How to install canon wireless printer - Risezone
description
Transcript of How to install canon wireless printer - Risezone
How to Install
Wireless Printer
Step 1: Take away all the protective materials & orange color tape on the outer surface the machine.
Step 2: Open the Paper Output Tray & raise the Scanning unit Cover.
Step 3 :Remove protective material & orange color tape in the region of Ink Cartridge Holder. Shut the Scanning unit cover.
Step 4: Place in the power cord into the power interface on the left side of the printer & connect the next end to the wall of power outlet.
Step 5:Push the ON button to turn on the printer. Use Operation Panel to select the language and then press the OK button.
Step 6: Push ON button to turn off printer. Open Scanning part Cover. Insert Ink Cartridge Holder into the Holder. Shut the Scanning unit Cover.
Step 7 :Press ON button to turn on printer. Wait a while for printer to adjust the Ink Cartridge.
Step 8 :Press the Setup button. Use Operation Panel select Wireless LAN setup, then press OK button.
Step 9: Select Easy setup. Press OK button. Select Access point, press OK button.
Step 10:Enter WEP-key by Operation Panel, press OK.
Step 11: Insert the Setup CD-ROM in to the computer's CD-ROM drive.
Step 12 :Click Run Msetup4.exe on the AutoPlay screen. If AutoPlay screen not shown, go to the CD-ROM folder and right click Msetup4.exe then choose open.
Step 13 :Select your place of residence in the pop-up window. Then click Next.
Step 14 :Click Easy Install. At the next page Click Install.
Step 15 :Select Use the printer on network. Then click Next.
Step 16 :Wait for the installation. It will take a while. When Printer Detection screen appears, click next.
Step 17:In the detected printers list, select your Printer and click Next.
Step 18 :Wait for printer Setup Completion window appears, click Complete.
Step 19: The Printer Application Menu will appear. Now the setup is completed. Congratulations.