How to use the camcorders at the ELTC
-
Upload
david-read -
Category
Technology
-
view
269 -
download
1
Transcript of How to use the camcorders at the ELTC
How to use the Camcorders at the ELTC
A Basic Guide
By David Read
Make sure you book the devices using the online booking system - see this guide if you are not sure how
You need for each camcorder: • the camcorder
(obviously)• USB cable• tripod (optional)
press and hold the silver button on the side to turn it on
You can attach the tripod to the bottom if you need to keep it stable
press to take pictures
press to go back one screen
press to bring up settings menu
you can ignore this
press once to start recording video, press again to stop
when recording/taking pictures, 'w' and 't' are the zoom in and out buttons
when in a menu/selection screen, 'w' and 't' are up and down, the two dots left and right and 'ok' is select
press here to see/play your recorded video/pictures
It's a good idea to go into the settings and check that the Video Resolution is at 480/60p. The quality of the video is reduced slightly but the file size is much smaller
When you have finished recording, you can find your video by pressing the 'play' button to bring up all the videos/pics.
Navigate using the buttons in the centre and then press 'ok' to play.
'play' button
To connect the camcorder to the computer, remove the flap on the side and connect the USB cable
connect the other end of the cable to the USB port on the computer
On the desktop, click on 'my computer' and then
click on 'removable disk'
ignore this click on this
1.
2.
click on 'video' (if you want photographs, click on 'DCIM')
you can select your video from the list
3.