How to Build an Ethernet Cable ASIF ISLAM LTEC 4550 University of North Texas.
-
Upload
deirdre-robertson -
Category
Documents
-
view
219 -
download
1
Transcript of How to Build an Ethernet Cable ASIF ISLAM LTEC 4550 University of North Texas.
![Page 1: How to Build an Ethernet Cable ASIF ISLAM LTEC 4550 University of North Texas.](https://reader034.fdocuments.us/reader034/viewer/2022052510/56649dbd5503460f94ab004f/html5/thumbnails/1.jpg)
How to Build an Ethernet Cable
ASIF ISLAMLTEC 4550
University of North Texas
![Page 2: How to Build an Ethernet Cable ASIF ISLAM LTEC 4550 University of North Texas.](https://reader034.fdocuments.us/reader034/viewer/2022052510/56649dbd5503460f94ab004f/html5/thumbnails/2.jpg)
Introduction• First commercially introduced in 1980, Ethernet cable is the still the most
popular way of networking for home and office. Ethernet cabling technology was invented by Xerox Park and it’s very secure to network. And most importantly, it’s most the compatible networking cable ever invented
• There are six different types of Ethernet cable: Category or Cat 3, 5, 5e, 6, 6a and 7 and they differ for their transmission speed and interface.
In this illustration, I will explain the steps in building the most popular and used Category
5e Ethernet Cable.
![Page 3: How to Build an Ethernet Cable ASIF ISLAM LTEC 4550 University of North Texas.](https://reader034.fdocuments.us/reader034/viewer/2022052510/56649dbd5503460f94ab004f/html5/thumbnails/3.jpg)
What We Need
1. Unshielded twisted pair (UTP) cable (Cat 5e)2. RJ45 Connector (Modular Connector)3. Crimping Tool4. Cable Tester
Islam[Personal Screenshot]. July 21, 2014
![Page 4: How to Build an Ethernet Cable ASIF ISLAM LTEC 4550 University of North Texas.](https://reader034.fdocuments.us/reader034/viewer/2022052510/56649dbd5503460f94ab004f/html5/thumbnails/4.jpg)
Standards of Wiring Ethernet Cable
There are two standards of building Ethernet cable.1. T568A 2. T568B
We care going to use the most popular
T568B Chart. [Online Screenshot]. http://www.cnet.com/how-to/how-to-make-your-own-ethernet-cable/
![Page 5: How to Build an Ethernet Cable ASIF ISLAM LTEC 4550 University of North Texas.](https://reader034.fdocuments.us/reader034/viewer/2022052510/56649dbd5503460f94ab004f/html5/thumbnails/5.jpg)
Step 1
We will strip the cable jacket on one side; approximately 1.5 inch down from the end.
Step 1, Islam[Personal Screenshot]. July 21, 2014
![Page 6: How to Build an Ethernet Cable ASIF ISLAM LTEC 4550 University of North Texas.](https://reader034.fdocuments.us/reader034/viewer/2022052510/56649dbd5503460f94ab004f/html5/thumbnails/6.jpg)
Step 2
We will spread the four pair of twisted wire apart. If needed pulling the string will bring down the jacket more for convenience.
Step 2, Islam[Personal Screenshot]. July 21, 2014
![Page 7: How to Build an Ethernet Cable ASIF ISLAM LTEC 4550 University of North Texas.](https://reader034.fdocuments.us/reader034/viewer/2022052510/56649dbd5503460f94ab004f/html5/thumbnails/7.jpg)
Step 3
• Next we will need our T568B standard chart handy.
• We will untwist all four pairs of wires and align them according to our chart.
Step 3, Islam[Personal Screenshot]. July 21, 2014
![Page 8: How to Build an Ethernet Cable ASIF ISLAM LTEC 4550 University of North Texas.](https://reader034.fdocuments.us/reader034/viewer/2022052510/56649dbd5503460f94ab004f/html5/thumbnails/8.jpg)
Step 4
Then we will cut the edge of the wire as straight as possible.
(this step is very important before insertion)
Step 4, Islam[Personal Screenshot]. July 21, 2014
![Page 9: How to Build an Ethernet Cable ASIF ISLAM LTEC 4550 University of North Texas.](https://reader034.fdocuments.us/reader034/viewer/2022052510/56649dbd5503460f94ab004f/html5/thumbnails/9.jpg)
Step 5Now we will push the aligned wires all the way inside the connector.
(very important to push them in their appropriate guides)
Step 5, Islam[Personal Screenshot]. July 21, 2014
![Page 10: How to Build an Ethernet Cable ASIF ISLAM LTEC 4550 University of North Texas.](https://reader034.fdocuments.us/reader034/viewer/2022052510/56649dbd5503460f94ab004f/html5/thumbnails/10.jpg)
Step 6
We will push the connector in the crimping tool and squeeze all the way down
Step 6, Islam[Personal Screenshot]. July 21, 2014
![Page 11: How to Build an Ethernet Cable ASIF ISLAM LTEC 4550 University of North Texas.](https://reader034.fdocuments.us/reader034/viewer/2022052510/56649dbd5503460f94ab004f/html5/thumbnails/11.jpg)
Step 7
Now we can repeat step 1 to 6 for the other end of the cable
Step 7, Islam[Personal Screenshot]. July 21, 2014
![Page 12: How to Build an Ethernet Cable ASIF ISLAM LTEC 4550 University of North Texas.](https://reader034.fdocuments.us/reader034/viewer/2022052510/56649dbd5503460f94ab004f/html5/thumbnails/12.jpg)
Step 8[Our cable is built]
To ensure the proper data flow between each end, we can use a network cable test to check both end.
Step 8, Islam[Personal Screenshot]. July 21, 2014
![Page 13: How to Build an Ethernet Cable ASIF ISLAM LTEC 4550 University of North Texas.](https://reader034.fdocuments.us/reader034/viewer/2022052510/56649dbd5503460f94ab004f/html5/thumbnails/13.jpg)
By following step 1-8, I made two network cable
Islam[Personal Screenshot]. July 21, 2014