How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure...
Transcript of How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure...
![Page 1: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/1.jpg)
How to install TP-Link Print Server by using Standard TCP/IP port on
Windows computer?
Since Windows supports TCP/IP printing, it is compatible with our Print Servers, like TL-
PS110U/TL-PS110P/TL-PS310U/TL-WPS510U. Here is the configuration guide.
Note: Before the installation, please make sure the printer works fine if it is connected to
computer directly.
Choose the operating system of your computer
For Windows 2000/XP
http://www.tp-link.com/en/faq-181.html
Step 1 Click Star->Printers and Faxes-> Printers.
Step 2 Double click on Add Printer.
Step 3 Click Next on the Welcome screen.
Step 4 The Local or Network Printer screen will open. Select Local printer.
Uncheck Automatically detect and install my Plug and Play printer.
Step 5 Click Next.
![Page 2: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/2.jpg)
Step 6 The screen of Select a Printer Port will open. Select Create a new port and Standard
TCP/IP Port.
Step 7 Click Next.
Step 8 Click Next again on the welcome screen.
Step 9 The Add Standard TCP/IP Printer Port screen will open. Enter the IP address of the
printer server. For Port Name, it will be entered automatically.
Step 10 Click Next.
Step 11 The Additional Port Information Required screen will open. Select Custom. Click
Settings.
![Page 3: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/3.jpg)
Step 12 The Configure Standard TCP/IP Port Monitor screen will open.
By using LPR protocol
Select LPR for Protocol. Enter lp1 in the Queue Name field. Click on the LPR Byte Counting
Enabled checkbox (Due to a flaw in Windows LPR, some print servers will not accept jobs
unless Byte Counting is enabled).
By using Raw protocol
In the Protocol section, select Raw
In the Port Number field, enter 9100
![Page 4: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/4.jpg)
Step 13 Click OK, then Next and Finish.
Step 14 A window will show all of the drivers, select the appropriate one.
a. In the window, select an appropriate name (Use the Queue name for clarity when making
multiple printer definitions).
b. Keep existing driver if necessary.
![Page 5: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/5.jpg)
c. In the Print Test Page window, you may test as needed if necessary.
d. Click Next.
![Page 6: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/6.jpg)
e. Click Finish.
For Windows 7/Vista
Situation 1
http://www.tp-link.com/en/faq-240.html
You never use the printer on your computer before but also want to share printing; you just need
to add a printer, follow the steps to create a Standard TCP/IP port, and then install the printer
driver.
Step 1 Click Start-> Control Panel, and select Devices and Printers.
Step 2 Click Add a printer.
Step 3 Select Add a local printer.
![Page 7: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/7.jpg)
Step 4 Select Create a new port, and the type of port is Standard TCP/IP Port.
Step 5 Input the IP address of the print server and click Next. The windows will detect the
TCP/IP Port. Please wait for the next page.
![Page 8: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/8.jpg)
Step 6 Select Custom and click Settings. And then on the next page, please select LPR as the
Protocol and the Queue Name is lp1.
![Page 9: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/9.jpg)
Step 7 It will ask you to install the driver of the printer. You can select one in the list or
click Have Disk to install other drivers. Please follow the steps to finish the installation.
![Page 10: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/10.jpg)
![Page 11: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/11.jpg)
Step 8 After that, the new printer is in the list. And you can enjoy the sharing.
Situation 2
http://www.tp-link.com/en/faq-239.html
![Page 12: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/12.jpg)
You ever connected directly a printer to your computer by a USB cable or a parallel cable, and
installed the printer driver. Now you want to use a print server to share the printer through your
network. You need to change the printer port to Standard TCP/IP port.
Step 1 Click Start-> Control Panel -> Classic View -> Printers.
Step 2 Find your installed printer icon, right-click, select Properties.
Step 3 Click Ports -> Add Port -> Standard TCP/IP Port -> New Port -> Next.
![Page 13: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/13.jpg)
Step 4 Input the exact IP address of print server that you configured it. Click Next.
Step 5 Select Custom, and click Settings.
![Page 14: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/14.jpg)
Step 6 Choose LPR, and input the queue name as lp1. Click OK.
Step 7 Click Next, Finish, to complete the wizard.
![Page 15: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/15.jpg)
Step 8 Click Close and Apply.
![Page 16: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/16.jpg)
Now, the printer port has been created.
For Windows 8
http://www.tp-link.com/en/faq-459.html
Windows 8 is a new operating system of Microsoft, it changed greatly compared with the former
versions. Since it also supports TCP/IP printing, it is compatible with our Print Servers, like TL-
PS110U/TL-PS110P/TL-PS310U/TL-WPS510U. Here is the configuration guide.
Note: Before the installation, please make sure the printer works fine if it is connected to
computer directly.
Step 1 Please move your mouse to the right corner and you will see Search. Click it and
search Control Panel.
![Page 17: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/17.jpg)
Step 2 Go to Control Panel->Hardware and Sound page, and click Advanced printer setup.
Step 3
A window will pop out to search the printers automatically, please ignore it and
click Next button.
![Page 18: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/18.jpg)
Step 4 Please Select Add a Printer using a TCP/IP address or hostname, click Next.
![Page 19: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/19.jpg)
Step 5 Please select Custom and click Settings.
Step 6 Please type the IP address of your Print Server in Hostname or IP address. The print
server’s IP should in same subnet with your router. As default, the Protocol is Raw. You can
keep it still or select LPR. The two protocols support different printing languages. You can try
one first, if can’t print, delete it and try another one.
![Page 20: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/20.jpg)
Step 7 Select the correct driver for your printer. If you can’t find the model of your printer,
please connect your printer to PC with USB cable and install the driver first. Click Next.
![Page 21: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/21.jpg)
Step 8 Click Next.
Step 9 Click Finish.
![Page 22: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/22.jpg)
Until now, you have finished the installation. You can find the newly added Printer on Control
Panel-> Hardware and Sound-> Devices and Printers page.
For Windows 10
http://www.tp-link.com/en/faq-929.html
Since Windows 10 supports TCP/IP printing, it is compatible with our Print Servers, like TL-
PS110U/TL-PS110P/TL-PS310U/TL-WPS510U. Here is the configuration guide.
Before the installation, please make sure the printer works fine if it is connected to computer
directly.
Step 1 Configure the print server as usual. Example looks below (sample is using IP
192.168.1.147).
![Page 23: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/23.jpg)
Step 2 Open Device & Printers on Control Panel, or Press Window Button, then type
“Printer” then Enter.
![Page 24: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/24.jpg)
Step 3 Click “Add a printer”. Then it will automatically search for devices. Instead, click “The
Printer that I want isn’t listed”.
Step 4 Then it will show Add Printer page. Select “Add a local printer or network printer
with manual settings”. Then next.
![Page 25: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/25.jpg)
Step 5 On the next page, you will be asked for printer port. In this case, select “Create a new
port”, and then select “Standard TCP/IP Port”. Then next.
![Page 26: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/26.jpg)
Step 6 Next page you will be asked for IP address of your device. Put in the print server’s IP
Address and on the Port Name, add some text. For example, 192.168.1.147_X. Also remember
NOT to tick the “Query the printer and automatically select the driver to use”.
![Page 27: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/27.jpg)
Step 7 You then will be shown a page with Detecting TCP/IP Port. Wait a few minutes depends
on your network configuration. It will show you that the system cannot find any devices. Don’t
worry, this is as expected. Then you will be shown the page like next page.
![Page 28: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/28.jpg)
Select “Custom” then click “Settings…”
Step 8 Please type the IP address of your Print Server in Hostname or IP address. The print
server’s IP should in the same subnet with your router. As default, the Protocol is Raw. You can
keep it still or select LPR. The two protocols support different printing languages. You can try
one first, if can’t print, delete it and try another one.
![Page 29: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/29.jpg)
Step 9 Click Next.
![Page 30: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/30.jpg)
Step 10 You will be asked to select your printer driver. Select based on your printer model and
type from Windows standard drivers. Or you can use from your printer CD/DVD setup kit. After
that, click Next.
Step 11 Then you will be asked whether you would like to use current driver or replace it. This is
only happen when you already have printer driver before. I assume that you have installed
previously. So, select to replace.
![Page 31: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/31.jpg)
Step 12 Then put the name of your printer here.
Step 13 Click “do not share this printer”.
Step 14 Set this printer as default by ticking the selection “Set as the default printer” or not.
Also if you want to do Print test, just press the button “Print a test page”.
![Page 32: How to install TP-Link Print Server by using Standard TCP/IP port … · Step 12 The Configure Standard TCP/IP Port Monitor screen will open. By using LPR protocol Select LPR for](https://reader030.fdocuments.us/reader030/viewer/2022040215/5ecee971e3d25d0d837a3bd2/html5/thumbnails/32.jpg)