How to upgrade R9 VGA driver in WIN8 to upgrade R9 VGA driver in WIN8 Prepare Download R9 VGA driver...
Transcript of How to upgrade R9 VGA driver in WIN8 to upgrade R9 VGA driver in WIN8 Prepare Download R9 VGA driver...
How to upgrade R9 VGA How to upgrade R9 VGA driver in WIN8driver in WIN8
Prepare
Download R9 VGA driver from MSI web as below link:
http://www.msi.com/service/download/driver-21916.htmlr-21916.html
Step 1
You can see the old VGA driver is HD8970M. Click “AMD Catalyst Install Manager” to uninstall old driver.
Step 2
Press “NEXT”
Step 3
Select “Express Uninstall ALL AMD Software” and press “NEXT”
Step 4
Press “OK”
Step 5
Uninstalling Components and please wait few minute.
Step 6
Click “Remove” button
Step 7
Press “Finish” button
Step 8
Press “Yes” to restart your system
Step 9
Old driver has already uninstalled and then
select new driver to install it.
Step 10
Press “Next”
Step 11
Select “install” button
Step 12
Select “Express” and then press “Next”
Step 13
Choose “Accept” option
Step 14
Select “Yes”
Step 15
Step 16
When you see as below picture, press “Finish” and restart the system.
Step 17
After you restart system, go to Device Manager and check VGA device. R9 M290X has been installed.
Thanks forThanks foryour attention