How to Installing PC

7/29/2019 How to Installing PC

1/18

How to Installing PC

Introduction

Many people out there thinking that installing PC by them self is hard, actually is not.

Even thought PC is collection of piece electronic component that is hazardous in your mind,

but is not like what are u thinking about. Now PC component design safety and easy, you

dont need to be afraid that you will go wrong when you install it, because all the PC

component is design differently and safely, so all you need is just to make sure that all

component wire, slot, and position suitable with the another component. If you are not sure to

install a PC, these guidelines can be your basis.

Objective

The purpose of this project is for people guide how to install PC (personal computer)

and this is very useful for none expert public who interest in built and install their own PC.

Install own PC have many advantage such as people can add something inside their own PC.

We equip step by step all about install PC complete and clearly. People can follow the step

that we guidelines to install own PC and very useful for maximum using of PC.

The Main Issues

The main issue of install PC (personal computer) is to have our own satisfaction of

using computer. And had everything what we need inside our own PC and we will understand

if in case that we need to add or upgrade our PC. Like that we know that to install PC got

many complicated think inside, but here we like to solve that complicated think to become

easy way to install PC.


2/18

Target Audience

Our target audience is people in the age of 15 years old until 35 years old, the age of

people who have interest in computer and got easy to understand the complicated think such

as installing PC.

Equipments / Tools

Flash MX 2004 (Free software) ACD See Pro2 Adobe Photoshop CS4 Camera Sony Alpha 300 Screwdriver

Web Structure

Screen size : 1000 x 800 pixels Action Script Next button & previous button Tween guide Text Importing image Movie clip Button Number of slide: 11 slides Sound


3/18

PC Contents:

Motherboard : Gigabyte EP45-UD3R

CPU : Core 2 Duo E8400 processor

CD/DVD rom : Samsung 20X DVD-RW SATA

Graphic Card : Asus EAH3650

Hard Disk : Western Digital 500GB SATA

Casing : Cooler Master Full Tower

CPU Cooler : Cooler Master 5 pipe Heat sink

Power Supply : Cooler Master 450W

Memory (RAM) : Kingston 2GB DDR2

System Fan : Zalman 12 fan


4/18

Main Menu

About Us


5/18

1

2

3

4

5

6

7

8

9

10

11

12


6/18

13

14

15

16

17

18

1. Installing CPU

Step 1:

Completely raise the CPU socket lever. (Picture no. 4)

Step 2:

Lift the metal load plate from the CPU socket. (DO NOT touch socket contacts)

(Picture no. 5)

Step 3:

Remove the protective socket cover from the load plate. (Picture no. 6)

Step 4:

Hold the CPU with your thumb and index fingers. Align the CPU pin one marking (triangle)

with the pin one corner of the CPU socket (or you may align the CPU notches with the socket

alignment keys) and gently insert the CPU into position. (Picture no. 7)


7/18

Step 5:

Once the CPU is properly inserted, replace the load plate and push the CPU socket lever back

into its locked position. (Picture no. 8)

2. Installing CPU Cooler

Step 1:

Apply an even and thin layer of thermal grease on the surface of the installed CPU.

Step 2:

Place the cooler atop the CPU. (Make Sure 4 screws insert correctly into the 4 holes)

(Picture no. 10)

Step 3:

Put in the screw holder. (Picture no. 12)

Step 4:

Screw up every single screw. (Picture no. 13)

Step 5:

Place fan CPU cooler atop the CPU cooler and screw it up. (Picture no. 17)


8/18

1

2

3

4

3. Installing Memory (RAM)

Step 1:

Note the orientation of the memory module. Spread the retaining clips at both ends of the

memory socket. Place the memory module on the socket. Place your fingers on the top edge

of the memory, push down on the memory and insert it vertically into the memory socket.

(Picture no. 3)

Step 2:

The clips at both ends of the socket will snap into place when the memory module is securely

inserted. (Picture no. 4)


9/18

1

2

3

4

4. Installing CD/DVD rom

Step 1:

Insert the CD/DVD rom into the slot. (from front side) (Picture no. 3)

Step 2:

Locked up the CD/DVD rom. (Picture no. 4)


10/18

1

2

3

5. Installing Hard Disk

Step 1:

Insert the hard disk into hard disk slot. (Inside the casing) (Picture no. 2)

Step 2:

Locked up the hard disk. (Picture no. 3)

Notice: there is two slots behind the CD/DVD rom and Hard Disk, that is for SATA power

and SATA connector.


11/18

1

2

3

6. Installing System Fan

Step 1:

Put the system fan into the casing. (Inside the casing, back panel) (Picture no. 2)

Step 2:

Screw up from rear side of casing. (Picture no. 3)

1

2

3

7. Installing Motherboard (into casing)

Step 1:

Put the Motherboard into inside the casing. (Picture no. 2)

Step 2:

Screw up the Motherboard. (Picture no. 3)


12/18

1

2

3

4

5

6

7

8

8. Installing Graphic Card

Step 1:

Insert graphic card into graphic card slot in motherboard. (Picture no. 3)

Step 2:

Make sure it also in casing rear slot. (Picture no. 4)

Step 3:

Lock the graphic card to the motherboard and casing.


13/18

1

2

3

4

9. Installing Power Supply

Step 1:

Put in the power supply into the casing. (From inside) (Picture no. 3)

Step 2:

Screw up the power supply from rear side of casing. (Picture no. 4)


14/18

1

2

3

4

5

6

7

8

9

10

11

12


15/18

13

14

15

16

17

18

19

20

21

22

23

24


16/18

10. Installing Wires

A. ATX (2x4 12Vand 2x12 main power connector)

Attach ATX 2x4 and 2x12 power connector (power supply wire) to the ATX power slot

header on the Motherboard. (Picture no. 4)

B. SATA

Attach SATA connector to the SATA slot header on the motherboard and attach another side

of SATA connector to the hard disk and CD/DVD rom SATA slot. (Picture no. 7)

C. USB (front)

Attach USB connector (casing wire) to the USB slot header. (Picture no. 11)

D. Audio (front)

Attach audio connector (casing wire) to the AUDIO slot header. (Picture no. 14)

E. System fan

Attach System fan wire connector to the system fan slot header. (Picture no. 17)

F. System Power LED

Attach System power LED wire connector into the System power LED header.

(Picture no. 22)

G. SATA power wire

Attach SATA power wire (power supply) into the CD/DVD rom and hard disk SATA power

slot. (Picture no. 24)


17/18

Conclusion

All the information in these guidelines is suitable for beginners and this support

information for people about required hardware, such as motherboard, hard disk and other.

We provide illustration with picture step by step to guide fit every part together into PC.

Install PC is easy and not as hard as people think, you just need to follow our

guidelines and everything will be easy, with these guidelines people dont need to think twice

to install their own PC, so try to install own PC is fun.


18/18

Reference:

1. An Introduction to the Personal Computer:http://www.buildyourown.org.uk/pc-information/introduction/

2. Gigabyte mother board GA-EP45-UD3R/UD3 hand book guide.
http://www.buildyourown.org.uk/pc-information/introduction/http://www.buildyourown.org.uk/pc-information/introduction/

How to Installing PC

Documents

Transcript of How to Installing PC