How Does A Crank Sensor Work

24

Transcript of How Does A Crank Sensor Work

Page 1: How Does A Crank Sensor Work
Page 2: How Does A Crank Sensor Work

A crankshaft position sensor helps the engine to keep running smoothly.

Page 3: How Does A Crank Sensor Work

It also measures the position and the rotational speed of the sensor to estimate the exact time for fuel delivery.

Page 4: How Does A Crank Sensor Work

Most of the vehicle uses the combination of the crankshaft with camshaft sensor to get a better information on fuel requirement of

the engine.

Page 5: How Does A Crank Sensor Work

The engine control unit uses the information from the crankshaft to control

the timing of ignition and fuel injection.

Page 6: How Does A Crank Sensor Work

It helps the engine to maintain all the parts in a well timed manner to deliver a smooth operation of the engine.

Page 7: How Does A Crank Sensor Work

Where is the Crankshaft Position Sensor Located?

Page 8: How Does A Crank Sensor Work

The location of crankshaft sensor varies from vehicle to vehicle.

Page 9: How Does A Crank Sensor Work

In most vehicles, it is located on the front underside of the engine.

Page 10: How Does A Crank Sensor Work

In some vehicles, it is found near to the timing

cover.

Page 11: How Does A Crank Sensor Work

In some vehicles, it is mounted at the rear or the side of the

engine.

Page 12: How Does A Crank Sensor Work

Sometimes the sensor is mounted to

the bell housing of the transmission.

Page 13: How Does A Crank Sensor Work

If the sensor is near to the transmission, it measures the speed of the clutch flywheel to

determine the speed of the crankshaft.

Page 14: How Does A Crank Sensor Work

What are the different types of crankshaft sensor?

Page 15: How Does A Crank Sensor Work

There are 4 types of crankshaft sensor found in vehicles. :- A magnetic pickup coil

:- A hall effect sensor :- A magneto resistive element

:- An optical sensor.

Page 16: How Does A Crank Sensor Work

The magnetic pickup coil, Hall-effect sensor and magneto use metal teeth on the wheel that helps to

create the signals for the ECM to read.

Page 17: How Does A Crank Sensor Work

The optical position sensor uses a LED light to send the information to the ECM.

Page 18: How Does A Crank Sensor Work

This information is only good for high and low-speed vehicles. If the sensor is dirty, it gives inaccurate information that causes

the vehicle to run poorly.

Page 19: How Does A Crank Sensor Work

What are the symptoms of a bad crankshaft sensor?

Page 20: How Does A Crank Sensor Work

:- Acceleration problem :- Reduced gas mileage

:- Engine misfire :- Rough Idle

:- Stalling :- Starting problem etc.

Page 21: How Does A Crank Sensor Work

Why the sensor fails?

Page 22: How Does A Crank Sensor Work

There are few causes that affect the crankshaft sensor. They are

Page 23: How Does A Crank Sensor Work

:- Wheel and pin damage :- Magnetic problems

:-circuitry and wiring problems etc.