Hot water middle classHDS 6954 M Eco - VESKOvesko.net/pdf/kaercher/1.025-315.0.pdf · Hot water...
Transcript of Hot water middle classHDS 6954 M Eco - VESKOvesko.net/pdf/kaercher/1.025-315.0.pdf · Hot water...
Hot water middle classHDS 6954 M Eco
OverviewThe new generation Eco Line of medium andheavyduty machines combines innovativeengineering with a maximum of userconvenience, economy and a long service life,even under very demanding operating conditions.
Order no. 1.025315.0
Standard accessoriesTrigger gun, Trigger gun with soft grip, Powernozzle, Servo Control, Pivoting
Technical dataVoltage V 400Water flow rate l/h 400800Pressure bar/MPa 30170/317Max. Temperature (feed 12°C) °C
Max.155Max.80
Connected load kW 6,4Consumption light fuel oil kg/h 5,2Fuel tank l 25Weight kg 117Dimensions (L x W x H) mm 1285 x 690 x 835Detergent tank l 20
ApplicationFor mediumsized shops in the car business For car washes For chassis washing For enginewashing For the prewash in car washes General cleaning tasks in the industry, municipalitiesand agriculture
Features & Benefits4pole eletric motor Water cooled 4pole eletric motor 1400 rpm delivers preheated water, highpressure pump fuel pump and blower driven by single shaft. Result high efficiency and longlasting time Chimney outlet cover Made of stainlesssteel integrated in the unit cover EasyPress trigger gun Ergonomical designed trigger gun with soft grip inlay and reduced holding andtrigger force for fatigue free working in long terms Exhaust gas temperature sensor The exhaust
© 2007 Alfred Kärcher GmbH & Co. KG 1 / 18
Hot water middle classHDS 6954 M Eco
gas temperature sensor which is integrated in the chimnes switches off the electirc motor whenthe exhaust gas temperature exceeds 300°C. Additional working safety for the user in case ofburner malfunctions. Finemesh water filter With transparency housing, integrated on floattank,Safe protection of the highpressure components against dirt and particles in the feed water forhigher service life time Low fuel cutout The unit shuts down automatically when the tank isempty. No risk of residual oil igniting unintentionally Servo Control Sensitive user friendlypressure/ water flow adjustment through the servopress control direct on the trigger gun Softdamping system (SDS) A special high pressure hose (recognisable by the yellow colour and theSDSlabelling) between the safety device and the highpressure pump eliminates / compensatesthe arising vibrations in the highpressure system by factor 2,5 Threepiston axial pump withceramic pistons Guarantees long service life
Absperrhahn Shutoff cock Order no. 4.580160.0
Abstandhalter (inkl. Düsenverschraubung Spacer (incl.nozzle union)Guarantees constant safety clarance, e.g. for tyres and bodywork. Helpsprevent damage to sensitive surfaces. Mounts directly to lance.Order no. 5.394294.0
Adapter für Druckregelstrahlrohr Adapter for variable pressure spray lanceFor items 9, 10, for mounting accessories to lance, M 24/18 x 1.5Order no. 4.762075.0
© 2007 Alfred Kärcher GmbH & Co. KG 2 / 18
Hot water middle classHDS 6954 M Eco
Boron carbide nozzle Boron carbide nozzle(In addition to nozzle packs. Very wearresistant nozzle for continuousdutyoperation.)Order no. 6.415084.0
Crane lifting kit Crane lifting kitEffortless handling by crane.Order no. 2.638900.0
Düsenschutz Nozzle protector (rubber)for steam nozzles 4766023 and 4766024.Order no. 5.394059.0
Düsenverschraubung Nozzle unionWith protector for highpressure and Power nozzles.Order no. 5.401210.0
Detergent injector (without nozzle) Detergent injector (without nozzle)Adds detergent in high and low pressure modes independent of machine.Dosage up to 15%Order no. 3.637001.0
© 2007 Alfred Kärcher GmbH & Co. KG 3 / 18
Hot water middle classHDS 6954 M Eco
Dirt Blaster, changeover Dirt Blaster, changeoverchangeover to highpressure fan jetOrder no. 4.763957.0
Dirt Blaster, not adjustable Dirt Blaster, without changeoverCeramic nozzle and bearing ringOrder no. 4.763252.0
Easy Foam Set Easy Foam SetComplete, readytouse HP foam system for use with. HD/HDS units forcleaning and disinfecting. Foam nozzle for connection to lance and HPchemical injector with precision 05% metering valve.Order no. 2.640693.0
Fine mesh water filter Fine mesh water filterMounted to machine inlet, 80 ømOrder no. 4.730102.0
Fine mesh water filterMounts to machine inlet 150 ømOrder no. 2.638270.0
Fine mesh water filterMounts to machine, suitable for suction mode, 150 ømOrder no. 2.638255.0
© 2007 Alfred Kärcher GmbH & Co. KG 4 / 18
Hot water middle classHDS 6954 M Eco
Floor and hard surface cleaners Hard surface cleaner FR 50 Order no. 2.640679.0
Surface cleaner, 300 mm diameterA rotating nozzle beam with Kärcher Power nozzles has an area coverage upto 10 times larger than conventional methods. Stainless steel version. Ceramicbearings. Integral vacuum connection.Order no. 2.640355.0
Nozzle set, for surface cleaning (model specific)for item 2.638831 and 2.640355Order no. 2.639187.0
Foam nozzle mounting kit Anbausatz SchaumdüseFor applying foam detergent in metered quantities in sanitary and food areas,or where long reaction time is necessary, mounts to spray lance in place of HPnozzleOrder no. 2.637926.0
Geka coupling Geka couplingwith female threadOrder no. 6.388458.0
Geka couplingwith hose linerOrder no. 6.388455.0
© 2007 Alfred Kärcher GmbH & Co. KG 5 / 18
Hot water middle classHDS 6954 M Eco
High pressure hoses Highpressure hose, 20 m, DN 8, PN 160 bar, AVS gun connectionFood industry version, AVS connection in trigger gun grey ID 8/155°C/160 barOrder no. 6.390705.0
Highpressure hose, 10 m, DN 8, PN 160 bar, AVS gun connectionFood industry version, AVS connection in trigger gun grey ID 8/155°C/160 barOrder no. 6.390704.0
Highpressure hose 20 m, DN 8, AVS gun connectionLonglife 400 with patented AVS connection in trigger gun (pivot mounted) ID8/155°C/400 barOrder no. 6.390208.0
Highpressure hose 20 m, DN 8, PN 200 barWith M 22x1.5 union at both ends and antikink protection ID 8/155°C/315 barOrder no. 6.390031.0
Highpressure hose 20 m, DN 10, PN 400 barLonglife 400, With rotary coupling 2 x M22 x 1.5, ID 8/155°C/400 barOrder no. 6.390027.0
Highpressure hose 10 m, DN 10, PN 400 barLonglife 400, Without rotary coupling 2 x M22 x 1.5, ID 8/155°C/400 barOrder no. 6.390026.0
Highpressure hoseWith M 22x1.5 union at both ends and antikink protection ID 10/155 °C/220barOrder no. 6.390023.0
© 2007 Alfred Kärcher GmbH & Co. KG 6 / 18
Hot water middle classHDS 6954 M Eco
Highpressure hoseWith M 22x1.5 union at both ends and antikink protection ID 8/155 °C/315 barOrder no. 6.390010.0
Highpressure hose 10 m, DN 8, PN 200 barWith M 22x1.5 union at both ends and antikink protection ID 8/155°C/315 barOrder no. 6.389891.0
Highpressure hose 10 m, DN 8, AVS gun connection, longlifeLonglife 400 with patented AVS connection in trigger gun (pivot mounted) ID8/155 °C/400 barOrder no. 6.389856.0
Highpressure hose, 20 m, DN 8, PN 180 bar, food versionFood industry version with M 22x1.5 union at both ends, antikink protection, ID8, with rotary coupling, for food industry, up to 230 barOrder no. 6.389581.0
Highpressure hoseFood industry version with M 22x1.5 union at both ends, antikink protection, ID8, with rotary coupling, for food industry, up to 230 barOrder no. 6.389479.0
Highpressure hose, 10 m, DN 8, incl. swivelling jointLonglife 400, With rotary coupling 2 x M22 x 1.5, ID 8/155°C/400 barOrder no. 6.388083.0
Hose reel mounting kit Hose reel mounting kit Order no. 2.637998.0
© 2007 Alfred Kärcher GmbH & Co. KG 7 / 18
Hot water middle classHDS 6954 M Eco
HP 0° nozzle pritzwinkel 0° Order no. 2.884536.0
HP 40° nozzle pritzwinkel 40° Order no. 2.884524.0
HP detergent injector HP detergent injectorAdds up to 5% detergent in highpressure modeOrder no. 3.637170.0
Inno Foam Set Inno Foam SetComplete, readytouse HP foam system for use with mobile and stationaryHD/HDS units for cleaning and disinfection. Twin spray lance with foam nozzleand changeover to HP jet for clear rinsing etc., HP chemical injector withprecision 05% metering valve.Order no. 2.640692.0
Installationsmaterial Rotating jointReliably prvents HP hose twisting. M 22x1.5 connection with protectorOrder no. 4.401076.0
© 2007 Alfred Kärcher GmbH & Co. KG 8 / 18
Hot water middle classHDS 6954 M Eco
Kugeldüsenträger Rollover nozzle holderChanges from solid to fan jet with flick of the wrist. Knurled nut for changeoverto low pressure chemical intake, without nozzles (order Kärcher Power nozzleseparately)Order no. 4.764012.0
Kupplung Double pipe unionFor connecting and extending HP hoses. 2 x M22 x 1,5 connections, brass withrubber protectorOrder no. 4.403002.0
Machinespecific nozzle kit Machinespecific nozzle kitdetergent injector + HP nozzle + unionOrder no. 4.769047.0
Mounting kit for 2nd detergent tank Mounting kit for 2nd detergent tankMounting kit integrated in machineOrder no. 2.638235.0
Nozzle insert (for position 3.637001) Nozzle insert (for position 3.637001)For low pressure.Order no. 4.769006.0
© 2007 Alfred Kärcher GmbH & Co. KG 9 / 18
Hot water middle classHDS 6954 M Eco
Nozzle insert (for position 3.637001)For high pressure.Order no. 4.769002.0
Nozzle kit for HKF 50 spray head HKF 50 spray headNozzle kit for items 3.631039 and 3.631009. 2nozzleOrder no. 6.415444.0
HKF 50 spray headNozzle kit for items 3.631039 and 3.631009. 1 nozzleOrder no. 6.415077.0
Screw plugScrew plug. For operating spray head with one nozzleOrder no. 5.411061.0
Double handleCone for installing unit in bungholes. Double handle, for exact control of sprayhead.Order no. 4.132002.0
Double handleCone for installing unit in bungholes. Double handle, for exact control of sprayheadOrder no. 2.863036.0
© 2007 Alfred Kärcher GmbH & Co. KG 10 / 18
Hot water middle classHDS 6954 M Eco
Nozzle kits for Inno/Easy Set Nozzle kits for Inno/Easy SetIdeally match performance to different machine outputs for economicoperation.Order no. 2.640688.0
Nozzle pack for wetblasting attachment Nozzle pack for wetblasting attachmentConsisting of wetblasting nozzle and nozzle insert, only for use with wetblasting attachment 4762010/022Order no. 2.637902.0
Pipe cleaning hose, ID 6 Pipe cleaning hose ID 6Very flexible highpressure hose for pipe cleaning (1/8"connection for nozzle)Order no. 6.390030.0
Pipe cleaning hose, ID 6Very flexible highpressure hose for pipe cleaning (1/8"connection for nozzle)Order no. 6.390029.0
Pipe cleaning hose, ID 6Very flexible highpressure hose for pipe cleaning (1/8"connection for nozzle)Order no. 6.390028.0
© 2007 Alfred Kärcher GmbH & Co. KG 11 / 18
Hot water middle classHDS 6954 M Eco
Pipe cleaning nozzle Pipe cleaning nozzleWith female thread, different spraying directions for environmentfriendlycleaning of blocked drains and pipes. Nozzle orifices are positioned so thatnozzle pulls itself and the hose into the pipe. 1x forwards, 3x30° backwards,€ 30 mmOrder no. 5.763021.0
Pipe cleaning nozzleWith female thread, different spraying directions for environmentfriendlycleaning of blocked drains and pipes. Nozzle orifices are positioned so thatnozzle pulls itself and the hose into the pipe. 3 x 30 °backwards, € 16 mmOrder no. 5.763019.0
Pipe cleaning nozzleWith female thread, different spraying directions for environmentfriendlycleaning of blocked drains and pipes. Nozzle orifices are positioned so thatnozzle pulls itself and the hose into the pipe. 1x forwards, 3x30° backwards,€ 30 mmOrder no. 5.763017.0
Pipe cleaning nozzleWith female thread, different spraying directions for environmentfriendlycleaning of blocked drains and pipes. Nozzle orifices are positioned so thatnozzle pulls itself and the hose into the pipe. 1x forwards, 3x30° backwards,€ 16 mmOrder no. 5.763016.0
Pipe cleaning nozzleWith female thread, different spraying directions for environmentfriendlycleaning of blocked drains and pipes. Nozzle orifices are positioned so thatnozzle pulls itself and the hose into the pipe. 3 x 30 °backwards, € 16 mmOrder no. 5.763015.0
© 2007 Alfred Kärcher GmbH & Co. KG 12 / 18
Hot water middle classHDS 6954 M Eco
Pipe cleaning nozzleWith female thread,different spraying directions for environmentfriendlycleaning of blocked drains and pipes.Nozzle orifices are positioned so thatnozzle pulls itself and the hose into the pipeBrass, for M22 x 1.5 connectiondirectly to HP hoseOrder no. 5.763011.0
Pivoting spray lancer Pivoting spray lancerSpray lances in various lenghts, stainless steel with hand screw union.Ergonomically shaped handle mouldings for optimum control and insulaton.Can be turned 360° under pressure.Order no. 4.760550.0
Spray lance, 2040 mm, rotatableSpray lances in various lenghts, stainless steel with hand screw union.Ergonomically shaped handle mouldings for optimum control and insulaton.Can be turned 360° under pressure.Order no. 4.760366.0
Spray lance, 1500 mm, rotatableSpray lances in various lenghts, stainless steel with hand screw union.Ergonomically shaped handle mouldings for optimum control and insulaton.Can be turned 360° under pressure.Order no. 4.760365.0
Pivoting spray lanceSpray lances in various lenghts, stainless steel with hand screw union.Ergonomically shaped handle mouldings for optimum control and insulaton.Can be turned 360° under pressure.Order no. 4.760364.0
© 2007 Alfred Kärcher GmbH & Co. KG 13 / 18
Hot water middle classHDS 6954 M Eco
Power nozzle 15° Power nozzle pray angle 15°Fan jet nozzle for stubborn dirtOrder no. 2.883390.0
Power nozzle 25° Power nozzle spray angle 25°Fan jet nozzle for large area coverage and stubborn dirtOrder no. 2.883399.0
Pushon washing brush Pushon washing brushGeneralpurpose cleaning on all surfaces. With clamp for mounting directly tospray lance. Connection M 18 x 1.5.Order no. 4.762016.0
Rotary washing brush Rotary washing brushDriven by water jet. Gently removes fine dust and traffic film from all surfaces.Temperature resistant up to 85 °C. M 18 x 1.5. (replaceable brush element)Order no. 4.762288.0
Rotary washing brushDriven by water jet. Gently removes fine dust and traffic film from all surfaces.Temperature resistant up to 85 °C. M 18 x 1.5. (replaceable brush element)Order no. 4.762284.0
© 2007 Alfred Kärcher GmbH & Co. KG 14 / 18
Hot water middle classHDS 6954 M Eco
SapCCE Addon kit hose reel Order no. 6.391421.0
Selfwinding hose reel for wall mounting Addon kit wall fastening hose reelAdd on kit to fasten a hose reel at the wall.Order no. 2.639931.0
Hose reel without hphose, automaticSelfwinding hose reel (without HP hose) Kärcher HD hose plugin systemOrder no. 2.639919.0
Spray lance Spray lance, 250 mm, fixedStainless steel with hand screw union, does not pivot In conjunction withextended trigger gunOrder no. 4.760058.0
Spritzkopf HKF 50, Messing HKF 50 spray head , brassReach 850 mm. Interior cleaning head for drums, barrels and tanks. Forbungholes of 50 mm and more. Connects directly to highpressure cleaner.Driven by electric motor. Operates in vertical and horizontal positions.Order no. 3.631039.0
© 2007 Alfred Kärcher GmbH & Co. KG 15 / 18
Hot water middle classHDS 6954 M Eco
Steam nozzle Steam nozzle .50° flat jet for cleaning and thawing operations in steam mode, e.g. thawingsand and gravel, deicing formwork, dewaxing vehicles.Order no. 4.766023.0
Suction filter Suction filterWith/without nonreturn valve, brassOrder no. 4.730019.0
Suction filterWith/without nonreturn valve, brassOrder no. 4.730012.0
Trigger guns Servopress Softgrip trigger gunServopress controllerOrder no. 4.775470.0
Servopress Softgrip trigger gunEasy Press trigger gun, integralOrder no. 4.775463.0
Unterbodenstrahlrohr Underbody lanceMobile. For effective and convenient cleaning of underbodies and wheelarches. Stainless steel. Without HP nozzleOrder no. 4.760245.0
© 2007 Alfred Kärcher GmbH & Co. KG 16 / 18
Hot water middle classHDS 6954 M Eco
Variable pressure spray lance Variable pressure spray lanceWith integral pressure gauge for infinitely variable pressure control directly onlance. Nozzle connection M 24 x 1.5. Chemical feed in low pressure mode.Variable pressure lance and Kärcher Power nozzle.Order no. 4.760362.0
Variable pressure spray lanceWith integral pressure gauge for infinitely variable pressure control directly onlance. Nozzle connection M 24 x 1.5. Chemical feed in low pressure mode.Variable pressure lance and Kärcher Power nozzle.Order no. 4.760230.0
Vario nozzle 0°90° Varlo nozzle 090°Highpressure jet infinitely variable between 0° and 90° so it can be exactlymatched to all types of soiling and surfaces.Order no. 4.763039.0
Verbindungsstück AdapterFor connecting HP nozzles and accessories directly to trigger gun ( with nozzleunion) 1 x M22 x 1.5/ 1 x M18 x 1.5Order no. 4.402022.0
Water supply hose Water supply hoseID 19 R1"/R1" up to 85°COrder no. 4.440270.0
© 2007 Alfred Kärcher GmbH & Co. KG 17 / 18
Hot water middle classHDS 6954 M Eco
Water supply hoseID 19 R1"/R 3/4" up to 85°C for suction modeOrder no. 4.440207.0
Water supply hoseID13 R1"/R 3/4" up to 30°COrder no. 4.440038.0
WCStrahlrohr WCSpray lanceWith nozzle. Specially shaped for cleaning WCs. Stainless steel.Order no. 4.760073.0
Wet blasting attachment Wetblasting attachment (without nozzles)Adds abrasive to highpressure jet. For removing paint, rust, scale. Mounts tospray lance in place of HP nozzle. Without abrasive flow controlOrder no. 4.762022.0
Wet blasting attachment ( without nozzles)Adds abrasive to highpressure jet. For removing paint, rust, scale. Mounts tospray lance in place of HP nozzle. With abrasive flow controlOrder no. 4.762010.0
© 2007 Alfred Kärcher GmbH & Co. KG 18 / 18