HP WH SERIES HEAT PUMP WATER HEATERM1 SERIES – specifications Model HP200M1 HP250M1 Efficiency...
Transcript of HP WH SERIES HEAT PUMP WATER HEATERM1 SERIES – specifications Model HP200M1 HP250M1 Efficiency...
HP WH SERIES
HEAT PUMP WATER HEATER 200l – 300l
HP200M1, HP250M1 / HP200M3, HP250M3, HP250M3C /
HP200S1, HP300S1
MAIN ADVANTAGES
Plug & play, easy to install
Trendsetting
Low upfront costs will deliver energy cost savings
Replace the water tank of aging systems for
running cost savings
Compatible with many other energy sources
TECHNICAL BENEFITS
HPWH-Compressor
Special designed for heat
pumps to maximum the
efficiency
Bottom Boost Condenser
Extra bottom condenser enlarge
the total heat exchange area to
deliver more hot water and
contributes to better efficiency
Micro-Channel Condenser
The micro-channel condenser
has larger contact surface for
better heat transfer performance
and less refrigerant consumption
Condenser Micro-Channel VS. Coil Pipe
CONTROL SYSTEM
Control panel
5“ LED display with touch control
4 resp. 5 working modes
AUTO mode
Heat pump work in priority and electric heater work as backup to
deliver hot water in pre-set temperature
ECO mode
Heat pump use the off-peak electricity to minimize the expenses
ECO+ mode (S series only)
Both heat pump and electric heater only work under off peak condition
BOOST mode
Heat pump and electric heater start up at same time to deliver hot
water as fast as possible
VACATION mode
Stop working during vacation then back to AUTO mode
just one day before user back from vacation
M-SERIES
Explosive view Operating modes
(external, exhaust and ambient air)
M3
M3
M1 / M3
M-SERIES – features
COMFORT
Working modes: Auto / Eco / Boost / Vacation
Additional heating element
Timer control Off Peak Power settings
Hot water volume and temperature display
EFFICIENCY & ENERGY SAVING
COP (A15 / EN16147) = 3,25 (M3)
Working temperature: -5°C (M3)
Micro-Chanel condenser
QUALITY
Magnesium anode protection
Titanium enamel steel tank
50mm PUF insulation
DESIGN
LED display with touch control
Off peak power
Additional energy source connection (M3 only)
SOLAR CONCEPT
Solar heat pump system (M3)
Combine the HP with a solar collector to
increase the share of renewable energy
Solar priority to save as much energy as
possible
Reduces electricity consumption
No additional solar tank is needed
Easy connection with preinstalled tube-
bundle heat exchanger of 1 m³
Preinstalled connections for temperature
sensor pockets
M1 SERIES – specifications
Model HP200M1 HP250M1
Efficiency class A+ A+
Annual energy consumption (L), kWh 852 845
Capacity, l 195 246
Refrigerant R134a R134a
COP (A15 / EN16147) 2,90 2,90
Sound power, dB(A) 60 60
Temp range (heat source), ℃ 7..35 7..35
Power input (heat pump only), W 650 650
Heating up time 7℃, h:mm / /
Heating up time 15℃, h:mm 4:30 5:50
Electric backup, W 2150 2150
Extra heat exchanger No No
Loading (QTY. 40HQ), units 51 51
dimensions [mm]
A B C D
HP200M1 629 265 994 1670
HP250M1 629 265 1302 1965
M3 SERIES – specifications
Model HP200M3 HP250M3 HP250M3C
Efficiency class A+ A+ A+
Annual energy consumption (L), kWh 895 913 906
Capacity, l 195 246 240
Refrigerant R134a R134a R134a
COP (A7 / EN16147) 2,85 2,85 2,85
COP (A15 / EN16147) 3,30 3,30 3,30
Sound power, dB(A) 59 59 59
Temp range (heat source), ℃ -5..35 -5..35 -5..35
Power input (heat pump only), W 495 495 495
Heating up time 7℃, h:mm 6:12 8:12 8:00
Heating up time 15℃, h:mm 4:40 6:21 6:21
Electric backup, W 1500 1500 1500
Extra heat exchanger No No Solar or
boiler
Loading (QTY. 40HQ), units 51 51 51
dimensions [mm]
A B C D E F
HP200M3 629 270 980 1692 180
HP250M3 629 270 1275 1987 180
HP250M3C 629 270 1275 1987 590 180
S-SERIES
EXPLOSIVE VIEW OPERATING MODE
S-SERIES – features
COMFORT
5 Working modes: Auto / Eco / Eco+ / Boost / Vacation
Low noise (external unit)
Additional heating element
Signal control or Timer control Off Peak Power settings
Temperature and hot water volume display
EFFICIENCY & ENERGY SAVING
COP (A7, EN16147) = 3,20
Working temperature: -7°C..45°C
Micro-Chanel condenser
QUALITY
Magnesium anode protection
Titanium enamel steel tank
50mm PUF insulation
DESIGN
Flexible installing options with long distance
between external unit and storage of 20 m
LED display with touch control
Off peak power mode
S1 SERIES – specifications
Model HP200S1 HP300S1
Efficiency class A+ A+
Annual energy consumption, kWh 804 (L) 1304 (XL)
Capacity, l 195 293
Refrigerant R134a R134a
COP (A7 / EN16147) 3,09 3,20
COP (A15 / EN16147) 3,70 4,30
Sound power, dB(A) 64 64
Temp range (heat source), ℃ -7..45 -7..45
Power input (heat pump only), W 665 885
Heating up time 7℃, h:mm 4:08 4:48
Heating up time 15℃, h:mm 3:26 3:58
Electric backup, W 2150 2150
Extra heat exchanger No No
Loading QTY. 40HQ 60 units 51 units
dimensions [mm]
A B C D E F G H
HP200S1 542 272 311 411 1530 1765 681 844
HP300S1 630 281 320 420 1519 1795 681 844
TECHNICAL DATA
Model HP200M1 HP250M1 HP200M3 HP250M3 HP250M3C HP200S1 HP300S1
Efficiency class A+ A+ A+ A+ A+ A+ A+
Annual energy consumption, kWh
852 845 895 913 906 804 1304
Capacity, l 195 246 195 246 240 195 293
COP (A7 / EN16147) / / 2,8 2,81 2,82 3,09 3,20
COP (A15 / EN16147) 2,90 2,90 3,25 3,2 3,22 3,70 4,30
Sound power, dB(A) 60 60 59 59 59 64 64
Temp. (heat source), ℃ 7..35 7..35 -5..35 -5..35 -5..35 -7..45 -7..45
Average input (HP only), W 650 650 495 495 495 665 850
Heating up time 7℃, h:mm / / 6:12 8:12 8:00 4:08 4:48
Heating up time 15℃, h:mm 4:30 5:50 4:40 6:21 6:21 3:26 3:56
Electric backup, W 2150 2150 1500 1500 1500 2150 2150
Extra heat exchanger No No No No Yes No No
M1 M3 S1 Monobloc
Ambient Air Monobloc
External Air
Split
External Air
THANK YOU FOR YOUR ATTENTION
GREENoneTEC Solarindustrie GmbH
Industriepark St. Veit, Energieplatz 1
9300 St. Veit/Glan
www.greenonetec.com