How to connect a printer to your computer
-
Upload
rose-traeger -
Category
Technology
-
view
6 -
download
2
Transcript of How to connect a printer to your computer
How To Connect A Printer To Your Computer
To connect a printer to the system, you have to be careful and make sure that all your connections are properly fixed.
A little mistake can stop your device from printing. So, while setting up your
device check the connections one more time to avoid any disconnection.
If you have a printer and want to connect it to your system then you can follow the simple steps given by Dell
printer support.
Steps to connect a printer to a windows system1. First, you have to place the printer close to
the system so that the cables can reach to your system without any tension.
2. If you have received any software with the printer, then install it on your system before connecting it. This will make your process easier and less time consuming. If you haven't got any software with the printer, do not worry as the Windows system will automatically detect the printer when it will be plugged.
3. Now, plug the printer in your computer using a USB cable. While connecting a printer to the system, make sure that the printer is plugged into the power source. After that, turn on the printer.
4. Here, few instructions will be given. You have to follow the instructions and prompt which will help you to install the drivers and software.
5. Now, confirm that your device is installed correctly. To check this, open the 'Control panel' on your system and choose the 'Devices and Printers' options. Here, your recently installed printer will be displayed.
6. If due to some reason your printer is not showing up on your system then install the new drivers from the manufacturer website. Visit the website and download the drivers for your printer model. If any problem occurs while setting up a connection, you can simply contact the customer care number of Dell printer support number Australia.
Connecting the printer to your Mac computer
1. Keep your printer close to the computer so that the wires are connected properly.
2. Now, install the software that came with your printer. If you haven't received any such software then connect the printer to the system and it will automatically detect the device.
3. Now, plug your printer into your system with the help of the USB cable from one end and connect to main power supply from the other end.
4. Here in this step you have to follow the prompts to install the device on your system.
5. Now, confirm that your device is connected properly by clicking on the 'Apple' menu on your system. After that, select 'Print and Scan' and search for the printer in the list available there.
6. If the printer is not installed then download the drivers from the manufacturer's website.
If any problems regarding printer just call at
Dell Printer Technical Support
number +61-283206005
Original Source:http://bit.ly/2lQzLio