How to Write the Program on the Chip Using BURN O MAT
5
Step 1 : Open Burn O MAT, Select Atmega 8 Step 2 :Go to Settings , then AVRDUDE
-
Upload
deepak-reddy -
Category
Documents
-
view
15 -
download
0
Transcript of How to Write the Program on the Chip Using BURN O MAT
Step 1 : Open Burn O MAT, Select Atmega 8
Step 2 :Go to Settings , then AVRDUDE
Step 3 : Change the location of path of both the files i.e .exe and .conf for WINAVR
Step 4 :Go to the main C Folder , where you installed WINAVR
Step 5: Go to bin
Step6 : Select the files , click ok.
Step 7 :Select the programmer as USBASP
Step 8 :Select the Com port 1
Step 9:Apply the settings.
Come to the main window , write the program