Howard Brooks

5053 East Otero Circle, Centennial Colorado, 80122Cell 303-619-39984 – hgbrooks@gmail.com

ProfessionalSummary

Core Qualifications

Skilled and highly experienced Piping Designer. Strongly proficient in 3D related and supporting software. Adept at presentation of design to decision makers.

Vast experience in drafting and designing piping systems

Strong abilities in both piping and mechanical layout design High proficiency with MS Excel MS Outlook AutoCAD, Micro-station, Solid-works and Cadworx, Auto-plant, and PDS, and Plant 3D Excellent problem solving skills Extreme attention to detail Superior ability to present comprehensive materials to executives

Experience Senior Piping Designer August 2013 to January 2015Zachry Engineering Denver, Colorado

Piping design on EPC power projectsDeveloped 3D layouts designs and construction drawings for power

process piping systems on a power plant in Kentucky, on time and within budget

Developed 3D layouts, designs and developed construction drawings for a natural gas Co-generation power plant in Texas, on time and within budget

Produced piping isometrics in Isogen piping software for construction packages

Performed checks of design work performed by other designers and draftsman

Attended design meetings with management and customers

Senior Piping Designer February 2013 to July 2013Rooney Engineering Centennial, Colorado

Contract position working with CADWorx and AutoCAD for below ground piping design in gas supply industry in Pennsylvania.

Developed 3D design for piping systems gas midstream projects on the east coast

Designed compressor stations, gas filtration, and pig facilities.Produced piping layouts and developed isometrics using Isogen piping

softwarePerformed design checks of work of other designers

Senior Piping Designer August 2010 to January 2013Zachry Engineering Denver, Colorado

piping design for EPC power projects

Performed 3D design and construction drawings of piping systems on a power plant in Kentucky and co-generation plant in Texas

Performed 3D design and developed construction drawings for a natural gas Co-generation power plant in Texas

Produced piping isometrics in Isogen piping softwarePerformed checks of design work performed by othersAttended design meetings with management and customers

Senior Piping Designer August 2008 to January 2010Shaw Group Centennial, Colorado

Designed 3D models of new routing and existing piping systems for Monticello Nuclear Power plant EPC project all within a plant outage and time constraints

PDS, Solid works and solid works pipe routing for the design process Performed piping design layout and construction drawings for

Monticello nuclear power plant power uprate in northern Minnesota Performed solid works 3D design and layout of new and existing

mechanical equipment, valves and piping Developed construction drawings using Auto Cad and micro station Developed piping isometric construction drawings using AutoCAD Reviewed shop drawings, and Produced detailed construction

drawings Visited the plant site and made field notes Reviewed and checked work of other designers

Senior. Piping Designer June 2008 to August 2008 Lyntek Engineering Denver, Colorado

Performed 1099 Contract work using CADWorx and AutoCAD for mining process in Montana

Developed 3D design layouts and construction drawings for mechanical equipment such as crusher and feeders, hoppers

Developed 3D design layouts and construction drawings for pipe supports for pipe runs

Senior. Piping Designer July. 2007 to April 2008CH2Mhil Greenwood Village, Colorado

Designed piping for gas refinery Colorado, and Chemical process piping for Amgen supplier in Boulder. Worked on piping for clean room at drug production plants

Developed 3D computer generated models of piping systems, using PDS and Micro Station.

Developed construction and detail drawings for plant review and installations

Senior. Mechanical Designer August 2005 to June 2007

2 Howard Brooks

5053 East Otero Circle, Centennial Colorado, 80122Cell 303-619-39984 – Telephone – Email

Washington Group Denver, Colorado

Designed HVAC and mechanical systems for a DOE Nuclear Waste cleanup site in Idaho in PDS

Developed 3D computer generated models of piping and mechanical system using PDS and Micro Station

Developed construction drawings and detail drawings for DOE sites Developed 3D models for equipment layout and duct routing, using

PDS Developed 3D computer generated plant layouts and models for

preliminary project work, and proposals, using micro station Checked drawings of others for accuracy and conformity to DOE

plans Developed materials lists construction lists Reviewed and checked work of other designers Designed computer generated process piping systems using Plant

Space.

Senior Mechanical Designer August 2002 to August 2005Bechtel National Inc. Richland, Washington

Developed 3D computer generated HVAC duct systems for a $900 Billion DOE Nuclear Waste Plant using Micro Station and Plant Space.

Worked on Low level nuclear waste and clean room lab areas. Developed computer generated 3D models for plant layout using

Auto Plant, and Micro station Reviewed and checked work of other designers Developed

construction drawings as well as detailed drawings using Micro station for DOE

Developed 3D computer generated piping and equipment models using Plant Space Developed pipe support locations and details for project

Senior Mechanical Designer June 2000 to June 2002Stanley Group Englewood, Colorado

Designed computer generated 3D piping models for combined cycle power plants at SRP project in Arizona and EPC type

Performed detailed engineering calculations for steam, gas and fluid piping systems.

Designed 3D piping system models, using Auto Cad, and Plant Space

Performed site visits at in Arizona for field studies Worked on surgical clean room design for hospital in Boulder Developed 3D equipment and site layouts for new power plants and

combined cycle units in Montana and Arizona

Senior Mechanical Designer April 1999 to June 2000TXU Centennial,

3 Howard Brooks

5053 East Otero Circle, Centennial Colorado, 80122Cell 303-619-39984 – Telephone – Email

Colorado

Developed designs for energy saving designs for universities. Developed mechanical designs and remodel facilities at Francisco Hospital in Ohio

Worked on surgical clean room designPerformed Site survey work and walk downs.Developed 3D computer generated HVAC, piping models, using Auto

CadDeveloped construction drawings and detail drawings using Auto Cad

Senior Mechanical Designer April 1998 to April 2000Camp Dresser McKee Denver, Colorado

Developed piping and HVAC systems for water treatment plants for Denver Water and Arizona Water Treatment plants

Developed construction drawings in AutoCAD Performed field surveys and walk Downs

Education Pratt Institute, Brooklyn, NY, for Art and designEdison Community College Edison, NJMetro State College Denver, ColoradoArapahoe Community College Littleton, ColoradoVarious computer classes and advanced courses

Leadership Awards from Denver Chamber of Commerce for community workServed on Public Service Company Credit Union Board of DirectorsServed on HOA boards of two communitiesServed as team lead at Shaw Group, Bechtel, Stanley, and Washington

Group Coordinated major piping and tank removal and replacement projects

4 Howard Brooks

5053 East Otero Circle, Centennial Colorado, 80122Cell 303-619-39984 – Telephone – Email