How to Read Guitar TabsFour Parts: Using Tabs to Fret Notes and Chords Reading Special Symbols Reading an Example Tab

Guitar Tab Cheat Sheets

Guitarists have their own special system of music notation called guitartablature, or "guitar tabs" for short. Using guitar tabs, a guitarist can play a widevariety of music without ever having to learn how to read standard sheet music.Though guitar tabs aren't a perfect way of describing music, they've allowednewer generations of guitarists to quickly and easily share information abouthow to play songs across the globe via the internet. Every guitarist should haveat least a basic understanding of how to read tablature - it's the de-factoshorthand for much of the guitar music you'll find written out online.

Online LessonsFor Guitar, Mandolin & BassInteract with Our Artists

1

Ad

2

View tab notation as a representation of the guitar's strings. A tab is usuallywritten using six horizontal lines, each corresponding with a string on the guitar.

The bottom line represents the lowest, thickest string, while the top string represents thehighest, thinnest string. For standard tunings, this means that the lines will represent,from the bottom up, the low E, A, D, G, B and high E strings.

E----------------------------||(Thinnest string)

B----------------------------||

G----------------------------||

D----------------------------||

A----------------------------||

E----------------------------||(Thickest string)

Use the numbers on the tab to fret spaces on the neck. Unlike normal musicalnotation, guitar tabs don't tell you which notes to play. Instead, they tell you where

to put your fingers. Numbers on the lines correspond to frets on the fretboard. Eachnumber represents a specific fret on the line it's written on. For instance, a "1" on thebottom line means to fret the first fret of the lowest string and play that note.

Online LessonsFor Guitar, Mandolin & BassInteract with Our Artists

Part 1 of 3: Using Tabs to Fret Notes and Chords

3

4

5

If the number is greater than 0, (1, 2, 3, 4, etc), then press your finger on thatfret when you play, with "1" being the fret closest to the stock and fret numbersincreasing as you move towards the guitar's body. If the number is 0, then pluckthe open string without fretting any notes.

Play vertically stacked numbers at the same time. When reading tabs, manytimes, you'll come across numbers that are aligned vertically. These are chords.

Fret every note in the chord as written, then play the notes all at the same time. You'llget a fuller sound than You might see the chord name written as well. See Example 2below.

Proceed from left to right. Tabs are read like sentences in a book - read them

from left to right, across the page, dropping down to the next line only when you'vereached the end of the previous. Play the notes and chords in sequence as you readthem from left to right.

Note that most (but not all) tabs don't display the rhythm with which you shouldplay the notes in the tab. They may break the tab into measures (usuallysignified by vertical lines in the tab between measures, but they won't tell youthe rhythm of the notes within the measures. In this case, it's best to listen to thesong while you read the tab to find the beat.Some advanced tabs do count out the beat for you - this is usually done byincluding rhythmic markings along the top of the tab notation. Each marking isvertically aligned with a note or a rest to give a sense of how long the note orrest lasts. Typical rhythmic markings include:

w = whole note h = half note q = quarter note. e = eighth note. s =sixteenth note. Sometimes & markings are included to show that a noteor rest lies on the "and" of a certain beat.A dot after the rhythm marking means the corresponding note or rest isdotted. For instance, q. = dotted quarter note.For rhythm basics, see How to Read Music

Look for lyrics or chord changes. Many songs have guitar parts made up solely(or mostly) of chords. This is especially true for rhythm guitar parts. In this case,

the tab may forgo typical tab notation in favor of a simplified list of chord changes. Thesechords are almost always written in standard chord notation (Amin = A minor, E7 = Edominant 7, etc.) Simply play the chords in the order that they're listed - if it's not notedotherwise, try playing one chord per measure, but if the changes don't sound right, listento the song for the strumming pattern.

Sometimes, these chord changes are printed above the lyrics of the song togive you a sense of when these chords are played, as in this snippet from a tabfor The Beatles' "Twist and Shout:"(A7)...................(D)...............(G)............(A)Well shake it up baby, now (shake it up baby)

Part 2 of 3: Reading Special Symbols

1

2

3

4

5

6

Look for additional symbols in the tab. As you can see in the example above,many tabs aren't just collections of lines and notes. Tabs use a wide variety of

special symbols to tell you how to play the notes in the tab. Most symbols refer tospecific playing techniques - to make a song sound as much like the recording aspossible, pay attention to these special markings.

Learn the symbol for Hammer ons. In a tab, an "h" inserted between two notes(e.g. 7h9) means to perform a hammer on. To hammer on, play the first note

normally, then use a finger on your fretting hand to tap down on the second note withoutusing your strumming hand to pluck the note.

Sometimes "^" is used instead (e.g. 7^9).

Learn the symbol for Pull offs. - A "p" inserted between two notes (e.g. 9p7)means to perform a pull off, which is essentially the opposite of a hammer on.

Pluck the first note while using another finger to fret the second note. Then, quickly liftthe finger fretting the first note. The second note will sound.

As with hammer ons, sometimes "^" is used instead (e.g. 9^7). In this case,know to perform a pull off if the second note is lower and a hammer on if thesecond note is higher.

Learn the symbol for string bends. If a "b" is inserted between two fret numbers(e.g. 7b9), fret the first note and bend it up until it sounds like the second.

Sometimes the second number is in parentheses, and occasionally the "b" isomitted altogether. If there is an "r" it denotes what the note should be releasedto (e.g. 7b9r7).

Learn the symbols for slide techniques. Perform a basic slide by striking a note,moving your finger up or down a string without releasing it from the fretboard, then

striking another note. An ascending slide is marked by a forward slash "/" and adescending slide is marked by a backwards slash "\" (e.g. 7/9\7).

A lowercase "s" usually means to perform a legato slide. This is like a normalslide, but you only strike the first note with your pick. Let your target note soundsimply from the motion in your fret hand.

There is debate among guitarists over whether a light pick strike isappropriate for the target note. The most important thing is toremember to leave no gap between notes.

Shift slides are signified by an uppercase "S." In this case, strike the target notewithout striking the initial note of the slide.

Learn the symbols for tremolo bar techniques. If your guitar has a tremolo bar,(also known as a "whammy bar" or "vibrato bar") follow these symbols to achieve

some remarkably out-there effects.

If you see a "\n/," where n = some number, perform a tremolo bar dip. Quicklyhit and release the bar to dip the note's pitch. The number between the slashesgives an indication of the pitch you should dip to - dip the pitch by "n" semitones

7

8

9

10

(a semitone is the same as the pitch between two adjacent frets.)[1] Forinstance, "\5/" means to drop the pitch by 5 semitones, which will be the sametone as 5 frets below the original note.If you see a "\n," where n = some number, fret note "n," then strike it anddepress the tremolo bar deeply to dramatically drop the pitch.If you see "n/," raise the tremolo bar up after striking note "n" to raise the pitch.On some guitars, you can also put your bar in "inverted" position first so thathitting the bar raises the pitch rather than lowers it.If you see "/n\," perform a tremolo bar inverted dip by first depressing thetremolo bar, then raising it. As above, this also works in inverted position.

Learn the symbol for vibrato. Look for "~" or "v". If you see these symbols,perform vibrato on the preceding note. Strike the note, then use your fretting hand

to rapidly bend and unbend the string, vibrating the pitch of the note.

Learn the symbols for muting techniques. Several tab symbols indicatedifferent methods for giving notes a "muted" sound.

If you see an "x" or a dot below the number, mute the string. Lay your frettinghand finger(s) across the designated strings so that when you strike them theyproduce a dull, clicking sound. Several "x" in a row, on adjacent strings,indicates a rake - just mute more than one string at once.If you see "PM," play using palm muting. For standard right-handed guitarplaying, gently lay the edge of your right palm across the strings near theguitar's bridge. When you strike the notes (with the same hand as is providingthe mute), you should hear the tone of the note, but with a subdued, deadquality. Move your hand slightly up the strings toward the neck to deaden thenotes more.

Learn the symbol for tapping. Tapping is usually represented by a "t." If you seea "t" in a string of notes, (e.g. 2h5t12p5p2) use one of the fingers on your picking

hand (usually your right hand) to tap down hard on the indicated fret. This is a usefultechnique for making very rapid, fast changes in pitch.

Learn the symbols for harmonic techniques. Guitar tabs differentiatebetween several different techniques for playing harmonics - bell-like tones

created by special fretting techniques.

For natural harmonics, the fret is surrounded by "< >" (e.g. <7>). If you see this,lay a fretting finger across the metal line at the right of the fret, not the middle ofthe fret. Then, strike the string for a clear bell tone.Pinch harmonics are signified by surrounding the fret number in brackets (e.g.[n]). To perform a pinch harmonic, strike the note with your pick hand while yourpick hand thumb is also touching the note. Use vibrato from your fret hand toadd sustain to the tone.[2] Pinch harmonics are difficult. It requires lots ofpractice.

Note: these are best performed on an electric guitar with distortionusing a bridge pickup.

Tapped harmonics are signified by two notes, the second enclosed inparentheses (e.g. n(n)). Tapped harmonics are like natural harmonics, butshifted around the neck. Fret the first note, then use a finger on your pick handto slap or strike the string at the second fret position.

11

12

Learn the symbol for trills. When you see a "tr" written in or above the tab, it'susually between (or above) two notes. Often, it's accompanied by a string of

tildes ("~'s.") This simply means to strike the first note, then rapidly hammer on to thesecond note and pull off to the first note again and again.

Learn the symbol for tremolo picking. "TP" means you should tremolo pickthe note - essentially, pick the single note over and over as rapidly as you can.

Sometimes, a TP symbol is followed by a string of tildes or dashes to give you a senseof how long to tremolo pick.

1

2

3

Glance over the tab below. Notice that it shows several three-note chords as wellas some individual notes descending on the higher strings. In the following steps,

we'll walk through this tab beat-by-beat.

E---------------3-0--------------------||

B-------------------3-0----------------||

G---7-7-7---------------2-0------------||

D-2-7-7-7-7-7-7------------------------||

A-2-5-5-5-7-7-7------------------------||

E-0-------5-5-5------------------------||

Start with the chord at the far left. In this case, first you would play a powerchord in E (Middle finger/Finger 2 on the second fret on the A string, ring

finger/Finger 3 on the second fret on the D string, and no finger on the low E string)strumming those first 3 strings (E,A,D) once. Play the chord highlighted withparentheses below:

E-------------3-0-----------------||

B----------------3-0--------------||

G-----777-----------2-0-----------||

D-(2)-777--777--------------------||

A-(2)-555--777--------------------||

E-(0)------555--------------------||

Proceed to the next two chords. The next chord you would play would be apower chord on the fifth fret of A three times. So you would play with your index

finger on the fifth fret of A, your middle finger on the seventh fret of D, and your ringfinger on the seventh fret of G. Then, simply shift this finger shape down one string sothat your index finger is on the fifth fret of the E string with your other fingers on theseventh frets of the A and D strings. Play the chords in the sequence that they'rehighlighted with parentheses below:

E-------------3-0-----------------||

Part 3 of 3: Reading an Example Tab

4

B----------------3-0--------------||

G----(7)77-----------2-0----------||

D-2--(7)77--777-------------------||

A-2--(5)55--777-------------------||

E-0---------555-------------------||

E---------------3-0---------------||

B------------------3-0------------||

G----7(7)7------------2-0---------||

D-2--7(7)7--777-------------------||

A-2--5(5)5--777-------------------||

E-0---------555-------------------||

E---------------3-0---------------||

B------------------3-0------------||

G----77(7)------------2-0---------||

D-2--77(7)--777-------------------||

A-2--55(5)--777-------------------||

E-0---------555-------------------||

E---------------3-0---------------||

B------------------3-0------------||

G----777--------------2-0---------||

D-2--777--(7)77-------------------||

A-2--555--(7)77-------------------||

E-0-------(5)55-------------------||

E---------------3-0---------------||

B------------------3-0------------||

G----777--------------2-0---------||

D-2--777--7(7)7-------------------||

A-2--555--7(7)7-------------------||

E-0-------5(5)5-------------------||

E---------------3-0---------------||

B------------------3-0------------||

G----777--------------2-0---------||

D-2--777--77(7)-------------------||

A-2--555--77(7)-------------------||

E-0-------55(5)-------------------||

Play the individual notes at the right. After the first 3 chords in the example,proceed to the right and play the single notes. Put any finger on the third fret of the

high E string, pluck once, then play the open high E string, and so on through the sixdescending notes. Play the notes below in the order they're highlighted in parentheses:

E---------------(3)-0-------------------||

B--------------------3-0----------------||

G---7-7-7----------------2-0------------||

D-2-7-7-7-7-7-7-------------------------||

A-2-5-5-5-7-7-7-------------------------||

E-0-------5-5-5-------------------------||

E---------------3-(0)-------------------||

B--------------------3-0----------------||

G---7-7-7----------------2-0------------||

D-2-7-7-7-7-7-7-------------------------||

A-2-5-5-5-7-7-7-------------------------||

5

E-0-------5-5-5-------------------------||

E---------------3-0---------------------||

B--------------------(3)-0--------------||

G---7-7-7------------------2-0----------||

D-2-7-7-7-7-7-7-------------------------||

A-2-5-5-5-7-7-7-------------------------||

E-0-------5-5-5-------------------------||

E---------------3-0---------------------||

B--------------------3-(0)--------------||

G---7-7-7------------------2-0----------||

D-2-7-7-7-7-7-7-------------------------||

A-2-5-5-5-7-7-7-------------------------||

E-0-------5-5-5-------------------------||

E---------------3-0---------------------||

B--------------------3-0----------------||

G---7-7-7----------------(2)-0----------||

D-2-7-7-7-7-7-7-------------------------||

A-2-5-5-5-7-7-7-------------------------||

E-0-------5-5-5-------------------------||

E---------------3-0---------------------||

B--------------------3-0----------------||

G---7-7-7----------------2-(0)----------||

D-2-7-7-7-7-7-7-------------------------||

A-2-5-5-5-7-7-7-------------------------||

E-0-------5-5-5-------------------------||

Put it all together. Play the chords and notes from left to right without stopping.Tap your foot, playing each note or chord on each tap of your foot. Work slowly and

carefully, only increasing your speed once you've mastered playing the tab slowly.

Sample Guitar Tab Terms Guitar Tab Cheat Sheet

Guitar Tab Cheat Sheets

Can you tell us about

wakeskating?Can you tell us about

mind hacks?Can you tell us about

home hacks?Can you tell us about

AdobePhotoshop?

Ad

Ad

Start off with reading guitar tabs for simple songs that you've alreadyheard, so you know what they're supposed to sound like.Read all tablature carefully. Some people have special symbols forslides, bends, pull-offs, and the like. However, they will usually tell youat the top of a page.Some chord shapes may be awkward at first. Try finding a way ofgrabbing the chord that is comfortable and easy for you.

RefreshSettingsSign in with your Twitter account

Hãy xem ngay kinhnghiệm giúp giảm đauthắt ngực hiệu quả 90% Tìm hiểu Thêm

Kinh nghiệm trị nhồi máu cơ tim

Some tabs on the internet are user submitted and aren't alwaysaccurate.Many tab sites on the internet use artists' works without permission.Using a legal tab site (such as MxTabs.net or GuitarWorld.com) ensuresthat the tabs you are using are hosted with the artists' permission. Theartists often work out deals with the sites to get part of the ad revenue.Guitar tab will not aid you in the process of learning and understandingmusic theory, as it only tells you where to position your fingers. In manyprinted books you may see guitar tab alongside standard notation.

We could really use your help!

Tips

Warnings

Yes No Yes No Yes No Yes No

1. ↑ http://f-guitar.com/index.php/rock-guitar-lessons/77-rock-guitar-lesson-8-how-to-use-whammy-bar

2. ↑ http://www.ultimate-guitar.com/lessons/guitar_techniques/make_your_guitar_scream_natural_and_artificial_harmonics.html

While useful for guitarists of any experience level, guitar tab is perfectfor the casual player.One of the major shortcomings of guitar tabs is that they don't tell youexactly when to play the notes. If you're having a hard time playing themusic to a good rhythm, try another piece or consider learning to readstandard music notation.Some musicians don't want their works published without permission,so be careful with what you write and post on the internet.In addition to providing no rhythmic information, tabs are also limitedcompared to standard music notation in that they don't communicatemusical information such as chord voicing, separating melody fromaccompaniment, showing melodic contour, or any other intricate musicaldetail.

A guitar

A pick (optional)

1. ↑ http://f-guitar.com/index.php/rock-guitar-lessons/77-rock-guitar-lesson-8-how-to-use-whammy-bar

2. ↑ http://www.ultimate-guitar.com/lessons/guitar_techniques/make_your_guitar_scream_natural_and_artificial_harmonics.html

FeaturedArticle

Categories: Featured Articles | Guitar Chords and Songs

In other languages:

Español: Cómo leer acordes de guitarra, Italiano: Come Leggere Tablature perChitarra, Português: Como Ler Tablaturas de Guitarra, Deutsch: Gitarren Tabs

Things You'll Need

Sources and Citations

Sources and Citations

Article Info

Thanks to all authors for creating a page that has been read 931,666 times.

lesen, Français: Comment lire une tablature de guitare, Русский: читать гитарнуютабулатуру, Nederlands: Gitaartabs leren lezen en spelen, BahasaIndonesia: Membaca Tab Gitar, 中⽂文: 看懂吉他谱