HOMELAND - Amazon Web Servicesvirginiatile.s3.amazonaws.com/profiles/pdf/AUS.HOMELAND.pdfHOMELAND...
Transcript of HOMELAND - Amazon Web Servicesvirginiatile.s3.amazonaws.com/profiles/pdf/AUS.HOMELAND.pdfHOMELAND...
HOMELANDHomeland Silo 76/8”x393/8” - 20x100 cm
LIBERTYLiberty Calacatta Centennial Wall Bullnose 2”x12” - 5x30.5 cm
Liberty Calacatta Centennial Herringbone Wall Mosaic 113/4”x113/4” - 30x30 cm
Wheat Silo
Rye Wool
HOMELANDCOLORED BODY PORCELAIN TILE
COLORS
HOMELANDHomeland Wool 76/8”x393/8” - 20x100 cm
Homeland Rye 76/8”x393/8” - 20x100 cm
REALISTIC GRAINS,TRANQUIL AMBIANCEThe true to nature markings on our HOMELAND collection create a real farmhouse feeling to whatever environment they are in. Available in four different variations of subdued shades and neutral tones.
• Inspired by timeworn oak planks
• Delicate brushed look
• Neutral, warm farmhouse shades
• Realistic grain markings
• Unique and on-trend decors
Wheat
Rye
HOMELANDCOLORED BODY PORCELAIN TILE
Wool
Silo
SHADE VARIATION
HOMELANDCOLORED BODY PORCELAIN TILE
V3 MODERATE VARIATION Compliant with standards ANSI A137.1-2012
LIBERTYLiberty Calacatta Centennial Brick 3 1/8”x123/8”-8x31.5cm
HOMELANDHomeland Wool 76/8”x393/8”-20x100cm
HOMELANDCOLORED BODY PORCELAIN TILE
Homeland Silo Herringbone Mosaic
Homeland Cloud Herringbone Mosaic
MOSAIC PATTERNS
Homeland Sun Herringbone MosaicHomeland Wheat Herringbone Mosaic
Homeland Sun Herringbone Mosaic
HOMELANDSIZE - THICKNESS 76/8”x 393/8” - 20x100 cm 9 mm FINISH MATTE
COORDINATING TRIMS
Bullnose
HOMELAND Wheat 610130000911
Bullnose 2.5”x 20” - 6.2x50 cm
HOMELAND Silo 610130000912
HOMELAND Rye 610130000914
HOMELAND Wool 610130000913
HOMELAND Wheat7 6/8”x393/8” - 20x100 cm610010001759
HOMELAND Silo7 6/8”x393/8” - 20x100 cm610010001760
HOMELAND Wool7 6/8”x393/8” - 20x100 cm610010001761
HOMELAND Rye7 6/8”x393/8” - 20x100 cm610010001762
MOSAICS & DECORS
HOMELAND Wheat Herringbone Mosaic93/8”x11” - 24x28 cm (Mosaic 2”x6”) 610110000328
HOMELAND SiloHerringbone Mosaic93/8”x11” - 24x28 cm (Mosaic 2”x6”) 610110000329
HOMELAND RyeHerringbone Mosaic93/8”x11” - 24x28 cm (Mosaic 2”x6”) 610110000331
HOMELAND Wool Herringbone Mosaic93/8”x11” - 24x28 cm (Mosaic 2”x6”) 610110000330
HOMELAND SunHerringbone Mosaic93/8”x11” - 24x28 cm (Mosaic 2”x6”) 610110000332
HOMELAND Cloud Herringbone Mosaic93/8”x11” - 24x28 cm (Mosaic 2”x6”) 610110000333
Compliant with standards ANSI A137.1-2012V3 MODERATE VARIATION
Bullnose
HOMELAND Wheat 610130000911
Bullnose 2.5”x 20” - 6.2x50 cm
HOMELAND Silo 610130000912
HOMELAND Rye 610130000914
HOMELAND Wool 610130000913
HOMELANDHomeland Sun Herringbone Mosaic 93/8”x11” - 24x28 cm
Homeland Wheat 76/8”x393/8” - 20x100 cm
LIBERTYLiberty Calacatta Centennial 12”x22” - 30.5x56 cm
SUSTAINABILITY
Every Atlas Concorde USA porcelain tile collection is PTCA Certified. Under the program, established jointly by the Porcelain Tile Certification Agency (PTCA) and the Ceramic Tile Distributors Association (CTDA), manufacturers can “prove” their product is truly porcelain (meeting the water absorption criteria of the American national standard - ASTM C373).
LEED (Leadership in Energy and Environmental Design) is a rating system created to encourage the construction of “green” buildings. Developed by the US Green Building Council and internationally recognized, it points out the necessary requirements to build eco-compatible projects, capable of functioning in sustainable and autonomous way in terms of energy consumption as well as having a low environmental impact throughout their entire life-cycle. Atlas Concorde USA is a member of the US Green Building Council.
Atlas Concorde USA is a member of TCNA, a trade association representing manufacturers of ceramic tile, tile installation materials, tile equipment, raw materials, and other tile-related products. The Tile Council is recognized for its leadership role in facilitating the development of North American and international industry quality standards to benefit tile consumers.
Atlas Concorde USA products are low-emitting materials with zero emission of volatile organic compounds (VOC). This can contribute to the awarding of 1 LEED credit.
The Health Product Declaration® logo is a registered trademark of HPD Collaborative.
The Ceramic Tile Distributors Association (CTDA) is an international association of distributors, manufacturers and allied professionals of ceramic tile and related products. CTDA connects, educates and strengthens tile and stone distributors. Atlas Concorde USA is a member of CTDA.
The Health Product Declaration (HPD) Open Standard provides for the disclosure of product contents and potential associated human and environmental health hazards. The HPD Open Standard was created and is maintained and evolved by the HPD Collaborative, a customer-led organization committed to the continuous improvement of building products through transparency, openness, and innovation throughout the product supply chain. Atlas Concorde USA adheres with its own HPD.
An Environmental Product Declaration (EPD) is an independently verified and registered document that communicates transparent and comparable information about the life-cycle environmental impact of products. It is a transparent declaration of the life-cycle environmental impact, which Atlas Concorde USA makes available to customers.
Atlas Concorde USA can provide a Product Environmental Footprint (PEF), a multi-criteria measure of the environmental performance of a good or service throughout its life cycle. PEF information is produced for the overarching purpose of seeking to reduce the environmental impacts of goods and services taking into account supply chain activities.
The GREENGUARD Environmental Institute was founded to improve indoor air quality and reduce chemical exposure. GEI certifies products for low volatile organic compound (VOC) emissions and provides the world’s largest guide to third-party certified, low-emitting products and building materials.
The Health Product Declaration® logo is a registered trademark of HPD Collaborative.
www.atlasconcordeusa.comATLAS CONCORDE USA, INC. - 117 Seaboard Lane - Suite F170 - Franklin, TN 37067 - USA
COLORED BODY PORCELAIN TILE
FINISH MATTESIZE - THICKNESS 76/8”x 393/8” - 20x100 cm 9 mm
PERFORMANCE & FEATURES
Compliant with standards ANSI A137.1-2012
FIELD TILES - Available in all colors
Commercial size (in) Nominal size (in) Thickness (mm) Finish
8"x40" 7 6/8" x 39 3/8" 9 mm Matte
MOSAICS AND COORDINATING TRIMS - Available in all colors
Commercial size (in) Nominal size (in) Thickness (mm) Finish
Herrigbone Mosaic 2”x6” 9 3/8” x 11” 9 mm Matte
Bullnose 2.5” x 20” 9 mm Matte
Please refer to caliber chart for work sizes.Close joints are not recommended.(*): Cove Base thickness is 7 mm on flat top part.
Porcelain Tile Specification
PROPERTY ASTM TEST METHOD
Calibrated RectifiedHOMELAND
Minimum Maximum Minimum Maximum
REGULARITYCHARACTERISTICS
Nominal Size
ASTM C499
-3.00% 3.00% -3.00% 2.00% Compliant
Caliber Range (Variation from average facial dimension of sample)
-0.50% or -0.08 in(-2.0 mm) (*)
0.50% or 0.08 in(2.0 mm) (*)
-0.25% or -0.03 in (-0.8 mm) (*)
0.25% or 0.03 in (0.8 mm) (*)
Compliant
Thickness (1) N/A Range: 0.40 in (1.02 mm) N/A Range: 0.40 in (1.02 mm) Compliant
Wedging ASTM C502 -0.50% or -0.08 in(-2.0 mm) (*)
0.50% or 0.08 in(2.0 mm) (*)
-0.25% or -0.03 in (-0.8 mm) (*)
0.25% or 0.03 in(0.8 mm) (*)
Compliant
Warpage EdgeASTM C485
-0.75% or -0.09 in(-2.3 mm) (*)
0.75% or 0.09 in(2.3 mm) (*)
-0.40% or -0.05 in(-1.3 mm)(2) or -1.8 mm(3) (*)
0.40% or 0.05 in(1.3 mm)(2) or 1.8 mm(3) (*)
Compliant
Warpage Diagonal -0.50% or -0.08 in(-2.0 mm) (*)
0.50% or 0.08 in(2.0 mm) (*)
-0.40% or -0.07 in(-1.8 mm) (*)
0.40% or 0.07 in(1.8 mm) (*)
Compliant
All Porcelain Tiles
STRUCTURAL CHARACTERISTICS
Water Absorption ASTM C373 ≤ 0.5% ≤ 0.5%
BULK MECHANICAL CHARACTERISTICS
Breaking Strength ASTM C648Average ≥ 250 lbf. (1.11 kN)
Individual ≥ 225 lbf. (1.00 kN)≥ 350 lbf. avg
PHYSICAL PROPERTIES
Bond Strength ASTM C482 ≥ 50 psi (0.34 Mpa) ≥ 100 psi
THERMAL AND IGROMETRIC
CHARACTERISTICS
Resistance to Freeze/Thaw Cycling ASTM C1026 As Reported Resistant
CHEMICAL CHARACTERISTICS
Chemical Resistance ASTM C650 As Reported Unaffected
Stain Resistance ASTM C1378 As Reported Unaffected
SAFETY CHARACTERISTICS
Dynamic coefficient of friction DCOF Requires a minimum value of 0.42 for commercial areas that are likely to be wet > 0.42 Wet
(*) Whichever is less(1) May not apply to textured surfaces or tiles with uneven back patterns.(2) Whichever is less, for tiles up to 24’’x24’’ (610 mm x 610 mm).(3) Applies to tiles larger than 24’’x24’’ (610 mm x 610 mm).
V3MODERATE VARIATIONWhile the colors and/or texture present on a single piece of tile will be indicative of the colors and/or texture to be expected on the other tiles, the amount of colors and/or texture on each piece may vary significantly. It is recommended that the range be viewed before selection.
Atla
s Co
ncor
de U
SA |
Mar
ch 2
018
Atlas Concorde reserves the right to modify any product without notice and will not be liable for any direct or indirect damage resulting from such modifications. Colors and optical features of the materials illustrated in this catalogue are to be regarded as mere indications. For information and details relating to codes, packaging and weight it is recommended to refer to the latest pricelist.
© Copyright Atlas Concorde USA, Inc. 2018The reproduction of the work, fully or in part, is strictly forbidden.