How to Use Cura 15 - Alunar 3D Printer · How to Use Cura 15.04 Note: 1, We advise new user to use...
15
How to Use Cura 15.04 Note: 1, We advise new user to use Cura for Slicing. 2, The datas you will slice depend on the item you need to print. 3, The data we provided (Last page) only for PLA material reference. 4, Before you start printing, please make sure the parts of printer work well and the distance between nozzle and hotbed is about 0.1mm(A4 Paper thickness). Ps: Most datas was default, you need to change them depends on the object you want to print.
Transcript of How to Use Cura 15 - Alunar 3D Printer · How to Use Cura 15.04 Note: 1, We advise new user to use...
How to Use Cura 15.04
Note:1, We advise new user to use Cura for Slicing.2, The datas you will slice depend on the item you need to print.3, The data we provided (Last page) only for PLA material reference.4, Before you start printing, please make sure the parts of printer work well and the distance between nozzle and hotbed is about 0.1mm(A4 Paper thickness).Ps: Most datas was default, you need to change them depends on the object you want to print.
Install Cura
Step 1
Step 2
Step 3
Step 4
Open File
Save as G-code
RotateScale
Mirror
1, Open Cura
2,Change Model
3,Rotate
4,Scale
5,Add new machine
Step 1
Step 2
Step 3
Step 4
6, Machine Setting
Step 1
Step 2Step 3
7,Data Setting
Advanced Settings