HOW TO INSTALL - SpanSet...APPLICATION The SpanSet suspension trauma relief straps, when used in...
2
2.016/7-13 © SpanSet Australia Ltd 2013. All specifications correct at time of publishing. SpanSet Australia Ltd reserve the right to alter a specification at any time without notice. Height Safety Lifting Load Control Safety Management 01 SG238 SUSPENSION TRAUMA RELIEF STRAPS USER INSTRUCTIONS Head Office SpanSet Australia Ltd 13 Pullman Place (PO Box 164) Emu Plains NSW 2750 Phone: 02 4735 3955 Fax: 02 4735 3630 [email protected] www.spanset.com.au Queensland Office Unit 7, 4 Henry Street Loganholme QLD 4129 Mobile: 0413 737 079 North Queensland Office Mobile: 0435 795 168 Victoria Office Mobile: 0413 737 076 Western Australia Office Unit 1–2, 37 Tulloch Way Canning Vale WA 6155 Phone: 08 9455 7404 Fax: 08 9455 3477
Transcript of HOW TO INSTALL - SpanSet...APPLICATION The SpanSet suspension trauma relief straps, when used in...
2.01
6/7-
13
©
Spa
nSet
Aus
tralia
Ltd
201
3. A
ll sp
ecifi
catio
ns c
orre
ct a
t tim
e of
pub
lishi
ng. S
panS
et A
ustra
lia L
td re
serv
e th
e rig
ht to
alte
r a s
peci
ficat
ion
at a
ny ti
me
with
out n
otic
e.
Height SafetyLiftingLoad ControlSafety Management01SG238 SUSPENSION TRAUMA RELIEF STRAPS USER INSTRUCTIONS
Head Office
SpanSet Australia Ltd 13 Pullman Place (PO Box 164) Emu Plains NSW 2750
Phone: 02 4735 3955 Fax: 02 4735 3630
[email protected] www.spanset.com.au
Queensland Office
Unit 7, 4 Henry Street Loganholme QLD 4129
Mobile: 0413 737 079
North Queensland Office
Mobile: 0435 795 168
Victoria Office
Mobile: 0413 737 076
Western Australia Office
Unit 1–2, 37 Tulloch Way Canning Vale WA 6155
Phone: 08 9455 7404 Fax: 08 9455 3477
APPLICATION
The SpanSet suspension trauma relief straps, when used in conjunction with a full body harness, are designed to aid in the prevention of suspension trauma after a fall from height has occurred.
WHERE TO INSTALL
The suspension trauma straps should be installed at the junction of the shoulder strap and leg strap of the full body harness as below.
HOW TO INSTALL
Lay the exposed loop from the trauma strap pouch under the harness webbing.
Button pouch around harness Webbing, ensuring the press stud is below the ‘choke’.
Repeat the process for the other side of the harness, ensuring one pouch is marked “Hook” and the other pouch is marked “Loop”.
‘Choke’ the pouch around the webbing and through the loop.
USELocate, unzip and deploy each case containing the suspension relief straps.
Step onto the strap to relieve the pressure on the legs and groin. Repeat step two and three if the length is not suitable.
Raise the ends of the two straps to reach the hook and loops. Fit the hook though the loop that will give you the required length and lower the straps.
