How to Resolve the issue of Canon Printer Error Code e17?
-
Upload
benpatrick -
Category
Technology
-
view
15 -
download
0
description
Transcript of How to Resolve the issue of Canon Printer Error Code e17?
How toResolve theissue of CanonPrinter ErrorCode e17?
WHAT IS CANON PRINTER ERROR CODEE17?
Whenever Canon Printer Error Code e17 appears in
your printer, the orange light on the printer flashes
continuously. The number of times the LED blinks
indicates the type of error you are experiencing. You
must count the flash to take action accordingly.
Mainly, this error is known as blinking orange error 3
times. Each time this error code appears, the orange
LED blinks three times. This means that the front tray
or the front feed bracket is closed. Sometimes a
paper jam can also cause you such errors.
WAYS TO SOLVE CANONPRINTER ERROR CODE E17.
Mostly this error canon printer error code e17 appears because the front trayblocked or not opened. It would be best if you opened the Front tray to resumeyour printing process.
The error may also appear when the front feed support is closed with printingfrom the front tray, first open it thus press the Resume or Cancel button onyour Canon printer.
Check for any paper jam; it is better to remove and clean all paper jams, forthat open the Front tray and Front Feed Support once you have to done reloadpapers in your Canon printer and then press Resume or the Cancel button.If you are unable to solve the problem with steps, try resetting the printers,Follow the below steps to reset your printer.
Open the Front Tray
Check out the Front Feed Support
Remove All Paper Jam if any.
STEPS TO RESET CANONPRINTER ERROR E17If you are unable to solve the problem with the above method, thenfollow the below steps to rest your printer, resetting the printer willsolve all the complicated problem.First of all turn off your Canon PrinterThen press the hold the Stop buttonAfter that press and hold Power On button.Just remember to release the Stop button when you press the PowerOn button.Now press twice the Stop button while holding yet the Power-OnbuttonThen release the Power ON buttonWait until it displays an idle message, It will take a few seconds.
VISIT US:FOR MORE VISIT: CLICK HERE ..!!..
We hope you find our solutions and suggestions useful. You can alsocomment in the comments section about your experience with the
Canon Printer Error Code e17 . For more technology-related articles,keep following our next articles.
THANK YOU