How to simulate using PSPICE at Uconn ECEmam10069/Docs/PSPICE Tutorial.pdf · C L_E]...
-
Upload
nguyencong -
Category
Documents
-
view
260 -
download
3
Transcript of How to simulate using PSPICE at Uconn ECEmam10069/Docs/PSPICE Tutorial.pdf · C L_E]...
How to simulate using PSPICE at Uconn ECE
Anas Mazady
1. Go to skybox.uconn.edu and install the software
2. Run the software. Type view.vpc.uconn.edu in the connection server field. Click Connect.
3. Choose ENGR_STUDENT from the domain list. Login using your Net ID and password. Click Connect in
the next screen.
4. Once logged in to the Skybox desktop, click start > CAD > Cadence > Release 16.5. Click
OrCAD Capture CIS.
5. Choose Allergo PCB Design CIS L from the list and click OK
6. Create a new project
7. Choose the radio button Analog or Mixed A/D. Name the project and browse to your network
directory h:// where you want to save the simulations.
8. Choose the radio button Create based upon an existing project and click OK.
9. Double click the schematic file from the File tree.
10. Go to Place > Part
Add Component Library
The libraries that you would mostly need include: analog.olb, source.olb, bipolar.olb,
jfet.olb, drlngtn.olb etc.
Simulating Your Circuit and Final Output
1. Finish drawing the circuit. Make sure you specify the ground node of your circuit. Simulate using the “Play
button”.
2. In the plot window click Tools > Options and change the background color from black to white or some
light color.
3. Add traces to your plot and you should have nice figures ready to be printed out. Print your results by
clicking File > Print.