HOW TO VIEW YOUR CAMERAS REMOTELY FOR DVR SYSTEMS MODEL NUMBERS:

QSD9004, QSDR04RTC, QSDR008RTC, QSDR16RTC, QSDR16RTCB, QSDR174RTC

1 | P a g e

This guide is to instruct you on how to access your cameras on a computer outside of the network that your DVR is connected to.

STEP 1: Open Internet Explorer on the computer connected to the router you forwarded your ports from your DVR to.

STEP 2: Go to www.canyouseeme.org.

HOW TO VIEW YOUR CAMERAS REMOTELY FOR DVR SYSTEMS MODEL NUMBERS:

QSD9004, QSDR04RTC, QSDR008RTC, QSDR16RTC, QSDR16RTCB, QSDR174RTC

2 | P a g e

STEP 3: Your public IP is listed on this site.

STEP 4: Using Internet Explorer, enter your Public IP Address in the address bar on a computer outside of your network.

NOTE: If your HTTP port (Web port) is other than 80, you must enter it after your IP address followed by a colon. (:)

HOW TO VIEW YOUR CAMERAS REMOTELY FOR DVR SYSTEMS MODEL NUMBERS:

QSD9004, QSDR04RTC, QSDR008RTC, QSDR16RTC, QSDR16RTCB, QSDR174RTC

3 | P a g e

STEP 5: A small headline will appear as follows.

STEP 6: Right click on the headline and select “Run Add-on”.

STEP 7: A small box will appear; click “Run”. Once the ActiveX Control has successfully been added, press “F5” to refresh your browser.

HOW TO VIEW YOUR CAMERAS REMOTELY FOR DVR SYSTEMS MODEL NUMBERS:

QSD9004, QSDR04RTC, QSDR008RTC, QSDR16RTC, QSDR16RTCB, QSDR174RTC

4 | P a g e

STEP 8: A blue screen will appear. Enter your password from your DVR (default is 123456).

STEP 9: The following application will appear so that you may view your cameras.