How to Root the Cherry Mobile Omega HD 2.0
-
Upload
randolph-novino -
Category
Self Improvement
-
view
17.855 -
download
2
description
Transcript of How to Root the Cherry Mobile Omega HD 2.0
HOW TO ROOT THE CHERRY MOBILE OMEGA HD 2.0
QUADCORE SMARTPHONE TUTORIAL BROUGHT TO YOU BY @PINOYSCREENCAST
SUBSCRIBE AT HTTP://YOUTUBE.COM/PINOYSCREENCAST FOR MORE TIPS AND TRICKS
-------------------------------------------------------------------------------------------------------------------------- STOCK RECOVERY
http://www.4shared.com/zip/iY_sNZ2d/H120_recovery_utc130426-041259.html --------------------------------------------------------------------------------------------------------------------------
Download and extract the MtkDroidTools_v246.exe
http://dfiles.ru/files/83edkfpic
Download and extract the zip file SP_Flash_Tool_v3.1304.0.119 http://www.4shared.com/zip/qphG6aQy/SP_Flash_Tool_v313040119.html
Download the Scatter File for Cherry Mobile Omega HD 2.0 http://www.4shared.com/office/VSDzlw4S/MT6589_Android_scatter_emmc.html
Download the CWMR Recovery
http://www.4shared.com/zip/RSn97wX4/H120_130426__recovery_130528-0.html
Activate the Developers Option in Jelly Bean 4.2
Check the Developers Option > USB Debugging
Press this 5 times to activate the Developers Option
Check the Security > Unknown Sources
and then insert your USB Cable to your Phone
Download and Install the Android Driver for Windows http://www.4shared.com/zip/82FSagnQ/usb_driver_r07-windows.html
Installing the Driver Once Downloaded goto Device Manager
and you will see that the driver is not installed properly
then browse the driver on your computer the one you have downloaded awhile ago
choose the location of the and press ok
Choose show all devices
Choose Android _wiznusb.inf
choose Have disk
Choose Android ADB Interface
Update driver
if successfully installed you must see the Android ADB Interface on your device manager
Next is you need to open the SP Flash Tool and run as administrator
click the Scatter-loading then look for the file MT6589_Android_scatter_emmc.txt that you have downloaded awhile ago and uncheck all the names except for the recovery
and click the recovery and look for the H120_130426__recovery_130528-005823.img that you have downloaded a while ago
next is to turn off your phone and remove the battery , then click the Download button and put back the battery and USB cable into the phone and wait for it to finish loading .
if successfully flashed you will see a green mark circle.
Now open the MTKdroidTools.exe run as administrator
then shutdown your phone the boot to recovery by pressing volume up + power button at the same time
then going back to the MTK Droid Tools
you will notice that the indicator is now color mint blue
and the SuperUser is activated click that button and you will see it will prompt you to choose either SuperSU or SuperUser
I recommend using the SuperSu for this unit because when I tested out the SuperUser it had some issues.
if successfully installed you will the status on the right side
now reboot your phone and download the root checker to check if your phone is already rooted
if in case it showed up that your phone is not yet rooted proceed with this next step if note ignore the remaining procedures
reboot your phone to normal mode
and open again the MTK Droid Tools
you will see that it has found that it installed the SU now press the ROOT button
then press yes and wait for it to finish it task
after that check again if it is now rooted
ENJOY!
TROUBLESHOOTING
• try to download the titanium backup and it must prompt the root access permission if not try to open first the SuperSU app on your phone and then if it prompts you to reboot , try to reboot it.
• also be sure that after you reboot it will show ANDROID IS UPGRADING.