HP Products Duct Catalog

H-P Products, Inc. • 800.860.TUBE (8823)Fax: 330.875.7155 • www.metflo.com

When Ordering,Please SpecifyType of Material:• Stainless• Galvanized Steel

© 2002 H-P Products, Inc. 1

METFLO® DUCTCOMPONENTS

DUST, FUME, TRIM& WASTE REMOVAL


© 2002 H-P Products, Inc.2 Can’t Find What You Need? Call Us!Catalog Part Variations Available Upon Request.

Services

H-P Products, Inc., an ISO 9002 Certified Company,is a leading supplier of tubular components forindustrial air systems.

INDEXSERVICES. ..................................... 2

SPECIAL PARTS. ........................... 3

ROLLED LIP DUCT

Straight Duct, Clamps ................... 4

Adjustable Sleeves ......................... 5

Elbows ...................................... 6-10

Fittings .................................... 11-13

Supplemental Components .... 14-16

ACCESSORIES

Hangers, Saddles ......................... 17

Hose & Clamps

FLANGED END DUCT

Straight Duct, Flanges ................. 18

Elbows .................................... 19-24

Fittings .................................... 25-28

Supplemental Components .... 29-30

CATALOG PART VARIATIONSVariations of our standard catalog parts can be manufactured to your unique requirements. With your drawing orspecification, we can normally turn around a quote within 24 hours and produce the part within 1 week.

DELIVERYFast delivery is available on a wide selection of in-stock METFLO® Duct Components. We’ll also make everyeffort to meet emergency requirements for non-stock items.

ISO 9002 CERTIFIEDH-P Products, Inc. is ISO 9002 Certified! This accomplishment was achieved after a two-year planning andimplementation process to assure that our customers receive the highest quality products and service possible.ISO-9002 defines the correct and proper operation of a company in all aspects of quality, from sales tomanufacturing and service. An accredited, third party assessor audited H-P Products to verify compliance withall documented procedures. H-P Products is in select company with few other central vacuum system manufac-turers and fabricated air systems tubing suppliers with ISO certification.

NOTESpecifications subject to change without notice, without incurring any obligation on our part.

PRICINGAll prices are FOB factory.Terms: Net 30 daysPrices are in U.S. dollars

Prices and specifications are subject to change without notice, and without obligation. All material is invoiced atthe price in effect at time of shipment. All prices and discounts are based on one shipment to one destination.Please see current price list for pricing.

S-120-0048 • 04/15/02

SPECIAL SERVICES• ID Buff (Tag Free) finish to eliminate snags with the potential of causing line blockages. Weld seams and

rolled edges are polished smooth and then tested for snags with fine mesh nylon material.

• OD Buff finish is available in T304 and T316 Stainless material.

• Painted finishes are also available.

• Special systems engineering assistance. Our engineers can design/size a system for you based upon thesize, quantity and location of your pick-up points.

• Custom flat back elbows with replaceable wear plates are available for highly abrasive applications.

• Special boxing and packaging available.




SPECIAL PARTS

Special Parts

WEB SITE -WWW.METFLO.COM

Please visit our Web SiteWWW.METFLO.COM toaccess our entire productoffering located in “METFLO®

Components”. Click on“METFLO® Components”,find the solution to yourneeds, grab a shopping cartand fill it up. Online shoppingassures customers they willreceive the most accurate,up-to-date pricing.

Can’t find what you’relooking for? Our web siteallows you to request a quotefor custom tailored parts ande-mail your CAD drawings toH-P’s talented team ofengineers who will helpdevelop your special parts.

Click on “Contact Us” to linkto the sales representativefor your home state orcountry. Meet our TubularProducts team of SalesRepresentatives and Opera-tions Personnel in “OurPeople”. Take a tour and seewhat’s under our roof!

VIBRATIONDAMPNERS

NO LOSS STACKHEADS

ROUTER HOODS

RADIAL ARM HOODS

BELL MOUTHS

SUCTION HOODS

DIVERTER VALVES

Custom made to your specifications by certified welders.Call for pricing on these parts and MANY MORE.



Rolled Lip Duct

Rolled Lip Duct• Available in sizes 3” through 22” Diameter

• 3” – 19” IS AVAILABLE IN ONE GAUGE HEAVIERTHAN LISTED HERE

Dia. Length Gauge Part No.

3"* 60" 26 RD-26WT3004"* 60" 24 RD-24WT4005"* 60" 24 RD-24WT5006"* 60" 24 RD-24WT6007" 60" 22 RD-22WT7008" 60" 22 RD-22WT8009" 60" 22 RD-22WT90010" 60" 22 RD-22WT100011" 60" 22 RD-22WT110012" 60" 22 RD-22WT120013" 60" 20 RD-20WT130014" 60" 20 RD-20WT140015" 60" 20 RD-20WT150016" 60" 20 RD-20WT160017" 60" 20 RD-20WT170018" 60" 20 RD-20WT180019" 60" 20 RD-20WT190020" 60" 20 RD-20WT200022" 60" 20 RD-20WT2200* 3”– 6” IS 22 GAUGE IN STAINLESS STEEL• 3” DUCT CONSISTS OF A 3” COLLAR APPLIED TO A 3”

PIECE OF ROLLED DUCT, AS OPPOSED TO THESTANDARD DUCT WHERE THE ROLLED LIP IS FORMEDON THE END OF THE DUCT ITSELF. THE 3” SLEEVESLIDES OVER THE DUCT AS IN THE OTHER SIZES.

• OUR STANDARD STOCK IS 5 FOOT LENGTHS

Additional O-Rings• An O-Ring is included with each sleeve order.

Additional O-Rings must be ordered if needed foradjustment in fittings.

Dia. Temperature Part No.

3" Regular D-300R3" High Temperature D-300HT4" Regular D-400R4" High Temperature D-400HT5" Regular D-500R5" High Temperature D-500HT6" Regular D-600R6" High Temperature D-600HT7" Regular D-700R7" High Temperature D-700HT8" Regular D-800R8" High Temperature D-800HT9" Regular D-900R9" High Temperature D-900HT10" Regular D-1000R10" High Temperature D-1000HT11" Regular D-1100R11" High Temperature D-1100HT12" Regular D-1200R12" High Temperature D-1200HT13" Regular D-1300R13" High Temperature D-1300HT14" Regular D-1400R14" High Temperature D-1400HT15" Regular D-1500R15" High Temperature D-1500HT16" Regular D-1600R16" High Temperature D-1600HT17" Regular D-1700R17" High Temperature D-1700HT18" Regular D-1800R18" High Temperature D-1800HT19" Regular D-1900R19" High Temperature D-1900HT20" Regular D-2000R20" High Temperature D-2000HT22" Regular D-2200R22" High Temperature D-2200HT

Lifetime Clamp• Available in sizes 3” through 22” Diameter• Made of durable stainless steel

Dia. Part No.

3" D-CL3004" D-CL4005" D-CL5006" D-CL6007" D-CL7008" D-CL8009" D-CL90010" D-CL100011" D-CL110012" D-CL120013" D-CL130014" D-CL140015" D-CL150016" D-CL160017" D-CL170018" D-CL180019" D-CL190020" D-CL200022" D-CL2200

• BUNA N IS OIL RESISTANT UP TO 250° FARENHEIT

Rolled Lip Duct

O-Ring

Lifetime Clamp

Our Clamp has a

Lifetime GuaranteeThis long lasting, stainless steel

clamp is fitted with an O-ring sealing

gasket that is reusable. The locking

mechanism comes with a lifetime

guarantee. If it ever breaks, tears, or

becomes unusable, return it for a free

replacement, no questions asked.

• OTHER MATERIALS ARE AVAILABLE.





3"* 30" 26 RD-30SLEEVE34"* 30" 24 RD-30SLEEVE45"* 30" 24 RD-30SLEEVE56"* 30" 24 RD-30SLEEVE67" 30" 22 RD-30SLEEVE78" 30" 22 RD-30SLEEVE89" 30" 22 RD-30SLEEVE910" 30" 22 RD-30SLEEVE1011" 30" 22 RD-30SLEEVE1112" 30" 22 RD-30SLEEVE1213" 30" 20 RD-30SLEEVE1314" 30" 20 RD-30SLEEVE1415" 30" 20 RD-30SLEEVE1516" 30" 20 RD-30SLEEVE1617" 30" 20 RD-30SLEEVE1718" 30" 20 RD-30SLEEVE1819" 30" 20 RD-30SLEEVE1920" 30" 20 RD-30SLEEVE2022" 30" 20 RD-30SLEEVE22

Rolled Lip Adjustable Sleeves

11” Adjustable Sleeve• An O-Ring is included with each sleeve order.


30”- 56” AdjustableSleeve Assembly• An O-Ring is included with each sleeve order.


• Sleeve assembly includes sleeve, o-ring, clamp andsection of rolled duct, cut and trimmed to form the pre-fitted assembly.

• The assembly has an adjustment of 26”, and a totallength of 56”, no additional cutting required.


3"* 11" 26 RD-11SLEEVE34"* 11" 24 RD-11SLEEVE45"* 11" 24 RD-11SLEEVE56"* 11" 24 RD-11SLEEVE67" 11" 22 RD-11SLEEVE78" 11" 22 RD-11SLEEVE89" 11" 22 RD-11SLEEVE910" 11" 22 RD-11SLEEVE1011" 11" 22 RD-11SLEEVE1112" 11" 22 RD-11SLEEVE1213" 11" 20 RD-11SLEEVE1314" 11" 20 RD-11SLEEVE1415" 11" 20 RD-11SLEEVE1516" 11" 20 RD-11SLEEVE1617" 11" 20 RD-11SLEEVE1718" 11" 20 RD-11SLEEVE1819" 11" 20 RD-11SLEEVE1920" 11" 20 RD-11SLEEVE2022" 11" 20 RD-11SLEEVE22


3"* 56" 26 RD-30ADSLV34"* 56" 24 RD-30ADSLV45"* 56" 24 RD-30ADSLV56"* 56" 24 RD-30ADSLV67" 56" 22 RD-30ADSLV78" 56" 22 RD-30ADSLV89" 56" 22 RD-30ADSLV910" 56" 22 RD-30ADSLV1011" 56" 22 RD-30ADSLV1112" 56" 22 RD-30ADSLV1213" 56" 20 RD-30ADLSV1314" 56" 20 RD-30ADSLV1415" 56" 20 RD-30ADSLV1516" 56" 20 RD-30ADSLV1617" 56" 20 RD-30ADSLV1718" 56" 20 RD-30ADSLV1819" 56" 20 RD-30ADSLV1920" 56" 20 RD-30ADSLV2022" 56" 20 RD-30ADSLV22

30” Adjustable Sleeve• An O-Ring is included with each sleeve order.


* 3”– 6” IS 22 GAUGE IN STAINLESS STEEL

11” Sleeve”



30” - 56” Adjustable SleeveAssembly

• For cases when longersleeves are needed

METFLO® DUCT COMPONENTS ALLOWFOR ENDLESS ADJUSTMENTS TO FITANY LENGTH REQUIREMENT FORYOUR SYSTEM. THE ADJUSTABLESLEEVE IS RECOMMENDED FORLONGER LENGTHS, AND THEADJUSTABLE COLLAR ON ALLFITTINGS IS FOR SHORT, IMPORTANTAND OFTEN TROUBLESOMEADJUSTMENTS BETWEEN PARTS.

STEP 1:FOR A SLEEVE: CUT A STANDARD

LENGTH OF DUCT TO A LENGTH THATIS SLIGHTLY SHORTER THAN WHATYOU NEED TO MAKE THE CONNEC-TIONS.

FOR A FITTING: CUT A STANDARDLENGTH OF DUCT TO A LENGTH THATIS SLIGHTLY LONGER THAN WHAT ISNEEDED.

STEP 2:SLIDE THE CUT PIECE OF DUCT INTO

FITTING AND USE AN O-RING ANDCLAMP TO SECURE THE FIT.

INSTALLING ADJUSTABLECOMPONENTS

FOR FAST FIELD FITTING

When using the adjustable featureof the elbows and/or fittings, anadditional O-Ring must be ordered.



• OTHER RADII ARE AVAILABLE

Rolled Lip Elbows

Stitched Welded Elbow• Our “General Purpose” elbow for applications where

thin gauge material is optimal• Available in 3” through 12” Diameter• Available in 45 and 90 Degree

Standard Radius (1.5) times OD

Tube Elbow

Dia. Degree CLR Gauge Part No.

3" 90 4-1/2 16 RD-SR3424" 90 6 16 RD-SR4425" 90 7-1/2 14 RD-SR5426" 90 9 14 RD-SR6428" 90 12 14 RD-SR842


3" 90 7-1/2 16 RD-EL3024" 90 10 16 RD-EL4025" 90 12-1/2 14 RD-EL5026" 90 15 14 RD-EL6028" 90 20 14 RD-EL802


Long Radius (2.5) times OD

Segmented Elbow• Our gored, multi-purpose, smooth walled elbow• Available in Standard and Long Radius• Available in 30, 45, 60, and 90 Degree• Available in 7” through 22” Diameter• Available in zinc or stainless• All seams are welded or brazed


7" 90 10-1/2 20 RD-SG7427" 60 10-1/2 20 RD-SG7467" 45 10-1/2 20 RD-SG7417" 30 10-1/2 20 RD-SG7438" 90 12 20 RD-SG8428" 60 12 20 RD-SG8468" 45 12 20 RD-SG8418" 30 12 20 RD-SG8439" 90 13-1/2 20 RD-SG9429" 60 13-1/2 20 RD-SG9469" 45 13-1/2 20 RD-SG9419" 30 13-1/2 20 RD-SG94310" 90 15 20 RD-SG104210" 60 15 20 RD-SG104610" 45 15 20 RD-SG104110" 30 15 20 RD-SG104311" 90 16-1/2 18 RD-SG114211" 60 16-1/2 18 RD-SG114611" 45 16-1/2 18 RD-SG114111" 30 16-1/2 18 RD-SG114312" 90 18 18 RD-SG124212" 60 18 18 RD-SG124612" 45 18 18 RD-SG124112" 30 18 18 RD-SG124313" 90 19-1/2 18 RD-SG134213" 60 19-1/2 18 RD-SG134613" 45 19-1/2 18 RD-SG134113" 30 19-1/2 18 RD-SG134314" 90 21 18 RD-SG144214" 60 21 18 RD-SG144614" 45 21 18 RD-SG144114" 30 21 18 RD-SG144315" 90 22-1/2 18 RD-SG154215" 60 22-1/2 18 RD-SG154615" 45 22-1/2 18 RD-SG154115" 30 22-1/2 18 RD-SG154316" 90 24 18 RD-SG164216" 60 24 18 RD-SG164616" 45 24 18 RD-SG164116" 30 24 18 RD-SG164317" 90 25-1/2 18 RD-SG174217" 60 25-1/2 18 RD-SG174617" 45 25-1/2 18 RD-SG174117" 30 25-1/2 18 RD-SG1743

Standard Radius (1.5) times OD• OTHER RADII ARE AVAILABLE

3" 45 4-1/2 22 RD-STSR3414" 45 6 22 RD-STSR4415" 45 7-1/2 22 RD-STSR5416" 45 9 22 RD-STSR6417" 45 10-1/2 22 RD-STSR7418" 45 12 22 RD-STSR8419" 45 13-1/2 22 RD-STSR94110" 45 15 22 RD-STSR104112" 45 18 22 RD-STSR1241

3" 45 4-1/2 16 RD-SR3414" 45 6 16 RD-SR4415" 45 7-1/2 14 RD-SR5416" 45 9 14 RD-SR6418" 45 12 14 RD-SR841

3" 45 7-1/2 16 RD-EL3014" 45 10 16 RD-EL4015" 45 12-1/2 14 RD-EL5016" 45 15 14 RD-EL6018" 45 20 14 RD-EL801

• Our “Heavy Duty” elbow, for highly abrasive applications• Available in 3” through 8” Diameter• Available in 45 and 90 Degree

Stitched Welded Elbow

Tube Elbow

Dia. DOB CLR Gauge Part No.

3" 90 4-1/2 22 RD-STSR3424" 90 6 22 RD-STSR4425" 90 7-1/2 22 RD-STSR5426" 90 9 22 RD-STSR6427" 90 10-1/2 22 RD-STSR7428" 90 12 22 RD-STSR8429" 90 13-1/2 22 RD-STSR94210" 90 15 22 RD-STSR104212" 90 18 22 RD-STSR1242

• GALVANIZED ONLY

• ELBOWS ARE AIRTIGHT

• Our “Heavy Duty” elbow, forhighly abrasive applications

• Available in 3” through 8”Diameter

• Available in 45 and 90 Degree

• Our “General Purpose” elbowfor applications where thingauge material is optimal


• Available in 45 and 90 Degree




Rolled Lip Elbows

Standard Radius (1.5) cont.

Long Radius (2.5) times OD• OTHER RADII ARE AVAILABLE


18" 90 27 18 RD-SG184218" 60 27 18 RD-SG184618" 45 27 18 RD-SG184118" 30 27 18 RD-SG184319" 90 28-1/2 18 RD-SG194219" 60 28-1/2 18 RD-SG194619" 45 28-1/2 18 RD-SG194119" 30 28-1/2 18 RD-SG194320" 90 30 18 RD-SG204220" 60 30 18 RD-SG204620" 45 30 18 RD-SG204120" 30 30 18 RD-SG204322" 90 33 18 RD-SG224222" 60 33 18 RD-SG224622" 45 33 18 RD-SG224122" 30 33 18 RD-SG2243


7" 90 17-1/2 20 RD-SG7027" 60 17-1/2 20 RD-SG7067" 45 17-1/2 20 RD-SG7017" 30 17-1/2 20 RD-SG7038" 90 20 20 RD-SG8028" 60 20 20 RD-SG8068" 45 20 20 RD-SG8018" 30 20 20 RD-SG8039" 90 22-1/2 20 RD-SG9029" 60 22-1/2 20 RD-SG9069" 45 22-1/2 20 RD-SG9019" 30 22-1/2 20 RD-SG90310" 90 25 20 RD-SG100210" 60 25 20 RD-SG100610" 45 25 20 RD-SG100110" 30 25 20 RD-SG100311" 90 27-1/2 18 RD-SG110211" 60 27-1/2 18 RD-SG110611" 45 27-1/2 18 RD-SG110111" 30 27-1/2 18 RD-SG110312" 90 30 18 RD-SG120212" 60 30 18 RD-SG120612" 45 30 18 RD-SG120112" 30 30 18 RD-SG120313" 90 32-1/2 18 RD-SG130213" 60 32-1/2 18 RD-SG130613" 45 32-1/2 18 RD-SG130113" 30 32-1/2 18 RD-SG1303

Long Radius (2.5) cont.


14" 90 35 18 RD-SG140214" 60 35 18 RD-SG140614" 45 35 18 RD-SG140114" 30 35 18 RD-SG140315" 90 37-1/2 18 RD-SG150215" 60 37-1/2 18 RD-SG150615" 45 37-1/2 18 RD-SG150115" 30 37-1/2 18 RD-SG150316" 90 40 18 RD-SG160216" 60 40 18 RD-SG160616" 45 40 18 RD-SG160116" 30 40 18 RD-SG160317" 90 42-1/2 18 RD-SG170217" 60 42-1/2 18 RD-SG170617" 45 42-1/2 18 RD-SG170117" 30 42-1/2 18 RD-SG170318" 90 45 18 RD-SG180218" 60 45 18 RD-SG180618" 45 45 18 RD-SG180118" 30 45 18 RD-SG180319" 90 47-1/2 18 RD-SG190219" 60 47-1/2 18 RD-SG190619" 45 47-1/2 18 RD-SG190119" 30 47-1/2 18 RD-SG190320" 90 50 18 RD-SG200220" 60 50 18 RD-SG200620" 45 50 18 RD-SG200120" 30 50 18 RD-SG200322" 90 55 18 RD-SG220222" 60 55 18 RD-SG220622" 45 55 18 RD-SG220122" 30 55 18 RD-SG2203

Segmented Elbow

• Our gored, multi-purpose,smooth walled elbow

• Available in Standard and LongRadius

• Available in 30, 45, 60, and 90Degree


• Available in zinc or stainless

• All seams are welded or brazed












Rolled Lip Elbows

Pleated/Non-Welded Elbows• Our general purpose, low cost, unidirectional elbow. For applications where “Airtight” is not a requirement.• Available in 3” through 15” Diameter• Available in Standard and Long Radius• Available in 30, 45, 60, and 90 Degree• Available in Galvanized only

Dia. Degree CLR Gauge Part no.

3" 90 4.5 22 RD-PL3423" 60 4.5 22 RD-PL3463" 45 4.5 22 RD-PL3413" 30 4.5 22 RD-PL3434" 90 6 22 RD-PL4424" 60 6 22 RD-PL4464" 45 6 22 RD-PL4414" 30 6 22 RD-PL4435" 90 7-1/2 22 RD-PL5425" 60 7-1/2 22 RD-PL5465" 45 7-1/2 22 RD-PL5415" 30 7-1/2 22 RD-PL5436" 90 9 22 RD-PL6426" 60 9 22 RD-PL6466" 45 9 22 RD-PL6416" 30 9 22 RD-PL6437" 90 10-1/2 22 RD-PL7427" 60 10-1/2 22 RD-PL7467" 45 10-1/2 22 RD-PL7417" 30 10-1/2 22 RD-PL7438" 90 12 22 RD-PL8428" 60 12 22 RD-PL8468" 45 12 22 RD-PL8418" 30 12 22 RD-PL8439" 90 13-1/2 20 RD-PL9429" 60 13-1/2 20 RD-PL9469" 45 13-1/2 20 RD-PL9419" 30 13-1/2 20 RD-PL94310" 90 15 20 RD-PL104210" 60 15 20 RD-PL104610" 45 15 20 RD-PL104110" 30 15 20 RD-PL104311" 90 16-1/2 20 RD-PL114211" 60 16-1/2 20 RD-PL114611" 45 16-1/2 20 RD-PL114111" 30 16-1/2 20 RD-PL114312" 90 18 20 RD-PL124212" 60 18 20 RD-PL124612" 45 18 20 RD-PL124112" 30 18 20 RD-PL124313" 90 19-1/2 20 RD-PL134213" 60 19-1/2 20 RD-PL134613" 45 19-1/2 20 RD-PL134113" 30 19-1/2 20 RD-PL1343





14" 90 21 20 RD-PL144214" 60 21 20 RD-PL144614" 45 21 20 RD-PL144114" 30 21 20 RD-PL144315" 90 22-1/2 20 RD-PL154215" 60 22-1/2 20 RD-PL154615" 45 22-1/2 20 RD-PL154115" 30 22-1/2 20 RD-PL1543


3" 90 7-1/2 22 RD-PL3023" 60 7-1/2 22 RD-PL3063" 45 7-1/2 22 RD-PL3013" 30 7-1/2 22 RD-PL3034" 90 10 22 RD-PL4024" 60 10 22 RD-PL4064" 45 10 22 RD-PL4014" 30 10 22 RD-PL4035" 90 12-1/2 22 RD-PL5025" 60 12-1/2 22 RD-PL5065" 45 12-1/2 22 RD-PL5015" 30 12-1/2 22 RD-PL5036" 90 15 22 RD-PL6026" 60 15 22 RD-PL6066" 45 15 22 RD-PL6016" 30 15 22 RD-PL6037" 90 17-1/2 22 RD-PL7027" 60 17-1/2 22 RD-PL7067" 45 17-1/2 22 RD-PL7017" 30 17-1/2 22 RD-PL7038" 90 20 22 RD-PL8028" 60 20 22 RD-PL8068" 45 20 22 RD-PL8018" 30 20 22 RD-PL8039" 90 22-1/2 20 RD-PL9029" 60 22-1/2 20 RD-PL9069" 45 22-1/2 20 RD-PL9019" 30 22-1/2 20 RD-PL90310" 90 25 20 RD-PL100210" 60 25 20 RD-PL100610" 45 25 20 RD-PL100110" 30 25 20 RD-PL1003

• NOT AVAILABLE IN STAINLESS STEEL• NOT AN AIRTIGHT ELBOW • NOT AVAILABLE IN STAINLESS STEEL

• NOT AN AIRTIGHT ELBOW

Pleated/Non-Welded Elbow

• Our general purpose, low cost,unidirectional elbow. Forapplications where “Airtight” isnot a requirement.




• Available in Galvanized only




Rolled Lip Elbows

Pleated/Welded Elbows• Our unidirectional, airtight, elbow of pleated

construction• Available in 3” through 15” Diameter• Available in Standard and Long Radius• Available in 30, 45, 60, and 90 Degree• Available in Galvanized only



11" 90 27-1/2 20 RD-PL110211" 60 27-1/2 20 RD-PL110611" 45 27-1/2 20 RD-PL110111" 30 27-1/2 20 RD-PL110312" 90 30 20 RD-PL120212" 60 30 20 RD-PL120612" 45 30 20 RD-PL120112" 30 30 20 RD-PL120313" 90 32-1/2 20 RD-PL130213" 60 32-1/2 20 RD-PL130613" 45 32-1/2 20 RD-PL130113" 30 32-1/2 20 RD-PL130314" 90 35 20 RD-PL140214" 60 35 20 RD-PL140614" 45 35 20 RD-PL140114" 30 35 20 RD-PL140315" 90 37-1/2 20 RD-PL150215" 60 37-1/2 20 RD-PL150615" 45 37-1/2 20 RD-PL150115" 30 37-1/2 20 RD-PL1503

• NOT AVAILABLE IN STAINLESS STEEL• NOT AN AIRTIGHT ELBOW



3" 90 4-1/2 22 RD-PW3423" 60 4-1/2 22 RD-PW3463" 45 4-1/2 22 RD-PW3413" 30 4-1/2 22 RD-PW3434" 90 6 22 RD-PW4424" 60 6 22 RD-PW4464" 45 6 22 RD-PW4414" 30 6 22 RD-PW4435" 90 7-1/2 22 RD-PW5425" 60 7-1/2 22 RD-PW5465" 45 7-1/2 22 RD-PW5415" 30 7-1/2 22 RD-PW5436" 90 9 22 RD-PW6426" 60 9 22 RD-PW6466" 45 9 22 RD-PW6416" 30 9 22 RD-PW6437" 90 10-1/2 22 RD-PW7427" 60 10-1/2 22 RD-PW7467" 45 10-1/2 22 RD-PW7417" 30 10-1/2 22 RD-PW7438" 90 12 22 RD-PW8428" 60 12 22 RD-PW8468" 45 12 22 RD-PW8418" 30 12 22 RD-PW8439" 90 13-1/2 20 RD-PW9429" 60 13-1/2 20 RD-PW9469" 45 13-1/2 20 RD-PW9419" 30 13-1/2 20 RD-PW94310" 90 15 20 RD-PW104210" 60 15 20 RD-PW104610" 45 15 20 RD-PW104110" 30 15 20 RD-PW104311" 90 16-1/2 20 RD-PW114211" 60 16-1/2 20 RD-PW114611" 45 16-1/2 20 RD-PW114111" 30 16-1/2 20 RD-PW114312" 90 18 20 RD-PW124212" 60 18 20 RD-PW124612" 45 18 20 RD-PW124112" 30 18 20 RD-PW1243

• NOT AVAILABLE IN STAINLESS STEEL• THIS ELBOW IS AIRTIGHT

Pleated/Welded Elbow

Pleated/Non-WeldedElbows cont.










• Our unidirectional, airtight,elbow of pleated construction







Rolled Lip Elbows


Pleated/Welded Elbows cont.• Our unidirectional, airtight, elbow of pleated construction• Available in 3” through 15” Diameter• Available in Standard and Long Radius• Available in 30, 45, 60, and 90 Degree• Available in Galvanized only


13" 90 19-1/2 20 RD-PW134213" 60 19-1/2 20 RD-PW134613" 45 19-1/2 20 RD-PW134113" 30 19-1/2 20 RD-PW134314" 90 21 20 RD-PW144214" 60 21 20 RD-PW144614" 45 21 20 RD-PW144114" 30 21 20 RD-PW144315" 90 22-1/2 20 RD-PW154215" 60 22-1/2 20 RD-PW154615" 45 22-1/2 20 RD-PW154115" 30 22-1/2 20 RD-PW1543


3" 90 7-1/2 22 RD-PW3023" 60 7-1/2 22 RD-PW3063" 45 7-1/2 22 RD-PW3013" 30 7-1/2 22 RD-PW3034" 90 10 22 RD-PW4024" 60 10 22 RD-PW4064" 45 10 22 RD-PW4014" 30 10 22 RD-PW4035" 90 12-1/2 22 RD-PW5025" 60 12-1/2 22 RD-PW5065" 45 12-1/2 22 RD-PW5015" 30 12-1/2 22 RD-PW5036" 90 15 22 RD-PW6026" 60 15 22 RD-PW6066" 45 15 22 RD-PW6016" 30 15 22 RD-PW6037" 90 17-1/2 22 RD-PW7027" 60 17-1/2 22 RD-PW7067" 45 17-1/2 22 RD-PW7017" 30 17-1/2 22 RD-PW7038" 90 20 22 RD-PW8028" 60 20 22 RD-PW8068" 45 20 22 RD-PW8018" 30 20 22 RD-PW803




9" 90 22-1/2 20 RD-PW9029" 60 22-1/2 20 RD-PW9069" 45 22-1/2 20 RD-PW9019" 30 22-1/2 20 RD-PW90310" 90 25 20 RD-PW100210" 60 25 20 RD-PW100610" 45 25 20 RD-PW100110" 30 25 20 RD-PW100311" 90 27-1/2 20 RD-PW110211" 60 27-1/2 20 RD-PW110611" 45 27-1/2 20 RD-PW110111" 30 27-1/2 20 RD-PW110312" 90 30 20 RD-PW120212" 60 30 20 RD-PW120612" 45 30 20 RD-PW120112" 30 30 20 RD-PW120313" 90 32-1/2 20 RD-PW130213" 60 32-1/2 20 RD-PW130613" 45 32-1/2 20 RD-PW130113" 30 32-1/2 20 RD-PW130314" 90 35 20 RD-PW140214" 60 35 20 RD-PW140614" 45 35 20 RD-PW140114" 30 35 20 RD-PW140315" 90 37-1/2 20 RD-PW150215" 60 37-1/2 20 RD-PW150615" 45 37-1/2 20 RD-PW150115" 30 37-1/2 20 RD-PW1503

Pleated/Welded Elbow












Rolled Lip Fittings

YL Branches(Tee on Taper)• Available in 3” through 22” Diameter• Available in 30 and 45 Degree

Dia. Degree Gauge Part No.

3" 30 18 RD-18YL30033" 45 18 RD-18YL30014" 30 18 RD-18YL40034" 45 18 RD-18YL40015" 30 18 RD-18YL50035" 45 18 RD-18YL50016" 30 18 RD-18YL60036" 45 18 RD-18YL60017" 30 18 RD-18YL70037" 45 18 RD-18YL70018" 30 18 RD-18YL80038" 45 18 RD-18YL80019" 30 18 RD-18YL90039" 45 18 RD-18YL900110" 30 18 RD-18YL1000310" 45 18 RD-18YL1000111" 30 18 RD-18YL1100311" 45 18 RD-18YL1100112" 30 18 RD-18YL1200312" 45 18 RD-18YL1200113" 30 18 RD-18YL1300313" 45 18 RD-18YL1300114" 30 18 RD-18YL1400314" 45 18 RD-18YL1400115" 30 18 RD-18YL1500315" 45 18 RD-18YL1500116" 30 18 RD-18YL1600316" 45 18 RD-18YL1600117" 30 18 RD-18YL1700317" 45 18 RD-18YL1700118" 30 18 RD-18YL1800318" 45 18 RD-18YL1800119" 30 18 RD-18YL1900319" 45 18 RD-18YL1900120" 30 18 RD-18YL2000320" 45 18 RD-18YL2000122" 30 18 RD-18YL2200322" 45 18 RD-18YL22001

90º Branches(Tee on Taper)• Available in 3” through 22” Diameter


3" 90 18 RD-18TEE3004" 90 18 RD-18TEE4005" 90 18 RD-18TEE5006" 90 18 RD-18TEE6007" 90 18 RD-18TEE7008" 90 18 RD-18TEE8009" 90 18 RD-18TEE90010" 90 18 RD-18TEE100011" 90 18 RD-18TEE110012" 90 18 RD-18TEE120013" 90 18 RD-18TEE130014" 90 18 RD-18TEE140015" 90 18 RD-18TEE150016" 90 18 RD-18TEE160017" 90 18 RD-18TEE170018" 90 18 RD-18TEE180019" 90 18 RD-18TEE190020" 90 18 RD-18TEE200022" 90 18 RD-18TEE2200

90° Branch

YL Branch

• WHEN USING THE ADJUSTABLE FEATUREOF THE FITTING, AN ADDITIONAL O-RINGMUST BE ORDERED.







16151413121110987654321







Rolled Lip Fittings

Double Y Branches• Used to join 2 branches to the main angle of 30 or 45

Degrees.• Available in 4” through 22” Diameter


4" 30 18 RD-18DY40034" 45 18 RD-18DY40015" 30 18 RD-18DY50035" 45 18 RD-18DY50016" 30 18 RD-18DY60036" 45 18 RD-18DY60017" 30 18 RD-18DY70037" 45 18 RD-18DY70018" 30 18 RD-18DY80038" 45 18 RD-18DY80019" 30 18 RD-18DY90039" 45 18 RD-18DY900110" 30 18 RD-18DY1000310" 45 18 RD-18DY1000111" 30 18 RD-18DY1100311" 45 18 RD-18DY1100112" 30 18 RD-18DY1200312" 45 18 RD-18DY1200113" 30 18 RD-18DY1300313" 45 18 RD-18DY1300114" 30 18 RD-18DY1400314" 45 18 RD-18DY1400115" 30 18 RD-18DY1500315" 45 18 RD-18DY1500116" 30 18 RD-18DY1600316" 45 18 RD-18DY1600117" 30 18 RD-18DY1700317" 45 18 RD-18DY1700118" 30 18 RD-18DY1800318" 45 18 RD-18DY1800119" 30 18 RD-18DY1900319" 45 18 RD-18DY1900120" 30 18 RD-18DY2000320" 45 18 RD-18DY2000122" 30 18 RD-18DY2200322" 45 18 RD-18DY22001

Double YL Branches(Tee on Taper)• Available in 3” through 22” Diameter• Available in 30 and 45 Degree


3" 30 18 RD-18DYL30033" 45 18 RD-18DYL30014" 30 18 RD-18DYL40034" 45 18 RD-18DYL40015" 30 18 RD-18DYL50035" 45 18 RD-18DYL50016" 30 18 RD-18DYL60036" 45 18 RD-18DYL60017" 30 18 RD-18DYL70037" 45 18 RD-18DYL70018" 30 18 RD-18DYL80038" 45 18 RD-18DYL80019" 30 18 RD-18DYL90039" 45 18 RD-18DYL900110" 30 18 RD-18DYL1000310" 45 18 RD-18DYL1000111" 30 18 RD-18DYL1100311" 45 18 RD-18DYL1100112" 30 18 RD-18DYL1200312" 45 18 RD-18DYL1200113" 30 18 RD-18DYL1300313" 45 18 RD-18DYL1300114" 30 18 RD-18DYL1400314" 45 18 RD-18DYL1400115" 30 18 RD-18DYL1500315" 45 18 RD-18DYL1500116" 30 18 RD-18DYL1600316" 45 18 RD-18DYL1600117" 30 18 RD-18DYL1700317" 45 18 RD-18DYL1700118" 30 18 RD-18DYL1800318" 45 18 RD-18DYL1800119" 30 18 RD-18DYL1900319" 45 18 RD-18DYL1900120" 30 18 RD-18DYL2000320" 45 18 RD-18DYL2000122" 30 18 RD-18DYL2200322" 45 18 RD-18DYL22001

Double YL Branch

Double Y Branch















Rolled Lip Fittings

Rolled Lip Adapters• Available in Straight and Flanged Ends• Available in 3” through 22” Diameter• When using adjustable feature of the fitting, an

additional O-Ring must be ordered


3"* 8" 26 RD-AD3004"* 8" 24 RD-AD4005"* 8" 24 RD-AD5006"* 8" 24 RD-AD6007" 8" 22 RD-AD7008" 8" 22 RD-AD8009" 8" 22 RD-AD90010" 8" 22 RD-AD100011" 8" 22 RD-AD110012" 8" 22 RD-AD120013" 8" 20 RD-AD130014" 8" 20 RD-AD140015" 8" 20 RD-AD150016" 8" 20 RD-AD160017" 8" 20 RD-AD170018" 8" 20 RD-AD180019" 8" 20 RD-AD190020" 8" 20 RD-AD200022" 8" 20 RD-AD2200

Hose Adapters• Available in 3” through 22” Diameter


3"* 5" 26 RD-HA3004"* 5" 24 RD-HA4005"* 5" 24 RD-HA5006"* 5" 24 RD-HA6007" 5" 22 RD-HA7008" 5" 22 RD-HA8009" 5" 22 RD-HA90010" 5" 22 RD-HA100011" 5" 22 RD-HA110012" 5" 22 RD-HA120013" 5" 20 RD-HA130014" 5" 20 RD-HA140015" 5" 20 RD-HA150016" 5" 20 RD-HA160017" 5" 20 RD-HA170018" 5" 20 RD-HA180019" 5" 20 RD-HA190020" 5" 20 RD-HA200022" 5" 20 RD-HA2200

Rolled Lip Reducers• Available in all diameters• Reducers are priced by the large end• Length is determined by the dimension

of the reducer

Dia. Gauge Part No.

3" 20 RD-RC3004" 20 RD-RC4005" 20 RD-RC5006" 20 RD-RC6007" 20 RD-RC7008" 20 RD-RC8009" 20 RD-RC90010" 20 RD-RC100011" 20 RD-RC110012" 20 RD-RC120013" 20 RD-RC130014" 20 RD-RC140015" 20 RD-RC150016" 20 RD-RC160017" 20 RD-RC170018" 20 RD-RC180019" 20 RD-RC190020" 20 RD-RC200022" 20 RD-RC2200

Rolled Lip/Straight EndAdapter

Rolled Lip Reducer

Hose Adapter



3"* 8" 26 RD-FAD3004"* 8" 24 RD-FAD4005"* 8" 24 RD-FAD5006"* 8" 24 RD-FAD6007" 8" 22 RD-FAD7008" 8" 22 RD-FAD8009" 8" 22 RD-FAD90010" 8" 22 RD-FAD100011" 8" 22 RD-FAD110012" 8" 22 RD-FAD120013" 8" 20 RD-FAD130014" 8" 20 RD-FAD140015" 8" 20 RD-FAD150016" 8" 20 RD-FAD160017" 8" 20 RD-FAD170018" 8" 20 RD-FAD180019" 8" 20 RD-FAD190020" 8" 20 RD-FAD200022" 8" 20 RD-FAD2200* 3”– 6” IS 22 GAUGE IN STAINLESS STEEL

Rolled/Flanged End

Rolled/Straight End

Rolled Lip/Flanged EndAdapter





Rolled Lip Supplemental Components

Butterfly Valves• Available in 3” through 22” Diameter

Dia. Gauge Part No.

3"* 24 RD-BV3004"* 24 RD-BV4005"* 24 RD-BV5006"* 24 RD-BV6007" 22 RD-BV7008" 22 RD-BV8009" 22 RD-BV90010" 22 RD-BV100011" 22 RD-BV110012" 22 RD-BV120013" 20 RD-BV130014" 20 RD-BV140015" 20 RD-BV150016" 20 RD-BV160017" 20 RD-BV170018" 20 RD-BV180019" 20 RD-BV190020" 20 RD-BV200022" 20 RD-BV2200

End Caps• Available in 3” through 22” Diameter• Available with Closed End or Bird Screen

Closed End CapDia. Part No.

3" RD-CAP3004" RD-CAP4005" RD-CAP5006" RD-CAP6007" RD-CAP7008" RD-CAP8009" RD-CAP90010" RD-CAP100011" RD-CAP110012" RD-CAP120013" RD-CAP130014" RD-CAP140015" RD-CAP150016" RD-CAP160017" RD-CAP170018" RD-CAP180019" RD-CAP190020" RD-CAP200022" RD-CAP2200

Bird Screen CapDia. Part No.

3" RD-BCAP3004" RD-BCAP4005" RD-BCAP5006" RD-BCAP6007" RD-BCAP7008" RD-BCAP8009" RD-BCAP90010" RD-BCAP100011" RD-BCAP110012" RD-BCAP120013" RD-BCAP130014" RD-BCAP140015" RD-BCAP150016" RD-BCAP160017" RD-BCAP170018" RD-BCAP180019" RD-BCAP190020" RD-BCAP200022" RD-BCAP2200

Rectangular toRound Transitions• Available in 3” through 22” Diameter• Available with or without flanges

Dia. Gauge Part No.

3" 20 RD-RRT3004" 20 RD-RRT4005" 20 RD-RRT5006" 20 RD-RRT6007" 20 RD-RRT7008" 20 RD-RRT8009" 20 RD-RRT90010" 20 RD-RRT100011" 20 RD-RRT110012" 20 RD-RRT120013" 20 RD-RRT130014" 20 RD-RRT140015" 18 RD-RRT150016" 18 RD-RRT160017" 18 RD-RRT170018" 18 RD-RRT180019" 18 RD-RRT190020" 18 RD-RRT200022" 18 RD-RRT2200• 3/16” AND HEAVIER FABRICATIONS ARE

ALSO AVAILABLE

* 3”– 6” IS 22 GAUGE IN STAINLESS STEELRectangular to Round Transition

Closed End Cap

Bird Screen Cap

Butterfly Valve





Cut-Offs• Available in 3” through 22” Diameter• Available in Full and Half Sizes• Cut-offs are used to balance systems, or save air,

heat and power when machine is not in use.• Stainless Steel Cut-Offs are cast aluminum bodies,

with Stainless Steel blades and collars.• Larger sizes are available

Full Cut-Off

Half Cut-OffDia. Gauge Part No.

3" 24 RD-CF300-24" 24 RD-CF400-25" 24 RD-CF500-26" 24 RD-CF600-27" 22 RD-CF700-28" 22 RD-CF800-29" 22 RD-CF900-210" 22 RD-CF1000-211" 22 RD-CF1100-212" 22 RD-CF1200-214" 20 RD-CF1400-216" 20 RD-CF1600-218" 20 RD-CF1800-2


3"* 2-1/2" 24 RD-CF3004"* 2-1/2" 24 RD-CF4005"* 2-1/2" 24 RD-CF5006"* 2-1/2" 24 RD-CF6007" 2-1/2" 22 RD-CF7008" 2-1/2" 22 RD-CF8009" 2-1/2" 22 RD-CF90010" 2-1/2" 22 RD-CF100011" 2-1/2" 22 RD-CF110012" 2-1/2" 22 RD-CF120014" 2-1/2" 20 RD-CF140016" 2-1/2" 20 RD-CF160018" 2-1/2" 20 RD-CF180020" 2-1/2" 20 RD-CF200022" 2-1/2" 20 RD-CF2200

Blast Gates• Airtight Seal• May be used with positive or negative pressure• Not to be used if material is in the air stream• Available in 3” through 22” Diameter

Dia. Stub Gauge Part No.

3" 2-1/2" 14 RD-BG143004" 2-1/2" 14 RD-BG144005" 2-1/2" 14 RD-BG145006" 2-1/2" 14 RD-BG146007" 2-1/2" 14 RD-BG147008" 2-1/2" 14 RD-BG148009" 2-1/2" 14 RD-BG1490010" 2-1/2" 14 RD-BG14100011" 2-1/2" 14 RD-BG14110012" 2-1/2" 14 RD-BG14120013" 2-1/2" 14 RD-BG14130014" 2-1/2" 14 RD-BG14140015" 2-1/2" 14 RD-BG14150016" 2-1/2" 14 RD-BG14160017" 2-1/2" 14 RD-BG14170018" 2-1/2" 14 RD-BG14180019" 2-1/2" 14 RD-BG14190020" 2-1/2" 14 RD-BG14200022" 2-1/2" 14 RD-BG142200

Ball Joints• Provide flexibility in ducts serving moving cutter

heads or other moving equipment• Galvanized only

Dia. Gauge Part No.

3" 18 RD-JT3004" 18 RD-JT4005" 18 RD-JT5006" 18 RD-JT6007" 18 RD-JT7008" 18 RD-JT8009" 18 RD-JT90010" 18 RD-JT100011" 18 RD-JT110012" 18 RD-JT1200

• STUB LENGTH IS PER SIDE

Cut Off (full)

Cut Off (half)

Blast Gate

Ball Joint


• NOT AVAILABLE IN STAINLESS STEEL




In-Cuts• Available in 3” through 22” Diameter


3" 90 18 RD-90CUT3003" 45 18 RD-45CUT3003" 30 18 RD-30CUT3004" 90 18 RD-90CUT4004" 45 18 RD-45CUT4004" 30 18 RD-30CUT4005" 90 18 RD-90CUT5005" 45 18 RD-45CUT5005" 30 18 RD-30CUT5006" 90 18 RD-90CUT6006" 45 18 RD-45CUT6006" 30 18 RD-30CUT6007" 90 18 RD-90CUT7007" 45 18 RD-45CUT7007" 30 18 RD-30CUT7008" 90 18 RD-90CUT8008" 45 18 RD-45CUT8008" 30 18 RD-30CUT8009" 90 18 RD-90CUT9009" 45 18 RD-45CUT9009" 30 18 RD-30CUT90010" 90 18 RD-90CUT100010" 45 18 RD-45CUT100010" 30 18 RD-30CUT100011" 90 18 RD-90CUT110011" 45 18 RD-45CUT110011" 30 18 RD-30CUT110012" 90 18 RD-90CUT120012" 45 18 RD-45CUT120012" 30 18 RD-30CUT120013" 90 18 RD-90CUT130013" 45 18 RD-45CUT130013" 30 18 RD-30CUT130014" 90 18 RD-90CUT140014" 45 18 RD-45CUT140014" 30 18 RD-30CUT140015" 90 18 RD-90CUT150015" 45 18 RD-45CUT150015" 30 18 RD-30CUT150016" 90 18 RD-90CUT160016" 45 18 RD-45CUT160016" 30 18 RD-30CUT160017" 90 18 RD-90CUT170017" 45 18 RD-45CUT170017" 30 18 RD-30CUT1700


18" 90 18 RD-90CUT180018" 45 18 RD-45CUT180018" 30 18 RD-30CUT180019" 90 18 RD-90CUT190019" 45 18 RD-45CUT190019" 30 18 RD-30CUT190020" 90 18 RD-90CUT200020" 45 18 RD-45CUT200020" 30 18 RD-30CUT200022" 90 18 RD-90CUT220022" 45 18 RD-45CUT220022" 30 18 RD-30CUT220045° In Cut

90° In Cut

Floor Sweeps• Floor sweeps have tight fitting doors, and are

operated by foot.

Diameter Gauge Part No.

4" 18 RD-FSW4005" 18 RD-FSW5006" 18 RD-FSW6007" 18 RD-FSW7008" 18 RD-FSW800

Floor Sweep




Dia. Part No.

2" D-HS2002.5" D-HS2503" D-HS3004" D-HS4005" D-HS5006" D-HS6007" D-HS7008" D-HS80010" D-HS100012" D-HS120014" D-HS140016" D-HS160018" D-HS1800

Accessories

Length Part No.

15 ft. D-TH30015 ft. D-TH40015 ft. D-TH500

Quick Hangers• Each package contains 15 feet of cable, and

1 Gripple and Release Pin

Steel Hose• Available in 2” through 12” Diameter• Multiple Lengths of 5 Feet

Dia. Part No.

2" D-HS200M2.5" D-HS250M3" D-HS300M4" D-HS400M5" D-HS500M6" D-HS600M

• ADDITIONAL HANGING ACCESSORIESINCLUDE THREADED ROD, CEILING CLIPS,PIG TAIL ANCHOR BOLTS, AND CONDUIT

Saddles• Available in 4” through 22” Diameter

Dia. Gauge Part No.

4" 16 D-SD4005" 16 D-SD5006" 16 D-SD6007" 16 D-SD7008" 16 D-SD8009" 16 D-SD90010" 16 D-SD100011" 14 D-SD110012" 14 D-SD120013" 14 D-SD130014" 14 D-SD140015" 14 D-SD150016" 14 D-SD160017" 14 D-SD170018" 14 D-SD180019" 14 D-SD190020" 14 D-SD200022" 14 D-SD2200

Rubber Flex Hoses• Available in diameters from 2” through 24”, in multiple

lengths of 5 feet• Other types of hose available

Black HoseDia. Part No.

2" D-HS200B2.5" D-HS250B3" D-HS300B4" D-HS400B5" D-HS500B6" D-HS600B7" D-HS700B8" D-HS800B9" D-HS900B10" D-HS1000B12" D-HS1200B14" D-HS1400B16" D-HS1600B18" D-HS1800B20" D-HS2000B24" D-HS2400B

Clear Hose

Hose Clamps• Available in 2” through 12” Diameter

Dia. Part No.

2" D-HC2003" D-HC3004" D-HC4005" D-HC5006" D-HC6008" D-HC80010" D-HC100012" D-HC1200

Dia. Part No.

7" D-HS700M8" D-HS800M9" D-HS900M10" D-HS1000M12" D-HS1200M

Rigid Hose

Flex HoseDia. Part No.

6" D-HS600MF7" D-HS700MF8" D-HS800MF

Saddle

Steel Hose, Flex & Rigid

Rubber Flex Hose, Black

Rubber Flex Hose, Clear

Quick Hangers

Dia. Part No.

3" D-HS300MF4" D-HS400MF5" D-HS500MF

Load Specificationsfor Quick HangersPART DEG TO WORKING BREAKNO. VERTICAL LOADS(lbs) LOADS(lbs)

D-TH400 0° 495 3300D-TH400 30° 425 3300D-TH400 45° 346 3300

D-TH500 0° 715 4752D-TH500 30° 614 4752D-TH500 45° 500 4752

D-TH300 0° 176 1276D-TH300 30° 151 1276D-TH300 45° 123 1276



Flanged End Duct

Flanged Duct• Available in 3” through 48”• Standard Length is 5 feet

• ALSO AVAILABLE IN HEAVIER GAUGES ANDLARGER SIZES


3"* 60 26 FD-26WT3004"* 60 24 FD-24WT4005"* 60 24 FD-24WT5006"* 60 24 FD-24WT6007" 60 22 FD-22WT7008" 60 22 FD-22WT8009" 60 22 FD-22WT90010" 60 22 FD-22WT100011" 60 22 FD-22WT110012" 60 22 FD-22WT120013" 60 20 FD-20WT130014" 60 20 FD-20WT140015" 60 20 FD-20WT150016" 60 20 FD-20WT160017" 60 20 FD-20WT170018" 60 20 FD-20WT180019" 60 20 FD-20WT190020" 60 20 FD-20WT200022" 60 20 FD-20WT220024" 60 18 FD-18WT240026" 60 18 FD-18WT260028" 60 18 FD-18WT280030" 60 18 FD-18WT300032" 60 18 FD-18WT320034" 60 18 FD-18WT340036" 60 18 FD-18WT360038" 60 18 FD-18WT380040" 60 18 FD-18WT400042" 60 18 FD-18WT420044" 60 18 FD-18WT440046" 60 18 FD-18WT460048" 60 18 FD-18WT4800

Flanges• Available in 3” through 48”

Dia. Gauge Part No.

3"* 26 D-FL3004"* 24 D-FL4005"* 24 D-FL5006"* 24 D-FL6007" 22 D-FL7008" 22 D-FL8009" 22 D-FL90010" 22 D-FL100011" 22 D-FL110012" 22 D-FL120013" 20 D-FL130014" 20 D-FL140015" 20 D-FL150016" 20 D-FL160017" 20 D-FL170018" 20 D-FL180019" 20 D-FL190020" 20 D-FL200022" 20 D-FL220024" 18 D-FL240026" 18 D-FL260028" 18 D-FL280030" 18 D-FL300032" 18 D-FL320034" 18 D-FL340036" 18 D-FL360038" 18 D-FL380040" 18 D-FL400042" 18 D-FL420044" 18 D-FL440046" 18 D-FL460048" 18 D-FL4800


Flanged Duct

Flange





Flanged End Elbows





7" 90 10-1/2 20 FD-SG7427" 60 10-1/2 20 FD-SG7467" 45 10-1/2 20 FD-SG7417" 30 10-1/2 20 FD-SG7438" 90 12 20 FD-SG8428" 60 12 20 FD-SG8468" 45 12 20 FD-SG8418" 30 12 20 FD-SG8439" 90 13-1/2 20 FD-SG9429" 60 13-1/2 20 FD-SG9469" 45 13-1/2 20 FD-SG9419" 30 13-1/2 20 FD-SG94310" 90 15 20 FD-SG104210" 60 15 20 FD-SG104610" 45 15 20 FD-SG104110" 30 15 20 FD-SG104311" 90 16-1/2 18 FD-SG114211" 60 16-1/2 18 FD-SG114611" 45 16-1/2 18 FD-SG114111" 30 16-1/2 18 FD-SG114312" 90 18 18 FD-SG124212" 60 18 18 FD-SG124612" 45 18 18 FD-SG124112" 30 18 18 FD-SG124313" 90 19-1/2 18 FD-SG134213" 60 19-1/2 18 FD-SG134613" 45 19-1/2 18 FD-SG134113" 30 19-1/2 18 FD-SG134314" 90 21 18 FD-SG144214" 60 21 18 FD-SG144614" 45 21 18 FD-SG144114" 30 21 18 FD-SG144315" 90 22-1/2 18 FD-SG154215" 60 22-1/2 18 FD-SG154615" 45 22-1/2 18 FD-SG154115" 30 22-1/2 18 FD-SG154316" 90 24 18 FD-SG164216" 60 24 18 FD-SG164616" 45 24 18 FD-SG164116" 30 24 18 FD-SG164317" 90 25-1/2 18 FD-SG174217" 60 25-1/2 18 FD-SG174617" 45 25-1/2 18 FD-SG174117" 30 25-1/2 18 FD-SG174318" 90 27 18 FD-SG1842

18" 60 27 18 FD-SG184618" 45 27 18 FD-SG184118" 30 27 18 FD-SG184319" 90 28-1/2 18 FD-SG194219" 60 28-1/2 18 FD-SG194619" 45 28-1/2 18 FD-SG194119" 30 28-1/2 18 FD-SG194320" 90 30 18 FD-SG204220" 60 30 18 FD-SG204620" 45 30 18 FD-SG204120" 30 30 18 FD-SG204322" 90 33 18 FD-SG224222" 60 33 18 FD-SG224622" 45 33 18 FD-SG224122" 30 33 18 FD-SG224324" 90 36 18 FD-SG244224" 60 36 18 FD-SG244624" 45 36 18 FD-SG244124" 30 36 18 FD-SG244326" 90 39 18 FD-SG264226" 60 39 18 FD-SG264626" 45 39 18 FD-SG264126" 30 39 18 FD-SG264328" 90 42 18 FD-SG284228" 60 42 18 FD-SG284628" 45 42 18 FD-SG284128" 30 42 18 FD-SG284330" 90 45 18 FD-SG304230" 60 45 18 FD-SG304630" 45 45 18 FD-SG304130" 30 45 18 FD-SG304332" 90 48 18 FD-SG324232" 60 48 18 FD-SG324632" 45 48 18 FD-SG324132" 30 48 18 FD-SG324334" 90 51 18 FD-SG344234" 60 51 18 FD-SG344634" 45 51 18 FD-SG344134" 30 51 18 FD-SG344336" 90 54 18 FD-SG364236" 60 54 18 FD-SG364636" 45 54 18 FD-SG364136" 30 54 18 FD-SG364338" 90 57 18 FD-SG384238" 60 57 18 FD-SG384638" 45 57 18 FD-SG384138" 30 57 18 FD-SG384340" 90 60 18 FD-SG404240" 60 60 18 FD-SG404640" 45 60 18 FD-SG404140" 30 60 18 FD-SG4043

Segmented Elbow

Segmented Elbows• Our gored, multi-purpose, smooth walled elbow• Available in Standard and Long Radius• Available in 30, 45, 60, and 90 Degree• Available in 7” through 48” Diameter• Available in zinc or stainless• All seams are welded or brazed







• OTHER RADII AVAILABLE








7" 90 17-1/2 20 FD-SG7027" 60 17-1/2 20 FD-SG7067" 45 17-1/2 20 FD-SG7017" 30 17-1/2 20 FD-SG7038" 90 20 20 FD-SG8028" 60 20 20 FD-SG8068" 45 20 20 FD-SG8018" 30 20 20 FD-SG8039" 90 22-1/2 20 FD-SG9029" 60 22-1/2 20 FD-SG9069" 45 22-1/2 20 FD-SG9019" 30 22-1/2 20 FD-SG90310" 90 25 20 FD-SG100210" 60 25 20 FD-SG100610" 45 25 20 FD-SG100110" 30 25 20 FD-SG100311" 90 27-1/2 18 FD-SG110211" 60 27-1/2 18 FD-SG110611" 45 27-1/2 18 FD-SG110111" 30 27-1/2 18 FD-SG110312" 90 30 18 FD-SG120212" 60 30 18 FD-SG120612" 45 30 18 FD-SG120112" 30 30 18 FD-SG1203

13" 90 32-1/2 18 FD-SG130213" 60 32-1/2 18 FD-SG130613" 45 32-1/2 18 FD-SG130113" 30 32-1/2 18 FD-SG130314" 90 35 18 FD-SG140214" 60 35 18 FD-SG140614" 45 35 18 FD-SG140114" 30 35 18 FD-SG140315" 90 37-1/2 18 FD-SG150215" 60 37-1/2 18 FD-SG150615" 45 37-1/2 18 FD-SG150115" 30 37-1/2 18 FD-SG150316" 90 40 18 FD-SG160216" 60 40 18 FD-SG160616" 45 40 18 FD-SG160116" 30 40 18 FD-SG160317" 90 42-1/2 18 FD-SG170217" 60 42-1/2 18 FD-SG170617" 45 42-1/2 18 FD-SG170117" 30 42-1/2 18 FD-SG170318" 90 45 18 FD-SG180218" 60 45 18 FD-SG180618" 45 45 18 FD-SG180118" 30 45 18 FD-SG180319" 90 47-1/2 18 FD-SG190219" 60 47-1/2 18 FD-SG190619" 45 47-1/2 18 FD-SG190119" 30 47-1/2 18 FD-SG190320" 90 50 18 FD-SG200220" 60 50 18 FD-SG200620" 45 50 18 FD-SG200120" 30 50 18 FD-SG200322" 90 55 18 FD-SG220222" 60 55 18 FD-SG220622" 45 55 18 FD-SG220122" 30 55 18 FD-SG220324" 90 60 18 FD-SG240224" 60 60 18 FD-SG240624" 45 60 18 FD-SG240124" 30 60 18 FD-SG240326" 90 65 18 FD-SG260226" 60 65 18 FD-SG260626" 45 65 18 FD-SG260126" 30 65 18 FD-SG260328" 90 70 18 FD-SG280228" 60 70 18 FD-SG280628" 45 70 18 FD-SG280128" 30 70 18 FD-SG2803

Flanged End Elbows

Segmented Elbows cont.• Our gored, multi-purpose, smooth walled elbow• Available in Standard and Long Radius• Available in 30, 45, 60, and 90 Degree• Available in 7” through 48” Diameter• Available in zinc or stainless• All seams are welded or brazed



42" 90 63 18 FD-SG424242" 60 63 18 FD-SG424642" 45 63 18 FD-SG424142" 30 63 18 FD-SG424344" 90 66 18 FD-SG444244" 60 66 18 FD-SG444644" 45 66 18 FD-SG444144" 30 66 18 FD-SG444346" 90 69 18 FD-SG464246" 60 69 18 FD-SG464646" 45 69 18 FD-SG464146" 30 69 18 FD-SG464348" 90 72 18 FD-SG484248" 60 72 18 FD-SG484648" 45 72 18 FD-SG484148" 30 72 18 FD-SG4843

Segmented Elbow













Flanged End Elbows



30" 90 75 18 FD-SG300230" 60 75 18 FD-SG300630" 45 75 18 FD-SG300130" 30 75 18 FD-SG300332" 90 80 18 FD-SG320232" 60 80 18 FD-SG320632" 45 80 18 FD-SG320132" 30 80 18 FD-SG320334" 90 85 18 FD-SG340234" 60 85 18 FD-SG340634" 45 85 18 FD-SG340134" 30 85 18 FD-SG340336" 90 90 18 FD-SG360236" 60 90 18 FD-SG360636" 45 90 18 FD-SG360136" 30 90 18 FD-SG360338" 90 95 18 FD-SG380238" 60 95 18 FD-SG380638" 45 95 18 FD-SG380138" 30 95 18 FD-SG380340" 90 100 18 FD-SG400240" 60 100 18 FD-SG400640" 45 100 18 FD-SG400140" 30 100 18 FD-SG400342" 90 105 18 FD-SG420242" 60 105 18 FD-SG420642" 45 105 18 FD-SG420142" 30 105 18 FD-SG420344" 90 110 18 FD-SG440244" 60 110 18 FD-SG440644" 45 110 18 FD-SG440144" 30 110 18 FD-SG440346" 90 115 18 FD-SG460246" 60 115 18 FD-SG460646" 45 115 18 FD-SG460146" 30 115 18 FD-SG460348" 90 120 18 FD-SG480248" 60 120 18 FD-SG480648" 45 120 18 FD-SG480148" 30 120 18 FD-SG4803

Pleated/Non-WeldedElbows• Our general purpose, low cost, unidirectional elbow. For

applications where “Airtight” is not a requirement.• Available in 3” through 15” diameter• Available in Standard and Long Radius• Available in 30, 45, 60, and 90 Degree• Available in Galvanized only



3" 90 4-1/2 22 FD-PL3423" 60 4-1/2 22 FD-PL3463" 45 4-1/2 22 FD-PL3413" 30 4-1/2 22 FD-PL3434" 90 6 22 FD-PL4424" 60 6 22 FD-PL4464" 45 6 22 FD-PL4414" 30 6 22 FD-PL4435" 90 7-1/2 22 FD-PL5425" 60 7-1/2 22 FD-PL5465" 45 7-1/2 22 FD-PL5415" 30 7-1/2 22 FD-PL5436" 90 9 22 FD-PL6426" 60 9 22 FD-PL6466" 45 9 22 FD-PL6416" 30 9 22 FD-PL6437" 90 10-1/2 22 FD-PL7427" 60 10-1/2 22 FD-PL7467" 45 10-1/2 22 FD-PL7417" 30 10-1/2 22 FD-PL7438" 90 12 22 FD-PL8428" 60 12 22 FD-PL8468" 45 12 22 FD-PL8418" 30 12 22 FD-PL8439" 90 13-1/2 20 FD-PL9429" 60 13-1/2 20 FD-PL9469" 45 13-1/2 20 FD-PL9419" 30 13-1/2 20 FD-PL94310" 90 15 20 FD-PL104210" 60 15 20 FD-PL104610" 45 15 20 FD-PL104110" 30 15 20 FD-PL104311" 90 16-1/2 20 FD-PL114211" 60 16-1/2 20 FD-PL114611" 45 16-1/2 20 FD-PL114111" 30 16-1/2 20 FD-PL114312" 90 18 20 FD-PL124212" 60 18 20 FD-PL124612" 45 18 20 FD-PL124112" 30 18 20 FD-PL1243

Flanged/PleatedNon-Welded Elbow

Segmented Elbows cont.



• Available in 3” through 15”diameter



• When using the adjustablefeature of the fitting, anadditional O-Ring must beordered.




Flanged End Elbows

Pleated/Non-Welded Elbows cont.• Our general purpose, low cost, unidirectional elbow. For applications where “Airtight” is not a requirement.• Available in 3” through 15” diameter• Available in Standard and Long Radius• Available in 30, 45, 60, and 90 Degree• When using the adjustable feature of the fitting, an additional O-Ring must be ordered.• Available in Galvanized only





3" 90 7-1/2 22 FD-PL3023" 60 7-1/2 22 FD-PL3063" 45 7-1/2 22 FD-PL3013" 30 7-1/2 22 FD-PL3034" 90 10 22 FD-PL4024" 60 10 22 FD-PL4064" 45 10 22 FD-PL4014" 30 10 22 FD-PL4035" 90 12-1/2 22 FD-PL5025" 60 12-1/2 22 FD-PL5065" 45 12-1/2 22 FD-PL5015" 30 12-1/2 22 FD-PL5036" 90 15 22 FD-PL6026" 60 15 22 FD-PL6066" 45 15 22 FD-PL6016" 30 15 22 FD-PL6037" 90 17-1/2 22 FD-PL7027" 60 17-1/2 22 FD-PL7067" 45 17-1/2 22 FD-PL7017" 30 17-1/2 22 FD-PL7038" 90 20 22 FD-PL8028" 60 20 22 FD-PL8068" 45 20 22 FD-PL8018" 30 20 22 FD-PL8039" 90 22-1/2 20 FD-PL9129" 60 22-1/2 20 FD-PL9069" 45 22-1/2 20 FD-PL9019" 30 22-1/2 20 FD-PL903



10" 90 25 20 FD-PL100210" 60 25 20 FD-PL100610" 45 25 20 FD-PL100110" 30 25 20 FD-PL100311" 90 27-1/2 20 FD-PL110211" 60 27-1/2 20 FD-PL110611" 45 27-1/2 20 FD-PL110111" 30 27-1/2 20 FD-PL110312" 90 30 20 FD-PL120212" 60 30 20 FD-PL120612" 45 30 20 FD-PL120112" 30 30 20 FD-PL120313" 90 32-1/2 20 FD-PL130213" 60 32-1/2 20 FD-PL130613" 45 32-1/2 20 FD-PL130113" 30 32-1/2 20 FD-PL130314" 90 35 20 FD-PL140214" 60 35 20 FD-PL140614" 45 35 20 FD-PL140114" 30 35 20 FD-PL140315" 90 37-1/2 20 FD-PL150215" 60 37-1/2 20 FD-PL150615" 45 37-1/2 20 FD-PL150115" 30 37-1/2 20 FD-PL1503

13" 90 19-1/2 20 FD-PL134213" 60 19-1/2 20 FD-PL134613" 45 19-1/2 20 FD-PL134113" 30 19-1/2 20 FD-PL134314" 90 21 20 FD-PL144214" 60 21 20 FD-PL144614" 45 21 20 FD-PL144114" 30 21 20 FD-PL144315" 90 22-1/2 20 FD-PL154215" 60 22-1/2 20 FD-PL154615" 45 22-1/2 20 FD-PL154115" 30 22-1/2 20 FD-PL1543

PleatedNon-Welded Elbow








• When using the adjustablefeature of the fitting, anadditional O-Ring must beordered.





Flanged End Elbows

Pleated/Welded Elbows• Our unidirectional, airtight, elbow of pleated construction• Available in 3” through 15” diameter• Available in Standard and Long Radius• Available in 30, 45, 60, and 90 Degree• Available in Galvanized only

Standard Radius (1.5) times OD Standard Radius (1.5) cont.

Dia. Degree CLR Gauge Part no.Dia. Degree CLR Gauge Part No.

3" 90 4-1/2 22 FD-PW3423" 60 4-1/2 22 FD-PW3463" 45 4-1/2 22 FD-PW3413" 30 4-1/2 22 FD-PW3434" 90 6 22 FD-PW4424" 60 6 22 FD-PW4464" 45 6 22 FD-PW4414" 30 6 22 FD-PW4435" 90 7-1/2 22 FD-PW5425" 60 7-1/2 22 FD-PW5465" 45 7-1/2 22 FD-PW5415" 30 7-1/2 22 FD-PW5436" 90 9 22 FD-PW6426" 60 9 22 FD-PW6466" 45 9 22 FD-PW6416" 30 9 22 FD-PW6437" 90 10-1/2 22 FD-PW7427" 60 10-1/2 22 FD-PW7467" 45 10-1/2 22 FD-PW7417" 30 10-1/2 22 FD-PW7438" 90 12 22 FD-PW8428" 60 12 22 FD-PW8468" 45 12 22 FD-PW8418" 30 12 22 FD-PW8439" 90 13-1/2 20 FD-PW9429" 60 13-1/2 20 FD-PW9469" 45 13-1/2 20 FD-PW9419" 30 13-1/2 20 FD-PW94310" 90 15 20 FD-PW104210" 60 15 20 FD-PW104610" 45 15 20 FD-PW104110" 30 15 20 FD-PW104311" 90 16-1/2 20 FD-PW114211" 60 16-1/2 20 FD-PW114611" 45 16-1/2 20 FD-PW114111" 30 16-1/2 20 FD-PW114312" 90 18 20 FD-PW124212" 60 18 20 FD-PW124612" 45 18 20 FD-PW124112" 30 18 20 FD-PW124313" 90 19-1/2 20 FD-PW134213" 60 19-1/2 20 FD-PW134613" 45 19-1/2 20 FD-PW134113" 30 19-1/2 20 FD-PW1343

14" 90 21 20 FD-PW144214" 60 21 20 FD-PW144614" 45 21 20 FD-PW144114" 30 21 20 FD-PW144315" 90 22-1/2 20 FD-PW154215" 60 22-1/2 20 FD-PW154615" 45 22-1/2 20 FD-PW154115" 30 22-1/2 20 FD-PW1543



3" 90 7-1/2 22 FD-PW3023" 60 7-1/2 22 FD-PW3063" 45 7-1/2 22 FD-PW3013" 30 7-1/2 22 FD-PW3034" 90 10 22 FD-PW4024" 60 10 22 FD-PW4064" 45 10 22 FD-PW4014" 30 10 22 FD-PW4035" 90 12-1/2 22 FD-PW5025"" 60 12-1/2 22 FD-PW5065" 45 12-1/2 22 FD-PW5015" 30 12-1/2 22 FD-PW5036" 90 15 22 FD-PW6026" 60 15 22 FD-PW6066" 45 15 22 FD-PW6016" 30 15 22 FD-PW6037" 90 17-1/2 22 FD-PW7027" 60 17-1/2 22 FD-PW7067" 45 17-1/2 22 FD-PW7017" 30 17-1/2 22 FD-PW7038" 90 20 22 FD-PW8028" 60 20 22 FD-PW8068" 45 20 22 FD-PW8018" 30 20 22 FD-PW8039" 90 22-1/2 20 FD-PW9029" 60 22-1/2 20 FD-PW9069" 45 22-1/2 20 FD-PW9019" 30 22-1/2 20 FD-PW90310" 90 25 20 FD-PW100210" 60 25 20 FD-PW100610" 45 25 20 FD-PW100110" 30 25 20 FD-PW1003

PleatedWelded Elbow











Pleated/Welded Elbow cont.• Our unidirectional, airtight, elbow of pleated construction• Available in 3” through 15” diameter• Available in Standard and Long Radius• Available in 30, 45, 60, and 90 Degree• Available in Galvanized only



11" 90 27-1/2 20 FD-PW110211" 60 27-1/2 20 FD-PW110611" 45 27-1/2 20 FD-PW110111" 30 27-1/2 20 FD-PW110312" 90 30 20 FD-PW120212" 60 30 20 FD-PW120612" 45 30 20 FD-PW120112" 30 30 20 FD-PW120313" 90 32-1/2 20 FD-PW130213" 60 32-1/2 20 FD-PW130613" 45 32-1/2 20 FD-PW130113" 30 32-1/2 20 FD-PW130314" 90 35 20 FD-PW140214" 60 35 20 FD-PW140614" 45 35 20 FD-PW140114" 30 35 20 FD-PW140315" 90 37-1/2 20 FD-PW150215" 60 37-1/2 20 FD-PW150615" 45 37-1/2 20 FD-PW150115" 30 37-1/2 20 FD-PW1503

Flanged End Elbows

Flanged/PleatedWelded Elbow










Flanged End Fittings

90º Branches(Tee on Taper)• Available in 3” through 48” Diameter


3" 90 18 FD-18TEE3004" 90 18 FD-18TEE4005" 90 18 FD-18TEE5006" 90 18 FD-18TEE6007" 90 18 FD-18TEE7008" 90 18 FD-18TEE8009" 90 18 FD-18TEE90010" 90 18 FD-18TEE100011" 90 18 FD-18TEE110012" 90 18 FD-18TEE120013" 90 18 FD-18TEE130014" 90 18 FD-18TEE140015” 90 18 FD-18TEE150016" 90 18 FD-18TEE160017" 90 18 FD-18TEE170018" 90 18 FD-18TEE180019" 90 18 FD-18TEE190020" 90 18 FD-18TEE200022" 90 18 FD-18TEE220024" 90 18 FD-18TEE240026" 90 18 FD-18TEE260028" 90 18 FD-18TEE280030" 90 16 FD-16TEE300032" 90 16 FD-16TEE320034" 90 16 FD-16TEE340036" 90 16 FD-16TEE360038" 90 16 FD-16TEE380040" 90 16 FD-16TEE400042" 90 16 FD-16TEE420044" 90 16 FD-16TEE440046" 90 16 FD-16TEE460048" 90 16 FD-16TEE4800


3" 30 18 FD-18YL30033" 45 18 FD-18YL30014" 30 18 FD-18YL40034" 45 18 FD-18YL40015" 30 18 FD-18YL50035" 45 18 FD-18YL50016" 30 18 FD-18YL60036" 45 18 FD-18YL60017" 30 18 FD-18YL70037" 45 18 FD-18YL70018" 30 18 FD-18YL80038" 45 18 FD-18YL80019" 30 18 FD-18YL90039" 45 18 FD-18YL900110" 30 18 FD-18YL1000310" 45 18 FD-18YL1000111" 30 18 FD-18YL1100311" 45 18 FD-18YL1100112" 30 18 FD-18YL1200312" 45 18 FD-18YL1200113" 30 18 FD-18YL1300313" 45 18 FD-18YL1300114" 30 18 FD-18YL1400314" 45 18 FD-18YL1400115" 30 18 FD-18YL1500315" 45 18 FD-18YL1500116" 30 18 FD-18YL1600316" 45 18 FD-18YL1600117" 30 18 FD-18YL1700317" 45 18 FD-18YL1700118" 30 18 FD-18YL1800318" 45 18 FD-18YL1800119" 30 18 FD-18YL1900319" 45 18 FD-18YL1900120" 30 18 FD-18YL2000320" 45 18 FD-18YL2000122" 30 18 FD-18YL2200322" 45 18 FD-18YL2200124" 30 18 FD-18YL2400324" 45 18 FD-18YL2400126" 30 18 FD-18YL2600326" 45 18 FD-18YL2600128" 30 18 FD-18YL2800328" 45 18 FD-18YL28001

YL Branches(Tee on Taper)• Available in 3” through 48” Diameter• Available in 30 & 45 Degree

90° Branch

YL Branch

• Available in larger sizes, callfor pricing





30" 30 16 FD-16YL3000330" 45 16 FD-16YL3000132" 30 16 FD-16YL3200332" 45 16 FD-16YL3200134" 30 16 FD-16YL3400334" 45 16 FD-16YL3400136" 30 16 FD-16YL3600336" 45 16 FD-16YL3600138" 30 16 FD-16YL3800338" 45 16 FD-16YL3800140" 30 16 FD-16YL4000340" 45 16 FD-16YL4000142" 30 16 FD-16YL4200342" 45 16 FD-16YL4200144" 30 16 FD-16YL4400344" 45 16 FD-16YL4400146" 30 16 FD-16YL4600346" 45 16 FD-16YL4600148" 30 16 FD-16YL4800348" 45 16 FD-16YL48001


3" 30 18 FD-18DYL30033" 45 18 FD-18DYL30014" 30 18 FD-18DYL40034" 45 18 FD-18DYL40015" 30 18 FD-18DYL50035" 45 18 FD-18DYL50016" 30 18 FD-18DYL60036" 45 18 FD-18DYL60017" 30 18 FD-18DYL70037" 45 18 FD-18DYL70018" 30 18 FD-18DYL80038" 45 18 FD-18DYL80019" 30 18 FD-18DYL90039" 45 18 FD-18DYL900110" 30 18 FD-18DYL1000310" 45 18 FD-18DYL1000111" 30 18 FD-18DYL1100311" 45 18 FD-18DYL1100112" 30 18 FD-18DYL1200312" 45 18 FD-18DYL1200113" 30 18 FD-18DYL1300313" 45 18 FD-18DYL1300114" 30 18 FD-18DYL1400314" 45 18 FD-18DYL1400115" 30 18 FD-18DYL1500315" 45 18 FD-18DYL1500116" 30 18 FD-18DYL1600316" 45 18 FD-18DYL1600117" 30 18 FD-18DYL1700317" 45 18 FD-18DYL1700118" 30 18 FD-18DYL1800318" 45 18 FD-18DYL1800119" 30 18 FD-18DYL1900319" 45 18 FD-18DYL1900120" 30 18 FD-18DYL2000320" 45 18 FD-18DYL2000122" 30 18 FD-18DYL2200322" 45 18 FD-18DYL2200124" 30 18 FD-18DYL2400324" 45 18 FD-18DYL2400126" 30 18 FD-18DYL2600326" 45 18 FD-18DYL2600128" 30 18 FD-18DYL2800328" 45 18 FD-18DYL2800130" 30 16 FD-16DYL3000330" 45 16 FD-16DYL3000132" 30 16 FD-16DYL3200332" 45 16 FD-16DYL32001

Dia. Degree Gauge Part no.

YL Branches cont.(Tee on Taper)• Available in 3” through 48” Diameter• Available in 30 and 45 Degree

Double YL Branches• Available in 3” through 48” Diameter• Available in 30 and 45 Degree

Double YL Branch






34" 30 16 FD-16DYL3400334" 45 16 FD-16DYL3400136" 30 16 FD-16DYL3600336" 45 16 FD-16DYL3600138" 30 16 FD-16DYL3800338" 45 16 FD-16DYL3800140" 30 16 FD-16DYL4000340" 45 16 FD-16DYL4000142" 30 16 FD-16DYL4200342" 45 16 FD-16DYL4200144" 30 16 FD-16DYL4400344" 45 16 FD-16DYL4400146" 30 16 FD-16DYL4600346" 45 16 FD-16DYL4600148" 30 16 FD-16DYL4800348" 45 16 FD-16DYL48001


4" 30 18 FD-18DY40034" 45 18 FD-18DY40015" 30 18 FD-18DY50035" 45 18 FD-18DY50016" 30 18 FD-18DY60036" 45 18 FD-18DY60017" 30 18 FD-18DY70037" 45 18 FD-18DY70018" 30 18 FD-18DY80038" 45 18 FD-18DY80019" 30 18 FD-18DY90039" 45 18 FD-18DY900110" 30 18 FD-18DY1000310" 45 18 FD-18DY1000111" 30 18 FD-18DY1100311" 45 18 FD-18DY1100112" 30 18 FD-18DY1200312" 45 18 FD-18DY1200113" 30 18 FD-18DY1300313" 45 18 FD-18DY1300114" 30 18 FD-18DY1400314" 45 18 FD-18DY1400115" 30 18 FD-18DY1500315" 45 18 FD-18DY1500116" 30 18 FD-18DY1600316" 45 18 FD-18DY1600117" 30 18 FD-18DY1700317" 45 18 FD-18DY1700118" 30 18 FD-18DY1800318" 45 18 FD-18DY1800119" 30 18 FD-18DY1900319" 45 18 FD-18DY1900120" 30 18 FD-18DY2000320" 45 18 FD-18DY2000122" 30 18 FD-18DY2200322" 45 18 FD-18DY2200124" 30 18 FD-18DY2400324" 45 18 FD-18DY2400126" 30 18 FD-18DY2600326" 45 18 FD-18DY2600128" 30 18 FD-18DY2800328" 45 18 FD-18DY2800130" 30 16 FD-16DY3000330" 45 16 FD-16DY3000132" 30 16 FD-16DY3200332" 45 16 FD-16DY32001

Double Y Branches• Used to join 2 branches to the main angle of 30 or 45

Degrees.• Available in 4” through 48” Diameter


Double Y Branch


Double YL cont.





34" 30 16 FD-16DY3400334" 45 16 FD-16DY3400136" 30 16 FD-16DY3600336" 45 16 FD-16DY3600138" 30 16 FD-16DY3800338" 45 16 FD-16DY3800140" 30 16 FD-16DY4000340" 45 16 FD-16DY4000142" 30 16 FD-16DY4200342" 45 16 FD-16DY4200144" 30 16 FD-16DY4400344" 45 16 FD-16DY4400146" 30 16 FD-16DY4600346" 45 16 FD-16DY4600148" 30 16 FD-16DY4800348" 45 16 FD-16DY48001

Flanged End Reducers• Available in all diameters• Reducers are prices by the large end• Length is determined by the dimension of the reducer

Dia. Gauge Part No.

3" 20 FD-RC3004" 20 FD-RC4005" 20 FD-RC5006" 20 FD-RC6007" 20 FD-RC7008" 20 FD-RC8009" 20 FD-RC90010" 20 FD-RC100011" 20 FD-RC110012" 20 FD-RC120013" 20 FD-RC130014" 20 FD-RC140015" 20 FD-RC150016" 20 FD-RC160017" 20 FD-RC170018" 20 FD-RC180019" 20 FD-RC190020" 20 FD-RC200022" 20 FD-RC220024" 18 FD-RC240026" 18 FD-RC260028 18 FD-RC280030" 16 FD-RC300032" 16 FD-RC320034" 16 FD-RC340036" 16 FD-RC360038" 16 FD-RC380040" 16 FD-RC400042" 16 FD-RC420044" 16 FD-RC440046" 16 FD-RC460048" 16 FD-RC4800

Flanged End Adapters• Available in 3” through 22” Diameter


3"* 8 24 FD-AD3004"* 8 24 FD-AD4005"* 8 24 FD-AD5006"* 8 24 FD-AD6007" 8 22 FD-AD7008" 8 22 FD-AD8009" 8 22 FD-AD90010" 8 22 FD-AD100011" 8 22 FD-AD110012" 8 22 FD-AD120013" 8 20 FD-AD130014" 8 20 FD-AD140015" 8 20 FD-AD150016" 8 20 FD-AD160017" 8 20 FD-AD170018" 8 20 FD-AD180019" 8 20 FD-AD190020" 8 20 FD-AD200022" 8 20 FD-AD2200

Double Y Branches cont.

Flanged End Reducers

Flanged End Adapters






Flanged End Supplemental Components

Blast Gates• Airtight Seal• May be used with positive or negative pressure• Not to be used if material is in the air stream• Available in 3” through 22” in Diameter

Dia. Stub Gauge Part No.

3" 2-1/2" 14 FD-BG143004" 2-1/2" 14 FD-BG144005" 2-1/2" 14 FD-BG145006" 2-1/2" 14 FD-BG146007" 2-1/2" 14 FD-BG147008" 2-1/2" 14 FD-BG148009" 2-1/2" 14 FD-BG1490010" 2-1/2" 14 FD-BG14100011" 2-1/2" 14 FD-BG14110012" 2-1/2" 14 FD-BG14120013" 2-1/2" 14 FD-BG14130014" 2-1/2" 14 FD-BG14140015" 2-1/2" 14 FD-BG14150016" 2-1/2" 14 FD-BG14160017" 2-1/2" 14 FD-BG14170018" 2-1/2" 14 FD-BG14180019" 2-1/2" 14 FD-BG14190020" 2-1/2" 14 FD-BG14200022" 2-1/2" 14 FD-BG142200

Cut-Offs• Available in 3” through 22” Diameter


3"* 2-1/2" 26 FD-CF3004"* 2-1/2" 24 FD-CF4005"* 2-1/2" 24 FD-CF5006"* 2-1/2" 24 FD-CF6007" 2-1/2" 22 FD-CF7008" 2-1/2" 22 FD-CF8009" 2-1/2" 22 FD-CF90010" 2-1/2" 22 FD-CF100011" 2-1/2" 22 FD-CF110012" 2-1/2" 22 FD-CF120014" 2-1/2" 20 FD-CF140016" 2-1/2" 20 FD-CF160018" 2-1/2" 20 FD-CF180020" 2-1/2" 20 FD-CF200022" 2-1/2" 20 FD-CF2200

Rectangular toRound Transitions• Available in 3” through 48” Diameter• Available with or without flanges

Diameter Gauge Part No.

3" 20 FD-RRT3004" 20 FD-RRT4005" 20 FD-RRT5006" 20 FD-RRT6007" 20 FD-RRT7008" 20 FD-RRT8009" 20 FD-RRT90010" 20 FD-RRT100011" 20 FD-RRT110012" 20 FD-RRT120013" 20 FD-RRT130014" 20 FD-RRT140015" 18 FD-RRT150016" 18 FD-RRT160017" 18 FD-RRT170018" 18 FD-RRT180019" 18 FD-RRT190020" 18 FD-RRT200022" 18 FD-RRT220024" 18 FD-RRT240026" 18 FD-RRT260028" 18 FD-RRT280030" 16 FD-RRT300032" 16 FD-RRT320034" 16 FD-RRT340036" 16 FD-RRT360038" 16 FD-RRT380040" 16 FD-RRT400042" 16 FD-RRT420044" 16 FD-RRT440046" 16 FD-RRT460048" 16 FD-RRT4800

• STUB LENGTH IS PER SIDE

Blast Gate

Cut Off (full)

Cut Off (half)

Rectangular to RoundTransition




Flanged End Supplemental Components

In-Cuts• Available in 3” through 48” in Diameter

Diameter Degree Gauge Part No.

3" 90 18 FD-90CUT3003" 45 18 FD-45CUT3003" 30 18 FD-30CUT3004" 90 18 FD-90CUT4004" 45 18 FD-45CUT4004" 30 18 FD-30CUT4005" 90 18 FD-90CUT5005" 45 18 FD-45CUT5005" 30 18 FD-30CUT5006" 90 18 FD-90CUT6006" 45 18 FD-45CUT6006" 30 18 FD-30CUT6007" 90 18 FD-90CUT7007" 45 18 FD-45CUT7007" 30 18 FD-30CUT7008" 90 18 FD-90CUT8008" 45 18 FD-45CUT8008" 30 18 FD-30CUT8009" 90 18 FD-90CUT9009" 45 18 FD-45CUT9009" 30 18 FD-30CUT90010" 90 18 FD-90CUT100010" 45 18 FD-45CUT100010" 30 18 FD-30CUT100011" 90 18 FD-90CUT110011" 45 18 FD-45CUT110011" 30 18 FD-30CUT110012" 90 18 FD-90CUT120012" 45 18 FD-45CUT120012" 30 18 FD-30CUT120013" 90 18 FD-90CUT130013" 45 18 FD-45CUT130013" 30 18 FD-30CUT130014" 90 18 FD-90CUT140014" 45 18 FD-45CUT140014" 30 18 FD-30CUT140015" 90 18 FD-90CUT150015" 45 18 FD-45CUT150015" 30 18 FD-30CUT150016" 90 18 FD-90CUT160016" 45 18 FD-45CUT160016" 30 18 FD-30CUT160017" 90 18 FD-90CUT170017" 45 18 FD-45CUT170017" 30 18 FD-30CUT170018" 90 18 FD-90CUT180018" 45 18 FD-45CUT180018" 30 18 FD-30CUT1800

In-Cuts cont.


19" 90 18 FD-90CUT190019" 45 18 FD-45CUT190019" 30 18 FD-30CUT190020" 90 18 FD-90CUT200020" 45 18 FD-45CUT200020" 30 18 FD-30CUT200022" 90 18 FD-90CUT220022" 45 18 FD-45CUT220022" 30 18 FD-30CUT220024" 90 18 FD-90CUT240024" 45 18 FD-45CUT240024" 30 18 FD-30CUT240026" 90 18 FD-90CUT260026" 45 18 FD-45CUT260026" 30 18 FD-30CUT260028" 90 18 FD-90CUT280028" 45 18 FD-45CUT280028" 30 18 FD-30CUT280030" 90 16 FD-90CUT300030" 45 16 FD-45CUT300030" 30 16 FD-30CUT300032" 90 16 FD-90CUT320032" 45 16 FD-45CUT320032" 30 16 FD-30CUT320034" 90 16 FD-90CUT340034" 45 16 FD-45CUT340034" 30 16 FD-30CUT340036" 90 16 FD-90CUT360036" 45 16 FD-45CUT360036" 30 16 FD-30CUT360038" 90 16 FD-90CUT380038" 45 16 FD-45CUT380038" 30 16 FD-30CUT380040" 90 16 FD-90CUT400040" 45 16 FD-45CUT400040" 30 16 FD-30CUT400042" 90 16 FD-90CUT420042" 45 16 FD-45CUT420042" 30 16 FD-30CUT420044" 90 16 FD-90CUT440044" 45 16 FD-45CUT440044" 30 16 FD-30CUT440046" 90 16 FD-90CUT460046" 45 16 FD-45CUT460046" 30 16 FD-30CUT460048" 90 16 FD-90CUT480048" 45 16 FD-45CUT480048" 30 16 FD-30CUT4800

45° In Cut

90° In Cut




Notes

512 West Gorgas St. / P.O. Box 3912Louisville, Ohio 44641-3912

1.800.860.TUBE (8823) 330.875.7155 faxwww.metflo.com

© 2002 H-P Products, Inc.S-120-0048

HP Products Duct Catalog

Documents

Transcript of HP Products Duct Catalog