How to strawbale build

23
STRAW BALE BUILD IN 20 STEPS

description

A presentation by ufaFabrik and Trans Europe Halles In this How To you’ll find a slideshow introduction to the inexpensive, energy efficient and sustainable art of building with clay and straw bales. As part of the Engine Room Europe project the Creative Strategies of Sustainabilit embarked on a multitude of smaller projects to find and describe ways of a sustainable culture organisation, the project lead in the project ufaFabrik arranged conferences and prototype cases. This publication is the result of the latter. The 20 image slide show is a quick and dirty introduction to the art of straw bale building, for more input watch the highly inspiring build of a new venue in Stanica also on the resource. A special thanks to Sigrid Niemer for overall coordination and help and to Maria Garcia and Werner Wiartalla for their expert advice and to ufaFabrik for the photographs. The slideshow was compiled by Sandy Fitzgerald and design was done by Ludvig Duregård for the Trans Europe Halles Resource.

Transcript of How to strawbale build

Page 1: How to strawbale build

STRAW BALE BUILDIN 20 STEPS

Page 2: How to strawbale build

A TRANS EUROPE HALLES RESOURCE AND UFAFABRIK PUBLICATIONA CASE STUDY FROM ufaFABRIK (BERLIN, GERMANY)

Page 3: How to strawbale build

1. Digging out foundations

Page 4: How to strawbale build

2. Making foundation shuttering

Page 5: How to strawbale build

3. Make and drop in shuttering boxes and steel reinforcement

Page 6: How to strawbale build

4. Fill holes with concrete

Page 7: How to strawbale build

5. Foundations are ready for building

Page 8: How to strawbale build

6. Making frames

Page 9: How to strawbale build

7. Preparing the straw

Page 10: How to strawbale build

8. Filling the frames

Page 11: How to strawbale build

9. Making sure the bales are a tight fit

Page 12: How to strawbale build

10. Mixing the clay

Page 13: How to strawbale build

11. Applying the clay

Page 14: How to strawbale build

12. Duplicate the frames

Page 15: How to strawbale build

13. Laying the floor

Page 16: How to strawbale build

14. Installing the walls

Page 17: How to strawbale build

15. PLASTERING

Page 18: How to strawbale build

16. It begins to take shape

Page 19: How to strawbale build

17. Taking shape

Page 20: How to strawbale build

18. Putting the roof on

Page 21: How to strawbale build

19. Nearly there

Page 22: How to strawbale build

Finished!

Page 23: How to strawbale build

CREDITS

This slideshow is a result of the CSOS (Creative Strategies Of Sustainability) programme, supported by the Engine Room Europe project of Trans Europe Halles and led by ufaFabrik, Berlin.

A special thanks to Sigrid Niemer for overall coordination and help and to Maria Garcia and Werner Wiartalla for their expert advice and to ufaFabrik for the photographs.

Note: This slideshow is meant as an inspiration and a guide. It is highly recommended that if you want to embark on a straw bale building you seek the advice of experts e.g. friendly structural engineers or architects.

Trans Europe Halles and ufaFabrik, their agents, funders, workers and supporters, accept no responsi-bility for any injury OR damage that may occur as a result of any construction undertaken related to this slide show.

FOR MORE INSPIRING CASES VISIT www.teh.net

This publication [communication] reflects the views only of the author, and the Commission cannot be held responsible for any use which may be made of the information contained therein.