7/25/2019 HP 1920 Comandos

1/3

HP v1910 Secret Commando list ( how to enable it )Fred / 21 August 2012

Make a Telnet ( when enabled or via the console cable ) a connection the the switch.Type the admin information and when entered a Password ( default no password )

To enable the secret command line commands: you have to type the following command: _cmdline-mode on

And press enter. You will get a question. Answer this question with Yes.

If you dont have a password you will get a popup notification on the CLI Type the code 512900

You get the User View commands if you press ?

?User view commands: archive Specify archive settings backup Backup next startup-configuration file to TFTP server boot-loader Set boot loader bootrom Update/read/backup/restore bootrom

cd Change current directoryclock Specify the system clock cluster Run cluster command copy Copy from one file to anotherdebugging Enable system debugging functions

delete Delete a filedir List files on a file systemdisplay Display current system information

fixdisk Recover lost chains in storage device format Format the device free Clear user terminal interface ftp Open FTP connectioninitialize Delete the startup configuration file and reboot system

ipsetup Specify the IP address of the VLAN interface 1lock Lock current user terminal interface logfile Specify log file configuration mkdir Create a new directorymore Display the contents of a filemove Move the filentdp Run NTDP commands

password Specify password of local user ping Ping functionpwd Display current working directoryquit Exit from current command view

reboot Reboot system rename Rename a file or directory

reset Reset operation restore Restore next startup-configuration file from TFTP serverrmdir Remove an existing directorysave Save current configuration

schedule Schedule system task screen-length Specify the lines displayed on one screen send Send information to other user terminal interface sftp Establish one SFTP connectionssh2 Establish a secure shell client connectionstack Switch stack system

7/25/2019 HP 1920 Comandos

2/3

startup Specify system startup parameterssummary Display summary information of the device.

super Set the current user priority levelsystem-view Enter the System View

telnet Establish one TELNET connectionterminal Set the terminal line characteristicstftp Open TFTP connectiontracert Trace route functionundelete Recover a deleted fileundo Cancel current setting

upgrade Upgrade the system boot file or the Boot ROM program

When you type SYS of system-view. You will get the list of system admin commands.

system-viewSystem View: return to User View with Ctrl+Z.[HPv1910]?System view commands: aaa Specify AAA configuration acl Specify acl configuration information archive Specify archive settings arp Specify ARP configuration informationbootrom-update bootrom update

clock Specify the system clock cluster Specify cluster configuration information command-privilege Specify the command levelconfiguration Specify configuration settings

copyright-info Copyright information configuration cut Cut connection delete Delete function dhcp DHCP configuration subcommandsdhcp-snooping DHCP Snooping

display Display current system information domain Add domain or modify domain attributes dot1x Specify 802.1X configuration informationexecute Batch Command

file Specify file system configuration informationftp Specify FTP configuration informationgratuitous-arp-learning Gratuitous Arp learning functiongratuitous-arp-sending Sending gratuitous-arp packet when receiving

different sub-network arp packet functionhabp Specify HABP configuration information

header Specify the login bannerhotkey Specify hotkey configuration informationigmp-snooping IGMP snooping

info-center Specify information center configuration information interface Specify the interface configuration viewip Specify IP configurations for the system

job Schedule a system task

jumboframe Jumboframe command lacp Configure LACP Protocol lldp Link Layer Discovery Protocol(802.1ab)local-user Specify local user configuration information

logfile Specify log file configuration loopback-detection Detect if loopback exists mac-address Configure MAC address mirroring-group Specify mirroring-group multicast-vlan Multicast VLAN ndp Neighbor discovery protocol

7/25/2019 HP 1920 Comandos

3/3

ntdp Specify NTDP configuration information ntp-service Specify NTP(Network Time Protocol) configuration

information ping Ping functionpki Specify PKI module configuration information

port-group Port grouppublic-key Specify public-key module configuration information

qos Command of QoS(Quality of Service) quit Exit from current command view radius Specify RADIUS configuration information return Exit to User Viewrmon Specify RMON

save Save current configuration sftp Specify SFTP service attribute snmp-agent Specify SNMP(Simple Network Management Protocol)

configuration information ssh Specify SSH (secure shell) configuration information ssl Specify SSL (Secure Socket Layer) configuration

information stack Switch stack system storm-constrain Port storm-constrain stp Spanning tree protocol super Modify super password parameters sysname Specify the host name

system-failure System failure handling methodsystem-guard System guard functiontcp Specify TCP(Transmission Control Protocol)

configuration informationtelnet Specify TELNET configuration information

temperature-limit Set temperature limit tftp Specify TFTP configuration information tftp-server TFTP Servertime-range Specify time-range configuration information

tracert Trace route functiontraffic Specify traffic configuration information

undo Cancel current setting user-group Specify user group configuration information

user-interface Configure the user terminal interfacevlan Configure VLAN voice Specify voice VLAN web Web configuration