How to measure for Roman blinds - Loom and Last · How to measure for Roman blinds Use a metal tape...

2
Installation height Control Left / Right cm Window name W Width D Drop Dimensions cm cm 1 W D W D + 8cm W D 2 2 How to measure for Roman blinds Use a metal tape measure for accuracy. Measurements should be in cm to the nearest 0.5cm. Double check your measurements. Where do you want to hang your blind? Measure your window A - Inside recess B - Outside recess C - Fixed to wooden window architrave A - Inside recess B - Outside recess C - Fixed to wooden window architrave Check for any obstructions that might stop your blind hanging freely. Wonky frames or Victorian windows? Measure the width at the narrowest point to ensure that the blind can move up and down freely. We make your blinds to the exact width specified. We recommend at least 8cm overlap outside the frame, particularly if you have a blackout blind and are concerned about light leakage. Check for any obstructions that may stop your blinds hanging freely. Sidewinder

Transcript of How to measure for Roman blinds - Loom and Last · How to measure for Roman blinds Use a metal tape...

Page 1: How to measure for Roman blinds - Loom and Last · How to measure for Roman blinds Use a metal tape measure for accuracy. Measurements should be in cm to the nearest 0.5cm. Double

Installation height

Control Cord / Sidewinder Left / Right

cm

Window name WWidth DDrop

Dimensions cm cm

1

W

D

W

D + 8cm

W

D

22

How to measure for Roman blindsUse a metal tape measure for accuracy. Measurements should be in cm to the nearest 0.5cm. Double check your measurements.

Where do you want to hang your blind?

Measure your window

A - Inside recess B - Outside recess C - Fixed to wooden window architrave

A - Inside recess B - Outside recess C - Fixed to wooden window architrave

Check for any obstructions that might stop your blind hanging freely.

Wonky frames or Victorian windows?Measure the width at the narrowestpoint to ensure that the blind canmove up and down freely.

We make your blinds to the exactwidth specified.

We recommend at least 8cm overlapoutside the frame, particularly if youhave a blackout blind and are concerned about light leakage.

Check for any obstructions that maystop your blinds hanging freely.

Sidewinder

Page 2: How to measure for Roman blinds - Loom and Last · How to measure for Roman blinds Use a metal tape measure for accuracy. Measurements should be in cm to the nearest 0.5cm. Double

Which control would you like, on which side?3

Cord and cleat Sidewinder (metal chain)

Right side

Left side

4

H

Order online or call 01394 775670

Loom & Last Ltd. (c) 2019www.loomandlast.com

Installation heightTo comply with child safety legislation we require your installation height (H) to ensure your chain is a safe distance (at least 1.5cm) from the floor.

Which side would you like the sidewinder on?

Right side Left side

Which control would you like, on which side?3

Cord and cleat Sidewinder (metal chain)

Right side

Left side

4

H

Order online or call 01394 775670

Loom & Last Ltd. (c) 2019www.loomandlast.com

Installation heightTo comply with child safety legislation we require your installation height (H) to ensure your chain is a safe distance (at least 1.5cm) from the floor.