HOUSE OF NATURAL MINERALS LLC
Transcript of HOUSE OF NATURAL MINERALS LLC
PRODUCT SPECTRUM
Metals & Minerals➢ Chrome Ore
➢ Manganese ore
➢ Iron Ore Fines
➢ Aluminum Ingots
Petro & Petro Chemicals ➢ Paraffin Wax
➢ PVC RESIN
➢ BITUMEN
➢ HDPE PELLETS
➢ BASE OIL
Non Metallic Ore➢Lime Stone
➢Dolomite
➢Gypsum
➢Rock Phosphate
Other Export & Import➢ Clinker
➢ Metal Scraps
➢ Alumina
➢ Sugarcane Molasses
➢ Micro Silica
➢ POP
The primary use (70%) of asphalt is in
road construction, where it is used as
the glue or binder mixed with
aggregate particles to create asphalt
concrete. Its other main uses are for
bituminous waterproofing products,
including production of roofing felt
and for sealing flat roofs.
QUALITY / SPECIFICATION
Penetration Grade-ASTM / AASHTO
40-50 60-70 85-100 120-150 150-200 200-300
Density @ 250C kg/m 1010-1016 1010-1060 1000-1050 1000-1050 1000-1050 990-1040 ASTM D70 ON D3289
Penetration @ 250C mm/10 40-50 60-70 85-100 120-150 150-200 200-300 ASTM D5
Softening point C 49 max 46 min 42 min 38 min 36 min 32 min ASTM D36
Ductility @ 250C cm 100 max 100 min 100 min 100 min 100 min 100 min ASTM D113
Loss on heating wt% 0.2 max 0.2 max 0.5 max 0.5 max 0.5 max 1 max ASTM D6
Drop in penetration after heating % 20 max 20 max 20 max 20 max 20 max 37 min ASTM D5
Flash point C 232 min 232 min 232 min 218 min 218 min 177 min ASTM D92
Solubility Trichloroethylene wt% 99.0 min 99.0 min 99.0. min 99.0 min 99.0 min 99.0 min ASTM D2042
Spot test … negative negative negative negative negative negative AASHTO T 102
Viscosity @ 600C p 4000+ 800 2000+400 1000 + 200 450+90 250+50 200+50 ASTM D 2171
Viscosity @ 1350C cSt 400 min 300 min 250 min 170 min 150 min 80 min ASTM D 32170
Test on Residue from Thin Film Oven Test(ASTM D1754)
Retained Penetration after
(T.F.O.T).%% 58 min 54 min 50 min 46 min 46 min 40 min ASTM D5
Ductility (25C).5cm/min.cm after
TFOTcm 50 50 75 100 1000 1000 ASTM D113
Viscosity @ 600C P 20000 max 10000 max 5000 max 2250 max 1250 max ASTM D 2171
PARAFFIN- WAX
Paraffin wax is a white or colorless
soft, solid wax. It's made from
saturated hydrocarbons. Apart from
various industrial application, It's often
used in skin-softening salon and spa
treatments on the hands, cuticles, and
feet because it's colorless, tasteless,
and odorless. It can also be used to
provide pain relief to sore joints
and muscles.
HNM
Analysis of semi refined paraffin wax 0.5-7% oil content
Light grade
Specification Test method Results
Oil content ASTM D-721 2.50%
Melting point ASTM D-87-09 60 ˚C
SP.gr 60 °F ASTM D-2726 0.8 gr/cm3
Colour ASTM D-1500 White
Flash point ASTM D-93-13 300 ˚C
Heavy grade
Specification Test method Results
Oil content ASTM D-721 2.30%
Melting point ASTM D-87-09 62 ˚C
SP.gr@60 °F ASTM D-2726 0.83 gr/cm3
Colour ASTM D-1500 White
Flash point ASTM D-93-13 > 250 ˚C
QUALITY / SPECIFICATION
PVC RESIN
Economical, versatile poly vinyl
chloride (PVC, or vinyl) is used in a
variety of applications in the building
and construction, health care,
electronics, automobile and other
sectors, in products ranging from
piping and siding, blood bags and
tubing, to wire and cable insulation,
windshield system components and
more
PropertyUnit of
measurementRigid PVC Flexible PVC
Density g/cm3 1.3–1.45 1.1–1.35
Thermal conductivity W/(m·K) 0.14–0.28 0.14–0.17
Yield strengthpsi 4,500–8,700 31–60
MPa 1,450–3,600 10.0–24.8
Young's moduluspsi 490,000 —
GPa 3.4 —
Flexural strength (yield)psi 10,500 —
MPa 72 —
Compression strengthpsi 9,500 —
MPa 66 —
Coefficient of thermal
expansion (linear)mm/(mm °C) 5×10−5 —
Vicat B °C 65–100 ---
Resistivity Ω m 1016 1012–1015
Surface resistivity Ω 1013–1014 1011–1012
QUALITY / SPECIFICATION
HDPE PELLETS
With a high strength-to-density ratio,
HDPE is used in
the production of plastic bottles,
corrosion-resistant piping, geo-
membranes and plastic lumber.
HDPE is commonly recycled, and
has the number "2" as its resin
identification code
Feature Test method Unit Polietiten 1000 Polietiten 500 Polietiten 300
Intensity DIN 53479 gr/cm3 0.93-0.94 0.94-0.96 0.95-0.96
Molecular weight DIN-53728-T gr/mol >4.000.000 500 300
Notched impact strength DIN 53453 kj/m2 Unbroken Unbroken 12
Charpy notched impact strength ISO 11542/2 kj/m2 >210 >25 -
Tensile strength DIN 53455 kj/cm2 250 250 250
Extend Rupture DIN 53455 % >300 >500 >500
Stiffness DIN 53505 Shore-D 60-68 60-68 60-65
Operating temperature Max 0C 90 80 80
Melting point ISO 3146 0C -269 -100 -50
Linear expansion coefficient DIN 53752 0C-1 130-180 130-138 127-131
Water absorption ASTM D570 & 2X104 2X104 2X104
Friction coefficient ASIL 0.1-0.15 0.15-0.20 0.20-0.25
Dielectric strength DIN 53481 KV/cm 900 900 700
QUALITY / SPECIFICATION
CHROME ORE
The chromium extracted from
chromite is used in chrome
plating and alloying
for production of corrosion
resistant super alloys, nichrome,
and stainless steel. Chromium is
used as a pigment for glass,
glazes, and paint, and as an
oxidizing agent for tanning
leather.
PARAMETERS RANGE LOW
GRADE
MEDIUM
GRADE HIGH GRADE
Cr2O3 Quality 24-34% 36-40% 40-44% 40-44% 40-42%
SiO2 MAX 15-18% 12-15% 6-10% 6-10% 8%
P MAX 0.01% 0.01% 0.01% 0.01% 0.01%
S MAX 0.01% 0.01% 0.01% 0.01% 0.01%
Al2O3 MAX 15-22% 15-22% 8-10% 8-12% 10-12%
MgO MAX 20-26% 18-24% 22-26% 20-23% 15-20%
Cr:Fe Ratio MIN 1.4/2.1:1 2.2/2.4:1 2.4/2.9:1 2.5/2.9:1 1.2/1.4:1
SIZE MIN 10-300 MM 80% 0-1 MM 90%
QUALITY / SPECIFICATION
MANGANESE ORE
Most of the manganese produced is
used in the form of ferromanganese
and silico manganese alloys
for iron and steel manufacture.
Manganese ores containing iron
oxides are first reduced in blast
furnaces or electric furnaces with
carbon to yield ferromanganese,
which in turn is used in steelmaking.
PARAMETERS RANGE LOW
GRADE
MEDIUM
GRADE HIGH GRADE
Mn Quality 30-34% 35-39% 44-50% 48-50%
SiO2 MAX 10-16% 6-12% 6-12% 10-18%
P MAX 0.06-0.15% 0.04-0.16% 0.25% <0.001%
S MAX 0.05% <0.01 <0.01 <0.01%
Al2O3 MAX 6-8% 2-8% 6-14% 1.5-2.5%
Fe MAX 9-13% 5-16% 3-8% 4%
MgO MAX 0.10%
SIZE MIN 6.5-80 MM 70% 10-150 MM 10-100 MM
QUALITY / SPECIFICATION
ROCK PHOSPHATE
Approximately 90% of rock
phosphate production is used
for fertilizer and animal feed
supplements and the balance for
industrial chemicals food
preservatives, baking flour,
pharmaceuticals, anticorrosion
agents, cosmetics, fungicides,
insecticides, detergents, ceramics,
water treatment and metallurgy.
Product Rock Phosphate
Origin Mozambique Senegal Egypt Algerian
Total Phosphate (P2O5) 36.5 35 29.50-30.00 30.22
BPL 79.76 76.5 65 66.05
H2O 1.5 to 1.8 5 4 to 6 1 to 2
SILICA SIO2 1.8 to 2.0 10.8 7 to 9 2.1
Magnesium oxide (MGO) 0.8 to 1.2 0.3 0.35 to 0.45 0.85
Carbon Dioxide (CO2) 3.0 to 3.6 5 5.00 to 5.50 6.3
Chlorides - - 0.04 to 0.07 -
Aluminium Oxide (Al2O3) 0.16 to 0.18 4.8 0.35 to 0.55 0.4
Iron (Fe2O3) 0.4 to 0.7 2.2 2.00 to 2.50 0.39
Cd (ppm) - 50 - -
Calcium Oxide (CAO) 51 to 54 54.4 47 to 49 50.78
Sulphate (SO4) - 0.08 - -
SO3 - - - 2.95
Fluoride (F) 2.2 to 2.4 4 2.50 to 3.50 3.8
Sodium Oxide (Na2O) - 0.12 0.35 to 0.065 1.1
Potassium Oxide (K2O) - 0.17 0.05 to 0.065 0.1
C org - 0.2 0.15 to 0.25 0.18
QUALITY / SPECIFICATION
LIME STONE
Limestone has numerous uses: as
a building material, an essential
component of concrete (Portland
cement), as aggregate for the base of
roads, as white pigment or filler in
products such as toothpaste or paints, as
a chemical feedstock for the production
of lime, as a soil conditioner, and as a
popular decorative addition to rock
gardens.
SL NO. PARAMETER VALUE (APPROX)
1 CaCO3 98.50%
2 MgO 0.16%
3 Fe2O3 0.01%
4 Al2O3 0.05%
5 SiO2 0.08%
6 Na2O 0.16%
7 Brightness 94%
8 Whiteness 97%
9 Oil Absorption 24g/100g CaCO3
10 Content LOI 43.08%
QUALITY / SPECIFICATION
ALUMINIUM INGOTS
Aluminum ingot is the main raw
material for producing aluminum
products. It is an environment-
friendly metal with heat and electric
conductivity, light, corrosion-
resisting, & malleable. Its used
widely in sectors like construction,
electricity, packaging, transportation
and daily consumption products.
The ingots are flattened into thin
sheets, which are then used for
various applications
Chemical Composition %
Grade Al ≥Impurities ≤
Si Fe Cu Ga Mg Zn others Sum
AL99.9 99.9 0.5 0.07 0.005 0.02 0.01 0.025 0.01 0.1
AL99.85 99.85 0.8 0.12 0.005 0.03 0.02 0.03 0.015 0.15
AL99.7 99.7 0.1 0.2 0.01 0.03 0.02 0.03 0.03 0.3
AL99.6 99.6 0.16 0.25 0.01 0.03 0.03 0.03 0.03 0.4
AL99.5 99.5 0.22 0.3 0.02 0.03 0.05 0.05 0.03 0.5
AL99.00 99 0.42 0.5 0.02 0.03 0.05 0.05 0.05 1
QUALITY / SPECIFICATION
DOLOMITE
Dolomite is used as a source of
magnesia (MgO), a feed additive
for livestock, a sintering agent and
flux in metal processing, and as an
ingredient in
the production of glass, bricks,
and ceramics. Dolomite serves as
the host rock for many lead, zinc,
and copper deposits.
Dolomite : Oxide and Mineralogical Analysis
Property Symbol Method Min. % Typical % Max %
Silicon Dioxide SiO2
A
S
T
M
C
2
5
0.1 0.5 1
Iron Oxide Fe2O2 0.09 0.14 0.2
Aluminium Oxide Al2O3 0.03 0.05 0.1
Sulphur S 0.004 0.005 0.008
Manganese Oxide MnO 0.03 0.04 0.05
Calcium Oxide CaO 30.2 31.2 31.9
Magnesium Oxide MgO 20.3 20.8 21.3
Calcium Carbonate CaCO2 54.9 55.6 56.7
Magnesium Carbonate MgCO2 42.4 43.5 44.6
QUALITY / SPECIFICATION
GYPSUM
Gypsum uses include:
manufacture of wallboard,
cement, plaster of Paris, soil
conditioning, a hardening retarder
in Portland cement. Varieties
of gypsum known as "satin spar"
and "alabaster" are used for a
variety of ornamental purposes;
however, their low hardness limits
their durability.
TECHNICAL SPECIFICATION OF GYPSUM
Chemical Parameters Specification Rejection limits
CaSO4.2H2O 92 % -Min Less than 90 %
Moisture (Free Water) 2 % Max More than 3 %
Calcium Oxide(CaO) 31 % (MIN)
Sulphur(SO3) 42.00 % (MIN)
Combined water 18.5 % (MIN)
MgO 2 % (MAX)
Iron Oxide-Fe2O3 0.10%
QUALITY / SPECIFICATION
BASE OIL
Base oil is used to manufacture
products including lubricating greases,
motor oil and metal processing fluids.
Different products require different
compositions and properties in the oil.
One of the most important factors is
the liquid's viscosity at various
temperatures.
Item Test MethodSN 500 SN 150
Typical Spec Typical Spec
Appearance (Room Temp) Visual B&C B&C
Density @ 15°C ASTM D-1298 0.873 0.853
Colour ASTM D-1500 0 0
Kinematic viscosity @40°C C,st ASTM D-445 84.4 28.7
Kinematic viscosity @40°C C,st ASTM D-445 10.1 5.17
Viscosity Index ASTM D-2270 100 110
Pour Point °C ASTM D-97 -15 -18
Flash Point , CCC, °C ASTM D-92 252 220
Sulphur,(% wt) ASTM D-4294 <0.001 <0.001
Copper Corrosion ASTM D-130 Max 1a Max 1a
Total Acid No., Mg KOH/g ASTM D-974 < 0.05 <0.05
Con. Carbon Residue, wt % ASTM D-189
Noak Volatility, wt % ASTM D-5800 2 10
QUALITY / SPECIFICATION