How to set up a pa system
-
Upload
thehornyrhino -
Category
Business
-
view
462 -
download
10
Transcript of How to set up a pa system
How to set up a PA system.. Jessica Collins
What will I need?• 2 Active Speakers
• Sound Desk
• Figure of 8 lead
•Phono with ¼ inch jack, extension jack.
• 3 Kettle Leads
•2 XLR cables
• CD player
• Extension lead.
Plug extension lead into power.
Plug kettle lead into desk.
And into the extension lead.
Plug the kettle lead into speaker.
Repeat on the left.
Plug XLR cable from speaker into the desk.
Repeat with left.
Plug figure of 8 into CD player then into extension lead.
Plug the phono into CD player then into desk.
Turn desk on.
Turn speakers on.
Turn CD player on.
Start the music.
Turn the PFL on and adjust the gain so that the monitor is on yellow, keep it out of the red.
Turn channel on.
Pan left all the way to the left and right all the way to the right to create a stereo sound.
Turn up the master volume.
Turn individual volume up.
The End