How are Liquid Shredder · Quality Control Specialist How are Liquid Shredder SUP & Surf Boards...
1
Suntech Fins Polycarbonate and fiber. System compatible FCS on Suntech Series Surf and SUP Boards Deck protection underlament resists heel, elbow and knee denting Electro-sealed skin seams can never unglue Anti-Delamination Vinyl: (ADV) -Hi-Tec patented outer skin looks like fiberglass. ADV is lighter, tougher and easier to repair than epoxy fiberglass. The ADV skin is highly UV resistant and color fast even after years in the sun. Reinforced Vinyl Bottom: With flexible 0.6mm thickness is resistant to damage and ealy to repair. Dual Aluminum Stringer (DAS CF) Stringer is a revolutionary design; much lighter and stronger than any other similar weight stringer system (patented) X-EPS foam Does not absorb water, is SEALED cell Anti-Delamination Vent: Our Goretex Microfiber vent equalizes pressure that expands or contracts with abrupt changes in temperature. Never experience catastrophic delamination again. Anti-Slip Soft EVA Deck Is standard equipment on SUPs and optional on surfboards Serial Number identifies: 1 Production Date 2 Model and Color Table 3 Name of Your Quality Control Specialist How are Liquid Shredder SUP & Surf Boards Made? PVC Rail Protection: Corrugated Liquid Shtredder models and simulated Composite on LS Suntech models Sunset Fins Polyethylene Nylon Screw System Mate with LS Water hull seals SUNSET® SUNSET SUNSET Green Construction All Peruvian model Liquid Shredder and LS Suntech Surf and SUP Boards are made from X-EPS organic sealed cell foam with a special heat sealed vinyl skin. This patented Hi-Tech structure is reinforced with a dual aluminum / fiberglass and carbon stringer system for high strength, rigidity and durability. The construction of these Peruvian made boards are unique and completely different from those of fiber and sponge. With reasonable care they will last much longer than those older technologies and provide many years of fun in the sun.
Transcript of How are Liquid Shredder · Quality Control Specialist How are Liquid Shredder SUP & Surf Boards...
Suntech FinsPolycarbonate andfiber. SystemcompatibleFCS on SuntechSeries Surf andSUP Boards
Deck protection underlament resists heel, elbow and knee denting
Electro-sealed skin seams can never unglue
Anti-Delamination Vinyl:(ADV) -Hi-Tec patented outer skin looks like fiberglass. ADV is lighter, tougher and easier to repair than epoxy fiberglass. The ADV skin is highly UV resistant and color fast even after years in the sun.
Reinforced Vinyl Bottom:With flexible 0.6mm thickness is resistant to damage and ealy to repair.
Dual Aluminum Stringer (DAS CF)Stringer is a revolutionary design;much lighter and stronger than any other similar weight stringer system (patented)
X-EPS foamDoes not absorb water, is SEALED cell
Anti-Delamination Vent:Our Goretex Microfiber vent equalizes pressure that expands or contracts with abrupt changes in temperature. Never experience catastrophic delamination again.
Anti-Slip Soft EVA Deck Is standard equipment on SUPs and optional on surfboards
Serial Number identifies:
1 Production Date2 Model and Color Table3 Name of Your Quality Control Specialist
How are Liquid ShredderSUP & Surf Boards Made?
PVC Rail Protection:Corrugated Liquid Shtredder models and simulated Composite on LS Suntech models
Sunset FinsPolyethyleneNylon ScrewSystemMate with LSWater hull seals
SUNSET®
SUNSET
SUNSET
Green Construction
All Peruvian model Liquid Shredder and LS Suntech Surf and SUP Boards are made from X-EPS organic sealed cell foam with a special heat sealed vinyl skin. This patented Hi-Tech structure is reinforced with a dual aluminum / fiberglass and carbon stringer system for high strength, rigidity and durability. The construction of these Peruvian made boards are unique and completely different from those of fiber and sponge. With reasonable care they will last much longer than those older technologies and provide many years of fun in the sun.
