Hong Kong Government Recognized Service Supplierresource.scholastic.com.au/resourceFiles/Toy... ·...

Hong Kong Government Recognized Service Supplier Approved Laboratory of The Woolmark Company Members of : American National Standards Institute Hong Kong Association for Testing, Inspection and Certification Limited American Society for Testing and Materials Hong Kong Toys Council British Standards Institute

Test Report Number: HKGH0125424401

For and on behalf of : Intertek Testing Services HK Ltd.

Karen S.C. Ng General Manager

*HJ01254244* of 35

Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong.

Tel: (852) 2173 8888 Fax: (852) 2786 1903 Website: www.intertek.com

Applicant: MAKEDO PTY LTD Date: Dec 21, 2011 18 STUDLEY STREET

ABBOTSFORD VICTORIA 3067 AUSTRALIA

Attn: MARIA PAPAS

Sample Description:

One (1) set of submitted sample said to be : Item name : Assorted makedo products

(1) Pin (MKD-001) (2) Clip (MKD-002) (3) Hinge (MKD-003) (4) Construction tool (MKD-004) (5) Mini punch (MKD-005) (6) Poster (POS-003) (7) Instruction sheet - Robot (INS-002) (8) Diecut features - Chimp/Rabbit (INS-007) (9) Diecut features - Cow/Rooster (INS-008) (10) Diecut features - Penguin/Hippo (INS-009) (11) Sampler insert - (INS-011) (12) Sticker sheet - Robot (STI-003) (13) Tamper proof sticker (STI-007) (14) Sticker - eyes (STI-012) (15) ED010 - pack sticker (STI-039) (16) Recycled cardboard tube D60 (PAC-001) (17) Recycled box - F&M Robot (PAC-007) (18) Packaging wrap - Cow/Rooster (PAC-018) (19) Blister tray - Flower/Robot/Elephant/Plane (PAC-035) (20) PS lid for 8oz cup (PAC-020) (21) Paper cup 8oz (22) Mini Pouch (PAC-031) (23) Pouch - studio10 (PAC033) (24) Inner carton - KT03x4 (CTI-002) (25) Outer carton - KT03x24 (CTO-002) (26) Inner CDU - FM01/FM02/FM06/FM07x6 (CDU-002) (27) Clip (100) Polybag (POL-002) (28) Distributor label03_English_German_Italian

************************************************************************************************************************************** To be continued





*HJ01254244* of 35



Sample Description:

Reference No. : (1) & (2) KT00-001, KT01-002, KT03-002, ED01-001, ED02-001, PC30-001, FM01-006, FM02-001, FM06-001, FM07-001, FM03-001, FM04-001, FM05-001, FM08-001, FM09-001, CC01-901, SA00-010, SA01-000, PS11-003, PS11-005 (3), (4) & (5) KT00-001, KT01-002, KT03-002, ED01-001, ED02-001, HG10-001, CT05-001, FM01-006, FM02-001, FM06-001, FM07-001, FM03-001, FM04-001, FM05-001, FM08-001, FM01-005, CC01-901, SA00-010, SA01-000 (6) KT00-001, KT01-002, KT03-002, ED01-001, ED02-001, FM01-006, FM02-001, FM06-001, FM07-001, FM03-001, FM04-001, FM05-001, FM08-001, FM09-001 (7) FM01-006, FM02-001, FM06-001, FM07-001, FM03-001, FM04-001, FM05-001, FM08-001, FM09-001 (8), (9) & (10) CC01-901, PS11-005 (11) KT00-001, KT01-002, KT03-002, ED01-001, ED02-001, ED03-001, FM01-006, FM02-001, FM06-001, FM07-001, FM03-001, FM04-001, FM05-001, FM08-001, FM09-001 (12) FM01-006, FM02-001, FM06-001, FM07-001, FM03-001, FM04-001, FM05-001, FM08-001, FM09-001 (13) KT00-001, KT01-002, KT03-002, FM01-006, FM02-001, FM06-001, FM07-001, FM03-001, FM04-001, FM05-001, FM08-001, FM09-001 (14) CC01-901, PS11-005 (15) ED01-001, ED02-001 (16) KT01-002, KT03-002 (17) FM01-006, FM02-001, FM06-001, FM07-001, FM03-001, FM04-001, FM05-001, FM08-001, FM09-001 (18) CC01-901 (19) FM01-006, FM02-001, FM06-001, FM07-001, FM03-001, FM04-001, FM05-001, FM08-001, FM09-001, CC01-901, PS11-005 (20) FM01-006, FM02-001, FM06-001, FM07-001, FM03-001, FM04-001, FM05-001, FM08-001, FM09-001, CC01-901, PS11-005 (21) CC01-901, PS11-005 (22) KT00-001 (23) ED01-001, ED02-001 (24) KT00-001, KT01-002, KT03-002, ED01-001, ED02-001, PC30-001, HG10-001, CT05-001, PS11-005 (25) KT00-001, KT01-002, KT03-002, ED01-001, ED02-001, PC30-001, HG10-001, CT05-001, FM01-006, FM02-001, FM06-001, FM07-001, FM03-001, FM04-001, FM05-001, FM08-001, FM09-001, CC01-901, SA00-010, SA01-000, PS11-005

************************************************************************************************************************************** To be continued





*HJ01254244* of 35



Sample Description:

Reference No. : (26) FM01-006, FM02-001, FM06-001, FM07-001, FM03-001, FM04-001, FM05-001, FM08-001, FM09-001, CC01-901, PS11-001 (27) ED01-001, ED02-001, PC30-001, HG10-001, CT05-001, SA00-010, SA01-000 (28) KT00-001, KT01-002, KT03-002, ED01-001, ED02-001, PC30-001, HG10-001, CT05-001, FM01-006, FM02-001, FM06-001, FM07-001, FM03-001, FM04-001, FM05-001, FM08-001, FM09-001, CC01-901, SA00-010, SA01-000, PS11-003,PS11-005

Labelled age group : "5+" Age grading for testing : Ages over 3 years Packaging provided : Yes Country of origin : China Distribution : USA, Australia, New Zealand, Europe, UK, Canada, Japan

************************************************************************************************************************************** To be continued





*HJ01254244* of 35



Sample Description:

************************************************************************************************************************************ Tests conducted: As requested by the applicant, refer to attached page(s) for details. ************************************************************************************************************************************

To be continued





*HJ01254244* of 35



Conclusion:

Tested Samples Standard Result Submitted sample set U.S. ASTM F963-08 Physical and mechanical tests Pass U.S. ASTM F963-08 for flammability test of materials

other than textile materials Pass

Tested component of submitted sample set

U.S. ASTM F963-08 for toxic elements test Pass

********************************************************************************************************************************

Tested Samples Standard Result Tested components of submitted sample set

U.S. Consumer Product Safety Improvement Act 2008 Title I Section 101 for total Lead content in non-surface coating materials (substrate)

Pass

U.S. Code of Federal Regulations Title 16 CFR 1303 for

total Lead content in surface coating Pass

U.S. Consumer Product Safety Improvement Act 2008

Title I Section 101 for total Lead content in surface coating

Pass

U.S. Consumer Product Safety Improvement Act 2008

Title I, Section 108 for Phthalate content Pass

Model Toxics in Packaging Legislation (packaging

materials) for toxic elements test Pass

********************************************************************************************************************************

Tested samples Standard Result Submitted sample set EN71-1 : 2011 for mechanical and physical properties Pass EN71-2 : 2011 for Flammability test Pass Tested components of submitted sample set

EN71-3 : 1994 and amendment A1 : 2000 and AC : 2002 for toxic elements test

Pass

******************************************************************************************************************************** To be continued





*HJ01254244* of 35



Conclusion:


Cadmium content requirement in Annex XVII Item 23 of the REACH Regulation (EC) no. 1907/2006 & amendment no.552/2009 (formerly known as Directive 91/338/EEC)

Pass

Phthalates content requirement in Annex XVII Items 51 &

52 of the REACH Regulation (EC) no. 1907/2006 & amendment no. 552/2009 (formerly known as Directive 2005/84/EC)

Pass

94/62/EC and amendment 2004/12/EC & 2005/20/EC

Directive (packaging waste) for toxic elements test Pass

Organotin content requirement in Annex XVII item 20 of

the REACH Regulation (EC) No. 1907/2006 & amendment (EU) No. 276/2010 (formerly known as Decision 2009/425/EC)

Pass

Polycyclic Aromatic Hydrocarbons (PAH) content See details enclosed

********************************************************************************************************************************

Tested samples Standard Result Submitted sample set Australian / New Zealand Standard AS/NZS ISO 8124-

1:2010 safety aspects related to mechanical and physical properties

Pass

Australian / New Zealand Standard AS/NZS ISO 8124-

2:2009 for flammability test Pass

Tested components of submitted sample set

Australian / New Zealand Standard AS/NZS ISO 8124-3:2003 for toxic elements test (Australian Trade Practice Act 1974 with Consumer Protection Notice no. 1, 2009 - Consumer Product Safety Standard for Lead and certain elements in children�s toys.)

Pass

Australian Customs Notice no. 2007/46 - amendments to the Customs (Prohibited Imports) Regulations 1956 Schedule 2 Item 2 for toxic elements test.

Pass

******************************************************************************************************************************** To be continued





*HJ01254244* of 35



Conclusion:

Tested Samples Standard Result Submitted sample set Canada Consumer Product Safety Act Toys Regulations

SOR/2011-17 for mechanical and physical test excluding section 3 and 4

Pass

Canada Consumer Product Safety Act Toys Regulations

SOR/2011-17 section 21 for celluloid or cellulose nitrate Pass

Tested component of submitted sample set

Canada Consumer Product Safety Act Toys Regulation SOR/2011-17 Section 23 for toxic elements test

Pass

********************************************************************************************************************************

Tested samples Japan Toy Safety Standard Result Submitted sample set Part 1 : ST2002 excluding labelling requirement of

clause 7.1 and 7.2 Pass

Part 2 : 2002 flammability test Pass Tested components of submitted sample set

Part 3 : 2002 (Tenth Edition 2010) clause 1.1 for coloring matters test on colored materials

Pass

Part 3 : 2002 (Tenth Edition 2010) clause 1.5 for heavy

metals content in paint Pass

******************************************************************************************************************************** To be continued





*HJ01254244* of 35



Conclusion:


Specifications and Standards and Testing Methods of �Foodstuffs�, �Implements�, �Containers and Packaging�, �Toys� and �Detergents�, Section IV - Toys, (Notification no. 370 of Ministry of Health, Labour and Welfare, 1959), (Notification no. 153 of Ministry of Health, Labour and Welfare, amendment on 31 March 2008), under the Japan Food Sanitation Law (Law no. 233, 1947) for coloring matters.

Pass

Specifications and Standards and Testing Methods of

�Foodstuffs�, �Implements�, �Containers and Packaging�, �Toys� and �Detergents�, Section IV - Toys, (Notification no. 370 of Ministry of Health, Labour and Welfare, 1959), (Notification no. 153 of Ministry of Health, Labour and Welfare, amendment on 31 March 2008), under the Japan Food Sanitation Law (Law no. 233, 1947) for heavy metals content in paint coating.

Pass

************************************************************************************************************************************



Tests Conducted

*HJ01254244* of 35



1 Physical And Mechanical Tests As per the ASTM Standard Consumer Safety Specification for Toy Safety F963-08. Applicant's specified age group for testing : For ages over 3 years.

The submitted samples were undergone the use and abuse tests in accordance with the Federal Hazardous Substances Act (FHSA), Title 16, Code of Federal Regulations : -

Test FHSA Parameter

Impact test Section 1500.53(b) 4 x 3.0 ft

Torque test Section 1500.53(e) 4 in-lbf

Tension test Section 1500.53(f) 15 lbf

Compression test Section 1500.53(g) 30 lbf

Section Testing items Assessment 4.1 Material quality (visual check on cleanliness) P 4.5 Sound-producing toys NA 4.6.1 Toys intended for children under 36 months (small objects) NA 4.6.2 Mouth-actuated toys NA 4.6.3 Toys and games for 36 months to 72 months (small part warning) P 4.7 Accessible edges P 4.8 Projections NA 4.9 Accessible points P 4.10 Wires or rods NA 4.11 Nails and fasteners P 4.12 Packaging film P 4.13 Folding mechanisms and hinges NA 4.14 Cords and elastics NA 4.15 Stability and over-load requirements NA 4.16 Confined spaces NA 4.17 Wheels, tires and axles NA 4.18 Holes, clearance, and accessibility of mechanisms NA 4.19 Simulated protective devices, such as helmets, hats and goggles NA 4.20 Pacifiers NA 4.21 Projectile toys NA 4.22 Teethers and teething toys NA 4.23 Rattles NA 4.24 Squeeze toys NA 4.25 Battery-operated toys NA 4.26 Toys intended to be attached to a crib or playpen NA 4.27 Stuffed and beanbag-type toys NA 4.28 Stroller and carriage toys NA



Tests Conducted

*HJ01254244* of 35



Section Testing items Assessment 4.29 Art materials NA 4.30 Toy gun marking NA 4.31 Balloons NA 4.32 Certain toys with spherical ends NA 4.33 Marbles NA 4.34 Balls NA 4.35 Pompoms NA 4.36 Hemispheric-shaped objects NA 4.37 Yoyo elastic tether toys NA 4.38 Magnets NA 4.39 Jaw entrapment in handles and steering wheels NA 5 Labelling requirement P 6 Instructional literature P 7 Producer's markings

- name of producer/distributor (package)

Yes - address (package) Yes

Remark : P = Pass NA = Not applicable

The submitted samples were undergone the tests in accordance with section 8.5 through section 8.18 and 8.20 through 8.25 on normal use, abuse and specific tests for different types oftoys whichever is applicable.

Date sample received : Dec 01, 2011 Testing period : Dec 01, 2011 to Dec 09, 2011

2 Flammability Test As per Section 4.2 of the ASTM Standard Consumer Safety Specification for Toy Safety F963-08.

Sample Ignition point

Burn length

Time Burn rate

Limit

(inch) (sec) (inch/sec) (inch/sec) Re-clip Edge 1.5 60 0.03 0.10

All styles of the submitted toy samples and its accessories were tested, the above result only showed the most

severe burn rate of the samples. Date sample received : Dec 01, 2011 Testing period : Dec 01, 2011 to Dec 09, 2011

*********************************************************************************************************************************



Tests Conducted

*HJ01254244* of 35



3 Toxic Elements Analysis

As per Section 4.3.5 of the ASTM Standard Consumer Safety Specification on Toy Safety F963-08, acid digestion and extraction methods were used and toxic elements content were determined by Inductively Coupled Argon Plasma Spectrometry. Result in ppm Limit ppm Total Lead (Pb) <20 90 Sol. Barium (Ba) <5 1000 Sol. Lead (Pb) <5 90 Sol. Cadmium (Cd) <5 75 Sol. Antimony (Sb) <5 60 Sol. Selenium (Se) <5 500 Sol. Chromium (Cr) <5 60 Sol. Mercury (Hg) <5 60 Sol. Arsenic (As) <2.5 25

Sol. = Soluble < = Less than ppm = parts per million Tested Component : Coatings on paper label (ED010 pack sticker).


4 Total Lead (Pb) Content in Non-Surface Coating Materials (Substrate)

As per Standard Operating Procedures for Determining Total Lead (Pb) in Children�s Products, test methods CPSC-CH-E1002-08.1 and/or CPSC-CH-E1001.08.1 were used and total Lead content was determined by Inductively Coupled Argon Plasma Spectrometry.

Tested Component Result in ppm Limit in ppm

(1) <20 100 (2) <20 100 (3) <20 100 (4) <20 100 (5) <20 100 (6) <20 100 (7) <20 100 (8) <20 100

ppm = parts per million = mg/kg < = Less than

********************************************************************************************************************************



Tests Conducted

*HJ01254244* of 35



Tested Components : (1) Blue plastic (pin, clip). (2) Black plastic (hinge, construction tool, mini punch). (3) Dull black plastic (lid for 8oz cup). (4) Transparent plastic label (tamper proof sticker). (5) Paper card with plastic film (diecut features). (6) Paper label with printings (sticker sheet). (7) Paper label with plastic film (sticker- eyes). (8) Paper label excluding coatings (ED010 pack sticker).


5 Total Lead (Pb) Content in Surface Coating As per Standard Operating Procedure for Determining Lead (Pb) in Paint and Other Similar Surface Coatings,

test method CPSC-CH-E1003-09.1 was used and total Lead content was determined by Inductively Coupled Argon Plasma Spectrometry.

Result : Less than 20 ppm Limit : 90 ppm ppm = mg/kg = milligram per kilogram Tested Component : Coatings on paper label (ED010 pack sticker). Date sample received : Dec 01, 2011 Testing period : Dec 01, 2011 to Dec 09, 2011 ********************************************************************************************************************************



Tests Conducted

*HJ01254244* of 35



6 Phthalate Content Test

As per Standard Operating Procedure for Determining Phthalates, test method CPSC-CH-C1001-09.3 was used and phthalate content was determined by Gas Chromatographic-Mass Spectrometric (GC-MS) analysis.

Result (%, w/w) Limit (%, w/w) (max.) (1) (2) (3) Dibutyl phthalate (DBP) 0.04 <0.01 <0.01 0.1 Diethyl hexyl phthalate (DEHP) <0.01 <0.01 <0.01 0.1 Benzyl butyl phthalate (BBP) <0.01 <0.01 <0.01 0.1 Diisononyl phthalate (DINP) <0.01 <0.01 <0.01 0.1 Di-n-octyl phthalate (DnOP) <0.01 <0.01 <0.01 0.1 Diisodecyl phthalate (DIDP) <0.01 <0.01 <0.01 0.1

Result (%, w/w) Limit (%, w/w) (max.) (4) (5) (6) Dibutyl phthalate (DBP) <0.01 <0.01 <0.01 0.1 Diethyl hexyl phthalate (DEHP) <0.01 <0.01 <0.01 0.1 Benzyl butyl phthalate (BBP) <0.01 <0.01 <0.01 0.1 Diisononyl phthalate (DINP) <0.01 <0.01 <0.01 0.1 Di-n-octyl phthalate (DnOP) <0.01 <0.01 <0.01 0.1 Diisodecyl phthalate (DIDP) <0.01 <0.01 <0.01 0.1

Result (%, w/w) Limit (%, w/w) (max.) (7) (8) (9) Dibutyl phthalate (DBP) <0.01 <0.01 0.04 0.1 Diethyl hexyl phthalate (DEHP) <0.01 <0.01 <0.01 0.1 Benzyl butyl phthalate (BBP) <0.01 <0.01 <0.01 0.1 Diisononyl phthalate (DINP) <0.01 <0.01 <0.01 0.1 Di-n-octyl phthalate (DnOP) <0.01 <0.01 <0.01 0.1 Diisodecyl phthalate (DIDP) <0.01 <0.01 <0.01 0.1

Remark : The above limit was quoted according to US Consumer Product Safety Improvement Act 2008

for prohibition on sale of certain products containing specified phthalates. < = Less than ********************************************************************************************************************************



Tests Conducted

*HJ01254244* of 35



Tested Components :

(1) Coatings on paper label (ED010 pack sticker). (2) Blue plastic (pin, clip). (3) Black plastic (hinge, construction tool, mini punch). (4) Dull black plastic (lid for 8oz cup). (5) Transparent plastic label (tamper proof sticker). (6) Paper card with plastic film (diecut features). (7) Paper label with printings (sticker sheet). (8) Paper label with plastic film (sticker- eyes). (9) Paper label excluding coatings (ED010 pack sticker).


7 Toxic Elements Analysis As per Model Toxics in Packaging Legislation requirement of packaging and packaging components, acid

digestion method was used and toxic elements contents were determined by Inductively Coupled Argon Plasma Spectrometry, and Hexavalent Chromium content was determined by UV-Visible Spectrophotometry.

Result in ppm Limit (1) (2) (3) (4) (5) (6) (ppm) Lead (Pb) <5 <5 <5 <5 <5 <5 -- Cadmium (Cd) <5 <5 <5 <5 <5 <5 -- Mercury (Hg) <5 <5 <5 <5 <5 <5 -- Chromium VI (Cr (VI)) <1 <1 <1 <1 <1 <1 -- Sum of Pb, Cd, Hg and Cr (VI) <16 <16 <16 <16 <16 <16 100



********************************************************************************************************************************



Tests Conducted

*HJ01254244* of 35



Result in ppm Limit (19) (20) (21) (22) (ppm) Lead (Pb) <5 <5 <5 <5 -- Cadmium (Cd) <5 <5 <5 <5 -- Mercury (Hg) <5 <5 <5 <5 -- Chromium VI (Cr (VI)) <1 <1 <1 <1 -- Sum of Pb, Cd, Hg and Cr (VI) <16 <16 <16 <16 100

ppm = parts per million < = Less than Tested Components :

(1) Brown/ white paper board (lid, body of Recycled Cardboard Tube D60) (packaging). (2) Brown paper label with printings (wrapping of Recycled Cardboard Tube D60) (packaging). (3) Coatings on paper card (printed box - recycled box- F&M robot) (packaging). (4) Paper card excluding coatings (printed box - recycled box- F&M robot) (packaging). (5) Coatings (white, pale cyan, cyan, deep cyan) on paper card (printed card- packaging wrap- cow/

rooster) (packaging). (6) Paper card with plastic film and excluding coatings (printed card- packaging wrap- cow/ rooster)

(packaging). (7) Black plastic (blister tray) (packaging). (8) Paper sheet with plastic film (resealable bag- mini pouch) (packaging). (9) Translucent plastic (mouth of resealable bag- mini pouch, pouch- studio 10) (packaging). (10) White plastic sheet with inaccessible printings (resealable bag- pouch- studio 10) (packaging). (11) Transparent plastic sheet (base of resealable bag- pouch- studio 10) (packaging). (12) Black coating on paper board (carton box- inner carton, outer carton) (packaging). (13) Pale brown paper board (carton box- inner carton, outer carton) (packaging). (14) Dull black coating on paper board (printed tray- inner CDU) (packaging). (15) Paper board with plastic film (printed tray- inner CDU) (packaging). (16) Translucent plastic sheet with black coating (polybag- clip (100) polybag) (packaging). (17) Paper label excluding (black, white) coatings (distributor label) (packaging). (18) Coatings (black, white) on paper label (distributor label) (packaging). (19) Dull yellow paper sheet (back of distributor label) (packaging). (20) Light yellow paper sheet (back of tamper proof sticker) (packaging). (21) Yellow paper sheet (back of sticker- eyes, ED010 pack sticker) (packaging). (22) White paper sheet (back of sticker sheet) (packaging).


*********************************************************************************************************************************



Tests Conducted

*HJ01254244* of 35



8 Mechanical and Physical Test

As per European Standard on Safety of toys EN71-1 : 2011. Applicant's specified age group for testing : Ages over 3 years.

Clause Testing items Assessment 4* General requirements P 5 Toys intended for children under 36 months NA 6 Packaging P 7 Warnings, markings and instructions for use P#

Remark : P = Pass NA = Not Applicable * = The following subclauses of Clause 4 of the standard were applicable : -

1) 4.1 Material cleanliness. 2) 4.7 Edges. 3) 4.8 Points and metallic wires. # = Age warning statement, graphical symbol and the indication of hazard was found on the

packaging. Remark : Below are additional information according to the Toy Safety Directives 2009/48/EC

requirement. These information also appears as a note within the EN71 but are not standard requirements:

Marking The manufacturer's and importer's name, registered trade name or registered trade mark, the address and type, batch, serial or model number or other element allowing their identification shall be indicated on the product itself. In addition, toys or packagings shall also bear the CE-marking. After checking, it was found that:

- Manufacturer's name and address was on the packaging only. - Importer's name and address was on the packaging only. - Product identification code was on the packaging only.

Date sample received : Dec 01, 2011 Testing period : Dec 01, 2011 to Dec 09, 2011 ********************************************************************************************************************************



Tests Conducted

*HJ01254244* of 35



9 Flammability Test

As per European Standard on Safety of Toys EN71-2:2011

Clause Testing items Assessment 4.1 General P 4.2 Toys to be worn on the head NA 4.3 Toy disguise costumes and toys intended to be worn by a child in play NA 4.4 Toys intended to be entered by a child NA 4.5 Soft filled toys NA

Remark : P = Pass NA = Not applicable


10 Toxic Elements Analysis As per European Standard on Safety of toys EN71-3 : 1994 and amendment A1 : 2000 and AC : 2002, acid

extraction method was used and toxic elements content were determined by Inductively Coupled Argon Plasma Spectrometry.

Result in mg/kg Limit (1) (2) (3) (4) (5) mg/kg Sol. Barium (Ba) <5 <5 <5 <5 <5 1000 Sol. Lead (Pb) <5 <5 <5 <5 <5 90 Sol. Cadmium (Cd) <5 <5 <5 <5 <5 75 Sol. Antimony (Sb) <5 <5 <5 <5 <5 60 Sol. Selenium (Se) <5 <5 <5 <5 <5 500 Sol. Chromium (Cr) <5 <5 <5 <5 <5 60 Sol. Mercury (Hg) <5 <5 <5 <5 <5 60 Sol. Arsenic (As) <2.5 <2.5 <2.5 <2.5 <2.5 25

Result in mg/kg Limit (6) (7) (8) (9) (10) mg/kg Sol. Barium (Ba) <5 <5 <5 12 <5 1000 Sol. Lead (Pb) <5 <5 <5 <5 <5 90 Sol. Cadmium (Cd) <5 <5 <5 <5 <5 75 Sol. Antimony (Sb) <5 <5 <5 <5 <5 60 Sol. Selenium (Se) <5 <5 <5 <5 <5 500 Sol. Chromium (Cr) <5 <5 <5 <5 <5 60 Sol. Mercury (Hg) <5 <5 <5 <5 <5 60 Sol. Arsenic (As) <2.5 <2.5 <2.5 <2.5 <2.5 25

Sol. = Soluble < = Less than mg/kg = milligram per kilogram ********************************************************************************************************************************



Tests Conducted

*HJ01254244* of 35



Tested Components :

(1) Blue plastic (pin, clip). (2) Black plastic (hinge, construction tool, mini punch). (3) Dull black plastic (lid for 8oz cup). (4) Transparent plastic label (tamper proof sticker). (5) Paper sheet with printings (poster, instruction sheet, sampler insert). (6) Paper card with plastic film (diecut features). (7) Paper label with printings (sticker sheet). (8) Paper label with plastic film (sticker- eyes). (9) Paper label with coatings (ED010 pack sticker). (10) Beige paper card (paper cup 8oz).


11 Cadmium (Cd) Content

As per Cadmium content requirement in Annex XVII Item 23 of the REACH Regulation (EC) no. 1907/2006 & amendment no. 552/2009 (formerly known as Directive 91/338/EEC), acid digestion method was used and total Cadmium content was determined by Inductively Coupled Argon Plasma Spectrometry.

Tested Component Result in % Limit in %

(1) <0.0005 0.01 (2) <0.0005 0.01 (3) <0.0005 0.01 (4) <0.0005 0.01 (5) <0.0005 0.01 (6) <0.0005 0.01 (7) <0.0005 0.01

< = Less than

Tested Components :

(1) Coatings on paper label (ED010 pack sticker). (2) Blue plastic (pin, clip). (3) Black plastic (hinge, construction tool, mini punch). (4) Dull black plastic (lid for 8oz cup). (5) Transparent plastic label (tamper proof sticker). (6) Paper card with plastic film (diecut features). (7) Paper label with plastic film (sticker- eyes).


********************************************************************************************************************************



Tests Conducted

*HJ01254244* of 35



12 Phthalate Content Test With reference to EN14372, by Gas Chromatographic-Mass Spectrometric (GC-MS) analysis.

Result (%, w/w) Limit (%, w/w) (max.) (1) (2) (3) Dibutyl phthalate (DBP) 0.04 <0.01 <0.01 -- Diethyl hexyl phthalate (DEHP) <0.01 <0.01 <0.01 -- Benzyl butyl phthalate (BBP) <0.01 <0.01 <0.01 --

Sum of DBP,DEHP & BBP 0.04 <0.01 <0.01 0.1 Di-iso-nonyl phthalate (DINP) <0.01 <0.01 <0.01 -- Di-n-octyl phthalate (DnOP) <0.01 <0.01 <0.01 -- Di-iso-decyl phthalate (DIDP) <0.01 <0.01 <0.01 --

Sum of DINP,DnOP & DIDP <0.01 <0.01 <0.01 0.1

Result (%, w/w) Limit (%, w/w) (max.) (4) (5) (6) Dibutyl phthalate (DBP) <0.01 <0.01 <0.01 -- Diethyl hexyl phthalate (DEHP) <0.01 <0.01 <0.01 -- Benzyl butyl phthalate (BBP) <0.01 <0.01 <0.01 --

Sum of DBP,DEHP & BBP <0.01 <0.01 <0.01 0.1 Di-iso-nonyl phthalate (DINP) <0.01 <0.01 <0.01 -- Di-n-octyl phthalate (DnOP) <0.01 <0.01 <0.01 -- Di-iso-decyl phthalate (DIDP) <0.01 <0.01 <0.01 --

Sum of DINP,DnOP & DIDP <0.01 <0.01 <0.01 0.1

Result (%, w/w) Limit (%, w/w) (max.) (7) (8) (9) Dibutyl phthalate (DBP) <0.01 <0.01 0.04 -- Diethyl hexyl phthalate (DEHP) <0.01 <0.01 <0.01 -- Benzyl butyl phthalate (BBP) <0.01 <0.01 <0.01 --

Sum of DBP,DEHP & BBP <0.01 <0.01 0.04 0.1 Di-iso-nonyl phthalate (DINP) <0.01 <0.01 <0.01 -- Di-n-octyl phthalate (DnOP) <0.01 <0.01 <0.01 -- Di-iso-decyl phthalate (DIDP) <0.01 <0.01 <0.01 --

Sum of DINP,DnOP & DIDP <0.01 <0.01 <0.01 0.1 Remark : The above limit was quoted according to Annex XVII Items 51 & 52 of the REACH

Regulation (EC) no. 1907/2006 & amendment no. 552/2009 (formerly known as Directive 2005/84/EC) for phthalate content in toys and children articles.

< = Less than ********************************************************************************************************************************



Tests Conducted

*HJ01254244* of 35



Tested components :

(1) Coatings on paper label (ED010 pack sticker). (2) Blue plastic (pin, clip). (3) Black plastic (hinge, construction tool, mini punch). (4) Dull black plastic (lid for 8oz cup). (5) Transparent plastic label (tamper proof sticker). (6) Paper card with plastic film (diecut features). (7) Paper label with printings (sticker sheet). (8) Paper label with plastic film (sticker- eyes). (9) Paper label excluding coatings (ED010 pack sticker).


13 Toxic Elements Analysis As per 94/62/EC and amendment 2004/12/EC & 2005/20/EC Directive on packaging and packaging waste,

acid digestion method was used and toxic elements contents were determined by Inductively Coupled Argon Plasma Spectrometry, and Hexavalent Chromium content was determined by UV-Visible Spectrophotometry.




********************************************************************************************************************************



Tests Conducted

*HJ01254244* of 35



Result in ppm Limit (19) (20) (21) (22) (ppm) Lead (Pb) <5 <5 <5 <5 -- Cadmium (Cd) <5 <5 <5 <5 -- Mercury (Hg) <5 <5 <5 <5 -- Chromium VI (Cr (VI)) <1 <1 <1 <1 -- Sum of Pb, Cd, Hg and Cr (VI) <16 <16 <16 <16 100

ppm = part per million < = Less than Tested Components :

(1) Brown/ white paper board (lid, body of Recycled Cardboard Tube D60) (packaging). (2) Brown paper label with printings (wrapping of Recycled Cardboard Tube D60) (packaging). (3) Coatings on paper card (printed box - recycled box- F&M robot) (packaging). (4) Paper card excluding coatings (printed box - recycled box- F&M robot) (packaging). (5) Coatings (white, pale cyan, cyan, deep cyan) on paper card (printed card- packaging wrap- cow/

rooster) (packaging). (6) Paper card with plastic film and excluding coatings (printed card- packaging wrap- cow/ rooster)

(packaging). (7) Black plastic (blister tray) (packaging). (8) Paper sheet with plastic film (resealable bag- mini pouch) (packaging). (9) Translucent plastic (mouth of resealable bag- mini pouch, pouch- studio 10) (packaging). (10) White plastic sheet with inaccessible printings (resealable bag- pouch- studio 10) (packaging). (11) Transparent plastic sheet (base of resealable bag- pouch- studio 10) (packaging). (12) Black coating on paper board (carton box- inner carton, outer carton) (packaging). (13) Pale brown paper board (carton box- inner carton, outer carton) (packaging). (14) Dull black coating on paper board (printed tray- inner CDU) (packaging). (15) Paper board with plastic film (printed tray- inner CDU) (packaging). (16) Translucent plastic sheet with black coating (polybag- clip (100) polybag) (packaging). (17) Paper label excluding (black, white) coatings (distributor label) (packaging). (18) Coatings (black, white) on paper label (distributor label) (packaging). (19) Dull yellow paper sheet (back of distributor label) (packaging). (20) Light yellow paper sheet (back of tamper proof sticker) (packaging). (21) Yellow paper sheet (back of sticker- eyes, ED010 pack sticker) (packaging). (22) White paper sheet (back of sticker sheet) (packaging).


********************************************************************************************************************************



Tests Conducted

*HJ01254244* of 35



14 Organotin Content By solvent extraction, followed by Gas Chromatography Mass Spectrometric (GC/MS) analysis.

Compound Result (%, w/w) of tin Requirement (%, w/w) of tin (1) (2) (3) (4) Tributyltin (TBT) <0.0001 <0.0001 <0.0001 <0.0001 0.1 Triphenyltin (TPT) <0.0001 <0.0001 <0.0001 <0.0001 0.1 Dibutyltin (DBT) <0.0001 <0.0001 <0.0001 <0.0001 0.1 Dioctyltin (DOT) <0.0001 <0.0001 <0.0001 <0.0001 0.1

Compound Result (%, w/w) of tin Requirement (%, w/w) of tin (5) (6) (7) Tributyltin (TBT) <0.0001 <0.0001 <0.0001 0.1 Triphenyltin (TPT) <0.0001 <0.0001 <0.0001 0.1 Dibutyltin (DBT) <0.0001 <0.0001 <0.0001 0.1 Dioctyltin (DOT) <0.0001 <0.0001 <0.0001 0.1

Compound Result (%, w/w) of tin Requirement (%, w/w) of tin (8) (9) (10) Tributyltin (TBT) <0.0001 <0.0001 <0.0001 0.1 Triphenyltin (TPT) <0.0001 <0.0001 <0.0001 0.1 Dibutyltin (DBT) <0.0001 <0.0001 <0.0001 0.1 Dioctyltin (DOT) <0.0001 <0.0001 <0.0001 0.1

Remark : The above limit was quoted according to Annex XVII Items 20 of the REACH Regulation

(EC) no. 1907/2006 & amendment (EU) No. 276/2010 (formerly known as Decision 2009/425/EC) for organotin content.

< = Less than Detection limit = 0.0001% (w/w) of tin Tested Components :


Date sample received : Dec 01, 2011 and Dec 12, 2011 Testing period : Dec 01, 2011 to Dec 14, 2011

*********************************************************************************************************************************



Tests Conducted

*HJ01254244* of 35



15 Polycyclic Aromatic Hydrocarbons (PAH) Content

As per the document ZEK 01.2-08 issued by the Central Experience Exchange Office (ZEK) , by solvent extraction and determined by Gas Chromatographic - Mass Spectrometry (GC/MS).

Compound Result (ppm) (1) (2) (3) (4) Naphthalene <0.2 <0.2 1.2 0.4 Acenaphthylene <0.2 <0.2 <0.2 <0.2 Acenaphthene <0.2 <0.2 <0.2 <0.2 Fluorene <0.2 <0.2 <0.2 <0.2 Phenanthrene <0.2 <0.2 0.7 1.7 Anthracene <0.2 <0.2 <0.2 <0.2 Fluoranthene <0.2 <0.2 <0.2 <0.2 Pyrene <0.2 <0.2 1.4 <0.2 Benzo(a)anthracene <0.2 <0.2 <0.2 <0.2 Chrysene <0.2 <0.2 <0.2 <0.2 Indeno(1,2,3-cd)pyrene <0.2 <0.2 <0.2 <0.2 Benzo(b)fluoranthene <0.2 <0.2 <0.2 <0.2 Benzo(k)fluoranthene <0.2 <0.2 <0.2 <0.2 Benzo(a)pyrene <0.2 <0.2 <0.2 <0.2 Dibenzo(a,h)anthracene <0.2 <0.2 <0.2 <0.2 Benzo(ghi)perylene <0.2 <0.2 <0.2 <0.2

Sum (16 PAH) : <0.2 <0.2 3.3 2.1

Compound Result (ppm) (5) (6) (7) (8) Naphthalene 0.7 0.6 2.0 0.3 Acenaphthylene <0.2 <0.2 <0.2 <0.2 Acenaphthene <0.2 <0.2 <0.2 <0.2 Fluorene <0.2 <0.2 <0.2 <0.2 Phenanthrene 0.5 <0.2 2.0 2.4 Anthracene <0.2 0.4 0.8 <0.2 Fluoranthene <0.2 <0.2 <0.2 <0.2 Pyrene <0.2 <0.2 <0.2 <0.2 Benzo(a)anthracene <0.2 <0.2 <0.2 <0.2 Chrysene <0.2 <0.2 <0.2 <0.2 Indeno(1,2,3-cd)pyrene <0.2 <0.2 <0.2 <0.2 Benzo(b)fluoranthene <0.2 <0.2 <0.2 <0.2 Benzo(k)fluoranthene <0.2 <0.2 <0.2 <0.2 Benzo(a)pyrene <0.2 <0.2 <0.2 <0.2 Dibenzo(a,h)anthracene <0.2 <0.2 <0.2 <0.2 Benzo(ghi)perylene <0.2 <0.2 <0.2 <0.2

Sum (16 PAH) : 1.2 1.0 4.8 2.7

********************************************************************************************************************************



Tests Conducted

*HJ01254244* of 35



Remark : < = Less than ppm = parts per million = mg/kg Detection limit = 0.2 ppm Tested components :

(1) Blue plastic (pin, clip). (2) Black plastic (hinge, construction tool, mini punch). (3) Dull black plastic (lid for 8oz cup). (4) Transparent plastic label (tamper proof sticker). (5) Paper card with plastic film (diecut features). (6) Paper label with plastic film (sticker- eyes). (7) Paper label with coatings (ED010 pack sticker). (8) Paper label with printings (sticker sheet).

Date sample received : Dec 01, 2011 and Dec 12, 2011 Testing period : Dec 01, 2011 to Dec 14, 2011 ********************************************************************************************************************************



Tests Conducted

*HJ01254244* of 35



16 Physical And Mechanical Tests As per the Australian / New Zealand Standard AS/NZS ISO 8124-1:2010 safety aspects related to mechanical

and physical properties. Applicant's specified age group for testing : For ages over 3 years.

The submitted samples were undergone the normal use and the following reasonable foreseeable abuse tests in accordance with the clause 5.24 of AS/NZS ISO 8124-1 : 2010 before the assessment of the relevant requirement in clause 4 :

Clause Test Parameter

5.24.2 Drop test 4x93±5cm

5.24.5 Torque test 0.45±0.02Nm

5.24.6 Tension test 70±2N

5.24.7 Compression test 136±2N

Section Testing items Assessment 4.1 Normal use P 4.2 Reasonably foreseeable abuse P 4.3 Material P 4.4.1 Small parts NA 4.4.2 Small part warning P 4.5 Shape, size and strength of certain toys NA 4.6 Edges P 4.7 Points P 4.8 Projections NA 4.9 Metal wires and rods NA 4.10 Plastic film or plastic bags in packaging and in toys P 4.11 Cords and elastic NA 4.12 Folding mechanisms NA 4.13 Holes, clearances and accessibility of mechanisms NA 4.14 Springs NA 4.15 Stability and overload requirement NA 4.16 Enclosures NA 4.17 Simulated protective equipment, such as helmets, hats and goggles NA 4.18 Projectile toys NA 4.19 Aquatic toys NA 4.20 Braking NA 4.21 Toy bicycles NA 4.22 Speed limitation of electrically driven ride-on toys NA 4.23 Toys containing a heat source NA 4.24 Liquid-filled toys NA



Tests Conducted

*HJ01254244* of 35



Section Testing items Assessment 4.25 Mouth-actuated toys NA 4.26 Toy roller skates, toy inline skates and toy skateboards NA 4.27 Percussion caps NA 4.28 Acoustic requirements NA 4.29 Toy scooters NA 4.30 Magnets NA Annex B Safety labeling guidelines and manufacturer�s markings P Annex D Toy gun marking NA

Remark : P = Pass NA = Not applicable Date sample received : Dec 01, 2011 Testing period : Dec 01, 2011 to Dec 09, 2011

17 Flammability Test As per the Australian / New Zealand Standard AS/NZS ISO 8124-2:2009.

Clause Testing Items Assessment 4.1 General P 4.2 Toys to be worn on the head NA 4.3 Toy disguise costumes and toys intended to be worn by a child in a

play NA

4.4 Toys intended to be entered by a child NA 4.5 Soft-Filled Toys (animals and dolls, etc.) with a piled or textile surface NA

Remark : P = Pass NA = Not applicable Additional Information : Butane gas was used in the test burner. Date sample received : Dec 01, 2011 Testing period : Dec 01, 2011 to Dec 09, 2011

*********************************************************************************************************************************



Tests Conducted

*HJ01254244* of 35



18 Toxic Elements Analysis As per the Australian / New Zealand Standard AS/NZS ISO 8124-3:2003, acid extraction method was used

and toxic elements content were determined by Inductively Coupled Argon Plasma Spectrometry.

Result in mg/kg Limit (1) (2) (3) (4) (5) mg/kg Sol. Barium (Ba) <5 <5 <5 <5 <5 1000 Sol. Lead (Pb) <5 <5 <5 <5 <5 90 Sol. Cadmium (Cd) <5 <5 <5 <5 <5 75 Sol. Antimony (Sb) <5 <5 <5 <5 <5 60 Sol. Selenium (Se) <5 <5 <5 <5 <5 500 Sol. Chromium (Cr) <5 <5 <5 <5 <5 60 Sol. Mercury (Hg) <5 <5 <5 <5 <5 60 Sol. Arsenic (As) <2.5 <2.5 <2.5 <2.5 <2.5 25

Result in mg/kg Limit (6) (7) (8) (9) (10) mg/kg Sol. Barium (Ba) <5 <5 <5 12 <5 1000 Sol. Lead (Pb) <5 <5 <5 <5 <5 90 Sol. Cadmium (Cd) <5 <5 <5 <5 <5 75 Sol. Antimony (Sb) <5 <5 <5 <5 <5 60 Sol. Selenium (Se) <5 <5 <5 <5 <5 500 Sol. Chromium (Cr) <5 <5 <5 <5 <5 60 Sol. Mercury (Hg) <5 <5 <5 <5 <5 60 Sol. Arsenic (As) <2.5 <2.5 <2.5 <2.5 <2.5 25

Sol. = Soluble < = Less than mg/kg = milligram per kilogram Tested Components :



*********************************************************************************************************************************



Tests Conducted

*HJ01254244* of 35



19 Physical and Mechanical Test As per Canada Consumer Product Safety Act Toys Regulations SOR/2011-17. Applicant's specified age group for testing : For ages over 3 years.

The submitted samples were undergone the use and abuse tests in accordance with the Canada Consumer Product Safety Act Toys Regulations(SOR/2011-17):

Test Parameter

Drop test 4 x 3.0 ft

Pull test 10 lbf

Push test 10 lbf

No. Testing Items Assessment 3 General - English and French bilingual statement # 4 Packaging P# Electrical hazard 5 Electrically operated toys NA 6 Electrically heated toys NA Mechanical hazard 7 Small parts NA 8 Metal edges NA 9 Wire frames NA 10 Plastic edges P 11 Wooden surfaces, edges and corners NA 12 Glass NA 13 Fasteners NA 14 Folding mechanism, bracket or bracing NA 15 Spring-wound driving mechanisms NA 16 Projectile components NA 17 Toys which a child can enter and which can be closed by a lid or door NA 18 Stationary toy that is intended to bear the weight of a child NA Auditory hazards

19 Noise limit NA Thermal hazards

20 Heated surfaces, parts or substances NA Dolls, plush toys and soft toys

28 Fastenings to attach parts, clothing or ornamentation NA 29 Stuffing materials (a) Clean and free from vermin NA (b) Free from hard and sharp foreign matter NA

30 Small parts -Squeaker, reed, valve or other similar device NA



Tests Conducted

*HJ01254244* of 35



No. Testing Items Assessment 31 Eyes and noses NA Plant seeds

35 Plant seeds for making noise NA 36 Plant seeds for stuffing material NA 37 Pull and push toys that has a shaft-like handle NA 38 Toy steam engines boilers NA 39 Finger paints NA 40 Rattle NA 41 Elastics NA 42 Yo-yo type balls (a) Stretchable cords NA (b) Similar product NA

43 Batteries NA Remark : P = Pass NA = Not Applicable # = As requested by applicant, the poly bag warning as specified in sections 3 and 4 were not

assessed. Date sample received : Dec 01, 2011 and Dec 14, 2011 Testing period : Dec 01, 2011 to Dec 09, 2011 and Dec 14, 2011 to Dec 15, 2011

20 Cellulose Nitrate and Celluloid As per Canada Consumer Product Safety Act Toys Regulation SOR 2011-17 Section 21.

Assessment Requirement Cellulose Nitrate/Celluloid Absent Absent


*********************************************************************************************************************************



Tests Conducted

*HJ01254244* of 35



21 Toxic Elements Analysis

As per Canada Consumer Product Safety Act Toys Regulation SOR/2011-17 Section 23, by acid digestion and extraction methods were used and toxic elements content were determined by Inductively Coupled Argon Plasma Spectrometry.

Result in mg/kg Limit(mg/kg) Tot. Lead (Pb) <10 90 Tot. Mercury (Hg) ND ND Sol. Cadmium (Cd) <10 1000 Sol. Antimony (Sb) <10 1000 Sol. Selenium (Se) <10 1000 Sol. Arsenic (As) <10 1000 Sol. Barium (Ba) <10 1000

mg/kg = milligram per kilogram Tot. = Total Sol. = Soluble < = Less than ND = Not detected (<0.078 mg/kg) Tested Component : Coatings on paper label (ED010 pack sticker). Date sample received : Dec 01, 2011 Testing period : Dec 01, 2011 to Dec 09, 2011

*********************************************************************************************************************************



Tests Conducted

*HJ01254244* of 35



22 Mechanical and Physical Test As per Japan Toy Safety Standard ST2002, September 01, 2009 : Part 1. Applicant's specified age group for testing : For ages over 3 years.

Clause Testing Items Assessment 4.1 Materials NA 4.2* Construction 4.2.1 General requirements P 4.2.2 Requirements applicable to certain types of toys NA 6 Packaging P 7.1 Cautionary labelling # 7.2 Informative labelling # Supplement 1 Safety requirements of toys intended for children under the age of 3

years

1) Small parts NA 2) Small balls NA 3) Suction cups NA 4) Hemispherical-shaped toys NA 5) Pre-school play figures NA 6) Related requirements (Cautionary lableling) NA Supplement 2 Safety requirements of toys which contain magnets NA Supplement 3 Safety requirement of food imitation toys NA

Remark : P = Pass NA = Not Applicable * = The following subclauses of clause 4.2 of the standard were applicable: - # = The attention of the applicant was drawn to the need for the item to be labelled in the specified

labelling format according to pl guidelines on cautionary labelling for the clause 7.1 / 7.2 and be labelled with the name or trade mark of the manufacturer, importer or organization responsible for marketing the toy as specified in clause 7.2.1.

Date sample received : Dec 01, 2011 and Dec 09, 2011 Testing period : Dec 01, 2011 to Dec 09, 2011

*********************************************************************************************************************************



Tests Conducted

*HJ01254244* of 35



23 Flammability Test As per Japan Toy Safety Standard : Part 2 : 2002.

Clause Testing items Assessment 3.1 General P 3.2 Beards, moustaches, wigs, masks and other products worn on the

head with hair or other attached materials NA

3.3 Disguise costumes including the associated head wear and other toys intended to be worn by children

NA

3.4 Toys intended to be entered by a child NA 3.5 Filled soft toys NA

Remark : P = Pass NA = Not applicable Date sample received : Dec 01, 2011 Date test started : Dec 01, 2011 to Dec 09, 2011

24 Chemical Properties Analysis on Coloring Matters

As per Specifications and Standards and Testing Methods of �Foodstuffs�, �Implements�, �Containers and Packaging�, �Toys� and �Detergents�, Section IV - Toys, (Notification no. 370 of Ministry of Health, Labour and Welfare, 1959), (Notification no. 153 of Ministry of Health, Labour and Welfare, amendment on 31 March 2008), under the Japan Food Sanitation Law (Law no. 233, 1947).

Test Items Result Requirement (1) (2) (3) (4) (5) Running of coloring matters NR NR NR NR NR NR

Test Items Result Requirement (6) (7) (8) (9) (10) Running of coloring matters NR NR NR NR NR NR

Remark : NR = No Running of coloring matters was observed.

*********************************************************************************************************************************



Tests Conducted

*HJ01254244* of 35



Tested Components :

(1) Blue plastic (pin, clip) (nylon). (2) Black plastic (hinge, construction tool, mini punch) (nylon). (3) Dull black plastic (lid for 8oz cup) (PS). (4) Transparent plastic label (tamper proof sticker) (PET). (5) Paper sheet with printings (poster, instruction sheet, sampler insert) (paper). (6) Paper card with plastic film (diecut features) (paper, OPP). (7) Paper label with printings (sticker sheet) (paper). (8) Paper label with plastic film (sticker- eyes) (paper, OPP). (9) Paper label with coatings (ED010 pack sticker) (paper). (10) Beige paper card (paper cup 8oz) (paper).


25 Chemical Properties Analysis on Coloring Matters As per Japan Toy Safety Standard 2002 (Tenth Edition 2010) Part 3 Chemical Properties clause 1.1.

Test items Result Requirement (1) (2) (3) (4) (5) Running of coloring matters NR NR NR NR NR NR

Test items Result Requirement (6) (7) (8) (9) (10) Running of coloring matters NR NR NR NR NR NR

Remark : NR = No running of coloring matters was observed. Tested Components :

(1) Blue plastic (pin, clip) (nylon). (2) Black plastic (hinge, construction tool, mini punch) (nylon). (3) Dull black plastic (lid for 8oz cup) (PS). (4) Transparent plastic label (tamper proof sticker) (PET). (5) Paper sheet with printings (poster, instruction sheet, sampler insert) (paper). (6) Paper card with plastic film (diecut features) (paper, OPP). (7) Paper label with printings (sticker sheet) (paper). (8) Paper label with plastic film (sticker- eyes) (paper, OPP). (9) Paper label with coatings (ED010 pack sticker) (paper). (10) Beige paper card (paper cup 8oz) (paper).


*********************************************************************************************************************************



Tests Conducted

*HJ01254244* of 35



26 Heavy Metals Content in Paint

As per Japan Toy Safety Standard 2002 (Tenth Edition 2010) Part 3 : Chemical Properties clause 1.5, acid extraction method was used and heavy metals content were determined by Inductively Coupled Argon Plasma Spectrometry.

Result in mg/kg Requirement mg/kg Sol. Barium (Ba) <5 1000 Sol. Lead (Pb) <5 90 Sol. Cadmium (Cd) <5 75 Sol. Antimony (Sb) <5 60 Sol. Selenium (Se) <5 500 Sol. Chromium (Cr) <5 60 Sol. Mercury (Hg) <5 60 Sol. Arsenic (As) <2.5 25

mg/kg = milligram per kilogram Sol. = Soluble < = Less than Component List : Coatings on paper label (ED010 pack sticker).

PVC Coatings X Non-PVC coatings √


*********************************************************************************************************************************



Tests Conducted

*HJ01254244* of 35



27 Heavy Metals Content in Paint Coating

As per Specifications and Standards and Testing Methods of �Foodstuffs�, �Implements�, �Containers and Packaging�, �Toys� and �Detergents�, Section IV - Toys, (Notification no. 370 of Ministry of Health, Labour and Welfare, 1959), (Notification no. 153 of Ministry of Health, Labour and Welfare, amendment on 31 March 2008), under the Japan Food Sanitation Law (Law no. 233, 1947). Result in mg/kg Limit mg/kg Sol. Lead (Pb) <5 90 Sol. Cadmium (Cd) <5 75 Sol. Arsenic (As) <2.5 25

Remark : Sol. = Soluble < = Less than mg/kg = milligram per kilogram Component List : Coatings on paper label (ED010 pack sticker).

PVC coatings X Non-PVC coatings √


**********************************************************************************************************************************End of report

Hong Kong Government Recognized Service Supplierresource.scholastic.com.au/resourceFiles/Toy... ·...

Documents

Transcript of Hong Kong Government Recognized Service Supplierresource.scholastic.com.au/resourceFiles/Toy... ·...