How to Measure

Grading Worksheet

How to Measure GuideSpecID Design

Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:

Season: Initial 0000

How to Measure Guide

At midpoint of back armhole measure straight acrossback from seam to seam (edge to edge if sleeveless).

AB01 Across Back 5" from HPSAt midpoint of front armhole measuare sraight acrosschest from seam to seam (edge to edge if sleeveless).

AC01 Across Chest 5" from HPSMeasure at seam (edge if sleeveless) following curve ofarmhole (circum).

AH01 Armhole Following CurveMeasure straight from top of armhole to underarm seam(1/2 circum).

AH02 Armhole Straight

Measure from front strap edge to underarm seamfollowing curve of armhole.

AH03 Armhole Front- From Strap JoinMeasure from front neck seam /edge or top of armhole tounderarm seam following curve of armhole.

AH04 Armhole FrontMeasure from back neck seam /edge or top of armholeto underarm seam following curve of armhole.

AH05 Armhole BackMeasure straight from high point shoulder (HPS) toimaginary line perpendicular to underarm/side seamintersection.

AH06 Armhole Depth

Printed: 04 JAN 2010 09:31 PM Copyright Swiss Colony 20091_WARPAML.rptHowtoMeasure4 (W: 6.0.1032, PJ: 6.0.1032.0)

of 27

Measure straight the specified distance from CenterFront (CF)horizontally to the closest edge of the squaredoff artwork.

AP01 Artwork Placement from CF - HorizontalMeasure straight the specified distance from CenterBack (CB) horizontally to the closest edge of the squaredoff artwork.

AP02 Artwork Placement from CB-HorizontalMeasure straight the specified distance from High PointShoulder (HPS) vertically to the top edge of the squared offartwork.

AP03 Artwork Placement from HPS-Vertical

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:



Measure straight the specified distance from Side Seam(SS) horizontally to the closest edge of the squared offartwork.

AP04 Artwork Placement from SS-Horizontal

Measure straight the specified distance from bottom hemvertical to the closest edge of the squared off artwork.

AP05 Artwork Placement from Bottom Hem-VerticalMeasure straight the specified distance from sleeve hemvertical to the closest edge of the squared off artwork.

AP06 Artwork Placement from Sleeve Hem-VerticalMeasure bust/chest 1” down from armhole seam straightacross from edge to edge (circum).

BC01 Bust/Chest 1" below ArmholeMeasure bust/chest at armhole seam straight acrossfrom edge to edge (circum).

BC02 Bust/Chest @ Armhole


of 27

Measure bust/chest at specified distance down from highpoint shoulder (HPS) straight across from edge to edge(circum).

BC03 Bust/Chest @ spcfd. Location from HPSMeasure back panel at armhole seam straight acrossfrom edge to edge.

BC04 Back Bust @ Armhole BC05 Bust Chest Folded

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:



Measure belt straight across from edge to edge.BE01 Belt Width

Measure belt straight from end to end, including allhardware.

BE02 Belt Length-TotalMeasure belt loop width from edge to edge.BE03 Belt Loop Width

Measure belt loop height from top edge to bottom edge,does not include turnunder.

BE04 Belt Loop HeightMeasure straight down from HPS to center of belt loop.BE05 Belt Loop Placement From HPS


of 27

Measure belt straight from seam to end, including allhardware.

BE06 Side Tie LengthMeasure band straight from seam to edge.BH01 Band Height

Measure band height straight from seam to seam.BH02 Band Height (Waist, Top)

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:



Measure band height straight from seam to edge.BH03 Band Height (Sweep, Top)

Measure band height straight from seam to edge.BH04 Band Height (Armhole)

Measure band height straight from seam to edge.BH05 Band Height (Sleeve Opening)

Measure band straight from seam to edge.BH06 Band Height (Leg Opening)

Measure band height straight from seam to edge. Bandcan be on pocket or flap.

BH07 Band Height (Pocket)


of 27

Measure straight from imaginary line at high pointshoulder (HPS) to center of button at chest.

BT01 Button plcmnt from HPSMeasure from bottom edge to center of last button.BT02 Last Button Placement from Bottom Edge

Measure cuff straight from edge to edge.CF01 Cuff Height

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:



Measure from front bodice point down the front tofinished bottomedge.

CM01 Cami Body Length - Front

Measure from back bodice point down the front tofinished bottomedge.

CM02 Cami Body Length - BackMeasure from front bodice point down the front tofinished bottomedge.

CM03 Cami Dress Body Length - FrontMeasure from back bodice point down the front tofinished bottomedge.

CM04 Cami Dress Body Length - BackFold cami at center back (CB) and center front (CF) withside seams (SS) matching. Measure from CF fold, levelwith top of SS to CB. An imaginary line may be requiredif back is lower than SS. Back elastic should beextended. (circumference)

CM05 Cami Bust CF to CB (circum)


of 27

Fold cami at center back (CB) and center front (CF) withside seams (SS) matching. Measure from CF fold, levelwith top of SS to SS. (full front panel width)

CM06 Cami Front Bust - CF to SS (full panel)Fold cami at center back (CB) and center front (CF) withside seams (SS) matching. Measure from CB foldstraight across bottom edge to CF fold. (circumference)

CM07 Cami Sweep - CB to CF (circum)Measure straight at center back from neck seam to collarset seam.

CO01 Collar Band Height

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:



Measure straight at center back collar from neck seam tocollar edge.

CO02 Collar Height @ CB

With collar open, measure along edge from point topoint.

CO03 Collar Length @ edgeMeasure straight along edge from collar point to lapelseam or neck seam.

CO04 Collar PointMeasure straight along edge from lapel notch to lapelpoint.

CO05 Lapel PointMeasure along body join at neck from notch of collararound to notchof collar.

CO06 Collar Length @ Join Seam


of 27

Measure straight from point to point across frontopening.

CO07 Collar SpreadMeasure from lapel edge to collar seam, forming aperpendicular line to collar seam.

CO08 Lapel WidthMeasure dart depth at widest point from dart seam toedge of dart fold (double measurement).

DD01 Dart Depth

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:



Measure drawstring straight fully extended from exposedend to center of back waistband (circum).

DR01 Full Drawstring Length

Fold hood at center back, keeping front edges together.Measure along extended hood opening and add exposeddrawstring length.(full length)

DR02 Drawstring Length - HoodMeasure straight down from high point shoulder (HPS) todart point.

DT01 Dart Placement from HPSMeasure straight down from armhole to dart seam.DT02 Dart Placement below Armhole

Measure at waist from dart to center front (CF).DT03 Dart Placement from CF @ Waist


of 27

Measure at waist from dart to center back (CB).DT04 Dart Placement from CB @ Waist

Measure along the length of the dart.DT05 Bust Dart Length

Measure along the length of the dart.DT06 Waist Dart Length

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:



Determine center back(CB) placement. Measurestraightthe specified distance from neck seam edge at center back toshoulder to elbow at center fold.

EB01 Elbow Placement

Measure elbow at specified location down from CB.(circumference)

EB02 Elbow @ Specified LocationMeasure bust/chest 1” down from armhole seam straightacross fromedge to edge (flat).

FB01 Bust/Chest 1" below Armhole (flat)a)Sweep – Straight Measure straight acrossbottom from edge to edge (flat). b) Sweep - Following Curve Edge to Edge Measure following curve across bottom from edge toedge (flat).

FE01 Sweep (Top,Flat)Measure hip at specified distance down from high pointshoulder (HPS)straight across from edge to edge (flat).

FH01 Hip (flat)


of 27

Measure straight across sleeve opening from outsideedge to outside edge (flat).

FS01 Sleeve Opening - Flat (Short)Measure straight across sleeve opening from outsideedge to outside edge (flat).

FS02 Sleeve Opening - Flat (Elbow)Measure straight across sleeve opening from outsideedge to outside edge (flat).

FS03 Sleeve Opening - Flat (Long)

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:



Measure straight 1” down from armhole seam straightacross from edge to edge (flat).

FU01 Upperarm 1" Blw Armhole (flat)

Measure waist at specified distance down from HPS (a),CB-neck (b) or down from armhole (c) straight acrossfrom edge to edge (flat).

FW01 Waist @ Specified Location (Flat)Measure from back neck join seam to center front (CF)neck following curve of neckline.

HA01 Halter Neck - Back to FrontMeasure from side seam (SS) to back neck join seam,following curve of armhole.

HA02 Halter ArmholeMeasure specified distance from waistband seamfollowing side edges and center front. Measure from sideseam to center front, pivot to other side edge (circum).

HB01 High Hip (bottom)


of 27

Measure specified distance from waistband seamfollowing side edges and center front. Measure from sideseam to center front, pivot to other side edge (circum).

HB02 Low Hip (bottom)Fold hood at center back,keeping front edges together.Measure opening along edge, from top edge to neck-lineseam. (circumference)

HO01 Hood OpeningFold hood at center back,keeping front edges together.Measureheight at the tallest point of the hood, from top edgetonecklineseam.

HO02 Hood Height @ Tallest Point

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:



Fold hood at center back,keeping front edges together.Measurewidth at widest point, from front edge to CB fold to frontedge.

HO03 Hood Width @ Widest Point

Measure hip at specified distance down from high pointshoulder (HPS) straight across from edge to edge(circum).

HT01 High Hip @ spec. location (top)Measure straight from crotch seam to leg opening.IN01 Inseam

For garment with waistband measure straight fromwaistband seam to bottom of fly “J” stitch.For garment without waistband measure straight fromtop edge of garment to bottom of fly “J” stitch.

JS01 "J"Stitch LengthMeasure straight from edge to outer stitch.JS02 "J"Stitch Width


of 27

Lay flat, seam to seam. Measure the specified distancebelow crotch seam along inseam.

KN01 Knee Placement down from CrotchLay flat, seam to seam. Measure width at specifiedplacement, from edge to edge. (circumference)

KN02 Knee WidthSkirt with waistband: Measure skirt straight from bottomedge of waistband to bottom hem at center back.Skirt without waistband: Measure skirt straight from topedge of waist to bottom hem at center back.

LB01 Length WB-Ankle

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:



Skirt with waistband: Measure skirt straight from bottomedge of waistband to bottom hem at center back.Skirt without waistband: Measure skirt straight from topedge of waist to bottom hem at center back.

LB02 Length WB-Mid Thigh

Skirt without waistband: Measure skirt straight from topedge of waist to bottom hem at center back.Skirt with waistband: Measure skirt straight from bottomedge of waistband to bottom hem at center back.

LB03 Length WB-Knee;CalfMeasure specified distance from waistband seam at sideedges and center front to locate 3 points.

LH01 High Hip from WBMeasure specified distance from waistband seam at sideedges and center front to locate 3 points.

LH02 Low Hip from WBMeasure straight at leg opening across from outsideedge to outside edge. A fold back cuff will be measuredat leg opening (circum).

LO01 Leg Open Ankle less 16"


of 27

Measure straight at leg opening across from outsideedge to outside edge. A fold back cuff will be measuredat leg opening (circum).

LO02 Leg Open Calf less 16"Measure straight at leg opening across from outsideedge to outside edge. A fold back cuff will be measuredat leg opening (circum).

LO03 Leg Opening Ankle 16"-21"Measure straight at leg opening across from outsideedge to outside edge. A fold back cuff will be measuredat leg opening (circum).

LO04 Leg Opening Ankle 21"

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:




LO05 Leg Opening Calf 21"


LO06 Leg Opening Calf 16"-21"Measure straight at leg opening across from outsideedge to outside edge. A fold back cuff will be measuredat leg opening (circum).

LO07 Leg Opening Short- ExtendedMeasure straight at leg opening across from outsideedge to outside edge. A fold back cuff will be measuredat leg opening (circum).

LO08 Leg Opening FlaredMeasure straight at leg opening across from outsideedge to outside edge. A fold back cuff will be measuredat leg opening (circum).

LO09 Leg Opening Knee


of 27


LO10 Leg Opening ShortDetermine center back (CB) placement (1/2 of acrossshoulder measurement). Measure straight from neckseam edge at center back to shoulder, pivot to bottom ofsleeve at center fold.

LS01 Sleeve Length CB LongDetermine center back (CB) placement (1/2 of acrossshoulder measurement). Measure straight from neckseam edge at center back to shoulder, pivot to bottom ofsleeve at center fold.

LS02 Sleeve Length from CB Short/Elbow

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:



Measure along sleeve from neck seam to finished end ofsleeve.

LS03 Raglan Sleeve Length from Neck Seam -

Measure along sleeve from neck seam to finished end ofsleeve.

LS04 Raglan Sleeve Length from Neck Seam -Measure straight from shoulder to bottom of sleeve atcenter fold.

LS05 Sleeve Length From Shoulder LongMeasure straight from shoulder to bottom of sleeve atcenter fold.

LS06 Sleeve Length From Shoulder ShortMeasure straight from center back (CB) neck edge tobottom of back edge.

LT01 Body Length CB-Ankle; Calf


of 27

Measure straight from center back (CB) neck edge tobottom of back edge.

LT02 Body Length CB-CrotchMeasure straight from center back (CB) neck edge tobottom of back edge.

LT03 Body Length CB-KneeMeasure straight from high point shoulder (HPS) tobottom edge.

LT04 Body Front Length HPS-Ankle; Calf

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:



Measure staight from high point shoulder (HPS) tobottom edge.

LT05 Body Front Length HPS-Crotch

Measure straight from high point shoulder (HPS) to frontmidriff seam

LT06 Body Front Length HPS-MidriffMeasure straight to waist location parallel to center frontfrom high point shoulder (HPS).

LT07 Waist from HPSMeasure straight to waist location from center back (CB)neck.

LT08 Waist Placement from CBMeasure straight to waist location parallel to center frontfrom armhole.

LT09 Waist plcmnt from Armhole


of 27

Measure straight to hip location parallel to center frontfrom high point shoulder (HPS).

LT10 Hip From HPSMeasure straight from high point shoulder (HPS) tobottom edge.

LT14 Body Back Length HPS-Ankle; CalfMeasure straight from high point shoulder (HPS) tobottom edge.

LT15 Body Back Length HPS- Crotch

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:



Measure straight from high point shoulder (HPS) to backmidriff seam

LT16 Body Back Length HPS-Midriff

Measure from imaginary line at high point shoulder(HPS) at center of garment perpendicular to a) front neck edge b) front neck collar seam c) front neck seam (for sweaters w/ rib or tubular join to

ND01 Front Neck DropMeasure from imaginary line at high point shoulder(HPS) at center of garment perpendicular to a) front neck edge b) front neck collar seam (for sweaters w/ rib or tubularjoin to body seam).

ND02 Front Neck Drop to ChestMeasure from imaginary line at straps edge at center ofgarment perpendicular to front neck edge.

ND03 Front Neck Drop-Strap Miter to edgeMeasure from imaginary line at high point shoulder(HPS) at center of garment perpendicular to a) front neck edge b) front neck collar seam (for sweaters w/ rib or tubularjoin to body seam).

ND04 Back Neck Drop


of 27

Measure from imaginary line at armhole at center ofgarment perpendicular to back neck drop.

ND05 Back Neck Drop-Strap Miter to EdgeMeasure straight across neckline from: a) Inside edge to inside edge at high point shoulder(HPS) b) Seam to seam (for sweaters- w/ rib or tubular join tobody seam) at high point shoulder (HPS).

NK01 Neck WidthMeasure straight across neckline from: a) Inside edge to inside edge at high point shoulder(HPS) b) Seam to seam (for sweaters- w/ rib or tubular join tobody seam) at high point shoulder (HPS).

NK02 Neck Width Boat

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:



Measure straight through center of neck band fromcenter of button to furthest tip of buttonhole (with zippermeasure from tooth edge to tooth edge along neckseam).

NK03 Neck Opening button to buttonhole

Measure from raglan seam to raglan seam at front neckof garment

NR01 Front Neck Width RaglanMeasure from raglan seam to raglan seam at back neckof garment.

NR02 Back Neck Width- RaglanMeasure at top of the sleeve along neck seam from frontraglan seam to back raglan seam following curve.

NR03 Raglan Width along neckWith a Waistband: Measure straight from waistbandseam to leg opening at side seam. Without a Waistband: Measure straight from top edge toleg opening at side seam.

OT01 Outseam


of 27

Measure functional opening following contour or straight(depending on type of pocket), from reinforcement orseam to reinforcement or seam.

PC01 Pocket OpeningMeasure straight from edge to edge.PC02 Pocket Width

a) Measure straight at center of pocket from top edge tobottom edge.b) Measure straight at side of pocket from top edge tobottom edge.

PC03 Pocket Height

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:



Measure straight across width of coin pocket from edgeto edge, alongtop edge.

PC04 Coin Pocket Width

Measure straight across height of coin pocket from edgeto seam (in the center of the coin pocket).

PC05 Coin Pocket HeightMeasure straight the specified distance from the sideseam horizontally to the side edge of the coin pocket.

PC06 Coin Pocket Placement From Side SeamMeasure straight the specified distance from thewaistband seamvertically to the top edge of the coin pocket.

PC07 Coin Pocket Placement Below WBMeasure across pocket flap from edge to edge.PC08 Pocket Flap Width


of 27

Measure down at the side of pocket flap from top edge ofto bottom edge.

PC09 Pocket Flap Height @ SideMeasure down in the center from top edge of pocket flapto bottom edge.

PC10 Pocket Flap Height @ CenterMeasure straight down from neck seam to bottom seam.PK01 Placket Length

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:



Measure straight across placket width from edge to edgeor seamto edge.

PK02 Placket Width

Measure placket from seam to edge of placket.PK03 Sleeve Placket Length

Measure width of placket from edge to seam.PK04 Sleeve Placket Width

Measure straight from outside fold (Z) to inside fold (Y).PL01 Pleat Depth

Measure straight the specified distance from high pointshould (HPS)vertically to top edge of pocket.

PP01 Pocket Placement HPS to Hip - Vertical


of 27

Measure straight the specified distance from high pointshould (HPS)vertically to top edge of pocket.

PP02 Pocket Placement HPS to Chest - VerticalMeasure straight from high point should (HPS) to top offlap.

PP03 Pocket Flap Placement HPS - VerticalMeasure straight the specified distance from the bottomhem edgevertically to bottom edge of pocket.

PP04 Pocket Placement Bottom Edge - Vertical

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:



Measure straight the specified distance from sleeve capvertical to the closest edge of the pocket.

PP05 Pocket Placement from Shoulder Seam -

Measure straight the specified distance from center front(CF)horizontally to edge of pocket.

PP06 Pocket Placement CF - Horizontal (top)Measure straight the specified distance from the sideseam (SS)horizontally to side edge of pocket.

PP07 Pocket Placement SS - Horizontal (top)Measure the specified distance straight from yoke, nearcenter back (CB) to top edge of pocket.

PP08 Pocket Placement Yoke near CB - VerticalMeasure the specified distance straight from yoke at sideseam (SS)to top edge of pocket.

PP09 Pocket Placement Yoke @ SS - Vertical


of 27

Measure the specified distance straight from center back(CB) to sideedge of pocket (@ top corner of pocket).

PP10 Pocket Placement CB - Horizontal (bottom)Measure at waist from princess seam to center front(CF).

PS01 Princess Seam Placement from CFMeasure at waist from princess seam to center back(CB).

PS02 Princess Seam Placement from CB

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:



Pant with WB: Measure curved (without stretching) fromwaistband seam to crotch seam.Pant without WB: Measure curved (without stretching)from top of waist to crotch seam.

RS01 Front Rise from WB (curved)

Pants with WB: Measure curved (without stretching) fromwaistband seam to crotch seam.Pants without WB: Measure curved (without stretching)from top of waist to crotch seam.

RS02 Back Rise from WB (Curved)Measure shelf bra height along side seam (SS), includeelastic edge.

SF01 Shelf Bra Height @SSMeasure along center of elastic band, relaxed.(circumference)

SF02 Shelf Bra Bottom - RelaxedStretch elastic along bottom edge until fabric is flat. Donot over-extend. Measure along center of elastic band,extended.(circumference)

SF03 Shelf Bra Bottom - Extended


of 27

Measure shelf bra height at High Point Shoulder (HPS),include elastic edge.

SF04 Shelf Bra Height HPS to ElasticMeasure straight across shoulder, seam to seam (edgeto edge if sleeveless).

SH01 Across Shoulder Set-in SH01- Across Shoulder Dropped-SLEEVE LNGTH

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:



Measure perpendicular from high point shoulder (HPS)imaginary line straight down to low point of shoulderseam or edge.

SH02 Shoulder Slope

Measure straight down from high point shoulder (HPS) toshoulder seam (parallel to center front).

SH03 Shoulder Seam ForwardMeasure straight across sleeve opening from outsideedge to outside edge (circum). If shaped, measure alongcurve.Measure straight across center of cuff from outside edgeto outside edge (circum).

SO01 Sleeve Opening LongMeasure straight across sleeve opening from outsideedge to outside edge (circum). If shaped, measure alongcurve.Measure straight across center of cuff from outside edgeto outside edge (circum).

SO02 Sleeve Opening ElbowMeasure straight across sleeve opening from outsideedge to outside edge (circum). If shaped, measure alongcurve.Measure straight across center of cuff from outside edgeto outside edge (circum).

SO03 Sleeve Opening Short


of 27

Measure straight across center of sleeve opening fromoutside edge to outside edge, relaxed. (circumference)

SO04 Sleeve Opening - Relaxed (long)Measure straight across center of sleeve opening fromoutside edge to outside edge, relaxed. (circumference)

SO05 Sleeve Opening - Relaxed (elbow)Measure straight across center of sleeve opening fromoutside edge to outside edge, relaxed. (circumference)

SO06 Sleeve Opening - Relaxed (short)

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:



Measure along center of sleeve opening, extending untilfabric is flat. (circumference)

SO07 Sleeve Opening - Extended (long)

Measure along center of sleeve opening, extending untilfabric is flat. (circumference)

SO08 Sleeve Opening - Extended (elbow)Measure along center of sleeve opening, extending untilfabric is flat. (circumference)

SO09 Sleeve Opening - Extended (short)Measure down from top of shirttail at side fold to bottomedge.

SR01 Shirtail HeightMeasure from edge or seam to edge or seam. If anadjuster is present, straps must be extended with a 21/2” slider adjustment.

ST01 Strap Length Short


of 27

Measure from edge or seam to edge or seam. If anadjuster is present, straps must be extended with a 21/2” slider adjustment.

ST02 Strap Length LongMeasure straight entire front straps spread from insideedge to inside edge.

ST03 Strap Spread FrontMeasure straight entire back straps spread from insideedge to inside edge.

ST04 Strap Spread Back

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:



Measure straight edge to edge.ST05 Strap Width

a) Sweep - Straight Measure straight across bottom fromedge to edge (circum). b) Sweep – Following Curve Edge to Edge. Measurefollowing curve across bottom from edge to edge(circum).

SW01 Sweep (top)Measure straight at top of slits from edge to edge(circum).

SW02 Sweep (top of Slit)Measure straight across bottom from edge to edgewhether straight or curved (circum).

SW03 Sweep (bottom)Measure straight across bottom from edge to edge in thecenter of relaxed band or rib. (circumference)

SW04 Sweep Relaxed (Center of Ribbing)


of 27

Measure straight across bottom from edge to edge in thecenter of band or rib, extending until body fabric is flat,keeping front and back edges even. (circumference)

SW05 Sweep Extended (Center of Ribbing)a)Sweep – Measure straight across bottom from edge toedge (flat).

b) Sweep - Following Curve Edge to Edge. Measure

SW06 Sweep - Flat (top)With leg creased along out seam, or with center legpanel creased at front, measure 1” below crotch seamstraight across from edge to edge (circum).

TH01 Thigh 1" below crotch

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:



Measure straight 1” down from armhole seam straightacross from edge to edge (circum).

UA01 Upperarm 1" below armhole

Measure vent straight from top edge to bottom hem.Measure slit straight from top edge to bottom hem.

VH01 Vent/Slit HeightMeasure across vent to edge.VW01 Vent Overlap Width

Measure waist at specified distance down from:a) high point shoulder (HPS) straight across from edge toedge (circum).b) center back (CB) neck straight across from edge toedge (circum).

WA01 Waist @ spec positionBack Elastic:Relaxed: Measure straight along center of backwaistband from edge to edge. Extended: With fingers inside waist stretch back tomaximum. Measurement must be met at top edge of

WA02 Waist Back Panel (bottom)


of 27

Align front and back, waistlines to be even along top ofedge. Measure straight along center of waistband fromoutside edge to outside edge (circum).

WA03 Waist RelaxedWith fingers inside waist stretch to maximum.Measurement given is a minimum measurement andmust be met at top edge of opening and at seam orstitching if present (circum).

WA04 Waist ExtendedMeasure band from seam set to edge (circum).WA05 Contour Band @ top of WB

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:



Measure waist at midriff seam straight across from edgeto edge (circum).

WA06 Empire Waist @ seam

Measure band from seam set to edge (circum).WA07 Contour Band @ WB seam

Measure back waistband at top edge from side seam(SS) to side seam.

WA08 Back Waist- Side Seam to Side Seam (1/2)Measure front waistband at top edge from side seam(SS) to side seam. All closures must be fastened.

WA09 Front Waist - SS to SS (1/2)Measure relaxed length of elastic from end to end, atspecified location, (usually CB or Side/Back).

WA10 Waist Elastic Length @ Specified Place


of 27

Measure band from seam set to edge.WH01 Waistband Height

Measure straight from center back (CB) neck edge tobottom of of yoke.

YH01 Yoke Height @CB topSkirt with waistband: Measure yoke straight from bottomedge of waistband to bottom edge at center back.Skirt without waistband: Measure yoke straight from topedge of waist to bottom edge at center back.

YH02 Yoke Height CB from WB

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:



Skirt with waistband: Measure yoke straight from bottomedge of waistband to bottom edge at center front.Skirt without waistband: Measure yoke straight from topedge of waist to bottom edge at center front.

YH03 Yoke Height CF from WB

Measure straight down from HPS to edge of yoke.YH04 Yoke Height @ HPS (front)

Measure straight down from HPS to edge of yoke.YH05 Yoke Height @ HPS (back)

Measure zipper from zipper slider to bottom of metalstop.

ZP01 Zipper Length (bottom)Measure zipper length (closed) from top stop to bottomof bottom stop.

ZP02 Zipper Length @ CF (top)


of 27

Measure zipper length (closed) from top stop to bottomof bottomstop.

ZP03 Zipper Length @ SS (top)

Grading Worksheet


Technical Designer:

Designer:

Merchandiser:

Description:

Pack Number 2:

Pack Number 1:

Model Number:

Group Numbers:

GSO Number:

Spread ID:

CoO:

Vendor:

Size:

Product Type:




of 27

How to Measure

Documents

Transcript of How to Measure