 23 23 234 � 4,21 F
D-ZY8-40-40 M8 40 40 23 - - � 4,43 F
D-ZY10-40-30 M10 40 30 28 - - � 4,21 F
D-ZY10-50-20 M10 50 20 28 680 1000 � 5,65 F
D-ZY10-50-30 M10 50 30 28 425 1000 � 5,81 F
D-ZY10-50-40 M10 50 40 28 - - � 6,37 F
D-ZY10-50-45 M10 50 45 28 - - - 6,75 F
D-ZY10-50-50 M10 50 50 28 - - � 7,53 F
D-ZY10-60-40 M10 60 40 28 - - � 11,08 F
D-ZY10-70-45 M10 70 45 28 - - - 14,34 F
D-ZY12-60-40 M12 60 40 33 - - � 11,08 F
D-ZY12-75-25 M12 75 25 37 2000 2300 � 10,54 F
D-ZY12-75-40 M12 75 40 37 810 2300 - 15,88 F
D-ZY12-75-50 M12 75 50 37 - - - 16,55 F
D-ZY12-75-55 M12 75 55 37 - - � 17,50 F
D-ZY16-100-50 M16 100 50 41 1578 4200 � 29,25 F
D-ZY16-100-55 M16 100 55 41 860 4200 - 30,71 F
Compression
D-ZY
Stock*
*Depending on availability
1+List
6+-10%
20+-15%
40+-20%
100+-25%
200+On request
QtyDisc.
DISCOUNTS
212 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Stainless steel cylindrical stopMale mountingD-ZYSS
- Very high deformation allows high levels of energy to beabsorbed.
- Progressive deformation- Materials:
Core: Stainless steel plates (A2)Head: Rubber
- Hardness: NK 55-60 Shore A
.Uses.- Shock absorbing stop
.Info..- Not sold individually, please contact us for details- Load and stiffness figures are given as a guide only
ØD ØG
T H
stainless steel
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2131HPC
Part numberStiffness Max
ØG ØD H T (N/mm) load (N)
Priceeach 1 to 5
D-ZY4-10-10/SS M4 10 10 10 038 043D-ZY4-15-8/SS M4 15 8 10 122 095D-ZY4-15-10/SS M4 15 10 10 106 095D-ZY4-15-15/SS M4 15 15 10 074 095D-ZY6-20-15/SS M6 20 15 18 138 170D-ZY6-20-20/SS M6 20 20 18 - -D-ZY6-20-25/SS M6 20 25 18 - -D-ZY6-25-10/SS M6 25 10 18 - -D-ZY6-25-15/SS M6 25 15 18 254 280D-ZY6-25-20/SS M6 25 20 18 128 280D-ZY6-25-25/SS M6 25 25 18 - -D-ZY6-25-30/SS M6 25 30 18 080 280D-ZY8-30-20/SS M8 30 20 20 200 400D-ZY8-30-25/SS M8 30 25 20 - -D-ZY8-30-30/SS M8 30 30 20 120 400D-ZY8-30-40/SS M8 30 40 20 - -D-ZY8-40-20/SS M8 40 20 23 - -D-ZY8-40-30/SS M8 40 30 23 23 234D-ZY8-40-40/SS M8 40 40 23 - -D-ZY10-40-30/SS M10 40 30 28 - -D-ZY10-50-20/SS M10 50 20 28 680 1000D-ZY10-50-30/SS M10 50 30 28 425 1000D-ZY10-50-40/SS M10 50 40 28 - -D-ZY10-50-45/SS M10 50 45 28 - -D-ZY10-50-50/SS M10 50 50 28 - -D-ZY10-60-40/SS M10 60 40 28 - -D-ZY10-70-45/SS M10 70 45 28 - -D-ZY12-60-40/SS M12 60 40 33 - -D-ZY12-75-25/SS M12 75 25 37 2000 2300D-ZY12-75-40/SS M12 75 40 37 810 2300D-ZY12-75-50/SS M12 75 50 37 - -D-ZY12-75-55/SS M12 75 55 37 - -D-ZY16-100-25/SS M16 100 25 41 - -D-ZY16-100-50/SS M16 100 50 41 1578 4200D-ZY16-100-55/SS M16 100 55 41 860 4200
1,51 F
2,67 F
1,84 F
2,01 F
2,63 F
2,71 F
2,54 F
2,34 F
2,59 F
2,87 F
3,16 F
3,41 F
3,86 F
4,26 F
4,80 F
5,67 F
5,25 F
5,87 F
6,20 F
5,91 F
7,97 F
8,14 F
8,91 F
9,53 F
10,48 F
15,41 F
19,89 F
15,41 F
14,63 F
21,98 F
22,97 F
24,04 F
35,30 F
46,84 F
48,49 F
Compression
D-ZYSS
*Depending on availability
1+List
6+-10%
20+-15%
40+-20%
100+On request
Qty.Disc.
DISCOUNTS
214 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Part number ØG ØD Hstiffness(N/mm)
Max. load(N)
Price each1 to 5
E-ZY4-10-10 M4 10 10 038 043 1,03 F
E-ZY4-10-15 M4 10 15 - - 1,28 F
E-ZY4-15-15 M4 15 15 074 095 1,34 F
E-ZY6-20-15 M6 20 15 138 170 1,75 F
E-ZY6-20-20 M6 20 20 - - 1,82 F
E-ZY6-25-10 M6 25 10 - - 1,96 F
E-ZY6-25-20 M6 25 20 128 280 2,50 F
E-ZY6-25-30 M6 25 30 080 280 2,50 F
E-ZY8-30-15 M8 30 15 - - 2,42 F
E-ZY8-30-17 M8 30 17 - - 2,50 F
E-ZY8-30-20 M8 30 20 200 0400 2,81 F
E-ZY8-30-30 M8 30 30 120 0400 3,43 F
E-ZY8-40-30 M8 40 30 023 0234 4,21 F
E-ZY10-50-20 M10 50 20 680 1000 5,33 F
E-ZY10-50-30 M10 50 30 425 1000 5,81 F
E-ZY10-50-40 M10 50 40 - - 6,38 F
E-ZY10-50-50 M10 50 50 - - 7,46 F
E-ZY12-75-25 M12 75 25 2000 2300 11,31 F
E-ZY12-75-55 M12 75 55 - - 16,81 F
CompressionStock*
�����������������-�
Female mounting
ØD
H
ØG
E-ZYCylindrical stop
- Large degree of deformation acceptedthus absorbing large amounts ofenergy
- Energy absorbed gradually- Material:
Core: Steel platesCylinder: Rubber
- Hardness NK 55-60 shore A
.Uses.- Shock absorbing stop
.Info..- Not sold individually, please contact
us for details- Values for loads and rigidity are given
as a guide only
1+List
6+-10%
20+-15%
40+-20%
100+-25%
200+On request
Qty.Disc.
DISCOUNTS
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2151HPC
Part numberStiffness Max
ØG ØD H (N/mm) load (N)Price each
1 to 5
E-ZY4-10-10/SS M4 10 10 038 043 2,26 F
E-ZY4-10-15/SS M4 10 15 - - 1,76 F
E-ZY4-15-15/SS M4 15 15 074 095 1,93 F
E-ZY6-20-15/SS M6 20 15 138 170 2,54 F
E-ZY6-20-20/SS M6 20 20 - - 2,67 F
E-ZY6-25-10/SS M6 25 10 - - 2,79 F
E-ZY6-25-20/SS M6 25 20 128 280 3,00 F
E-ZY6-25-30/SS M6 25 30 080 280 3,53 F
E-ZY8-30-15/SS M8 30 15 - - 3,53 F
E-ZY8-30-17/SS M8 30 17 - - 3,53 F
E-ZY8-30-20/SS M8 30 20 200 0400 3,94 F
E-ZY8-30-30/SS M8 30 30 120 0400 4,80 F
E-ZY8-40-30/SS M8 40 30 023 0234 5,87 F
E-ZY10-50-20/SS M10 50 20 680 1000 7,48 F
E-ZY10-50-30/SS M10 50 30 425 1000 8,14 F
E-ZY10-50-40/SS M10 50 40 - - 8,87 F
E-ZY10-50-50/SS M10 50 50 - - 10,48 F
E-ZY12-75-25/SS M12 75 25 2000 2300 16,03 F
E-ZY12-75-55/SS M12 75 55 - - 23,50 F
Compression
Female mounting
ØD
H
ØG
E-ZYSS
Stainless steel cylindrical stop
- Very high deformation allowing high levels of energy tobe absorbed.
- Progressive deformation- Materials:
Core: Stainless steel plates (A2)Head: Rubber
- Hardness: NK 55-60 Shore A
.Uses.- Shock absorbing stop
.Info..- Not sold individually, please contact us for details- Load and stiffness figures are given as a guide only
1+List
6+-10%
20+-15%
40+-20%
100+On request
Qty.Disc.
DISCOUNTS
stainless steel
216 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Part number ØG T ØD HPrice each
1 to 5
D-PAR6-20-24 M6 18 20 24 � 2,35 F
D-PAR8-30-36 M8 20 30 36 � 3,04 F
D-PAR8-35-40 M8 20 35 40 � 4,51 F
D-PAR8-50-67 M8 36 50 67 � 9,30 F
D-PAR10-50-58 M10 28 50 58 � 8,22 F
D-PAR12-75-89 M12 37 75 89 � 20,50 F
D-PAR16-115-136 M16 43 115 136 - 78,54 F
D-KON6-25-17 M6 18 25 17 � 2,19 F
D-KON10-50-18 M10 28 50 18 � 6,18 F
D-KON12-80-30 M12 35 80 30 � 26,40 F
D-KON16-125-45 M16 45 125 45 - 44,06 F
Stock*
*Depending on availability
Conical elasto bufferMale mountingD-PAR
D-KON- Large degree of deformation
accepted thus absorbing largeamounts of energy
- Energy absorbed gradually- Materials
core: Steel platescylinder: Rubber
- Hardness: NK 55-60 shore A
.Uses.- Shock-absorbing stop
.Options.- Stainless steel version available
on request
Type D-KON
Type D-PAR
ØGØD
T
H
ØD
H
ØG
T
1+List
6+-10%
20+-15%
40+-20%
100+-25%
200+On request
Qty.Disc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2171HPC
1+List
6+-10%
20+-15%
40+-20%
100+On request
Qty.Disc.
DISCOUNTS
Références ØG T ØD HPrice each
1 to 5D-PAR6-20-24/SSD-PAR8-30-36/SSD-PAR8-35-40/SSD-PAR8-50-67/SSD-PAR10-50-58/SSD-KON6-25-17/SSD-KON10-50-18/SSD-KON12-80-30/SSD-KON16-125-45/SS
M6 18 20 24M8 20 30 36M8 20 35 40M8 36 50 67
M10 28 50 58M6 18 25 17
M10 28 50 18M12 35 80 30M16 45 125 45
�����----
3,36 F
5,16 F
13,97 F
14,34 F
11,12 F
3,20 F
8,01 F
42,73 F
92,88 F
Stock*
*Depending on availability
Stainless steel elasto mountMale mounting D-PARSS
D-KONSS
T
Type D-KONSS
Type D-PARSS
ØG
ØD
H
ØD
H
ØG
T
- Very high deformation allowing highlevels of energy to be absorbed.
- Progressive deformation- Materials :
Core : Stainless steel plates (A2)Head : Rubber
- Hardness : NK 55-60 Shore A
.Uses.- Shock-absorbing stop
stainless steel
stainless steel
218 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Adjustable speed controllerOperating principlesDVC
This range of hydraulic speedcontrols are maintenance-free,self-contained sealed units forprecise control of speed in bothmovement directions. The speed ofmovement can be adjustedindependently for each directionof travel. Typical applications arethe control of movement indrilling, milling, cutting andsharpening machines. A wide variety of mountingaccessories makes the DVC easy touse in many different types ofapplication.
Piston rod
Rod sealAdjustment knob forextension speed
Guide bearing
Accumulator
Piston
Pressure chamber
Body
Adjustment knob forcompression speed
Mounting threadfor accessories
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2191HPC
Adjustable speed controllerCompression and
Extension Forces 42 N to 2000NDVC
- Allows the speed of an actuator to becontrolled in both directions.
- Working temperature range: 0° to 65°C- Material :
Rod: Hard chrome plated steelBody: Black powder coated aluminiumOperating fluid: Automatic TransmissionFluid (ATF) viscosity 42 cSt. at 40 °C
.Installation.- Install mechanical stops at 1-1.5mm from the
end of the stroke.- End fittings should be secured to prevent any
risk of them unscrewing.
.Info..- If the unit has not been
operated for some time, thebreakaway force on the initialcycle may be greater thannormal.
6+-10%
10+On request
1+List
Qty.Disc.
DISCOUNTS
DVC32-50-AA-PDVC32-100-AA-PDVC32-150-AA-P
DVC32-50-AA-MDVC32-100-AA-MDVC32-150-AA-M
DVC32-50-AA-NDVC32-100-AA-NDVC32-150-AA-N
50 240 42 2000 42 2000100 340 42 2000 42 1670150 440 42 2000 42 1335
50 240 42 2000 42 2000100 340 42 2000 42 1670150 440 42 2000 42 1335
50 240 42 2000 42 2000100 340 42 2000 42 1670150 440 42 2000 42 1335
450,37 F
485,22 F
511,18 F
406,58 F
441,45 F
467,36 F
406,58 F
441,45 F
467,36 F
Part number
Force (N)Stroke L Extensions Compression
Min Max Min MaxPrice each
1 to 5Damping in both directions
Damping on out stroke only (control knob on open body side)
Damping on in stroke only (control knob on open rod side)
Ø8 Ø
32
Ø1410
2220Stroke
L +/- 2mm extended
Operating range - Compression
Pro
pelli
ng f
orce
(N
)
Pro
pelli
ng f
orce
(N
)
Initial speed mm/sec Initial speed mm/sec
Operating range- Extension
220 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Part numberFRTG2200G1FRTG2300G1FRTG2450G1FRTG2600G1FRTG2101G1
1414141414
0,50,50,50,50,5
77777
0,20±0,07
0,30±0,08
0,45±0,10
0,60±0,12
1,00±0,20
�-�-�
No of teeth ModulePCD(mm)
Dampingtorque (Ncm)
Priceeach1 to 58,32 F8,32 F8,32 F8,32 F8,32 F
Stock*
*Depending on availability
Damping torque from 0.2 to 1.0 NcmFRTGBi-directional rotary damper
- Supplied with a spur gear- Working temperature from 0°C to +50°C- Max. speed 50 rpm- Damping torque varies depending on the
speed of rotation and the temperature: see table below
- Data given based on life of 50,000 cycles- Materials:
Casing: polycarbonateGear: polyacetalFluid: silicone
152,5±0,05
2,1
2,1
Ø3,6-0,02
19±0,05
2,6
3,7
Ø8
2,26,6
2,5
24
7
101
450300200
2,0
1,5
1,0
0,5
0
Modèle
50 (t/min)403020100
FRTG2 (à 23°C)
Co
up
le d
’am
ort
isse
men
t (N
cm)
600
Modèle
50 (°C)403020100
FRTG2 (à 20 t/min)
Co
up
le d
’am
ort
isse
men
t (N
cm)
600450300200
1,41,21,00,80,60,40,2
0
101
1+List
6+-15%
20+-20%
40+On request
Qty.Disc.
DISCOUNTS
FRTG2 (at 23°C) FRTG2 (at 20 rpm)Model Model
Dam
pin
g t
orq
ue
(Ncm
)
Dam
pin
g t
orq
ue
(Ncm
)
(rpm)
2.0
1.5
1.0
0.5
0
1.41.21.00.80.60.40.2
0
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2211HPC
Part numberBIDIRECTIONALFRTC2201G1FRTC2301G1UNIDIRECTIONAL (CLOCKWISE)FRNC2R201G1UNIDIRECTIONAL (ANTICLOCKWISE)FRNC2L201G1
1111
11
11
0,80,8
0,8
0,8
8,88,8
8,8
8,8
2±0,6
3±0,8
2±0,6
2±0,6
-�
�
�
No of teeth ModulePCD(mm)
Dampingtorque (Ncm)
Priceeach
1 to 5
19,26 F19,26 F
22,88 F
22,88 F
Stock*
*Depending on availability
Damping torque from 2 to 3 Ncm FRTCFRNC
Rotary damper
- Supplied with a spur gear- Working temperature from 0°C to +50°C- Max. speed 50 rpm- Damping torque varies depending on the
speed of rotation and the temperature:see table below
- Data given based on life of 50,000 cycles- Materials:
Casing: polycarbonateGear: polyacetalFluid: silicone
153,5±0,02
3,2
Ø4-0,05
21
4,5
Ø10,4
1,5 7
27,5
301
201
543210
Modèle
50 (t/min)403020100
FRTC2 (à 23°C)
Cou
ple
d’am
ortis
sem
ent (
Ncm
)
Modèle
50 (°C)403020100
FRTC2 (à 20 t/min)
Co
up
le d
’am
ort
isse
men
t (N
cm)
301
201
3,53,02,52,01,51,00,5
0
1+List
6+-15%
20+-20%
40+On request
Qty.Disc.
DISCOUNTS
FRTC2 (at 23°C)Model Model
FRTC2 (at 20 rpm)
Dam
pin
g t
orq
ue
(Ncm
)
Dam
pin
g t
orq
ue
(Ncm
)
(rpm)
3.53.02.52.01.51.00.5
0
14
222 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Part numberBI-DIRECTIONALFRTD2501G1FRTD2102G1FRTD2152G1UNIDIRECTIONAL (CLOCK WISE)FRND2R501G1FRND2R102G1FRND2R152G1UNIDIRECTIONAL (ANTICLOCKWISE)FRND2L501G1FRND2L102G1FRND2L152G1
121212
121212
121212
111
111
111
121212
121212
121212
5±1
10±2
15±3
5±1
10±2
15±3
5±1
10±2
15±3
--�
--�
--�
No of teeth ModulePCD(mm)
Dampingtorque (Ncm)
Priceeach1 to 5
65,42 F65,42 F65,42 F
74,66 F74,66 F74,66 F
74,66 F74,66 F74,66 F
Stock*
*Depending on availability
Damping torque from 5 to 15 NcmFRTDFRND
Rotary damper
- Supplied with a spur gear- Working temperature from 0°C to +50°C- Max. speed 50 rpm- Damping torque varies depending on the speed of
rotation and the temperature: see table below- Data given based on life of 50,000 cycles- Materials:
Casing: polycarbonateGear: polyacetalFluid: silicone
152102
501
2520151050
Modèle
50 (t/min)403020100
FRTD2 (à 23°C)
Co
up
le d
’am
ort
isse
men
t (N
cm
Modèle
50 (°C)403020100
FRTD2 (à 20 t/min)
Co
up
le d
’am
ort
isse
men
t (N
cm)
152
102501
20
15
10
5
0
25
4±0,02
4,2R5
Ø5-0,05
40
5
Ø14,75
1,5 11
50
19
1+List
6+-15%
20+-20%
40+On request
Qty.Disc.
DISCOUNTS
FRTD2 (at 23°C)Model Model
FRTD2 (at 20 rpm)
Dam
pin
g t
orq
ue
(Ncm
)
Dam
pin
g t
orq
ue
(Ncm
)
(rpm)
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2231HPC
Technical informationRotary damper
.Mountings to avoid.Rotary dampers are only intended for use in controlling rotary or lateral movements.They should not be used for any of the applications shown below.
Pulleyrotarydamper
Weight
Speed control Damper for tension roll Rigging screw damper
rotarydamper
motor
Stepper motor
solenoid
Solenoid damping Vibration damping
Lever damping Suspended load damper Pendulum damper
Side load Axial load Angular misalignment
.Typical applications.
224 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Shock absorberFormulae and examples of calculation
A shock absorber decelerates linearly. Roughly 90% of shock absorber applications can be modelled if thefollowing 4 factors are known: 1. Mass to slow down m (kg) 2. Impact velocity vD (m/s)3. Propelling force F (N) 4. Shocks per hour C (hr)
Symbols used in the formulae:W1 Kinetic energy (Nm) M Propelling torque (Nm)W2 Propelling energy (Nm) I Moment of inertia (kgm2)W3 Total energy per cycle (W1+W2) (Nm) g Gravity = 9,81 (m/s2)W4 Total energy per hour (W3 C) (Nm/hr) h Drop height exc. shock abs. stroke (m)me Effective weight (kgme) s Shock absorber stroke (m)m Mass to slow down (kg) Q Reactive force (N)*v Velocity or moving mass (m/s) μ Friction coefficient*vD Impact velocity of shock absorber (m/s) t Braking time (sec)ω Angular velocity (rad/s) a Deceleration (m/sec2)F Propelling force (N) α Side load angle (°)C Number of Shocks per hour (/hr) β Angle of inclination (°)P Motor power (kW) L Radius of mass (m)ST Setting coefficient (normally 2.5) 1 to 2.5 R Dist. pivot/installation pt. of damp. (m)
r Dist. pivot/force application pt. (m)*v or vD is the impact velocity of the mass. In the case of an acceleratedmovement (for example when the mass isdeplaced by a pneumatic cylinder), the impact velocity can be 1.5 to 2 times greater than the average velocity.1. Mass without propelling forceFormulae:W1 = m . v2 . 0,5 W2 = 0W3 = W1 + W2
W4 = W3 . C
vD = v me= m
2. Mass with propelling forceFormulae:W1 = m . v2 . 0,5 W2 = F . s W3 = W1 + W2
W4 = W3 . C
vD = v me =
2.1 Mass moving upwardsW2 = ( F - m . g ). s
2.2 Mass moving downwardsW2 = ( F + m . g ). s
3. Mass pulled by a motorFormulae:W1 = m . v2 . 0,5 W2 =
W3 = W1 + W2
W4 = W3 . C
vD = v
me =
4. Mass on motorised rollersFormulae:W1 = m . v2 . 0,5 W2 = m . μ . g . sW3 = W1 + W2
W4 = W3 . C
vD = v me =
5. Swinging mass with propelling forceFormulae:W1 = m . v2 . 0,5
W2 =
W3 = W1 + W2
W4 = W3 . C
vD = = ω . R
me =
1000 . P . ST. sv
2 . W3
vD2
2 . W3
vD2
2 . W3
vD2
M . sR
v . RL
2 . W3
vD2
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2251HPC
6. Free falling massFormulae:W1 = m . g . h W2 = m . g . sW3 = W1 + W2
W4 = W3 . C
vD =√2 . g . h
me =
6.1 Mass rolling or sliding on an inclined planeFormulae:W1 = m . g . h = m . vD
2 . 0,5W2 = m . g . sinβ . sW3 = W1 + W2
W4 = W3 . C
vD =√2 . g . h
me =
6.1a Mass with upwards propelling forceW2 = ( F - m . g . sinb ). s
6.1b Mass with downwards propelling forceW3 = ( F + m . g . sinb ). s
6.2 Mass free falling abut a pivot point
Formulae: Follow calculations
for example 6.1. Verify
the radial load.
tan α = sR
7. Rotary index table with propelling torqueFormulae:W1 = m . v2 . 0,25
W2 =
W3 = W1 + W2
W4 = W3 . C
vD = = ω . R
me =
8. Rotating mass with propelling torqueFormulae:W1 = m . v2 . 0,18
W2 =
W3 = W1 + W2
W4 = W3 . C
vD = = ω . R
me =
9. Rotating mass with propelling forceFormulae:W1 = m . vD
2 . 0,18
W2 = =
W3 = W1 + W2
W4 = W3 . C
vD = = ω . R
me =
10. Mass in controlled descent without propelling forceFormulae:W1 = m . v2 . 0,5 W2 = m . g . sW3 = W1 + W2
W4 = W3 . C
vD = v
me =
Reactive force Q(N)
Q =
Braking time (s)
t =
Deceleration (m/s2)
a =
These formulae will give you approximate values toassist in the selection of a shock absorber but a safetymargin should always be applied. (Precise values canonly be calculated if actual parameters are known).
Shock absorberFormulae and examples of calculation
v . RL
2 . W3
vd2
F . r . sR
M . sR
2 . W3
vD2
1,2 . W3
s
2,6 . s vD
0,6 . vD2
s
2 . W3
vD2
2 . W3
vD2
M . sR
v . RL
2 . W3
vD2
M . sR
v . RL
2 . W3
vD2
NOTE: massevenly spread.
NOTE: massevenly spread.
NOTE: massevenly spread.
226 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Shock absorberRequest for technical assistance
with your applicationIf you would like assistance with an application, please enlarge this form by 200% (to A4 size), fill in as muchinformation as possible and return it by fax to our technical team.
Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
For which machine, fitting or application do you need help selecting a shock absorber?
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
What material is there at the end of stroke?Rubber cushion � Shock-absorbing cylinder �Brake cylinder � No shock-absorber �Other �
What problems do you have? Safety � Stopping too quickly �Stopping too slowly � Incorrect deceleration �Frequent breakages/faults � Continuous operation �
Please see preceding pages to select your intended use.
Otherwise use the space below for a sketch or any other description thereof.
Total weight of mass to be dampened m (kg) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . External influences - Application
Impact velocity on shock-absorber vD (m/s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ouside �
Propelling force of cylinder or other F (N) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Extrusions into soft water �
Electric motor power P (kW) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Extrusions into sea water �
No of shocks per hour C (1/h) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Marine environment �
N° of shock-absorbers in parallel n () . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Acidic environment �
(Desired) shock-absorber stroke length s (mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electrical contact �
Total height of fall h (m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . In foundry �
Torque M (Nm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . In pneumatic cylinder �
Friction coefficient μμ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Radius L/R/r (m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Other . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Other info. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fixtures
R - Flange behind
F - Flange in front
S - Foot mounting
C - Oscillating mounting
HPC technical assistanceFax +33 (0)4 37 490 055
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2271HPC
Part number Min. Max.
Percycle W3
PerhourW4
Returnspringforce(N)
Rodresettime(S)
Max.sideload
angle
Max.impactspeed(m/s)
MC25-MLMC25-MMC25-MHMC75-M1MC75-M2MC75-M3MC150-MMC150-MHMC150-MH2
0,71,84,50,20,92,70,98,6
70,0
2,35,5
13,61,16,3
36,010,086,0
200,0
2,82,82,88,58,58,5
17,017,017,0
226002260022600282002820028200340003400034000
3,6-7,63,6-7,63,6-7,64,5-11,04,5-11,04,5-11,03,0-5,03,0-5,03,0-5,0
0,20,20,20,30,30,30,40,40,4
2°2°2°2°2°2°2°2°2°
2,62,62,64,34,34,3---
���-�-�--
Priceeach1 to 5
Max. capacity (Nm)Effectiveweight(kgme)
72,02 F
60,72 F
60,72 F
97,36 F
97,36 F
128,96 F
128,96 F
128,96 F
128,96 F
Stock*
*Depending on availability
Non adjustable MCSelf-compensating shock-absorber
- MC25 and MC75: integratedstroke end stop and noisereducing buffer
- MC150: mechanical stoprequired about 1mm beforethe shock-absorber stroke-end.
- Working temperature 0 to+65°C
- Materials:Body: blackened steelRod: stainless steelBuffer: steel with elastomerinsert (MC25 and MC75 only)
.Accessories.- See stroke end stop and
universal universal flange
.Info..- MC150: to avoid damaging
the EPDM membrane do notturn the rod
- For better heat dissipation, donot paint shock-absorbers
S/P13 6,6
5,1
Ø5,1 3Stroke
57,7
3,2
Ø7,6
5,1
M10 x 1
14,7
S/P14 10
3,2
Ø8,4 4Stroke
69,8
3,2
Ø7,6
5,1
M12 x 1
18,1
S/P12 12,5S/P1712 5
Stroke
87
4,8
6112
M14 x 1,5
17,5
MC25
MC75
MC150M
1+List
6+-10%
20+On request
Qty.Disc.
DISCOUNTS
228 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Can be adjuster in-situ to suit applicationRMSAAdjustable shock-absorber
AF 114,6
C12 AF1 Coursel1
d1
d3
118143189
13,516,516,5
4,86,36,3
17,022,422,4
17,023,023,0
688
243030
182323
RMSA-500RMSA-600RMSA-900
M20 x 1,5M25 x 1,5M25 x 1,5
19,0025,4040,00
Partnumber
Stroke(mm) A B C d1 d2 d3 l1 AF AF1
- Standard part with locknut and knob- Materials:
Body: blackened steelRod: stainless steel
- Adjustment. The adjustment ring is calibrated from0 to 9. The adjustment knob is secured by a setscrew which must be slackened with a 1.5mm Allenkey before carrying out adjustment (do not removecompletely ). After installing the shock absorber,cycle the machine a few times and alter theadjustment so that optimum deceleration is achieved. Forhard impact at start of stroke turn ring towards 9, forharder impact at the end of the stroke, turn towards 0.Retighten the set screw.
- Max. impact velocity 3,6m/s - Working temperature -12° to +90°C- Stroke end stop and anti-noise
buffer fully integrated- Max. angle of incidence: 2°
.Uses.- Upon impact of the load the
piston moves back causing animmediate build up of internalpressure. Oil is then allowed topass through the meteringorifices bringing the loadsmoothly to rest. Fast reset isassured by an anti-return valveand spring incorporated in thepiston.
.Accessories.- Universal flange STC...- Stroke end stop MF...
A
d2
B maxi.
Part number
percycle W3
per hour W4
Min.(kg)
Max.(kg)
Min.(N)
Max.(N)
Rodtimereset(S)
Weight(kg)
RMSA-500RMSA-600RMSA-900
2568
100
45 00068 00090 000
2,309,00
14,00
2261 3602 040
51010
103035
0,100,200,40
0,130,310,40
��-
Priceeach1 to 5
Max. energy capacity (Nm)Effective weight (kgme)
Return spring force
206,59 F
327,85 F
441,87 F
Stock*
1+List
6+-10%
10+-15%
15+On request
Qty.Disc.
DISCOUNTSnewdiscounts
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2291HPC
Part number Ød1 Ød2 Ød3 Ød4 b1 b2 b3 b4 b5For shock-absorber
MF-10MF-12MF-14MF-20MF-25
M10x1M12x1
M14x1,5M20x1,5M25x1,5
4,54,54,55,55,5
4,54,54,55,55,5
8881010
3838454747
2525293535
1212161616
25,425,435,035,035.0
555
1010
MC25MC75MC150
RMSA500RMSA600-900
�----
Price each1 to 5
38,65 F
38,65 F
41,56 F
38,16 F
49,11 F
Stock*
*Depending on availability
Mounting accessory MFShock-absorber - universal flange
- Universal flange for shock-absorber
Ød1
Ød3
b3
Ød2
b1
b4
b5
Ød4
b2
MF10 to 14Ød1
25,5
b3Ød2
b1
b4
Ød3
b5
Ød4
b2
MF20 to 25
Typical application
1+List
6+-10%
10+-15%
15+On request
Qty.Disc.
DISCOUNTS
newdiscounts
230 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Mounting accessorySTCShock absorber - stop collar
- Stop collar for shock absorber- Warning: for certain shock absorbers, the use of
this stop collar is essential
Part number Ød1 Ød5 Ød6 b3 b4 b5 AFFor shock-absorber
STC10STC12STC14STC20STC25
M10x1M12x1
M14x1,5M20x1,5M25x1,5
--
14,520,525,5
14,316,018,025,032,0
2020192545
--
121216
--
060810
--
132227
MC25MC75MC150
RMSA500RMSA600-900
�---�
Price each1 to 510,93 F
10,93 F
11,88 F
18,49 F
28,39 F
Ød1 Ød6
b3
STC10 to 12
Ød1
AF
b3
Ød6
b4b5
Ød5
STC14 to 25
Typicalapplication
Stock*
*Depending on availability
1+List
6+-10%
10+-15%
15+On request
Qty.Disc.
DISCOUNTS
newdiscounts
Feets
Articulated levelling footpage 238
p.232 p.233
p.248 p.252 p.254
Fixed rubberlevelling foot
Threadedadjustable feet
Flexible machinemount
Air cushions Vibration dampeningfoot
p.244 p.247
Fixed levellingfoot
p.234 p.238
Articulatedlevelling foot
Articulated levellingfoot
StainlesssteelStainlesssteel
Extension of range
New
New
NEW!
Stainless steel articulated foot
232 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Fixed rubber levelling footMaximum load 3 150NPFC
- Levelling support for small parts- Materials:
Rod: steel or stainless steel 304Base: NBR rubber hardness shore 70
SteelPFC40-8PFC40-10PFC40-12Stainless steelPFC40-8/SSPFC40-10/SSPFC40-12/SS
404040
404040
M8M10M12
M8M10M12
161616
161616
414141
414141
252525
252525
180022503150
180022503150
2,56 F
3,02 F
3,47 F
3,18 F
3,45 F
4,64 F
Part number ØD ØF A H BMax.
load (N)Price each
1 to 49
A
ØF
ØD
H
B
Stock*
���
���
*Depending on availability
steel or
stainless steel
50+-5%
100+On request
1+List
Qty.Disc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2331HPC
Threaded adjustable feet
W
L
ØM
H
TAD5008-25-1TAD5009-25-1TAD5010-25-1TAD5011-25-1TAD5013-25-1TAD5014-25-1TAD5015-25-1TAD5019-25-1TAD5008-40-1TAD5009-40-1TAD5010-40-1TAD5011-40-1TAD5013-40-1TAD5014-40-1TAD5015-40-1TAD5019-40-1TAD5008-55-1TAD5009-55-1TAD5010-55-1TAD5011-55-1TAD5013-55-1TAD5014-55-1TAD5015-55-1TAD5019-55-1
M6M6M8M8M10M10M10M12M6M6M8M8M10M10M10M12M6M6M8M8M10M10M10M12
12,525,012,525,015,037,550,050,012,525,012,525,015,037,550,050,012,525,012,525,015,037,550,050,0
252525252525252540404040404040405555555555555555
202020202020202020202020202020202020202020202020
5050505050505050
100100100100100100100100100100100100250250250250
PolyethylenePolyethylenePolyethylenePolyethylenePolyethylenePolyethylenePolyethylenePolyethylenePolyethylenePolyethylenePolyethylenePolyethylenePolyethylenePolyethylenePolyethylenePolyethylenePolypropylenePolypropylenePolypropylenePolypropylenePolypropylenePolypropylenePolypropylenePolypropylene
�
�
�
�
�
-�
----�
-�
�
�
---�
-�
�
�
1,37 F
1,50 F
1,56 F
1,64 F
1,64 F
on request2,33 F
1,92 F
1,80 F
1,50 F
1,24 F
1,90 F
1,69 F
1,56 F
1,85 F
1,92 F
2,33 F
2,51 F
2,17 F
2,23 F
2,26 F
2,61 F
2,94 F
2,42 F
Part numberPrice each
1 to 5ØM L W H
Max.static
load (kg) Material
*Depending on availability
Stock*
Simplest solution
6+-10%
40+-20%
100+On request
1+List
QtyDisc.
DISCOUNTS20+
-15%60+
-25%
Economy range
- Adjustable feet- Tilt angle : 25°- Materials:
Base: polyethylene orpolypropyleneRod: mild steel, bright zinc plated
Plastic and steel TAD
234 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Fixed levelling foot Ø40 and Ø50Accepts loads up to 11.000NPR40
PR50- Levelling foot- Rubber anti-slip sole (NBR 70 Shore )- Black glass fibre reinforced Polyamide base- Threaded ball ended rod in plated steel
or stainless steel- Nut not supplied
.Advantages.- Self aligning on floor due to use of ball ended rod- Flexible and non-slip sole
.Info..- If subjected to vibration,
the static loads shownshould be reduced
ØDThread
ØF B A A/F G H H1
Staticload(N)
Steel shaftPR40-8-50PR40-8-100PR50-10-75PR50-10-125PR50-12-75PR50-12-125Stainless steel shaftPR40-8-50/SSPR40-8-100/SSPR50-10-75/SSPR50-10-125/SSPR50-12-75/SSPR50-12-125/SS
4,79 F
6,60 F
6,44 F
7,68 F
7,07 F
7,88 F
8,91 F
12,70 F
11,89 F
14,60 F
10,94 F
13,35 F
Priceeach
1 to 49Part number
40 M8 50 27 12 16,5 77 80 1000040 M8 100 27 12 16,5 127 130 1000050 M10 75 30 14 20,0 105 108 1100050 M10 125 30 14 20,0 155 158 1100050 M12 75 30 14 20,0 105 108 1100050 M12 125 30 14 20,0 155 158 11000
40 M8 50 27 12 16,5 77 80 1000040 M8 100 27 12 16,5 127 130 1000050 M10 75 30 14 20,0 105 108 1100050 M10 125 30 14 20,0 155 158 1100050 M12 75 30 14 20,0 105 108 1100050 M12 125 30 14 20,0 155 158 11000
50+-5%
100+On request
1+List
Qty.Disc.
DISCOUNTS
Steel or stainlesssteel shaft
H1
A/F
H B
AG
30°
ØD
M
NEW!
With non-slip
base
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2351HPC
Articulated foot Ø83Maximum load 20.000N PR85
30°
55
Type H Type MØF
Ø8,5 Ø8,5
ØD
A/F
GA
BH
H1
55
ØD
GA
BHH1
A/F
30°
Hexagonal For adjustment
- Articulated foot- Non slip base- Materials:
Base: Black glass reinforced polyamide (Shore hardness 70)Rod: Zinc plated steel or stainless 304 (nut not supplied)
- Supplied without nut
.Advantages.- Articulated rod allows auto-alignment
with the ground- Sole material ensures flexibility and grip
.Info..- Values given for static loads will be reduced in case of a vibrating load
ØDThread
ØF B A A/F G H H1
Staticload (N) Type
Steel rodPR85-12-75PR85-12-125PR85-16-75PR85-16-150PR85-16-200PR85-20-125PR85-20-175PR85-20-225Stainless steel rodPR85-12-75/SSPR85-12-125/SSPR85-16-75/SSPR85-16-150/SSPR85-16-200/SSPR85-20-125/SSPR85-20-175/SSPR85-20-225/SS
M12M12M16M16M16M20M20M20
M12M12M16M16M16M20M20M20
7512575150200125175225
7512575150200125175225
8,63 F
9,64 F
9,07 F
10,67 F
11,72 F
9,88 F
11,29 F
12,80 F
14,63 F
16,82 F
14,63 F
17,90 F
20,15 F
20,48 F
24,10 F
29,12 F
Priceeach
1 to 49Part number Stock*
8383838383838383
8383838383838383
1414161616171717
1414131313171717
2727272727272727
2727272727272727
3838383838414141
3838414141414141
116166116191241169219269
116166119194244169219269
1500015000200002000020000200002000020000
1500015000200002000020000200002000020000
HHHHHMMM
HHMMMMMM
��������
��������
113163113188238166216266
113163116191241166216266
*Depending on availability
Steel orstainlesssteel rod
With non-slip
base
ØF
50+-5%
100+On request
1+List
Qty.Disc.
DISCOUNTS
236 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Articulated foot Ø103Maximum load 25.000NPR105
30°
73
ØF
Ø12,5
ØD
A/F
GA
BH
H1
ØDThread
ØF B A A/F G H H1
Staticload(N)
Steel rodPR105-16-75PR105-16-150PR105-16-225PR105-20-125PR105-20-200PR105-20-250PR105-24-125PR105-24-200PR105-24-250Stainless steel rodPR105-16-75/SSPR105-16-150/SSPR105-16-225/SSPR105-20-125/SSPR105-20-200/SSPR105-20-250/SSPR105-24-125/SSPR105-24-200/SSPR105-24-250/SS
M16M16M16M20M20M20M24M24M24
M16M16M16M20M20M20M24M24M24
75150225125200250125200250
75150225125200250125200250
14,43 F
17,39 F
21,37 F
14,63 F
17,33 F
21,37 F
14,63 F
17,33 F
21,37 F
25,60 F
33,83 F
43,56 F
29,63 F
40,63 F
47,18 F
29,60 F
40,63 F
47,18 F
�������-�
������---
Priceeach
1 to 49Part number Stock*
103103103103103103103103103
103103103103103103103103103
202020202020202020
202020202020202020
323232323232323232
323232323232323232
515151515151515151
515151515151515151
129204279179254304179254304
129204279179254304178253303
250002500025000250002500025000250002500025000
250002500025000250002500025000250002500025000
126201276176251301176251301
126201276176251301175250300
*Depending on availability
- Articulated foot- Non slip base- Materials:
Base: Black glass reinforced polyamide (Shore hardness 70)Rod: Zinc plated steel or stainless 304 (nut not supplied)
.Advantages.- Articulated rod allows auto-alignment
with the ground- Sole material ensures flexibility and grip
.Info..- Values given for static loads will
be reduced in case of a vibrating load
Steel orstainlesssteel rod
For adjustment 50+-5%
100+On request
1+List
Qty.Disc.
DISCOUNTS
With non-slip
base
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2371HPC
Articulated foot Ø123Maximum load 35.000N PR125
30°ØF
H1H A/F
Ø12,5
87
ØD
GA
For adjustment
B
- Articulated foot- Non slip base- Materials:
Base: Black glass reinforced polyamide (Shorehardness 70)Rod: Zinc plated steel or stainless 304(nut not supplied)
.Advantages.- Articulated rod allows auto-alignment
with the ground- Sole material ensures flexibility and grip
.Info..- Values given for static loads will be
reduced in case of a vibrating load
ØDThread
ØF B A A/F G H H1
Staticload(N)
Steel rodPR125-16-75PR125-16-150PR125-16-225PR125-20-125PR125-20-200PR125-20-250PR125-24-125PR125-24-200PR125-24-250PR125-30-125PR125-30-200PR125-30-250Stainless steelPR125-16-75/SSPR125-16-150/SSPR125-16-225/SSPR125-20-125/SSPR125-20-200/SSPR125-20-250/SSPR125-24-125/SSPR125-24-200/SSPR125-24-250/SSPR125-30-125/SSPR125-30-200/SSPR125-30-250/SS
M16M16M16M20M20M20M24M24M24M30M30M30
M16M16M16M20M20M20M24M24M24M30M30M30
75150225125200250125200250125200250
75150225125200250125200250125200250
16,79 F
19,75 F
23,07 F
16,71 F
19,47 F
22,89 F
16,71 F
19,47 F
22,89 F
17,93 F
21,44 F
23,83 F
28,90 F
37,11 F
46,83 F
34,37 F
43,91 F
50,46 F
34,37 F
43,91 F
50,46 F
39,01 F
49,78 F
56,72 F
���������-�-
-�-��-------
Priceeach
1 to 49Part number Stock*
123123123123123123123123123123123123
123123123123123123123123123123123123
202020202020202020262626
202020202020202020262626
373737373737373737373737
373737373737373737373737
575757575757575757585858
575757575757575757585858
133208285185260310185260310186261311
135210285185260310185260310186261311
350003500035000350003500035000350003500035000350003500035000
350003500035000350003500035000350003500035000350003500035000
132207282182257307182257307183258308
132207282182257307182257307183258308
*Depending on availability
With non-slip
base
Steel orstainlesssteel rod
50+-5%
100+On request
1+List
Qty.Disc.
DISCOUNTS
238 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
ØF
A/F
G
ØD
B
A
H
10°
Articulated foot with solid base Ø50Accepts loads up to 4.000NPTA50
PTA50SS
Steel footPTA50-10-100PTA50-12-100PTA50-12-150PTA50-16-75PTA50-16-100PTA50-16-150Stainless steel footPTA50-10-75/SSPTA50-10-125/SSPTA50-12-75/SSPTA50-12-125/SSPTA50-16-75/SSPTA50-16-100/SSPTA50-16-150/SS
50 M10 100 29 14 19 129 400050 M12 100 29 14 19 129 400050 M12 150 29 14 19 179 400050 M16 75 29 16 19 104 400050 M16 100 29 16 19 129 400050 M16 150 29 16 19 179 4000
50 M10 75 29 14 19 104 400050 M10 125 29 14 19 154 400050 M12 75 29 14 19 104 400050 M12 125 29 14 19 154 400050 M16 75 34 13 19 109 400050 M16 100 34 13 19 134 400050 M16 150 34 13 19 184 4000
12,97 F
12,97 F
14,00 F
13,30 F
14,21 F
16,11 F
14,05 F
15,98 F
14,05 F
15,98 F
16,41 F
17,04 F
18,74 F
Part numberThread Load
ØD ØF B A A/F G H static (N)Price each
1 to 14
1+List
15+-5%
20+-10%
25+-15%
40+On request
Qty.Disc.
DISCOUNTS
- Articulated foot- Up to +/- 10° from vertical- Materials:
Steel version:Base: Galvanised sheet steel C40Shaft: Galvanised steel (nut not supplied)Sole: Vulcanised NBR rubber, hardness 80° ShoreStainless steel version:Base: Sheet stainless steel 304Shaft: Stainless steel 304 (nut not supplied)Sole: Vulcanised NBR rubber, hardness 80° Shore
.Advantages.- Excellent Price-Quality ratio
NEW!
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2391HPC
ØF
A/F
G
ØD
B
A
H
10°
Articulated levelling foot, pressed base Ø80Accepts loads up to 10.000N PTA80
PTA80SS
Steel footPTA80-12-100PTA80-12-150PTA80-16-100PTA80-16-150PTA80-20-100PTA80-20-150PTA80-20-200Stainless steel footPTA80-12-100/SSPTA80-12-150/SSPTA80-16-100/SSPTA80-16-150/SSPTA80-20-100/SSPTA80-20-150/SSPTA80-20-200/SS
80 M12 100 35 14 25 135 1000080 M12 150 35 14 25 185 1000080 M16 100 35 16 25 135 1000080 M16 150 35 16 25 185 1000080 M20 100 36 20 25 136 1000080 M20 150 36 20 25 186 1000080 M20 200 36 20 25 236 10000
80 M12 100 35 14 25 135 1000080 M12 150 35 14 25 185 1000080 M16 100 35 13 25 135 1000080 M16 150 35 13 25 185 1000080 M20 100 38 17 25 138 1000080 M20 150 38 17 25 188 1000080 M20 200 38 17 25 238 10000
18,42 F
20,48 F
20,31 F
22,47 F
21,34 F
23,97 F
26,16 F
28,09 F
30,17 F
30,17 F
32,26 F
33,83 F
36,40 F
40,33 F
Part numberThread Load
ØD ØF B A A/F G H static (N)Price each
1 to 14
1+List
15+-5%
20+-10%
25+-15%
40+On request
Qty.Disc.
DISCOUNTS
- Articulated foot- Up to +/- 10° from vertical- Materials:
Steel version:Base: Galvanised sheet steel C40Shaft: Galvanised steel (nut not supplied)Sole: Vulcanised NBR rubber, hardness 80° ShoreStainless steel version:Base: Stainless steel sheet 304Shaft: Stainless steel 304 (nut not supplied)Sole: Vulcanised NBR rubber, hardness 80° Shore
.Advantages.- Excellent Price-Quality ratio
NEW!
240 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Articulated levelling foot, pressed bolt-down base Ø80Accepts loads up to 10.000NPTAF80
PAMF80
ØF
A/F
B
H
10°
NEW!Large hole
allows use of
a rawlplug
Large spacing
allows use of a
hammer drill
Steel footPTAF80-12-100PTAF80-12-150PTAF80-16-100PTAF80-16-150PTAF80-20-100PTAF80-20-150PTAF80-20-200Stainless steel footPAMF80-12-100PAMF80-12-150PAMF80-16-75PAMF80-16-125PAMF80-16-175PAMF80-20-100PAMF80-20-150PAMF80-20-200
80 M12 100 35 14 25 135 1000080 M12 150 35 14 25 185 1000080 M16 100 35 16 25 135 1000080 M16 150 35 16 25 185 1000080 M20 100 36 20 25 136 1000080 M20 150 36 20 25 186 1000080 M20 200 36 20 25 236 10000
80 M12 100 35 14 25 135 1000080 M12 150 35 14 25 185 1000080 M16 75 35 13 25 110 1000080 M16 125 35 13 25 160 1000080 M16 175 35 13 25 210 1000080 M20 100 38 17 25 138 1000080 M20 150 38 17 25 188 1000080 M20 200 38 17 25 238 10000
22,04 F
23,89 F
23,64 F
25,95 F
24,86 F27,22 F
29,63 F
34,39 F
36,46 F
34,90 F
37,52 F
40,12 F
40,12 F
42,73 F
46,63 F
Part numberThread Load
ØD ØF B A A/F G H static (N)Price each
1 to 5
1+List
6+-5%
10+-10%
15+-15%
20+On request
Qty.Disc.
DISCOUNTSØD
54
A Ø15
- Articulated foot- Up to +/- 10° from vertical- With non-slip sole- Materials:
Steel version:Base : Galvanised sheet steel C40Shaft: Galvanised steel (nut not supplied)Sole: Vulcanised NBR rubber, hardness 80° ShoreStainless steel version:Base: Stainless steel sheet 304Shaft: Stainless steel 304 (nut not supplied)Sole: Vulcanised NBR rubber, hardness 80° Shore
.Advantages.- Easy to secure due to large distance
between shaft and mounting hole- Excellent
Price-Quality ratio
G
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2411HPC
ØF
A/F
G
ØD
B
A
H
10°
Articulated levelling foot, pressed base Ø100Accepts loads up to 15.000N PTA100
PTA100SS- Articulated foot- Up to +/- 10° from vertical- Materials:
Steel version:Base: Galvanised sheet steel C40Shaft: Galvanised steel (nut not supplied)Sole: Vulcanised NBR rubber, hardness80° ShoreStainless steel version:Base: Stainless steel sheet 304Shaft: Stainless steel plate 304 (nut not supplied)Sole: Vulcanised NBR rubber, hardness 80° Shore
.Advantages.- Excellent Quality/Price
ratio
Steel footPTA100-16-100PTA100-16-150PTA100-16-200PTA100-20-100PTA100-20-150PTA100-20-200PTA100-24-100PTA100-24-150Stainless steel footPTA100-16-100/SSPTA100-16-150/SSPTA100-16-200/SSPTA100-20-100/SSPTA100-20-150/SSPTA100-20-200/SSPTA100-24-100/SSPTA100-24-150/SS
100 M16 100 38,0 16 28 137,5 15000100 M16 150 38,0 16 28 187,5 15000100 M16 200 38,0 16 28 237,5 15000100 M20 100 39,0 20 28 138,5 15000100 M20 150 39,0 20 28 188,5 15000100 M20 200 39,0 20 28 238,5 15000100 M24 100 39,0 24 28 138,5 15000100 M24 150 39,0 24 28 188,5 15000
100 M16 100 39,5 13 30 139,5 15000100 M16 150 39,5 13 30 189,5 15000100 M16 200 39,5 13 30 239,5 15000100 M20 100 43,0 17 30 143,0 15000100 M20 150 43,0 17 30 193,0 15000100 M20 200 43,0 17 30 243,0 15000100 M24 100 44,0 20 30 144,0 15000100 M24 150 44,0 20 30 194,0 15000
22,47 F
24,70 F
25,51 F
23,57 F
26,16 F
28,77 F
27,84 F
30,55 F
43,71 F
45,26 F
48,89 F
46,83 F
49,94 F
53,58 F
50,46 F
52,04 F
Part numberThread Load
ØD ØF B A A/F G H static (N)Price each
1 to 14
1+List
15+-5%
20+-10%
25+-15%
40+On request
Qty.Disc.
DISCOUNTS
NEW!
242 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
ØF
A/F
B
10°
ØD69
A Ø15G
100 M16 100 38 16 28 137,5 15000100 M16 150 38 16 28 187,5 15000100 M16 200 38 16 28 237,5 15000100 M20 100 39 20 28 138,5 15000100 M20 150 39 20 28 188,5 15000100 M20 200 39 20 28 238,5 15000100 M24 100 39 24 28 138,5 15000100 M24 150 39 24 28 188,5 15000
100 M16 100 39,5 13 30 139,5 15000100 M16 150 39,5 13 30 189,5 15000100 M16 200 39,5 13 30 239,5 15000100 M20 100 43,0 17 30 143,0 15000100 M20 150 43,0 17 30 193,0 15000100 M20 200 43,0 17 30 243,0 15000
27,68 F
29,85 F
30,68 F
28,77 F
31,36 F
33,97 F
33,07 F
35,86 F
50,03 F
51,60 F
55,24 F
53,15 F
56,31 F
59,94 F
Part numberThread Load
ØD ØF B A A/F G H static (N)Price each
1 to 5
Articulated levelling foot, pressed bolt-down base Ø100Accepts loads up to 15.000NPTAF100
PAMF100
1+Prix
6+-5%
10+-10%
15+-15%
20+Sur demande
QtéRem.
REMISES
Large hole
allows use of
a rawlplug
- Articulated foot- Up to +/- 10° from vertical- With non-slip sole- Materials:
Steel version:Base: Galvanised sheet steel C40Shaft: Galvanised steel (nut not supplied)Sole: Vulcanised NBR rubber, hardness 80° ShoreStainless steel version:Base: Stainless sheet steel 304Rod: Stainless steel plate 304 (nut not supplied)Sole: Vulcanised NBR rubber, hardness 80° Shore
.Advantages.- Easy to install due to large distance between shaft andmounting hole
- Excellent Quality/Price ratio
Steel footPTAF100-16-100PTAF100-16-150PTAF100-16-200PTAF100-20-100PTAF100-20-150PTAF100-20-200PTAF100-24-100PTAF100-24-150Stainless steel footPAMF100-16-100PAMF100-16-150PAMF100-16-200PAMF100-20-100PAMF100-20-150PAMF100-20-200
Large spacing
allows use of a
hammer drill
NEW!
H
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2431HPC
Stainless steel articulated levelling footMaximum load 9.000N PAMSS
- Articulated foot- Swivel: +/- 5° from vertical- Materials:
Base and rod: stainless steel 1.4301 (304)Sole: vulcanised rubber (Shore hardness 90)
- Ø30 and Ø38mm bases available
.Uses.- Laboratory furniture- Medical and food industries
.Note.- Values for static load given at 50% of rod length.
With dynamic or vibrating loads, value will be lower
M
PAM30-8-25/SSPAM30-8-50/SSPAM30-10-25/SSPAM30-10-50/SSPAM30-10-75/SSPAM38-8-25/SSPAM38-8-50/SSPAM38-10-25/SSPAM38-10-50/SSPAM38-10-75/SSPAM38-12-50/SSPAM38-12-100/SS
141414141414141414141414
2550255075255025507550100
303030303038383838383838
141414141414141414141414
M8M8
M10M10M10M8M8
M10M10M10M12M12
888888888888
3964396489396439648964114
800080008000800080009000900090009000900090009000
14,52 F
15,18 F
14,52 F
15,18 F
17,99 F
16,32 F
17,90 F
16,32 F
17,90 F
19,13 F
17,90 F
20,47 F
Part number A B ØD A/F M G HPrice each
1 to 49
A
A/F
10°
ØD
H
G
B
Static load (N) Stock*
��-�----����
solid stainless steel
Small sizes
50+-5%
100+On request
1+List
Qty.Disc.
DISCOUNTS
*Depending on availability
244 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Stainless steel articulated foot Ø50Maximum load 15.000NPRS50
- Solid levelling support- With non-slip base- Materials:
Base: stainless steel AISI 304Threaded rod: stainless steel AISI 304 (nutnot supplied)Sole: NBR rubber (Shore hardness 70)
.Advantages.- Articulated rod allows auto-alignment with
the ground- Sole material ensures flexibility and grip
PRS50-10-50PRS50-10-75PRS50-10-100PRS50-10-125PRS50-12-50PRS50-12-75PRS50-12-100PRS50-12-125PRS50-14-50PRS50-14-75PRS50-14-100PRS50-14-125
M10M10M10M10M12M12M12M12M14M14M14M14
282828282828282828282828
507510012550751001255075100125
505050505050505050505050
141414141414141414141414
161616161616161616161616
7810312815378
10312815378
103128153
8110613115681
10613115681
106131156
25,77 F
26,99 F
28,16 F
29,56 F
25,77 F
26,99 F
28,16 F
29,56 F
25,77 F
26,99 F
28,16 F
29,56 F
Part number ØM A B ØD A/F G H H1 Price each
1 to 5Max. load
(N) Stock*
*Depending on availability
150001500015000150001500015000150001500015000150001500015000
������������
stainless steel
1+List
6+-5%
10+-10%
15+On request
Qty.Disc.
DISCOUNTS
ØM
G
H
H1
30°
ØD
B
A
A/F
newdiscounts
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2451HPC
Stainless steel articulated foot Ø80
- Levelling foot with solid base- Non slip base- Materials:
Base: stainless steel AISI 304Threaded rod: stainless steel AISI 304 (nut not supplied)Sole: NBR rubber (Shore hardness 70)
.Advantages.- Articulated rod allows auto-alignment with
the ground- Sole material ensures flexibility and grip
Maximum load 30.000N PRS80
PRS80-16-50PRS80-16-75PRS80-16-100PRS80-16-125PRS80-16-150PRS80-16-175PRS80-16-200PRS80-20-75PRS80-20-100PRS80-20-125PRS80-20-150PRS80-20-175PRS80-20-200PRS80-20-225
M16M16M16M16M16M16M16M20M20M20M20M20M20M20
3636363636363636363636363636
507510012515017520075100125150175200225
8080808080808080808080808080
1313131313131313131313131313
19,519,519,519,519,519,519,519,519,519,519,519,519,519,5
86111136159186211236111136161186211236261
89114139164189214239114139164189214239264
3000030000300003000030000300003000030000300003000030000300003000030000
69,54 F
70,29 F
71,12 F
71,84 F
72,69 F
73,44 F
74,28 F
71,50 F
72,31 F
73,07 F
73,88 F
74,64 F
75,46 F
76,25 F
Part number ØM A B ØD A/F G H H1 Price each
1 to 5Max. load
(N)
*Depending on availability
Stock*�-�--��----�--
stainless steel
1+List
6+-5%
10+-10%
15+On request
Qty.Disc.
DISCOUNTSØD
GA
H
B
H1A/F
30°
Flat part
ØM
newdiscounts
246 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Stainless steel articulated foot Ø100Maximum load 55.000NPRS100
G
H
ØD
A
A/F
- Levelling foot with solid base- Non slip base- Materials:
Base: stainless steel AISI 304Threaded rod: stainless steel AISI 304(nut not supplied)Sole: NBR rubber (Shore hardness 70)
.Advantages.- Articulated rod allows auto-alignment
with the ground- Sole material ensures flexibility and
grip ØM
30°
H1
B
PRS100-16-75PRS100-16-100PRS100-16-125PRS100-16-150PRS100-16-175PRS100-16-200PRS100-20-75PRS100-20-100PRS100-20-125PRS100-20-150PRS100-20-175PRS100-20-200PRS100-20-225PRS100-20-250PRS100-24-75PRS100-24-100PRS100-24-125PRS100-24-150PRS100-24-175PRS100-24-200PRS100-24-225PRS100-24-250
M16M16M16M16M16M16M20M20M20M20M20M20M20M20M24M24M24M24M24M24M24M24
43434343434343434343434343434444444444444444
751001251501752007510012515017520022525075100125150175200225250
100100100100100100100100100100100100100100100100100100100100100100
20202020202020202020202020202020202020202020
20202020202020202020202020202020202020202020
118143168193218243118143168193218243268293119144169199219244269294
121146171196221246121146171196221246271296122147172202222247272297
35000350003500035000350003500045000450004500045000450004500045000450005500055000550005500055000550005500055000
91,41 F
94,75 F
97,32 F
100,22 F
102,08 F
107,56 F
91,41 F
88,47 F
97,32 F
100,22 F
102,08 F
107,56 F
110,70 F
114,62 F
91,41 F
94,75 F
97,32 F
100,22 F
102,08 F
107,56 F
110,70 F
114,62 F
Part number ØM A B ØD A/F G H H1 Price each
1 to 5Max. load
(N)
stainless steel
1+List
6+-5%
10+-10%
15+On request
Qty.Disc.
DISCOUNTS
newdiscounts
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2471HPC
1+List
6+-5%
10+-10%
15+On request
Qty.Disc.
DISCOUNTS
Fixed levelling footMaximum load 11.000N PFM
- Levelling support- Materials:
Base and rod: zinc plated or stainless steel 1.4301 (304)Base: NBR rubber (Shore hardness 80)
- Ø80 and Ø100mm bases available- Supplied with 2 nuts, 1 flat washer and
1 brake washer
.Uses.- Laboratory furniture- Medical and food industries
.Note.- Values for static load given at 50% of rod length. With
dynamic or vibrating loads, value will be lower.
SteelPFM80-12-75PFM80-14-100PFM100-12-75PFM100-14-125PFM100-16-125PFM120-20-125Stainless steelPFM80-12-75/SSPFM80-14-100/SSPFM100-12-75/SSPFM100-14-125/SSPFM100-16-125/SSPFM120-20-125/SS
8080100100100120
8080100100100120
M12M14M12M14M16M20
M12M14M12M14M16M20
7510075125125125
7510075125125125
282831313135
282831313135
8989
1013
8989
1013
252528282832
252528282832
103128106156156160
103128106156156160
4500450090009000900011000
4500450090009000900011000
27,07 F
29,91 F
29,05 F
30,37 F
31,68 F
48,11 F
46,63 F
49,72 F
52,82 F
55,39 F
59,39 F
67,51 F
Part number ØD M B A A/F G HPrice each
1 to 5
M
A
A/F
ØD
H
G
B
stainless steel
version
Staticload (N)
248 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
REFERENCE
? ? ? ?
Prix Uni.1 à ?
PMC48-M8PMC62-M10PMC92-M12PMC120-M16PMC160-M16
Part number ØC H ØA ØG S L B B1
Max.load(N)
10,25 F
14,52 F
19,75 F
42,69 F
68,01 F
Price each1 to 5
486292
120160
2330455060
38,050,073,590,0120,0
M8M10M12M16M16
1,53,03,05,03,0
6,28,2
10,216,216,2
6885
110160200
81106128190235
190039005800
1150023000
���--
Stock*
Oval base platePMCFlexible machine mount
- With 2 fixing holes- Maximum loads are given for a
permanent, static vertical load- Materials:
Centre: Natural rubber (60 Shore A)Support: steel
.Uses.- Anti vibration mounting for machines
and all types of motors- Active effective protection for
personnel and surroundings fromharmful effects of vibrations
- Passive protection of sensitivemachines, measuring instruments,equipment and many different typesof machines against shocks andvibration.
ØG
S
ØC
B
H
L
B1
ØA
23000N
6+-5%
10+-10%
20+-15%
30+-20%
50+On request
1+List
Qty.Disc.
DISCOUNTS
newdiscounts
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2491HPC
REFERENCE
? ? ? ?Prix Uni.
1 à ?
PMC150-M16PMC177-M20
Part number ØC H ØA ØG S L B B1
Max.load(N)
40,32 F
58,85 F
Price each1 to 5
150177
51,563,0
110125
M16M20
4,04,5
12,513,0
132150
168184
780016500
�-
Stock*
Square base plate PMCFlexible machine mount
- With 4 fixing holes- Maximum loads are given for a
permanent, static vertical load- Materials:
Centre: Natural rubber (60 Shore A)Support: steel
.Uses.- Anti vibration mounting for machines
and all types of motors- Active effective protection for
personnel and surroundings fromharmful effects of vibrations
- Passive protection of sensitivemachines, measuring instruments,equipment and many different typesof machines against shocks andvibration.
ØG
S
ØC
B
H
B
L
B1
ØA
16500N
6+-5%
10+-10%
20+-15%
30+-20%
50+On request
1+List
Qty.Disc.
DISCOUNTS
newdiscounts
*Depending on availability
250 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
1000
2000
2 4 6 8mm
4000
5000
3000
PCF2-12-60
PCF2-8-46
N
Course
Ch
arg
es s
elo
n F
z(N
)
1000
2000
1 2 3 4 5mm
4000
5000
3000
N
PCF2-12-6
0
PCF2-8-46
Course
Ch
arg
es s
elo
n F
x,y(
N)
PCFConical flexible mount
G±0,5
R
ØA
Fz
Fx
ØB
EH
ØM
D
C
L
Oval base plate
Fy
Load
in d
irect
ion
Fz
Deflection
Deflection
Load
in d
irect
ion
Fx,
y
6+-5%
10+-10%
20+-15%
30+-20%
50+On request
1+List
Qty.Disc.
DISCOUNTS
REFERENCE
? ? ? ?Prix Uni.
1 à ?
PCF2-8-46PCF2-12-60
Part number ØA ØB L D C ØM H G E R16,59 F
16,59 F
��
Price each1 to 5
812
4660
84106
5068
6480
6,511,0
27,551,0
12,516,5
2,02,5
R1,5R2
Stock*
*Depending on availability
newdiscounts- With 2 fixing holes- Suspension mainly by axial spring
action- Materials:
Centre: Natural rubber (60 Shore A)Support: steel
.Uses.- Anti-vibration mounting support for
motors and machines.
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2511HPC
4000
8000
1 2 3 4 5mm
16000
20000
12000
N
PCF4
-20-
109
PCF2-16-93
PCF4-16-78
Course
Ch
arg
es s
elo
n F
x,y(
N)
DeflectionREFERENCE
? ? ? ?Prix Uni.
1 à ?
PCF4-16-78PCF4-16-93PCF4-20-109
Part number ØA ØB L D C1 C2 ØM H G E R17,53 F
51,71 F
55,36 F
Price each1 to 5
161620
7893
109
107120140
90100120
8090
112
657492
111111
568195
19,520,023,0
3,54,34,5
R3R4R4
Square base plate PCFConical flexible mount
- With 4 fixing holes- Suspension mainly by axial spring action- Materials:
Centre: Natural rubber (60 Shore A)Support: steel
.Uses.- Anti-vibration mounting support for
motors and machines.
G±0,5
R
ØA
ØB
E H
ØM
D
C1±0,2
L
C1±
0,2
4000
8000
2 4 6 8mm
16000
20000
24000
12000
N
PCF4-2
0-10
9
PCF4-16-9
3
PCF4-16-78
Course
Ch
arg
es s
elo
n F
z(N
) Fz
Fx
Fy
Load
in d
irect
ion
Fz
Deflection
Load
in d
irect
ion
Fx,
y
6+-5%
10+-10%
20+-15%
30+-20%
50+On request
1+List
Qty.Disc.
DISCOUNTS
newdiscounts
252 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Load daN 5,0 21,0 30,0 52,0 65,0 -Natural frequency Hz 5,6 4,2 3,6 3,2 2,9 -
Load daN 35,0 70,0 100,0 140,0 180,0 -Natural frequency Hz 5,6 4,2 3,6 3,2 2,9 -
Load daN 55,0 100,0 160,0 180,0 220,0 280Natural frequency Hz 5,6 4,2 3,6 3,2 2,9 2,7
Load daN 110,0 200,0 300,0 400,0 500,0 600Natural frequency Hz 5,6 4,2 3,6 3,2 2,9 2,7
Part numberPressure (bar)
1 2 3 4 5 6
CDA-SLM1A
CDA-SLM3A
CDA-SLM6A
CDA-SLM12A
Air cushions for active and passive insulation
Fig.1
Fig.2
Fig.3
Fig.4
Assembly
Isolair®CDASLM
- Air cushion insulating block forpresses, test benches, vibratingtables, compressors, metrologytables, measuring equipment,lasers, microscopes.
- Insulating vibration and absorbingshocks allows noise and cost ofmaintenance to be reduced and forproductivity to be increased.
Typical application
Stability Excellent
Vibrationinsulation
65% to 6Hz89% to 10Hz97% to 25Hz
Shockabsorbtion
Very efficient
Air pressureCDA-SLM 1 1 to 5 barsCDA-SLM 3-12 1 to 6
bars
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2531HPC
ØD
ØD1
ØG
L
Ho
A b
b
d
A
X
T
Ni
Air cushions for active and passive insulationIsolair® CDASLM
5+-5%
10+-10%
20+On request
1+List.
Qty.Disc.
DISCOUNTS
- Can be used with automatic controlsystems
- Efficient in all directions
- Horizontal rigidity = vertical rigidityfor total stability
- Shock absorbing, except in the caseof very high shocks, unit will onlydeform slightly (0-30mm)
- Acoustic gain greater than a steelspring
- Easily integrated
- Reduced height (65 or 90mm)
- Low natural frequency <5Hz
- Built in levelling mechanism +/- 6mm
- Resistant to oil, solvents, acid, ozoneetc
- The construction of the CVD-SLM still allows it to support a load in total safety even with no airpressure. In these conditions in will continue to operate normally but with a naturalfrequency of 10Hz.
CDA-SLM1ACDA-SLM3ACDA-SLM6ACDA-SLM12A
73 65 M10 80 +-5 12 75 28 60 7 3 0,3 65105 65 M12 100 +-5 12 105 52 89 7 3 0,7 180127 90 M12 100 +-6 15 130 60 108 7 3 1,0 280172 90 M12 100 +-6 15 175 96 153 7 3 1,8 600
68,29 F
87,73 F
130,80 F
172,42 F
Part number
Level Max.adjustment Weight load
ØD Ho ØG L Ni X A ØD1 b d T (kg) (kg)Price each
1 to 4
254 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Vibration dampening footMaximum load 70.000NPAV
- Adjustable anti-vibration foot- Reduces noise and vibration- Materials:
Body: cast iron (GGG-40)Threaded rod: steel
.Uses.- Machine-tools, textile machines- Presses, compressors
.Advantages.- Easily positioned, sealing not required- Reduces the wear on the machine- Improves the workshop environment
ØD H h ØMPAV60-M12PAV100-M16PAV123-M20PAV173-M20PAV217-M24
27,99 F
50,59 F
63,28 F
119,30 F
217,96 F
Part number60
100123173217
Polyurethane 80Polyurethane 80Polyurethane 80Polyurethane 80Polyurethane 90
Price each1 to 5
Shock-absorbingmaterial
2730334048
090110120115145
M12M16M20M20M24
5001250300050007000
��---
Optimumworking load (kg)
Deflection(mm)
PAV217-M24
PAV173-M20
1000
PAV100-M16
PAV60-M12
2000
3000
4000
5000
6000
7000
8000
9000
10000
2 4 6 8 10 12
H
h
ØD
PAV123-M20
Load (kg)
mmoorree ssttoocckk
Stock*
*Depending on availability
1+List
6+-5%
10+-10%
15+On request
Qty.Disc.
DISCOUNTS
newdiscounts
Fixings
p.256 p.258
p.261 p.262 p.266 p.268
p.272 p.276
Lifting rings Galvanised aircraftcable
Wire thimble Cable and ropeclamps
Quick fitting cableterminals
Dee and bowshackles
Rigging screw Straight long linkchain
Stainlesssteel Stainlesssteel
p.278 p.280
Quick link Eye screw
Lifting ringspage 256
Until-25%
New
256 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
SWL* SWL* at Weight Price eachØd L H ØD1 ØD2 ØG E ØS (kg) 45° (kg) (kg) 1 to 5
Steel eye boltADL-6MADL-8MADL-10MADL-12MADL-16MADL-20MADL-24MADL-30MADL-36MADL-42MADL-48M
Stainless steel eye boltADL-6M/SSADL-8M/SSADL-10M/SSADL-12M/SSADL-14M/SSADL-16M/SSADL-20M/SSADL-24M/SS
M6M8M10M12M16M20M24M30M36M42M48
M6M8M10M12M14M16M20M24
1313161928303643546168
1313172020273035
36364555647289
108126148166
3536455454637290
2020242936404960687990
2020253030354050
20212630354051658090
100
2020253030354050
679
1212141823243335
768
1010121417
89
101114172125293538
88
101212141622
90140230340700
120018003200460063008600
180300500800
1100150024003600
6095
170240500830
12702300330045006100
--------
0,0600,0600,1100,1700,2900,4500,8801,6402,7104,2506,200
0,0500,0600,1150,1900,1900,2800,4500,900
2,17 F
2,20 F
2,72 F
3,31 F
5,10 F
7,59 F
12,92 F
24,47 F
42,51 F
80,44 F
139,36 F
8,01 F
8,47 F
13,52 F
18,88 F
21,74 F
26,03 F
43,55 F
111,90 F
Part number
36384656657492
111131153168
--------
������-----
����----
Stock*
ADLM
Male eye bolt conforms to DIN580
- ISO thread- Material:
Black stamped steelStainless steel 316
.Mounting.- For safe and correct assembly:
Chamfer the hole into which thebolt will screw or use washers toensure correct seating.
- Before assembly, clean thethreads and corresponding tapped holes
- Screw lifting eye in fully- The load should be lifted in the direction of the thread, +/-
20° and the pulling force should be along the axial plane ofthe eye.
- The use of these lifting eyes at an angle greater than 45° isnot allowed.
- When the load to be lifted is aluminium, avoid leaving theeyes screwed in for long periods to avoid possible corrosion.
.Info..*SWL: SAFE WORKING LOADThe Safe Working Load is calculated by dividing the BreakingStrength by a factor of safety of 5.
Steel eye bolt
Stainless steel eye bolt
Steel or stainless steel
stainless steel
1+List
6+-10%
20+-20%
50+On request
Qty.Disc.
DISCOUNTS
E
S
L
ØD2
ØGØd
H
L
ØD1Until-25%
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2571HPC
SWL* SWL* at Weight Price eachØd L H ØD1 ØD2 ØG E ØS (kg) 45° (kg) (kg) 1 to 5
Steel eye boltADL-6FADL-8FADL-10FADL-12FADL-16FADL-20FADL-24FADL-30FADL-36FADL-42FADL-48F
Stainless steel eye boltADL-6F/SSADL-8F/SSADL-10F/SSADL-12F/SSADL-14F/SSADL-16F/SSADL-20F/SSADL-24F/SS
M6M8M10M12M16M20M24M30M36M42M48
M6M8M10M12M14M16M20M24
36364555637290
108127144170
3536455354637290
2020252934394860698088
1919242930344050
22212631344049658185
102
2020242930354050
911101115172225383545
910111311151520
99
101214162124313241
989
1212141620
90140230340700
120018003200460063008600
180300500800
1100150024003600
6095
170240500830
12702300330045006100
--------
0,0600,0600,1000,1600,2400,3600,7151,4002,3003,5005,670
0,0550,0500,0900,1550,1650,2500,3600,720
2,15 F
2,20 F
2,61 F
3,48 F
4,87 F
7,59 F
13,45 F
26,22 F
45,48 F
89,14 F
143,72 F
7,43 F
8,36 F
12,16 F
16,84 F
18,95 F
23,24 F
34,92 F
75,94 F
Part number
36364552627189
109137147185
--------
����-------
-��-----
Stock*
Steel or stainless steel ADLF
Female eye bolt conforms to DIN582
Steel eye bolt
- ISO thread- Material:
Black stamped steelStainless steel 316
.Mounting.- For safe and correct assembly:
Chamfer the hole into which thebolt will screw or use washers toensure correct seating.
- Before assembly, clean thethreads and corresponding tapped holes
- Screw lifting eye in fully- The load should be lifted in the direction of the thread, +/- 20°
and the pulling force should be along the axial plane of theeye.
- The use of these lifting eyes at an angle greater than 45° isnot allowed.
- When the load to be lifted is aluminium, avoid leaving theeyes screwed in for long periods to avoid possible corrosion.
.Info..*SWL: SAFE WORKING LOADThe Safe Working Load is calculated by dividing the BreakingStrength by a factor of safety of 5.
Stainless steel eye bolt
1+List
6+-10%
20+-20%
50+On request
Qty.Disc.
DISCOUNTS
stainless steel
ØD1
ØD2
ØGØd
H
S
E
Until-25%
258 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Galvanised steel cable7x7 or 7x19 Metal coreCAB
6+-10%
20+-20%
50+On request
1+List.
Qty.Disc.
DISCOUNTS
- Steel cable sold by the reel- Braiding: 1+6 strands of 7 wires up to Ø5mm- Braiding: 1+6 stands of 19 wires for Ø6mm+
.Accessories.- See lifting section of Volume 1- 2009
CAB1.5-100/BCAB2-15/BCAB2-25/BCAB2-50/BCAB2-100/BCAB2.5-15/BCAB2.5-50/BCAB2.5-100/BCAB2.5-250/BCAB3-15/BCAB3-25/BCAB3-50/BCAB3-100/BCAB4-15/BCAB4-25/BCAB4-50/BCAB4-100/BCAB5-15/BCAB5-25/BCAB5-50/BCAB5-100/BCAB6-15/BCAB6-25/BCAB6-50/BCAB6-100/BCAB7-15/BCAB7-25/BCAB7-50/BCAB8-15/BCAB8-25/BCAB8-50/BCAB9-50/BCAB10-25/B
1,5 7x7 145 100 0,982,0 7x7 258 15 0,282,0 7x7 258 25 0,422,0 7x7 258 50 0,852,0 7x7 258 100 1,662,5 7x7 410 15 0,382,5 7x7 410 50 1,352,5 7x7 410 100 2,522,5 7x7 410 250 6,323,0 7x7 581 15 0,573,0 7x7 581 25 0,933,0 7x7 581 50 1,863,0 7x7 581 100 3,854,0 7x7 1030 15 0,994,0 7x7 1030 25 1,804,0 7x7 1030 50 3,324,0 7x7 1030 100 6,535,0 7x7 1620 15 1,535,0 7x7 1620 25 2,545,0 7x7 1620 50 5,435,0 7x7 1620 100 10,406,0 7x19 2140 15 2,266,0 7x19 2140 25 3,706,0 7x19 2140 50 7,486,0 7x19 2140 100 14,167,0 7x19 3450 15 2,987,0 7x19 3450 25 5,007,0 7x19 3450 50 10,008,0 7x19 3810 15 3,888,0 7x19 3810 25 6,768,0 7x19 3810 50 12,969,0 7x19 4830 50 16,62
10,0 7x19 5960 25 10,30
40,35 F
9,67 F
15,83 F
24,96 F
41,62 F
10,10 F
27,04 F
45,78 F
108,16 F
11,18 F
18,25 F
29,49 F
52,17 F
17,67 F
25,28 F
41,14 F
77,65 F
23,07 F
36,74 F
56,41 F
107,47 F
32,29 F
48,53 F
84,90 F
162,42 F
47,81 F
76,35 F
141,96 F
51,54 F
78,35 F
143,01 F
185,48 F
110,85 F
Part number CableØ
Construction Breakingstrength (kg)
Length(m)
Weight per reel (kg)
Price each1 to 5
1+6Strands of 7 wires
1+6Stands of 19 wires
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2591HPC
Stainless steel cable
6+-10%
20+-20%
50+On request
1+List.
Qty.Disc.
DISCOUNTS
7x7 Metal core CAB
- Stainless steel (316) cable sold by the reel- Brarding: 1+6 strands of 7 wires up to ∅6mm
.Accessories.- See lifting section of volume 1-2009
CAB2-15/SSCAB2-25/SSCAB2-100/SSCAB3-15/SSCAB3-25/SSCAB3-100/SSCAB4-15/SSCAB4-25/SSCAB4-100/SSCAB5-15/SSCAB5-25/SSCAB5-100/SSCAB6-15/SSCAB6-25/SSCAB6-100/SS
2,0 7x7 230 15 0,262,0 7x7 230 25 0,442,0 7x7 230 100 1,683,0 7x7 517 15 0,583,0 7x7 517 25 0,963,0 7x7 517 100 3,674,0 7x7 916 15 1,044,0 7x7 916 25 1,724,0 7x7 916 100 6,545,0 7x7 1445 15 1,625,0 7x7 1445 25 3,005,0 7x7 1445 100 10,006,0 7x7 2070 15 2,346,0 7x7 2070 25 3,756,0 7x7 2070 100 14,45
36,40 F
53,74 F
180,28 F
39,00 F
58,59 F
216,68 F
62,06 F
101,74 F
216,68 F
72,97 F
135,56 F
513,10 F
122,89 F
202,82 F
776,60 F
Part numberCable
Ø Construction Breakingstrength (kg)
Length(m)
Weight per reel (kg)
Price each1 to 5
1+6strands of 7 wires
stainless steel
260 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Standard wire thimbleCable accessoryCCL
30+-5%
60+-10%
90+-15%
120+-20%
150+On request
1+List
Qty.Disc.
DISCOUNTS
- Fitting elements- Wire thimble for use with CAB steel cable - Materiel:
Steel Fe360B, zinc plated
.Info..- Not sold individually, please contact us
for details
CCL-3CCL-4CCL-5CCL-6CCL-8CCL-10
3 9 16 0,6 6 2,304 11 19 0,7 7 3,005 14 24 0,8 8 5,006 17 28 1,0 9 8,008 19 33 1,2 12 15,00
10 21 38 1,5 14 23,00
0,29 F
0,29 F
0,33 F
0,37 F
0,49 F
0,71 F
Part numberCable Weight
Ø C B S F (g)Price each
1 to 29
C
B
S
F
�����-
Stock*
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2611HPC
Stainless steel wire thimbleStainless steel cable accessory CCLSS
30+-5%
60+-10%
90+-15%
120+-20%
150+On request
1+List
Qty.Disc.
DISCOUNTS
- Fitting elements- Wire thimble for use with CAB/SS stainless
steel cable- Materiel:
Stainless steel AISI 316
.Info..- Not sold individually, please contact us for
details
CCL-2/SSCCL-3/SSCCL-4/SSCCL-5/SSCCL-6/SS
2 9 15 1 2,003 10 17 1 2,404 11 18 1 3,805 12 22 1 4,806 13 24 1 5,00
0,55 F
0,67 F
0,79 F
1,30 F
1,38 F
Part numberCable Weight
Ø C B S (g)Price each
1 to 29
C
B
S
stainless steel
262 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
- Fitting elements- Flat cable clamp with single or dual bolts- Material:
Clamp: Zinc plated steel Fe360B
.Info..- Not sold individually, please contact us
for details
30+-5%
1+List
Qty.Disc.
DISCOUNTS
SCA
60+-10%
150+On request
90+-15%
120+-20%
Flat cable clampSuitable for cable Ø2-Ø6mm
C
Single bolt
Dual bolts
B
A
E
E
F
A
C
B
2 18 12 5 8 - 0,503 20 14 7 10 - 0,754 22 17 8 12 - 1,155 26 21 9 14 - 2,006 30 25 10 17 - 3,00
2 37 13 5 8 20 1,103 40 15 7 10 21 1,504 43 17 7 13 22 2,505 52 22 9 15 27 4,006 60 26 9 18 33 6,00
Single bolt SCA1-02SCA1-03SCA1-04SCA1-05SCA1-06Dual boltsSCA2-02SCA2-03SCA2-04SCA2-05SCA2-06
0,46 F
0,64 F
0,73 F
0,85 F
0,94 F
0,77 F
0,90 F
1,02 F
1,55 F
1,76 F
�����
�����
Part numberPrice each
1 to 29Ø Weight/100
Cable A B C E F pieces (kg) Stock*
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2631HPC
2 15 11 5,0 7 - 0,4383 17 14 6,0 9 - 0,5204 20 17 7,0 11 - 1,0905 25 19 8,5 13 - 1,4426 30 24 10,0 16 - 2,630
2 30 11 5,0 7 15 0,9263 34 14 6,0 9 17 1,2304 40 17 7,0 11 19 2,2905 50 19 8,5 13 25 3,0906 60 24 10,0 16 30 5,440
Single boltSCA1-02/SSSCA1-03/SSSCA1-04/SSSCA1-05/SSSCA1-06/SSDual boltsSCA2-02/SSSCA2-03/SSSCA2-04/SSSCA2-05/SSSCA2-06/SS
1,29 F
1,64 F
2,02 F
2,76 F
4,45 F
2,11 F
2,80 F
3,84 F
4,84 F
6,83 F
Part numberPrice each
1 to 29Ø Weight
Cable A B C E F /100 pieces (kg)
C
B
A
E
E
F
A
C
B
- Fitting elements- Flat cable clamp with single or dual bolts- Material:
Clamp: Stainless steel 316 plated steel Fe360B
.Info..- Not sold individually, please contact us
for details
Stainless steel flat cable clampSuitable for cable Ø2-Ø6mm SCASS
Single bolt
Dual bolts
30+-5%
1+List
Qty.Disc.
DISCOUNTS60+
-10%150+
On request90+
-15%120+-20%
stainless steel
*Depending on availability
264 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
30+-5%
1+List
Qty.Disc.
DISCOUNTS
SCE
60+-10%
150+On request
90+-15%
120+-20%
U-shaped cable clampSuitable for cable Ø5-Ø16mm
The attached end of the cable should be placed next to the plate, the free end next to the curve of the U
ØD
CE
F
A
L
L1
B
Ø Cable
5 5 25 18 9 M5 5 10 27 16 2,406 6 30 19 10 M6 6 14 33 19 3,908 8 33 20 11 M6 7 16 34 19 4,40
10 10 38 22 12 M8 7 20 44 22 7,5012 12 43 25 14 M10 7 23 56 30 12,7014 14 46 28 16 M10 9 27 56 30 15,5016 16 53 31 18 M10 8 29 65 30 19,50
SCE1-05SCE1-06SCE1-08SCE1-10SCE1-12SCE1-14SCE1-16
0,94 F
1,02 F
1,16 F
1,64 F
2,11 F
2,41 F
3,06 F
������-
Part numberPrice each
1 to 29Int Ø Ø Weight/
U clamp Cable A B C ØD E F L L1 100 pieces (kg) Stock*
*Depending on availability
- Hot stamped clamp for steel cable or rope- Fitting components- Material:
U bolt: zinc plated steel Fe360BPlate: zinc plated steel Fe430B
.Assembly.- For cables Ø5 to Ø12, use 4 cable clamps- For cables Ø12 to Ø16, use 5 cable clamps
.Info..- Not sold individually, please contact us for
details
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2651HPC
5 25 18 9 M5 8 5 15 26 2,406 30 19 10 M6 10 5 20 33 3,808 33 20 10 M6 10 5 23 35 4,50
10 38 22 12 M8 13 6 24 43 7,5012 45 25 16 M10 17 8 30 54 13,0814 46 27 17 M10 17 8 31 56 16,0016 52 31 17 M9 17 9 31 65 20,00
SCE1-05/SSSCE1-06/SSSCE1-08/SSSCE1-10/SSSCE1-12/SSSCE1-14/SSSCE1-16/SS
2,81 F
3,63 F
3,94 F
6,16 F
10,34 F
12,16 F
13,37 F
Part numberPrice each
1 to 29
- Clamp for steel cable or rope- Fitting components- Material:
U bolt + plate: stainless steel
.Assembly.- For cables Ø5 to Ø12, use 4 cable clamps- For cables Ø12 to Ø16, use 5 cable clamps
.Info..- Not sold individually, please contact us for
details
Stainless steel U-shaped clamp Suitable for cable Ø5-Ø16mm SCESS
30+-5%
1+List
Qty.Disc.
DISCOUNTS60+
-10%150+
On request90+
-15%120+-20%
The attached end of the cable should be placed next to the plate, the free end next to the curve of the U
Ø Weight/Cable A B C ØD E F H L 100 pieces (kg)
Ø Cable
L
H
A B
EØD
F
C
stainless steel
266 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Quick fitting cable terminalsFork and eye versionsERCSS
ERLSS- Cable terminals for wires, manual
crimping- Material: Stainless steel 316
.Advantages.- Rapid manual assembly
ForkERC3-6/SSERC4-8/SSERC5-10/SSERC6-12/SSERC8-14/SSEyeERL3-6/SSERL4-8/SSERL5-10/SSERL6-13/SSERL8-14/SS
3 6 6,25 49,0 57,0 8,0 12 14 404 8 7,90 60,5 71,4 8,3 14 19 805 10 9,70 69,0 79,0 10,0 16 22 1206 12 11,00 81,0 93,0 12,0 19 27 2108 14 13,00 106,0 120,0 15,0 24 30 376
3 6 6 48 57 - 10 12 344 8 7 56 69 - 14 14 625 10 8 66 82 - 14 16 886 13 9 83 100 - 17 19 1548 14 10 102 123 - 19 24 278
Part numberWeight
ØD1 ØD2 A L1 L2 L3 KW KW1 (g)Price each
1 to 5
26,84 F
30,28 F
35,56 F
43,81 F
60,24 F
26,27 F
28,60 F
33,86 F
40,97 F
55,25 F
1+Price
6+-10%
20+-20%
50+On request
Qty.Disc.
DISCOUNTS
D2
ØD2
L2
L2
L1
L1
L3
A A
KW1 KW KWKW1
D1CableØ
D1CableØ
ERL Eye
ERL Eye
ERC Fork
ERC Fork
Manually
crimped
NEW!stainless
steel
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2671HPC
Quick fitting threaded cable terminalCable terminal with threaded end ERFSS
ERF3-5-41/SSERF3-6-47/SSERF4-6-47/SSERF4-8-56/SSERF5-8-56/SSERF5-10-62/SSERF6-10-62/SSERF6-12-79/SSERF8-14-88/SSERF8-16-99/SS
3 M5 82 41 10 12 323 M6 88 47 10 12 364 M6 96 47 12 14 544 M8 106 56 12 14 625 M8 112 56 14 16 845 M10 118 62 13 16 966 M10 124 62 16 19 1366 M12 144 79 16 19 1648 M14 168 88 19 24 2988 M16 180 99 19 24 338
28,57 F
28,78 F
31,23 F
32,30 F
36,85 F
37,20 F
44,93 F
47,17 F
64,11 F
66,96 F
Part numberWeight
ØD1 ØG L1 L2 KW KW1 (g)Price each
1 to 5
1+Price
6+-10%
20+-20%
50+On request
Qty.Disc.
DISCOUNTS
L2
L1
KWKW1
ØG
CableØD1
Manually
crimped
1
3 4 5
2
65mm
Mounting arrangements
- Cable terminals for wires, manual crimping- Material : Stainless steel 316
.Advantages.- Easy manual assembly
NEW!
stainless steel
268 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Dee shackle with eye bolt
- Lifting shackle- Marked with pin diameter and SWL.
Also carries CE mark- Material:
Shackle: Steel Fe430B zinc treated
.Info..- SWL: SAFE WORKING LOAD.
The Safe Working Load is calculatedby dividing the Breaking Strengthby a factor of safety of 5.
- Not sold individually, pleasecontact us for details.
20+-5%
1+List
Qty.Disc.
DISCOUNTS
MDR Pin diameters 5-20mm
ØD
A
B
F
ØE
ØC
40+-10%
100+On request
60+-15%
80+-20%
MDR1-05MDR1-06MDR1-08MDR1-10MDR1-12MDR1-14MDR1-16MDR1-18MDR1-20
5 8 18 13 6 23 100 0,0206 12 25 14 6 29 160 0,0408 15 32 18 8 37 250 0,070
10 18 38 22 10 41 400 0,14012 26 50 27 12 56 630 0,26014 27 56 29 14 57 800 0,37016 31 64 35 17 64 1000 0,56018 32 70 36 19 65 1300 0,71020 38 78 40 20 69 1600 0,940
����-��--
2,06 F
2,48 F
2,98 F
3,78 F
5,79 F
6,89 F
8,96 F
13,25 F
16,53 F
Part numberPrice each
1 to 19Pin SWL Weight ØD A B ØC ØE F (kg) (kg) Stock*
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2691HPC
MDR1-05/SSMDR1-06/SSMDR1-08/SSMDR1-10/SSMDR1-12/SSMDR1-14/SSMDR1-16/SSMDR1-20/SS
5 9,5 23,0 33 190 0,0156 12,0 24,0 37 360 0,0308 16,0 35,0 50 540 0,060
10 19,3 45,6 65 720 0,12512 27,0 48,0 72 1080 0,20014 28,0 57,0 83 1260 0,31016 32,8 59,0 89 1680 0,51019 38,0 88,0 124 2400 0,900
3,55 F
3,70 F
4,41 F
6,09 F
11,23 F
16,64 F
26,67 F
52,33 F
Part numberPrice each
1 to 19Pin SWL Weight ØD A L H (kg) (kg)
Stainless steel Dee shackle with eye bolt
- Lifting shackle- Marked with pin diameter and SWL - Material: Stainless steel 316- No marking on the product
.Info..- SWL: SAFE WORKING LOAD.
The Safe Working Load is calculatedby dividing the Breaking Strengthby a factor of safety of 3.
MDRssPin diameters 5-20mm
20+-5%
1+List
Qty.Disc.
DISCOUNTS40+
-10%100+
On request60+
-15%80+
-20%
ØD
LH
A
stainless steel
270 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Bow shackle with eye bolt
- Lifting shackle- Marked with pin diameter and SWL. - Also carries CE mark- Material:
Shackle : Steel Fe430B zinc treated
.Info..- SWL: SAFE WORKING LOAD.
The Safe Working Load is calculatedby dividing the Breaking Strengthby a factor of safety of 5.
- Not sold individually, please contactus for details.
20+-5%
1+List
Qty.Disc.
DISCOUNTS
MLY Pin diameters 5-20mm
40+-10%
100+On request
60+-15%
80+-20%
ØD
ØC
ØEG
F
A
B
MLY1-05MLY1-06MLY1-08MLY1-10MLY1-12MLY1-14MLY1-16MLY1-18MLY1-20
5 8 18 10 5 19 15 100 0,0206 12 24 12 6 24 18 160 0,0308 15 31 16 8 32 24 250 0,070
10 18 38 20 10 38 30 400 0,13012 22 48 24 12 50 36 630 0,23014 24 53 28 15 56 42 800 0,37016 27 61 32 17 64 48 1000 0,56018 36 72 36 18 72 54 1300 0,78020 37 78 41 20 79 60 1600 1,090
����-----
2,86 F
3,02 F
3,20 F
4,39 F
7,95 F
9,41 F
11,66 F
17,94 F
18,58 F
Part numberPrice each
1 to 19Pin SWL Weight ØD A B ØC ØE F G (kg) (kg) Stock*
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2711HPC
MLY1-05/SSMLY1-06/SSMLY1-08/SSMLY1-10/SSMLY1-12/SSMLY1-14/SSMLY1-16/SSMLY1-19/SS
5 10,0 20,0 30 190 0,0156 13,0 26,0 38 360 0,0308 17,0 34,0 50 540 0,080
10 19,0 45,0 65 720 0,13012 24,6 54,0 72 1080 0,24513 28,0 65,0 91 1260 0,37516 33,0 71,0 105 1680 0,45019 40,0 92,5 133 2400 0,860
3,70 F
4,69 F
7,53 F
7,65 F
14,21 F
17,94 F
26,93 F
52,44 F
Part numberPrice each
1 to 19Pin SWL Weight ØD A L H (kg) (kg)
- Lifting shackle- Marked with pin diameter and SWL - Material: Stainless steel 316- No marking on the product
.Info..- SWL: SAFE WORKING LOAD.
The Safe Working Load is calculatedby dividing the Breaking Strengthby a factor of safety of 5.
MLYSS
ØD
A
LH
Pin diameters 5-20mm
20+-5%
1+List
Qty.Disc.
DISCOUNTS40+
-10%100+
On request60+
-15%80+
-20%
Stainless steel bow shackle with eye bolt
stainless steel
272 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Rigging screw with hook/eye
- Stamped Rigging screw with eyeand hook
- Fitting accessories- Material: zinc plated steel Fe430B
.Info..- SWL: SAFE WORKING LOAD.
The Safe Working Load is calculatedby dividing the breaking load by afactor of safety of 3
- ** Not sold individually, pleasecontact us for details
20+-5%
1+List
Qty.Disc.
DISCOUNTS
TAC
ØM
F C
G
H
B
L1
L2
D E
40+-10%
100+On request
60+-15%
80+-20%
Turnbuckle
M5 80 60 40 8 62 40 6 114 176 50 0,055M6 80 74 47 10 76 50 8 141 200 75 0,064M8 105 79 52 11 88 52 10 156 236 165 0,126M10 125 95 61 14 114 60 11 187 276 235 0,214M12 140 105 65 17 122 66 16 226 311 320 0,398M14 170 128 85 18 147 82 15 254 378 430 0,608M16 190 160 97 23 172 105 20 296 466 530 0,845
TAC1-05TAC1-06TAC1-08TAC1-10TAC1-12TAC1-14TAC1-16
2,95 F
3,47 F
4,42 F
6,39 F
9,23 F
12,86 F
17,82 F
����---
Références Prix Uni.*CMU Poids ØM B C D E F G H L1 L2 (kg) (kg)Part number Price each**SWL Weight ØM B C D E F G H L1 L2 (kg) (kg) Stock*
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2731HPC
TAC1-05/SSTAC1-06/SSTAC1-08/SSTAC1-10/SSTAC1-12/SSTAC1-16/SS
M5 9,0 8,3 71 122-179 180 0,046M6 9,5 10,0 90 160-228 360 0,076M8 11,0 12,0 120 210-303 650 0,165M10 13,0 15,8 150 255-376 1000 0,285M12 16,8 20,0 200 305-473 1400 0,515M16 16,3 26,0 245 400-593 2300 1,110
9,33 F
11,20 F
19,27 F
24,66 F
37,03 F
67,70 F
Part numberSWL Weight
ØA B D L1 L2 (kg) (kg) Price each**
Stainless steel rigging screw with hook/eye
- Rigging screw with eye and hook- Fitting accessories- Material: stainless steel 316
.Info..- SWL: SAFE WORKING LOAD.
The Safe Working Load is calculatedby dividing the breaking load by afactor of safety of 3
- ** Not sold individually, pleasecontact us for details
TACSSTurnbuckle
L2
L1
B
ØA
20+-5%
1+List
Qty.Disc.
DISCOUNTS40+
-10%100+
On request60+
-15%80+
-20%
stainless steel
274 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
TCC1-05TCC1-06TCC1-08TCC1-10TCC1-12TCC1-14TCC1-16
M5 80 62 40 6 116 178 50 0,052M6 80 76 50 8 143 205 75 0,065M8 105 88 52 10 165 245 165 0,136M10 125 111 60 12 213 307 235 0,220M12 140 130 66 15 252 350 320 0,420M14 170 147 86 15 277 407 420 0,640M16 190 172 105 20 298 463 530 0,880
3,09 F
3,57 F
4,84 F
6,89 F
9,38 F
14,31 F
19,00 F
���---�
Part numberSWL Weight
ØM B C D E L1 L2 (kg) (kg) Price each*
Rigging screw (hook/hook)
- Stamped Rigging screw with two hooks- Fitting accessories- Material: zinc plated steel Fe430B
.Info..- SWL: SAFE WORKING LOAD.
The Safe Working Load is calculated bydividing the breaking load by a factor ofsafety of 3
- Not sold individually, please contact usfor details
TCC Turnbuckle
ØM
C
D
B
E
L1
L2
Stock*
*Dans la limite du disponible
20+-5%
1+List
Qty.Disc.
DISCOUNTS40+
-10%100+
On request60+
-15%80+
-20%
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2751HPC
TCC1-05/SSTCC1-06/SSTCC1-08/SSTCC1-10/SSTCC1-12/SSTCC1-16/SS
M5 9 71 128-184 180 0,045M6 10 90 160-228 360 0,075M8 9 120 215-309 650 0,165M10 12 150 265-380 1000 0,280M12 15 200 310-480 1400 0,510M16 16 243 400-594 2300 1,060
9,33 F
11,20 F
19,27 F
24,66 F
37,03 F
67,70 F
Part numberSWL Weight
ØA B L1 L2 (kg) (kg) Price each*
Stainless steel rigging screw (hook/hook)
- Rigging screw with two hooks- Fitting accessories- Material:
Clamp : stainless steel 316
.Info..- SWL: SAFE WORKING LOAD.
The Safe Working Load is calculated bydividing the breaking load by a factorof safety of 3
- Not sold individually, please contactus for details
TCCSSTurnbuckle
L2
L1
B
ØA
20+-5%
1+List
Qty.Disc.
DISCOUNTS40+
-10%100+
On request60+
-15%80+
-20%
stainless steel
276 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Straight long link chainConforms to NFE26020 and DIN5685CCHN
- Galvanised steel chain, supplied by the box(Chainbox)
.Applications.- Rigging, safety barriers, signage
.Info..- Under no circumstances should this type of chain
be used for lifting
CHN-2/BCHN-2.5/BCHN-3/BCHN-3.5/BCHN-4/BCHN-4.5/BCHN-5/BCHN-6/BCHN-7/BCHN-8/B
2,0 22 4 25 25 1,562,5 24 5 40 25 2,533,0 26 6 60 25 3,703,5 28 7 75 25 5,304,0 32 8 100 25 6,704,5 34 9 125 25 8,905,0 35 10 155 25 10,006,0 42 12 230 25 15,707,0 49 14 300 25 21,408,0 52 16 400 10 11,60
23,54 F
26,40 F
33,14 F
42,66 F
49,00 F
57,26 F
64,50 F
93,16 F
126,01 F
65,52 F
Part numberCoreØT P E Max carrying load
(kg)Length / chain
box (m)Weight / chain
box (kg)Price each
1 to 5
E
P
ØT
6+-10%
20+-20%
50+On request
1+List.
Qty.Disc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2771HPC
Straight long link stainless steel chainConforms to NFE26020 and DIN5685C CHNSS
- Stainless steel chain, supplied by the box(Chainbox)
.Applications.- Rigging, safety barriers, signage
.Info..- Under no circumstances should this type of chain
be used for lifting
CHN-2/SS/BCHN-2.5/SS/BCHN-3/SS/BCHN-4/SS/BCHN-5/SS/BCHN-6/SS/BCHN-8/SS/B
2,0 22 4 25 25 1,492,5 24 5 40 25 2,543,0 26 6 60 25 3,744,0 32 8 100 25 6,835,0 35 10 155 25 10,646,0 42 12 230 25 15,628,0 52 16 400 10 11,28
78,02 F
114,92 F
165,03 F
276,13 F
430,77 F
629,76 F
430,77 F
Part number Price each1 to 5
E
P
ØT
CoreØT P E Max carrying load
(kg)Length / chain
box (m)Weight / chain
box (kg)
6+-10%
20+-20%
50+On request
1+List.
Qty.Disc.
DISCOUNTS
278 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Quick link
20+-5%
1+List
Qty.Disc.
DISCOUNTS
MRA Ring diameter 4-12mm
40+-10%
100+On request
60+-15%
80+-20%
MRA1-04MRA1-05MRA1-06MRA1-07MRA1-08MRA1-09MRA1-10MRA1-12
4 39,5 31,5 11,5 5,5 12,5 180 1,1705 49,5 39,5 13,0 6,5 16,0 280 2,0506 57,0 45,0 14,5 7,5 19,0 400 3,4507 66,0 52,0 16,0 8,5 21,5 550 5,1008 74,0 58,0 17,5 11,0 24,0 700 7,7009 80,0 62,0 19,0 11,0 26,0 900 10,250
10 89,0 69,0 20,5 12,0 29,0 1100 13,70012 104,5 80,5 23,5 15,0 33,0 1500 23,200
��������
2,55 F
2,88 F
3,43 F
4,17 F
4,92 F
6,49 F
7,16 F
10,25 F
Part numberPrice each
1 to 19SWL Weight for 100
ØD L2 L1 L P E (kg) pieces (kg)
L2
E
L1
L
P
ØD
Stock*
*Depending on availability
- For joining or closing lengths of chain - Screw to secure- Fully tighten to ensure safety CE and SWL
markings- Material:
Link : Steel Fe430B zinc treatedNut: Steel A-42-Fm
.Info..- SWL: SAFE WORKING LOAD.
The Safe Working Load is calculated bydividing the Breaking Strength by afactor of safety of 5.
- Not sold individually, please contact us for details
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2791HPC
MRA1-04/SSMRA1-05/SSMRA1-06/SSMRA1-07/SSMRA1-08/SSMRA1-09/SSMRA1-10/SSMRA1-12/SS
4 40,0 32,0 11,0 6,0 12,0 280 1,2005 48,0 38,0 12,0 7,0 16,0 450 2,1006 57,0 45,0 14,0 9,0 19,0 650 3,5407 66,0 52,0 16,0 8,0 21,0 900 5,2308 73,0 57,0 17,0 12,0 24,0 1100 7,9009 80,0 62,0 19,0 11,0 26,0 1400 10,500
10 89,0 69,0 20,0 13,0 29,0 1800 14,05012 105,0 81,0 23,0 16,0 34,0 2500 23,200
7,52 F
8,40 F
10,73 F
14,47 F
18,85 F
21,87 F
26,71 F
42,48 F
Part numberPrice each
1 to 19SWL Weight for 100
ØD L2 L1 L P E (kg) pieces (kg)
Stainless steel Quick link
- For joining or closing chains - Screw to secure- Fully tighten to ensure safety - Material:
Stainless steel 316Ring/nut X2CrNi
.Info..- SWL: SAFE WORKING LOAD.
The Safe Working Load is calculatedby dividing the Breaking Strengthby a factor of safety of 3.
MRAssRing diameter 4-12mm
20+-5%
1+List
Qty.Disc.
DISCOUNTS40+
-10%100+
On request60+
-15%80+
-20%
L2
E
L1
L
P
ØD
stainless steel
280 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Eye screw
- Eye screw- Stamped ring, closed- Conforms to UNI 6058- ISO thread- Material: Blackened steel C40
20+-5%
1+List
Qty.Disc.
DISCOUNTS
CMA Thread diameter M6-M20
ØD
A
ØE
ØM
C
L
40+-10%
100+On request
60+-15%
80+-20%
CMA1-06CMA1-08CMA1-10CMA1-12CMA1-14CMA1-16CMA1-18CMA1-20
M6 50 7 8,5 12 5 0,012M8 60 9 11,1 16 6 0,025
M10 80 12 13,8 20 8 0,048M12 90 14 16,4 24 10 0,088M14 120 16 19,0 28 12 0,153M16 140 18 21,0 32 14 0,303M18 150 20 24,2 36 16 0,328M20 160 22 26,2 40 18 0,431
����-�-�
6,36 F
6,64 F
9,15 F
10,79 F
14,31 F
14,66 F
16,33 F
20,31 F
Part numberPrice each
1 to 19Weight
ØM L A C ØD ØE (kg) Stock*
Fixingaccessories
Collarspage 284
p.282 p.284
Collars Hose clips
p.288 p.289 p.292 p.294
p.309 p.322 p.324
Band Keys andkeysteel
Circlip Spring pin
Spacer Hexagonalspacers
Blind rivets
Stainlesssteel
Stainlesssteel
282 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
101+-5%
1+List
Qty.Disc.
DISCOUNTS201+-10%
501+On request
301+-15%
401+-20%
0,48 F
0,48 F
0,48 F
0,70 F
0,76 F
0,84 F
0,84 F
0,94 F
1,27 F
1,30 F
2,16 F
2,58 F
2,64 F
2,73 F
2,90 F
3,35 F
3,41 F
5,05 F
5,25 F
5,91 F
9,71 F
8,61 F
10,11 F
11,46 F
12,15 F
19,77 F
EBM013EBM017EBM021EBM027EBM034EBM042EBM049EBM060EBM070EBM076EBM089EBM102EBM104EBM108EBM114EBM133EBM139EBM153EBM159EBM168EBM193EBM204EBM219EBM244EBM273EBM324
Steel U boltEBM For holding tubes/pipes
- Drawn steel wire, tolerance h9, overalltolerance 10
- 2 hexagonal nuts- Material:
Zinc plated (8µm) steel A37 withcorrosion protection.
- Not sold individually, please contactus for details
ØDA
B
CØd
810152025324050506580808080
100100125125125150150150200200250300
1317212734424960707689
102104108114133139153159168193204219244273324
1/43/81/23/41
11/4
11/2
221/4
21/2
331/4
-31/2
441/2
551/2
53/4
67-891012
Ø wire ø fil
A(mm)
B(mm)
C(mm)
Part number
Priceeach
1 to 100Nominal Ø
DNExternal Ø
øDImperial(inches)
3638405055687080
100110115132
-138156168174188194203228
-254289318369
222222303035353540404040-
4040405050505050-
50707070
1923273542505768788499
112-
118124143149165171180207
-233258287340
����������---�---���------
For pipes
M6M6M6M8M8M8M8M8M8M8
M10M10M10M10M10M10M10M12M12M12M14M14M14M14M14M16
5,15/5,305,15/5,305,15/5,307,05/7,207,05/7,207,05/7,207,05/7,207,05/7,207,05/7,207,05/7,208,80/8,958,80/8,958,80/8,958,80/8,958,80/8,958,80/8,958,80/8,95
10,60/10,8010,60/10,8010,60/10,8012,40/12,7012,40/12,7012,40/12,7012,40/12,7012,40/12,7012,40/14,60
Stock*
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2831HPC
101+-5%
1+List
Qty.Disc.
DISCOUNTS201+-10%
401+On request
301+-15%
810152025324050506580
100125150200
1317212734424960707689
114139168219
1/43/81/23/41
11/4
11/2
221/4
21/2
34568
1,83 F
1,86 F
2,13 F
2,99 F
3,33 F
3,46 F
3,62 F
4,01 F
4,24 F
4,56 F
9,16 F
10,42 F
11,63 F
17,40 F
26,77 F
Ø wire ø fil
A(mm)
B(mm)
C(mm)
EIM013EIM017EIM021EIM027EIM034EIM042EIM049EIM060EIM070EIM076EIM089EIM114EIM139EIM168EIM219
Part number
Priceeach
1 to 100Nominal Ø
DNExternal Ø
øDImperial(inches)
3638405055687080
100110115156174203254
222222303035353540404040505050
1923273542505768788499
124149180233
--�������------
For pipes
M6M6M6M8M8M8M8M8M8M8
M10M10M10M12M14
5,15/5,305,15/5,305,15/5,307,05/7,207,05/7,207,05/7,207,05/7,207,05/7,207,05/7,207,05/7,208,80/8,958,80/8,958,80/8,95
10,60/10,8012,40/12,70
EIMStainless steel U bolt
For holding tubes/pipes
ØD
A
B
C
Ød
- Drawn steel wire, tolerance h9,overall tolerance 10
- 2 hexagonal nuts- Material:
Stainless steel 304
Stock*
*Depending on availability
Stainless steel
284 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
14 max.
S
ØD
7+0-0
9+0-0
Part numberPrice each
1 to 19
9mm hose clamp
- Worm driven 9mm wide pressed solid steel band- Materials:
Steel version: screw: zinc plated steel Qst36-3band/housing: stainless steel 430
Stainless steel version: screw: stainless steel 302band/housing: stainlesssteel 304
.Mounting.* Tightening torque/pressure should never exceed 75%
of maximum shown
.Info..- Not sold
individually, please contact us for details
CS9 Normal use
8-16 23,1 0,6 3,0 4512-22 23,1 0,6 3,0 4516-27 24,6 0,6 3,5 4220-32 24,6 0,6 3,5 3625-40 27,5 0,7 4,0 3230-45 27,5 0,7 4,0 2832-50 27,5 0,7 4,0 2440-60 29,0 0,7 4,0 1950-70 29,0 0,7 4,0 17
8-16 23,1 0,6 3,0 4512-22 23,1 0,6 3,0 4516-27 24,6 0,6 3,5 4220-32 24,6 0,6 3,5 3625-40 27,5 0,7 4,0 3230-45 27,5 0,7 4,0 2832-50 27,5 0,7 4,0 2440-60 29,0 0,7 4,0 1950-70 29,0 0,7 4,0 17
Working rangeØD L
S+/-0,1
Torque(Nm)
Pressure(Bar)
SteelCS9-8-16CS9-12-22CS9-16-27CS9-20-32CS9-25-40CS9-30-45CS9-32-50CS9-40-60CS9-50-70Stainless steelCS9-8-16/SSCS9-12-22/SSCS9-16-27/SSCS9-20-32/SSCS9-25-40/SSCS9-30-45/SSCS9-32-50/SSCS9-40-60/SSCS9-50-70/SS
0,55 F
0,58 F
0,61 F
0,64 F
0,70 F
0,77 F
0,83 F
0,87 F
1,13 F
1,26 F
1,38 F
1,45 F
1,55 F
1,65 F
1,81 F
1,97 F
2,03 F
2,30 F*For 5 fold safety
L
Max value*
11 max.
20+-5%
40+-10%
60+-15%
100+-20%
150+On request
1+List
Qty.Disc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2851HPC*For 5 fold safety
20+-5%
40+-10%
60+-15%
100+-20%
150+On request
1+List
DISCOUNTS
13mm hose clampCS13
13+0-0
Part numberPrice each
1 to 19
Normal use
Working rangeØD L
Torque(Nm)
Pressure(Bar)
SteelCS13-20-32CS13-25-40CS13-30-45CS13-32-50CS13-40-60CS13-50-70CS13-60-80CS13-70-90CS13-80-100CS13-90-110CS13-100-120CS13-110-130CS13-120-140Stainless steelCS13-20-32/SSCS13-25-40/SSCS13-30-45/SSCS13-32-50/SSCS13-40-60/SSCS13-50-70/SSCS13-60-80/SSCS13-70-90/SSCS13-80-100/SSCS13-90-110/SSCS13-100-120/SSCS13-110-130/SSCS13-120-140/SS
0,87 F
0,90 F
0,96 F
0,96 F
1,10 F
1,13 F
1,38 F
1,48 F
1,62 F
1,71 F
1,81 F
1,84 F
1,97 F
2,24 F
2,42 F
2,63 F
2,66 F
2,75 F
2,95 F
3,24 F
3,40 F
3,52 F
3,79 F
4,11 F
4,17 F
4,38 F
19 max.
ØD
1mm
- Worm driven 13mm wide pressed solid steel band- Materials:
Steel version: screw: zinc plated steel Qst36-3band/housing: galvanised steel St3430
Stainless steel version: screw: stainless steel 302band/housing: stainless steel 304
.Mounting.* Tightening torque/pressure should never exceed 75%
of maximum shown
.Info..- Not sold
individually, please contact us for details
20-32 31 5,0 4525-40 31 5,0 4030-45 31 5,0 3832-50 31 5,0 3540-60 31 5,0 3050-70 35 5,5 2560-80 35 5,5 2070-90 35 5,5 1780-100 35 5,5 1490-110 35 5,5 12
100-120 35 5,5 10110-130 35 5,5 8120-140 35 5,5 7
20-32 31 5,0 4525-40 31 5,0 4030-45 31 5,0 3832-50 31 5,0 3540-60 31 5,0 3050-70 35 5,5 2560-80 35 5,5 2070-90 35 5,5 1780-100 35 5,5 1490-110 35 5,5 12
100-120 35 5,5 10110-130 35 5,5 8120-140 35 5,5 7
Max value*
11,5 max.
L
Qty.Disc.
286 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
B
A
ØD
Part numberPrice each
1 to 19
Heavy duty hose clip
- Materials:screw: steel 8.8band/housing: mild steelFinish: Chromed zinc
.Info..- Not sold individually,
please contact us for details
CSH For heavy duty applications
17-19 M6 18 19,8 0,6 45 4820-22 M6 18 19,8 0,6 45 4823-25 M6 18 19,8 0,6 45 4526-28 M6 18 19,8 0,6 45 4529-31 M6 20 22,0 0,8 80 4232-35 M6 20 22,0 0,8 80 4236-39 M6 20 22,0 0,8 80 4040-43 M6 20 22,0 0,8 80 4044-47 M6 22 24,5 1,2 160 4448-51 M6 22 24,5 1,2 160 4452-55 M6 22 24,5 1,2 160 4056-59 M6 22 24,5 1,2 160 4060-63 M6 22 24,5 1,2 160 3664-67 M6 22 24,5 1,2 160 3668-73 M8 24 26,5 1,5 250 2874-79 M8 24 26,5 1,5 250 2880-85 M8 24 26,5 1,5 250 2886-91 M8 24 26,5 1,5 250 2092-97 M8 24 26,5 1,5 250 20
98-103 M8 24 26,5 1,5 250 20104-112 M8 24 26,5 1,5 250 12113-121 M8 24 26,5 1,5 250 12122-130 M8 24 26,5 1,5 250 12131-139 M10 26 29,0 1,7 500 9140-148 M10 26 29,0 1,7 500 9149-161 M10 26 29,0 1,7 500 9
Working rangeØD
FThread A B S
Torque(daNcm)
Pressure(Bar)
CSH18-17-19CSH18-20-22CSH18-23-25CSH18-26-28CSH20-29-31CSH20-32-35CSH20-36-39CSH20-40-43CSH22-44-47CSH22-48-51CSH22-52-55CSH22-56-59CSH22-60-63CSH22-64-67CSH24-68-73CSH24-74-79CSH24-80-85CSH24-86-91CSH24-92-97CSH24-98-103CSH24-104-112CSH24-113-121CSH24-122-130CSH26-131-139CSH26-140-148CSH26-149-161
0,99 F
1,02 F
1,02 F
1,06 F
1,19 F
1,23 F
1,26 F
1,26 F
1,68 F
1,71 F
1,77 F
1,84 F
1,91 F
1,94 F
2,42 F
2,45 F
2,52 F
2,59 F
2,66 F
2,69 F
3,34 F
3,43 F
3,49 F
4,21 F
4,27 F
4,53 F
S
R
F
Max value*
20+-5%
40+-10%
60+-15%
100+-20%
150+On request
1+List
Qty.Disc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2871HPC
Stainless steel heavy duty hose clipCSHSS
- Material: Stainless steel AISI 304
.Info..- Not sold individually,
please contact us for details
A
ØD
ØM
Part numberPrice each
1 to 1934-37 M7 10 22,0 22,0 16 4637-40 M7 11 22,0 22,0 16 4440-43 M7 12 22,0 22,0 16 4443-47 M7 13 22,0 22,0 16 4447-51 M7 14 22,0 22,0 16 4451-55 M7 15 22,0 22,0 16 4055-59 M7 16 22,0 22,0 16 4059-63 M7 17 22,0 22,0 16 3663-68 M7 18 22,0 22,0 16 3668-73 M8 13 27,5 27,5 25 2873-79 M8 14 27,5 27,5 25 2879-85 M8 15 27,5 27,5 25 2085-91 M8 16 27,5 27,5 25 2091-97 M8 17 27,5 27,5 25 2097-104 M8 18 27,5 27,5 25 20104-112 M8 19 27,5 27,5 25 12112-121 M8 20 27,5 27,5 25 12
Working rangeØD ØM E BA
Torque(daNcm)
Pressure(Bar)
CSH20-34-37/SSCSH20-37-40/SSCSH20-40-43/SSCSH20-43-47/SSCSH20-47-51/SSCSH20-51-55/SSCSH20-55-59/SSCSH20-59-63/SSCSH20-63-68/SSCSH25-68-73/SSCSH25-73-79/SSCSH25-79-85/SSCSH25-85-91/SSCSH25-91-97/SSCSH25-97-104/SSCSH25-104-112/SSCSH25-112-121/SS
4,70 F
4,83 F
4,89 F
6,19 F
6,28 F
6,39 F
6,49 F
6,64 F
6,94 F
9,24 F
9,66 F
9,86 F
9,95 F
10,12 F
10,37 F
11,44 F
11,83 F
B
Max value*
+0,3-+0,3-+0,3-+0,3-+0,3-+0,3-+0,3-+0,3-+0,3-+0,4-+0,4-+0,4-+0,4-+0,4-+0,4-+0,4-+0,4-
20+-5%
40+-10%
60+-15%
100+-20%
150+On request
1+List
Qty.Disc.
DISCOUNTS
For heavy duty applications
E
288 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Part numberPrice each
1 to 193/8” 9,5 0,64 30,51/2” 12,7 0,75 30,55/8” 16,0 0,75 30,53/4” 19,0 0,75 30,5
ins mmThickness
mmLength
mmFE30-3/8FE30-1/2FE30-5/8FE30-3/4
52,80 F
66,85 F
84,90 F
95,04 F
Band width
Band 30.5m long
Part numberPrice each
1 to 193/8” 9,5 0,4 501/2” 12,7 0,4 505/8” 16,0 0,4 503/4” 19,0 0,4 50
ins mmThickness
mmLength
mmFE50-3/8FE50-1/2FE50-5/8FE50-3/4
62,29 F
76,02 F
93,45 F
105,61 F
Band width
Band 50m long
Part numberPrice each
1 to 193/8” 9,51/2” 12,75/8” 16,03/4” 19,0
ins mmFEB-3/8FEB-1/2FEB-5/8FEB-3/4
0,41 F
0,45 F
0,62 F
0,73 F
Band width
Buckle
Stainless steel band
20+-5%
60+On request
1+List
Qty.Disc.
DISCOUNTS
- Band for hose collar to be itself realized- Material:
Stainless steel AISI304 (Band and buckles)
.Info..- Clips not sold individually,
please contact us for details
FE
40+-10%
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2891HPC
Steel StainlessW
(h9)H
(h11)L
(mm) Steel Stainless Steel StainlessPart number Price each 1 to 5Stock* Stock*
*Depending on availability
KeysteelSteel or 316 stainless steel KS
KSSS
H
WL
- To be cut to desired length- Conforms to BS 4235 Part 1 1967- Materials:
Steel C45Stainless steel 316
1+List
6+-15%
20+-20%
40+On request
Qty.Disc.
DISCOUNTS
KS-2 - 2 2 300 � - 2,54 F -KS-3 - 3 3 300 � - 2,54 F -KS-4 - 4 4 300 � - 2,95 F -KS-5 KS-5SS 5 5 300 � � 3,84 F 10,22 F
KS-6 KS-6SS 6 6 300 � � 4,23 F 12,94 F
KS-8 - 8 8 300 � - 3,45 F -KS-87 KS-87SS 8 7 300 � � 3,45 F 27,54 F
KS-10 - 10 10 300 � - 4,62 F -KS-108 KS-108SS 10 8 300 � � 4,23 F 44,06 F
KS-12 - 12 12 300 � - 6,47 F -KS-128 KS-128SS 12 8 300 � � 5,11 F 52,42 F
KS-14 - 14 14 300 � - 7,23 F -KS-149 KS-149SS 14 9 300 � - 6,84 F 51,19 F
KS-1610 KS-1610SS 16 10 300 � - 6,84 F 72,75 F
KS-1811 KS-1811SS 18 11 300 - - 7,73 F 61,01 F
KS-2012 - 20 12 300 � - 10,34 F -KS-2214 KS-2214SS 22 14 300 � - 12,46 F 113,23 F
KS-2514 - 25 14 300 � - 12,93 F -
290 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Rounded end feather key DIN 6885SteelKK
- Mechanical interlock- Type A (2 round ends)- Keyway required in associated parts - Material: Steel C45- Not sold individually, please
contact us for details
.Options.- Also exists in stainless steel (316)
and imperial sizes
H h11
L+0,00- 0,25
W h9
6+-15%
20+-45%
50+-55%
100+-65%
200+-70%
500+On request
1+List
Qty.Disc.
DISCOUNTS
Part numberW
(h9)H
(h11) LPrice each1 to 5 Part number
W(h9)
H(h11) L
Price each1 to 5
KK6-18 6 6 18 � 0,50 F
KK6-20 6 6 20 � 0,50 F
KK6-25 6 6 25 � 0,50 F
KK6-28 6 6 28 � 0,50 F
KK6-30 6 6 30 � 0,50 F
KK6-32 6 6 32 � 0,50 F
KK6-36 6 6 36 � 0,53 F
KK6-45 6 6 45 � 0,66 F
KK6-50 6 6 50 � 0,61 F
KK8-7-18 8 7 18 � 0,66 F
KK8-7-20 8 7 20 � 0,66 F
KK8-7-22 8 7 22 � 0,66 F
KK8-7-25 8 7 25 � 0,68 F
KK8-7-30 8 7 30 � 0,66 F
KK8-7-40 8 7 40 � 0,76 F
KK8-7-45 8 7 45 � 1,51 F
KK8-7-50 8 7 50 � 0,82 F
KK10-8-20 10 8 20 � 0,81 F
KK10-8-28 10 8 28 � 0,81 F
KK10-8-30 10 8 30 � 0,94 F
KK10-8-36 10 8 36 � 0,94 F
KK10-8-40 10 8 40 � 0,94 F
KK10-8-45 10 8 45 � 1,09 F
KK10-8-50 10 8 50 � 1,09 F
KK12-8-36 12 8 36 � 1,23 F
KK12-8-40 12 8 40 � 1,23 F
KK12-8-45 12 8 45 � 1,37 F
KK12-8-50 12 8 50 � 1,41 F
KK12-8-56 12 8 56 - 1,51 F
KK12-8-60 12 8 60 � 1,51 F
KK14-9-50 14 9 50 � 1,68 F
KK14-9-70 14 9 70 � 2,35 F
Stock* Stock*
*Depending on availability
KK2-10 2 2 10 � 0,50 F
KK2-14 2 2 14 � 0,50 F
KK2-20 2 2 20 � 0,50 F
KK2-22 2 2 22 � 0,50 F
KK3-8 3 3 8 � 0,38 F
KK3-10 3 3 10 � 0,42 F
KK3-12 3 3 12 � 0,38 F
KK3-15 3 3 15 � 0,38 F
KK3-20 3 3 20 � 0,39 F
KK3-30 3 3 30 � 0,38 F
KK3-40 3 3 40 � 0,38 F
KK4-8 4 4 8 � 0,38 F
KK4-10 4 4 10 � 0,38 F
KK4-12 4 4 12 � 0,38 F
KK4-15 4 4 15 � 0,38 F
KK4-16 4 4 16 � 0,38 F
KK4-20 4 4 20 � 0,38 F
KK4-25 4 4 25 � 0,39 F
KK5-10 5 5 10 � 0,38 F
KK5-12 5 5 12 � 0,38 F
KK5-14 5 5 14 � 0,38 F
KK5-16 5 5 16 � 0,38 F
KK5-18 5 5 18 � 0,38 F
KK5-20 5 5 20 � 0,40 F
KK5-25 5 5 25 � 0,38 F
KK5-30 5 5 30 � 0,42 F
KK5-35 5 5 35 � 0,50 F
KK5-40 5 5 40 � 0,50 F
KK5-50 5 5 50 � 0,46 F
KK6-12 6 6 12 � 0,50 F
KK6-14 6 6 14 � 0,50 F
KK6-16 6 6 16 � 0,50 F
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2911HPC
Rounded end feather key DIN 6885Stainless steel 316 Ti KKSS
stainless steel
Widthw
Keyway
DepthP
Width w
DepthP
6+-15%
20+-45%
50+-55%
100+-65%
200+-70%
500+On request
1+List
Qty.Disc.
DISCOUNTS
Bore or shaftdiameter Keyway (mm)
W h p2 1,07 1,253 1,50 1,854 1,86 2,555 2,35 3,056 2,83 3,558 3,34 4,1010 3,34 5,1012 3,35 5,1014 3,80 5,50
from Ø to Ø (inclusive)Ø6 - Ø8Ø8 - Ø10
Ø10 - Ø12Ø12 - Ø17Ø17 - Ø22Ø22 - Ø30Ø30 - Ø38Ø38 - Ø44Ø44 - Ø50
Designer’s Note
- Mechanical interlock- Type A (2 round ends)- Keyway required in associated parts - Material: Key steel XC48 60 daN/mm2 - Not sold individually, please contact us for details
Part numberWidthW (h9)
HeightH (h11)
LengthL
Price each1 to 5 partsStock*
*Depending on availability
H h11
L+0,00- 0,25
W h9
KK2-20SS 2 2 20 � 3,42 F
KK3-10SS 3 3 10 � 1,23 F
KK3-20SS 3 3 20 � 1,34 F
KK4-10SS 4 4 10 � 1,48 F
KK4-12SS 4 4 12 � 0,94 F
KK4-18SS 4 4 18 � 1,52 F
KK4-20SS 4 4 20 � 1,64 F
KK4-25SS 4 4 25 � 1,72 F
KK5-10SS 5 5 10 � 1,59 F
KK5-20SS 5 5 20 � 1,88 F
KK5-25SS 5 5 25 � 2,00 F
KK5-30SS 5 5 30 � 2,27 F
KK6-10SS 6 6 10 � 1,88 F
KK6-20SS 6 6 20 � 2,26 F
KK6-25SS 6 6 25 � 2,52 F
KK6-30SS 6 6 30 � 2,90 F
KK8-7-20SS 8 7 20 � 3,03 F
KK8-7-25SS 8 7 25 � 3,42 F
KK8-7-30SS 8 7 30 � 3,92 F
KK8-7-35SS 8 7 35 � 4,27 F
KK10-8-20SS 10 8 20 � 4,06 F
KK10-8-25SS 10 8 25 � 4,70 F
KK10-8-30SS 10 8 30 � 5,47 F
KK10-8-35SS 10 8 35 � 5,98 F
KK12-8-20SS 12 8 20 - 6,53 F
KK12-8-25SS 12 8 25 - 6,49 F
KK12-8-30SS 12 8 30 � 6,53 F
KK12-8-35SS 12 8 35 � 7,01 F
292 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Part number
CX-4S/BCX-5S/BCX-6S/BCX-7S/BCX-8S/BCX-9S/BCX-10S/BCX-12S/BCX-14S/BCX-15S/BCX-16S/BCX-17S/BCX-18S/BCX-20S/BCX-22S/BCX-24S/BCX-25S/BCX-26S/BCX-30S/BCX-35S/B
456789
1012141516171820222425263035
0,400,600,700,800,801,001,001,001,001,001,001,001,201,201,201,201,201,201,501,50
3,804,805,706,707,608,609,60
11,5013,4014,3015,2016,2017,0019,0021,0022,9023,9024,9028,6033,00
0,500,700,800,900,901,101,101,101,101,101,101,101,301,301,301,301,301,301,601,60
8,6010,3011,7013,5014,7016,0017,0019,0021,4022,6023,8025,0026,2028,4030,8033,2034,2035,5040,6047,00
200200200200200200100100100100100100100100
505050505025
�����-������-�������
Shaft ØCirclipwidth
Groove Ø
Groovewidth
UndercutØ
Qty. perpacket
Price perpacket
19,58 F
22,78 F
22,59 F
25,80 F
29,72 F
33,60 F
17,93 F
20,20 F
28,52 F
30,33 F
33,27 F
39,69 F
53,49 F
60,41 F
35,65 F
38,63 F
40,04 F
49,38 F
70,13 F
59,02 F
*Depending on availability
Stock*
External circlip DIN 471Shaft mounted snap ringCXS
Width ofcirclip
Width ofgroove
Groo
ve Ø Shaft Ø
Undercut Ø
- Flexible ring for preventing axial movementof a shaft
- Special pliers required for mounting- Material: Stainless steel A2- Corrosion resistant- Working temperature: -20°C to +200°C
(Tolerates occasional use at up to 300°C)- Sold by the packet, quantity depends on size
stainless steel
6+-10%
20+-20%
50+On request
1+List
N° packetsDisc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2931HPC
Part number
CY-10S/BCY-11S/BCY-12S/BCY-13S/BCY-14S/BCY-15S/BCY-16S/BCY-18S/BCY-20S/BCY-22S/B
10111213141516182022
1,001,001,001,001,001,001,001,001,001,00
10,4011,4012,5013,6014,6015,7016,8019,0021,0023,00
1,101,101,101,101,101,101,101,101,101,10
3,304,104,905,406,207,208,009,40
11,2013,20
200100100100100100100100100
50
--�---�-��
Bore ØCirclipwidth
Groove Ø
Groovewidth
UndercutØ
Qty. perpacket
Price perpacket
47,52 F
51,59 F
26,74 F
28,52 F
29,72 F
30,90 F
32,46 F
35,65 F
39,81 F
24,65 F
*Depending on availability
Stock*
Internal circlip DIN 472Bore mounted snap ring CYS
- Flexible ring for preventing axial movementof a bored component
- Special pliers required for mounting- Material: Stainless steel A2- Corrosion resistant- Working temperature: -20°C to +200°C
(Tolerates occasional use at up to 300°C)- Sold by the packet, quantity depends on size
Width ofcirclip
Groove width
Ø Undercut
Bore ØG
roov
e Ø
stainless steel
6+-10%
20+-20%
50+On request
1+List
N° packetsDisc.
DISCOUNTS
294 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Part number ØNom. Min. Ø Max. Ø L ØB C Min. Max.Qty. perpacket
Price perpacket
Chamfer Hole Ø
EP1,5-6/B 1,5 1,62 1,73 6 1,40 0,50 1,50 1,60 100 � 8,02 F
EP1,5-8/B 1,5 1,62 1,73 8 1,40 0,50 1,50 1,60 100 � 8,02 F
EP1,5-10/B 1,5 1,62 1,73 10 1,40 0,50 1,50 1,60 100 � 8,25 F
EP1,5-12/B 1,5 1,62 1,73 12 1,40 0,50 1,50 1,60 100 - 8,49 F
EP1,5-14/B 1,5 1,62 1,73 14 1,40 0,50 1,50 1,60 100 � 8,58 F
EP1,5-16/B 1,5 1,62 1,73 16 1,40 0,50 1,50 1,60 100 � 8,49 F
EP1,5-20/B 1,5 1,62 1,73 20 1,40 0,50 1,50 1,60 100 - 10,52 F
EP2-6/B 2,0 2,13 2,25 6 1,90 0,70 1,99 2,10 100 � 8,73 F
EP2-8/B 2,0 2,13 2,25 8 1,90 0,70 1,99 2,10 100 � 8,90 F
EP2-10/B 2,0 2,13 2,25 10 1,90 0,70 1,99 2,10 100 � 9,17 F
EP2-12/B 2,0 2,13 2,25 12 1,90 0,70 1,99 2,10 100 - 7,60 F
EP2-14/B 2,0 2,13 2,25 14 1,90 0,70 1,99 2,10 100 � 11,19 F
EP2-16/B 2,0 2,13 2,25 16 1,90 0,70 1,99 2,10 100 � 7,76 F
EP2-18/B 2,0 2,13 2,25 18 1,90 0,70 1,99 2,10 100 - 10,02 F
EP2-20/B 2,0 2,13 2,25 20 1,90 0,70 1,99 2,10 100 � 10,20 F*Depending on availability
Stock*
Coiled spring pin ISO 8750
Ød1
ØD
C
ØDL
ØB ØD
Stainless steel A2EP
- For fastening two associated parts- Stress spread uniformly across width- Absorbs shocks and vibrations- For information on shear strength, please see
technical information- Material: stainless steel A2 - Sold by the packet, quantity depends on size
.Uses.- The selection of a spring pin is based on a
number of factors: - The shearing force to be handled- The rigidity required for the final assembly- The strength required under both variable and
vibrating loads- Low cost and easy assembly mechanism, an
alternative to using dowel pins- Reliable transmission of high forces- High wear resistance- Can be used as a safety mechanism
.Assembly.- Before assembly Ød1 will be greater than the
hole bore
stainless steel
5+-10%
10+-20%
21+On request
1+List
DISCOUNTSN°
packets
ØD expanded
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2951HPC
EP
EP2,5-8/B 2,5 2,65 2,78 8 2,40 0,70 2,49 2,60 100 - 9,95 F
EP2,5-10/B 2,5 2,65 2,78 10 2,40 0,70 2,49 2,60 100 - 10,31 F
EP2,5-12/B 2,5 2,65 2,78 12 2,40 0,70 2,49 2,60 100 - 10,02 F
EP2,5-14/B 2,5 2,65 2,78 14 2,40 0,70 2,49 2,60 100 - 10,37 F
EP2,5-16/B 2,5 2,65 2,78 16 2,40 0,70 2,49 2,60 100 - 11,09 F
EP2,5-18/B 2,5 2,65 2,78 18 2,40 0,70 2,49 2,60 100 - 11,34 F
EP2,5-20/B 2,5 2,65 2,78 20 2,40 0,70 2,49 2,60 100 - 11,24 F
EP2,5-22/B 2,5 2,65 2,78 22 2,40 0,70 2,49 2,60 100 - 11,91 F
EP2,5-24/B 2,5 2,65 2,78 24 2,40 0,70 2,49 2,60 100 - 12,21 F
EP3-6/B 3,0 3,15 3,30 6 2,90 0,90 2,99 3,10 100 - 12,51 F
EP3-10/B 3,0 3,15 3,30 10 2,90 0,90 2,99 3,10 100 � 11,24 F
EP3-12/B 3,0 3,15 3,30 12 2,90 0,90 2,99 3,10 100 - 14,56 F
EP3-14/B 3,0 3,15 3,30 14 2,90 0,90 2,99 3,10 100 - 11,39 F
EP3-16/B 3,0 3,15 3,30 16 2,90 0,90 2,99 3,10 100 � 16,04 F
EP3-18/B 3,0 3,15 3,30 18 2,90 0,90 2,99 3,10 100 - 17,07 F
EP3-20/B 3,0 3,15 3,30 20 2,90 0,90 2,99 3,10 100 � 17,14 F
EP3-22/B 3,0 3,15 3,30 22 2,90 0,90 2,99 3,10 100 - 18,09 F
EP3-24/B 3,0 3,15 3,30 24 2,90 0,90 2,99 3,10 100 � 18,69 F
EP3-26/B 3,0 3,15 3,30 26 2,90 0,90 2,99 3,10 100 - 14,44 F
EP3-28/B 3,0 3,15 3,30 28 2,90 0,90 2,99 3,10 100 � 20,24 F
EP3-30/B 3,0 3,15 3,30 30 2,90 0,90 2,99 3,10 100 - 20,96 F
EP3-35/B 3,0 3,15 3,30 35 2,90 0,90 2,99 3,10 100 - 24,37 F
EP3-40/B 3,0 3,15 3,30 40 2,90 0,90 2,99 3,10 100 � 28,76 F
EP3,5-12/B 3,5 3,67 3,84 12 3,40 1,00 3,48 3,62 100 - 19,52 F
EP3,5-18/B 3,5 3,67 3,84 18 3,40 1,00 3,48 3,62 100 - 23,32 F
EP3,5-20/B 3,5 3,67 3,84 20 3,40 1,00 3,48 3,62 100 - 22,52 F
EP3,5-24/B 3,5 3,67 3,84 24 3,40 1,00 3,48 3,62 100 - 25,03 F
EP3,5-28/B 3,5 3,67 3,84 28 3,40 1,00 3,48 3,62 100 - 25,72 F
EP3,5-30/B 3,5 3,67 3,84 30 3,40 1,00 3,48 3,62 100 - 27,80 F
EP4-12/B 4,0 4,20 4,40 12 3,90 1,10 3,98 4,12 50 � 11,87 F
EP4-14/B 4,0 4,20 4,40 14 3,90 1,10 3,98 4,12 50 - 11,66 F
EP4-16/B 4,0 4,20 4,40 16 3,90 1,10 3,98 4,12 50 - 12,51 F
EP4-18/B 4,0 4,20 4,40 18 3,90 1,10 3,98 4,12 50 - 12,47 F
EP4-20/B 4,0 4,20 4,40 20 3,90 1,10 3,98 4,12 50 � 10,59 F
EP4-22/B 4,0 4,20 4,40 22 3,90 1,10 3,98 4,12 50 - 14,04 F
EP4-24/B 4,0 4,20 4,40 24 3,90 1,10 3,98 4,12 50 - 13,99 F
EP4-26/B 4,0 4,20 4,40 26 3,90 1,10 3,98 4,12 50 � 14,47 F
EP4-28/B 4,0 4,20 4,40 28 3,90 1,10 3,98 4,12 50 - 14,98 F
EP4-30/B 4,0 4,20 4,40 30 3,90 1,10 3,98 4,12 50 � 15,43 F
EP4-35/B 4,0 4,20 4,40 35 3,90 1,10 3,98 4,12 50 � 16,66 F
EP4-40/B 4,0 4,20 4,40 40 3,90 1,10 3,98 4,12 50 - 18,72 F
EP4-50/B 4,0 4,20 4,40 50 3,90 1,10 3,98 4,12 25 - 12,08 F
Part number ØNom. Min. Ø Max. Ø L ØB C Min. Max.Qty. perpacket
Price perpacket
Chamfer Hole ØStock*
*Depending on availability
ØD expanded
296 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Coiled spring pin ISO 8750Stainless steel A2EP
Ød1
ØD
C
ØDL
ØB ØD
- For fastening two associated parts- Stress spread uniformly across width- Absorbs shocks and vibrations- For information on shear strength, please see
technical information- Material: stainless steel A2- Sold by packet, quantity depends on size
.Uses.- The selection of a spring pin is based on a
number of factors:- The shearing force to be handled- The rigidity required for the final assembly- The strength required under both variable and
vibrating loads- Low cost and easy assembly mechanism, an
alternative to using dowel pins- Reliable transmission of high forces- High wear resistance- Can be used as a safety mechanism
.Assembly.- Before assembly Ød1 will be greater than the
hole bore
stainless steel
5+-10%
10+-20%
21+On request
1+List
DISCOUNTSN°
packets
Part number ØNom. Min. Ø Max. Ø L ØB C Min. Max.Qty. perpacket
Price perpacket
Chamfer Hole Ø
*Depending on availability
EP5-14/B 5,0 5,25 5,50 14 4,85 1,30 4,95 5,12 25 � 8,99 F
EP5-16/B 5,0 5,25 5,50 16 4,85 1,30 4,95 5,12 25 - 9,63 F
EP5-18/B 5,0 5,25 5,50 18 4,85 1,30 4,95 5,12 25 � 10,79 F
EP5-20/B 5,0 5,25 5,50 20 4,85 1,30 4,95 5,12 25 � 11,24 F
EP5-22/B 5,0 5,25 5,50 22 4,85 1,30 4,95 5,12 25 - 11,66 F
EP5-24/B 5,0 5,25 5,50 24 4,85 1,30 4,95 5,12 25 - 11,22 F
EP5-26/B 5,0 5,25 5,50 26 4,85 1,30 4,95 5,12 25 - 11,61 F
EP5-30/B 5,0 5,25 5,50 30 4,85 1,30 4,95 5,12 25 � 13,37 F
EP5-35/B 5,0 5,25 5,50 35 4,85 1,30 4,95 5,12 25 - 14,44 F
EP5-40/B 5,0 5,25 5,50 40 4,85 1,30 4,95 5,12 25 � 14,27 F
EP5-45/B 5,0 5,25 5,50 45 4,85 1,30 4,95 5,12 25 - 14,13 F
EP5-50/B 5,0 5,25 5,50 50 4,85 1,30 4,95 5,12 25 - 20,06 F
EP6-16/B 6,0 6,25 6,50 16 5,85 1,50 5,95 6,13 25 - 14,37 F
EP6-18/B 6,0 6,25 6,50 18 5,85 1,50 5,95 6,13 25 - 15,43 F
EP6-20/B 6,0 6,25 6,50 20 5,85 1,50 5,95 6,13 25 � 12,74 F
EP6-22/B 6,0 6,25 6,50 22 5,85 1,50 5,95 6,13 25 - 14,56 F
ØD expanded
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2971HPC
EP
EP6-24/B 6,0 6,25 6,50 24 5,85 1,50 5,95 6,13 25 - 15,03 F
EP6-26/B 6,0 6,25 6,50 26 5,85 1,50 5,95 6,13 25 - 15,47 F
EP6-28/B 6,0 6,25 6,50 28 5,85 1,50 5,95 6,13 25 - 16,23 F
EP6-30/B 6,0 6,25 6,50 30 5,85 1,50 5,95 6,13 10 � 9,20 F
EP6-35/B 6,0 6,25 6,50 35 5,85 1,50 5,95 6,13 10 - 8,71 F
EP6-40/B 6,0 6,25 6,50 40 5,85 1,50 5,95 6,13 10 � 10,54 F
EP6-45/B 6,0 6,25 6,50 45 5,85 1,50 5,95 6,13 10 - 11,03 F
EP6-50/B 6,0 6,25 6,50 50 5,85 1,50 5,95 6,13 10 � 11,64 F
EP6-55/B 6,0 6,25 6,50 55 5,85 1,50 5,95 6,13 10 - 11,03 F
EP6-60/B 6,0 6,25 6,50 60 5,85 1,50 5,95 6,13 10 - 11,93 F
EP8-20/B 8,0 8,30 8,63 20 7,80 2,00 7,93 8,17 10 - 10,07 F
EP8-24/B 8,0 8,30 8,63 24 7,80 2,00 7,93 8,17 10 - 10,91 F
EP8-26/B 8,0 8,30 8,63 26 7,80 2,00 7,93 8,17 10 - 11,52 F
EP8-28/B 8,0 8,30 8,63 28 7,80 2,00 7,93 8,17 10 - 15,51 F
EP8-30/B 8,0 8,30 8,63 30 7,80 2,00 7,93 8,17 10 - 12,68 F
EP8-40/B 8,0 8,30 8,63 40 7,80 2,00 7,93 8,17 10 - 15,47 F
EP8-45/B 8,0 8,30 8,63 45 7,80 2,00 7,93 8,17 10 - 16,87 F
EP8-50/B 8,0 8,30 8,63 50 7,80 2,00 7,93 8,17 10 - 18,25 F
EP8-55/B 8,0 8,30 8,63 55 7,80 2,00 7,93 8,17 10 - 26,77 F
EP8-60/B 8,0 8,30 8,63 60 7,80 2,00 7,93 8,17 10 - 21,13 F
EP8-65/B 8,0 8,30 8,63 65 7,80 2,00 7,93 8,17 10 - 23,04 F
EP8-70/B 8,0 8,30 8,63 70 7,80 2,00 7,93 8,17 10 - 32,66 F
EP8-75/B 8,0 8,30 8,63 75 7,80 2,00 7,93 8,17 10 - 25,31 F
EP10-24/B 10,0 10,35 10,80 24 9,75 2,50 9,93 10,20 10 - 15,25 F
EP10-26/B 10,0 10,35 10,80 26 9,75 2,50 9,93 10,20 10 - 16,87 F
EP10-30/B 10,0 10,35 10,80 30 9,75 2,50 9,93 10,20 10 � 18,87 F
EP10-40/B 10,0 10,35 10,80 40 9,75 2,50 9,93 10,20 10 - 23,92 F
EP10-45/B 10,0 10,35 10,80 45 9,75 2,50 9,93 10,20 10 - 25,44 F
EP10-50/B 10,0 10,35 10,80 50 9,75 2,50 9,93 10,20 10 - 27,63 F
EP10-55/B 10,0 10,35 10,80 55 9,75 2,50 9,93 10,20 10 - 30,23 F
EP10-60/B 10,0 10,35 10,80 60 9,75 2,50 9,93 10,20 10 - 32,59 F
EP10-65/B 10,0 10,35 10,80 65 9,75 2,50 9,93 10,20 10 - 37,46 F
EP10-70/B 10,0 10,35 10,80 70 9,75 2,50 9,93 10,20 10 - 39,01 F
EP10-75/B 10,0 10,35 10,80 75 9,75 2,50 9,93 10,20 10 - 41,51 F
EP10-80/B 10,0 10,35 10,80 80 9,75 2,50 9,93 10,20 10 - 58,35 F
EP10-85/B 10,0 10,35 10,80 85 9,75 2,50 9,93 10,20 10 - 44,63 F
EP12-30/B 12,0 12,40 12,85 30 11,70 3,00 11,90 12,22 10 - 20,02 F
EP12-40/B 12,0 12,40 12,85 40 11,70 3,00 11,90 12,22 10 - 28,17 F
EP12-50/B 12,0 12,40 12,85 50 11,70 3,00 11,90 12,22 10 - 36,37 F
EP12-60/B 12,0 12,40 12,85 60 11,70 3,00 11,90 12,22 10 - 59,09 F
EP12-65/B 12,0 12,40 12,85 65 11,70 3,00 11,90 12,22 10 - 46,68 F
EP12-70/B 12,0 12,40 12,85 70 11,70 3,00 11,90 12,22 10 - 54,22 F
EP12-80/B 12,0 12,40 12,85 80 11,70 3,00 11,90 12,22 10 - 60,95 F
EP12-100/B 12,0 12,40 12,85 100 11,70 3,00 11,90 12,22 10 - 77,32 F
Part number ØNom. Min. Ø Max. Ø L ØB C Min. Max.Qty. perpacket
Price perpacket
Chamfer Hole ØStock*
*Depending on availability
298 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Slotted spring pin ISO 8752Stainless steel 304SRP
- For fastening two associatedparts
- Stress spread uniformly acrosswidth
- Absorbs shocks and vibrations- For information on shear
strength, please see technicalinformation
- Material: stainless steel 304
.Info..- Sold by the packet
SRP1,5-5/B 1,5 1,70 1,80 5 1,40 0,50 1,50 1,60 100 - 9,48 F
SRP1,5-6/B 1,5 1,70 1,80 6 1,40 0,50 1,50 1,60 100 � 7,64 F
SRP1,5-8/B 1,5 1,70 1,80 8 1,40 0,50 1,50 1,60 100 � 8,82 F
SRP1,5-10/B 1,5 1,70 1,80 10 1,40 0,50 1,50 1,60 100 � 8,97 F
SRP1,5-12/B 1,5 1,70 1,80 12 1,40 0,50 1,50 1,60 100 - 7,35 F
SRP1,5-14/B 1,5 1,70 1,80 14 1,40 0,50 1,50 1,60 100 � 9,57 F
SRP1,5-16/B 1,5 1,70 1,80 16 1,40 0,50 1,50 1,60 100 - 10,79 F
SRP1,5-18/B 1,5 1,70 1,80 18 1,40 0,50 1,50 1,60 100 - 10,07 F
SRP1,5-20/B 1,5 1,70 1,80 20 1,40 0,50 1,50 1,60 100 � 11,39 F
SRP2-4/B 2,0 2,30 2,40 4 1,90 0,70 2,00 2,10 100 - 4,95 F
SRP2-5/B 2,0 2,30 2,40 5 1,90 0,70 2,00 2,10 100 � 9,23 F
SRP2-6/B 2,0 2,30 2,40 6 1,90 0,70 2,00 2,10 100 - 9,57 F
SRP2-8/B 2,0 2,30 2,40 8 1,90 0,70 2,00 2,10 100 � 8,25 F
SRP2-10/B 2,0 2,30 2,40 10 1,90 0,70 2,00 2,10 100 � 9,57 F
SRP2-12/B 2,0 2,30 2,40 12 1,90 0,70 2,00 2,10 100 � 8,97 F
SRP2-14/B 2,0 2,30 2,40 14 1,90 0,70 2,00 2,10 100 � 10,20 F
SRP2-16/B 2,0 2,30 2,40 16 1,90 0,70 2,00 2,10 100 � 10,79 F
SRP2-18/B 2,0 2,30 2,40 18 1,90 0,70 2,00 2,10 100 � 11,09 F
SRP2-20/B 2,0 2,30 2,40 20 1,90 0,70 2,00 2,10 100 � 11,39 F
SRP2-22/B 2,0 2,30 2,40 22 1,90 0,70 2,00 2,10 100 - 11,72 F
SRP2-24/B 2,0 2,30 2,40 24 1,90 0,70 2,00 2,10 100 � 13,24 F
SRP2-26/B 2,0 2,30 2,40 26 1,90 0,70 2,00 2,10 100 - 13,77 F
SRP2-30/B 2,0 2,30 2,40 30 1,90 0,70 2,00 2,10 100 � 15,67 F
SRP2,5-6/B 2,5 2,80 2,90 6 2,40 0,70 2,50 2,60 100 - 7,94 F
SRP2,5-8/B 2,5 2,80 2,90 8 2,40 0,70 2,50 2,60 100 � 10,14 F
SRP2,5-10/B 2,5 2,80 2,90 10 2,40 0,70 2,50 2,60 100 � 10,52 F
SRP2,5-12/B 2,5 2,80 2,90 12 2,40 0,70 2,50 2,60 100 - 9,69 F
SRP2,5-14/B 2,5 2,80 2,90 14 2,40 0,70 2,50 2,60 100 - 10,02 F
SRP2,5-16/B 2,5 2,80 2,90 16 2,40 0,70 2,50 2,60 100 � 11,39 F
SRP2,5-18/B 2,5 2,80 2,90 18 2,40 0,70 2,50 2,60 100 - 11,91 F
Part number Nom. Ø Min. Ø Max. Ø L ØB C Min. Max.Qty. perpacket
Price perpacket
Hole Ø Stock*
*Depending on availability
Chamfer
5+-10%
10+-20%
21+On request
1+List
DISCOUNTSN° packets
Disc.
ØD expanded
C
L
ØB ØD
45°
45°
45°
stainless steel
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 2991HPC
SRP2,5-20/B 2,5 2,80 2,78 20 2,40 0,70 2,49 2,60 100 - 12,24 F
SRP2,5-22/B 2,5 2,80 2,78 22 2,40 0,70 2,49 2,60 100 - 12,21 F
SRP2,5-24/B 2,5 2,80 2,78 24 2,40 0,70 2,49 2,60 100 - 14,34 F
SRP2,5-26/B 2,5 2,80 2,78 26 2,40 0,70 2,49 2,60 100 - 14,44 F
SRP2,5-30/B 2,5 2,80 2,78 30 2,40 0,70 2,49 2,60 100 � 13,95 F
SRP3-5/B 3,0 3,30 3,30 5 2,90 0,90 3,00 3,10 100 - 11,99 F
SRP3-6/B 3,0 3,30 3,30 6 2,90 0,90 3,00 3,10 100 - 10,20 F
SRP3-8/B 3,0 3,30 3,30 8 2,90 0,90 3,00 3,10 100 � 9,57 F
SRP3-10/B 3,0 3,30 3,30 10 2,90 0,90 3,00 3,10 100 � 10,79 F
SRP3-12/B 3,0 3,30 3,30 12 2,90 0,90 3,00 3,10 100 � 10,20 F
SRP3-14/B 3,0 3,30 3,30 14 2,90 0,90 3,00 3,10 100 � 11,91 F
SRP3-16/B 3,0 3,30 3,30 16 2,90 0,90 3,00 3,10 100 � 10,99 F
SRP3-18/B 3,0 3,30 3,30 18 2,90 0,90 3,00 3,10 100 � 12,65 F
SRP3-20/B 3,0 3,30 3,30 20 2,90 0,90 3,00 3,10 100 � 13,10 F
SRP3-22/B 3,0 3,30 3,30 22 2,90 0,90 3,00 3,10 100 - 13,24 F
SRP3-24/B 3,0 3,30 3,30 24 2,90 0,90 3,00 3,10 100 � 15,07 F
SRP3-26/B 3,0 3,30 3,30 26 2,90 0,90 3,00 3,10 100 - 14,34 F
SRP3-28/B 3,0 3,30 3,30 28 2,90 0,90 3,00 3,10 100 - 16,26 F
SRP3-30/B 3,0 3,30 3,30 30 2,90 0,90 3,00 3,10 100 � 15,07 F
SRP3-32/B 3,0 3,30 3,30 32 2,90 0,90 3,00 3,10 100 - 15,53 F
SRP3-35/B 3,0 3,30 3,30 35 2,90 0,90 3,00 3,10 100 - 17,90 F
SRP3-40/B 3,0 3,30 3,30 40 2,90 0,90 3,00 3,10 100 � 18,69 F
SRP4-6/B 4,0 4,40 4,60 6 3,90 1,10 4,00 4,12 100 - 11,39 F
SRP4-8/B 4,0 4,40 4,60 8 3,90 1,10 4,00 4,12 100 - 10,79 F
SRP4-10/B 4,0 4,40 4,60 10 3,90 1,10 4,00 4,12 100 � 14,34 F
SRP4-12/B 4,0 4,40 4,60 12 3,90 1,10 4,00 4,12 100 � 15,07 F
SRP4-14/B 4,0 4,40 4,60 14 3,90 1,10 4,00 4,12 100 - 14,41 F
SRP4-16/B 4,0 4,40 4,60 16 3,90 1,10 4,00 4,12 100 � 15,07 F
SRP4-18/B 4,0 4,40 4,60 18 3,90 1,10 4,00 4,12 100 - 15,67 F
SRP4-20/B 4,0 4,40 4,60 20 3,90 1,10 4,00 4,12 100 � 16,26 F
SRP4-22/B 4,0 4,40 4,60 22 3,90 1,10 4,00 4,12 100 - 16,87 F
SRP4-24/B 4,0 4,40 4,60 24 3,90 1,10 4,00 4,12 100 � 17,49 F
SRP4-26/B 4,0 4,40 4,60 26 3,90 1,10 4,00 4,12 100 - 18,69 F
SRP4-28/B 4,0 4,40 4,60 28 3,90 1,10 4,00 4,12 100 � 21,13 F
SRP4-30/B 4,0 4,40 4,60 30 3,90 1,10 4,00 4,12 100 � 21,72 F
SRP4-35/B 4,0 4,40 4,60 35 3,90 1,10 4,00 4,12 50 - 12,83 F
SRP4-40/B 4,0 4,40 4,60 40 3,90 1,10 4,00 4,12 50 � 13,74 F
SRP4-45/B 4,0 4,40 4,60 45 3,90 1,10 4,00 4,12 50 � 14,68 F
SRP4-50/B 4,0 4,40 4,60 50 3,90 1,10 4,00 4,12 50 � 15,90 F
SRP5-10/B 5,0 5,40 5,60 10 4,85 1,30 5,00 5,12 50 � 8,87 F
SRP5-12/B 5,0 5,40 5,60 12 4,85 1,30 5,00 5,12 50 - 8,60 F
SRP5-14/B 5,0 5,40 5,60 14 4,85 1,30 5,00 5,12 50 - 10,02 F
SRP5-16/B 5,0 5,40 5,60 16 4,85 1,30 5,00 5,12 50 � 9,83 F
SRP5-18/B 5,0 5,40 5,60 18 4,85 1,30 5,00 5,12 50 - 11,03 F
SRP5-20/B 5,0 5,40 5,60 20 4,85 1,30 5,00 5,12 50 � 12,56 F
SRP5-22/B 5,0 5,40 5,60 22 4,85 1,30 5,00 5,12 50 - 11,03 F
SRP5-24/B 5,0 5,40 5,60 24 4,85 1,30 5,00 5,12 50 � 12,74 F
SRP5-26/B 5,0 5,40 5,60 26 4,85 1,30 5,00 5,12 50 - 13,85 F
SRP5-28/B 5,0 5,40 5,60 28 4,85 1,30 5,00 5,12 50 - 13,82 F
SRP5-30/B 5,0 5,40 5,60 30 4,85 1,30 5,00 5,12 50 � 11,64 F
Part number Nom. Ø Min. Ø Max. Ø L ØB C Min. Max.Qty. perpacket
Price perpacket
Chamfer Hole Ø Stock*
*Depending on availability
ØD expanded
300 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Slotted spring pin ISO 8752
SRP5-32/B 5,0 5,40 5,45 32 4,85 1,30 5,00 5,12 50 - 13,45 F
SRP5-35/B 5,0 5,40 5,45 35 4,85 1,30 5,00 5,12 50 � 12,76 F
SRP5-40/B 5,0 5,40 5,45 40 4,85 1,30 5,00 5,12 50 � 17,05 F
SRP5-45/B 5,0 5,40 5,45 45 4,85 1,30 5,00 5,12 50 - 18,30 F
SRP5-50/B 5,0 5,40 5,45 50 4,85 1,30 5,00 5,12 50 � 19,55 F
SRP6-10/B 6,0 6,40 6,70 10 5,85 1,50 6,00 6,12 50 - 11,03 F
SRP6-12/B 6,0 6,40 6,70 12 5,85 1,50 6,00 6,12 50 - 10,11 F
SRP6-14/B 6,0 6,40 6,70 14 5,85 1,50 6,00 6,12 50 - 11,93 F
SRP6-16/B 6,0 6,40 6,70 16 5,85 1,50 6,00 6,12 50 - 12,83 F
SRP6-18/B 6,0 6,40 6,70 18 5,85 1,50 6,00 6,12 50 - 13,74 F
SRP6-20/B 6,0 6,40 6,70 20 5,85 1,50 6,00 6,12 50 � 14,61 F
SRP6-22/B 6,0 6,40 6,70 22 5,85 1,50 6,00 6,12 50 - 15,25 F
SRP6-24/B 6,0 6,40 6,70 24 5,85 1,50 6,00 6,12 50 - 16,17 F
SRP6-26/B 6,0 6,40 6,70 26 5,85 1,50 6,00 6,12 50 - 15,25 F
SRP6-28/B 6,0 6,40 6,70 28 5,85 1,50 6,00 6,12 50 - 17,70 F
SRP6-30/B 6,0 6,40 6,70 30 5,85 1,50 6,00 6,12 50 � 18,60 F
SRP6-32/B 6,0 6,40 6,70 32 5,85 1,50 6,00 6,12 50 - 20,42 F
SRP6-35/B 6,0 6,40 6,70 35 5,85 1,50 6,00 6,12 50 - 20,75 F
SRP6-40/B 6,0 6,40 6,70 40 5,85 1,50 6,00 6,12 50 � 22,87 F
SRP6-45/B 6,0 6,40 6,70 45 5,85 1,50 6,00 6,12 50 - 24,71 F
SRP6-50/B 6,0 6,40 6,70 50 5,85 1,50 6,00 6,12 50 � 26,83 F
SRP8-10/B 8,0 8,50 8,80 10 7,80 2,00 8,00 8,15 50 - 26,52 F
SRP8-16/B 8,0 8,50 8,80 16 7,80 2,00 8,00 8,15 25 - 8,49 F
SRP8-20/B 8,0 8,50 8,80 20 7,80 2,00 8,00 8,15 25 - 10,17 F
SRP8-22/B 8,0 8,50 8,80 22 7,80 2,00 8,00 8,15 25 - 10,79 F
SRP8-24/B 8,0 8,50 8,80 24 7,80 2,00 8,00 8,15 25 - 11,36 F
SRP8-26/B 8,0 8,50 8,80 26 7,80 2,00 8,00 8,15 25 - 11,99 F
SRP8-28/B 8,0 8,50 8,80 28 7,80 2,00 8,00 8,15 25 - 12,61 F
SRP8-30/B 8,0 8,50 8,80 30 7,80 2,00 8,00 8,15 25 � 13,37 F
SRP8-35/B 8,0 8,50 8,80 35 7,80 2,00 8,00 8,15 25 - 14,74 F
SRP8-40/B 8,0 8,50 8,80 40 7,80 2,00 8,00 8,15 10 � 7,97 F
SRP8-50/B 8,0 8,50 8,80 50 7,80 2,00 8,00 8,15 10 � 9,20 F
SRP10-20/B 10,0 10,50 10,80 20 9,75 2,50 10,00 10,15 10 - 10,37 F
SRP10-24/B 10,0 10,50 10,80 24 9,75 2,50 10,00 10,15 10 - 10,87 F
SRP10-26/B 10,0 10,50 10,80 26 9,75 2,50 10,00 10,15 10 - 11,13 F
SRP10-30/B 10,0 10,50 10,80 30 9,75 2,50 10,00 10,15 10 � 11,76 F
SRP10-40/B 10,0 10,50 10,80 40 9,75 2,50 10,00 10,15 10 � 13,33 F
SRP10-50/B 10,0 10,50 10,80 50 9,75 2,50 10,00 10,15 10 � 14,94 F
Part number Nom. Ø Min. Ø Max. Ø L ØB C Min. Max.Qty. perpacket
Price perpacket
Chamfer Hole Ø Stock*
*Depending on availability
C
L
ØB ØD
45°
45°
45°
Stainless steel 304SRP
5+-10%
10+-20%
21+On request
1+List
DISCOUNTSN° packets
Disc.
ØD expanded
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3011HPC
Hardened steel DHDowel pin DIN 6325
ØDm6
LengthL
No. perpacket
DH1-4/BDH1-5/BDH1-6/BDH1-8/BDH1-10/BDH1-12/BDH1,5-5/BDH1,5-6/BDH1,5-8/BDH1,5-10/BDH1,5-12/BDH1,5-14/BDH1,5-16/BDH1,5-18/BDH1,5-20/BDH1,5-22/BDH1,5-24/BDH1,5-26/BDH1,5-28/BDH1,5-30/BDH2-6/BDH2-8/BDH2-10/BDH2-12/BDH2-14/BDH2-16/BDH2-18/BDH2-22/BDH2-24/BDH2-26/BDH2-28/BDH2-30/BDH2-32/B
4568
1012
568
1012141618202224262830
68
1012141618222426283032
100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100
-��----���----�-----��������--��-
100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100
5,20 F
5,20 F
5,20 F
5,80 F
6,00 F
6,19 F
3,83 F
5,20 F
4,34 F
4,53 F
4,81 F
5,20 F
5,61 F
6,40 F
9,12 F
10,79 F
12,50 F
17,11 F
18,63 F
20,51 F
4,34 F
4,59 F
4,79 F
5,05 F
5,39 F
5,70 F
5,90 F
6,71 F
9,55 F
11,68 F
12,50 F
14,90 F
16,09 F
DH2-36/BDH2-40/BDH2,5-6/BDH2,5-8/BDH2,5-10/BDH2,5-12/BDH2,5-14/BDH2,5-16/BDH2,5-18/BDH2,5-20/BDH2,5-22/BDH2,5-24/BDH2,5-26/BDH2,5-28/BDH2,5-30/BDH2,5-32/BDH2,5-36/BDH2,5-40/BDH2,5-45/BDH2,5-50/BDH3-6/BDH3-8/BDH3-10/BDH3-12/BDH3-14/BDH3-16/BDH3-18/BDH3-20/BDH3-22/BDH3-24/BDH3-26/BDH3-28/BDH3-30/B
18,63 F
21,22 F
4,75 F
4,85 F
5,07 F
5,20 F
5,37 F
5,43 F
6,19 F
15,82 F
6,49 F
6,71 F
10,79 F
11,31 F
12,50 F
14,04 F
17,94 F
20,18 F
22,19 F
24,26 F
4,53 F
4,36 F
4,59 F
4,85 F
5,20 F
5,48 F
5,83 F
6,04 F
6,40 F
6,60 F
6,88 F
7,24 F
7,55 F
2,02,02,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,53,03,03,03,03,03,03,03,03,03,03,03,03,0
- For fastening two associated parts- Relative positioning- 15° chamfer- Material: hardened steel 100 Cr6 rectified 58-
60HRc- Conforms to DIN 6325 (ISO 8734)- For information on shear strength, please see
technical information- Sold by the packet 15°
ØD
L
Price perpacket
Partnumber Stock* ØD
m6Length
LNo. perpacket
Price perpacket
Partnumber Stock*
1,01,01,01,01,01,01,51,51,51,51,51,51,51,51,51,51,51,51,51,52,02,02,02,02,02,02,02,02,02,02,02,02,0
3640
68
10121416182022242628303236404550
68
1012141618202224262830
-�������-�-------�--��������-��-�
*Depending on availability
1+List
5+-10%
10+-20%
21+On request
No. packetsDiscounts
DISCOUNTS
302 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Hardened steelDHDowel pin DIN 6325
ØDm6
LengthL
No. perpacket
DH3-32/BDH3-36/BDH3-40/BDH3-45/BDH3-50/BDH3-55/BDH3-60/BDH4-6/BDH4-8/BDH4-10/BDH4-12/BDH4-14/BDH4-16/BDH4-18/BDH4-20/BDH4-22/BDH4-24/BDH4-26/BDH4-28/BDH4-30/BDH4-32/BDH4-36/BDH4-40/BDH4-45/BDH4-50/BDH4-55/BDH4-60/BDH5-8/BDH5-10/BDH5-12/BDH5-14/BDH5-16/BDH5-18/B
32364045505560
68
101214161820222426283032364045505560
81012141618
100100100100100100100100100100100100100100100100100100100100100100100100100100100
252525252525
�-���--������-�-�--�--�-�-������-
252525252525252525252525252525252525252525252525252525252525252525
7,81 F
10,14 F
11,70 F
14,21 F
20,32 F
23,94 F
27,84 F
5,50 F
5,45 F
5,97 F
6,13 F
6,40 F
6,78 F
7,13 F
7,51 F
7,83 F
8,22 F
8,55 F
8,91 F
9,25 F
9,61 F
10,35 F
11,47 F
13,89 F
17,14 F
21,81 F
23,73 F
4,15 F
4,17 F
4,23 F
4,34 F
4,46 F
4,56 F
DH5-20/BDH5-22/BDH5-24/BDH5-26/BDH5-28/BDH5-30/BDH5-32/BDH5-36/BDH5-40/BDH5-45/BDH5-50/BDH5-55/BDH5-60/BDH6-10/BDH6-12/BDH6-14/BDH6-16/BDH6-18/BDH6-20/BDH6-22/BDH6-24/BDH6-26/BDH6-28/BDH6-30/BDH6-32/BDH6-36/BDH6-40/BDH6-45/BDH6-50/BDH6-55/BDH6-60/BDH6-70/BDH6-80/B
4,61 F
4,81 F
4,85 F
5,00 F
5,05 F
5,14 F
5,28 F
5,50 F
5,70 F
6,04 F
6,40 F
7,65 F
8,46 F
4,53 F
4,56 F
4,69 F
4,69 F
4,81 F
5,00 F
5,14 F
5,14 F
5,37 F
5,45 F
5,58 F
5,67 F
5,95 F
6,21 F
6,71 F
7,13 F
7,61 F
8,18 F
12,73 F
17,86 F
5,05,05,05,05,05,05,05,05,05,05,05,05,06,06,06,06,06,06,06,06,06,06,06,06,06,06,06,06,06,06,06,06,0
- For fastening two associated parts- Relative positioning- 15° chamfer- Material: hardened steel 100 Cr6 rectified 58-
60HRc- Conforms to DIN 6325 (ISO 8734)- For information on shear strength, please see
technical information- Sold by the packet 15°
ØD
L
Price perpacket
Partnumber Stock* ØD
m6Length
LNo. perpacket
Price perpacket
Partnumber Stock*
3,03,03,03,03,03,03,04,04,04,04,04,04,04,04,04,04,04,04,04,04,04,04,04,04,04,04,05,05,05,05,05,05,0
202224262830323640455055601012141618202224262830323640455055607080
������-����--����-�-���������-�-�
*Depending on availability
1+List
5+-10%
10+-20%
21+On request
No. packetsDiscounts
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3031HPC
ØDm6
LengthL
No. perpacket
708090
100120
2426283032364045505560708090
100120
2426283032364045505560708090
100120
4045505560708090
100120
2525252525252525252525252525252525252525252525252525252525252525252525252525252525252525252525
---------------------------�-------------------
23,58 F
25,91 F
28,47 F
30,61 F
37,44 F
20,94 F
21,83 F
22,96 F
23,61 F
24,00 F
25,07 F
26,27 F
28,68 F
30,99 F
33,76 F
34,59 F
38,49 F
42,93 F
49,74 F
53,01 F
65,16 F
22,97 F
23,81 F
24,64 F
25,09 F
25,94 F
26,37 F
27,66 F
30,17 F
31,12 F
32,96 F
34,80 F
39,98 F
45,51 F
50,63 F
55,72 F
64,68 F
46,79 F
48,51 F
49,33 F
55,72 F
58,25 F
64,68 F
70,20 F
76,18 F
82,12 F
98,68 F
ØDm6
LengthL
No. perpacket
Price perpacket
Price perpacket
Partnumber
Partnumber
90100
14161820222426283032364045505560708090
100120
20222426283032364045505560708090
100120
20222426283032364045505560
252525252525252525252525252525252525252525252525252525252525252525252525252525252525252525252525252525252525
---�-���--�--�-�-----�-�--�-�---�--�----------�--�----
19,99 F
21,68 F
6,60 F
6,62 F
6,65 F
6,71 F
6,91 F
7,08 F
7,29 F
7,49 F
7,71 F
7,89 F
8,46 F
8,65 F
9,23 F
9,84 F
10,28 F
10,84 F
12,96 F
16,55 F
18,26 F
19,99 F
26,81 F
7,81 F
8,29 F
8,61 F
8,89 F
9,18 F
9,55 F
9,93 F
10,61 F
11,25 F
11,95 F
12,73 F
13,61 F
14,45 F
17,62 F
19,99 F
21,28 F
26,37 F
33,19 F
11,87 F
12,15 F
12,44 F
12,73 F
13,24 F
13,61 F
14,26 F
14,98 F
15,73 F
16,79 F
17,98 F
19,03 F
20,07 F
6,06,08,08,08,08,08,08,08,08,08,08,08,08,08,08,08,08,08,08,08,08,08,010,010,010,010,010,010,010,010,010,010,010,010,010,010,010,010,010,010,012,012,012,012,012,012,012,012,012,012,012,012,012,0
12,012,012,012,012,014,014,014,014,014,014,014,014,014,014,014,014,014,014,014,014,016,016,016,016,016,016,016,016,016,016,016,016,016,016,016,016,020,020,020,020,020,020,020,020,020,020,0
Stock* Stock*
DH6-90/BDH6-100/BDH8-14/BDH8-16/BDH8-18/BDH8-20/BDH8-22/BDH8-24/BDH8-26/BDH8-28/BDH8-30/BDH8-32/BDH8-36/BDH8-40/BDH8-45/BDH8-50/BDH8-55/BDH8-60/BDH8-70/BDH8-80/BDH8-90/BDH8-100/BDH8-120/BDH10-20/BDH10-22/BDH10-24/BDH10-26/BDH10-28/BDH10-30/BDH10-32/BDH10-36/BDH10-40/BDH10-45/BDH10-50/BDH10-55/BDH10-60/BDH10-70/BDH10-80/BDH10-90/BDH10-100/BDH10-120/BDH12-20/BDH12-22/BDH12-24/BDH12-26/BDH12-28/BDH12-30/BDH12-32/BDH12-36/BDH12-40/BDH12-45/BDH12-50/BDH12-55/BDH12-60/B*Depending on availability
DH12-70/BDH12-80/BDH12-90/BDH12-100/BDH12-120/BDH14-24/BDH14-26/BDH14-28/BDH14-30/BDH14-32/BDH14-36/BDH14-40/BDH14-45/BDH14-50/BDH14-55/BDH14-60/BDH14-70/BDH14-80/BDH14-90/BDH14-100/BDH14-120/BDH16-24/BDH16-26/BDH16-28/BDH16-30/BDH16-32/BDH16-36/BDH16-40/BDH16-45/BDH16-50/BDH16-55/BDH16-60/BDH16-70/BDH16-80/BDH16-90/BDH16-100/BDH16-120/BDH20-40/BDH20-45/BDH20-50/BDH20-55/BDH20-60/BDH20-70/BDH20-80/BDH20-90/BDH20-100/BDH20-120/B
304 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Dowel pin ISO 2338
0,120,120,120,120,120,120,150,150,150,150,150,150,230,230,230,230,230,230,230,230,300,300,300,300,300,300,300,300,300,300,300,400,400,40
DP2,5-8/BDP2,5-10/BDP2,5-12/BDP2,5-14/BDP2,5-16/BDP2,5-18/BDP2,5-20/BDP2,5-24/BDP3,0-4/BDP3,0-5/BDP3,0-6/BDP3,0-8/BDP3,0-10/BDP3,0-12/BDP3,0-14/BDP3,0-16/BDP3,0-18/BDP3,0-20/BDP3,0-24/BDP3,0-28/BDP3,0-30/BDP4,0-5/BDP4,0-6/BDP4,0-8/BDP4,0-10/BDP4,0-12/BDP4,0-14/BDP4,0-16/BDP4,0-18/BDP4,0-20/BDP4,0-24/BDP4,0-28/BDP4,0-30/BDP4,0-32/B
810121416182024
4568
101214161820242830
568
10121416182024283032
100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100
���-�-��-����������-�-���������-�-
7,08 F
7,64 F
7,99 F
8,42 F
8,96 F
9,90 F
10,52 F
11,33 F
6,50 F
7,44 F
7,58 F
7,99 F
8,36 F
8,56 F
9,43 F
9,86 F
10,25 F
10,76 F
11,66 F
14,01 F
17,40 F
9,90 F
10,00 F
10,71 F
11,66 F
11,48 F
12,73 F
13,36 F
14,90 F
15,88 F
18,51 F
19,89 F
21,55 F
22,94 F
ØDm6 C
LengthL
Qty perpacket
ØDm6 C
LengthL
Qty perpacket
DP0,8-4/BDP0,8-5/BDP0,8-6/BDP0,8-8/BDP0,8-10/BDP0,8-12/BDP1,0-4/BDP1,0-5/BDP1,0-6/BDP1,0-8/BDP1,0-10/BDP1,0-12/BDP1,5-4/BDP1,5-5/BDP1,5-6/BDP1,5-8/BDP1,5-10/BDP1,5-12/BDP1,5-14/BDP1,5-16/BDP2,0-4/BDP2,0-5/BDP2,0-6/BDP2,0-8/BDP2,0-10/BDP2,0-12/BDP2,0-14/BDP2,0-16/BDP2,0-18/BDP2,0-20/BDP2,0-24/BDP2,5-4/BDP2,5-5/BDP2,5-6/B
4568
1012
4568
1012
4568
10121416
4568
10121416182024
456
100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100
��-��-�-����������-������������-��
4,70 F
4,94 F
5,06 F
5,16 F
5,37 F
5,46 F
4,70 F
4,94 F
5,06 F
5,16 F
5,37 F
5,46 F
5,33 F
5,46 F
5,46 F
5,61 F
5,65 F
5,80 F
6,13 F
6,30 F
5,46 F
5,50 F
5,71 F
5,90 F
6,13 F
6,55 F
6,80 F
7,12 F
7,48 F
8,36 F
9,23 F
6,08 F
6,34 F
6,61 F
0,400,400,400,400,400,400,400,400,450,450,450,450,450,450,450,450,450,450,450,450,450,600,600,600,600,600,600,600,600,600,600,600,600,60
15°
L
C
ØD
- For fastening two associated parts- Relative positioning- Material: stainless steel 303- Sold by the packet
0,80,80,80,80,80,81,01,01,01,01,01,01,51,51,51,51,51,51,51,52,02,02,02,02,02,02,02,02,02,02,02,52,52,5
2,52,52,52,52,52,52,52,53,03,03,03,03,03,03,03,03,03,03,03,03,04,04,04,04,04,04,04,04,04,04,04,04,04,0
Price perpacket
Price perpacket
Partnumber
PartnumberStock* Stock*
*Depending on availability
Stainless steel 303DP
stainless steel
1+List
5+-10%
10+-20%
21+On request
No. packetsDiscounts
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3051HPC
DP4,0-36/BDP4,0-40/BDP4,0-45/BDP4,0-50/BDP5,0-6/BDP5,0-8/BDP5,0-10/BDP5,0-12/BDP5,0-14/BDP5,0-16/BDP5,0-18/BDP5,0-20/BDP5,0-24/BDP5,0-28/BDP5,0-30/BDP5,0-32/BDP5,0-36/BDP5,0-40/BDP5,0-45/BDP5,0-50/BDP5,0-55/BDP5,0-60/BDP6,0-6/BDP6,0-8/BDP6,0-10/BDP6,0-12/BDP6,0-14/BDP6,0-16/BDP6,0-18/BDP6,0-20/BDP6,0-24/BDP6,0-28/BDP6,0-30/BDP6,0-32/BDP6,0-36/BDP6,0-40/BDP6,0-45/BDP6,0-50/BDP6,0-55/BDP6,0-60/BDP8,0-8/BDP8,0-10/BDP8,0-12/BDP8,0-14/BDP8,0-16/BDP8,0-18/BDP8,0-20/BDP8,0-24/BDP8,0-28/BDP8,0-30/BDP8,0-32/BDP8,0-36/BDP8,0-40/BDP8,0-45/BDP8,0-50/B
36404550
68
10121416182024283032364045505560
68
10121416182024283032364045505560
81012141618202428303236404550
100100100100252525252525252525252525252525252525252525252525252525252525252525252525252525252525252525252525252525
-�-�--�������-�--�-�---����������--��--�-�-��-��-�--�-�
24,99 F
27,30 F
29,74 F
35,20 F
3,75 F
4,07 F
4,34 F
4,70 F
5,16 F
5,46 F
5,94 F
6,50 F
7,21 F
7,64 F
7,99 F
8,30 F
9,23 F
10,00 F
10,83 F
12,89 F
14,44 F
17,20 F
9,86 F
7,31 F
5,84 F
6,30 F
6,80 F
7,31 F
7,79 F
8,56 F
9,27 F
10,46 F
11,03 F
11,66 F
12,77 F
13,71 F
17,52 F
19,36 F
20,97 F
23,39 F
10,52 F
5,84 F
6,30 F
11,81 F
12,57 F
13,31 F
14,13 F
15,36 F
16,81 F
17,52 F
18,19 F
19,58 F
21,29 F
23,20 F
25,18 F
DP8,0-55/BDP8,0-60/BDP8,0-70/BDP8,0-80/BDP10,0-10/BDP10,0-12/BDP10,0-14/BDP10,0-16/BDP10,0-18/BDP10,0-20/BDP10,0-24/BDP10,0-28/BDP10,0-30/BDP10,0-32/BDP10,0-36/BDP10,0-40/BDP10,0-45/BDP10,0-50/BDP10,0-55/BDP10,0-60/BDP10,0-70/BDP10,0-80/BDP10,0-90/BDP10,0-100/BDP12,0-14/BDP12,0-16/BDP12,0-18/BDP12,0-20/BDP12,0-24/BDP12,0-28/BDP12,0-30/BDP12,0-32/BDP12,0-36/BDP12,0-40/BDP12,0-45/BDP12,0-50/BDP12,0-55/BDP12,0-60/BDP12,0-70/BDP12,0-80/BDP12,0-90/BDP12,0-100/B
5560708010121416182024283032364045505560708090
1001416182024283032364045505560708090
100
252525252525252525252525252525252525252525252525252525252525252525252525252525252525
-------�-��----�-�-�---------------�------
28,07 F
30,34 F
34,05 F
40,09 F
15,19 F
16,18 F
17,06 F
18,60 F
19,73 F
20,50 F
23,50 F
25,31 F
26,89 F
27,82 F
30,00 F
31,75 F
35,04 F
38,29 F
41,27 F
43,37 F
50,34 F
56,85 F
62,80 F
68,99 F
23,03 F
24,27 F
26,84 F
28,19 F
31,28 F
35,46 F
37,09 F
38,53 F
42,11 F
44,98 F
48,63 F
53,43 F
57,05 F
61,25 F
70,28 F
81,38 F
90,27 F
99,17 F
0,600,600,600,600,750,750,750,750,750,750,750,750,750,750,750,750,750,750,750,750,750,750,900,900,900,900,900,900,900,900,900,900,900,900,900,900,900,900,900,901,201,201,201,201,201,201,201,201,201,201,201,201,201,201,20
8,08,08,08,0
10,010,010,010,010,010,010,010,010,010,010,010,010,010,010,010,010,010,010,010,012,012,012,012,012,012,012,012,012,012,012,012,012,012,012,012,012,012,0
1,201,201,201,201,501,501,501,501,501,501,501,501,501,501,501,501,501,501,501,501,501,501,501,501,801,801,801,801,801,801,801,801,801,801,801,801,801,801,801,801,801,80
*Depending on availability
ØDm6 C
LengthL
Qty perpacket
ØDm6 C
LengthL
Qty perpacket
Price perpacket
Price perpacket
Partnumber
PartnumberStock* Stock*
4,04,04,04,05,05,05,05,05,05,05,05,05,05,05,05,05,05,05,05,05,05,06,06,06,06,06,06,06,06,06,06,06,06,06,06,06,06,06,06,08,08,08,08,08,08,08,08,08,08,08,08,08,08,08,0
306 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
DHX4-10/BDHX4-12/BDHX4-14/BDHX4-16/BDHX4-20/BDHX4-24/BDHX4-28/BDHX4-30/BDHX4-32/BDHX4-36/BDHX4-40/BDHX4-50/BDHX5-10/BDHX5-12/BDHX5-14/BDHX5-16/BDHX5-18/BDHX5-20/BDHX5-24/BDHX5-28/BDHX5-30/BDHX5-32/BDHX5-36/BDHX5-40/BDHX5-45/B
4444444444445555555555555
M2,5M2,5M2,5M2,5M2,5M2,5M2,5M2,5M2,5M2,5M2,5M2,5M3M3M3M3M3M3M3M3M3M3M3M3M3
10121416202428303236405010121416182024283032364045
10101010101010101010101010101010101010101010101010
�����--�--�-��-�-��-�----
30,56 F
30,67 F
30,80 F
30,91 F
31,22 F
31,32 F
32,26 F
32,47 F
33,12 F
33,44 F
33,96 F
35,29 F
17,52 F
17,62 F
17,67 F
17,73 F
17,83 F
18,11 F
18,41 F
19,14 F
19,27 F
19,54 F
19,94 F
20,39 F
20,72 F
ØDm6 Thread
LengthL
Qtyper
packet
Priceper
packetPart number Stock*
DHX5-50/BDHX6-12/BDHX6-14/BDHX6-16/BDHX6-18/BDHX6-20/BDHX6-24/BDHX6-28/BDHX6-30/BDHX6-32/BDHX6-36/BDHX6-40/BDHX6-45/BDHX6-50/BDHX6-55/BDHX6-60/BDHX8-16/BDHX8-18/BDHX8-20/BDHX8-24/BDHX8-28/BDHX8-30/BDHX8-32/BDHX8-36/BDHX8-40/B
5666666666666666888888888
M3M4M4M4M4M4M4M4M4M4M4M4M4M4M4M4M5M5M5M5M5M5M5M5M5
50121416182024283032364045505560161820242830323640
10101010101010101010101010101010101010101010101010
�������-�--�---��-����--�
23,88 F
17,00 F
17,00 F
15,24 F
15,31 F
14,28 F
14,34 F
14,44 F
14,52 F
14,63 F
14,63 F
14,90 F
15,41 F
16,23 F
16,76 F
17,20 F
17,56 F
18,93 F
14,96 F
15,10 F
15,19 F
15,68 F
15,72 F
15,97 F
16,23 F
ØDm6 Thread
LengthL
Qtyper
packet
Priceper
packetPart number Stock*
*Depending on availability
Hardened steelDHXExtractable dowel pin DIN 7979D
5+-10%
10+-20%
20+-30%
50+On request
1+List
No. packetsDiscounts
DISCOUNTS
15° Ra 0,04 μ
r
L
ØD
- Easy extraction for situations where access is difficultor restricted
- External diameter tolerance: m6- Material: hardened steel (DIN 7979D)- Sold by the packet
.Info..- Ground flat along length allows air to escape
during insertion/removal
extractable
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3071HPC
DHX
DHX8-45/BDHX8-50/BDHX8-55/BDHX8-60/BDHX8-70/BDHX8-80/BDHX8-90/BDHX8-100/BDHX10-16/BDHX10-20/BDHX10-24/BDHX10-28/BDHX10-30/BDHX10-32/BDHX10-36/BDHX10-40/BDHX10-45/BDHX10-50/BDHX10-55/BDHX10-60/BDHX10-70/BDHX10-80/BDHX10-90/BDHX10-100/BDHX10-120/BDHX12-20/BDHX12-24/BDHX12-28/BDHX12-30/BDHX12-32/BDHX12-36/BDHX12-40/BDHX12-45/BDHX12-50/BDHX12-55/BDHX12-60/BDHX12-70/BDHX12-80/BDHX12-90/BDHX12-100/BDHX12-120/BDHX14-32/BDHX14-36/BDHX14-40/B
88888888
101010101010101010101010101010101012121212121212121212121212121212141414
M5M5M5M5M5M5M5M5M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M6M8M8M8
45505560708090
100162024283032364045505560708090
100120
2024283032364045505560708090
100120
323640
1010101010101010101010101010101010101010101010101010101010101010101010101010101010101010
-�------�-�-�--��--�-----------�------------
20,76 F
17,00 F
17,56 F
18,41 F
22,46 F
24,18 F
28,59 F
29,22 F
22,26 F
19,14 F
19,63 F
16,71 F
16,90 F
17,06 F
17,40 F
17,67 F
18,15 F
18,65 F
19,18 F
19,63 F
24,99 F
28,24 F
32,26 F
34,35 F
39,42 F
22,64 F
22,73 F
19,78 F
19,54 F
19,58 F
19,73 F
20,16 F
20,81 F
21,44 F
22,77 F
23,44 F
31,75 F
33,96 F
37,13 F
34,74 F
52,40 F
29,83 F
30,47 F
31,28 F
ØDm6 Thread
LengthL
Qtyper
packet
Priceper
packetPart number Stock*
DHX14-45/BDHX14-50/BDHX14-55/BDHX14-60/BDHX14-70/BDHX14-80/BDHX14-90/BDHX14-100/BDHX14-120/BDHX16-32/BDHX16-36/BDHX16-40/BDHX16-45/BDHX16-50/BDHX16-55/BDHX16-60/BDHX16-70/BDHX16-80/BDHX16-90/BDHX16-100/BDHX16-120/BDHX20-32/BDHX20-36/BDHX20-40/BDHX20-45/BDHX20-50/BDHX20-55/BDHX20-60/BDHX20-70/BDHX20-80/BDHX20-90/BDHX20-100/BDHX20-120/B
141414141414141414161616161616161616161616202020202020202020202020
M8M8M8M8M8M8M8M8M8M8M8M8M8M8M8M8M8M8M8M8M8
M10M10M10M10M10M10M10M10M10M10M10M10
45505560708090
100120
32364045505560708090
100120
32364045505560708090
100120
101010101010101010101010101010101010101010101010101010101010101010
---------------------------------
32,41 F
32,76 F
35,57 F
36,68 F
39,78 F
37,66 F
46,67 F
49,34 F
60,61 F
35,57 F
35,86 F
36,25 F
37,13 F
38,08 F
40,60 F
41,89 F
45,03 F
48,43 F
53,16 F
57,13 F
67,15 F
52,40 F
47,40 F
49,24 F
50,56 F
52,15 F
56,89 F
60,34 F
62,38 F
67,70 F
72,43 F
76,93 F
101,14 F
ØDm6 Thread
LengthL
Qtyper
packet
Priceper
packetPart number Stock*
*Depending on availability
308 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Technical information - dowel pinsMinimum double shear resistance (kN)
according to ISO8749
EP range – nickel stainless steel
DIAMETERS Ø
Standard series ISO 8750
0.8 1.0 1.2 1.5 2.0 2.5 3.0 3.5 4.0 5.0 6.0 8.0 10.0 12.0
0.30 0.45 0.65 1.05 1.9 2.9 4.2 5.7 7.6 11.5 16.8 30 48 67
DIAMETERS ØStandard series ISO 6325
1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0 8.0 10.0 12.0 16.0 20.0
1.5 3.4 5.5 8.0 13.0 22.0 31.0 53.0 88.0 132.0 210.0 350.0 485.0
SRP range – stainless steel 304
DH range – hardened steel
DIAMETERS Ø
Standard series ISO 8752
1.5 2.0 2.5 3.0 4.0 5.0 6.0 8.0 10.0
0.98 1.81 2.84 4.07 7.25 10.75 16.17 26.46 42.14
DIAMETERS ØStandard series ISO 2338
1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0 8.0 10.0 12.0
0.7 1.7 2.9 4.4 6.6 11.7 18.1 26.0 47.0 64.1 92.0
DP range – stainless steel A2
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3091HPC
Cylindrical spacer
Partnumber
NominalØA ØA ØD L
Qty. perpacket
Price perpacket
PLS3-5/BPLS3-6/BPLS3-8/BPLS3-10/BPLS3-12/BPLS3-15/BPLS3-18/BPLS3-20/BPLS3-25/BPLS3-30/BPLS4-5/BPLS4-6/BPLS4-8/BPLS4-10/BPLS4-12/BPLS4-15/BPLS4-18/BPLS4-20/BPLS4-25/BPLS4-30/B
568
10121518202530
568
10121518202530
2020202020202020202020202020202020202020
���-�-----����----��
66666666668888888888
3,23,23,23,23,23,23,23,23,23,24,34,34,34,34,34,34,34,34,34,3
33333333334444444444
21,50 F
22,67 F
23,53 F
25,09 F
25,66 F
27,11 F
28,43 F
29,05 F
31,69 F
33,87 F
23,53 F
24,80 F
25,80 F
27,48 F
28,14 F
29,75 F
31,19 F
31,84 F
34,74 F
37,15 F
- Machined pillar, female/female- Material: Stainless steel 303- Sold by the packet
Longueur L
ØA
ØDLength L
(H13)
(js13) (h11)
Stock*
*Depending on availability
Stainless steel 303 PLS
5+-20%
20+-30%
50+On request
1+List
No. packetsDiscounts
DISCOUNTS
stainless steel
310 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Cylindrical spacerNylonPLN
Longueur L
ØA
ØD
±0,2
±0,2
Partnumber
NominalØA ØA L ØD
Qty. perpacket
Price perpacket
PLN3-3/BPLN3-4/BPLN3-5/BPLN3-6/BPLN3-8/BPLN3-10/BPLN3-12/BPLN3-15/BPLN3-20/BPLN3-25/BPLN3-30/B
66666666666
100100100100100100100100100100100
��������--�
3 ±0,15
4 ±0,15
5 ±0,15
6 ±0,15
8 ±0,15
10 ±0,15
12 ±0,20
15 ±0,20
20 ±0,20
25 ±0,25
30 ±0,25
3,23,23,23,23,23,23,23,23,23,23,2
33333333333
6,21 F
6,21 F
6,21 F
6,21 F
6,21 F
6,21 F
7,86 F
7,86 F
7,86 F
9,84 F
9,84 F
- Moulded pillar- Material: Nylon
.Info..- As supplied, ends are closed - Sold by the packet
Stock*
*Depending on availability
6+-10%
10+On request
1+List
No. packetsDiscounts
DISCOUNTS
Length L
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3111HPC
PLN
100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100
�������-�--��------------�--��������-�
Partnumber
NominalØA ØA L ØD
Qty. perpacket
Price perpacket
PLN4-2/BPLN4-3/BPLN4-4/BPLN4-5/BPLN4-6/BPLN4-8/BPLN4-10/BPLN4-12/BPLN4-15/BPLN4-18/BPLN4-25/BPLN4-30/BPLN5-2/BPLN5-3/BPLN5-4/BPLN5-5/BPLN5-6/BPLN5-8/BPLN5-10/BPLN5-12/BPLN5-15/BPLN5-18/BPLN5-20/BPLN5-25/BPLN5-30/BPLN6-2/BPLN6-3/BPLN6-4/BPLN6-5/BPLN6-6/BPLN6-8/BPLN6-10/BPLN6-12/BPLN6-15/BPLN6-18/BPLN6-20/BPLN6-25/BPLN6-30/B
888888888888
1010101010101010101010101010101010101010101010101010
2 ±0,15
3 ±0,15
4 ±0,15
5 ±0,15
6 ±0,15
8 ±0,15
10 ±0,15
12 ±0,20
15 ±0,20
18 ±0,20
25 ±0,25
30 ±0,25
2 ±0,15
3 ±0,15
4 ±0,15
5 ±0,15
6 ±0,15
8 ±0,15
10 ±0,15
12 ±0,20
15 ±0,20
18 ±0,20
20 ±0,20
25 ±0,25
30 ±0,25
2 ±0,15
3 ±0,15
4 ±0,15
5 ±0,15
6 ±0,15
8 ±0,15
10 ±0,15
12 ±0,20
15 ±0,20
18 ±0,20
20 ±0,20
25 ±0,25
30 ±0,25
4,24,24,24,24,24,24,24,24,24,24,24,25,25,25,25,25,25,25,25,25,25,25,25,25,26,26,26,26,26,26,26,26,26,26,26,26,26,2
44444444444455555555555556666666666666
7,08 F
7,08 F
7,08 F
7,08 F
7,08 F
7,08 F
7,08 F
8,22 F
8,22 F
8,22 F
10,59 F
10,59 F
7,86 F
7,86 F
7,86 F
7,86 F
7,86 F
7,86 F
7,86 F
9,86 F
9,86 F
9,86 F
9,86 F
12,52 F
12,52 F
7,86 F
7,86 F
7,86 F
7,86 F
7,86 F
7,86 F
7,86 F
9,86 F
9,86 F
9,86 F
9,86 F
12,52 F
12,52 F
Stock*
*Depending on availability
6+-10%
10+On request
1+List
No. packetsDiscounts
DISCOUNTS
312 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
BrassPLBCylindrical spacer
Partnumber
NominalØA ØA ØD L
Qty. perpacket
Price perpacket
123458
10121518202530
123458
10121518202530
2020202020202020202020202020202020202020202020202020
��--��---------��------�--
44444444444445555555555555
2,22,22,22,22,22,22,22,22,22,22,22,22,22,52,52,52,52,52,52,52,52,52,52,52,52,5
2,02,02,02,02,02,02,02,02,02,02,02,02,02,52,52,52,52,52,52,52,52,52,52,52,52,5
3,46 F
3,56 F
3,62 F
3,71 F
3,83 F
4,18 F
4,38 F
4,64 F
5,06 F
5,61 F
6,30 F
8,86 F
9,94 F
3,56 F
3,66 F
3,75 F
3,91 F
4,07 F
4,48 F
4,75 F
5,06 F
5,50 F
6,22 F
7,00 F
9,68 F
11,03 F
Longueur L
ØA
ØDLength L
(H13)
(js13) (h11)
- Machined pillar- Material: Brass- Sold by the packet
.Option.- Alternative lengths are available
Stock*
PLB2-1/BPLB2-2/BPLB2-3/BPLB2-4/BPLB2-5/BPLB2-8/BPLB2-10/BPLB2-12/BPLB2-15/BPLB2-18/BPLB2-20/BPLB2-25/BPLB2-30/BPLB2.5-1/BPLB2.5-2/BPLB2.5-3/BPLB2.5-4/BPLB2.5-5/BPLB2.5-8/BPLB2.5-10/BPLB2.5-12/BPLB2.5-15/BPLB2.5-18/BPLB2.5-20/BPLB2.5-25/BPLB2.5-30/B*Depending on availability
5+-20%
20+-30%
50+On request
1+List
No. packetsDiscounts
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3131HPC
Partnumber
NominalØA ØA ØD L
Qty. perpacket
Price perpacket
PLB3-1/BPLB3-2/BPLB3-3/BPLB3-4/BPLB3-5/BPLB3-8/BPLB3-10/BPLB3-12/BPLB3-15/BPLB3-18/BPLB3-20/BPLB3-25/BPLB3-30/BPLB3-35/BPLB3-40/BPLB3-45/BPLB3-50/BPLB4-1/BPLB4-2/BPLB4-3/BPLB4-4/BPLB4-5/BPLB4-8/BPLB4-10/BPLB4-12/BPLB4-15/BPLB4-18/BPLB4-20/BPLB4-25/BPLB4-30/BPLB4-35/BPLB4-40/BPLB4-45/BPLB4-50/BPLB5-1/BPLB5-2/BPLB5-3/BPLB5-4/BPLB5-5/BPLB5-8/BPLB5-10/BPLB5-12/BPLB5-15/BPLB5-18/BPLB5-20/BPLB5-25/BPLB5-30/BPLB5-35/BPLB5-40/B
123458
1012151820253035404550
123458
1012151820253035404550
123458
101215182025303540
20202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
���-�����---------�--������--�------�������-����-
6666666666666666688888888888888888
101010101010101010101010101010
3,23,23,23,23,23,23,23,23,23,23,23,23,23,23,23,23,24,34,34,34,34,34,34,34,34,34,34,34,34,34,34,34,34,35,35,35,35,35,35,35,35,35,35,35,35,35,35,35,3
3,03,03,03,03,03,03,03,03,03,03,03,03,03,03,03,03,04,04,04,04,04,04,04,04,04,04,04,04,04,04,04,04,04,05,05,05,05,05,05,05,05,05,05,05,05,05,05,05,0
3,32 F
3,46 F
3,66 F
3,87 F
4,03 F
4,59 F
5,00 F
5,46 F
6,08 F
6,70 F
7,12 F
9,32 F
10,76 F
12,16 F
14,90 F
17,00 F
19,42 F
3,46 F
3,71 F
3,97 F
4,23 F
4,48 F
5,33 F
5,98 F
6,75 F
7,69 F
8,66 F
9,23 F
11,91 F
13,86 F
15,72 F
18,97 F
21,59 F
on request4,34 F
4,48 F
4,94 F
5,33 F
5,71 F
7,12 F
7,99 F
9,02 F
10,58 F
11,91 F
12,94 F
16,49 F
19,36 F
22,64 F
26,46 F
Stock*
*Depending on availability
314 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Hexagonal spacerSteel or BrassHSE
HSB
L
TL TL
AF
ØM
- HSB2-5/B M2 5 5 4 20 - � - 4,30 F
- HSB2-8/B M2 8 8 4 20 - � - 4,41 F
- HSB2-10/B M2 10 10 4 20 - � - 4,75 F
- HSB2-12/B M2 12 12 4 20 - � - 5,11 F
- HSB2-15/B M2 15 15 4 20 - � - 5,69 F
- HSB2-18/B M2 18 18 4 20 - � - 6,59 F
- HSB2-20/B M2 20 20 4 20 - � - 7,47 F
- HSB2-25/B M2 25 8 4 20 - � - 11,87 F
- HSB2-30/B M2 30 8 4 20 - - - 12,42 F
- HSB2-35/B M2 35 8 4 20 - - - 18,07 F
- HSB2-40/B M2 40 8 4 20 - � - 18,59 F
- HSB2-45/B M2 45 8 4 20 - - - 19,21 F
HSE2,5-5/B HSB2,5-5/B M2,5 5 5 5 20 � � 6,46 F 4,00 F
HSE2,5-8/B HSB2,5-8/B M2,5 8 8 5 20 � � 6,96 F 4,37 F
HSE2,5-10/B HSB2,5-10/B M2,5 10 10 5 20 � � 7,42 F 4,70 F
HSE2,5-12/B HSB2,5-12/B M2,5 12 12 5 20 - � 7,82 F 5,05 F
HSE2,5-15/B HSB2,5-15/B M2,5 15 15 5 20 � - 9,12 F 5,52 F
HSE2,5-18/B HSB2,5-18/B M2,5 18 18 5 20 - - 10,00 F 6,10 F
HSE2,5-20/B HSB2,5-20/B M2,5 20 20 5 20 - - 11,24 F 6,68 F
HSE2,5-25/B HSB2,5-25/B M2,5 25 10 5 20 - - 11,86 F 7,69 F
HSE2,5-30/B HSB2,5-30/B M2,5 30 10 5 20 - - 12,43 F 9,11 F
HSE2,5-35/B HSB2,5-35/B M2,5 35 10 5 20 - - 13,87 F10,49 F
HSE2,5-40/B HSB2,5-40/B M2,5 40 10 5 20 - - 14,69 F13,93 F
HSE2,5-45/B HSB2,5-45/B M2,5 45 10 5 20 - - 15,27 F14,79 F
HSE3-5/B HSB3-5/B M3 5 5 5 20 - � 4,85 F 3,71 F
HSE3-8/B HSB3-8/B M3 8 8 5 20 � � 5,19 F 4,11 F
HSE3-10/B HSB3-10/B M3 10 10 5 20 � � 5,46 F 4,48 F
HSE3-12/B HSB3-12/B M3 12 12 5 20 � - 5,79 F 4,82 F
HSE3-15/B HSB3-15/B M3 15 15 5 20 � � 6,20 F 5,20 F
HSE3-18/B HSB3-18/B M3 18 18 5 20 � - 6,88 F 5,72 F
HSE3-20/B HSB3-20/B M3 20 20 5 20 � � 7,46 F 5,30 F
HSE3-25/B HSB3-25/B M3 25 10 5 20 � � 7,42 F 7,21 F
HSE3-30/B HSB3-30/B M3 30 10 5 20 � - 7,66 F 8,21 F
HSE3-35/B HSB3-35/B M3 35 10 5 20 � � 7,99 F 9,61 F
HSE3-40/B HSB3-40/B M3 40 10 5 20 � � 8,31 F12,31 F
- Female/female pillar- Material: blue steel zinc-plated
by electrolysis or brass- Sold by the packet
ThreadØM L TL AF
Qty.per
packet Steel Brass Steel BrassPart number
Steel BrassPrice per packetStock* Stock*
*Depending on availability
5+-20%
20+-30%
50+On request
1+List
No. packetsDiscounts
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3151HPC
HSE3-45/B HSB3-45/B M3 45 10 5 20 - - 8,69 F13,35 F
HSE3-50/B HSB3-50/B M3 50 10 5 20 - - 14,00 F15,31 F
HSE3-55/B HSB3-55/B M3 55 10 5 20 - - 14,52 F16,00 F
HSE3-60/B HSB3-60/B M3 60 10 5 20 - - 15,11 F16,85 F
HSE3-70/B HSB3-70/B M3 70 10 5 20 - - 16,51 F18,95 F
HSE3-80/B HSB3-80/B M3 80 10 5 20 - - 18,04 F20,83 F
HSE4-5/B HSB4-5/B M4 5 5 7 20 - - 5,82 F 4,55 F
HSE4-8/B HSB4-8/B M4 8 8 7 20 - � 6,13 F 5,00 F
HSE4-10/B HSB4-10/B M4 10 10 7 20 � - 6,30 F 5,41 F
HSE4-12/B HSB4-12/B M4 12 12 7 20 � - 6,70 F 5,89 F
HSE4-15/B HSB4-15/B M4 15 15 7 20 � � 7,31 F 6,77 F
HSE4-18/B HSB4-18/B M4 18 18 7 20 - - 7,94 F 7,58 F
HSE4-20/B HSB4-20/B M4 20 20 7 20 � � 8,88 F 8,29 F
HSE4-25/B HSB4-25/B M4 25 10 7 20 � - 9,19 F 9,71 F
HSE4-30/B HSB4-30/B M4 30 10 7 20 � - 9,89 F 11,45 F
HSE4-35/B HSB4-35/B M4 35 10 7 20 - - 10,51 F13,31 F
HSE4-40/B HSB4-40/B M4 40 10 7 20 - � 11,03 F17,51 F
HSE4-45/B HSB4-45/B M4 45 10 7 20 � � 11,38 F18,85 F
HSE4-50/B HSB4-50/B M4 50 10 7 20 � - 16,89 F20,36 F
HSE4-55/B HSB4-55/B M4 55 10 7 20 - - 17,71 F21,69 F
HSE4-60/B HSB4-60/B M4 60 10 7 20 � - 18,51 F23,04 F
HSE4-70/B HSB4-70/B M4 70 10 7 20 - - 20,20 F25,15 F
HSE4-80/B HSB4-80/B M4 80 10 7 20 � - 21,95 F29,59 F
HSE5-5/B HSB5-5/B M5 5 5 8 20 - - 7,12 F 6,18 F
HSE5-8/B HSB5-8/B M5 8 8 8 20 � - 7,12 F 6,18 F
HSE5-10/B HSB5-10/B M5 10 10 8 20 - - 7,12 F 6,18 F
HSE5-12/B HSB5-12/B M5 12 12 8 20 - - 8,52 F 6,89 F
HSE5-15/B HSB5-15/B M5 15 15 8 20 � - 9,30 F 7,86 F
HSE5-18/B HSB5-18/B M5 18 18 8 20 - - 12,23 F 8,95 F
HSE5-20/B HSB5-20/B M5 20 20 8 20 � - 12,85 F 9,76 F
HSE5-25/B HSB5-25/B M5 25 10 8 20 � - 13,80 F 11,52 F
HSE5-30/B HSB5-30/B M5 30 10 8 20 � � 14,96 F13,41 F
HSE5-35/B HSB5-35/B M5 35 10 8 20 - - 15,57 F17,96 F
HSE5-40/B HSB5-40/B M5 40 10 8 20 � - 16,43 F19,48 F
HSE5-45/B HSB5-45/B M5 45 10 8 20 - - 17,48 F21,18 F
HSE5-50/B HSB5-50/B M5 50 10 8 20 � - 18,86 F23,01 F
HSE5-55/B HSB5-55/B M5 55 10 8 20 - - 20,16 F24,69 F
HSE5-60/B HSB5-60/B M5 60 10 8 20 - � 21,26 F26,55 F
HSE5-70/B HSB5-70/B M5 70 10 8 20 � � 23,25 F30,67 F
HSE5-80/B HSB5-80/B M5 80 10 8 20 - - 26,11 F39,68 F
HSE6-10/B - M6 10 10 10 20 � - 16,92 F -HSE6-12/B - M6 12 12 10 20 � - 17,28 F -HSE6-15/B - M6 15 15 10 20 � - 18,21 F -HSE6-18/B - M6 18 18 10 20 � - 19,20 F -HSE6-20/B - M6 20 20 10 20 � - 20,02 F -HSE6-25/B - M6 25 25 10 20 � - 21,83 F -HSE6-30/B - M6 30 13 10 20 � - 22,74 F -HSE6-35/B - M6 35 13 10 20 - - 23,66 F -HSE6-40/B - M6 40 13 10 20 � - 24,58 F -HSE6-45/B - M6 45 13 10 20 � - 25,63 F -HSE6-50/B - M6 50 13 10 20 � - 26,74 F -HSE6-55/B - M6 55 13 10 20 - - 27,85 F -HSE6-60/B - M6 60 13 10 20 � - 29,46 F -HSE6-70/B - M6 70 13 10 20 - - 31,81 F -HSE6-80/B - M6 80 13 10 20 - - 33,22 F -
ThreadØM L TL AF
Qty.per
packet Steel Brass Steel BrassPart number
Steel BrassPrice per packetStock* Stock*
*Depending on availability
316 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Hexagonal spacerSteelMPE
L4
R
AFØM
L2
L1 L3
ØM
ThreadØM L1 L2 L3 L4 AF R
Qty. perpacket
Price perpacketPart number
MPE3-5/B M3 5 3 8 0,90 5 0,10 20 � 4,53 F
MPE3-8/B M3 8 4 8 0,90 5 0,10 20 � 5,79 F
MPE3-10/B M3 10 6 8 0,90 5 0,10 20 � 6,17 F
MPE3-12/B M3 12 8 8 0,90 5 0,10 20 � 6,30 F
MPE3-15/B M3 15 8 8 0,90 5 0,10 20 � 6,46 F
MPE3-18/B M3 18 8 8 0,90 5 0,10 20 � 6,63 F
MPE3-20/B M3 20 8 8 0,90 5 0,10 20 � 6,75 F
MPE3-25/B M3 25 10 10 0,90 5 0,10 20 � 7,79 F
MPE3-30/B M3 30 10 10 0,90 5 0,10 20 � 8,11 F
MPE3-35/B M3 35 10 10 0,90 5 0,10 20 � 8,48 F
MPE3-40/B M3 40 10 10 0,90 5 0,10 20 � 13,24 F
MPE3-45/B M3 45 10 10 0,90 5 0,10 20 � 14,34 F
MPE3-50/B M3 50 10 10 0,90 5 0,10 20 � 15,52 F
MPE3-55/B M3 55 10 10 0,90 5 0,10 20 - 16,36 F
MPE3-60/B M3 60 10 10 0,90 5 0,10 20 - 17,28 F
MPE3-70/B M3 70 10 10 0,90 5 0,10 20 - 18,69 F
MPE3-80/B M3 80 10 10 0,90 5 0,10 20 - 19,89 F
MPE4-5/B M4 5 3 8 1,20 7 0,20 20 � 7,23 F
MPE4-8/B M4 8 4 8 1,20 7 0,20 20 � 7,79 F
MPE4-10/B M4 10 6 8 1,20 7 0,20 20 � 7,19 F
MPE4-12/B M4 12 8 8 1,20 7 0,20 20 � 7,74 F
MPE4-15/B M4 15 8 8 1,20 7 0,20 20 � 7,85 F
MPE4-18/B M4 18 8 8 1,20 7 0,20 20 - 8,56 F
- Male/female pillar- Material: blue steel zinc-plated
by electrolysis- Sold by the packet
Stock*
*Depending on availability
5+-20%
20+-30%
50+On request
1+List
No. packetsDiscounts
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3171HPC
MPE
ThreadØM L1 L2 L3 L4 AF R
Qty. perpacket
MPE4-20/B M4 20 8 8 1,20 7 0,20 20 � 8,85 F
MPE4-25/B M4 25 10 10 1,20 7 0,20 20 � 10,37 F
MPE4-30/B M4 30 10 10 1,20 7 0,20 20 � 11,08 F
MPE4-35/B M4 35 10 10 1,20 7 0,20 20 � 11,77 F
MPE4-40/B M4 40 10 10 1,20 7 0,20 20 � 16,81 F
MPE4-45/B M4 45 10 10 1,20 7 0,20 20 � 17,92 F
MPE4-50/B M4 50 10 10 1,20 7 0,20 20 - 19,02 F
MPE4-55/B M4 55 10 10 1,20 7 0,20 20 - 20,23 F
MPE4-60/B M4 60 10 10 1,20 7 0,20 20 � 21,33 F
MPE4-70/B M4 70 10 10 1,20 7 0,20 20 � 24,14 F
MPE4-80/B M4 80 10 10 1,20 7 0,20 20 � 26,03 F
MPE5-5/B M5 5 3 8 1,40 8 0,20 20 - 11,63 F
MPE5-8/B M5 8 4 8 1,40 8 0,20 20 - 11,63 F
MPE5-10/B M5 10 6 8 1,40 8 0,20 20 � 11,63 F
MPE5-12/B M5 12 8 8 1,40 8 0,20 20 � 12,06 F
MPE5-15/B M5 15 8 8 1,40 8 0,20 20 � 12,66 F
MPE5-18/B M5 18 8 8 1,40 8 0,20 20 - 13,31 F
MPE5-20/B M5 20 8 8 1,40 8 0,20 20 � 13,80 F
MPE5-25/B M5 25 10 10 1,40 8 0,20 20 � 15,01 F
MPE5-30/B M5 30 10 10 1,40 8 0,20 20 � 15,93 F
MPE5-35/B M5 35 10 10 1,40 8 0,20 20 - 17,48 F
MPE5-40/B M5 40 10 10 1,40 8 0,20 20 � 19,14 F
MPE5-45/B M5 45 10 10 1,40 8 0,20 20 � 20,16 F
MPE5-50/B M5 50 10 10 1,40 8 0,20 20 � 21,30 F
MPE5-55/B M5 55 10 10 1,40 8 0,20 20 - 22,50 F
MPE5-60/B M5 60 10 10 1,40 8 0,20 20 � 23,81 F
MPE5-70/B M5 70 10 10 1,40 8 0,20 20 - 26,69 F
MPE5-80/B M5 80 10 10 1,40 8 0,20 20 � 31,22 F
MPE6-10/B M6 10 6 12 2,10 10 0,25 20 � 17,58 F
MPE6-12/B M6 12 8 12 2,10 10 0,25 20 � 17,75 F
MPE6-15/B M6 15 8 12 2,10 10 0,25 20 � 18,54 F
MPE6-18/B M6 18 12 12 2,10 10 0,25 20 - 19,06 F
MPE6-20/B M6 20 13 12 2,10 10 0,25 20 � 19,77 F
MPE6-25/B M6 25 13 12 2,10 10 0,25 20 � 21,50 F
MPE6-30/B M6 30 13 12 2,10 10 0,25 20 � 22,53 F
MPE6-35/B M6 35 13 12 2,10 10 0,25 20 � 23,56 F
MPE6-40/B M6 40 13 12 2,10 10 0,25 20 � 24,58 F
MPE6-45/B M6 45 13 12 2,10 10 0,25 20 � 25,72 F
MPE6-50/B M6 50 13 12 2,10 10 0,25 20 � 27,17 F
MPE6-55/B M6 55 13 12 2,10 10 0,25 20 - 28,23 F
MPE6-60/B M6 60 13 12 2,10 10 0,25 20 � 29,26 F
MPE6-70/B M6 70 13 12 2,10 10 0,25 20 � 31,78 F
MPE6-80/B M6 80 13 12 2,10 10 0,25 20 � 33,84 F
Price perpacketPart number Stock*
*Depending on availability
318 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
ThreadØM L1 L2 L3 L4 AF R
Qty. perpacket
Price perpacketPart number
MPB2-5/B M2 5 3 6 0,70 4 0,10 20 � 5,00 F
MPB2-8/B M2 8 4 6 0,70 4 0,10 20 � 5,37 F
MPB2-10/B M2 10 6 6 0,70 4 0,10 20 � 5,72 F
MPB2-12/B M2 12 8 6 0,70 4 0,10 20 � 6,14 F
MPB2-15/B M2 15 8 6 0,70 4 0,10 20 - 6,80 F
MPB2-18/B M2 18 8 6 0,70 4 0,10 20 - 7,41 F
MPB2-20/B M2 20 8 6 0,70 4 0,10 20 � 8,02 F
MPB2-25/B M2 25 8 6 0,70 4 0,10 20 - 9,14 F
MPB2-30/B M2 30 8 6 0,70 4 0,10 20 - 10,49 F
MPB2-35/B M2 35 8 6 0,70 4 0,10 20 � 13,75 F
MPB2-40/B M2 40 8 6 0,70 4 0,10 20 - 14,66 F
MPB2,5-5/B M2,5 5 3 6 0,80 5 0,10 20 � 4,82 F
MPB2,5-8/B M2,5 8 4 6 0,80 5 0,10 20 � 5,30 F
MPB2,5-10/B M2,5 10 6 6 0,80 5 0,10 20 � 5,72 F
MPB2,5-12/B M2,5 12 8 6 0,80 5 0,10 20 � 6,24 F
MPB2,5-15/B M2,5 15 8 6 0,80 5 0,10 20 � 6,89 F
MPB2,5-18/B M2,5 18 8 6 0,80 5 0,10 20 - 7,69 F
MPB2,5-20/B M2,5 20 8 6 0,80 5 0,10 20 � 8,35 F
MPB2,5-25/B M2,5 25 8 6 0,80 5 0,10 20 - 9,58 F
MPB2,5-30/B M2,5 30 8 6 0,80 5 0,10 20 � 10,97 F
MPB2,5-35/B M2,5 35 8 6 0,80 5 0,10 20 - 14,45 F
MPB2,5-40/B M2,5 40 8 6 0,80 5 0,10 20 - 15,47 F
Stock*
Hexagonal spacerBrassMPB
- Male/female pillar- Material: nickel brass- Sold by the packet
L4
R
AFØM
L2
L1 L3
ØM
*Depending on availability
5+-20%
20+-30%
50+On request
1+List
No. packets
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3191HPC
MPB3-5/B M3 5 3 8 0,90 5 0,10 20 � 4,75 F
MPB3-8/B M3 8 4 8 0,90 5 0,10 20 � 5,05 F
MPB3-10/B M3 10 6 8 0,90 5 0,10 20 � 5,41 F
MPB3-12/B M3 12 8 8 0,90 5 0,10 20 - 5,72 F
MPB3-15/B M3 15 8 8 0,90 5 0,10 20 � 6,37 F
MPB3-18/B M3 18 8 8 0,90 5 0,10 20 � 7,07 F
MPB3-20/B M3 20 8 8 0,90 5 0,10 20 � 7,50 F
MPB3-25/B M3 25 10 10 0,90 5 0,10 20 � 8,69 F
MPB3-30/B M3 30 10 10 0,90 5 0,10 20 � 9,84 F
MPB3-35/B M3 35 10 10 0,90 5 0,10 20 � 13,86 F
MPB3-40/B M3 40 10 10 0,90 5 0,10 20 � 14,79 F
MPB3-45/B M3 45 10 10 0,90 5 0,10 20 - 15,70 F
MPB3-50/B M3 50 10 10 0,90 5 0,10 20 � 16,70 F
MPB3-50/B M3 55 10 10 0,90 5 0,10 20 � 16,70 F
MPB3-60/B M3 60 10 10 0,90 5 0,10 20 - 18,55 F
MPB3-70/B M3 70 10 10 0,90 5 0,10 20 � 20,29 F
MPB3-80/B M3 80 10 10 0,90 5 0,10 20 - 21,91 F
MPB4-5/B M4 5 3 8 1,20 7 0,20 20 - 6,28 F
MPB4-8/B M4 8 4 8 1,20 7 0,20 20 � 6,98 F
MPB4-10/B M4 10 6 8 1,20 7 0,20 20 � 7,37 F
MPB4-12/B M4 12 8 8 1,20 7 0,20 20 � 7,86 F
MPB4-15/B M4 15 8 8 1,20 7 0,20 20 - 8,69 F
MPB4-18/B M4 18 8 8 1,20 7 0,20 20 � 9,61 F
MPB4-20/B M4 20 8 8 1,20 7 0,20 20 � 10,35 F
MPB4-25/B M4 25 10 10 1,20 7 0,20 20 � 11,82 F
MPB4-30/B M4 30 10 10 1,20 7 0,20 20 � 13,48 F
MPB4-35/B M4 35 10 10 1,20 7 0,20 20 - 18,25 F
MPB4-40/B M4 40 10 10 1,20 7 0,20 20 � 20,29 F
MPB4-45/B M4 45 10 10 1,20 7 0,20 20 � 21,79 F
MPB4-50/B M4 50 10 10 1,20 7 0,20 20 � 23,57 F
MPB4-55/B M4 55 10 10 1,20 7 0,20 20 - 25,12 F
MPB4-60/B M4 60 10 10 1,20 7 0,20 20 - 26,82 F
MPB4-70/B M4 70 10 10 1,20 7 0,20 20 - 29,81 F
MPB4-80/B M4 80 10 10 1,20 7 0,20 20 - 32,28 F
MPB5-5/B M5 5 3 8 1,40 8 0,20 20 - 9,51 F
MPB5-8/B M5 8 4 8 1,40 8 0,20 20 - 9,51 F
MPB5-10/B M5 10 6 8 1,40 8 0,20 20 � 9,51 F
MPB5-12/B M5 12 8 8 1,40 8 0,20 20 - 10,32 F
MPB5-15/B M5 15 8 8 1,40 8 0,20 20 - 11,52 F
MPB5-18/B M5 18 8 8 1,40 8 0,20 20 - 12,82 F
MPB5-20/B M5 20 8 8 1,40 8 0,20 20 � 14,12 F
MPB5-25/B M5 25 10 10 1,40 8 0,20 20 � 16,48 F
MPB5-30/B M5 30 10 10 1,40 8 0,20 20 � 20,03 F
MPB5-35/B M5 35 10 10 1,40 8 0,20 20 - 21,83 F
MPB5-40/B M5 40 10 10 1,40 8 0,20 20 � 23,75 F
MPB5-45/B M5 45 10 10 1,40 8 0,20 20 - 25,65 F
MPB5-50/B M5 50 10 10 1,40 8 0,20 20 � 27,74 F
MPB5-55/B M5 55 10 10 1,40 8 0,20 20 - 29,45 F
MPB5-60/B M5 60 10 10 1,40 8 0,20 20 � 31,35 F
MPB5-70/B M5 70 10 10 1,40 8 0,20 20 - 34,94 F
MPB5-80/B M5 80 10 10 1,40 8 0,20 20 - 41,59 F
*Depending on availability
ThreadØM L1 L2 L3 L4 AF R
Qty. perpacket
Price perpacketPart number Stock*
320 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Hexagonal spacerStainless steel 303HS
Partnumber
ThreadØM L TL AF
Qty perpacket
- Female/female pillar- Material: stainless steel 303- Sold by the packet
L
TL TL
AF
ØM
Stock*
*Depending on availability
Price perpacket
5+-20%
20+-30%
50+On request
1+List
N°. packetsDisc.
DISCOUNTS
HS3-5/B M3 5 5 5,5 20 � 13,02 F
HS3-8/B M3 8 8 5,5 20 - 13,76 F
HS3-10/B M3 10 10 5,5 20 � 14,04 F
HS3-12/B M3 12 12 5,5 20 � 15,53 F
HS3-15/B M3 15 15 5,5 20 � 17,11 F
HS3-18/B M3 18 18 5,5 20 � 19,39 F
HS3-20/B M3 20 20 5,5 20 � 21,28 F
HS3-25/B M3 25 10 5,5 20 - 22,40 F
HS3-35/B M3 35 10 5,5 20 � 24,88 F
HS3-40/B M3 40 10 5,5 20 - 25,51 F
HS3-45/B M3 45 10 5,5 20 - 26,23 F
HS4-5/B M4 5 5 7,0 20 - 15,41 F
HS4-8/B M4 8 8 7,0 20 - 16,79 F
HS4-10/B M4 10 10 7,0 20 � 18,36 F
HS4-12/B M4 12 12 7,0 20 � 19,68 F
HS4-15/B M4 15 15 7,0 20 - 22,04 F
HS4-18/B M4 18 18 7,0 20 - 23,98 F
HS4-20/B M4 20 20 7,0 20 � 24,39 F
HS4-25/B M4 25 10 7,0 20 � 24,76 F
stainless steel
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3211HPC
Hexagonal spacerStainless steel 303 MPS
MPS3-5/B M3 5 3 8 5,50 20 � 18,24 F
MPS3-8/B M3 8 4 8 5,50 20 � 18,68 F
MPS3-10/B M3 10 6 8 5,50 20 � 19,01 F
MPS3-12/B M3 12 8 8 5,50 20 � 20,27 F
MPS3-15/B M3 15 8 8 5,50 20 � 20,75 F
MPS3-18/B M3 18 8 8 5,50 20 � 21,24 F
MPS3-20/B M3 20 8 8 5,50 20 � 21,52 F
MPS3-25/B M3 25 10 10 5,50 20 � 24,18 F
MPS4-5/B M4 5 3 8 7,00 20 � 18,96 F
MPS4-8/B M4 8 4 8 7,00 20 � 19,65 F
MPS4-10/B M4 10 6 8 7,00 20 � 20,14 F
MPS4-12/B M4 12 8 8 7,00 20 - 21,52 F
MPS4-15/B M4 15 8 8 7,00 20 - 22,24 F
MPS4-18/B M4 18 8 8 7,00 20 - 22,89 F
MPS4-20/B M4 20 8 8 7,00 20 � 23,39 F
MPS4-25/B M4 25 10 10 7,00 20 � 26,55 F
ØM ØM
L3 L1
L2
AF
- Male/female pillar- Material: stainless steel 303- Sold by the packet
ThreadØM L1 L2 L3 AF
Qty. perpacket
Price perpacketPart number Stock*
*Depending on availability
5+-20%
20+-30%
50+On request
1+List
N°. packetsDisc.
DISCOUNTS
stainless steel
322 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
M3M3M3M3M3
1012151820
5,55,55,55,55,5
2020202020
13,83 F
15,30 F
16,87 F
--
Thread ØT L AF
Qty perpacket
MHX3-10/BMHX3-12/BMHX3-15/BMHX3-18/BMHX3-20/B
5,42 F
5,57 F
6,13 F
6,77 F
7,19 F
MHX3-10/SS/BMHX3-12/SS/BMHX3-15/SS/B
--
Part numberSteel Stainless steel
Price per packet 1 to 4,Steel Stainless steel
Hexagonal threaded sleeves
- Hexagonal sleeves, throughthreaded
- Suitable for joining threaded bars- Materials:
Blue galvanised steel S300PBStainless steel 303
- Sold by the packet
MHX Steel or stainless steel
L
ØT
AF
5+-5%
1+List
N°. packetsDisc.
DISCOUNTS20+
-10%50+
On request
Available in steel
or stainless steel
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3231HPC
M4M4M4M4M4M5M5M5M5M5M6M6M6M6M6M6M6M6M8M8M8M8M8M8M8M8M8M10M10M10M10M10M10M10M12M12M12M12M12M12
10121518201215182025151820253035405015202530354045506020253040506070253040506070
7,07,07,07,07,08,08,08,08,08,0
10,010,010,010,010,010,010,010,013,013,013,013,013,013,013,013,013,017,017,017,017,017,017,017,019,019,019,019,019,019,0
20202020202020202020202020202020202020202020202020202020202020202020202020202020
18,12 F
19,39 F
21,75 F
--
20,70 F
21,86 F
23,09 F
23,48 F
-30,06 F
31,71 F
32,87 F
33,33 F
39,89 F
-----
56,51 F
66,94 F
------
96,59 F
115,72 F
154,06 F
----
136,78 F
162,47 F
202,72 F
--
MHX4-10/BMHX4-12/BMHX4-15/BMHX4-18/BMHX4-20/B
-MHX5-15/B
-MHX5-20/BMHX5-25/BMHX6-15/BMHX6-18/BMHX6-20/BMHX6-25/BMHX6-30/BMHX6-35/BMHX6-40/BMHX6-50/BMHX8-15/BMHX8-20/BMHX8-25/BMHX8-30/BMHX8-35/BMHX8-40/BMHX8-45/BMHX8-50/BMHX8-60/BMHX10-20/BMHX10-25/BMHX10-30/BMHX10-40/BMHX10-50/BMHX10-60/BMHX10-70/BMHX12-25/BMHX12-30/BMHX12-40/BMHX12-50/BMHX12-60/BMHX12-70/B
5,60 F
5,96 F
6,52 F
7,07 F
7,95 F
-5,42 F
-5,90 F
7,03 F
6,55 F
7,03 F
7,29 F
7,78 F
8,91 F
10,90 F
11,80 F
20,28 F
10,40 F
12,03 F
14,66 F
16,90 F
19,54 F
22,17 F
26,29 F
33,03 F
40,06 F
16,64 F
20,54 F
24,40 F
32,29 F
40,06 F
49,30 F
57,78 F
25,64 F
31,42 F
41,16 F
51,41 F
61,41 F
70,79 F
MHX4-10/SS/BMHX4-12/SS/BMHX4-15/SS/B
--
MHX5-12/SS/BMHX5-15/SS/BMHX5-18/SS/BMHX5-20/SS/B
-MHX6-15/SS/BMHX6-18/SS/BMHX6-20/SS/BMHX6-25/SS/BMHX6-30/SS/B
-----
MHX8-25/SS/BMHX8-30/SS/B
------
MHX10-25/SS/BMHX10-30/SS/BMHX10-40/SS/B
----
MHX12-30/SS/BMHX12-40/SS/BMHX12-50/SS/B
--
Part numberSteel Stainless steel
Price per packet 1 to 4,Thread ØT L AF
Qty perpacket Steel Stainless steel
MHX
5+-5%
1+List
N°. packetsDisc.
DISCOUNTS20+
-10%50+
On request
324 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Blind rivetsFlat headRIVTP
AluminiumAl Mg 3,5
Zinc platedsteel
Rivetedmaterial
L
ShearTension
ØD2
ØD1
10+-10%
20+On request
1+List
Qty.Disc.
DISCOUNTS
RIV4-8/TP/BRIV4-9/TP/BRIV4-10/TP/BRIV4-11/TP/BRIV4-12/TP/BRIV4-14/TP/BRIV4-16/TP/BRIV4-18/TP/BRIV4-20/TP/BRIV4,8-8/TP/BRIV4,8-9/TP/BRIV4,8-10/TP/BRIV4,8-11/TP/BRIV4,8-12/TP/BRIV4,8-14/TP/BRIV4,8-16/TP/BRIV4,8-18/TP/BRIV4,8-20/TP/B
444444444
4,84,84,84,84,84,84,84,84,8
89101112141618208910111214161820
888888888
9,59,59,59,59,59,59,59,59,5
3456781012142,53,54,55,56,57,59,511,513,5
4,55,56,57,58,510,512,514,516,5
4567810121416
17,37 F
17,99 F
19,42 F
20,71 F
22,54 F
23,73 F
13,01 F
14,10 F
14,57 F
20,17 F
21,59 F
11,47 F
11,99 F
12,65 F
15,29 F
16,85 F
19,09 F
20,81 F
-�������������-�-�
Part number ØD1 L ØD2 mini. maxi.Price each
1 to 9Strength Traction cisaillement
(N) (N) packet (kg)Qty per
Weightper 1000
210021002100210021002100210021002100258025802580258025802580258025802580
135013501350135013501350135013501350215021502150215021502150215021502150
100010001000100010001000500500500
10001000500500500500500500500
1,651,761,791,871,892,092,122,282,342,362,472,542,662,683,003,063,283,37
Stock*
*Depending on availability
Load max.
- Flat headed blind rivet- Materials:
Head: aluminium AIMg3.5Mandrel: zinc plated steel
iMountingi- RIV-TOOL hand riveting pliers will
be required
iInfo.i- Sold by the packet
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3251HPC
Stainless steel blind rivets
- Flat headed blind rivet- Materials: Stainless steel A2
iMountingi- RIV-TOOL hand riveting pliers will
be required
iInfo.i- Sold by the packet
Flat head RIVTPSS
stainless steelA2
stainless steelA2
L
ShearTension
ØD2
ØD1
Rivetedmaterial
10+-10%
20+On request
1+List
Qty.Disc.
DISCOUNTS
stainless steel
RIV4-6/TP/SS/BRIV4-8/TP/SS/BRIV4-10/TP/SS/BRIV4-12/TP/SS/BRIV4-14/TP/SS/BRIV4-16/TP/SS/BRIV4,8-8/TP/SS/BRIV4,8-10/TP/SS/BRIV4,8-12/TP/SS/BRIV4,8-14/TP/SS/BRIV4,8-16/TP/SS/BRIV4,8-18/TP/SS/BRIV4,8-20/TP/SS/B
444444
4,84,84,84,84,84,84,8
68101214168101214161820
888888
9,59,59,59,59,59,59,5
124
6,57142,546
7,59,511,513,5
3,54,56,58
9,516,5
468
10121416
90,29 F
96,22 F
102,47 F
116,31 F
61,46 F
72,11 F
66,03 F
72,55 F
79,57 F
87,07 F
97,77 F
104,68 F
110,54 F
---�-�---�---
Part number ØD1 L ØD2 mini. maxi.Price each
1 to 9Strength Tension Shear
(N) (N) packet (kg)Qty per
Weightper 1000
Load max.
4500450045004500450045005600560056005600560056005600
3800380038003800380038004700470047004700470047004700
1000100010001000500500500500500500500500500
2,402,502,602,853,153,303,854,004,354,804,955,405,50
Stock*
*Depending on availability
326 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Blind rivets
- Flat headed blind rivet- Materials:
Head: aluminium AIMg3.5Mandrel: zinc plated steel
iMountingi- RIV-TOOL hand riveting pliers will
be required
iInfo.i- Sold by the packet
Flat head - extra wideRIVTX
AluminiumAl Mg 3,5
Zincplatedsteel
Rivetedmaterial
L
ShearTension
ØD2
ØD1
10+-10%
20+On request
1+List
Qty.Disc.
DISCOUNTS
RIV4-8/TX/BRIV4-10/TX/BRIV4-12/TX/BRIV4-14/TX/BRIV4-16/TX/BRIV4-20/TX/BRIV4,8-10/TX/BRIV4,8-12/TX/BRIV4,8-14/TX/BRIV4,8-16/TX/BRIV4,8-18/TX/BRIV4,8-20/TX/B
444444
4,84,84,84,84,84,8
81012141620101214161820
121212121212161616161616
357810134,55,57,59,511,513,5
4,56,58,510,512,516,5
6810121416
12,25 F13,73 F
15,66 F
16,47 F
18,07 F
19,63 F
15,29 F
16,71 F
9,31 F
10,76 F
11,86 F
12,84 F
-��-�-�����-
Part number ØD1 L ØD2 mini. maxi.Price each
1 to 9Strength Tension Shear
(N) (N) packet (kg)Qty per
Weightper 1000
Load max.
210021002100210021002100285028502850285028502850
135013501350135013501350215021502150215021502150
500500500500500500500500250250250250
1,892,062,152,362,382,583,133,303,653,683,863,92
Stock*
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3271HPC
Blind rivets
- Countersunk blind rivet- Materials:
Head: aluminium AIMg3.5Mandrel: zinc plated steel
iMountingi- RIV-TOOL hand riveting pliers will
be required
iInfo.i- Sold by
thepacket
Countersunk head
AluminiumAl Mg 3,5
Zincplatedsteel
Rivetedmaterial
L
ØD2
ØD1
ShearTension
RIVTF
10+-10%
20+On request
1+List
Qty.Disc.
DISCOUNTS
RIV4-7/TF/BRIV4-9/TF/BRIV4-11/TF/BRIV4-12/TF/BRIV4-14/TF/BRIV4-16/TF/BRIV4-18/TF/BRIV4-20/TF/BRIV4.8-7/TF/BRIV4.8-9/TF/BRIV4.8-11/TF/BRIV4.8-12/TF/BRIV4.8-14/TF/BRIV4.8-16/TF/BRIV4.8-18/TF/BRIV4.8-20/TF/B
44444444
4,84,84,84,84,84,84,84,8
7911121416182079111214161820
7,57,57,57,57,57,57,57,599999999
2,53,55,57,58,5
10,512,514,52,53,54,56,57,59,511,513,5
4689111315174578
10121416
21,05 F
22,44 F
25,83 F
28,21 F
29,63 F
16,28 F
17,59 F
18,23 F
24,31 F
26,92 F
14,95 F
15,79 F
19,09 F
21,05 F
23,88 F
26,04 F
-���-�-�-���-�-�
Part number ØD1 L ØD2 mini. maxi.Price each
1 to 9Strength Tension Shear
(N) (N) packet (kg)Qty per
Weightper 1000
Lod max.
2100210021002100210021002100210025802580258025802580258025802580
1350135013501350135013501350135021502150215021502150215021502150
10001000100010001000500500500
10001000500500500500500500
1,591,681,832,052,102,302,122,332,262,372,572,632,922,993,323,40
Stock*
*Depending on availability
328 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Blind rivets
2,4
3,0
3,2
3,4
4,0
4,8/5
6,0
6,4
7,8
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
3+-5%
10+On request
1+List
Qty.Disc.
DISCOUNTS
- Installation tool- Manually operated
iAdvantagesi- RIV-TOOL-3 has extended arms to give greater
tightening force
RIV-TOOL-6
RIVTOOL
6+-10%
Ø ALUMINIUM STEELSTAINLESS
STEEL COPPER
Ø ALUMINIUM STEELSTAINLESS
STEEL COPPER
2,4
3,0
3,2
3,4
4,0
4,8/5
6,0
6,4
7,8
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
RIV-TOOL-3
RIV-TOOL-6RIV-TOOL-3
StandardExtended arms
260530
0,551,85
19,53 F
112,88 F
��
Part number TypeLength(mm)
Weight(kg)
Price each 1 to 2Stock*
*Depending on availability
Hand riveting pliers
ScrewsSelf tapping insertpage 335
p.338p.335 p.339 p.340
p.347 p.350 p.356
Threaded sleeves Threaded bar
Nylon screw Socket-headscrew
Countersunkscrew
p.358
Set screw
p.330
Rivet nut
Some more of stock
IncreasedstockIncreased
stockShoulder screw
Self tapping
insert
330 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
ØD2
Rivet nut – splined body
10+-10%
20+On request
1+List
Qty.Disc.
- Cylindrical rivet nut- Material: zinc plated steel
iAssemblyi- Requires EAS-TOOL for mounting
iInfo.i- Sold by the packet
Cylindrical headEASTC
Plate
ØD1
L
Tension Shear
DISCOUNTS
EAS4-11/TC/BEAS4-13/TC/BEAS5-13/TC/BEAS5-15,5/TC/BEAS6-16/TC/BEAS6-17,5/TC/BEAS8-17/TC/BEAS8-19,5/TC/B
M4M4M5M5M6M6M8M8
11,013,013,015,516,017,517,019,5
6677991111
0,32,50,53,00,53,00,53,0
2,54,03,05,03,06,03,06,0
75,23 F
75,23 F
80,53 F
80,53 F
50,03 F
50,03 F
58,64 F
29,32 F
Part number ØD1 L ØD2 mini. maxi.Price each
1 to 9Plate Tension Shear
(N) (N) packet (kg)Qty per
Weightper 1000
Max load
70007000110001100016000160002000020000
25002500340034004600460058005800
1000100010001000500500500250
1,351,451,851,953,743,945,445,64
--�-����
Forhole Stock*
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3311HPC
Rivet nut – splined bodyCountersunk head EASTF
ØD2
- Cylindrical rivet nut- Material: zinc plated steel
iAssemblyi- Requires EAS-TOOL for mounting
iInfo.i- Sold by the packet
Max load
Plate
ØD1
L
Tension Shear
10+-10%
20+On request
1+List
Qty.Disc.
DISCOUNTS
EAS4-11/TF/BEAS4-13/TF/BEAS5-13/TF/BEAS5-15/TF/BEAS6-15/TF/BEAS6-17/TF/BEAS8-17/TF/BEAS8-19,5/TF/B
M4M4M5M5M6M6M8M8
11,013,013,015,015,017,017,019,5
6677991111
1,63,51,63,52,54,02,54,0
3,55,04,06,04,06,04,06,0
75,23 F
75,23 F
80,53 F
80,53 F
50,03 F
50,03 F
58,67 F
29,32 F
Part number ØD1 L ØD2 mini. maxi.Price each
1 to 9Plate Tension Shear
(N) (N) packet (kg)Qty per
Weightper 1000
Max load
70007000110001100016000160002000020000
25002500340034004600460058005800
1000100010001000500500500250
1,381,481,891,993,814,015,275,47
�-���--�
Forhole Stock*
*Depending on availability
332 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Rivet nut – splined body
ØD2
- Cylindrical rivet nut- Material: zinc plated steel
iAssemblyi- Requires EAS-TOOL for mounting
iInfo.i- Sold by the packet
Thin headEASTR
Plate
ØD1
L
Tension Shear
10+-10%
20+On request
1+List
Qty.Disc.
DISCOUNTS
EAS4-11/TR/BEAS4-12/TR/BEAS5-12/TR/BEAS5-14/TR/BEAS6-15,5/TR/BEAS6-17,5/TR/BEAS8-16,5/TR/BEAS8-18,5/TR/B
M4M4M5M5M6M6M8M8
11,012,012,014,015,517,516,518,5
6677991111
0,51,50,52,00,52,50,53,0
2,04,02,54,52,55,53,56,0
75,23 F
75,23 F
80,53 F
80,53 F
50,03 F
50,03 F
58,67 F
29,32 F
Part number ØD1 L ØD2 mini. maxi.Price each
1 to 9Plate Tension Shear
(N) (N) packet (kg)Qty per
Weightper 1000
Max load
70007000110001100016000160002000020000
25002500340034004600460058005800
1000100010001000500500500250
1,301,401,741,843,513,714,875,07
--�-�--�
Forhole Stock*
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3331HPC
Threaded inserts
3+-5%
6+-10%
10+On request
1+List
Qty.Disc.
DISCOUNTS
- Installation tool- Manually operated
Insertion tool EASTOOL
Thread STEEL STAINLESS STEEL COPPER
M3
M4
M5
M6
M8
M10
M12
�
�
�
�
�
�
�
�
�
�
�
�
�
�
EAS-TOOL 530 2,30 � 299,61 F
Part numberLength(mm)
Weight(kg)
Price each1 to 2Stock*
*Depending on availability
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3351HPC
INS300-M3INS300-M4INS300-M5INS300-M6INS300-M8INS300-M10INS300-M12INS300-M14INS300-M16
M3 M5 X 0,5 6 4,6 4,8M4 M6,5 X 0,75 8 5,8 6,2M5 M8 X 1 10 7,1 7,6M6 M10 X 1,5 14 8,6 9,4M8 M12 X 1,5 15 10,6 11,4
M10 M14 X 1,5 18 12,6 13,4M12 M16 X 1,5 22 14,6 15,4M14 M18 X 1,5 24 16,6 17,4M16 M20 X 1,5 25 18,6 19,4
0,34 F
0,37 F
0,65 F
0,62 F
0,83 F
1,88 F
1,71 F
7,61 F
11,35 F
Part numberPrice each
1 to 39Internal thread External thread Length Recommended drill size
ØD1 ØD2 L mini maxi
Self tapping steel insert
- Self tapping insert with fineexternal thread
- Material: chromed zinc steel
.Applications.- For use with aluminium or other
non ferrous metals, thermoplasticsand hardwoods
.Mounting.- Mount the insert in a plain hole
with the aid of a tap, a drill fittedwith a threaded head or anautomatic threading machine.
- The insert should be installed insuch a way that the thread/slot cutsits own thread
- For soft material the initial holeshould be drilled at the minimumrecommended size, for a hardmaterial, at the maximumrecommended size
.Info..- Not sold individually,
contact us for details
40+-5%
1+List
Qty.Disc.
DISCOUNTS
INSFor hard materials
L
ØD2 ØD1
80+-10%
120+-15%
200+On request
Excellent
resistance to
being removed
���������
Stock*
Increasedstock
*Depending on availability
336 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
INS300-M3/BRINS300-M4/BRINS300-M5/BRINS300-M6/BRINS300-M8/BRINS300-M10/BRINS300-M12/BR
M3 M5 X 0,5 6 4,6 4,8M4 M6,5 X 0,75 8 5,8 6,2M5 M8 X 1 10 7,1 7,6M6 M10 X 1,5 14 8,6 9,4M8 M12 X 1,5 15 10,6 11,4
M10 M14 X 1,5 18 12,6 13,4M12 M16 X 1,5 22 14,6 15,4
0,42 F
0,33 F
0,65 F
0,97 F
1,44 F
2,94 F
5,97 F
Part numberPrice each
1 to 39Internal thread External thread Length Recommended drill size
ØD1 ØD2 L mini maxi
L
ØD2 ØD1
Self tapping brass insert
- Self tapping insert with fineexternal thread
- Material: brassApplication
.Applications.- For use with thermoplastics and
hardwoods
.Mounting.- Mount the insert in a plain hole
with the aid of a tap, a drill fittedwith a threaded head or anautomatic threading machine.
- The insert should be installed insuch a way that the thread/slot cutsits own thread
- For soft material the initial holeshould be drilled at the minimumrecommended size, for a hardmaterial, at the maximumrecommended size
.Info..- Not sold individually,
contact us for details
INSBR For plastics
Excellent
resistance to
being removed
40+-5%
1+List
Qty.Disc.
DISCOUNTS80+
-10%120+-15%
200+On request
�������
Stock*
*Depending on availability
Increasedstock
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3371HPC
INS300-M3/SSINS300-M4/SSINS300-M5/SSINS300-M6/SSINS300-M8/SSINS300-M10/SSINS300-M12/SS
M3 M5 X 0,5 6 4,6 4,8M4 M6,5 X 0,75 8 5,8 6,2M5 M8 X 1 10 7,1 7,6M6 M10 X 1,5 14 8,6 9,4M8 M12 X 1,5 15 10,6 11,4
M10 M14 X 1,5 18 12,6 13,4M12 M16 X 1,5 22 14,6 15,4
1,53 F
2,69 F
1,73 F
1,98 F
3,25 F
7,84 F
8,04 F
Part numberPrice each
1 to 39Internal thread External thread Length Recommended drill size
ØD1 ØD2 L mini maxi
L
ØD2 ØD1
Self tapping stainless steel insert
- Self tapping insert with fineexternal thread
- Material: stainless steel 303 (exceptfor M10 +M12 threads: stainless steel130F)
.Applications.- For use with aluminium or other
non ferrous metals, thermoplasticsand hardwoods
.Mounting.- Mount the insert in a plain hole
with the aid of a tap, a drill fittedwith a threaded head or anautomatic threading machine.
- The insert should be installed insuch a way that the thread/slot cutsits own thread
- For soft material the initial holeshould be drilled at the minimumrecommended size, for a hardmaterial, at the maximumrecommended size
.Info..- Not sold individually,
contact us for details
INSSSFor hard materials
Excellent
resistance to
being removed
40+-5%
1+List
Qty.Disc.
DISCOUNTS80+
-10%120+-15%
200+On request
stainless steel
�������
Stock*
Increasedstock
*Depending on availability
338 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
50+On request
Cylindrical threaded sleeves
5+-5%
1+List
No. packetsDiscounts
DISCOUNTS
--
MCL5-15/SS/B--
MCL6-10/SS/B-
MCL6-20/SS/BMCL6-25/SS/BMCL6-30/SS/B
----
MCL8-20/SS/BMCL8-25/SS/BMCL8-30/SS/BMCL8-35/SS/BMCL8-40/SS/BMCL8-50/SS/BMCL10-20/SS/BMCL10-25/SS/BMCL10-30/SS/B
-MCL10-40/SS/BMCL10-50/SS/B
---
MCL12-30/SS/B-
MCL12-40/SS/BMCL12-50/SS/B
-
M4M4M5M5M5M6M6M6M6M6M6M6M6M8M8M8M8M8M8M8M10M10M10M10M10M10M10M12M12M12M12M12M12M12
15201520251015202530354050152025303540502025303540506020253035405060
77888
1010101010101010111111111111111313131313131315151515151515
20202020202020202020202020202020202020202020202020202020202020202020
5,54 F
5,90 F
-6,16 F
6,55 F
5,15 F
5,63 F
6,42 F
6,80 F
7,78 F
9,66 F
10,16 F
18,05 F
6,42 F
6,80 F
7,16 F
7,91 F
10,64 F
11,29 F
18,14 F
8,56 F
9,89 F
10,64 F
12,55 F
14,40 F
21,90 F
26,64 F
12,03 F
13,30 F
15,05 F
17,64 F
19,30 F
29,66 F
37,65 F
--
23,98 F
--
20,70 F
-25,14 F
30,44 F
35,57 F
----
33,14 F
35,57 F
43,38 F
47,15 F
52,94 F
66,28 F
41,36 F
51,30 F
60,87 F
-72,00 F
89,93 F
---
80,84 F
-93,52 F
104,41 F
-
??
? ?? ?
Prix Uni.1 à ?
Steel or stainless steelMCL
Thread ØT L ØD
Qtyper packetSteel Stainless steel Steel Stainless steel
- Cylindrical sleeves, through drilled- Suitable for joining threaded bars- Materials:
Blue galvanised steel S300PBStainless steel 303
- Sold by the packet
LØD
ØT
Price per packet1 to 4
20+-10%
MCL4-15/BMCL4-20/B
-MCL5-20/BMCL5-25/BMCL6-10/BMCL6-15/BMCL6-20/BMCL6-25/BMCL6-30/BMCL6-35/BMCL6-40/BMCL6-50/BMCL8-15/BMCL8-20/BMCL8-25/BMCL8-30/BMCL8-35/BMCL8-40/BMCL8-50/BMCL10-20/BMCL10-25/BMCL10-30/BMCL10-35/BMCL10-40/BMCL10-50/BMCL10-60/BMCL12-20/BMCL12-25/BMCL12-30/BMCL12-35/BMCL12-40/BMCL12-50/BMCL12-60/B
Part number
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3391HPC
Threaded bar DIN 975Stainless steel A2 TIF
- Conforms to DIN 975- Material:
Stainless steel: 303/304 - A2- Working temperature up to +430°C
.Uses.- Suitable for harsh environments
.Options.- Stainless steel 316
.Accessories.- Nuts SHN- Stainless steel screws
M2M2,5 M3M4M5M6M8M10M12M14M16M18M20M22M24M27M30M33M36
0,400,450,500,700,801,001,251,501,752,002,002,502,502,503,003,00 3,50 3,50 4,00
1000100010001000100010001000100010001000100010001000100010001000100010001000
�������������------
Length ±10
Thread
Pitch
Part number
TIF-2/SSTIF-2.5/SSTIF-3/SSTIF-4/SSTIF-5/SSTIF-6/SSTIF-8/SSTIF-10/SSTIF-12/SSTIF-14/SSTIF-16/SSTIF-18/SSTIF-20/SSTIF-22/SSTIF-24/SSTIF-27/SSTIF-30/SSTIF-33/SSTIF-36/SS
Thread PitchLength(mm)
Price each1 to 58,91 F
9,77 F
3,55 F
3,53 F
2,45 F
2,71 F
5,08 F
8,14 F
11,74 F
16,15 F19,63 F
28,71 F
31,95 F
42,44 F
45,75 F
69,55 F
87,94 F
111,83 F
118,84 F
Stock*
*Depending on availability
Stainless steel
1+List
6+-15%
20+-20%
40+On request
Qty.Disc.
DISCOUNTS
340 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Shoulder screw ISO 7379Hardened steel Class 12.9HSS
- Shoulder screws, quality class 12.9- For centering as well as holding- Material: Hardened steel 33-38 HRc
(oil-hardened)- Traction resistance 1220N/mm2
- Shear strength 624N/mm2
- Minimum elongation: 8%- Working temperature: -50°C to +300°C- Not sold individually, please contact us for
details
ØSL
H
K
AF
ØM
L+0,00+0,25
B
DK
Chamfer 45°
f9
6+-10%
20+-15%
40+-20%
60+-30%
100+-55%
300+On request
1+List
Qty.Disc.
DISCOUNTS
ØSL68
101216
ØMM5M6M8M10M12
Thread16.9924.0343.7769.38
100.52
Should20.4736.3856.8681.88
145.55
Groove7.62
10.9020.8133.7949.80
Tighteningtorque (Nm)
7.6113.1433.6360.56
120.62
Traction Force (kN)
HSS5-10 M5 10 0,80 9,75 10,22 2,4 Ø6 4,5 3 � 2,53 F
HSS5-12 M5 12 0,80 9,75 10,22 2,4 Ø6 4,5 3 � 2,53 F
HSS5-16 M5 16 0,80 9,75 10,22 2,4 Ø6 4,5 3 � 2,63 F
HSS5-20 M5 20 0,80 9,75 10,22 2,4 Ø6 4,5 3 � 2,63 F
HSS5-25 M5 25 0,80 9,75 10,22 2,4 Ø6 4,5 3 � 2,69 F
HSS5-30 M5 30 0,80 9,75 10,22 2,4 Ø6 4,5 3 � 2,69 F
HSS5-40 M5 40 0,80 9,75 10,22 2,4 Ø6 4,5 3 � 2,73 F
Part numberThread
ØM L Pas b dk k ØsL H AFPrice each
1 to 5-0,010-0,040-0,010-0,040-0,010-0,040-0,010-0,040-0,010-0,040-0,010-0,040-0,010-0,040
*Depending on availability
Stock*
Increasedstock
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3411HPC
HSS
6+-10%
20+-15%
40+-20%
60+-30%
100+-55%
300+On request
1+List
Qty.Disc.
DISCOUNTS
HSS6-12 M6 12 1,00 11,25 13,27 3,3 Ø8 5,5 4 � 2,77 F
HSS6-16 M6 16 1,00 11,25 13,27 3,3 Ø8 5,5 4 � 2,86 F
HSS6-20 M6 20 1,00 11,25 13,27 3,3 Ø8 5,5 4 � 2,94 F
HSS6-25 M6 25 1,00 11,25 13,27 3,3 Ø8 5,5 4 � 2,94 F
HSS6-30 M6 30 1,00 11,25 13,27 3,3 Ø8 5,5 4 � 3,09 F
HSS6-40 M6 40 1,00 11,25 13,27 3,3 Ø8 5,5 4 � 3,18 F
HSS6-50 M6 50 1,00 11,25 13,27 3,3 Ø8 5,5 4 � 3,28 F
HSS8-16 M8 16 1,25 13,25 16,27 4,2 Ø10 7,0 5 � 3,35 F
HSS8-20 M8 20 1,25 13,25 16,27 4,2 Ø10 7,0 5 � 3,35 F
HSS8-25 M8 25 1,25 13,25 16,27 4,2 Ø10 7,0 5 � 3,47 F
HSS8-30 M8 30 1,25 13,25 16,27 4,2 Ø10 7,0 5 � 4,23 F
HSS8-40 M8 40 1,25 13,25 16,27 4,2 Ø10 7,0 5 � 4,48 F
HSS8-50 M8 50 1,25 13,25 16,27 4,2 Ø10 7,0 5 � 4,54 F
HSS8-60 M8 60 1,25 13,25 16,27 4,2 Ø10 7,0 5 � 4,54 F
HSS8-70 M8 70 1,25 13,25 16,27 4,2 Ø10 7,0 5 � 4,98 F
HSS8-80 M8 80 1,25 13,25 16,27 4,2 Ø10 7,0 5 � 3,35 F
HSS10-16 M10 16 1,50 16,4 18,27 4,9 Ø12 8,0 6 � 5,27 F
HSS10-20 M10 20 1,50 16,4 18,27 4,9 Ø12 8,0 6 � 5,36 F
HSS10-25 M10 25 1,50 16,4 18,27 4,9 Ø12 8,0 6 � 5,73 F
HSS10-30 M10 30 1,50 16,4 18,27 4,9 Ø12 8,0 6 � 5,81 F
HSS10-40 M10 40 1,50 16,4 18,27 4,9 Ø12 8,0 6 � 5,71 F
HSS10-50 M10 50 1,50 16,4 18,27 4,9 Ø12 8,0 6 � 6,30 F
HSS10-60 M10 60 1,50 16,4 18,27 4,9 Ø12 8,0 6 � 7,76 F
HSS10-70 M10 70 1,50 16,4 18,27 4,9 Ø12 8,0 6 � 8,24 F
HSS10-80 M10 80 1,50 16,4 18,27 4,9 Ø12 8,0 6 - 10,64 F
HSS10-90 M10 90 1,50 16,4 18,27 4,9 Ø12 8,0 6 - 12,20 F
HSS10-100 M10 100 1,50 16,4 18,27 4,9 Ø12 8,0 6 - 14,50 F
HSS12-30 M12 30 1,75 18,4 24,33 6,6 Ø16 10,0 8 � 9,94 F
HSS12-40 M12 40 1,75 18,4 24,33 6,6 Ø16 10,0 8 � 10,74 F
HSS12-50 M12 50 1,75 18,4 24,33 6,6 Ø16 10,0 8 � 11,17 F
HSS12-60 M12 60 1,75 18,4 24,33 6,6 Ø16 10,0 8 � 13,29 F
HSS12-70 M12 70 1,75 18,4 24,33 6,6 Ø16 10,0 8 - 13,82 F
HSS12-80 M12 80 1,75 18,4 24,33 6,6 Ø16 10,0 8 - 14,99 F
HSS12-90 M12 90 1,75 18,4 24,33 6,6 Ø16 10,0 8 - 16,37 F
HSS12-120 M12 120 1,75 18,4 24,33 6,6 Ø16 10,0 8 - 27,67 F
Part numberThread
ØM L Pas b dk k ØsL H AFPrice each
1 to 5-0,013-0,049-0,013-0,049-0,013-0,049-0,013-0,049-0,013-0,049-0,013-0,049-0,013-0,049-0,013-0,049-0,013-0,049-0,013-0,049-0,013-0,049-0,013-0,049-0,013-0,049-0,013-0,049-0,013-0,049-0,013-0,049-0,016-0,059-0,016-0,059-0,016-0,059-0,016-0,059-0,016-0,059-0,016-0,059-0,016-0,059-0,016-0,059-0,016-0,059-0,016-0,059-0,016-0,059-0,016-0,059-0,016-0,059-0,016-0,059-0,016-0,059-0,016-0,059-0,016-0,059-0,016-0,059-0,016-0,059
*Depending on availability
Stock*
342 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
5,43 F
5,43 F
5,43 F
5,43 F
5,43 F
SHS3-4SHS3-5SHS3-6SHS3-8SHS3-10
M3M3M3M3M3
3,9873,9873,9873,9873,987
4,0135,0136,0138,013
10,013
66666
33333
44444
2,02,02,02,02,0
1,6 1,61,6 1,6 1,6
�����
Part number
ThreadØM SD SL HD HL TL KS KD
Price each1 to 5Stock*
*Depending on availability
Shoulder screw
ØSD
HL
KD
KS
ØM
SL+0,05-0,00
TL
HD
+0,000-0,025
Chamfer 45°
Stainless steel 303 550 N/mm2SHS
- Material: Stainless steel 303- For centering as well as holding- Working temperature up to +430°C- Hexagonal socket head- Traction resistance: 550N/mm2
- Not sold individually, please contact usfor details
.Uses.- For use in harsh environments stainless steel
6+-10%
20+-15%
40+-20%
60+-30%
100+-55%
300+On request
1+List
Qty.Disc.
DISCOUNTS
Increasedstock
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3431HPC
5,43 F
5,43 F
5,43 F
5,43 F
5,43 F
6,17 F
6,17 F
6,17 F
6,17 F
7,72 F
7,72 F
5,43 F
5,43 F
5,43 F
5,43 F
5,43 F
6,17 F
6,17 F
8,24 F
8,90 F
8,90 F
8,90 F
8,90 F
8,90 F
8,90 F
8,90 F
8,90 F
8,90 F
11,30 F
11,30 F
15,44 F
15,44 F
15,44 F
15,44 F
11,15 F
11,15 F
11,15 F
11,15 F
15,88 F
15,88 F
19,35 F
19,35 F
19,35 F
19,35 F
31,27 F
SHS4-4SHS4-5SHS4-6SHS4-8SHS4-10SHS4-12SHS4-14SHS4-16SHS4-20SHS4-25SHS4-30SHS5-4SHS5-5SHS5-6SHS5-8SHS5-10SHS5-12SHS5-14SHS5-16SHS5-20SHS5-25SHS5-30SHS6-6SHS6-8SHS6-10SHS6-12SHS6-16SHS6-20SHS6-25SHS6-30SHS6.1-8SHS6.1-10SHS6.1-12SHS6.1-16SHS8-8SHS8-10SHS8-12SHS8-16SHS8-25SHS8-30SHS10-12SHS10-16SHS10-20SHS10-25SHS10-30
M4M4M4M4M4M4M4M4M4M4M4M5M5M5M5M5M5M5M5M5M5M5M6M6M6M6M6M6M6M6M6M6M6M6M8M8M8M8M8M8M10M10M10M10M10
4,9874,9874,9874,9874,9874,9874,9874,9874,9874,9874,9875,9875,9875,9875,9875,9875,9875,9875,9875,9875,9875,9877,9877,9877,9877,9877,9877,9877,9877,9879,9879,9879,9879,9879,9879,9879,9879,9879,9879,987
11,98711,98711,98711,98711,987
4,0135,0136,0138,013
10,01312,01314,01316,01320,01325,01330,013
4,0135,0136,0138,013
10,01312,01314,01316,01320,01325,01330,013
6,0138,013
10,01312,01316,01320,01325,01330,013
8,01310,01312,01316,013
8,01310,01312,01316,01325,01330,01312,01316,01320,01325,01330,013
88888888888
10101010101010101010101212121212121212121212121414141414142020202020
444444444445555555555566666666666677777788888
55555555555666666666661111111111111111111111111212121212121616161616
2,52,52,52,52,52,52,52,52,52,52,53,03,03,03,03,03,03,03,03,03,03,04,04,04,04,04,04,04,04,04,04,04,04,05,05,05,05,05,05,06,06,06,06,06,0
2,0 2,0 2,0 2,0 2,0 2,0 2,0 2,0 2,0 2,0 2,0 2,42,42,42,42,42,42,42,42,42,42,43,23,23,23,23,23,23,23,23,23,23,23,24,04,04,04,04,04,04,84,84,84,84,8
������������������������������----����������-
Part numberThread
ØM SD SL HD HL TL KS KDPrice each
1 to 5Stock*
*Depending on availability
SHS
6+-10%
20+-15%
40+-20%
60+-30%
100+-55%
300+On request
1+List
Qty.Disc.
DISCOUNTS
344 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Shoulder screwPre-treated stainless steel 416 850-1000N/mm2
ØSD
HL
KD
KS
ØM
SL+0,05-0,00
TL
HD
+0,000-0,025
SHSS
SHSS3-4SHSS3-5SHSS3-6SHSS3-8SHSS3-10
M3M3M3M3M3
3,9873.9873,9873,9873,987
4,0135,0136,0138,01310,013
66666
33333
44444
2,02,02,02,02,0
1,61,61,61,61,6
�����
Part numberThread
ØM SD SL HD HL TL KS KDPrice each
1 to 5
- Material: pre-treated stainless steel 41626-32 HRc
- For centering as well as holding- Working temperature up to +430°C- Hexagonal socket head - Traction resistance 850-1000 N/mm2
.Uses.- For use in harsh environments
Chamfer 45°
Stock*
*Depending on availability
12,72 F
12,72 F
12,72 F
12,72 F
12,72 F
pre-treated
stainless steel
6+-10%
20+-15%
40+-20%
60+-30%
100+-55%
300+On request
1+List
Qty.Disc.
DISCOUNTS
Increasedstock
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3451HPC
M4M4M4M4M4M4M4M4M4M4M4M5M5M5M5M5M5M5M5M5M5M5M6M6M6M6M6M6M6M6M6M6M6M6M8M8M8M8M8M8M8M10M10M10M10M10
4,9874,9874,9874,9874,9874,9874,9874,9874,9874,9874,9875,9875,9875,9875,9875,9875,9875,9875,9875,9875,9875,9877,9877,987 7,9877,9877,9877,9877,9877,9879,9879,9879,9879,9879,9879,9879,9879,9879,9879,9879,98711,98711,98711,98711,98711,987
4,0135,0136,0138,01310,01312,01314,01316,01320,01325,01330,0134,0135,0136,0138,01310,01312,01314,01316,01320,01325,01330,0136,0138,01310,01312,01316,01320,01325,01330,0138,01310,01312,01316,0138,01310,01312,01316,01320,01325,01330,01312,01316,01320,01325,01330,013
88888888888
1010101010101010101010121212121212121212121212141414141414142020202020
4444444444455555555555666666666666777777788888
5555555555566666666666111111111111111111111111121212121212121616161616
2,52,52,52,52,52,52,52,52,52,52,53,03,03,03,03,03,03,03,03,03,03,04,04,04,04,04,04,04,04,04,04,04,04,05,05,05,05,05,05,05,06,06,06,06,06,0
2,02,02,02,02,02,02,02,02,02,02,02,42,42,42,42,42,42,42,42,42,42,43,23,23,23,23,23,23,23,23,23,23,23,24,04,04,04,04,04,04,04,84,84,84,84,8
��-��������-����������������-------����--����-
SHSS4-4SHSS4-5SHSS4-6SHSS4-8SHSS4-10SHSS4-12SHSS4-14SHSS4-16SHSS4-20SHSS4-25SHSS4-30SHSS5-4SHSS5-5SHSS5-6SHSS5-8SHSS5-10SHSS5-12SHSS5-14SHSS5-16SHSS5-20SHSS5-25SHSS5-30SHSS6-6SHSS6-8SHSS6-10SHSS6-12SHSS6-16SHSS6-20SHSS6-25SHSS6-30SHSS6.1-8SHSS6.1-10SHSS6.1-12SHSS6.1-16SHSS8-8SHSS8-10SHSS8-12SHSS8-16SHSS8-20SHSS8-25SHSS8-30SHSS10-12SHSS10-16SHSS10-20SHSS10-25SHSS10-30
Part numberThread
ØM SD SL HD HL TL KS KDPrice each
1 to 5Stock*
SHSS
*Depending on availability
12,72 F
12,72 F
12,72 F
12,72 F
12,72 F
14,52 F
14,52 F
14,52 F
14,52 F
18,13 F
18,13 F
12,72 F
12,72 F
12,72 F
12,72 F
12,72 F
14,52 F
14,52 F
14,52 F
20,84 F
20,84 F
20,84 F
15,53 F
15,53 F
15,53 F
15,53 F
15,53 F
15,53 F
15,53 F
15,53 F
16,86 F
16,86 F
16,86 F
20,23 F
19,38 F
19,38 F
31,65 F
23,70 F
23,70 F
27,34 F
23,70 F
23,86 F
28,74 F
23,86 F
23,86 F
44,24 F
6+-10%
20+-15%
40+-20%
60+-30%
100+-55%
300+On request
1+List
Qty.Disc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3471HPC
Slotted cheese head screwNatural nylon 6.6 TCN
- Dimensional tolerances are similar to IS1207, NF E25-127, DIN84
- Sold by the packet
H
ØM F
ØD
L
TC3-5/N/BTC3-6/N/BTC3-8/N/BTC3-10/N/BTC3-12/N/BTC3-16/N/BTC3-20/N/BTC3-25/N/BTC4-6/N/BTC4-8/N/BTC4-10/N/BTC4-12/N/BTC4-16/N/BTC4-20/N/BTC4-25/N/BTC4-30/N/BTC5-8/N/BTC5-10/N/BTC5-16/N/BTC5-20/N/BTC5-25/N/BTC5-30/N/BTC5-40/N/BTC6-10/N/BTC6-12/N/BTC6-16/N/BTC6-20/N/BTC6-25/N/BTC6-30/N/BTC6-40/N/BTC6-50/N/BTC6-60/N/B
M3x0,5M3x0,5M3x0,5M3x0,5M3x0,5M3x0,5M3x0,5M3x0,5M4x0,7M4x0,7M4x0,7M4x0,7M4x0,7M4x0,7M4x0,7M4x0,7M5x0,8M5x0,8M5x0,8M5x0,8M5x0,8M5x0,8M5x0,8M6x1,0M6x1,0M6x1,0M6x1,0M6x1,0M6x1,0M6x1,0M6x1,0M6x1,0
568
1012162025
68
101216202530
8101620253040101216202530405060
5,55,55,55,55,55,55,55,57,07,07,07,07,07,07,07,08,58,58,58,58,58,58,5
10,010,010,010,010,010,010,010,010,0
2,02,02,02,02,02,02,02,02,62,62,62,62,62,62,62,63,33,33,33,33,33,33,33,93,93,93,93,93,93,93,93,9
0,80,80,80,80,80,80,80,81,21,21,21,21,21,21,21,21,21,21,21,21,21,21,21,61,61,61,61,61,61,61,61,6
200200200200200200200200200200200200200200200200200200200200200200200200200200200200200100100100
����--��--�-��-�-�����-�--������
9,57 F
6,80 F
6,83 F
6,36 F
6,95 F
9,57 F
7,13 F
10,39 F
7,08 F
7,23 F
6,77 F
7,37 F
7,54 F
7,73 F
10,53 F
10,94 F
14,34 F
7,89 F
8,14 F
8,91 F
9,75 F
16,68 F
17,40 F
10,60 F
12,38 F
13,74 F
15,59 F
22,51 F
12,45 F
14,03 F
12,81 F
15,05 F
Part number ØM L ØD H FQuantity
per packetPrice per
packetStock*
*Depending on availability
11+On request
6+-10%
1+List
No. packetsDiscounts
DISCOUNTS
348 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Nylon washer DIN 125Natural nylon 6.6SHWN
- Complies with DIN125- Material: natural nylon 6.6 - Dimensional tolerances are similar
to international standards
.Info..- Sold by the packet
H
ØdØD
SHW-3/N/BSHW-4/N/BSHW-5/N/BSHW-6/N/B
M3M4M5M6
3,24,35,36,4
791012
0,50,81,01,6
200200200200
����
4,91 F
4,33 F
4,97 F
5,15 F
Part numberFor
screw Ød ØD HQuantity
per packetPrice per
packet
*Depending on availability
Stock*
11+On request
6+-10%
1+List
No. packetsDisc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3491HPC
Hexagonal nylon nut
- Dimensional tolerances are similar toNF E 2403, ISO 4032, DIN 555, DIN 934
- Sold by the packet
S
ØT
H
SHN-3/N/BSHN-4/N/BSHN-5/N/BSHN-6/N/B
M3x0,5M4x0,7M5x0,8M6x1,0
2,43,24,25,0
5,57,08,0
10,0
200200200200
����
7,83 F
6,77 F
10,22 F
7,78 F
Part number ØT H SQuantity per
packetPrice per
packet
*Depending on availability
Stock*
Natural nylon 6.6 SHNN
10+-10%
20+On request
1+List
No. packetsDiscounts
DISCOUNTS
350 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
CHC1,6-4/B M1,6 4 0,35 4 3,00 1,60 1,50 200 - 78,74 F
CHC1,6-6/B M1,6 6 0,35 6 3,00 1,60 1,50 200 � 78,74 F
CHC2-4/B M2 4 0,40 4 3,80 2,00 1,50 200 � 25,09 F
CHC2-5/B M2 5 0,40 5 3,80 2,00 1,50 200 - 25,09 F
CHC2-6/B M2 6 0,40 6 3,80 2,00 1,50 200 � 25,09 F
CHC2-8/B M2 8 0,40 8 3,80 2,00 1,50 200 � 25,01 F
CHC2-10/B M2 10 0,40 10 3,80 2,00 1,50 200 � 25,42 F
CHC2-12/B M2 12 0,40 12 3,80 2,00 1,50 200 � 26,22 F
CHC2,5-5/B M2,5 5 0,45 5 4,50 2,50 2,00 200 - 23,72 F
CHC2,5-6/B M2,5 6 0,45 6 4,50 2,50 2,00 200 � 23,68 F
CHC2,5-8/B M2,5 8 0,45 8 4,50 2,50 2,00 200 - 25,35 F
CHC2,5-10/B M2,5 10 0,45 10 4,50 2,50 2,00 200 � 26,96 F
CHC2,5-12/B M2,5 12 0,45 12 4,50 2,50 2,00 200 � 29,00 F
CHC3-6/B M3 6 0,50 6 5,68 3,00 2,50 200 � 14,80 F
CHC3-8/B M3 8 0,50 8 5,68 3,00 2,50 200 � 12,08 F
CHC3-10/B M3 10 0,50 10 5,68 3,00 2,50 200 � 9,27 F
CHC3-12/B M3 12 0,50 12 5,68 3,00 2,50 200 � 9,46 F
CHC3-16/B M3 16 0,50 16 5,68 3,00 2,50 200 � 10,65 F
CHC3-20/B M3 20 0,50 20 5,68 3,00 2,50 200 � 10,83 F
CHC3-25/B M3 25 0,50 25 5,68 3,00 2,50 200 - 12,08 F
CHC3-30/B M3 30 0,50 30 5,68 3,00 2,50 200 � 13,58 F
CHC3-35/B M3 35 0,50 35 5,68 3,00 2,50 200 - 96,70 F
Part numberThread
ØMTotal
length L Pitch B DK K SQty perpacket
Price perpacket
*Depending on availability
Stock*
Socket-head screw DIN 912CHC Steel quality class 12.9
DK
K
B
L
ØM
SC1
t1a
Ød
Nominal Cylindrical screwdiameter C1 t1a t1b
d min. min. min.M1.6 05 01.7 1.2M2.0 06 02.1 1.5M2.5 07 02.7 1.8M3.0 08 03.2 2.1M4.0 10 04.2 3.0M5.0 11 05.3 3.7M6.0 13 06.3 4.2M8.0 18 08.4 5.3M10. 20 10.5 6.3M12. 22 12.6 7.4
Designer’s Note
- Conforms to ISO 4762 and DIN 912- Screw quality class 12.9- Material: Hardened steel 39-44 HRc
(oil-hardened)- Tensile strength: 1220N/mm2
- Elastic limit: 1100N/mm2
- Shear strength: 732N/mm2
- Max. locking torque: CHC3 = 2 Nm, CHC4 = 4.6 Nm,CHC5 = 9 Nm, CHC6 = 15.7 Nm
- Sold by the packet
6+-10%
20+-20%
50+On request
1+List
No. packetsDiscounts
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3511HPC*Depending on availability
CHC
Part numberThread
ØMTotal
length L Pitch B DK K SQty perpacket
Price perpacket
CHC4-6/B M4 6 0,70 6 7,22 4 3 200 - 16,97 F
CHC4-8/B M4 8 0,70 8 7,22 4 3 200 � 16,97 F
CHC4-10/B M4 10 0,70 10 7,22 4 3 200 � 11,96 F
CHC4-12/B M4 12 0,70 12 7,22 4 3 200 � 12,25 F
CHC4-14/B M4 14 0,70 14 7,22 4 3 200 - 15,60 F
CHC4-16/B M4 16 0,70 16 7,22 4 3 200 � 10,59 F
CHC4-20/B M4 20 0,70 20 7,22 4 3 200 � 11,96 F
CHC4-25/B M4 25 0,70 25 7,22 4 3 200 � 13,83 F
CHC4-30/B M4 30 0,70 20 7,22 4 3 200 � 15,00 F
CHC4-35/B M4 35 0,70 20 7,22 4 3 200 � 17,96 F
CHC4-40/B M4 40 0,70 20 7,22 4 3 200 � 20,24 F
CHC4-45/B M4 45 0,70 20 7,22 4 3 200 - 24,13 F
CHC4-50/B M4 50 0,70 20 7,22 4 3 200 � 24,13 F
CHC5-8/B M5 8 0,80 8 8,72 5 4 200 � 14,54 F
CHC5-10/B M5 10 0,80 10 8,72 5 4 200 � 13,83 F
CHC5-12/B M5 12 0,80 12 8,72 5 4 200 � 12,76 F
CHC5-16/B M5 16 0,80 16 8,72 5 4 200 � 11,15 F
CHC5-18/B M5 18 0,80 18 8,72 5 4 200 - 13,66 F
CHC5-20/B M5 20 0,80 20 8,72 5 4 200 � 13,66 F
CHC5-25/B M5 25 0,80 20 8,72 5 4 200 � 13,58 F
CHC5-30/B M5 30 0,80 22 8,72 5 4 200 � 14,62 F
CHC5-35/B M5 35 0,80 22 8,72 5 4 100 � 7,69 F
CHC5-40/B M5 40 0,80 22 8,72 5 4 100 � 8,71 F
CHC5-45/B M5 45 0,80 22 8,72 5 4 100 - 10,24 F
CHC5-50/B M5 50 0,80 22 8,72 5 4 100 � 12,12 F
CHC5-55/B M5 55 0,80 22 8,72 5 4 100 - 15,70 F
CHC5-60/B M5 60 0,80 22 8,72 5 4 100 - 17,99 F
CHC5-70/B M5 70 0,80 22 8,72 5 4 100 - 48,01 F
CHC6-8/B M6 8 1,00 8 10,22 6 5 200 � 24,13 F
CHC6-10/B M6 10 1,00 10 10,22 6 5 200 � 18,85 F
CHC6-12/B M6 12 1,00 12 10,22 6 5 200 � 17,47 F
CHC6-14/B M6 14 1,00 14 10,22 6 5 200 - 19,64 F
CHC6-16/B M6 16 1,00 16 10,22 6 5 200 � 13,36 F
CHC6-18/B M6 18 1,00 18 10,22 6 5 200 - 20,35 F
CHC6-20/B M6 20 1,00 20 10,22 6 5 200 � 13,83 F
CHC6-25/B M6 25 1,00 25 10,22 6 5 200 � 14,62 F
CHC6-30/B M6 30 1,00 35 10,22 6 5 200 � 15,43 F
CHC6-35/B M6 35 1,00 24 10,22 6 5 100 � 9,56 F
CHC6-40/B M6 40 1,00 24 10,22 6 5 200 � 20,24 F
CHC6-45/B M6 45 1,00 24 10,22 6 5 100 - 11,48 F
CHC6-50/B M6 50 1,00 24 10,22 6 5 100 - 11,88 F
CHC6-55/B M6 55 1,00 24 10,22 6 5 100 - 15,19 F
CHC6-60/B M6 60 1,00 24 10,22 6 5 100 - 16,48 F
CHC6-65/B M6 65 1,00 24 10,22 6 5 100 - 19,26 F
CHC6-70/B M6 70 1,00 24 10,22 6 5 100 - 19,26 F
CHC6-80/B M6 80 1,00 24 10,22 6 5 100 - 23,90 F
CHC6-90/B M6 90 1,00 24 10,22 6 5 100 - 38,40 F
CHC6-100/B M6 100 1,00 24 10,22 6 5 100 - 42,47 F
CHC6-110/B M6 110 1,00 24 10,22 6 5 100 - 61,78 F
Stock*
352 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
CHC8-12/B M8 12 1,25 12 13,27 8 6 200 - 29,16 F
CHC8-14/B M8 14 1,25 14 13,27 8 6 200 - 27,33 F
CHC8-16/B M8 16 1,25 16 13,27 8 6 200 � 21,69 F
CHC8-18/B M8 18 1,25 18 13,27 8 6 200 - 27,33 F
CHC8-20/B M8 20 1,25 20 13,27 8 6 200 � 22,18 F
CHC8-22/B M8 22 1,25 22 13,27 8 6 200 - 123,03 F
CHC8-25/B M8 25 1,25 25 13,27 8 6 200 � 24,35 F
CHC8-30/B M8 30 1,25 30 13,27 8 6 200 � 26,64 F
CHC8-35/B M8 35 1,25 35 13,27 8 6 100 � 15,10 F
CHC8-40/B M8 40 1,25 28 13,27 8 6 100 � 16,50 F
CHC8-45/B M8 45 1,25 28 13,27 8 6 100 - 18,40 F
CHC8-50/B M8 50 1,25 28 13,27 8 6 100 � 18,34 F
CHC8-55/B M8 55 1,25 28 13,27 8 6 100 - 21,94 F
CHC8-60/B M8 60 1,25 28 13,27 8 6 100 � 23,47 F
CHC8-65/B M8 65 1,25 28 13,27 8 6 100 - 31,38 F
CHC8-70/B M8 70 1,25 28 13,27 8 6 100 - 31,45 F
CHC8-80/B M8 80 1,25 28 13,27 8 6 100 - 37,47 F
CHC8-90/B M8 90 1,25 28 13,27 8 6 50 - 19,78 F
CHC8-100/B M8 100 1,25 28 13,27 8 6 50 - 22,81 F
CHC8-110/B M8 110 1,25 28 13,27 8 6 50 - 55,04 F
CHC8-120/B M8 120 1,25 28 13,27 8 6 50 - 60,85 F
CHC8-130/B M8 130 1,25 28 13,27 8 6 50 - 66,69 F
CHC8-140/B M8 140 1,25 28 13,27 8 6 50 - 79,55 F
CHC8-150/B M8 150 1,25 28 13,27 8 6 50 - 90,27 F
Part number ThreadØM
Totallength L Pitch B DK K S
Qty perpacket
Price perpacket
*Depending on availability
Stock*
Socket-head screw DIN 912CHC Steel quality class 12.9
DK
K
B
L
ØM
SC1
t1a
Ød
Nominal Cylindrical screwdiameter C1 t1a t1b
d min. min. mini-.M1.6 05 01.7 1.2M2.0 06 02.1 1.5M2.5 07 02.7 1.8M3.0 08 03.2 2.1M4.0 10 04.2 3.0M5.0 11 05.3 3.7M6.0 13 06.3 4.2M8.0 18 08.4 5.3M10. 20 10.5 6.3M12. 22 12.6 7.4
Designer’s Note
- Conforms to ISO 4762 and DIN 912- Screw quality class 12.9- Material: Hardened steel 39-44 HRc (oil-hardened)- Tensile strength: 1220N/mm2
- Elastic limit: 1100N/mm2
- Shear strength: 732N/mm2
- Max. locking torque: CHC3 = 2 Nm, CHC4 = 4.6 Nm,CHC5 = 9 Nm, CHC6 = 15.7 Nm
- Sold by the packet
6+-10%
20+-20%
50+On request
1+List
No. packetsDiscounts
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3531HPC
Part numberThread
ØMTotal
length L Pitch B DK K SQty perpacket
Price perpacket
CHC10-16/B M10 16 1,50 16 16,27 10 8 100 - 23,29 F
CHC10-18/B M10 18 1,50 18 16,27 10 8 100 - 75,32 F
CHC10-20/B M10 20 1,50 20 16,27 10 8 100 - 20,80 F
CHC10-22/B M10 22 1,50 22 16,27 10 8 100 - 75,32 F
CHC10-25/B M10 25 1,50 25 16,27 10 8 100 - 22,24 F
CHC10-30/B M10 30 1,50 30 16,27 10 8 100 � 23,47 F
CHC10-35/B M10 35 1,50 35 16,27 10 8 100 - 25,67 F
CHC10-40/B M10 40 1,50 40 16,27 10 8 100 - 27,54 F
CHC10-45/B M10 45 1,50 32 16,27 10 8 100 - 30,59 F
CHC10-50/B M10 50 1,50 32 16,27 10 8 100 � 28,97 F
CHC10-55/B M10 55 1,50 32 16,27 10 8 100 - 36,69 F
CHC10-60/B M10 60 1,50 32 16,27 10 8 100 - 39,51 F
CHC10-65/B M10 65 1,50 32 16,27 10 8 50 - 22,64 F
CHC10-70/B M10 70 1,50 32 16,27 10 8 50 - 22,67 F
CHC10-80/B M10 80 1,50 32 16,27 10 8 50 - 25,42 F
CHC10-90/B M10 90 1,50 32 16,27 10 8 50 - 32,17 F
CHC10-100/B M10 100 1,50 32 16,27 10 8 50 - 37,58 F
CHC10-110/B M10 110 1,50 32 16,27 10 8 50 - 40,01 F
CHC10-120/B M10 120 1,50 32 16,27 10 8 50 - 45,23 F
CHC10-130/B M10 130 1,50 32 16,27 10 8 50 - 68,04 F
CHC10-140/B M10 140 1,50 32 16,27 10 8 50 - 83,23 F
CHC10-150/B M10 150 1,50 32 16,27 10 8 50 - 141,24 F
CHC10-160/B M10 160 1,50 32 16,27 10 8 25 - 116,76 F
CHC10-180/B M10 180 1,50 32 16,27 10 8 25 - 155,14 F
CHC10-200/B M10 200 1,50 32 16,27 10 8 25 - 243,52 F
CHC12-20/B M12 20 1,75 20 18,27 12 10 50 - 18,34 F
CHC12-25/B M12 25 1,75 25 18,27 12 10 50 - 15,34 F
CHC12-30/B M12 30 1,75 30 18,27 12 10 50 � 16,48 F
CHC12-35/B M12 35 1,75 35 18,27 12 10 50 - 17,96 F
CHC12-40/B M12 40 1,75 40 18,27 12 10 50 - 19,32 F
CHC12-45/B M12 45 1,75 45 18,27 12 10 50 - 21,13 F
CHC12-50/B M12 50 1,75 36 18,27 12 10 50 - 22,96 F
CHC12-55/B M12 55 1,75 36 18,27 12 10 50 - 25,31 F
CHC12-60/B M12 60 1,75 36 18,27 12 10 50 � 27,27 F
CHC12-65/B M12 65 1,75 36 18,27 12 10 50 - 30,99 F
CHC12-70/B M12 70 1,75 36 18,27 12 10 50 - 30,99 F
CHC12-80/B M12 80 1,75 36 18,27 12 10 50 - 34,88 F
CHC12-90/B M12 90 1,75 36 18,27 12 10 50 - 40,01 F
CHC12-100/B M12 100 1,75 36 18,27 12 10 50 - 46,53 F
CHC12-110/B M12 110 1,75 36 18,27 12 10 50 - 51,74 F
CHC12-120/B M12 120 1,75 36 18,27 12 10 50 - 58,65 F
CHC12-130/B M12 130 1,75 36 18,27 12 10 50 - 94,09 F
CHC12-140/B M12 140 1,75 36 18,27 12 10 50 - 100,98 F
CHC12-150/B M12 150 1,75 36 18,27 12 10 50 - 144,57 F
CHC12-160/B M12 160 1,75 36 18,27 12 10 25 - 94,84 F
CHC12-180/B M12 180 1,75 36 18,27 12 10 25 - 144,46 F
CHC12-200/B M12 200 1,75 36 18,27 12 10 25 - 162,54 F
CHC
*Depending on availability
Stock*
354 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Part numberThreadØM Pitch
Totallength L B DK K S
Qty perpacket
Price perpacket
*Depending on availability
Stock*
Socket-head screw DIN 912
- Conforms to ISO 4762 and DIN 912- Material: Stainless steel 302/304 - A2- Hexagonal socket- Sold by the packet
.Uses.- Suitable for harsh environments
DK
K
B
L
ØM
S
CHCSS Stainless steel A2
6+-5%
10+On request
1+List
No. packetsDiscounts
DISCOUNTS
stainless steel
CHC1,6-5/SS/B M1,6 0,35 5 - 3,0 1,6 1,5 200 - 66,98 FCHC1,6-8/SS/B M1,6 0,35 8 - 3,0 1,6 1,5 200 � 69,69 FCHC1,6-10/SS/B M1,6 0,35 10 - 3,0 1,6 1,5 200 � 78,02 FCHC2-4/SS/B M2 0,40 4 - 3,8 2,0 1,5 500 - 83,19 FCHC2-5/SS/B M2 0,40 5 - 3,8 2,0 1,5 500 � 67,14 FCHC2-6/SS/B M2 0,40 6 - 3,8 2,0 1,5 500 � 68,24 FCHC2-8/SS/B M2 0,40 8 - 3,8 2,0 1,5 500 � 72,74 FCHC2-10/SS/B M2 0,40 10 - 3,8 2,0 1,5 500 � 76,83 FCHC2-12/SS/B M2 0,40 12 - 3,8 2,0 1,5 500 � 113,11 FCHC2-20/SS/B M2 0,40 20 - 3,8 2,0 1,5 500 � 126,09 FCHC2,5-4/SS/B M2,5 0,45 4 - 4,5 2,5 2,0 500 - 102,98 FCHC2,5-5/SS/B M2,5 0,45 5 - 4,5 2,5 2,0 500 - 68,24 FCHC2,5-6/SS/B M2,5 0,45 6 - 4,5 2,5 2,0 500 - 76,83 FCHC2,5-8/SS/B M2,5 0,45 8 - 4,5 2,5 2,0 500 � 82,06 FCHC2,5-10/SS/B M2,5 0,45 10 - 4,5 2,5 2,0 500 - 87,25 FCHC2,5-16/SS/B M2,5 0,45 16 - 4,5 2,5 2,0 500 � 98,87 FCHC2,5-20/SS/B M2,5 0,45 20 - 4,5 2,5 2,0 500 � 128,33 FCHC3-6/SS/B M3 0,50 6 - 5,5 3,0 2,5 1000 � 43,70 FCHC3-8/SS/B M3 0,50 8 - 5,5 3,0 2,5 1000 � 45,54 FCHC3-10/SS/B M3 0,50 10 - 5,5 3,0 2,5 1000 � 47,68 FCHC3-12/SS/B M3 0,50 12 - 5,5 3,0 2,5 1000 � 72,75 FCHC3-16/SS/B M3 0,50 16 - 5,5 3,0 2,5 1000 � 53,81 FCHC3-20/SS/B M3 0,50 20 - 5,5 3,0 2,5 1000 � 58,68 FCHC3-25/SS/B M3 0,50 25 18 5,5 3,0 2,5 1000 � 106,38 FCHC3-30/SS/B M3 0,50 30 18 5,5 3,0 2,5 1000 � 85,29 FCHC3-35/SS/B M3 0,50 35 18 5,5 3,0 2,5 500 - 102,60 FCHC4-6/SS/B M4 0,70 6 - 7,0 4,0 3,0 500 � 29,06 FCHC4-8/SS/B M4 0,70 8 - 7,0 4,0 3,0 500 � 21,22 FCHC4-10/SS/B M4 0,70 10 - 7,0 4,0 3,0 500 � 28,10 F
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3551HPC
Part numberThreadØM Pitch
Totallength L B DK K S
Qty perpacket
Price perpacketStock*
*Depending on availability
CHCSS
CHC4-12/SS/B M4 0,70 12 - 7,0 4 3 500 � 32,08 FCHC4-16/SS/B M4 0,70 16 - 7,0 4 3 500 � 21,95 FCHC4-20/SS/B M4 0,70 20 - 7,0 4 3 500 � 29,56 FCHC4-25/SS/B M4 0,70 25 - 7,0 4 3 500 � 33,92 FCHC4-30/SS/B M4 0,70 30 20 7,0 4 3 500 � 45,48 FCHC4-35/SS/B M4 0,70 35 20 7,0 4 3 500 � 39,51 FCHC4-40/SS/B M4 0,70 40 20 7,0 4 3 500 � 62,96 FCHC4-50/SS/B M4 0,70 50 20 7,0 4 3 200 � 30,85 FCHC5-8/SS/B M5 0,80 8 - 8,5 5 4 500 � 40,50 FCHC5-10/SS/B M5 0,80 10 - 8,5 5 4 500 � 35,99 FCHC5-12/SS/B M5 0,80 12 - 8,5 5 4 500 � 38,20 FCHC5-16/SS/B M5 0,80 16 - 8,5 5 4 500 � 43,55 FCHC5-20/SS/B M5 0,80 20 - 8,5 5 4 500 � 49,98 FCHC5-25/SS/B M5 0,80 25 - 8,5 5 4 500 � 48,16 FCHC5-30/SS/B M5 0,80 30 22 8,5 5 4 500 � 63,42 FCHC5-35/SS/B M5 0,80 35 22 8,5 5 4 500 � 61,65 FCHC5-40/SS/B M5 0,80 40 22 8,5 5 4 500 � 83,01 FCHC5-50/SS/B M5 0,80 50 22 8,5 5 4 200 � 43,42 FCHC6-8/SS/B M6 1,00 8 - 10,0 6 5 500 � 47,36 FCHC6-10/SS/B M6 1,00 10 - 10,0 6 5 500 � 54,32 FCHC6-12/SS/B M6 1,00 12 - 10,0 6 5 500 � 60,37 FCHC6-16/SS/B M6 1,00 16 - 10,0 6 5 500 � 66,49 FCHC6-20/SS/B M6 1,00 20 - 10,0 6 5 500 � 51,58 FCHC6-25/SS/B M6 1,00 25 - 10,0 6 5 500 � 60,20 FCHC6-30/SS/B M6 1,00 30 - 10,0 6 5 500 � 85,08 FCHC6-35/SS/B M6 1,00 35 24 10,0 6 5 500 � 54,44 FCHC6-40/SS/B M6 1,00 40 24 10,0 6 5 500 � 59,28 FCHC6-50/SS/B M6 1,00 50 24 10,0 6 5 500 � 144,46 FCHC6-60/SS/B M6 1,00 60 24 10,0 6 5 500 - 110,24 FCHC6-70/SS/B M6 1,00 70 24 10,0 6 5 500 - 141,41 FCHC6-80/SS/B M6 1,00 80 24 10,0 6 5 100 � 60,78 FCHC6-100/SS/B M6 1,00 100 24 10,0 6 5 100 � 80,33 FCHC8-10/SS/B M8 1,25 10 - 13,0 8 6 200 - 36,66 FCHC8-16/SS/B M8 1,25 16 - 13,0 8 6 200 � 48,90 FCHC8-20/SS/B M8 1,25 20 - 13,0 8 6 200 � 50,43 FCHC8-25/SS/B M8 1,25 25 - 13,0 8 6 200 � 55,92 FCHC8-30/SS/B M8 1,25 30 - 13,0 8 6 200 � 58,38 FCHC8-35/SS/B M8 1,25 35 - 13,0 8 6 200 � 74,57 FCHC8-40/SS/B M8 1,25 40 28 13,0 8 6 200 � 91,72 FCHC8-50/SS/B M8 1,25 50 28 13,0 8 6 200 � 96,42 FCHC8-60/SS/B M8 1,25 60 28 13,0 8 6 200 � 116,78 FCHC8-70/SS/B M8 1,25 70 28 13,0 8 6 200 - 76,34 FCHC8-80/SS/B M8 1,25 80 28 13,0 8 6 200 - 178,75 FCHC10-16/SS/B M10 1,50 16 - 16,0 10 8 100 - 35,40 FCHC10-20/SS/B M10 1,50 20 - 16,0 10 8 100 � 34,49 FCHC10-25/SS/B M10 1,50 25 - 16,0 10 8 100 � 44,37 FCHC10-30/SS/B M10 1,50 30 - 16,0 10 8 100 � 52,87 FCHC10-40/SS/B M10 1,50 40 - 16,0 10 8 100 � 61,89 FCHC10-50/SS/B M10 1,50 50 32 16,0 10 8 100 � 36,96 FCHC12-20/SS/B M12 1,75 20 - 18,0 12 10 100 - 37,11 FCHC12-30/SS/B M12 1,75 30 - 18,0 12 10 100 - 40,61 FCHC12-40/SS/B M12 1,75 40 - 18,0 12 10 100 - 48,52 FCHC12-50/SS/B M12 1,75 50 36 18,0 12 10 100 - 55,11 F
356 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Part numberThreadØM Pitch
Totallength L B DK K S
Qty perpacket
Price perpacketStock*
*Depending on availability
Countersunk screw DIN 7991Stainless steel A2FHCSS
L
K B
ØMDK
S
90°
- Material: Stainless steel 302/304 - A2- Hexagonal socket- Sold by the packet
.Uses.- Suitable for harsh environments
.Info..- Dimension B is for information only and can
vary depending the shipment
stainless steel
Designer’s Note
Thread ØF (H13) TØM num. max. ~~
M3.0 06.60 06.82 1.60M4.0 09.80 10.02 2.65M5.0 10.90 11.17 2.70M6.0 13.20 13.47 3.30M8.0 18.10 18.43 4.55M10. 21.00 21.33 5.00M12. 25.20 25.53 5.85
ØF
ØM
T
90°-0°-2°
Countersunk heads
6+-5%
10+On request
1+List
No. packetsDiscounts
DISCOUNTS
FHC3-8/SS/B M3 0,50 8 - 6 1,6 2,0 500 � 22,72 F
FHC3-12/SS/B M3 0,50 12 - 6 1,6 2,0 500 � 26,46 F
FHC3-16/SS/B M3 0,50 16 - 6 1,6 2,0 500 � 27,94 F
FHC3-20/SS/B M3 0,50 20 - 6 1,6 2,0 500 � 32,41 F
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3571HPC
Part numberThreadØM Pitch
Totallength L B DK K S
Qty perpacket
Price perpacketStock*
*Depending on availability
FHCSS
FHC4-10/SS/B M4 0,70 10 - 8 2,3 2,5 500 � 23,44 F
FHC4-12/SS/B M4 0,70 12 - 8 2,3 2,5 500 � 28,26 F
FHC4-16/SS/B M4 0,70 16 - 8 2,3 2,5 500 � 26,07 F
FHC4-20/SS/B M4 0,70 20 - 8 2,3 2,5 500 � 29,81 F
FHC4-25/SS/B M4 0,70 25 - 8 2,3 2,5 500 � 32,41 F
FHC4-30/SS/B M4 0,70 30 20 8 2,3 2,5 200 � 18,28 F
FHC5-10/SS/B M5 0,80 10 - 10 2,8 3,0 500 � 26,07 F
FHC5-12/SS/B M5 0,80 12 - 10 2,8 3,0 500 � 26,82 F
FHC5-16/SS/B M5 0,80 16 - 10 2,8 3,0 500 � 29,81 F
FHC5-18/SS/B M5 0,80 18 - 10 2,8 3,0 500 - 55,02 F
FHC5-20/SS/B M5 0,80 20 - 10 2,8 3,0 500 � 32,41 F
FHC5-25/SS/B M5 0,80 25 - 10 2,8 3,0 500 � 49,67 F
FHC5-30/SS/B M5 0,80 30 - 10 2,8 3,0 200 � 16,37 F
FHC5-35/SS/B M5 0,80 35 22 10 2,8 3,0 200 � 26,28 F
FHC5-45/SS/B M5 0,80 45 22 10 2,8 3,0 200 - 42,05 F
FHC6-10/SS/B M6 1,00 10 - 12 3,3 4,0 500 � 30,90 F
FHC6-12/SS/B M6 1,00 12 - 12 3,3 4,0 500 � 44,17 F
FHC6-16/SS/B M6 1,00 16 - 12 3,3 4,0 500 � 51,95 F
FHC6-20/SS/B M6 1,00 20 - 12 3,3 4,0 200 � 20,79 F
FHC6-25/SS/B M6 1,00 25 - 12 3,3 4,0 200 � 27,50 F
FHC6-30/SS/B M6 1,00 30 - 12 3,3 4,0 200 � 18,93 F
FHC6-35/SS/B M6 1,00 35 - 12 3,3 4 200 � 27,21 F
FHC6-40/SS/B M6 1,00 40 - 12 3,3 4 200 � 31,40 F
FHC6-45/SS/B M6 1,00 45 - 12 3,3 4 100 - 14,95 F
FHC6-60/SS/B M6 1,00 60 20 12 3,3 4 100 - 35,93 F
FHC6-70/SS/B M6 1,00 70 20 12 3,3 4 100 - 56,45 F
FHC8-16/SS/B M8 1,25 16 - 16 4,4 5 200 � 36,51 F
FHC8-20/SS/B M8 1,25 20 - 16 4,4 5 200 � 42,30 F
FHC8-25/SS/B M8 1,25 25 - 16 4,4 5 100 � 27,19 F
FHC8-30/SS/B M8 1,25 30 - 16 4,4 5 100 � 29,31 F
FHC8-40/SS/B M8 1,25 40 - 16 4,4 5 100 � 20,30 F
FHC8-50/SS/B M8 1,25 50 - 16 4,4 5 100 � 32,97 F
FHC10-35/SS/B M10 1,50 35 - 20 5,5 6 100 � 54,40 F
FHC10-40/SS/B M10 1,50 40 - 20 5,5 6 100 � 54,03 F
FHC10-50/SS/B M10 1,50 50 32 20 5,5 6 100 - 49,01 F
FHC12-30/SS/B M12 1,75 30 - 24 6,5 8 50 � 39,83 F
FHC12-40/SS/B M12 1,75 40 36 24 6,5 8 50 - 29,45 F
FHC12-50/SS/B M12 1,75 50 36 24 6,5 8 50 - 34,84 F
FHC12-60/SS/B M12 1,75 60 36 24 6,5 8 50 - 41,27 F
FHC12-70/SS/B M12 1,75 70 36 24 6,5 8 50 - 52,84 F
FHC12-80/SS/B M12 1,75 80 36 24 6,5 8 50 - 70,86 F
358 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Set screw with hexagonal socketStainless steel A2HCSS
- Conforms to DIN 916- Material: Stainless steel 302/304 - A2- Working temperature up to +430°C- Sold by the packet
HC2-3/SS/B M2 0,40 3 1,0 0,9 200 � 61,47 F
HC2-4/SS/B M2 0,40 4 1,0 0,9 200 � 60,55 F
HC2-5/SS/B M2 0,40 5 1,0 0,9 200 � 61,01 F
HC2-6/SS/B M2 0,40 6 1,0 0,9 200 � 61,01 F
HC2-10/SS/B M2 0,40 10 1,0 0,9 200 � 74,00 F
HC2,5-5/SS/B M2,5 0,45 5 1,2 1,3 200 � 61,01 F
HC2,5-8/SS/B M2,5 0,45 8 1,2 1,3 200 - 73,96 F
HC2,5-10/SS/B M2,5 0,45 10 1,2 1,3 200 - 73,96 F
ThreadØM Pitch
LengthL DV S
Qty. perpacket
SL
ØMDV
Part number Stock*
*Depending on availability
Price perpacket
stainless steel
Designer’s Note
Bore or shaft diameter Screw sizeØTM3M3M3M4M5M6M8
M10M12
from Ø to Ø (included)Ø4 - Ø6Ø6 - Ø8Ø8 - Ø10Ø10 - Ø12Ø12 - Ø17Ø17 - Ø22Ø22 - Ø30Ø30 - Ø44Ø44 - Ø58
6+-5%
10+On request
1+List
No. packetsDiscounts
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3591HPC
HCSS
HC3-3/SS/B M3 0,50 3 1,4 1,5 500 � 33,15 F
HC3-4/SS/B M3 0,50 4 1,4 1,5 500 � 26,46 F
HC3-5/SS/B M3 0,50 5 1,4 1,5 500 � 23,44 F
HC3-6/SS/B M3 0,50 6 1,4 1,5 500 � 26,46 F
HC3-8/SS/B M3 0,50 8 1,4 1,5 500 � 29,06 F
HC3-10/SS/B M3 0,50 10 1,4 1,5 500 � 29,81 F
HC3-12/SS/B M3 0,50 12 1,4 1,5 500 - 32,41 F
HC3-16/SS/B M3 0,50 16 1,4 1,5 500 - 41,00 F
HC3-20/SS/B M3 0,50 20 1,4 1,5 500 � 47,36 F
HC4-4/SS/B M4 0,70 4 2,0 2,0 500 � 23,44 F
HC4-5/SS/B M4 0,70 5 2,0 2,0 500 � 20,86 F
HC4-6/SS/B M4 0,70 6 2,0 2,0 500 � 20,10 F
HC4-8/SS/B M4 0,70 8 2,0 2,0 500 - 20,10 F
HC4-10/SS/B M4 0,70 10 2,0 2,0 500 � 23,44 F
HC4-12/SS/B M4 0,70 12 2,0 2,0 500 - 24,57 F
HC4-16/SS/B M4 0,70 16 2,0 2,0 500 - 29,81 F
HC4-20/SS/B M4 0,70 20 2,0 2,0 500 � 40,24 F
HC5-5/SS/B M5 0,80 5 2,5 2,5 500 � 29,06 F
HC5-6/SS/B M5 0,80 6 2,5 2,5 500 � 22,36 F
HC5-8/SS/B M5 0,80 8 2,5 2,5 500 � 23,44 F
HC5-10/SS/B M5 0,80 10 2,5 2,5 500 � 24,21 F
HC5-12/SS/B M5 0,80 12 2,5 2,5 500 � 24,94 F
HC5-16/SS/B M5 0,80 16 2,5 2,5 500 - 26,46 F
HC5-20/SS/B M5 0,80 20 2,5 2,5 500 � 43,24 F
HC5-25/SS/B M5 0,80 25 2,5 2,5 200 - 23,99 F
HC5-30/SS/B M5 0,80 30 2,5 2,5 200 � 29,06 F
HC6-6/SS/B M6 1,00 6 3,0 3,0 500 � 24,94 F
HC6-8/SS/B M6 1,00 8 3,0 3,0 500 � 26,07 F
HC6-10/SS/B M6 1,00 10 3,0 3,0 500 � 26,82 F
HC6-12/SS/B M6 1,00 12 3,0 3,0 500 � 27,94 F
HC6-16/SS/B M6 1,00 16 3,0 3,0 500 - 36,52 F
HC6-20/SS/B M6 1,00 20 3,0 3,0 500 � 39,51 F
HC6-25/SS/B M6 1,00 25 3,0 3,0 200 � 24,57 F
HC6-30/SS/B M6 1,00 30 3,0 3,0 200 � 29,22 F
HC6-35/SS/B M6 1,00 35 3,0 3,0 200 - 35,03 F
HC6-40/SS/B M6 1,00 40 3,0 3,0 200 � 39,68 F
HC8-16/SS/B M8 1,25 16 5,0 4,0 200 � 22,36 F
HC8-20/SS/B M8 1,25 20 5,0 4,0 200 � 29,11 F
HC8-25/SS/B M8 1,25 25 5,0 4,0 200 - 33,09 F
HC8-30/SS/B M8 1,25 30 5,0 4,0 200 � 40,10 F
HC8-40/SS/B M8 1,25 40 5,0 4,0 200 - 59,80 F
HC10-10/SS/B M10 1,50 10 6,0 5,0 100 - 14,56 F
HC10-16/SS/B M10 1,50 16 6,0 5,0 100 - 19,29 F
HC10-20/SS/B M10 1,50 20 6,0 5,0 100 � 21,59 F
HC10-25/SS/B M10 1,50 25 6,0 5,0 100 � 23,33 F
HC10-30/SS/B M10 1,50 30 6,0 5,0 100 - 28,68 F
HC10-40/SS/B M10 1,50 40 6,0 5,0 100 - 36,04 F
HC10-50/SS/B M10 1,50 50 6,0 5,0 100 � 51,29 F
ThreadØM Pitch
LengthL DV S
Qty. perpacketPart number Stock*
*Depending on availability
Price perpacket
360 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Socket head button screw ISO 7380Stainless steel A2BHC
KL
ØM
S
D
- Conforms to ISO 7380- Material: stainless steel 302/304-A2- Hexagonal socket- Sold by the packet
BHC4-8/SS/BBHC4-10/SS/BBHC4-12/SS/BBHC4-16/SS/BBHC5-10/SS/BBHC5-12/SS/BBHC5-16/SS/BBHC5-20/SS/BBHC6-12/SS/BBHC6-16/SS/BBHC6-20/SS/BBHC6-25/SS/BBHC8-16/SS/BBHC8-20/SS/BBHC8-25/SS/BBHC8-30/SS/B
M4M4M4M4M5M5M5M5M6M6M6M6M8M8M8M8
0,700,700,700,700,800,800,800,801,001,001,001,001,251,251,251,25
8101216101216201216202516202530
7,67,67,67,69,59,59,59,5
10,510,510,510,514,014,014,014,0
2,202,202,202,202,752,752,752,753,303,303,303,304,404,404,404,40
2,52,52,52,53,03,03,03,04,04,04,04,05,05,05,05,0
500500500500500500500500500500500500200200200200
Part numberThread
øM PitchLength
L D K SQty. perpacket
Price perpacket
25,39 F
30,44 F
20,27 F
28,21 F
33,79 F
24,57 F
27,36 F
55,02 F
54,08 F
60,84 F
70,30 F
49,79 F
32,60 F
51,60 F
61,46 F
57,33 F
stainless steel
1+List
6+-5%
10+On request
No. packetsDiscounts
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3611HPC
Nylon tipped set screwStainless steel A2 NTM
NTM2-4NTM2-5NTM2-6NTM2-7NTM3-4NTM3-5NTM3-6NTM3-7NTM4-5NTM4-7NTM4-11NTM4-15NTM5-7NTM5-11NTM5-15NTM5-21NTM6-7.5NTM6-11.5NTM6-17.5NTM6-26.5NTM10-14.5NTM10-22.5NTM10-32.5
M2M2M2M2M3M3M3M3M4M4M4M4M5M5M5M5M6M6M6M6M10M10M10
0,40,40,40,40,50,50,50,50,70,70,70,70,80,80,80,81,01,01,01,01,51,51,5
4,005,006,007,004,005,006,007,005,007,00
11,0015,00
7,0011,0015,0021,00
7,5011,5017,5026,5014,5022,5032,50
0,80,80,80,81,61,61,61,62,42,42,42,42,42,42,42,43,23,23,23,24,84,84,8
0,80,80,80,80,80,80,80,81,21,21,21,21,21,21,21,21,61,61,61,62,42,42,4
��������������������---
8,20 F
10,02 F
7,42 F
6,85 F
3,76 F
3,28 F
6,63 F
4,85 F
3,71 F
3,96 F
4,36 F
5,43 F
7,95 F
4,01 F
5,60 F
6,23 F
4,48 F
3,65 F
7,06 F
6,92 F
10,21 F
18,61 F
on request
Part number Ø Thread Pitch L ØN APrice each
1 to 5
- Does not damage shafts- Self-locking- Nylon tip adapts to shaft and
increases grip
Stock*
*Depending on availability
Hexagonalsocket
Nylon tip
L ±0,5
A
ØThread ØN
stainless steel
6+-10%
20+-15%
40+-20%
60+-30%
100+-55%
300+On request
1+List
Qty.Disc.
DISCOUNTS
362 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Self aligning washersFor M6-M12 screwsRCC
RCX
REFERENCE ? ? ? ?Prix Uni.
1 à ?
- Use a pair of one concave and oneconvex washer
- Material: stainless steel 1.4305
.Advantages.- Spreads pressure uniformly- Ensures screw head seats correctly
90°
RCX-6/SSRCX-8/SSRCX-10/SSRCX-12/SS
RCC-6/SSRCC-8/SSRCC-10/SSRCC-12/SS
M6M8
M10M12
M6M8
M10M12
06,408,410,513,0
07,109,612,014,2
12172124
12172124
----
11,014,518,520,0
0,70,60,81,1
----
2,33,24,04,6
2,83,54,25,0
09121517
----
Part numberFor
screwØD1H13 ØD3 ØD5 H1 H2 R1
2,29 F
3,24 F
4,45 F
5,06 F
2,35 F
3,41 F
4,62 F
5,41 F
Price each1 to 5
H1
ØD1
R1 bille
H2
ØD3
RCX convex washer
90°
ØD1
ØD5
H2
ØD3
RCC concave washer
Typical application
∂°
Max.staticload (kN)
09172638
09172638
����
����
Convex washer
Concave washer
Stock*
*Depending on availability
stainless steel
50+On request
6+-5%
20+-10%
1+List
Qty.Disc.
DISCOUNTS
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3631HPC
Plain washer DIN 125Stainless steel A2
SHW-2/BSHW-2,5/BSHW-3/BSHW-4/BSHW-5/BSHW-6/BSHW-8/BSHW-10/BSHW-12/BSHW-14/BSHW-16/BSHW-18/BSHW-20/BSHW-22/BSHW-24/BSHW-27/BSHW-30/B
M2M2,5M3M4M5M6M8M10M12M14M16M18M20M22M24M27M30
5679
10121620242830343739445056
0,30,50,50,81,01,61,62,02,52,53,03,03,03,04,04,04,0
200020001000100010001000
500500200200200200200100100100
50
���������-�------
9,27 F
15,49 F
2,45 F
4,93 F
6,80 F
16,10 F
10,95 F
26,93 F
22,91 F
27,61 F
28,23 F
37,40 F
38,66 F
22,82 F
40,72 F
48,26 F
29,71 F
- Conforms to DIN125- Working temperature: up to +430°C- Material: Stainless steel A2 303/304- Sold by the packet
.Accessories.- Steel and stainless steel screws
.Option.- Also available in stainless steel 316 (A4)
ØD L
For screwØM
Partnumber
For threadØM ØD L
Quantityper packet
Price perpacket 1 to 5Stock*
*Depending on availability
SHW
1+List
6+-10%
11+On request
No. packetsDiscounts
DISCOUNTS
stainless steel
364 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Hexagonal nut DIN 934Stainless steel A2SHN
- Conforms to DIN 934- Bore chamfered to 120°±10°- External chamfer 30°- Standard pitch- Material: Stainless steel
A2 303/304- Max. working temperature:+430°C- Sold by the packet
.Options.- Also available in stainless steel
316 (A4)- Finely-threaded nut SHN-F
SHN-1.6/BSHN-2/BSHN-2.5/BSHN-3/BSHN-4/BSHN-5/BSHN-6/BSHN-8/BSHN-10/BSHN-12/BSHN-14/BSHN-16/BSHN-18/BSHN-20/BSHN-22/BSHN-24/BSHN-27/BSHN-30/BSHN-33/BSHN-36/B
76,74 F
29,02 F
10,22 F
11,76 F
9,52 F
12,98 F
8,05 F
9,14 F
13,84 F
22,52 F
13,60 F
33,15 F
35,11 F
40,97 F
33,15 F
48,65 F
78,90 F
108,64 F
47,35 F
64,46 F
Partnumber
ThreadingØM Pitch A/F C L
Qty perpacket
Price perpacket
C
L
ØM
A/F
*Depending on availability
Stock*
stainless steel
1+List
6+-10%
11+On request
No. packetsDiscounts
DISCOUNTS
M1,6 M2M2,5M3M4M5M6M8M10M12M14M16M18M20M22M24M27M30M33M36
0,350,400,450,500,700,801,001,251,501,752,002,002,502,502,503,003,003,503,504,00
3,24,05,05,57,08,0
10,013,017,019,022,024,027,030,032,036,041,046,050,055,0
3,48 4,32 5,45 6,01 7,668,79
11,0514,3818,9021,1024,4926,7529,5632,9535,0339,5545,2050,8555,3760,79
1,01,62,02,43,24,05,06,58,0
10,011,013,015,016,018,019,022,024,026,029,0
5002000
5001000
500500200100100100
50505050252525251010
-���������-�-�------
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3651HPC
Self locking nut DIN 985Stainless steel A2 and nylon insert lock NIN
- Conforms to DIN 985- Locking nut- Nylon insert- Material: Stainless steel A2 - Sold by the packet
C
ØM
A/FL
H
NIN-3/BNIN-4/BNIN-5/BNIN-6/BNIN-8/BNIN-10/BNIN-12/BNIN-14/BNIN-16/BNIN-18/BNIN-20/BNIN-22/BNIN-24/B
ThreadØM Pitch A/F C L H
Qty perpacket
Partnumber
Price perpacket
29,05 F
27,65 F
34,20 F
27,61 F
25,79 F
42,37 F
30,88 F
33,65 F
27,50 F
96,62 F
63,32 F
108,06 F
84,49 F
M3M4M5M6M8M10M12M14M16M18M20M22M24
0,500,700,801,001,251,501,752,002,002,502,502,503,00
5,57,08,0
10,013,017,019,022,024,027,030,032,036,0
-------------
2,73,23,54,56,07,09,0
10,011,014,015,016,016,0
4,05,05,06,08,0
10,012,014,016,018,520,022,024,0
100010001000
500200200100100
5050252525
�������-�----
*Depending on availability
Stock*
stainless steel
1+List
6+-10%
11+On request
No. batchesDiscounts
DISCOUNTS
366 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Some different fastening systems
Set screw Key. circlip Self-lubricatingbushing
Gear clamp Integral gearclamp Woodruff key andlock nut fixing
Gear & pinionpinned Internal clamp
And also techniciansto help you on
+33(0)437 496 496
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3671HPC
Technical informationThreads
BSPHole Ø
for tapping(mm)
Pitch(mm)
No. threads perinch (T.P.I.)
1/8 BSP1/4 BSP3/8 BSP1/2 BSP5/8 BSP3/4 BSP7/8 BSP1 BSP1 1/4 BSP1 1/2 BSP1 3/4 BSP2 BSP
8,7511,8015,2519,0521,0324,5028,2530,7539,5045,2451,0057,00
0,911,341,341,811,811,811,812,312,312,312,312,31
281919141414141111111111
9,7313,1616,6620,9622,9126,4430,2033,2541,9147,8053,7559,61
THREAD55° (inc )> )
Outsidediameter
(mm)
Pitch(mm)
Outside Ø(mm)
Tapping drill Ø(mm)
M2M2,5M3M4M5M6M7M8M10M12M14M16M18M20M22M24
0,400,450,500,700,801,001,001,251,501,752,002,002,502,502,503,00
2,002,503,004,005,006,007,008,00
10,0012,0014,0016,0018,0020,0022,0024,00
1,602,052,503,304,205,006,006,808,50
10,2012,0014,0015,5017,5019,5021,00
THREADISO THREAD (ANGLE 60°)
OTHER THREAD TYPES
368 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Technical information
0-BA1-BA2-BA3-BA4-BA5-BA6-BA7-BA8-BA
5,104,504,003,453,002,652,302,051,80
1,000,900,810,730,660,590,530,480,43
25,3828,2531,3534,8438,4643,1047,8552,9159,71
6,005,304,704,103,603,202,802,502,20
1/8 BSW3/16 BSW1/4 BSW5/16 BSW3/8 BSW7/16 BSW1/2 BSW9/16 BSW5/8 BSW3/4 BSW7/8 BSW1 BSW
2,553,705,106,507,949,36
10,5012,1013,5016,2719,2522,00
0,641,061,271,411,591,812,122,122,312,542,823,18
4024201816141212111098
3,184,766,357,949,53
11,1112,7014,2915,8819,0522,2325,40
BSF BSW BAHole Ø
for tapping(mm)
Pitch(mm)
No. threads perinch (T.P.I.)
3/16 BSF1/4 BSF5/16 BSF3/8 BSF7/16 BSF1/2 BSF9/16 BSF5/8 BSF3/4 BSF7/8 BSF1 BSF
3,975,306,758,259,70
11,1112,7014,0016,7519,8422,75
0,790,981,151,271,411,591,591,842,122,312,54
3226222018161614121110
4,766,357,949,53
11,1112,7014,2915,8819,0522,2325,40
THREAD55° (inc )> )
Outsidediameter
(mm)
Threads
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3691HPC
Technical information
Hole Ø for tapping
(mm)Pitch(mm)
No. threads perinch (T.P.I.)
2-64 UNF3-56 UNF4-48 UNF6-40 UNF8-36 UNF10-32 UNF12-28 UNF1/4-28 UNF5/16-24 UNF3/8-24 UNF7/16-20 UNF1/2-20 UNF9/16-18 UNF5/8-18 UNF3/4-16 UNF7/8-14 UNF1-12 UNF
1,902,152,402,953,554,104,655,506,908,509,90
11,4012,9014,5017,4620,4223,25
0,400,450,530,640,710,790,910,911,061,061,271,271,411,411,591,812,12
6456484036322828242420201818161412
2,182,512,843,514,174,835,496,357,949,53
11,1112,7014,2915,8819,0522,2325,40
THREAD60° (inc )> )
Outsidediameter
(mm)
Hole Ø for tapping
(mm)Pitch(mm)
No. threads perinch (T.P.I.)
2-56 UNC3-48 UNC4-40 UNC6-32 UNC8-32 UNC10-24 UNC12-24 UNC1/4-20 UNC5/16-18 UNC3/8-16 UNC7/16-14 UNC1/2-13 UNC9/16-12 UNC5/8-11 UNC3/4-10 UNC7/8-9 UNC1-8 UNC
1,852,102,352,843,503,904,555,306,608,009,40
10,8012,2513,5016,5019,4522,25
0,450,530,640,790,791,061,061,271,411,591,811,952,122,312,542,823,18
56484032322424201816141312111098
2,182,512,843,514,174,835,496,357,949,53
11,1112,7014,2915,8819,0522,2325,40
THREAD60° (inc )> )
Outsidediameter
(mm)
UNF
UNC
Threads
370 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Stainless steelsGENERAL REMARKS ABOUT AUSTENITIC STAINLESS STEELThe basic structure of AUSTENITIC STAINLESS STEEL is the well-known alloy of 18%CHROMIUM and 8% NICKEL. The CHROMIUM and NICKEL content can be increased toimprove corrosion resistance. In order to do this, supplementary elements such asMolybdenum can also be added.AUSTENITIC STEELS are non-magnetic and cannot be heat-treated or tempered. Coldworking or work hardening is the only way to harden this type of steel but the process musthappen quickly. The steel can later be converted back to its initial state if is annealed. Thissolution is used as a replacement for heat treatment.TYPE Z8CNF18.09 (STAINLESS STEEL 303)Colour code: whiteAustenitic: non-magneticSULPHUR added to facilitate machining.Good corrosion resistance Weldability: acceptable (but in general oxyacetylenewelding is not recommended)Cold forming is possible but bends with sharp anglesshould be avoided.Applications: Production by batch machining,automated machines...TYPE Z4CN19.10FF (STAINLESS STEEL 304)Colour code: yellowAustenitic: non-magneticThis is the most common type of stainless steel usedMachining quality: acceptableGood corrosion resistanceGood weldability (but in general oxyacetylenewelding is not recommended)Cold forming gives very good results (slightlymagnetic when cold-formed)Applications : hospitals, laundries, all generalmechanical applications.
TYPE Z3CND18.14.08 (STAINLESS STEEL 316L)Colour code: redAustenitic steel: non-magneticHigh corrosion resistance, especially against saltwater and acids.Machining quality: acceptableGood weldabilityCold forming gives very good results (non-magneticwhen reheated, slightly magnetic when cold-formed)Applications: petrochemical industry, marineenvironments, hospitals, catering.TYPE Z6DNT18.10 (STAINLESS STEEL 321)Colour code: blueAustenitic steel: non-magneticMachining quality: acceptableGood corrosion and oxidation resistanceVery good weldabilityCold forming gives very good results (non-magneticwhen reheated, slightly magnetic when cold-formed),Applications: petrochemical industry, in general allmechanical applications...
MARTENSITIC STEELShese steels, which generally contain 13%Chromium, are the least corrosion-resistantstainless steels. They should therefore beused when corrosive conditions are relativelyrare. Their main application is for cutlery.AUSTENITIC STEELSThis type of stainless steel is by far the mostwidely-used. It resists most types of corrosionand is principally used in food preparationareas, dairies, breweries, and otherprocessing plants, as well as in several partsof the chemical industry.FERRITIC STEELSThe most commonly used ferritic steel isZ8C17 (stainless steel 430) which contains17% Chromium. They have a greater
corrosion resistance than martensitic steels,without being as efficient as standardaustensitic steels. They are generally used fordecorative trim on car motors and householdappliances.MOLYBDENUMMolybdenum, when added to austenitic steel,greatly improves corrosion resistance. Type 316stainless steels contain between 2 and 3%Molybdenum.This type of steel is principally used in chemicaland petrochemical industries where resistance tochlorine, as an example, is necessary.Nevertheless, it is important to mention that thesesteels are not resistant to all types of chemicalattacks (such as hydrochloric or oxalic acid,especially when hot or in high concentrations).
CORROSION REISTANCE OF STAINLESS STEELS
Technical information
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3711HPC
Technical informationStainless steels: Mechanical properties
Mechanical properties and softening temperatures for ferritic and martensic steels
Z11CN17.08Z1CN18.12Z4CN19.10ffZ5CN17.08Z7CN18.09Z5CN18.11ffZ2CND17.12Z2CND18.13Z6CND17.11.02Z2CND19.15.04Z6CNT18.10Z6CNNb18.10
215180195195195185190205205195200205
250215230230230220225240240230235240
540480500500500490490510510490500510
40%40%40%40%40%40%40%40%40%40%40%40%
220135190190190185195205205195200200
SoftenedSoftenedSoftenedSoftenedSoftenedSoftenedSoftenedSoftenedSoftenedSoftenedSoftenedSoftened
1000°C1000°C1000°C1000°C1000°C1000°C1000°C1000°C1000°C1000°C1000°C1000°C
1120°C1120°C1120°C1120°C1120°C1120°C1120°C1120°C1120°C1120°C1120°C1120°C
Nil301515NilNil301515303030
Typeof steel
Proof stress
Rp0,2min
N/mm2
Rp01.0,min
N/mm2
Tensilestrength
Rm.min
N/mm2
Elongation
A.minHardnessHV.max.†
Intergranularsensitivisation
time testmin
Softening temperature rangemin max
Condition
Typeof steel
ProofstressRp0,2min
N/mm2
Tens
ilest
reng
th
Rmmin
N/mm2 A.min min. max.
Elon
gatio
n
Hardness HVmax. †
Softening
min. max.
Hardening‡
min. max.
Tempering
245245245
—
—
420
420420430
—
20%20%20%
—
190190190
230
175
175175175
220
SoftenedSoftenedSoftened
SoftenedQuenched
Hardened
SoftenedQuenched
Hardened
Softened
700°C700°C750°C
700°C
700°C
700°C
780°C780°C820°C
780°C
780°C
780°C
————
950°C
950°C
—
————
1020°C
1050°C
—
————
650°C
150°C—
————
750°C
250°C—
Ferritic steels
28C1228CA1228C17
Martensicsteels
210C13
230C13
Cond
ition
1 N/mm2 = 1 mpa • Stretching was measured with flat test-parts of gauge length 50mm or5.65√so. for cylindrical test-parts a gauge length of 5.64√so was used† For parts of sufficient thickness, the Brinell hardness test can be used, applying the same hardness limit values for HB as those given for HV‡ Only as an indication.
MECHANICAL PROPERTIES, SOFTENING TEMPERATURES ANDINTERGRANULAR CORROSION TESTS OF AUSTENETIC STAINLESS STEEL
372 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Stainless steels: Manufacturing guide
301S1BBA
B-CC-DB-CCB
115,0080,80
169,00119,00220,00155,00NoC
No†CABCBBDABD
A-BA
302S25BB
A-BBCBBB
90,0063,30
142,00100,00180,00127,00NoC
No†BAACBB
B-CA
A-BD
A-BA
304S16BB
A-BBCBBB
85,0059,70
138,0097,00
178,00125,00NoC
No†BAACBB
B-CAADAA
304S12BBBBCBBB
82,0058,00
140,0098,00
182,00128,00NoC
No†BAACBB
B-CAADAA
305S19BB
A-BA-BCBBB
80,0056,20
130,0091,00
170,00119,00NoC
No††BAACBBAAADAA
303S21—BBA
B-C—BB
——————NoB-C
No††—A—CBB—BBD
B-CB
303S41—DDDBCDB
——————NoB-CNo†—D—BC
C-D—DDDDD
309S24BBBBCB
B-CB
90,0063,30
130,0091,00
169,00119,00NoC
No†BBBCBB
B-CABDAA
310S24BBBBCB
B-CB
95,0066,80
126,0089,00
165,00116,00NoC
No††BBACBBBABDAA
316S16BBBBCBBB
90,0063,30
134,0094,00
165,00116,00NoC
No†BBACBBBAADAA
BlankingBrazingBuffingCoiningDrillingEmbossingCold-forgingHot-forgingHardenning by cold worka) Annealed 1000psi
kg/mm2
b) 25% Reduction 1000psikg/mm2
c) 50% Reduction 1000psikg/mm2
Hardened by heat treatmentMachiningMagneticPunchingPolishingRoll formingSawingShearingSolderingSpinningSpot-welding (Resistance)Welding (coated electrodes)Welding (oxyacetylene)Welding metal inert gas arcWelding tungsten inert gas arc
A = Excellent B = Good C = Acceptable D = Not recommended
† Develops magnetism after cold working†† Develops less magnetism after cold working* Severe sharp bends to be avoided
Technical information
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3731HPC
304 Z4CN19.10FF 18% CHROMIUM, 9% NICKEL Sinks, architectural pieces, car Forming: good exhausts, cutlery, kitchenware, piping.
304L Z1CN18.12 LESS CARBON THAN STAINLESS Breweries, dairies, food andZ1CN18.09 STEEL 304 pharmaceutical industries, kitchenware,
sinks
305 Z8CN18.12 18% CHROMIUM, 12% NICKEL Same as stainless steel 310Forming: good
309 - 23% CHROMIUM, 14% NICKELHigh oxidation resistance
310 - 25% CHROMIUM, 20% NICKEL Ovens, metallurgical factories, heat High oxidation resistance exchangers
316 Z3CND17.11.01 17% CHROMIUM, 11% NICKEL Chemical and petrochemical plants,2.5% MOLYBDENUM architectural pieces, breweriesHigh corrosion resistance
316L Z2CND17.12 Less CARBON than STAINLESS STEEL 316
317 - 18% CHROMIUM, 12% NICKEL Chemical and petrochemical factories,2.5% MOLYBDENUM and TITANIUM acetic acid distilleriesHigh corrosion resistance
317L Z2CND19.15.04 Less CARBON than STAINLESS STEEL 317
321 Z6CNT18.10 18% CHROMIUM, 10% NICKEL and TITANIUM Aircraft parts, chemical andpetrochemical industries, heatingelements
325 - CONTAINS SULPHUR: EASIER TOMACHINE THAN STAINLESS STEEL 321,ONLY AVAILABLE IN BARS
347 Z6CNNb 18.10 18% CHROMIUM. 10% NICKEL and NIOBIUM Transformation factories, aircraftSensitivisation and nitric acid resistance parts
Technical informationCharacteristics of stainless steels
374 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Characteristics of stainless steels
Technical information
STEELTYPE DESCRIPTION APPLICATIONSMARTENSIC STEELS: MAGNETIC, TEMPERING POSSIBLE, MODERATE
CORROSION RESISTANCE
410 Z10C13 12% CHROMIUM Pump and turbine parts, generalmechanics, knife blades, valves
416 Z11CF13 Contains sulphur: easier to machine Construction, railway carriages,than stainless steel 410 mine-carts
420 Z20C13 Heat-resistant
431 Z15CN16.02 17% CHROMIUM, 21/2% NICKELOnly available in bars
FERRITIC STEELS: MAGNETIC, CHROME STEELS, CHLORIDES GIVECORROSION RESISTANCE
430 Z8C17 17% CHROMIUM Sinks, Architectural parts, decorative car parts
434 - 17% CHROMIUM, 1% MOLYBDENE Car exhaust systemsResistant to atmospheric corrosion and chipping
409 Z3CT12 12% CHROMIUM and TITANIUM Construction, railway carriages,Weldable up to thicknesses of 2.5mm mine-carts
403 Z8C12 Modified stainless steel 409, weldable in reinforced section, forming possible
AUSTENITIC STEELS: NON-MAGNETIC, CHROMIUM AND NICKEL STEELS, GOODWELDABILITY, GOOD GENERAL CORROSION RESISTANCE
301 Z11CN17.08 17% CHROMIUM, 7% NICKEL General construction, springs, marineForming possible chafing plates and protective plates
302 Z10CN18.09 18% CHROMIUM, 9% NICKEL Same as stainless steel 304Forming: good
303 Z8CNF18.09 Easier to machine than stainless steel302, only available in bars
376 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
General terms and conditions of sale
Note. This translation of the original Engrenages HPC (Henceforth shortened to HPC) French termsand conditions is offered as a guide only. In the case of any dispute, the French document will apply.
1- APPLICATION AND ACCEPTANCE OF THESE GENERAL TERMS AND CONDITIONS OF SALE
These terms and conditions of sale are made available to all HPC customers and are sent to everycustomer placing an order. Consequently the act of placing an order with HPC implies complete andunreserved agreement by the buyer to these general terms and conditions of sale, to the exclusionof any other documents such as catalogues produced by the seller, which are provided forinformation only and are merely intended as an indication, and despite any other informationmarked on the customer’s order documents, the customer’s terms and conditions of purchase or inany other document transmitted by the customer to HPC. Any conditions other than those relatingto products being manufactured to a customer’s specifications, applied by the buyer will thereforeby default be not accepted by the seller, regardless of when they may be brought to their attentionunless they have been confirmed in writing by the seller.
Only specifications relating to custom-made parts can modify these general terms and conditions.
The fact that the seller does not immediately apply any of the clauses in these terms and conditionsshould not be interpreted as meaning that they may not do so at a later date.
2- ORDERS.
Orders must be placed in writing to HPC by the customer. Any order by telephone must be confirmedin writing by the customer within 24 hours or the order will be cancelled. An order will only becomedefinitive and the sales contract confirmed when it is accepted by HPC, this acceptance taking theform of an order confirmation sent to the customer or the delivery of the products ordered.
In case of any modification HPC may deem necessary to apply to the customer’s order and confirmedin the order acknowledgment sent to the customer, the latter is assumed to have acceptedthe modification unless HPC is advised in writing within 24 hours of receipt.
No order with a value lower than 20 Euros (before tax) will be accepted, this includes orders passedat the trade counter at HPC’s offices.
No order with a value lower than 150 Euros (before tax) will be accepted from customers outside ofFrance (EU countries included)
3- MODIFICATIONS TO ORDERS
Any modification to, or cancellation of an order requested by the buyer cannot be taken intoconsideration unless it is received in writing before the goods (for standard products) aredespatched or manufacture is started (for custom-made products) and acceptance of themodification has been expressly confirmed by HPC in a fax addressed to the customer within 24hours of the request. If either of these conditions is not fulfilled, the products ordered initially will besent and full payment will become due.
However, in the case of a standard parts order placed by a non-professional buyer, they may exercisetheir right to retraction and cancel the order within 7 days after reception of merchandise.Return carriage costs are to be paid by the buyer.
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3771HPC
General terms and conditions of sale
4- PRICES
All prices mentioned in the catalogue are quoted without tax. VAT at the current rate, delivery andpacking charges as marked in the catalogue and any insurance to which the customer wishes tosubscribe will be added to these prices. Different packaging options are detailed in the catalogueand the most suitable will be chosen by HPC at time of shipment unless the customer has made aprior request.
Unless stated to the contrary, products are sold at the price applicable the day the order is placed.Prices quoted in the catalogue are those applicable on the date of publication marked on the coverof said catalogue. HPC reserves the right to modify these prices at any time.
In the case of non-professionals purchasing by mail-order, prices are guaranteed for 2 months fromthe date of publication of the catalogue
5- DELIVERY METHODS AND DESPATCH DATES.
A- DESPATCH DATES
Items in stock on the date an order is accepted can be made available for collection or despatchedwithin a maximum of 72 hours. For catalogue items not in stock at the time the order is acceptedor for special items, an estimated despatch time will be sent to the customer when the order isacknowledged.
Despatch dates are given as an estimate only and can by no means be used as the basis for anyclaim for damages, charges for late delivery or interest; neither can they be used as justification fordelaying or cancelling of the order, whatever the cause, length or consequences of the delay maybe.
HPC is released from its obligation to deliver the goods in the case of factors outside of their controlsuch as but not limited to; war, riots, fire, industrial disputes, natural disasters or failure of theirsuppliers.
B- DELIVERY
Unless stated otherwise, delivery is carried out by the collection of the goods by customer from HPC’spremises in Dardilly 69570 (France) or by delivery a means of transport chosen by HPC or thecustomer. Products are sold from Dardilly 69570 France (HPC premises) and are transported at therisk of the customer, the goods remaining the property of HPC until full payment is received asexplained in Clause 10.
Unless otherwise agreed, goods are sold “ex-works” and transport is carried out at the customer’scost by a transport method chosen by HPC unless one has been specified by the customer.
In case of loss or damage during transit, it is the customer’s responsibility to contact thetransporter in writing by recommended letter or other legally accepted means within 3 days ofreception of the products (article L133-3 of the French Commercial Code)
HPC reserves the right to make partial deliveries from an order where necessary.
C- RECEPTION
Excepting claims for damaged goods made direct to the transport company concerned, anycomplaints regarding differences between the products delivered and those products ordered oridentified on the delivery document, should be sent in writing to HPC within 30 days of receipt of thegoods.
378 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
General terms and conditions of sale
It is the buyer’s responsibility to provide full proof of the existence of problems or faults with thegoods supplied. He must give the seller access and means to evaluate these problems and to remedythem. He will not however attempt to repair any faults either directly or by the use of a third party.
HPC’s guarantee is limited to the free replacement or repair of products or components that theyhave agreed are faulty.
Any product for which the buyer wishes to invoke the guarantee must be returned to the seller’scustomer service department whose agreement is essential for any replacement. Postage costs willbe charged to the buyer if the claim for replacement under guarantee clause is found not to beapplicable.
6- METHODS OF PAYMENT
Our invoices which will be sent at the same time as goods are despatched, are payable as follows:
• On receipt, if goods are sold and collected from HPC’s premises• 30 days from the end of the month of the invoice date for other sales• in Euros, by cheque, credit card, bank transfer, or promissory note, the choice of method of
payment cannot change the payment due date.
No discounts are made for advance payments.
7- LATE OR NON PAYMENT
If payment is not made within the period quoted above and after 8 days of receipt of a formal noticeof non payment, the customer will be liable for charges equivalent to an interest rate of one and ahalf times the legal interest rate on the sum owed as well as any costs associated with the finalcollection of the unpaid sum. Any claims by the customer do not exempt him from paying an invoiceon or before the due date. Non or partial payments will lead to the immediate requirement for thecustomer to pay all sums outstanding to HPC, even if they are not yet due and whatever theintended method of payment might be.
8- GUARANTEE
HPC guarantees the customer against defects that appear in the products sold under the conditionsstipulated in article 1641 of the French Civil Code.
For products made to a customer’s specifications, HPC’s responsibility is limited to manufacturingitems that conform to the specifications supplied but does not guarantee their functionality orsuitability for any application the customer may use them for. The customer is solely responsible forthe information transmitted to HPC.
For standard products, HPC guarantees their conformity to the specifications quoted in thecatalogue. HPC’s responsibility and/or the implementation of the guarantee owed by HPC cannottake place more than 30 days after receipt of the goods by the customer. Any claim under theguarantee will be limited to an amount equal to the price paid for the product. In no case candamage caused by a product marketed by HPC be a reason to any claim for damages.
In the event that a product manufactured to a customer’s specification infringes the rights of a thirdparty, the customer accepts responsibility for refunding all the costs (procedure, claims, damages,lawyers’ expenses, other advisors...) suffered by HPC and will actively cooperate at his own expensein the defence of the latter.
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3791HPC
General terms and conditions of sale
The guarantee will be considered void if products have been modified or interfered with in any wayby the customer without prior written agreement from HPC or if the products have been used in anyabnormal way or under unsuitable conditions taking into account their characteristics and normalapplicable uses and standards (in particular in the event of use or installation in any aerial or rocketengine for which the products are completely unsuited)
9- RETURN OF MATERIAL
Every returned product must be the subject of a formal written agreement between the HPC and thecustomer by fax or by mail. Any product returned without this prior agreement will be stored onbehalf of the customer but will not oblige HPC to provide a refund or replacement. This agreementis not however necessary when a non-professional buyer exercises his right to retraction as providedfor by French law.
In any event, no product returned more than 30 days after receipt of the product by the customerwill be accepted. The cost of returning a product is always the responsibility of the purchaser andthe risk in the product remains with him. Any returned product must be addressed to HPC’sregistered office. The choice of transporter will be made by HPC.
Products that are returned will be subject to formal inspection for both quality and quantity. Onceaccepted by HPC, a Credit Note for the value of the products valid for duration of six months will beissued. However, the right of a non-professional buyer to return goods for a refund remainsunchanged, so long as the products are safely returned to HPC.
In the case of an obvious defect or the delivery of the wrong product, once accepted by the seller,the buyer will either receive at the discretion of HPC, replacement products or a refund, no othercharges or penalties will be accepted.
10- RETENTION OF OWNERSHIP
The transfer of property in any standard or custom-made part is subject to the full payment of theinvoice, payment is understood to take place the day funds reach HPC’s bank account.
The prevision above do not prevent the risk in the product passing to the customer (in particular riskof loss, deterioration, and damage caused by the parts) once the parts have been dispatched ordelivered by HPC.
If a customer supplies a product for modification, repair or to be used as a model, the customerremains the owner of the original product and is responsible for the cost of their transport to andfrom HPC. The customer also accepts all risks related to their transport, any possible modificationby HPC, and any damage that might be caused.
11- APPLICABLE LAW - COURT OF JURISDICTION
Sales concluded with HPC are controlled by French law.
Any dispute which may arise between the two parties relating to the interpretation and/or executionand/or termination of the contract will be brought before tribunals of the jurisdiction where theregistered office of HPC is located, even in the event of an introduction of third parties or multipledefendants.
Index by name Volume �����Page1
AA
BB
AAccttuuaattoorr H type guide units �338 � 347
AAccttuuaattoorr miniature motorised actuator �292 � 298
AAiirr ccuusshhiioonn for insulation 252 � 253
AAnncchhoorriinngg bbrraacckkeett �248
AAnnttii--bbaacckkllaasshh spur gear �172 � 173
worm and wheel �158 � 159
AAnnttii--bbaacckkllaasshh spur gear �172 � 173
worm and wheel �158 � 159
AArrmm with rotating handle 70 � 72
AArrmm support �44
tension arm �112 � 113
AArrttiiccuullaattiioonn ball and socket joint �110 � 111
clevis components �112 � 116
for aluminium profile �254
spherical bearing �94 � 97
AAsssseemmbbllyy elements �106 � 127
BBaallll aanndd ssoocckkeett jjooiinntt �110 � 111
BBaallll kknnoobb female 83
BBaallll ttrraannssffeerr uunniitt �64 � 69
BBaarr keyway 289
toothed bar �16 � 17, 38 � 42, 60 � 61, 196 � 197
BBeeaarriinngg for aluminium profile �246
for profile guide �33 � 35
housed bearing assembly �46 � 49
locknut �80 � 88
panel holder �198
plastic ball �72 � 78
single rod clip �36
spherical �90 � 98
thrust bearing �68 � 71
BBeeaarriinngg hhoouussiinngg block bearing �54 � 66, �92 � 97
flanging bearing �51 � 53
linear bearing housing �210 � 216
BBeevveell bevel gear �115 � 135
precision bevel gear �12 � 13
BBiippoodd support base �81 � 83
BBlloocckk ballscrew bearing unit �282 � 284
linear bearing housing �210 � 213
screw for aluminium profile �267
BBoolltt index bolt 48 � 54
BBoonnnneett ffaasstteenneerr manual 126 � 128
BBrraacckkeett for aluminium profile �244 � 245
BBrraakkee for motor-gearbox �150
11
1
1
1
1
380 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
BBIndex by name Volume �����Page1
CC
BBrruusshh anti-static �138 � 141
cylindrical �132 � 137
panels �62 � 63
sealing brush strip �148
strip �28 � 29
strip by metre �142 � 147
BBrruusshh ppaanneellss for material handling �62 � 63
BBuusshh cylindrical polymer bush �24 � 44
for linear bearing �200 � 209
splined �111, 113 � 115
stroke rotary �45
CCaabbllee galvanised 258 � 259
CCaabbllee cclliipp �264 � 265
CCaamm bearing assembly �244 � 247
cam follower �253 � 259
CCaamm lleevveerr 98 � 99
CCaarrrriiaaggee adjustable slide �318 � 335
fixed centre carriage �243
high speed linear table �315 � 317
modular linear guide system �352 � 357
CCaasstteerr for use with aluminium profile �252 � 253
industrial �71 � 73
CCeellll ccaarrrriieerr aasssseemmbbllyy �282
CChhaaiinn cable carrier �231
per metre �98 � 101
plate �100 � 107
straight long link chain 276 � 277
CCiirrcclliipp 292 � 293
CCllaammpp 262 � 265
CCllaammpp lleevveerr indexing 92 � 97
CCllaammppiinngg ccoollllaarr �55
CCllaammppiinngg ppiinn 24 � 34
CClleevviiss ccoommppoonneenntt �112 � 113, 116
CClluuttcchhee �96 � 103
CCoonnnneeccttoorr for square tube �190 � 194
CCoonnvveeyyoorr component �75 � 98
CCoorrnneerr rreeiinnffoorrcceemmeenntt for aluminium profile �247
CCoouupplliinngg bellows �42 � 53
BoWex® curved tooth gear coupling �64 � 67
clutche �96 � 103
flexible �34 � 36
for servo-motors �28 � 53
GERWAH® �46 � 53
miniature �46 � 49
OLDHAM �38 � 39
1
1
1
1
1
1
1
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3811HPC
382 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Index by name Volume �����Page1
CCDD
EEFF
GG
PANAMECH - MULTIBEAM �28 � 33
PERIFLEX® �72 � 74
rigid �76 � 77
ROTEX® �68 � 69
ROTEX® GS �40 � 41
transmission �56 � 74
universal joint �78 � 94
CCoouupplliinngg bbaarr for aluminium profile �243
CCoovveerr for aluminium profile �230
for universal joint �80, 93
CCrroossss ccllaammpp adjustable �283 � 292
DDeetteeccttiioonn �281 � 292
DDoooorr sseeaall for aluminium profile �269
DDoooorrssttoopp �196
DDrriivvee mmoodduullee �285 � 357
EEllaassttoo mmoouunntt 197 � 217
EEnnccooddeeuurr for motor-gearbox �149
EEnndd ccaapp for tube �76 � 80, 188
EEyyee bboolltt 256 � 257
EEyyee ssccrreeww 280 �112 � 116
FFiixxiinngg 281 � 328
for aluminium profile �232 � 237, 246
FFoooott anchor foot for aluminium profile �249
bipod or tripod �81 � 83
fixed levelling foot support 232 � 251, �84 � 90
vibration dampening 254
FFrreeee rruunnnniinngg ccoonnvveeyyoorr rroolllleerr �54
GGaass sspprriinngg 150 � 153,�170 � 173
GGeeaarr anti-backlash spur gear �172 � 173
bevel �115 � 135
crossed axis helical �323 � 334
doublespur gear �168 � 171
ground spur gear �299 � 309
internal gear �163 � 167
pinion shaft �174 � 177
parallel axis helical �311 � 322
precision crossed axis helical classe 7 �116 � 125
precision parallel axis helical classe 7 �104 � 115
spur gear �195 � 297
spur gear classe 6 �94 � 101
spur gear classe 7 �46 � 79
spur gear classe 8 �80 � 93
1
1
1
1
1
1
1
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3831HPC
Index by name Volume �����Page1
IIJJ
GG
HH
GGeeaarrbbooxx in line spur gear �300 � 313
internal epicyclic servo reducer �294 � 299
miniature �237
offset spur gear reducer �288 � 293
right angle helical reducer �228 � 234
single or dual output �238 � 272
worm and wheel �186 � 227
GGeenneerraall tteerrmmss aanndd ccoonnddiittiioonnss ooff ssaallee 376,�314,�358,�363,�294
GGuuiiddee �28 � 32
GGuuiiddiinngg actuator guide kit �344 � 347
ballscrew �278 � 280
Drylin W �180 � 191
half-rail guide �224 � 231
linear �117 � 259
ring slide and track system �236 � 251
rotary motion �21 � 88
Utilitrack® linear guides �218 � 223
v-rail guidance system �232 � 235
HHaannddllee �199
carrying 100
cylindrical revolving handle 68 � 69
door handle for aluminium profile �259
for indexing 92 � 97
mushroom headed knobs91
spherical 82
star 76 � 77
HHaannddlliinngg �49 � 73
HHaannddwwhheeeell made to measure 56 � 67
small 6 lobe handle 80 � 81
HHeeaadd rod end �100 � 109
swivel head �40 � 41
support �43
HHeeaatt ttrreeaattmmeenntt technical informations �337 � 338
HHiinnggee �150 � 169, 204 � 206, 256 � 257
HHoossee ccllaammpp 284 � 288
IIddlleerr for plate chain �120 � 123
IInntteerrnnaall hhiinnggee ppiinn for aluminium profile �255
IInnddiiccaattoorr mechanical 129 � 137
IInnsseerrtt for suction cup �18 � 19
self-tapping 335 � 337
JJooiinniinngg bbaarr for aluminium profile �239
JJooiinniinngg ppllaattee for aluminium profile �240 � 242, 250 � 251
JJooiinntt for universal joints �80, 93
1
1
1
1
1
1
1
1
1
1
1
1
Index by name Volume �����Page1
JJ
LLKK
MMNN
OO
PP
JJoonnccttiioonn chain link �99, 101
connecting plate �36, 59, 77
KKeeyysstteeeell 289 � 291
KKnnoobb for operating 74 � 77, 82 � 83, 91
wing knob 78
LLaattcchhee 102 � 115
LLeeaaddssccrreeww �262 � 266, 274
LLeevveerr stainless steel 90
LLiinneeaarr sslliiddee motorised linear slide �348 � 351
LLiinneeaarr ttaabbllee �217, 310 � 317
LLiipp sseeaall for aluminium profile �270 � 273
LLoocckkiinngg aasssseemmbbllyy �116 � 127
LLoocckkiinngg bboolltt 44 � 47
LLoocckknnuutt for bearing �80 � 85
LLuubbrriiccaattoorr for ring �242
MMaacchhiinnee ttooooll ppaarrttss �13 � 24
MMaaddee ttoo mmeeaassuurree informations �335 � 362, �126 � 139
MMaaggnneettiicc ddoooorrssttoopp �200
MMaaggnneettiicc ssttuudd 124 � 125
MMaannuuaall bbeenncchh pprreessss �20 � 24
MMiinnii aaddjjuussttiinngg uunniitt mounted on profile �275 � 277
MMoodduullaarr lliinneeaarr gguuiiddee ssyysstteemm �279 � 280
MMoodduullaarr ssttrruuccttuurreess �207 � 280
MMoonniittoorriinngg ssyysstteemm Monitex® ROTEX® �70
MMoottoorr--ggeeaarrbbooxxee AC �151 � 168
DC �130 � 138
MMoottoorriisseedd lliinneeaarr aaccttuuaattoorr �286 � 291
MMuusshhrroommmm hheeaaddeedd bbuuttttoonn 89
NNuutt for aluminium profile �236
for screw 349, 364, 365
hexagonal headed thumb nut 88
knurled thumb nut 85 � 86
rivet nut 330 � 333
trapézoïdal �267 � 273, 275 � 276
OOnnee wwaayy nneeeeddllee bbeeaarriinngg �79
OOppeenn cchhaannnneell for aluminium profile �229, 262
PPaaddss brush panel �62 � 63
connecting plate �36, 59, 65, 67, 77
double sided anti-vibration pads 196
PPeeeekk®®precision spur gear �80 � 93
precision worm and wheel �28 � 39
PPiinn dowel 301 � 308
spring pin 294 � 3001
1
1
1
1
1
1
1
1
1
1
1
1
1
1
384 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Index by name Volume �����Page1
PP
RRSS
PPiinniioonn anti-backlash gear �172 � 173
bevel gear �115 � 135
chain sprocket �87 � 96
double spur gear �168 � 171
drive sprocket �108 � 112
hélical gear �311 � 334
internal gear �163 � 167
precision hélical gear �103 � 125
precision shaft �46 � 51
precision spur gear �45 � 101
shaft �174 � 177
spur gear �195 � 297
tensioner plate �106 � 114
PPoossiittiioonniinngg aanndd iinnddeexxiinngg 23 � 54
PPootteennttiioommeettrree for motor-gearboxes �150
PPoowweerr ssuuppppllyy �140 � 143
PPrrooffiillee aluminium �219 � 230
dual purpose strip for aluminium profile �268
guide �30 � 32
sliding profile �202 � 203
stainless steel �218
PPuulllleeyy imperial �80 � 83
timing pulley �18 � 26, 43 � 51, 62 � 73
QQuuiicckk ffiittttiinngg cable terminals 266 � 267
QQuuiicckk lliinnkk 278 � 279
RRaacckk standard �179 � 191
precision �42 � 43
RRiiggggiinngg ssccrreeww 272 � 275
RRoottaarryy ddaammppeerr 220 � 223
RRoottaarryy ttaabbllee Igus �336 � 337
RRiigghhtt aannggllee hheelliiccaall rreedduucceerr gearbox �228 � 286
RRiinngg sslliiddeess aanndd ttrraacckk ssyysstteemm Hepco �236 � 251
RRiivveett 324 � 328
RRoodd for clamp �37 � 39
SSccrreeww BHC 360
CHC 350 � 355
FHC 356 � 357
for aluminium profile �237
HC 358 � 359
knurled thumb screw 84
leadscrew �277 � 281
1
1
1
1
1
1
1
1
1
1
1
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3851HPC
386 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Index by name Volume �����Page1
SS
SS
male wing knob 79
nylon 347 � 349
precision worm and wheel �15 � 39
shoulder 340 � 345
spring plunger 36 � 41
stainless steel 342 � 345, 354 � 361
steel 340 � 341, 350 � 353
thumb screw 84, 87, 361
worm and wheel �137 � 159
SSccrreewwjjaacckk �299 � 309
SSeeaalliinngg ssttrriipp �174 � 177
SSeerrvvoo aammpplliiffiieerr �144 � 148, 167
SShhaacckkllee bow shackle with eye bolt 270 � 271
dee shackle with eye bolt 268 � 269
SShhaafftt centerless ground shaft �22 �23
flexible �56 � 59
for linear guide �192 � 197
splined �110, 112
SShhaafftt ccllaammpp and locking assembly �76 � 77, 116 � 127
SShhiimmss precision stainless shims �86
SShhoocckk aabbssoorrbbeerr 224 � 230
SSlliiddee guiding slide �117 � 251
roller guide �26 � 27, 50 � 51
SSlliiddee linear �117 � 191
telescopic �178 � 185
SSppaacceerr cylindrical 309 � 313
hexagonal 314 � 323
SSppeeeedd ccoonnttrroolllleerr adjustable 218 � 219
SSpphheerriiccaall bbeeaarriinngg �94 � 97
SSpprriinngg compression 154 � 166
die spring 180 � 187
extensino 167 � 177
torsion 178 � 179
SSpprriinngg llooaaddeedd llaattcchh 122 � 123, �201
SSpprriinngg llooaaddeedd pplluunnggeerr 37
SSpprriinngg llooaaddeedd ppoossiittiioonn sswwiittcchh 36
SSqquuaarree ttuubbee ssttrruuccttuurreess �187 � 206
SSttoopp doorstop �258
panel stop �197
SSttrriipp sealing strip �174 � 177
SSuuccttiioonn ccuupp magnetic stud 124 � 125
with bellows �14 � 19
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3871HPC
Index by name Volume �����Page1
SS
TT
UU
WWVV
SSuuppppoorrtt fixing support �195
for detector �260 � 261
for guides �46 � 47
for guiding shaft �198 � 199
locating bolt support bracket 42 � 43
shaft support for aluminium profile �266
support bracket �45
SSuuppppoorrtt bbaarr �42
TTeeeetthh’’ss ssiizzee gears �194
racks �178
TTeennssiioonneerr for plate and chain �106 � 114
TThheerrmmoommeettrree 138 � 147
TThhrreeaaddeedd aaddjjuussttaabbllee ffoooott 233
TThhrreeaaddeedd bbaarr 339
TThhrreeaaddeedd sslleeeevveess cylindrical 338
hexagonal 322 � 323
TThhrruusstt bbeeaarriinngg �68 � 71
TTiimmiinngg bbeelltt for positionning �53 � 57, 74 � 75
for transmission �27 � 34
imperial �81
per metre �35, 58, 76
TTooggggllee ccllaammpp 116 � 121
TTooggggllee llaattcchhee 101 � 128
TTrraacckk curved �126 � 127
straight �124 � 125
TTrriippoodd support base �83
TTuubbee square �189
UU bboolltt 282 � 283
UUnniivveerrssaall jjooiinntt �78 � 94
VV bbeelltt detachable �12 � 15
WWaasshheerr dynamic 188 � 191
self aligning 362
spring washer �87
standard 363
WWeeaarr ssttrriipp for plate-chain �128 � 129
WWhheeeell belt tensioner rollers �104 � 105
conveyor wheel �52 � 53, 56 � 61
idler sprocket �114 � 118
roller wheel for aluminium profile �274
rubber tyred wheel �70
worm and wheel �137 � 159
WWiirree tthhiimmbbllee for cable 260 � 261
WWoorrmm aanndd wwhheeeell precision range �15 � 39
1
1
1
1
1
1
1
1
1
1
1
1
1
388 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Part number Volume ���� Page61Part number Volume ���� Page61
BDS support arm �44
BFM flanged nut �273, 276
BG(C) coupling OLDHAM �38 � 39
BH single housed bearing assembly�46 � 49
BHC socket head button screw 360
BISF ball transfer unit �68
BL, BLH, BLHTright angle helical �248 � 271
BLHB, BLHO, BLHI right angle helical �252 � 268
BLHM right angle helical �253 � 272
BLM spring loaded plunger 37
BLOC doorstop �196
BPM spring plunger 38 � 39
BPOM ball transfer unit �69
BPF, BPFL, BPP flanged bearing �51 � 53
BPTR end cap �76 � 77
BRI panel holder �198
BS Panamech-Multibeam �28 � 29
BSB ballscrew bearing unit �282
BSM spring plunger 40 � 41
BSP compact precision slide�126 � 131
BSPT single rod clip �36
BTC end cap �78 � 80, 188
BTEU, BTHD ball transfer unit �66 � 67
BUC shaft and bush splined�112 � 115
BUT panel stop �197
BWU compact precision slide�132 � 137
B-ZY(ss) cylindrical mount 206 � 209
CCAB cable 258 � 259
CAP plate chain �100 � 106
CC, CT locking assembly �108 � 109
CCL(ss) wire thimble 260 � 261
CD compression spring 154 � 165
CDASLM air cushions 252 � 253
CDR cable for clamping pin 35
CF(S), CFES cam follower �258 � 259
CFC spring loaded 36
CFF(ss) rod end �105, 107
CFU cam follower �256 � 257
CHA hinge �154 � 161, 169, 204 � 206
CHA-R hinge �164 � 168
CHC socket head screw 350 � 355
CHM, CHMR reducer �186 � 199
CHM-BR, CHM-X arm and shaft �200 � 201
1
1
1
1
1
1
1
1
1
1
1
1
203R PERIFLEX® �74
712 handle 74 � 76, 89, 91
AAAG, ABG toothed bar �38,196
AB anti-backlash wormwheel �173
ABL antistatic brush �140 � 141
ABM anti-backlash wormwheel�158 � 159
ABS anti-backlash wormwheel �172
AC hook 106 � 107
ACA splined shaft �110
ACM bonnet fastener 126 � 128
ADAG suction cup threaded insert �19
ADG, ASG toothed bar �39, 197
ADL eye bolt 256 � 257
ADS servo amplifier �148
AF rigid coupling �76
AFM, ASM Iglidur cylindrical polymer bush�26 � 31
AH fixed tensioner plate �107
AK, AKD, AKN coupling Gerwah �50 � 53
ALI power supply DC �140 � 143
APB, APB BOUadjusting rod �37 � 39
ARL plastic flexible rack �191
AT timing pulley �62 � 73
AT toothed bar �60 � 61
AT timing belt �74 � 75
AT-M timing belt per metre �76
AT-P connecting plate �77
AT-ZY elasto mount 198 � 199
A-W imperial pulley �80
AWMP aluminium shaft �193
A-ZY(ss) cylindrical mount 202 � 205
BB, B/Eco bevel gear �116 � 117, 122 � 123
B332 reducer �237
B3PAN Panamech-Multibeam �33
BAB clamping pin 24 � 34
BAG locking assembly �106 � 107
BAP clamping collar �55
BBF, BFC coupling �63
BBP plastic thrust bearing �68
BC Panamech-Multibeam �30 � 31
BCA splined bush �111
BCH mushroom knob 89
BCM cylindrical brushes �132 � 137
1
1
1
1
1
1
1
11
NEW
NEW
NEW
NEW
NEW
NEW
NEW
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3891HPC
Part number Volume ���� Page61Part number Volume ���� Page61
DVC adjustable speed controller 218 � 219
D-ZY elasto buffer 210, 213
EE reducer �228 � 234
EAS rivet nut 330 � 333
EBM u bolt 282
ECF well nut 197
EDS support bracket �45
EFSM Igubal flange unit �66
EFTC fixing support �195
EHD internal epicyclic servo reducer �294 � 299
EIM stainless steel u bolt 283
EKN coupling GERWAH® �46 � 47
EMS, EML, EMR thumb screw 85 � 88
EP spring pin 294 � 297
ERC quick fitting cable 266
ESCB, ESSB bipod �81 � 82
ESST tripod �83
ET extension spring 168 � 177
E-X, E-DX output shaft �235
E-ZY cylindrical buffer 214 � 215
FFB, FB/Eco bevel gear �120, 126
FBL brush strip �142 � 145
FCP fixed centre carriage �243
FDS(Q) flexible shaft �56 � 61
FE stainless steel band 288
FF reducer �288 � 293
FGWA end support �199
FHC countersunk screw 356 � 357
FIB motor-reducer AC �152 � 153
FIRST servo amplifier �145 � 147
FRT rotary damper 220 � 223
FS spring washer �87
FTSN supported shaft �192
FU nut for bearing �84 � 85
GG, GD universal joint �82 � 83
G spur gear �198 � 287
GA, GSI gas spring 150 � 153, �170 � 173
GAL conveyor wheel �52 � 53, 56 � 61
G-AR quick universal joint �86
GB brass spur gear �213, 237, 284
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1CHM-MOT motor-reducers AC �163 � 166
CHN(ss) straight long link chain 276 � 277
CHT asynchronous AC motor�158 � 162
CHTRB right angle helical �238 � 241
CHTRP right angle helical �242 � 247
CLA indexing handle 96 � 97
CLB clamp lever 94 � 95
CLG moulded spur gear �238, 255, 269, 284
CLM(ss) clevis components �114 � 115
CLS, CLP clevis components �112
CLL, CLLP clevis components �113
CLS(ss), CLP(ss) clevis components �116
CMA eye screw 280
CMM(ss) rod end �104, 106
CR imperial section rack �184
CRM moulded nylon rack �186 � 187
CS, CSH locking assembly 285 � 287
CSS(ss) spherical bearing �94 � 95
CT, CTH telescopic universal joint �90 � 92
CTF, CTM insert for suction cup �18
CT-ZY diabolo mount 200 � 201
CX, CY circlip 292 � 293
DD spring in metre 167
DB, DB/Eco bevel gear �118, 124
DBC Panamech-Multibeam �32
DBL idler �120 � 123
DCA, DCG, DFG suction cup �15 � 17
DG double spur gear �168 � 171
DGS rod end �100 � 103
DH dowel pin 301 � 303
DHX dowel pin 306 � 307
DIL, DIA, DIV locking bolt 44 � 47
D-KON elasto buffer 216 � 217
DKN coupling GERWAH® �48 � 49
DOG motor-reducer DC �135 � 137
DOMI adjustable slide �318 � 335
DP dowel pin 304 � 305
D-PAR(ss) elasto buffer 216 � 217
DR flexible rack �190
DSF clutche �102 � 103
DST, DT pinion shaft �174 � 177
DUN motor-reducer AC �156 � 157
DUN motor-reducer DC �138
1
1
1
1
1
1
1
1
1
1
1
1
1
1 NEW
NEW
NEW
NEW
NEW
NEW
390 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Part number Volume ���� Page61Part number Volume ���� Page61
KKB, KBS linear bearing �204 � 205
KB-OP linear bearing �208
KGLM Igubal® spherical bearing �97
KGS ballscrew �280
KH linear bearing �200
KK keysteel 290 � 291
KR plastic cam follower �253
KS keysteel 289
KSM cylindrical nut �270
KSTM Igubal® block bearing �64 � 65
KM bearing locknut �80
KBWW linear bearing �203
LLA linear table �315 � 317
LAC cam lever 98 � 99
LAT linear actuator �286 � 291
LB(E) miniature linear bearing �202
LC clutche �100 � 101
LFM leadscrew �262 � 263, 274
LINK motor-reducer AC �155
LOQ manual lock �201
LR precision locknut �82 � 83
LRH leadscrew �266
LRM trapézoïdal nut �272, 275
LRR spring loaded latch 122 � 123
LRX linear roller slide �160 � 167
LSAG precision linear rotary �118 � 125
LSM leadscrew �264 � 265
LVT miniature motorised actuator�292 � 298
LWH high rigidity linear slide�150 � 159
LWL linear ball slide �138 � 149
MM cover for universal joint �93
M, PM worm and wheel set �139 � 157
MAN lever 90
MAX motor-reducer DC �132 � 133
MB stop washer �81
MC shock absorber 225 � 227
MCL sleeves 338
MCS brush panels �62 � 63
1
1
1
1
1
1
1
GBS nut for ballscrew �281
GCB curved track �126 � 127
GDR straight track �124 � 125
GE toggle latch 102 � 104
GE spherical bushing �90 � 93
GG ground spur gear �300 � 309
GGB wing knob 78
GGP wing knob 79
GLB small 6 lobe female handle 80
GLP small 6 lobe male handle 81
GLT telescopic slide �178 � 185
GMC, GMK guide �28 � 35
GP toggle latch 105
GPB threaded spherical knob 82
GR centerless ground shaft �23
HH, HD needle roller universal joint�84 � 85, 87
H helical gear �324 � 334
HBM half rail guide �228
HC set screw 358 � 359
HCV, HRV v-rail guidance system�232 � 235
HEDL encodeur �149
HFL one way needle bearing �79
HG, HPG spur gear �292 � 296
HK manual locking clam �170 � 173
HLU(T) handwheel 66 � 67
HS, HSE, HSB spacer 314 � 315, 320
HSS shoulder screw 340 � 341
HTD toothed bar �16 � 17
HTD timing pulley �18 � 26
HTS, HTT half rail guide �227
HW half rail guide �226
IIBJ 180° ball and socket joint �110
IN internal gear �163 � 167
INS insert 335 � 337
JJ, XJ coaxial reducer �300 � 305
JB chain spring tensioner �114
JCD, JCS universal joint �88 � 89
JFM, JSM Iglidur® cylindrical polymer bush�24 � 25
1
1
1
1
1
1
1
1
1
1
1
1
NEW
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3911HPC
Part number Volume ���� Page61Part number Volume ���� Page61
PAV vibration dampening foot 254
PB plastic ball bearing �72 � 73
PBG precision bevel gear 12 � 13
PCF conical flexible mount 250 � 251
PCLA handle 92 � 93
PCP cell carrier assembly �282
PCS(ss) chain sprocket �91 � 96
PDM brake �150
PDU motorised linear slide �348 � 352
PF reducer �203 � 223
PFC fixed rubber foot 232
PFL coupling P-Flex �37
PFM articulated foot 247
PG spur gear �198 � 287
PGR folding cylindrical revolving 69
PGRR, PGRS precision rack 42 � 43
PGT sliding profil �202
PHG precision helical gear 104 � 115
PKL anti-vibration pad 196
PLB, PLN, PLS cylindrical spacer 309 � 313
PLC, PLT magnetic stud 124
PMC flexible machine mount 248 � 249
PNA coupling PERIFLEX® �72 � 74
PO, PX carrying handle 100
PO handle �199
PP reducer �225 � 227
PPD clamping pin 48
PPF clamping pin 49
PPS precision pinion shaft 46 � 51
PR articulated foot 234 � 237 �84 � 87
PR idler sprocket �114 � 118
PRES manual bench press �20 � 24
PRF profile �218 � 274
PRL, PRZ wear strip �128 � 129
PRS articulated foot 244 � 246
PRT rotary table �336 � 337
PS precision stainless shims �86
PSG precision spur gear 52 � 79
PSG-DL precision spur gear 80 � 93
PSG-HC precision spur gear 94 � 101
PSG-PK precision spur gear 80 � 93
PSP support profile �203
PT drive sprocket �108 � 112
PT timing pulley �43 � 51
PTAF articulated foot 240, 2421
6
6
6
6
1
1
6
1
1
1
1
1
1
1
6
6
1
1
1
1
1
6
1MDB, MTB bevel gear �131
MDPOT potentiometre �150
MDR(ss) dee shackle 268 � 269
MEB bevel gear �130
MEP cylindrical handle 68
MET(C) Metafram® cylindrical bush�32 � 39
MF shock absorber flange 229
MFB(S) bellows coupling �42 � 45
MFB, MHB bevel gear �132
MH arm with handle 70 � 72
MHQ arm with handle 71
MHS, MHW coupling �34 � 35
MHX sleeves 322 � 323
MIX adjustable tensioner plate �106
MLY(ss) bow shackle 270 � 271
MMR rack �182
MONITEX monitoring system �70
MPB, MPE, MPSspacer 316 � 319, 321
MR(S) rack �182 � 183
MRA(ss) quick link 278 � 279
MTD coupling �36
MURP mini-profile mounted adjusting unit�275 � 277
MXL imperial timing belt �81 � 83
NNANO servo amplifier �144
NAST cam follower �254
NCT connector �190 � 194
NIN self locking nut 365
NJM adjustable clamp �292
NK, NW Drylin N® miniature guiding system�174 � 178
NPCR, NPR, NSAadjustable clamp �288 � 290
NPTF, NPTR adjustable clamp �283 � 287
NSB, NSO linear bearing housing�210, 212
NSR adjustable clamp �291
NT, NH coaxial reducer �307 � 313
NTM set screw 361
OOP indicators 130 � 137
PP reducer �202 � 222
PAM articulated foot 243
PAMF articulated foot 240, 242
PAT articulated foot �88 � 89
1
1
1
1
1
1
1
1
1
1
1
1
1
1
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
392 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Part number Volume ���� Page61Part number Volume ���� Page61
SS chain sprocket �87 � 90
S, SF stainless steel ball bearing�76 � 78
S2B, S2O linear bearing housing �211, 213
SA(KH) linear bearing housing �201
SAS clutche �98 � 99
SBR chain per metre �98 � 99
SBS chain per metre �100 � 101
SC rigid coupling �77
SCA, SCE cable clamp 262 � 265
SCH toggle clamp 121
SCR suction cup threaded insert �19
SDA, SDB locating bolt support bracket 42 � 43
SDG(ss) support bracket �46 � 47
SEH, SEV toggle clamp 119 � 120
SER magnetic doorstop �200
SFE, SME rod end Unibal® �108 � 109
SFWR end support �198
SH helical gear �312 � 322
SHA handwheel 58 � 60
SHN nut 349, 364
SHS, SHSS shoulder screw 342 � 345
SHTC, SHTP Drylin® linear table �310 � 314
SHW washer 348, 363
SW(H) worm and wheel �138 � 152
SK star knob 77
SKM hexagonal nut �271
SLB(ss) clamping pin 50 � 51
SLBS indexing 54
SLBW(ss) index bolt 52 � 53
SLH, SLV toggle latch 116 � 118
SLM guide �352 � 357 �279 � 280
SMLS linear table �217
SPIT levelling support �90
SR rack �181
SRG adjustable latch 108 � 111
SRP slotted spring pin 298 � 300
SRS plastic flexible rack �191
SSB stainless steel bevel gear �128
SSDB, SSTB, SSFB stainless steel bevel gear �129
SSE Unibal® spherical bearing �96
SSG stainless steel spur gear �210 � 268
STC elasto buffer 230
STL guidance brush �29
STL detachable V belt �12 � 15
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
PTA(ss) articulated foot 238 � 239, 241
PTP detachable V belt �13
PTR idler chain sprocket �110
P-X, P-DX output shaft �224
PXHG precision helical gear 116 � 125
PW, PSW precision worm and wheel 16 � 38
PWG precision worm and wheel 27 � 39
QQ6 radial bearing �74 � 75
QFM, QM Oilite® cylindrical bush �40 � 44
RR rack �180
R Utilitrack® rail �236 � 241
R die spring 180 � 187
RAG roller guide �26 � 27
RAG-FLOW roller track �50 � 51
RAS(ss) 90° ball and socket joint �111
RAT, RRT Utilitrack® bearing assemblies �248
RBS dynamic washer 188 � 191
RCC, RCX self aligning washer 362
RE belt tensioner roller �104
RGS coupling ROTEX® GS �40 � 41
RIV rivet 324 � 328
RJA sealing strip �174 � 177
RJZM, RJUM Drylin® bearing �207, 216
RLB lubricator for ring Utilitrack® �242
RLJ bearing assembly long version�244 � 245
RLR Rollring® chain tensioner�108 � 109
RLX free running conveyor roller �54
RMSA shock absorber 228
RNAST cam follower �255
ROB, ROS caster �70 � 71
ROCPL, ROCTR caster �72 � 73
RPB ballscrew bearing unit �283
RPP timing belt �27 � 35
RPP-P connecting plate �36
RS support bar �42
RSH centerless ground shaft �22
RSJ bearing assembly short version�246 � 247
RT(T), RTL locking assembly �122 � 127
RTE coupling ROTEX® �68 � 69
RTK, RTN coupling BoWex® �64 � 67
RVT, RVI dual output reducer �274 � 286
1
1
1
1
1
6
6
6
1
NEW
NEW
NEW
NEW
NEW
NEW
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3931HPC
Part number Volume ���� Page61Part number Volume ���� Page61
UGPL actuator guide kit �345
UTK Utilitrack® linear guide �218 � 223
VV3RA handwheel 61 � 63
VAP magnetic stud 125
VKM square nut �267
VML set screw 84
VMS set screw 87
VPRA handwheel 56 � 57
VRR, VRT screwjack �299 � 309
VT(A) clutche �96 � 97
WW-F imperial pulley �80
W(H) worm and wheel �138 � 156
WFRM flanged nut �269
WSRM cylindrical nut �268
WS, WW, WJUM Drylin W® rail �180 � 191
XXG spur gear �220 � 289
XRP belt tensioner roller �105
XZK idler chain sprocket �111
YYG spur gear �220 � 289
ZZA, ZB shaft for linear guide �194 � 195
ZB bevel gear �133 � 134
ZDB, ZTB, ZFB bevel gear �135
ZG, ZPG spur gear �204 � 291
ZGDR spur gear �192 � 193
ZH helical gear �325 � 333
ZHG, ZHPG spur gear �293 � 297
ZIN internal gear �163 � 167
ZM, ZPM worm and wheel �139 � 157
ZR rack �185
ZSH helical gear �313 � 321
ZSW, ZW worm and wheel �138 � 156
1
1
1
1
1
STRIP sealing brush strip �148
STU stroke rotary bush �45
SUA chain per metre �98 � 99
SUP locking assembly �116
SVG adjustable latch 112 � 115
TT toothed bar �40 � 42
T timing belt �53 � 57
T timing pulley �43 � 51
T spring in metre 166
T-M timing belt per metre �58
T-P connecting plate �59
T0 torsion spring 178 � 179
TAC(ss) rigging screw 272 � 273
TAD plastic foot 233
TB(ss) axial thrust bearing �69 � 71
TB, TB/Eco bevel gear �119, 125
TC nylon screw 347
TCC(ss) rigging screw 274 � 275
TDSA support head �43
TEL speed drive controller �167
TIF threaded bar 339
TIN, TINGA thermometre 138 � 147
TK linear bearing �206
TK-OP linear bearing �209
TM suction cup threaded insert �18
TOC, TOL swivel head �40 � 41
TPX universal tension arm �112
TR(M) rack �188 � 189
TRE universal tension arm �112
TS, TW Drylin® linear slide �168 � 169
TTQ locking assembly �117 � 121
TUBE square tube �189
UU universal joint �78 � 80
UCF flange bearing�55, 59, 62, �93, 96
UCFL flange bearing�56, 60, 63, �94, 97
UCP block bearing �54, 58, 61, �92, 95
UCT take up bearing �57
UGAC, UGET actuator guide kit �347
UGCG actuator guide kit �346
UGH H type guide unit �338 � 342
UGPC actuator guide kit �344
1
1
1
1
1
1
1
1
1
NEW
NEW
STANDARDCUSTOMISED
Alternative bores
Keyways
Hole for dowel pin
Tapped hole
Precision gears
396 1 Volume 1 2011 HPC www.hpceurope.com - Tel. +33 (0)4 37 496 496
Send us your drawings
Module 0.5 to 3
Up to 250 teeth (depending on module)
FROM DRAWINGS
Contact our TECHNICAL DEPARTMENTon +33 437 496 496
Made to measure
See
Volume 6
Fax. +33 (0)4 37 490 055 - [email protected] Volume 1 2011 3971HPC
ItaliaCt Meca S.r.l.Corso G. Marconi 10
10125 Torino - Italia
www.ctmeca.com
E-mail: [email protected]
Tel: +(39) 011 760 95 05Fax: +(39) 011 760 91 51
FranceEngrenages HPC58, chemin de la Bruyère
69570 Dardilly (Lyon) - France
Tél. : +33(0)4 37 496 496
Fax : +33(0)4 37 490 055
E-mail: [email protected]
www.hpceurope.com
United KingdomOndrives Ltd. Foxwood Industrial Park
Chesterfield, Derbyshire, S41 9RN, UK
Tel.: +44 1246 455 500
Fax: +44 1246 455 522
E-mail: [email protected]
www.ondrives.com
HPC in Europe
Company: ...................................................................................................................................
Sector: .........................................................................................................................................
Business adress: .........................................................................................................................
Postcode: .................... Town: ...........................................................Country: ...........................
Mrs Mr:...........................................................................................................................
Job title: ......................................................................................................................................
Tel.: .................................................................Fax:......................................................................
Size of company: 0 to 50 51 to 150 151 to 400 401 +
Fill in the request form on-line
or complete this form and fax it to:
Fax. +33(0)4 37 490 055
FREE catalogues are available on request from :
www.hpceurope.com“Catalogue” section
by post immediatedownload