How to Use the HomePure Water Prefilter

1
Do rust and dirt from your water supply reduce the performance of your HomePure 7-Stage Water Filtration System or HomePure Eaze? Here’s an excellent solution – Encapsulated Filter Encapsulated for clean and safe filtration process without contamination from the outside. Connect the plastic tube to the diverter valve. Tighten the cap. Release the covers of the sealed nozzles. Connect both the ¼ inch elbow fittings to the nozzles. Connect the plastic inlet water hose from diverter valve to the first elbow (on the side) and connect the plastic outlet water hose that connects to HomePure 7-Stage to the second elbow (on the center). So, the HomePure Prefilter is now situated between your water source and HomePure 7-Stage. Finish! Open the water diverter valve and start the Flushing process as per HomePure 7-Stage Water Filtration manual. Usage Guidelines Use with municipal tap water. Do not use with water that is microbiologically unsafe. Do not use with water of unknown quality without adequate disinfection before or after the prefilter. Check connection between all parts before use. Flush the Prefilter at time of installation and before using it after a long time. Turn off the valve if prefilter is not going to be used for a long time (for protection from water leak from high water pressure). Turn off the valve if you see a water leak. Change Prefilter regularly to prevent deterioration of water quality. Lifespan of the HomePure Prefilter is 2,600 litres or 6 months, but it varies according to the tap water quality. Use with optimal water pressure (2.4 – 6.8 bar) and temperature (2°C - 38°C). Connect the diverter valve to the faucet. If needed, use one of the three faucet adapters. Insert the other end of the tube to the elbow fitting at the back of the unit until it is properly locked. Cut the plastic inlet hose between diverter valve and HomePure 7-Stage Water Filtration in half or at the proper length depending on your purpose. How to connect the HomePure Prefilter with HomePure Eaze www.homepure.com EASY INSTALLATION KEY BENEFITS Dish Washer Washing Machine Sink or Shower Socket User Friendly Easy and quick one-touch fitting connection and filter change. Safety guarantee Made from NSF-approved materials. Made with polypropylene. Removes suspended solids larger than 5 microns (5/1000 mm) like rust residues, mud and sand; and removes 95% of suspended solids larger than 10 microns. The small pore size sediment prefilter is designed to help increase the clarity of water. Prepares your water for final filtration. Designed for use at the sink, shower or any outlet you choose. Its modern and compact size allows for easy installation – just connect the inlet and outlet and use. Connect one end of the plastic inlet hose to diverter valve. Ensure that the hose is firmly and completely over the valve before securing it with the O-ring, and then tighten the cap. Connect the diverter valve to your faucet or plumbed water supply. Three faucet adaptors are included for your convenience. Remove the cover of the sealed inlet pipe at the bottom of the unit. The HomePure Prefilter can also be used on the following: the HomePure Prefilter! 1 2 3 4 5 6 7 8 2 1 4 3 6 5 8 7 9 Connect the other end of the plastic inlet hose to the inlet pipe and ensure that it is properly secured. Cut the plastic inlet hose between diverter valve and HomePure Eaze in half or at a proper length depending on your purpose. Release the covers of the sealed nozzles. Connect both the ¼ inch elbow fittings to the nozzles. Connect the plastic inlet water hose from diverter valve to the first elbow (on the side) and connect the plastic outlet water hose that connects to HomePure Eaze to the second elbow (on the center). So, the HomePure Prefilter is now situated between your water source and HomePure Eaze. Finish! Open the water diverter valve and start the Flushing process as per HomePure Eaze manual. How to connect the HomePure Prefilter with HomePure 7-Stage Water Filtration System

Transcript of How to Use the HomePure Water Prefilter

Page 1: How to Use the HomePure Water Prefilter

Do rust and dirt from yourwater supply reduce the

performance of your HomePure 7-Stage

Water Filtration System or

HomePure Eaze?

Here’s an excellent solution –

Encapsulated Filter Encapsulated for clean and safe filtration process without contamination from the outside.

Connect the plastic tube to the diverter valve. Tighten the cap.

Release the covers of the sealed nozzles.

Connect both the ¼ inch elbow fittings to the nozzles.

Connect the plastic inlet water hose from diverter valve to the first elbow (on the side) and connect the plastic outlet water hose that connects to HomePure 7-Stage to the second elbow (on the center). So, the HomePure Prefilter is now situated between your water source and HomePure 7-Stage.

Finish! Open the water diverter valve and start the Flushing process as per HomePure 7-Stage Water Filtration manual.

Usage Guidelines

Use with municipal tap water.

Do not use with water that is microbiologically unsafe.

Do not use with water of unknown quality without adequate disinfection before or after the prefilter.

Check connection between all parts before use.

Flush the Prefilter at time of installation and before using it after a long time.

Turn off the valve if prefilter is not going to be used for a long time (for protection from water leak from high water pressure).

Turn off the valve if you see a water leak.

Change Prefilter regularly to prevent deterioration of water quality.

Lifespan of the HomePure Prefilter is 2,600 litres or 6 months, but it varies according to the tap water quality.

Use with optimal water pressure (2.4 – 6.8 bar) and temperature (2°C - 38°C).

Connect the diverter valve to the faucet. If needed, use one of the three faucet adapters.

Insert the other end of the tube to the elbow fitting at the back of the unit until it is properly locked.

Cut the plastic inlet hose between diverter valve and HomePure 7-Stage Water Filtration in half or at the proper length depending on your purpose.

How to connect the HomePure Prefilter

with HomePure Eaze

www.homepure.com

EASY INSTALLATION

KEY BENEFITS

Dish Washer Washing Machine Sink or Shower Socket

User Friendly Easy and quick one-touch fitting connection and filter change.

Safety guarantee Made from NSF-approved materials.

• Made with polypropylene. • Removes suspended solids larger than 5 microns (5/1000 mm) like rust residues, mud and sand; and removes 95% of suspended solids larger than 10 microns.• The small pore size sediment prefilter is designed to help increase the clarity of water.• Prepares your water for final filtration.• Designed for use at the sink, shower or any outlet you choose.• Its modern and compact size allows for easy installation – just connect the inlet and outlet and use.

Connect one end of the plastic inlet hose to diverter valve. Ensure that the hose is firmly and completely over the valve before securing it with the O-ring, and then tighten the cap.

Connect the diverter valve to your faucet or plumbed water supply. Three faucet adaptors are included for your convenience.

Remove the cover of the sealed inlet pipe at the bottom of the unit.

The HomePure Prefilter can also be used on the following:

the HomePure Prefilter!

12

3

45

6

7

8

2

1

4

3

6

5

8

7

9

Connect the other end of the plastic inlet hose to the inlet pipe and ensure that it is properly secured.

Cut the plastic inlet hose between diverter valve and HomePure Eaze in half or at a proper length depending on your purpose.

Release the covers of the sealed nozzles.

Connect both the ¼ inch elbow fittings to the nozzles.

Connect the plastic inlet water hose from diverter valve to the first elbow (on the side) and connect the plastic outlet water hose that connects to HomePure Eaze to the second elbow (on the center). So, the HomePure Prefilter is now situated between your water source and HomePure Eaze.

Finish! Open the water diverter valve and start the Flushing process as per HomePure Eaze manual.

How to connect theHomePure Prefilter

withHomePure 7-Stage

Water Filtration System