How to Add and Delete Users on Ubuntu 12How to Add and Delete Users on Ubuntu 12
How To Add System Call In Ubuntu OS
-
Upload
pratik-tambekar -
Category
Engineering
-
view
728 -
download
10
description
Transcript of How To Add System Call In Ubuntu OS
How To Add System Call In UBUNTU Operating System
Presented by:
Pratik Tambekar
Guided by:
Mr. T.R Ravi
CONTENTS
WHY UBUNTU?INTRODUCTIONWHAT IS KERNEL?WHAT IS SYSTEM CALL?HOW TO ADD SYSTEM CALLHOW TO REPLACES NEW KERNEL
FILE WITH OLD KERNEL FILEREFRENCES
WHY UBUNTU?Free Ubuntu is and will always be free in the
future. Ubuntu is developed by people all over the world embracing the principle of Free libre open-source software (FLOSS). This enables new software and updates to be available free of cost since they are written by volunteers and also the employees of Canonical, the parent company of Ubuntu.
No Viruses While using Ubuntu, you do not need to worry about installing any anti-virus programs since Ubuntu is completely free of viruses.
CONT….Community Support When you need help
using your system, the community is available everywhere around you to support you at all times. All this are done voluntarily by people passionate about Ubuntu.
Up to date software Ubuntu will always be up to date with updates released regularly to ensure that your system is secure and bug free. These regular updates will be always be available for free.
Beautiful, Polished, Stable These are the goals of every Ubuntu release. Your Ubuntu is designed with the help of the community and experts after extensive discussion. Ubuntu is regularly user tested to ensure that it is easy and simple to use while preserving its elegance and polish.
INTRODUCTION
Ubuntu was founded by Mark Shuttleworth, a South African entrepreneur coming up with their first release Ubuntu 4.10 codenamed Warty Warthog in October 2004.
Ubuntu is an African concept meaning “humanity toward others”
Sponsored by Canonical Ltd. Owned by South African billionaire Mark Shuttleworth.
Ubuntu is a Linux-based Operating System that is open sourced (free)
Pronounced (oo-BOON-too) Strong focus on usability and ease of installation
Ubuntu Releases
Table of versions
Advantages and Disadvantages over windows.
- Advantages: 1) Not vulnerable to Windows malware/viruses 2) Free 3) Tends to run more efficiently than Windows 4) Not subject to Microsoft's cripple ware.
- Disadvantages:1) Won't run most Windows applications (especially games)2) Requires a higher than average nerd factor (not as user friendly)3) Doesn't work with all hardware (but neither does Windows!)
4) Can be somewhat buggy
What is Kernel? The central module of an operating system. It is
the part of the operating system that loads first, and it remains in main memory. Because it stays in memory, it is important for the kernel to be as small as possible while still providing all the essential services required by other parts of the operating system and applications.
It acts as an interface between the user applications and the hardware.
Typically, the kernel is responsible for memory management, process management, task management, I/O communication and disk management.
CONT....
Types of Kernels: Kernels may be classified mainly in two categories
1) Monolithic 2) Micro Kernel
Linux follows the monolithic modular approach
CONT.... Monolithic kernel: In this type of kernel
architecture, all the basic system services like process and memory management, interrupt handling etc were packaged into a single module in kernel space. This type of architecture led to some serious drawbacks like
1) Size of kernel, which was huge. 2) Poor maintainability, which means bug fixing
or addition of new features resulted in recompilation of the whole kernel which could consume hours
CONT....
What is System Call?System calls are low level functions the
operating system makes available to applications via a defined API (Application Programming Interface)
System calls represent the interface the kernel presents to user applications.
In Linux all low-level I/O is done by reading and writing file handles, regardless of what particular peripheral device is being accessed—a tape, a socket, even your terminal, they are all files.
Low level I/O is performed by making system calls.
Anatomy of a System CallA System Call is an explicit request to the
kernel made via a software interrupt.The interrupt call ‘0x80’ call to a system call
handler (sometimes called the “call gate”).The system call handler in turns calls the
system call interrupt service routine (ISR). To perform Linux system calls we have to do
following:
- Put the system call number in EAX register.
- Set up the arguments to the system call in EBX,ECX, etc.
- call the relevant interrupt (for DOS, 21h; for Linux, 80h).
- The result is usually returned in EAX.
CONT…. There are six registers that are used for the
arguments that the system call takes. The first argument goes in EBX, the second in ECX, then EDX, ESI, EDI, and finally EBP. If more then 6 arguments needed (not likely), the EBX register must contain the memory location where the list of arguments is stored.
basic system calls: ◦ sys_open ◦ sys_close◦ sys_read◦ sys_write◦ sys_Fork ◦ sys_exit
CONT…. Sys_open - open a filesystem call number (in EAX): 5arguments:
◦ EBX: The pathname of the file to open/create
◦ ECX: set file access bits (can be OR’d togather): O_RDONLY open for reading only O_WRONLY open for writing only O_RDRW open for both reading and
writing O_APPEND open for appending to the end
of file O_TRUNC truncate to 0 length if file
exists O_CREAT create the file if it doesn’t exist
◦ EDX: set file permissions.Returns in EAX: file descriptor.On errors: -1.
Error handling
System calls set a global integer called errno on error.
The constants that errno may be set to are (partial list):
◦EPERM operation not permitted.
◦ENOENT no such file or directory (not there).
◦EIO I/O error – EEXIST file already exists.
◦ENODEV no such device exists.
◦EINVAL invalid argument passed.
CONT…
Example
How to add a System CallUbuntu 10.10 and using kernel version
2.6.37.3 If you are using any other kernel version just replace 2.6.37.3 with your version.
I am also assuming you have extracted the source code.
Now let the new system call’s name be “add2”.
1. Now you will find a “arch” folder in the source code folder. Open the file arch/x86/kernel/syscall_table_32.S in a text editor. Go to the end of the document and add this line
.long sys_add2 /* my code */
CONT….
CONT….
2. Now open arch/x86/include/asm/unistd_32.h and find out
#define __NR_prlimit64 340
Add a new line after this: #define __NR_add2 341
Don’t just close yet. After 3-4 lines, you will find a line like
CONT….
#define NR_syscalls 341 Change it to
#define NR_syscalls 342.3. Now edit
arch/x86/include/asm/unistd_64.h
Find out: #define __NR_prlimit64 302__SYSCALL(__NR_prlimit64,sys_
prlimit64)
CONT….
Now after these two lines, add these two lines
#define __NR_add2 303
__SYSCALL(__NR_add2, sys_add2)
4. Now again in the source folder you will find a folder named include. Open the file include/linux/syscalls.h and go to the end of the file. Before the line
CONT…
#endifwrite this prototype definition line:asmlinkage long sys_add2(int
i,int j);
5. Now find out the kernel folder in the source directory. Create a new empty file in the kernel folder with the name “mysysteamcalls.c” . Add the following codes in the file:
CONT…
#include<linux/linkage.h>asmlinkage long sys_add2(int i,int j){ return i+j;}
6. Now open the Makefile in this folder(/kernel/Makefile) and find out
obj-y += groups.o
CONT…
Add a new line before this line : obj-y += mysysteamcalls.o
Ok, this is the edit you need to do to add a new system call. Now compile or recompile the source code and enjoy your new system call.
sample code to call the system call :#include <stdio.h>#include <linux/unistd.h>#include <sys/syscall.h> //comment the following line if you are
using 64 bit, this number is the same used previously
#define sys_add2 341 //comment the following line if you are
using 32 bit, this number is the same used previously
#define sys_add2 303
CONT…
int main(void){ int a,b,c; printf("Adding Two Numbers in Kernel Space\n"); printf("Input a: "); scanf("%d",&a); printf("Input b: "); scanf("%d", &b); c = syscall(sys_add2, a, b); printf("System call returned %d\n", c); return 0;}
How to replaces new kernel file with old Kernel File:
download the kernel from kernel.org http://www.kernel.org/pub/linux/
kernel/v3.0/linux-3.X.tar.bz2Extract the tarball to /usr/src/linux-
3.X/tar -xvf linux-3.X.tar.bz2 -C
/usr/src/linux-3.X/Change the directory to
/usr/src/linux-3.x$ cd /usr/src/linux-3.x
CONT…Configure Lets configure our new Linux Kernel with the
configuration of old kernel (which is already installed in our machine)
$ sudo make oldconfig
The new kernel is installed, however we need to say to the Ubuntu to use this new one. Just type in the shell:
sudo update-initramfs -k 2.6.38.3 -u sudo update-grub
Restart your computer. After loaded, type in the shell:
uname -a
.deb Fileslinux-headers-2.6.34-02063415_2.6.34-
02063415.201402101835_all.deblinux-headers-2.6.34-02063415-
server_2.6.34-02063415.201402101835_amd64.deb
linux-image-2.6.34-02063415-generic_2.6.34-02063415.201402101835_amd64.deb
sudo dpkg -i linux*2.6.34-7.37*.deb sudo reboot
Refrences:
http://www.kernel.orghttp://www.Ubuntu.comkernel.ubuntu.com/~kernel-ppa/mainline/
https://wiki.ubuntu.com/Kernel/MainlineBuilds
ubuntuforums.orgwww.ubuntu.com/support/
communityhttp://www.linuxquestions.org
Thank you