Research Article Functional and Structural Details about ...
House Structural Details
3
SCOTTSDALE CONSTRUCTION SYSTEMS Phone: +64 21 953 343, 17 Cadbury Rd, Onekawa Napier 4110, New Zealand Email: [email protected] www.scottsdalesteelframes.com House Structural Details ⇒ General Notes: Five storey residential building. Two Bedrooms, two bathroom/en-suit Apartments each floor. Light Roof Structure. ⇒ Building Specification > 5 Storey Structure Ground Floor Level 0 First Floor Level 1 Second Floor Level 2 Third Floor Level 3 Fourth Floor Level 4 Supporting Frames and Ceiling Level 5 Flat Roof Level 5 > Estimate Area of Building Width 14,170m Length 25,870m Floor Height 3,150m > Typical Floor Area Level 0 to Level 4 328m 2 Building Total Floor Area 1640m 2 Panels Engineering In ScotSteel Software Walls, Floors, Roofs and Ceiling Panels are specially design to achieve the minimum material usage. ⇒ Design of Structural Frames. TYPICAL FLOOR ELEVATION
Transcript of House Structural Details
SCOTTSDALE CONSTRUCTION SYSTEMS Phone: +64 21 953 343, 17 Cadbury Rd, Onekawa Napier 4110, New Zealand Email: [email protected] www.scottsdalesteelframes.com
House Structural Details
⇒ General Notes:
Five storey residential building. Two Bedrooms, two bathroom/en-suit
Apartments each floor. Light Roof Structure.
⇒ Building Specification
> 5 Storey Structure Ground Floor Level 0
First Floor Level 1
Second Floor Level 2
Third Floor Level 3
Fourth Floor Level 4
Supporting Frames and Ceiling Level 5
Flat Roof Level 5
> Estimate Area of Building
Width 14,170m
Length 25,870m
Floor Height 3,150m
> Typical Floor Area
Level 0 to Level 4 328m2
Building Total Floor Area 1640m2
Panels Engineering
In ScotSteel Software Walls, Floors, Roofs and Ceiling Panels are specially design to achieve the minimum material usage.
⇒ Design of Structural Frames.
TYPICAL FLOOR
ELEVATION
SCOTTSDALE CONSTRUCTION SYSTEMS Phone: +64 21 953 343, 17 Cadbury Rd, Onekawa Napier 4110, New Zealand Email: [email protected] www.scottsdalesteelframes.com
⇒ Structural Design and 3D Modelling in Scottsdale ScotSteel Software
⇒ Steel Usage Tables from ScotSteel
The Steel usage report is found in ScotSteel in the Menu Project when the design is completed.
Also precise simulation in ScotRF-Panel Software helps to eliminate any discrepancies or small mistakes and estimate steel material usage.
Producing Steel Frames
STRUCTURAL FRAMES READY FOR PRODUCTION
SCOTTSDALE CONSTRUCTION SYSTEMS Phone: +64 21 953 343, 17 Cadbury Rd, Onekawa Napier 4110, New Zealand Email: [email protected] www.scottsdalesteelframes.com
RF Type/ Profile
Width
RF700-90
Level 5 SCS Steel 90x0.75mm 3060 m 3.370
Total Steel 3060 m 3.370 tones
T. Floor Area 328 sqm
Roof and
CeilingTotal Linear Metres /Total Floor Area 9.33 m/sqm
Roof and
CeilingTotal Tonnage/Total Floor Area
10.275 kg/sqm
Level 4 SCS Steel 90x0.55mm 4094 m 3.307
Total Steel 4094 m 3.307 tones
T. Floor Area 328 sqm
Walls Total Linear Metres /Total Floor Area 12.48 m/sqm
Walls Total Tonnage/Total Floor Area 10.081 kg/sqm
Level 3 SCS Steel 90x0.75mm 3095 m 3.409
Level 2 SCS Steel 90x1.0mm 3095 m 4.318
Level 0-1 SCS Steel 140x1.2mm 6346 m 14.991
Total Steel 12536 m 22.717 tones
T. Floor Area 1312
Walls Total Linear Metres /Total Floor Area 9.55 m/sqm
Walls Total Tonnage/Total Floor Area 17.315 kg/sqm
Level 1-4 SCS Steel 90x0.75mm 11583 m
Total Steel 11583 m 12.757 tones
T. Floor Area 1312 sqm
Floors Total Linear Metres /Total Floor Area 8.83 m/sqm
Floors Total Tonnage/Total Floor Area 9.723 kg/sqm
1
2
3
4 Floors
Walls
GroupSteel Usage in
Linear Meters
Steel Usage in
Tones
Roof and Ceiling
Walls
Estimate of Steel Usage
Roof and Ceiling
Level 5
Walls
Four Floor
Level 4
Walls
First to Third Floors
Level 0-3
Floors
First to Fourth Floors
Level 1-4
